BIS - LIMS (Laboratory Information Management System)

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 [email protected]

Scope List

Reset

137 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

121

IS 13730 : Part 29 (1996)

Specifications for particular types of winding wires: Part 29 polyester or polyesterimide overcoated with polyamide - Imide enamelled rectangular copper wire, class 200

- View breakup
Rs.8,31,950/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

122

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

Rating covered up to 45 A Switches.

11850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	100	-
6.1(Ratings)	-	0	-
6.2(Ratings)	-	0	-
7(Classification)	-	100	-
7.1(Classification)	-	0	-
7.1.1(Classification)	-	0	-
7.1.2(Classification)	-	0	-
7.1.3(Classification)	-	0	-
7.1.4(Classification)	-	0	-
7.1.5(Classification)	-	0	-
7.1.6(Classification)	-	0	-
7.1.7(Classification)	-	0	-
7.1.8(Classification)	-	0	-
7.2(Classification)	-	0	-
8(Marking)	-	100	-
8.1(Marking)	-	0	-
8.2(Marking)	-	0	-
8.3(Marking)	-	0	-
8.5(Marking)	-	0	-
8.6(Marking)	-	0	-
8.7(Marking)	-	0	-
8.8(Marking)	-	0	-
8.9(Marking)	-	0	-
8.1(Marking)	-	0	-
10(Protection against Electric Shock)	-	100	-
10.1(Protection against electric shock )	-	0	-
10.2(Protection against electric shock )	-	0	-
10.3(Protection against electric shock )	-	0	-
10.3.1(Protection against electric shock )	-	0	-
10.3.2(Protection against electric shock )	-	0	-
10.4(Protection against electric shock )	-	0	-
10.5(Protection against electric shock )	-	0	-
10.6(Protection against electric shock )	-	0	-
10.7(Protection against electric shock )	-	0	-
11.1(Provision for earthing)	-	100	-
11.2(Provision for earthing)	-	0	-
11.3(Provision for earthing)	-	0	-
11.4(Provision for earthing)	-	0	-
12(Terminals)	-	3175	For screw type terminals : Rs. 100/-, For 6 A screw less terminals: Rs. 1525/-, For 10 A screw less terminals: Rs. 2125/-, For 16 A screw less terminals: Rs. 3175/-,
12.1(Terminals)	-	0	-
12.2(Terminals)	-	0	-
12.2.1(Terminals)	-	0	-
12.2.2(Connection of conductor)	-	0	-
12.2.3(Mechanical strength of terminals)	-	0	-
12.2.4(Resistance to corrosion)	-	0	-
12.2.5(Undue damage to conductor)	-	0	-
12.2.6(Terminals)	-	0	-
12.2.7(Insertion of conductor)	-	0	-
12.2.8(Terminals)	-	0	-
12.2.9(Locking against accidental loosening)	-	0	-
12.2.10(Terminals)	-	0	-
12.2.11(Distance between screw and conductor)	-	0	-
12.2.12(Terminals)	-	0	-
12.3(Terminals)	-	0	-
12.3.1(Terminals)	-	0	-
12.3.2(Screwless terminals)	-	0	-
12.3.3(Connectin of conductor)	-	0	-
12.3.4(Material of terminals)	-	0	-
12.3.5(Clamping)	-	0	-
12.3.6(Terminals)	-	0	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	0	-
12.3.8(Terminals)	-	0	-
12.3.9(Terminals)	-	0	-
12.3.10(Terminals)	-	0	-
12.3.11.a(Terminals)	-	0	-
12.3.11.b(Terminals)	-	0	-
12.3.12(Terminals)	-	0	-
13(Constructional requirements )	-	100	-
13.1(Constructional requirements )	-	0	-
13.2(Constructional requirements )	-	0	-
13.3(Constructional requirements )	-	0	-
13.3.1(Constructional requirements )	-	0	-
13.3.2(Constructional requirements )	-	0	-
13.3.3(Constructional requirements )	-	0	-
13.4(Constructional requirements )	-	0	-
13.5(Constructional requirements )	-	0	-
13.6(Constructional requirements )	-	0	-
13.7(Constructional requirements )	-	0	-
13.8(Constructional requirements )	-	0	-
