BIS - LIMS (Laboratory Information Management System)

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 [email protected]

Scope List

Reset

137 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

- View breakup
Rs. 2,60,250/- for 1 core (upto 11 kV); Rs. 2,69,700/- for 1 core (above 11 kV); Rs. 3,14,930/- for 3 core (upto 11kV); Rs. 3,24,380/- for 3 coce (above 11 kV) ; Multicore cables: additional charges Rs. 500/- per core per test; Restricted to Rs. 50,625/- for single core Excluding Partial discharge test, bending test followed by partial discharge test, Heating cycle test followed by partial discharge test, impulse withstand test. For multi core cables, extra charges @ 35 % for each additional core shall be levied for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Termination will be in customer scope for cables above 11kV

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

89550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	-
7.0(Construction)	-	27880	Above Test charges included test charges of construction, terminals , external & internal wiring: 2000 Rs. Test charges for vibration test (applicable for rough service luminary only): 25880 Rs. Total charges : (2000 + 25880) = 27880 Rs.
8.0(Creepage Distance and Clearances)	-	500	-
9.0(Provision for earthing)	-	500	-
10.0(Terminals)	-	0	-
11.0(External & Internal Wiring)	-	0	-
12.0(Protection against electric shock)	-	500	-
13.0(Endurance Tests and Thermal Tests)	-	17600	Above test charges for endurance test is 11600 Rs. , test charges for thermal test normal test is 3000 Rs. , test charges for thermal test abnormal test is 3000 Rs. Total test charges : (11600 + 3000 + 3000) = 17600 Rs.
14.0(Resistance to Dust & Moisture)	-	9000	Above Test charges for resistance to dust IP1X/2X/3X/4X : 1500 Rs. , IPX1/X2 : 2000 Rs. Also Test charges for resistance to moisture is 5500 Rs. Total test charges : (1500 + 2000 + 5500) = 9000 Rs.
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	12070	Above test charges included charges of resistance to heat is 1500 Rs. , resistance to fire is 3500 Rs. , resistance to fire (Glow wire test) is 5000 Rs., resistance to tracking is 2070 Rs. Total test charges : (1500+3500+5000+2070)=12070 Rs.
17.0(Photometric Test)	-	20000	-

Complete

-
-

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

89550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	-
7(Construction)	-	27880	Above test charges included charges of construction, terminals, external & internal wiring: 2000 Rs. and vibration test charges: 25880 Rs. Total test charges: (2000 + 25880)= 27880 Rs.
8(Creepage Distance and Clearances)	-	500	-
9(Provision for earthing)	-	500	-
10(Terminals)	-	0	-
11(External & Internal Wiring)	-	0	-
12(Protection against electric shock)	-	500	-
13(Endurance Tests and Thermal Tests)	-	17600	Above test charges included charges of endurance test: 11600 Rs., and charges of thermal normal test: 3000 Rs. and abnormal test: 3000 Rs. Total test charges: (11600 + 3000 + 3000)= 17600 Rs.
14(Resistance to Dust and Moisture)	-	9000	Above test charges included charges of resistance to dust IP1X/2X/3X/4X: 1500 Rs. , Charges of IPX1/X2: 2000 Rs., and charges of Resistance to moisture: 5500 Rs. Total test charges : (1500+2000+5500)= 9000 Rs.
15(Insulation Resistance and Electric Strength)	-	1000	-
16(Resistance to Heat , fire and tracking)	-	12070	Above Test charges included charges of resistance to heat: 1500 Rs. , Charges of resistance to fire: 3500 Rs. , resistance to fire (glow wire test): 5000 Rs., resistance to tracking : 2070 Rs. Total test charges: (1500+3500+5000+2070)=12070 Rs.
17(Photometric Test)	-	20000	-

Complete

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

93899 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	-
7.0(Construction)	-	27880	Above test charges included charges of construction, terminals, external & internal wiring: 2000 Rs. and vibration test charges: 25880 Rs. Total test charges: (2000 + 25880)= 27880 Rs.
8.0(Creepage Distance and Clearances)	-	500	-
9.0(Provision for earthing)	-	500	-
10.0(Terminals)	-	0	-
11.0(External & Internal Wiring)	-	0	-
12.0(Protection against electric shock)	-	500	-
13.0(Endurance Tests and Thermal Tests)	-	17600	Above test charges included charges of endurance test: 11600 Rs., and charges of thermal normal test: 3000 Rs. and abnormal test: 3000 Rs. Total test charges: (11600 + 3000 + 3000)= 17600 Rs.
14.0(Resistance to Dust & Moisture)	-	13349	Above test charges included charges of resistance to dust IP 54/IP65/IP66: 7849 Rs., and charges of Resistance to moisture: 5500 Rs. Total test charges : (7849+5500)= 13349 Rs.
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	12070	Above Test charges included charges of resistance to heat: 1500 Rs. , Charges of resistance to fire: 3500 Rs. , resistance to fire (glow wire test): 5000 Rs., resistance to tracking : 2070 Rs. Total test charges: (1500+3500+5000+2070)=12070 Rs.
17.0(Photometric Test)	-	20000	-

