BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

151

IS 9532 (1980)

Specification for chakka and shrikhand

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 and 3.2.6 Table 2 ( Titratable acidity)	-
3.1.1 and 3.1.6 Table 1 ( Titratable acidity)	-
3.1.1 and 3.1.6 Table 1 (Total ash, Chakka )	-
3.1.1 and 3.1.6 Table 1 (Coliform count)	-
3.2.1 and 3.2.6 Table 2 (Coliform count)	-
3.1.1 and 3.1.6 Table 1 (Yeast and mould count)	-
3.2.1 and 3.2.6 Table 2 (Yeast and mould count)	-

Complete

-
-

152

IS 9360 (1980)

Specification for carbofuran granules, bncapsulated

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.3.2 (Acidity)	-
2.2.3 (Dust)	-
2.2.4 (Encapsulation)	-
2.2.6 (Moisture Content)	-
2.3.1 (Carbofuran Content, NV upto 9)	-
2.2.2 (Particle Size)	-

Complete

-
-

153

IS 14314 (1995)

Thtnner,general purpose,for synthetic paints and varnishes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1, Clause 4.2, Table 1 (Sr.No. viii) (Keeping Quality (Hydrocarbon content))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vii) (Keeping Quality (Residue on evaporation))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vi) (Keeping Quality (Flash point (Abel)))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. v) (Keeping Quality (Distillation range))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iv) (Keeping Quality (Relative density at 27 °C))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iii) (Keeping Quality (Spot test))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ii) (Keeping Quality (Odour))	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. i) (Keeping Quality (Colour))	-
Clause 4.2, Table 1 (Sr.No. viii) (Hydrocarbon content)	-
Clause 4.2, Table 1 (Sr.No. vii) (Residue on evaporation)	-
Clause 4.2, Table 1 (Sr.No. vi) (Flash point (Abel))	-
Clause 4.2, Table 1 (Sr.No. v) (Distillation range)	-
Clause 4.2, Table 1 (Sr.No. iv) (Relative density at 27 °C)	-
Clause 4.2, Table 1 (Sr.No. iii) (Spot test)	-
Clause 4.2, Table 1 (Sr.No. ii) (Odour)	-
Clause 4.2, Table 1 (Sr.No. i) (Colour)	-

Partial

-
-

154

IS 745 (2003)

Textiles – Handloom cotton bed sheets – Specification (third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

155

IS 1374 (2007)

Poultry feeds - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

156

IS 14597 (1998)

Synthetic tarpaulins(Heavy Duty Protective Covers) made from coated nylon or polyester fabrics specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 & Table 1 (Total mass per unit area)	-
Cl 5 & Table 1 (Breaking strength: Longitudinal Direction)	-

Partial

-
-

157

IS 6901 (2018)

Gas welding equipment - Pressure regulators and pressure regulators with flow - Metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPA) (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Materials)	-

Partial

-
-

158

IS 2558 (1994)

Ponceau 4R, food grade - Specification (Second Revision)

- View breakup
Rs. 8008/- excluding chlorides, dye intermediates and lead.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1 Clause-3.1 SI.no (i) Annex-A (Total dye content corrected for sample dried at 105 ± 1°C for 2 h )	-
Table-1 Clause-3.1 SI.no (iii) IS 1699:1994 CL-7 (Water-i nsoluble matter, percent by mass, Max)	-
Table-1 Clause-3.1 SI-no.(iv) IS-1699 CL-8 (Combined ether extracts percent by mass,Max)	-
Table-1 Clause-3.1 SI-no ( vii) IS-1699 CL 15 (Lead mg/kg )	-
Table-1 Clause-3.1 SI-no ( vii) IS-1699 CL 15 (Arsenic mg/kg)	-
Table-1 Clause-3.1 SI-no.(viii) IS-1699 CL 16 (Heavy Metals mg/kg)	-
Table-1 Clause-3.1 SI.no (ii) IS-1699 :1994 CL-6 (Loss on drying at 135 °C )	-
Table-1 Clause-3.1 SI.no (ii) IS-1699 :1994 CL-6 (Chlorides and sulphatcs expressed as sodium salt, percent by mass, Max)	-

Partial

-
-

159

IS 612 (1992)

Roasted chicory powder - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 Table 1 (Acid Insoluble ash)	-
3.5 Table 1 (Total Ash)	-
3.5 Table 1 (Moisture)	-
3.5 Table 1 (Water soluble Matter )	-
3.2 (Cup Test)	-
3.3 (Microscopic Appearance)	-
3.5 Table 1 (Acid Insoluble ash)	-

