BIS - LIMS (Laboratory Information Management System)

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 [email protected]

Scope List

Reset

137 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 9335 : Part 3 : Sec 3 (1984)

Specification for cellulosic papers for electrical purposes: Part 3 specifications for individual materials: Sec 3 crepe paper

All

- View breakup
Rs.10350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 9335 : Part 3 : Sec 4 (1984)

Specification for cellulosic papers for electrical purposes: Part 3 specifications for individual materials: Sec 4 electrolytic capacitor paper

All

- View breakup
Rs.9545/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 9335 : Part 3 : Sec 2 (1985)

Specification for cellulosic papers for electrical purposes: Part 3 specifications for individual materials: Sec 2 capacitor paper

All

- View breakup
Rs.10350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 11170 (1985)

Specification for 1 performance requirements for constant speed compression ignition (Diesel) engines for agricultural purposes (Up To 20 KW)

upto 110 kW

99558 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
3.1(a) Preparation for tests according to IS : 10000 (Part 5)-1980)	-	6394	-
3.1(b) Preliminary run according to IS : 10000 (Part 5)-1980)	-	12500	-
3.1(c) Initial performance test according to Section I of IS : 10000 (Part 8)-1980 )	-	8700	-
3.1(d) Endurance test according to Section 1 of IS : 10000 (Part 9)-1980 )	-	54800	-
3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;)	-	8600	-
3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 )	-	4700	-
3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.)	-	3364	-

Complete

-
-

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

- View breakup
Rs. 88,481/-; Restricted to Rs. 23,250/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 10805 (1986)

Specification for foot - Valves, reflux valves or non - Return valves and bore valves to be used in suction lines of agricultural pumping systems (First Revision)

Size: 4” (Internal thread check up to 3”)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 2 Table 1)(Dimensions)	-	500	-
(Cl. 2 Table 1)(Dimensions)	-	500	-
(Cl. 2 Table 1)(Dimensions)	-	500	-
(Cl. 5)(Coating)	-	0	-
(Cl.6)(Testing)	-	0	-
(Cl.6)(Testing)	-	3000	-
(Cl.6)(Testing)	-	3000	-

Complete

-
-

IS 11501 (1986)

Specification for engine monoset pumps for clear, cold, fresh water for agricultural purposes

Rated power: up to 20 kW, Size: 4”

65498 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Direction of rotation)	-	500	-
6.1(Direction of rotation)	-	500	-
9.1(Design Features)	-	0	-
9.1(Design Features)	-	0	-
10.2(Casing)	-	954	-
10.3(Impeller)	-	0	-
10.4(Shaft)	-	0	-
11.3.2.1(Pump Testing)	-	4882	-
11.3.2.3(Pump Testing)	-	4882	-
11.4.2.1(Pump Testing)	-	4882	-
11.4.2.1(Pump Testing)	-	4882	-
11.4.2.2(Pump Testing)	-	4882	-
11.4.2.5(Pump Testing)	-	4882	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-
14(MARKING)	-	500	-

Complete

-
-

IS 10322 : Part 5 : Sec 4 (1987)

Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires

89550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	-
6(Construction)	-	27880	Above test charges included charges of CONSTRUCTION, TERMINALS, EXTERNAL & INTERNAL WIRING: 2000, charges of vibration test: 25880. Total test charges: (2000+25880)=27880.
7(Creepage Distance And Clearances)	-	500	-
8(Provision for Earthing)	-	500	-
9(Terminals)	-	0	-
10(External & Internal Wiring)	-	0	-
11(Protection Against Electric Shock )	-	500	-
13.4(Endurance Test and Thermal test)	-	17600	Above test charges included charges of endurance test: 11600, charges of thermal normal test: 3000, charges of thermal abnormal test: 3000. Total test charges=(11600+3000+3000)= 17600.
13.5(Resistance To Dust & Moisture)	-	9000	Above test charges included charges of IP1X/2X/3X/4X: 1500, charges of IPX1/X2: 2000, charges of RESISTANCE TO MOISTURE: 5500. Total test charges=(1500+2000+5500)=9000
13.6(Insulation Resistance and Electric Strength)	-	1000	-
13.7(Resistance to Heat, Fire & Tracking)	-	12070	Above test charges included charges of RESISTANCE TO HEAT: 1500, charges of NEEDLE FLAME TEST: 3500, charges of GLOW WIRE TEST: 5000, charges of RESISTANCE TO TRACKING: 2070. Total test charges= (1500+3500+5000+2070)= 12070
13.8(Photometric Test)	-	20000	-

Complete

-
-

IS 1554 : Part 2 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision)