Complete

-
-

IS 13340 : PART 1 (2012)

Shunt power capacitors of the self - Healing type for AC systems having a rated voltage up to and including 1000 V: Part 1 general - Performance, testing and rating - Safety requirements - Guide for installation and operation (First Revision)

up to 50kVAr

237725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Capacitance Measurement and Output Calculation)	-	1365	-
8(Measurement of the tangent of the loss angle (tan δ) of the capacitor)	-	2730	-
9.1(Voltage test between terminals)	-	1365	-
10.1(Voltage test between terminals and container)	-	700	-
11(Test of Internal Discharge Device)	-	1365	-
12(Sealing Test)	-	1365	-
13 & Table 2-Ambient air temperature for the thermal stability test(Thermal Stability Test)	-	26650	12,300/- for 0-4 KVAR, 13,650/- for 5-10 KVAR, 16,400/- for 11-25 KVAR, 26,650/- for 26-50 KVAR
14(Measurement of the tangent of the loss angle (tan δ) of the capacitor at elevated temperature)	-	3450	-
9.2(Voltage test between terminals)	-	1365	-
10.2(Voltage test between terminals and container)	-	700	-
16(Discharge Test)	-	4100	-
17 & IEC 60831-2(Ageing Test)	-	130000	95,550/- for 0-10 KVAR, 1,02,500/- for 11-25 KVAR, 1,30,000/- for 26-50 KVAR
18 & IEC 60831-2(Self-Healing Test)	-	4800	4100/- for 0-25 KVAR, 4800/- for 26-50 KVAR
15(Lightning impulse voltage test between terminals and container)	-	3780	-
19 & IEC 60831-2(Destruction Test)	-	45100	22,550/- for 0-25 for KVAR, 45,100/- for 26-50 KVAR

Complete

-
-

IS 13340 : Part 2 (2012)

Shunt power capacitors of the self - Healing type for AC systems having a rated voltage up to and including 1000 V: Part 2 ageing test, self - Healing test and destruction test

up to 50kVAr

- View breakup
Routine Tests : Rs. 8,890/-, Type Tests : upto 4 kVar : Rs. 1,56,785/-, For 5 to 10 kVar : Rs. 1,58,135/-, For 11 to 25kVar ; Rs. 1,67,835/-, For 26 to 50 kVar ; Rs. 2,28,835/- [25% discount for BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 13585 : Part 1 (2012)

Shunt power capacitors of the non - Self - Healing type for ac systems having a rated voltage up to and including 1 000 v: Part 1 general - Performance, testing and rating - Safety requirements - Guide for installation and operation (First Revision)

up to 50kVAr

209790 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Capacitance measurement and output calculation : Measuring procedure )	-	1260	capacitance and output up to 50kVAR
8.1(Measurement of the tangent of the loss angle (tan S) of the capacitor)	-	2520	tan delta up to 50kVAR
9.1(Voltage test between terminals (routine test))	-	1260	voltage test between terminal routine up to 50kVAR
9.2(Voltage test between terminals (type test))	-	1260	voltage test between terminal type up to 50kVAR
10.1(Voltage test between terminals and containe (Routine test))	-	630	voltage test between terminal and container routine up to 50kVAR
10.2(Voltage test between terminals and container (type test))	-	1260	voltage test between terminal and container type up to 50kVAR
11(Test of internal discharge device)	-	1260	internal discharge up to 50kVAR
12(Sealing test)	-	1260	sealing up to 50kVAR
13(Thermal stability test)	-	20790	7560/- for 0-4kVAR 8820/-for 5-10kVAR 11740/- for 11 - 25kVAR 20790/- for 26-50kVAR
14(Measurement of the tangent of the loss angle (tan 8) of the capacitor at elevated temperature)	-	3150	tan delta at elevated up to 50kVAR
16(Discharge test)	-	2520	discharge test up to 50kVAR
17(Ageing test)	-	119700	88200/- for 0-10kVAR 94500/- for 11-25kVAR 119700/- for 26-50kVAR
19(Destruction test)	-	41580	20790/- for 0-25kVAR 41580/- for 26-50kVAR
15(Lightning impulse voltage test between terminals and container ()	-	3780	LIV up to 50kVAR

Complete

-
-

IS 13730 : Part 3 (2012)

Specifications for particular types of winding wires: Part 3 polyester enamelled round copper wire, class 155 (First Revision)