13.9(Constructional requirements )	-	0	-
13.1(Constructional requirements )	-	0	-
13.11(Constructional requirements )	-	0	-
13.12(Constructional requirements )	-	0	-
13.13(Constructional requirements )	-	0	-
13.14(Constructional requirements )	-	0	-
13.15(Constructional requirements )	-	0	-
13.15.1(Constructional requirements )	-	0	-
13.15.2(Constructional requirements )	-	0	-
14(Mechanism [Cl. 14])	-	100	-
14.1(Mechanism)	-	0	-
14.2(Mechanism)	-	0	-
14.3(Mechanism)	-	0	-
14.4(Mechanism)	-	0	-
14.5(Mechanism)	-	0	-
14.6(Mechanism)	-	0	-
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	1500	-
15.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	-
15.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	-
15.2.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	-
15.2.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	-
15.2.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	-
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	0	-
16(Insulation resistance and electric strength )	-	100	-
16.1(Insulation resistance [Cl. 16.1])	-	0	-
16.2( Electric Strength [Cl. 16.2])	-	0	-
16.3(Insulation resistance and electric strength )	-	0	-
17(Temperature- rise [Cl. 17])	-	500	-
18(Marking and breaking Capacity[Cl. 18])	-	500	-
18.1(Making and breaking capacity )	-	0	-
18.2(Making and breaking capacity )	-	0	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	0	-
19.1(Normal operation)	-	4600	For 6 A switch : Rs. 1375/-, For 10 A switch : Rs. 1600/-, For 16 A switch : Rs. 2550/-, For 20 A switch : Rs. 2650/-, For 25 A switch : Rs. 3625/-, For 32 A switch : Rs. 4150/-, For 45 A switch : Rs. 4600/-
19.2(Normal operation)	-	1000	For 6 A& 10 A switch : Rs. 750/-, For 16 A switch : Rs. 1000/-
20(Mechanical Strength Test [Cl. 20])	-	100	-
20.1(Mechanical strength )	-	0	-
20.2(Mechanical strength )	-	0	-
20.3(Mechanical strength )	-	0	-
20.4(Mechanical strength )	-	0	-
20.4.1(Mechanical strength )	-	0	-
20.4.2(Mechanical strength )	-	0	-
20.5 & 24.4.1(Mechanical strength )	-	0	-
20.5 & 24.4.2(Mechanical strength )	-	0	-
20.6 & 24.4.1(Mechanical strength )	-	0	-
20.6 & 24.4.2(Mechanical strength )	-	0	-
20.7(Mechanical strength )	-	0	-
20.8(Mechanical strength )	-	0	-
20.9(Mechanical strength )	-	0	-
21(Resistance to Heat [Cl.21])	-	100	-
21.1(Resistance to heat )	-	0	-
21.2(Resistance to heat )	-	0	-
21.3(Resistance to heat )	-	0	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	100	-
22.1(Screws, current carrying parts and connections )	-	0	-
22.2(Screws, current carrying parts and connections )	-	0	-
22.3(Screws, current carrying parts and connections )	-	0	-
22.4(Screws, current carrying parts and connections )	-	0	-
22.5(Screws, current carrying parts and connections )	-	0	-
22.6(Screws, current carrying parts and connections )	-	0	-
22.7(Screws, current carrying parts and connections )	-	0	-
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	100	-
23.1(Creepage distances, clearances & distance through sealing compound )	-	0	-
23.2(Creepage distances, clearances & distance through sealing compound )	-	0	-
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	700	-
24.1(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	0	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	0	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	500	-
25 of IS 3854 : 1997(Resistance to rusting)	-	125	-