Complete

-
-

160

IS 5191 (1993)

Sodium alginate,food grade specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table 1 (Acid insoluble ash)	-
3.3 Table 1 (Matter insoluble in water)	-
3.3 Table 1 (Arsenic)	-
3.3 Table 1 (Lead)	-
3.3 Table 1 (Moisture)	-
3.3 Table 1 (Ash)	-
3.3 Table 1 (Heavy metals)	-
3.3 Table 1 (Purity)	-
3.2.1 (Identification Test, solubility)	-
3.3 Table 1 (E Coli)	-
3.3 Table 1 (Salmonella)	-
3.3 Table 1 (Acid insoluble ash)	-

Partial

-
-

161

IS 5158 (1987)

Specification for phthalic anhydride,technical - (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

162

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no ii) (Sodium hydroxide (as NaOH), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iv) (Sulphates (as SO4), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no vi) (Iron (as Fe))	-
Cl. 3.3 and 3.4(Table 1, S. no vii) (Copper)	-
Cl. 3.3 and 3.4(Table 1, S. no viii) (Manganese)	-
Cl. 3.3 and 3.4(Table 1, S. no ix) (Chlorates and per-chlorates)	-
Cl. 3.3 and 3.4(Table 1, S. no x) (Matter insoluble water, percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no xi) (Total mercury)	-
Cl. 3.3 and 3.4(Table 1, S. no xii) (Sodium hydroxide)	-

Partial

-
-

163

IS 695 (2020)

Acetic Acid — Specification ( Fourth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.2.2 (Description)	-
4.3 - Table 1 - Sl No - i (Solubility in water - Annex A 1)	-
4.3 - Table 1 - Sl No - ii (Relative density at 27/27 ℃ - Cl 6 of IS 82)	-
4.3 - Table 1 - Sl No - iii (Colour - IS 8768)	-
4.3 - Table 1 - Sl No - iv (Acetic acid content (CH3COOH) - Annex A2)	-
4.3 - Table 1 - Sl No - v (Crystallizing point - Annex A 3)	-
4.3 - Table 1 - Sl No - vi (Residue on evaporation - Annex A 4)	-
4.3 - Table 1 - Sl No - vii (Chloride (as Cl) - Annex A 5)	-
4.3 - Table 1 - Sl No - viii (Iron (as Fe) - Annex A 6)	-
4.3 - Table 1 - Sl No - ix (Sulphate (as SO4) - Annex A 7)	-
4.3 - Table 1 - Sl No - x (Heavy metals [(including iron) calculated as Pb] - Annex A 8)	-
4.3 - Table 1 - Sl No - xi (Formic acid (HCOOH)- Annex A 9)	-
4.3 - Table 1 - Sl No - xii (Acetaldehyde (CH3CHO) - Annex A 10)	-
4.3 - Table 1 - Sl No - xiii ( Oxidizable impurities - Annex A 11)	-

Partial

-
-

164

IS 4447 (1994)

Sodium benzoate, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.1 (Reaction with Ferric Chloride)	-
3.2.2.1 (Test for Sodium - Reaction with uranylzinc acetate)	-
3.2.2.2 (Test for Sodium - Flame test)	-
3.3 Table 1 (Acidity or alkalinity)	-
3.3 Table 1 (Readily carbonizable substancances)	-
3.3 Table 1 (Readily oxidizable substancances)	-
3.3 Table 1 (Chlorinated organic compounds)	-
3.3 Table 1 (Moisture)	-
3.3 Table 1 (Arsenic )	-
3.3 Table 1 (Heavy Metals)	-
3.3 Table 1 (Melting range of benzoic acid)	-
3.3 Table 1 (Purity,expressed as C7H602)	-

Partial

-
-

165

IS 3383 (1982)

Specification for wettable sulphur powder

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2 Table 1 (Sulphur content, NV upto 9)	-
2.2 Table 1 (Sulphur content, NV above 9 below 50)	-
2.2 Table 1 (Sulphur content, NV above 50)	-
2.2 Table 1 (Material passing through 45 micron IS Sieve, after accelerated storage)	-
2.2 Table 1 (Suspensibility, after accelerated storage)	-
2.2 Table 1 (Wettability)	-
2.2 Table 1 (Arsenic ( as As ))	-

Complete

-
-

166

IS 251 (1998)