834350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Nominal Conductor diameter)	-	500	-
4(Conductor tollerance )	-	500	-
4(Minimum increase due to the insulation)	-	500	-
4(Maximum overall diameter)	-	500	-
5(Electrical resistance)	-	600	-
6(Elongation)	-	600	-
7(Springiness)	-	500	-
8(Flexibility and adherence)	-	850	-
8(Stretching test (nominal conductor diameters over 1,600 mm))	-	850	-
8(Jerk test (nominal conductor diameters up to and including 1,000 mm))	-	850	-
8(Peel test (nominal conductor diameters over 1,000 mm))	-	850	-
9( Heat shock)	-	600	-
10( Cut-through)	-	800	-
11(Resistance to abrasion :Minimum average force to failure )	-	800	-
11(Resistance to abrasion :Minimum force to failure of each measurement )	-	800	-
12(Resistance to solvents)	-	650	-
13(Breakdown voltage )	-	1450	-
14(Continuity of insulation )	-	550	-
15(Temperature index)	-	821600	-

Complete

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

66800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	3000	-
10(PROVISION FOR EARTHING)	-	1500	-
11(MOISTURE RESISTANCE)	-	7500	-
12(Electric Strength)	-	2000	-
14(Fault conditions)	-	6000	-
15(Transformer heating)	-	20000	Test charges for transformer heating (Normal operation): 10000 Rs. Test charges for transformer heating (Abnormal operation): 10000 Rs. Total charges for transformer heating : 10000 + 10000 = 20000 Rs.
16(Construction)	-	6000	-
17(Creepage distance and clearances)	-	1000	-
18(Screws, current carrying parts and connections)	-	3000	-
19(Resistance to heat, fire and tracking)	-	11800	Test charges for RESISTANCE TO HEAT : 1500 Rs. , Test charges for RESISTANCE TO FIRE (NEEDLE FLAME TEST) : 3500 Rs. Test charges for RESISTANCE TO FIRE (GLOW WIRE TEST): 5000 Rs. , Test charges for RESISTANCE TO TRACKING (Tracking Index) : 1800 Rs.
20(Resistance to corrosion)	-	2000	-

Complete

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	-
6(Interchangeability)	-	2000	-
7(Protection against accidental contact with live parts)	-	5000	-
8(Insulation Resistance and Electric Strength)	-	10000	-
9(MECHANICAL STRENGTH)	-	3000	-
10(cap temperature)	-	7000	-
11(Resistance to Heat)	-	3000	-
12(Resistance to Flame and Ignition)	-	10000	-
13(Fault conditions)	-	10000	-
14(Creepage distance and clearances)	-	1000	-

Complete

-
-

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Terminals)	-	3000	-
9(PROVISION FOR EARTHING)	-	1500	-
10(Protection against accidental contact with live parts)	-	2000	-
11(Mositure Resistance and Insulation)	-	7500	-
12(Electric Strength)	-	2000	-
13(Fault conditions)	-	6000	-
15(Construction)	-	6000	-
16(Creepage distance and clearances)	-	1000	-
17(Screws, current carrying parts and connections)	-	3000	-
18(Resistance to heat, fire and tracking)	-	12000	-
19(Resistance to corrosion)	-	2000	-

Complete

-
-

IS 16103 : Part 2 (2012)

Led modules for general lighting: Part 2 performance requirements

561500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Module Power)	-	0	-
8(Light Output)	-	50000	Above Test charges included charges of module power, Luminous flux, module efficacy are 25000 Rs. and Charges of Luminous Intensity is 25000 Rs. So total test charges: (25000+25000)= 50000 Rs.
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	25000	-
10(LED Module Life)	-	415000	Above Test charges included charges of Lumen maintenance: 120000 Rs, Endurance Test a) Temp. Cycling test: 180000, b) Supply switching test: 15000, c) Acceleration operation life test: 100000. Total Test charges:(120000+180000+15000+100000) = 415000 Rs.
13(Test for Emission (Radiated and Conducted) of radio frequency distribution)	-	67000	-
6(Dimensions)	-	3000	-

Complete

-
-

IS 16104 (2012)

D.C. or A.C. supplied electronic control gear for led modules - Performance requirements

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	1000	-
7.2(Output voltage and Current)	-	10000	Above Test charges included Cl. No. 7.3 Capacitive load requirement and Cl. No. 7.4 Voltage Surges During Switching and Operation.
8(Total Circuit Power)	-	6000	Above test charges included charges of total circuit power, charges of circuit power factor & charges of supply current.
9(Circuit Power Factor)	-	0	-
10(Supply Current)	-	0	-
12(Operational test for abnormal conditions)	-	10000	-
13(Endurance)	-	25000	-
11(Impedance at audio frequencies)	-	0	-
7.3(Capacitive Load Requirement)	-	0	-
7.4(Voltage surge during switching and operation)	-	0	-

Complete

-
-

IS 16107 : Part 2 : Sec 1 (2012)

Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire

476500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Total Input Power)	-	15000	Above test charges included total input power, Luminous flux, luminous efficacy.
8(Light Output)	-	25000	Above test charges for Luminous Intensity Distribution.
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	20000	-
10(LED Luminaire Life)	-	415000	Above test charges included for lumen maintenance charges i.e. 120000, Temp. cycling test charges: 180000, Supply switching test charges: 15000, and acceleration operation life test charges: 100000. Total charges: (120000+180000+15000+100000)= 415000.