Complete

-
-

123

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

Up to 100 µF

478760 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.9(Capacitance measurement)	-	3000	-
2.1(Check of dimensions)	-	720	-
2.14(Damping heat test)	-	12000	-
2.16.3(Destruction test : Test procedure)	-	30000	-
2.13(Endurance test)	-	380000	30,000/- for Class D, 80,000/- for Class C, 1,30,000/- for Class B, 3,80,000/- for Class A
2.5(Tangent of loss angle)	-	3000	-
2.12(Sealing Test)	-	1800	-
2.15(Self-healing test (if applicable))	-	3000	-
2.6(Visual Examination)	-	720	-
5.1(Check marking)	-	720	-
2.7(Voltage test between terminals)	-	1200	-
2.8(Voltage test between terminals and case)	-	1200	-
2.11.1.1(Tensile)	-	1960	-
2.11.1.2(Bending (half cf the terminations))	-	1960	-
2.11 .1.3(Torsion (other half of the terminations))	-	1960	-
2.11.1.4(Torque (screw terminals))	-	1960	-
2.11.3(Vibration)	-	25880	-
2.11.2(Soldering)	-	2150	-

Complete

-
-

124

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

125

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

Surface and semi-recessed type

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	275	-
10.1(Dimentions)	-	275	-
10.2(Dimentions)	-	0	-
10.2(Dimentions)	-	0	-
11.1(Accessibility of live parts )	-	275	-
11.2(Accessibility of live parts )	-	0	-
11.3(Accessibility of live parts )	-	0	-
11.4(Accessibility of live parts )	-	0	-
11.4.1(Accessibility of live parts )	-	0	-
12.1(Provision for Earthing)	-	275	-
12.2(Provision for Earthing)	-	0	-
13.1(Terminals)	-	500	TERMINALS - SCREW TYPE : Rs. 275 /- TERMINALS - SCREW LESS: Rs. 500/-
13.2(Terminals)	-	0	-
13.3(Terminals)	-	0	-
13.4(Terminals)	-	0	-
13.5(Terminals)	-	0	-
13.6(Terminals)	-	0	-
13.7(Terminals)	-	0	-
13.8.1(Terminals)	-	0	-
13.8.2(Terminals)	-	0	-
13.8.3(Terminals)	-	0	-
14.1(Construction)	-	275	-
14.2(Construction)	-	0	-
14.3(Construction)	-	0	-
14.4(Construction)	-	0	-
15.1(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1550	-
15.2(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
15.3(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
15.4(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
15.5(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
15.6(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
15.7(RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
16(Temperature Rise Test)	-	600	-
17(Temperature Rise Test)	-	275	-
18(Resistance to heat)	-	275	-
19(Resistance to abnormal heat fire and tracking)	-	1650	-
19.2(Resistance to abnormal heat fire and tracking)	-	0	-
19.3(Resistance to abnormal heat fire and tracking)	-	500	-
20.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	275	-
20.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
20.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	-
21.1(CREEPAGE DISTANCE AND CLEARANCES)	-	275	-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	450	-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	0	-
22.1(Resistance to Excessive residual Stress and to Rusting )	-	0	-

Complete

-
-

126

IS 13730 : Part 45 (1999)

Specifications for particular types of winding wires: Part 45 polyester enamelled round copper wire, class 130