- View breakup
Rs. 2,28,450/- for 1 Core (Upto 11 kV) ; Rs. 2,75,100/- for 3 Core (Upto 11 kV) ; Multicore cables: additional charges Rs. 500/- per core per test; Restricted to Rs. 44,775/- for single core Excluding Partial discharge test, bending test followed by partial discharge test, Heating cycle test followed by partial discharge test, impulse withstand test. For multi core cables, extra charges @ 35 % for each additional core shall be levied Material testing charges as per relevant referred ISs to be levied additionally for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

100

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
Rs. 1,22,200/- ; Multicore cables: additional charges Rs. 500/- per core per test; Restricted to Rs. 39,375/- (Testing charges for the product) [Single core] and Rs. 13,800/- ie. @35% for each additional core. (Excluding addl. Type test for cables with improved fire performance) Rs. 1,650/- (for the applicable optional test). Testing charges for Additional Type Tests for Improved Fire Performance Tests: Rs. 10,650/- for category C1 Rs. 17,550/- for category C2 R for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

101

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
Rs. 52,800/-; Multicore cables: additional charges Rs. 500/- per core per test; Restricted to Rs. 18,000/- for single core cable. For the multi cables, additional charges @ of 25% for each additional core shall be levied above the rated single core charges for the additional tests for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

102

IS 9857 (1990)

Welding cables - Specification (First Revision)

- View breakup
Rs. 28,300/-; Multicore cables: additional charges Rs. 500/- per core per test.; Restricted to Rs. 17,100/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

103

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

- View breakup
Rs. 30,165/-; Restricted to Rs. 18,450/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

104

IS 4770 (1991)

Rubber gloves - Electrical purposes - Specification (First Revision)

- View breakup
Rs.23600/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Scope restricted; Except for following tests : Cl. No. 6.1.1 k Nitrogen content (For natural rubber only) Cl. No. 6.1.1 m Ash Content (For natural Rubber only)

105

IS 1576 (1992)

Solid pressboard for electrical purposes - Specification (First Revision)

- View breakup
Rs.32200/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

106

IS 2705 : Part 2 (1992)

Current transformers: Part 2 Measuring current transformers

- View breakup
Up to 6.6kV: Rs. 5,250/-* ; For 6.6kV to 66kV : Rs. 5,900/-* ; For 66-132kV: Rs. 7,750/-* ; For 132kV: Rs. 7,750/-* ; For 220kV: Rs. 9,450/-* *NOTE: PER CORE, PER RATIO, PER TAP in case of higher winding

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

107

IS 2705 : Part 1 (1992)

Current transformers - Specification: Part 1 general requirements (Second Revision)

- View breakup
For up to 6.6kV : Rs. 80,560/-* ; For 6.6kV to 66kV: Rs. 86,425/-* ; For 66-132kV: Rs. 99,250/-* ; For 132kV : Rs. 1,12,675/-* ; For 220kV: Rs. 1,35,630/-* *NOTE: PER CORE, PER RATIO, PER TAP in case of higher winding charges will increase accordingly.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

108

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

- View breakup
Rs. 30,910/-; Restricted to Rs. 22,545/- for closed type,Rs. 20,745/- /-for others for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

109

IS 6595 : Part 2 (1993)

Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply) - Specification (Second Revision)

Voltage: upto 440V, Power upto 110 kW, Size: 5''

15985 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Direction of Rotation)	-	690	-
8.1(Design Limitations)	-	0	-
9.1(General Requirements)	-	2530	-
10.1(Pump test, tolerances, and verification of guarantee on Pump Performance)	-	9200	-
10.4(Hydrostatic Test)	-	2875	-

Complete

-
-

110

IS 7098 : Part 3 (1993)

Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV

- View breakup
Rs. 6,02,700/- for 1 core (upto 66 kV), Rs. 9,25,325/- for 1 core (from 66 kV upto and including 132 kV);Rs. 12,37,483/- for 1 core (from 132 kV upto and including 220 kV) ; Multicore cables: additional charges Rs. 500/- per core per test.; Restricted to Unarmoured XLPE Insulated & PVC sheathed cable: Rs. 50,055/- (Excluding Bending Test followed by Partial Discharge, Dielectric power factor, capacitance measurement, Load cycle test followed by P.D measurement, Impulse withstand test followed by H.V. test) Unarmoured XLPE Insulated PE sheathed cable: Rs. 46,500/- (Excluding Bending Test followed by Partial Discharge, Dielectric power factor, capacitance measurement, Load cycle test followed by P.D measurement, Impulse withstand test followed by H.V. test) Armoured XLPE Insulated PVC sheathed cable: Rs. 53,685/- (Excluding Bending Test followed by Partial Discharge, Dielectric power factor, capacitance measurement, Load cycle test followed by P.D measurement, Impulse withstand test followed by H.V. test) Armoured XLPE Insulated PE sheathed cable: Rs. 50,130/- (Excluding Bending Test followed by Partial Discharge, Dielectric power factor, capacitance measurement, Load cycle test followed by P.D measurement, Impulse withstand test followed by H.V. test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Termination will be in customer scope