Complete

-
-

IS/IEC 60947 : Part 4 : Sec 1 (2012)

Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 9283 (2013)

Motors for submersible pumpsets - Specification (Second Revision)

Voltage: up to 440 V Power: up to 110 kW, Size:upto 6''

45900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Construction, IS 9283)	-	15200	-
5.2.1(Earthing, IS 9283)	-	400	-
5.5(Finish of Bearings, IS 9283)	-	800	-
5.6(Balancing of Rotor, IS 9283)	-	2700	-
13(Terminal Markings, IS 9283)	-	500	-
15.1(Marking, IS 9283)	-	500	-
19(Temperature rise test, IS 9283)	-	12000	-
19(Temperature rise test, IS 9283)	-	9000	-
20(High Voltage test, IS 9283)	-	550	-
21(Insulation Resistance test, IS 9283)	-	550	-
23(Leakage Current test, IS 9283)	-	1000	-
7.1(Dimensions of Motors, IS 9283)	-	1500	-
7.2.2(Tolerances, IS 9283)	-	1200	-

Complete

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

93899 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	-
7.0(Construction)	-	27880	Above test charges included of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING charges : 2000 , and Vibration test charges : 25880 Total Test Charges: (2000+25880)=27880.
8.0(Creepage Distance and Clearances)	-	500	-
9.0(Provision for earthing)	-	500	-
10.0(Terminals)	-	0	-
11.0(External & Internal Wiring)	-	0	-
12.0(Protection against electric shock)	-	500	-
13.0(Endurance Tests and Thermal Tests)	-	17600	Above Test charges included charges of endurance test: 11600 and thermal test normal : 3000 , thermal test abnormal: 3000. Total Test Charges: (11600+3000+3000)= 17600.
14.0(Resistance to Dust & Moisture)	-	13349	Above Test charges included charges of resistance to dust: 7849, Resistance to moisture: 5500. Total test charges: (7849+5500)= 13349.
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	12070	Above Test charges included charges of RESISTANCE TO HEAT: 1500, RESISTANCE TO FIRE [NEEDLE FLAME TEST]: 3500, RESISTANCE TO FIRE [GLOW WIRE TEST]: 5000, RESISTANCE TO TRACKING [Tracking Index]: 2070. Total Test Charges: (1500+3500+5000+2070)= 12070.
17.0(Photometric Test)	-	20000	-

Complete

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

73899 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	-
7.0(Construction)	-	27880	Above test charges included charges of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING: 2000, and charges of Vibration test : 25880. Total Test Charges: (2000+25880)=27880.
8.0(Creepage Distance and Clearances)	-	500	-
9.0(Provision for earthing)	-	500	-
10.0(Terminals)	-	0	-
11.0(External & Internal Wiring)	-	0	-
12.0(Protection against electric shock)	-	500	-
13.0(Endurance Tests and Thermal Tests)	-	17600	Above test charges included charges of ENDURANCE TEST: 11600, charges of thermal normal test: 3000 and thermal abnormal charges: 3000 Total charges : (11600+3000+3000)= 17600.
14.0(Resistance to Dust & Moisture)	-	13349	Above Test charges included charges of Resistance to dust [IP 54/IP65/IP66]: 7849, charges of RESISTANCE TO MOISTURE: 5500, Total Test charges: (7849+5500)= 13349.
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	12070	Above test charges included charges of RESISTANCE TO HEAT: 1500, and charges of [NEEDLE FLAME TEST]: 3500, charges of [GLOW WIRE TEST]: 5000, charges of RESISTANCE TO TRACKING : 2070. Total test charges: (1500+3500+5000+2070)= 73899.

Complete

-
-

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

127899 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	500	-
7.0(Construction)	-	27880	Above test charges included charges of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING: 2000, charges of Vibration test : 25880. Total Test Charges: (2000+25880)= 27880.
8.0(Creepage Distance and Clearances)	-	500	-
9.0(Provision for earthing)	-	500	-
10.0(Terminals)	-	0	-
11.0(External & Internal Wiring)	-	0	-
12.0(Protection against electric shock)	-	500	-
13.0(Endurance Tests and Thermal Tests)	-	17600	Above test charges included of charges ENDURANCE TEST: 11600, charges of thermal normal test: 3000, thermal abnormal charges: 3000. Total test charges: (11600+3000+3000)= 17600.
14.0(Resistance to Dust & Moisture)	-	13349	Above test charges included charges of Resistance to dust [IP 54/IP65/IP66]: 7849, charges of RESISTANCE TO MOISTURE: 5500. Total test charges: (7849+5500)= 13349.
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	12070	Above test charges included charges of RESISTANCE TO HEAT: 1500, [NEEDLE FLAME TEST] charges: 3500, [GLOW WIRE TEST]: 5000, RESISTANCE TO TRACKING: 2070. Total test charges: (1500+3500+5000+2070)=12070
17.0(Functional Safety)	-	30000	-
18.0(Changeover Operation)	-	6000	-
19.0(High Temperature Operation)	-	6000	-
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	6000	-
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	3000	-
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	3000	-