- View breakup
Rs.8,34,250/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

127

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

Class 1 and 2

160615 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.7.6.2(Impulse voltage test)	-	7500	-
12.7.6.3(ac Voltage test)	-	575	-
12.7.6.4(Insulation resistance test)	-	575	-
11.1(Limits of Error and Interpretation or Test Results)	-	1265	-
12.15(Test of Meter Constant/Registration)	-	575	-
12.14(Test of Starting Conditions)	-	575	-
12.13(Test of No-Load Condition)	-	575	-
12.12(Test ofAmbient Temperature Influence)	-	805	-
12.17(Repeatability of Error Test )	-	3450	-
12.11(Test of Iniluence Quantities)	-	8855	-
12.7.1(Test of Power Consumption)	-	575	-
12.7.2(Test of Influence of Supply Voltage)	-	1725	-
12.7.3( Test of Influence of Short-time Overcurrents)	-	2875	-
12.7.4(Test of Influence of Self-Heating)	-	1150	-
12.7.5(Test of Influence of Heating)	-	575	-
12.8(TestorImmunity to Earth Fault)	-	805	-
12.6.1(Dry Heat Test)	-	1725	-
12.6.2(Cold Test)	-	10235	-
12.6.3( Damp Heat Cycle Test)	-	10810	-
12.3.1(Shock Test)	-	9660	-
12.3.3( Spring Hammer Test)	-	575	-
12.4(Testof Resistance to Heat and Fire )	-	5750	-
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	6475	-
12.9.3(Test for Immunity to EIectromagnetic HF Fields)	-	34650	-
12.9.4(FastTransient BurstTest)	-	8325	-
12.9.5(Radio Interference Measurement)	-	11550	-
6.1(General)	-	690	-
6.2(Meter case)	-	0	-
6.3(Window)	-	0	-
6.5(Terminal Cover(s))	-	0	-
6.6(Clearance and creepage dis¬t¬ances)	-	0	-
6.7(Insulating encased meter)	-	0	-
6.10(Display of measured values)	-	0	-
6.11(Output device)	-	0	-
7.1 a)(MARKING OF METERS : Name Plate )	-	0	-
7.1 b)(MARKING OF METERS : Name Plate )	-	0	-
7.1 c)(MARKING OF METERS : Name Plate )	-	0	-
7.1 d)(MARKING OF METERS : Name Plate )	-	0	-
7.1 e)(MARKING OF METERS : Name Plate )	-	0	-
7.1 f)(MARKING OF METERS : Name Plate )	-	0	-
7.1 g)(MARKING OF METERS : Name Plate )	-	0	-
7.1 h)(MARKING OF METERS : Name Plate )	-	0	-
7.1 j)(MARKING OF METERS : Name Plate )	-	0	-
7.1 k)(MARKING OF METERS : Name Plate )	-	0	-
7.1 m)(MARKING OF METERS : Name Plate )	-	0	-
7.1 p)(MARKING OF METERS : Name Plate )	-	0	-
7.1 n)(MARKING OF METERS : Name Plate )	-	0	-
7.1.1(BIS Standard Mark)	-	0	-
7.2(Connection diagrams and terminal marking)	-	0	-
6.4(Terminals, terminal block and protective earth terminal)	-	2300	Heat Deflection Test
12.3.2(Vibration Test)	-	14950	Charges including Pre & Post Performance
12.5 a)(Test of Protection Against Penetration of Dust and Water)	-	10465	-
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	0	-

Complete

-
-

128

IS 8309 (1993)

Compression type tubular terminal ends for aluminium conductors of insulated cables - Specification (First Revision)

3740 View breakup
Rs.3740/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Finish, IS 8309)	-	170	Complete test charges - 3740/-
5(Dimensions, IS 8309)	-	300	Complete test charges - 3740/-
8.2(Flattening Test, IS 8309)	-	630	Complete test charges - 3740/-
8.3(Electrical Conductivity Test, IS 8309)	-	340	Complete test charges - 3740/-

Complete

-
0.0

129

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

178960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	360	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	520	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Mass of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.9.2 (chem)(Uniformity of Zinc coating)	-	340	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.10 (elec)(Surface condition test)	-	14490	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.11 (elec)(Corona Test)	-	19200	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.12 (elec)(Radio Interference Voltage Test)	-	42000	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
10.4 (mech)(Direction of lay)	-	125	159880/- 560 to 690 sq. mm. 178960/- 520 sq. mm.
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	----
13.9 (elec)(The test of galvanising)	-	1210	170/- per wire 1210/- for 7 wires
8.2.1 (elec)(Size of complete conductor)	-	125	--
8.2.2 (elec)(Resistance of complete conductor)	-	5200	--

Complete

-
-

130

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

73250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.1 Table-1(Dimensional measurement of wires)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor )	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.3(Direction of Lay)	-	125	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
9.2 Table 3(Lay Ratio of stranded conductors)	-	250	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.2 Table 1(Breaking Load Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- Before Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.3 Table 1(Elongation Test- After Stranding)	-	360	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.
12.4 Table 1(Resistance of Aluminium wire)	-	520	Complete conductor test charges : 6585/- 15 sq. mm. 11105/- 22, 34, 55, 80 & 100 sq. mm. 25040/- 125, 148, 173, 200 & 232 sq. mm 45755/- 288, 346, 400 & 465 sq. mm. 73250/- 525, 570, 604, 642, 695 & 767 sq. mm.