111

IS 692 (1994)

Paper insulated lead sheathed cables for rated voltage up to and including 33 kV - Specification (Third Revision)

- View breakup
Type tests Rs. 31,350/- + Rs. 6000/- per core

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

112

IS 13730 : Part 9 (1994)

Specification for particular types of winding wires: Part 9 polyester enamelled round aluminium wire, class 138

- View breakup
Rs.8,31,950/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

113

IS 13730 : Part 15 (1994)

Particular types of winding wires: Part 15 polyesterimide enammelled round aluminium wire, class 180

- View breakup
Rs.8,31.950/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

114

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

- View breakup
Rs. 19,550/-; Restricted to Rs. 13,950/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

115

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

- View breakup
Rs. 19,550/-; Restricted to Rs. 13,050/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

116

IS 8783 : Part 4 : Sec 2 (1995)

Winding wires for submersible motors - specification: Part 4 specification for individual wires: Sec 2 crosslinked polyethylene insulated and polyamide jacketed wires (First Revision)

- View breakup
Rs.20750/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

117

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

- View breakup
Rs. 57,150/-; Multicore cables: additional charges Rs. 500/- per core per test.; Restricted to Rs.24,975/- XLPE, Rs. 22,725/- PE for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

118

IS 7538 (1996)

Three - Phase squirrel cage induction motors for centrifugal pumps for agricultural application - Specification (First Revision)

Up to 110 kW 2 & 4 pole, 90 kW 6 pole, 75 kW 8 pole

119071 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.1( MARKING)	-	1000	-
11(PROVISION FOR EARTHING)	-	1000	-
22.3.1 b)(Measurement of stator resistance)	-	1200	-
24.1(No-load running of motor and reading of ' voltage)	-	2000	-
24.1(No-load running of motor and reading of ' current )	-	2000	-
24.1(No-load running of motor and reading of ' power input )	-	2000	-
24.1(No-load running of motor and reading of ' speed )	-	2000	-
24.2(Reduced Voltage Running Up Test)	-	1500	-
24.4(Full Load Test : voltage)	-	10000	-
24.4(Full Load Test : Power input )	-	10000	-
24.4(Full Load Test : current )	-	10000	-
24.4(Full Load Test : speed)	-	10000	-
24.5(Test for efficiency at reduced load)	-	10000	-
13.1(OVERLOAD:Momentary Excess Torque)	-	4000	-
23.1(TEMPERATURE-RISE TEST : Test at Rated Voltage)	-	14000	-
23.2(TEMPERATURE-RISE TEST: Test at Reduced Voltage)	-	14000	-
24.3(Locked Rotor Test:The readings of the input current)	-	4500	-
24.3(Locked Rotor Test:The readings of the input power)	-	4500	-
24.3(Locked Rotor Test:The readings of the breakaway rotor torque)	-	4500	-
25(HIGH-VOLTAGE TEST)	-	800	-
26(INSULATION-RESISTANCE TEST)	-	800	-
15(LIMITS OF VIBRATION SEVERITY)	-	6000	-
9(DIMENSIONS- H : Nominal )	-	5000	-
9(DIMENSIONS- H : Deviation )	-	5000	-
9(DIMENSIONS- A)	-	5000	-
9(DIMENSIONS- B)	-	5000	-
9(DIMENSIONS- C)	-	5000	-
9(DIMENSIONS- K+ : Nominal )	-	5000	-
9(DIMENSIONS- K+ : Tolerance )	-	5000	-
9(DIMENSIONS- Bolt or Screw)	-	5000	-
9(DIMENSIONS- M)	-	5000	-
9(DIMENSIONS- N)	-	5000	-
9(DIMENSIONS- P)	-	5000	-
9(DIMENSIONS- S)	-	5000	-
9(DIMENSIONS- T)	-	5000	-
9(DIMENSIONS- LA)	-	5000	-
9(DIMENSIONS- Depth of tapped Hole)	-	5000	-
27(OVERSPEED TEST)	-	4000	-
19.1.1(TERMINAL MARKINGS)	-	1000	-
5(ENCLOSURES)	-	38271	-

Complete

-
-

119

IS 13730 : Part 16 (1996)

Specifications for particular types of winding wires: Part 16 polyester enamelled rectangular copper wire class 155

- View breakup
Rs.8,30,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

120

IS 13730 : Part 26 (1996)

Specifications for particular types of winding wires: Part 26 polyamide - Imide enamelled round copper wire, class 200

- View breakup
Rs.8,92,850/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Electrical Research and Development Association, gujurat

ERDA Road, GIDC, Makarpura, Vadodara, VADODARA, Vadodara, Gujarat, 390010

9987940924 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found