Complete

-
-

IS 13585 Part 2 (2013)

Shunt power capacitors of the non - Self - Healing type for A.C. systems having a rated voltage up to and including 1 000 v: Part 2 ageing test and destruction test

- View breakup
Up to 10 kVAR Rs. 1,08,990/- ; 11 to 25 kVAR Rs. 1,15,290/- ; 26 to 50 kVAR Rs. 1,61,280/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS/IEC 60079 : Part 1 (2014)

Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d"

92700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Openings for breathing or draining)	-	6000	Documentation charges
10.3(Composition limits)	-	0	charges included documentation charges
10.4(Dimensions)	-	0	charges included documentation charges
10.5(Elements with measurable paths)	-	0	-
10.6(Elements with non-measurable paths)	-	0	-
10.7.1(Removable devices)	-	0	-
10.7.2(Mounting arrangements of the elements)	-	0	-
10.7.2(Mounting arrangements of the elements)	-	0	-
10.7.2(Mounting arrangements of the elements)	-	0	-
10.8(Mechanical strength)	-	2000	-
10.9(Breathing devices and draining devices when used as Ex components)	-	0	refer sub clause
10.9.1(General)	-	0	-
10.9.2(Mounting arrangements of the elements and components)	-	0	-
10.9.2(Mounting arrangements of the elements and components)	-	0	-
10.9.3.3(Test for non-transmission of an internal ignition - Test procedure as per Cl 10.9.3.3.2)	-	12200	-
10.9.3.4(Test of the ability of the breathing and draining device to withstand pressure -Test procedure as per Cl 10.9.3.4.1)	-	4500	-
10.9.4(Ex component certificate)	-	0	charges included documentation charges
6(Sealed joints)	-	3200	-
6.1(Cemented joints)	-	0	refer cl. no. 6 charges
6.1.1(General)	-	0	refer cl. no. 6 charges
6.1.2(Mechanical strength)	-	0	refer cl. no. 6 charges
6.1.2(Mechanical strength)	-	0	refer cl. no. 6 charges
6.1.2(Mechanical strength)	-	0	refer cl. no. 6 charges
6.1.3(Width of cemented joints)	-	0	refer cl. no. 6 charges
6.2(Fused glass joints)	-	0	refer cl. no. 6 charges
6.2.2(Width of fused glass joints)	-	0	refer cl. no. 6 charges
15.2.2(Determination of explosion pressure (reference pressure))	-	10800	-
13.1(Entries for flameproof enclosures)	-	3200	-
13.1(Entries for flameproof enclosures)	-	0	refer cl. no. 13.1
13.2(Threaded holes)	-	0	refer cl. no. 13.1
13.2(Threaded holes)	-	0	refer cl. no. 13.1
13.3(Non-threaded holes (for Group I only))	-	0	refer cl. no. 13.1
13.4(Cable glands)	-	0	refer cl. no. 13.1
13.4(Cable glands)	-	0	refer cl. no. 13.1
13.5.1(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.1(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.2(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.3(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.3(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.5.3(Conduit sealing devices)	-	0	refer cl. no. 13.1
13.6.1(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.2(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.3(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.4(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.6.5(Plugs and sockets and cable couplers)	-	0	refer cl. no. 13.1
13.7(Bushings)	-	0	refer cl. no. 13.1
13.7(Bushings)	-	0	refer cl. no. 13.1
13.8(Blanking elements)	-	0	refer cl. no. 13.1
13.8(Blanking elements)	-	0	refer cl. no. 13.1
13.8(Blanking elements)	-	0	refer cl. no. 13.1
11.1(Fasteners and openings)	-	2300	-
11.2(Fasteners and openings)	-	0	refer cl. no. 11.1
11.3(Fasteners and openings)	-	0	refer cl. no. 11.1
11.4(Fasteners and openings)	-	0	refer cl. no. 11.1
11.5(Fasteners and openings)	-	0	refer cl. no. 11.1
11.6(Fasteners and openings)	-	0	refer cl. no. 11.1
11.7(Fasteners and openings)	-	0	refer cl. no. 11.1
11.8(Fasteners and openings)	-	0	refer cl. no. 11.1
11.9(Fasteners and openings)	-	0	refer cl. no. 11.1
5(Flameproof joints)	-	3200	-
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.1(General requirements)	-	0	refer cl. no. 5
5.2(Non-threaded joints)	-	0	refer cl. no. 5
5.2.1(Width of joints (L))	-	0	refer cl. no. 5
5.2.1(Width of joints (L))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.2(Gap (i))	-	0	refer cl. no. 5
5.2.3(Spigot joints)	-	0	refer cl. no. 5
5.2.4(Holes in joint surfaces)	-	0	refer cl. no. 5
5.2.5(Conical joints)	-	0	refer cl. no. 5
5.2.6(Joints with partial cylindrical surfaces (not permitted for Group IIC))	-	0	refer cl. no. 5
5.2.6(Joints with partial cylindrical surfaces (not permitted for Group IIC))	-	0	refer cl. no. 5
5.2.7(Flanged joints for acetylene atmospheres)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.8(Serrated joints)	-	0	refer cl. no. 5
5.2.9(Multi-step joints)	-	0	refer cl. no. 5
5.2.9(Multi-step joints)	-	0	refer cl. no. 5
5.2.9(Multi-step joints)	-	0	refer cl. no. 5
5.3(Threaded joints)	-	0	refer cl. no. 5
5.4(Gaskets (including O-rings))	-	0	refer cl. no. 5
5.4(Gaskets (including O-rings))	-	0	refer cl. no. 5
5.5(Equipment using capillaries)	-	0	refer cl. no. 5
9(Light-transmitting parts)	-	0	Included in documentation charges
20(Marking)	-	2000	-
20.1(General)	-	0	refer cl. no. 20
20.2(Caution and warning markings)	-	0	refer cl. no. 20
20.3(Informative markings)	-	0	refer cl. no. 20
12.1(Materials)	-	0	Included in documentation charges
12.2(Materials)	-	0	Included in documentation charges
12.3(Materials)	-	0	Included in documentation charges
12.4(Materials)	-	0	Included in documentation charges
12.5(Materials)	-	0	Included in documentation charges
12.6(Materials)	-	0	Included in documentation charges
12.7(Materials)	-	0	Included in documentation charges
12.8(Materials)	-	0	Included in documentation charges
7(Operating rods)	-	3200	-
7(Operating rods)	-	0	refer cl. no. 7
8.1.1(Joints of shafts)	-	3200	-
8.1.1(Joints of shafts)	-	0	refer cl. no. 8.1.1
8.1.2(Cylindrical joints)	-	0	refer cl. no. 8.1.1
8.1.3(Labyrinth joints)	-	0	refer cl. no. 8.1.1
8.1.4(Joints with floating glands)	-	0	refer cl. no. 8.1.1
8.2.1(Sleeve bearings)	-	0	refer cl. no. 8.1.1
8.2.1(Sleeve bearings)	-	0	refer cl. no. 8.1.1
8.2.2(Rolling-element bearings)	-	0	refer cl. no. 8.1.1
19.4(Test of erosion by flame)	-	21600	-
15.2.3.2(Overpressure test – First method (static))	-	15300	-