Complete

-
-

131

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

166060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (elec)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
10 (mech)(Stranding)	-	125	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	360	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	460	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	520	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Mass of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.7.2 (chem)(Uniformity of Zinc coating)	-	340	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.9 (elec)(Surface condition test)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.10 (elec)(Ultimate breaking load)	-	14490	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.
13.11 (elec)(Stress-strain test)	-	48300	For complete test charges : 14605/- 10, 18, 30, 50 & 80 sq. mm 88990/- 100 sq. mm 127525/- 150 & 200 sq. mm 146980/- 400 & 560 sq. mm. 166060/- 420 & 520 sq. mm.

Complete

-
-

132

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

33780 View breakup
Rs. 14,325/- [25, 50 & 100 sq. mm] & Rs. 33,780/-[150, 240 & 300 sq. mm]; Restricted to Rs. 2,400/- for 7 strands, Rs. 5,625/- for 19 strands for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load before stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.3, Table-1(Breaking load after stranding)	-	360	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.5, Table 1(Resistance test)	-	520	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.6, Table 3(Measurement of lay ratio)	-	250	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
12.4(Wrapping test)	-	460	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
6(Freedom from defects)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm
9.3(Stranding)	-	125	Complete test charges by considering all tests 14325/- 25, 50 & 100 sq. mm 33780/- 150, 240 & 300 sq. mm

Complete

-
0.0

133

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

DISTRIBUTON TRANSFORMER

203805 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	800	Test charges for subsequent tap Rs. 400
14.1(MOUNTING ARRANGEMENT)	-	800	-
14.2(MOUNTING ARRANGEMENT)	-	800	-
14.3(MOUNTING ARRANGEMENT)	-	800	-
14.4(MOUNTING ARRANGEMENT)	-	800	-
21.2 a)(Measurement of winding resistance )	-	600	Test charges for subsequent tap Rs. 300
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	3750	Test charges for subsequent tap Rs. 2500
21.2 d)(Measurement of no-load loss and current)	-	2500	Test charges for subsequent tap Rs. 1250
21.2 e)(Measurement of insulation resistance)	-	500	Test charges for subsequent tap Rs. 500
21.3(b)(Temperature-rise test)	-	15000	-
21.2 f)(Induced over-voltage withstand test)	-	1000	Test charges for subsequent tap Rs. 1000
21.2 g)( Separate-source voltage withstand test)	-	1000	Test charges for subsequent tap Rs. 1000
21.3(c)(Short-circuit withstand test)	-	59800	Test charges may vary as per KVA rating. Given charges upto 250 KVA, 11 KV.
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	6000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	6000	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	6000	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	6000	-
21.5.2.3( Oil leakage test (routine test))	-	5000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	6000	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	6000	-
21.5.3.3(Oil leakage test (routine test))	-	5000	-
15.5(Total Dry Film Paint Thickness)	-	3000	-
21.4 e(BDV and moisture content of oil in the transformer)	-	3000	-
21.4 d(Paint adhesion tests)	-	3000	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	5000	-
21.4 c(No load current at 112.5 percent voltage.)	-	1600	Test charges for subsequent tap Rs. 800
11(Minimum clearance in Air)	-	1000	-
16(Conservator for Non-sealed type Transformers)	-	800	-
20(Fittings)	-	800	-
21.3(a )(Lightning impulse test)	-	33000	Charges given for above 250 KVA to 500 KVA. so test charges vary by rating of transformer
21.4 b(Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA))	-	78200	-
21.4 a)( Determination of sound levels)	-	2275	Additional tap - 2275
6.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	5000	-

Complete

-
-

134

IS 3024 (2015)

Grain oriented electrical steel sheet and strip (Third Revision)

All Grades as per IS

24115 View breakup
Rs. 14,115/- for CG, HP and Domain Refined (which withstand annealing) grades (Epstein Method) ; Rs. 20,040/- for Domain Refined grades which does not withstand annealing (SST Method)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 11.1(Thickness)	-	500		1. 14115/- for CG, HP & domain refined (which withstand annealing) grades (Epstein method) 2. 20040/- For domain refined grades which does not withstand annealing (SST method)

Complete

-
-

135

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

136

IS 15391 (2003)

Cold rolled non - Oriented electrical steel sheet and strip-semi-processed type - Specification

All Grades as per IS

3125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1(Thickness)	-	500		Nil

Complete

-
-

137

IS 648 (2006)

Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification (Fifth Revision)

All Grades as per IS

29045 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1(Thickness)	-	500		Nil

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found