Complete

-
-

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

- View breakup
Rs. 26,050/- ; Restricted to Rs. 18,900/- for 1kW to 3kW for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
REVISED VERSION OF IS 368:2014 INCLUDED.

IS 13730 : Part 13 (2014)

Specifications for particular types of winding wires: Part 13 polyester or polyesterimide overcoated with polyamide - Imide enamelled round copper wire, class 200 (First Revision)

- View breakup
Rs. 8,95,150/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
REVISED VERSION OF IS 13730(PT-13):2014 INCLUDED.

IS 13730 : Part 17 (2014)

Specifications for particular types of winding wires: Part 17 polyvinyl acetal enamelled rectangular copper wire, class 105 (First Revision)

- View breakup
Rs.8,29,650/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

- View breakup
Rs. 99,500/- (Upto and including 10kVA); Restricted to Rs. 98,230/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Excluding following tests: Components (Cl.4.5/RD Cl. 1.5; PCB Material (RD Cl. 2.10.6); Appliances Semiconductor devices (RD Cl. 2.10.5.4); Batteries (RD Cl. 4.3.8); Thin sheet Material (RD Cl. 2.10.5.6).

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

Cell and Battery capacity up to 3000 Ah. (Lead acid & N

1760000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	0	-
5.1(Mechanical Endurance)	-	0	-
5.2(Charge efficiency)	-	0	-
5.3(Deep discharge protection)	-	0	-
5.4(Marking)	-	0	-
5.5(Dafety)	-	0	-
5.6(Documentation)	-	0	-
6(Finctional Characteristics)	-	0	-
7(General test conditions)	-	0	-
8.1(Capacity test)	-	24000	Rating capacity - up to and including 250Ah :15000/- , more than 250Ah to up to and including 500Ah : 20000/-, more than 500ah to up to and including 1000Ah : 23000/- , more than 1000Ah to up to and including 3000Ah : 24000/- , for Nickel : 15000/-
8.2(Endurance test)	-	549000	Rating capacity - up to and including 250Ah :190000/- , more than 250Ah to up to and including 500Ah : 276000/-, more than 500ah to up to and including 1000Ah : 323000/- , more than 1000Ah to up to and including 3000Ah : 549000/- , for Nickel : 438000/-
8.3(Charge retention test)	-	69000	Rating capacity - up to and including 250Ah :32000/- , more than 250Ah to up to and including 500Ah : 40000/-, more than 500ah to up to and including 1000Ah : 45000/- , more than 1000Ah to up to and including 3000Ah : 69000/- , for Nickel : 30000/-
8.4(Cycle endurance in Photovoltaic application)	-	871000	Rating capacity - up to and including 250Ah :415000/- , more than 250Ah to up to and including 500Ah : 683000/-, more than 500ah to up to and including 1000Ah : 826000/- , more than 1000Ah to up to and including 3000Ah : 871000/- , for Nickel : 416000/-
8.5(Sulphation Test)	-	90000	Rating capacity - up to and including 250Ah : 27000/- , more than 250Ah to up to and including 500Ah : 44000/-, more than 500ah to up to and including 1000Ah : 52000/- , more than 1000Ah to up to and including 3000Ah : 90000/- , for Nickel : 38000/-
8.6(Water loss test)	-	132000	Rating capacity - up to and including 250Ah : 43000/- , more than 250Ah to up to and including 500Ah : 63000/-, more than 500ah to up to and including 1000Ah : 75000/- , more than 1000Ah to up to and including 3000Ah : 132000/- , for Nickel : 64000/-
8.7(Non spillability)	-	25000	Rating capacity - up to and including 250Ah : 16000/- , more than 250Ah to up to and including 500Ah : 21000/-, more than 500ah to up to and including 1000Ah : 24000/- , more than 1000Ah to up to and including 3000Ah : 25000/- , for Nickel : 16000/-

Complete

-
-

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

- View breakup
Rs. 2,20,000/- up to 20 KW and Rs. 3,00,000/- above 20.1 KW to 50 KW

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Scope restricted Except for following tests : Cl. No. 8.3 Stability test, Cl. No. 9.1.3.2 Material for fire enclosure

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

328746 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification, IS 60898-1)	-	500	-
4.4(Classification, IS 60898-1)	-	500	-
4.3(Classification, IS 60898-1)	-	500	-
4.5(Classification, IS 60898-1)	-	500	-
4.5.1(Classification, IS 60898-1)	-	500	-
4.5.2(Classification, IS 60898-1)	-	500	-
4.6(Classification, IS 60898-1)	-	500	-
4.7(Classification, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
8.1.1(General, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.3(Clearances and creepage distances, IS 60898-1)	-	650	-
8.1.4.1(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.4.2(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.4.3(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.4.4(Reliability of Screws current carrying parts and connections IS 60898-1)	-	500	-
8.1.5.1(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.2(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.3(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.4(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.5(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.6(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.7(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.8(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.9(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.10(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.11(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.1.5.12(Reliability of terminals for external conductors, IS 60898-1)	-	500	-
8.2(Protection against Electric Shock, IS 60898-1)	-	500	-
8.3.2(Dielectric strength at power frequency, IS 60898-1)	-	500	-
8.3.3(Isolating capability, IS 60898-1)	-	500	-
8.3.4(Dielectric strength at rated impulse withstand voltage ( Uimp), IS 60898-1)	-	500	-
8.4(Temperature-rise, IS 60898-1)	-	3680	-
8.5(Uninterrupted duty, IS 60898-1)	-	500	-
8.6(Automatic operation, IS 60898-1)	-	500	-
8.7(Mechanical and electrical endurance, IS 60898-1)	-	12305	-
8.9(Resistance to mechanical shock and impact, IS 60898-1)	-	4370	-
8.1(Resistance to heat, IS 60898-1)	-	1725	-
8.11(Resistance to abnormal heat and to fire, IS 60898-1)	-	3220	-
8.12(Resistance to rusting, IS 60898-1)	-	1392	-
8.13(Power loss, IS 60898-1)	-	500	-
9.3(Test of indelibility of marking, IS 60898-1)	-	500	-
9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-	500	-
9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	500	-
9.6(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.1(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.2(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.3(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.5.4(Test of protection against electric shock, IS 60898-1)	-	500	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8.5(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.9(28- day test, IS 60898-1)	-	81650	-
9.7.1(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.2(Test of protection against electric shock, IS 60898-1)	-	500	-
9.7.3(Test of protection against electric shock, IS 60898-1)	-	500	-
9.10.2(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.10.3(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.10.4(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.10.5(Test of tripping characteristic, IS 60898-1)	-	13800	-
9.11(Verification of mechanical and electrical endurance, IS 60898-1)	-	12305	-
9.13.1(Mechanical Stress, IS 60898-1)	-	4370	-
9.13.2.2(Mechanical Stress, IS 60898-1)	-	4370	-
9.13.2.4(Mechanical Stress, IS 60898-1)	-	4370	-
9.13.2.5(Mechanical Stress, IS 60898-1)	-	4370	-
9.14.1(Test of resistance to heat, IS 60898-1)	-	1725	-
9.14.2(Test of resistance to heat, IS 60898-1)	-	1725	-
9.14.3(Test of resistance to heat, IS 60898-1)	-	1725	-
9.15(Resistance to abnormal heat and to fire)	-	3220	-
9.16(Test of resistance to rusting)	-	1392	-
8.1.6(Non-interchangeability)	-	500	-
9.13(Resistance to mechanical shock and impact)	-	4370	-
2(Tripping tests)	-	3163	-
3(Verification of clearances between open contacts)	-	1265	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
6(Marking and other product information, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.3(Clearances and creepage distances, IS 60898-1)	-	650	-
8.4(Temperature-rise, IS 60898-1)	-	3680	-
9.6(Test of protection against electric shock, IS 60898-1)	-	500	-
9.6(Test of protection against electric shock, IS 60898-1)	-	500	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	3680	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-
9.12(Short- Circuit tests, IS 60898-1)	-	59800	-

Complete

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

73899 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	500	-
20.7(Construction)	-	27880	Above test charges included charges of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING: 2000, and charges of Vibration test : 25880. Total Test charges: (2000+25880)=27880.
20.8(Creepage Distance and Clearances)	-	500	-
20.10(Terminals)	-	0	-
20.11(External & Internal Wiring)	-	0	-
20.12(Protection against electric shock)	-	500	-
20.13(Endurance Tests and Thermal Tests)	-	17600	Above test charges included charges of endurance test: 11600, charges of thermal normal test: 3000 & thermal abnormal test: 3000. Total test charges: (11600+3000+3000)= 17600.
20.14(Resistance to Dust & Moisture)	-	13349	Above test charge included charges of Resistance to dust [IP 54/IP65/IP66]: 7849, charges of RESISTANCE TO MOISTURE: 5500. Total test charges: (7849+5500)= 13349.
20.15(Insulation Resistance and Electric Strength)	-	1000	-
20.16(Resistance to Heat , fire and tracking)	-	12070	Above test charges included of charges RESISTANCE TO HEAT: 1500, charges of NEEDLE FLAME TEST: 3500, charges of GLOW WIRE TEST: 5000, charges of RESISTANCE TO TRACKING: 2070. Total test charges: (1500+3500+5000+2070)= 12070.
20.9(Provision for earthing)	-	500	-

Complete

-
-

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

30150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification )	-	0	-
6(Classification )	-	0	-
7.1(Marking : Rated Voltage )	-	450	Test charges is included in 7.1
7.1(Marking : Symbol for nature of supply )	-	0	Test charges is included in 7.1
7.1(Marking : Rated power input)	-	0	Test charges is included in 7.1
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	Test charges is included in 7.1
7.1(Marking: Model or type reference)	-	0	Test charges is included in 7.1
7.1(Marking: Symbol for Class II)	-	0	Test charges is included in 7.1
7.1(Marking: IP Number)	-	0	Test charges is included in 7.1
7.1(Marking : Country of manufacture)	-	0	Test charges is included in 7.1
7.1(Marking : Rated pressure)	-	0	Test charges is included in 7.1
7.1(Marking : Rated capacity)	-	0	Test charges is included in 7.1
7.1(Marking : Statement for a pressure-relief device)	-	0	Test charges is included in 7.1
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	Test charges is included in 7.1
7.1(Marking : Warning for Open- outlet )	-	0	Test charges is included in 7.1
7.6(Marking : Symbol used )	-	0	Test charges is included in 7.1
7.8(Marking : Terminals )	-	0	Test charges is included in 7.1
7.11(Marking : Indication of controls )	-	0	Test charges is included in 7.1
7.13(Marking : Official language of Instruction )	-	0	Test charges is included in 7.1
7.14(Marking : Legibility and durability)	-	0	Test charges is included in 7.1
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
7(Marking)	-	0	Test charges is included in 7.1
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	450	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	450	-
(Cl.11 of 302-2-21:2011)(Heating)	-	800	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Test charges is included in 11
(Cl.11 of 302-2-21:2011)(Heating)	-	0	Test charges is included in 11
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	0	Test charges is included in 11
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	Test charges is included in 11
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	Test charges is included in 11
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	450	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	Test charges is included in 13
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	5400	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	2550	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Test charges is included in 15
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	Test charges is included in 15
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	0	Test charges is included in 15
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	450	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	Test charges is included in 16
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	700	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Test charges is included in 19
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Test charges is included in 19
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	Test charges is included in 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	Test charges is included in 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	Test charges is included in 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	Test charges is included in 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	0	Test charges is included in 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	Test charges is included in 19
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	0	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	450	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	Test charges is included in 19
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	Test charges is included in 19
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1800	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	Test charges is included in 22

Complete

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found