Sodaash,technical - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (GRADES)	-
4.1 (Description)	-
4.2 (a) (Dense Grade)	-
4.2 (b) (Medium Grade)	-
4.2 (c) (Light Grade)	-
4.3 (Volatile Matter Content)	-
4.4 (Sieve Analysis of Dense Grade Soda Ash)	-
4.5, Table 1, S.No. (i) (Total alkalinity (as Naz CO?), percent by mass)	-
4.5, Table 1, S.No. (ii) (Matter insoluble in water, percent by mass)	-
4.5, Table 1, S.No. (iii) (Sulphate (Na2SO& percent by mass,)	-
4.5, Table 1, S.No. (iv) (Chloride (as NaCI), percent by mass,)	-
4.5, Table 1, S.No. (v) (Iron (as Fe203), percent by mass, M)	-

Complete

-
-

167

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl. 2.3, Table-1 (Copper Content)	-
Cl. 2.3, Table-1 (Suspensibility)	-
Cl. 2.3, Table-1 (pH of one percent aqueous dispersion)	-
2.1 (Description)	-
2.3 Table 1 (i) (Copper content, )	-
2.3 Table 1 (ii) (Suspensibility, )	-
2.3 Table 1 (iii) (pH )	-

Complete

-
-

168

IS 13213 (2018)

Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.4, Table-1, Sr.no. 1 (Consistancy)	-
Cl. 4.4, Table-1, Sr.no. 2 (Drying time, Max)	-
Table-1 (Surface dry)	-
Table-1 (hard dry)	-
Table-1 (hard dry, 70oC)	-
Cl. 4.4, Table-1, Sr.no. 3 (Finish)	-
Cl. 4.4, Table-1, Sr.no. 4 (Gloss 60o, )	-
Cl. 4.4, Table-1, Sr.no. 5 (Colour)	-
Cl. 4.4, Table-1, Sr.no. 6 (Dry film thickness per coat, Min)	-
Cl. 4.4, Table-1, Sr.no. 8 (Flexibility and adhesion)	-
Table-1 (Scratch hardness after 1500 g)	-
Cl. 4.4, Table-1, Sr.no. 9 (Flash point( for each component))	-
Cl. 4.4, Table-1, Sr.no. 10 (fineness of grind)	-
Cl. 4.4, Table-1, Sr.no. 12 (Mass )	-
Table-1 (Resistance to acid)	-
Cl. 4.4, Table-1, Sr.no. 13 (Resistance to alkali)	-
Table-1 (Resistance to oil)	-

Complete

-
-

169

IS 1221 (1991)

Fountain pen ink - Dye based - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (COLOUR)	-
5.1 (General)	-
5.2 (Intensity of Coiour)	-
5.3 (Stability)	-
5.4 (Corrosion)	-
5.5 (Penetration)	-
5.6 (Colour Uniformity and Intensity)	-
5.7 (Resistance to Light)	-
5.8 (Clogging)	-
5.9 ( Washability Test ( for Washable inks))	-
6.0 (KEEPING QUALITY)	-

Partial

-
-

170

IS 4605 (1981)

Specification for crepe bandage (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5/5.5 (REQUIREMENTS-Chemical Neutrality-according to ' hot method' given in 6.3 of IS : 1390-1961*.)	-

Partial

-
-

171

IS 177 (1989)

Cotton drills – Specification (fourth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

172

IS 13714 (1993)

Dunnage pallets - Warehousing - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (DIMENSIONS)	-
4.1 (DIMENSIONS)	-
4.1 (DIMENSIONS)	-
5.1.2 (Timber)	-
5.2 (Nails)	-
6.1 , Fig. 1 (CONSTRUCTION)	-
6.1.1 (CONSTRUCTION)	-
6.1.2 (CONSTRUCTION)	-
7 (WORKMANSHIP AND FINISH)	-

Complete

-
-

173

IS 868 (1990)

Sealing wax - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
5.2.1 (Mineral Loading)	-
5.3 (Colour)	-
5.4 (Odour and Fuming)	-
5.9, 5.4 (Keeping Quality (Odour and Fuming))	-
5.5 (Adhesion to surface)	-
5.9, 5.5 (Keeping Quality (Adhesion to surface))	-
5.6 (Capability of taking impressions)	-
5.9, 5.6 (Keeping Quality (Capability of taking impressions))	-
5.7 (Heat Resistance)	-
5.9, 5.7 (Keeping Quality (Heat Resistance))	-
5.8 (Resistance to heat Polymerization)	-
5.9, 5.8 (Keeping Quality (Resistance to heat Polymerization))	-

Complete

-
-

174

IS 12447 (1988)

Specification for zinc wire for sprayed zinc coatings

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5, 5.1, Table-1 (Lead)	-
Cl.5, 5.1, Table-1 (Cadmium)	-
Cl.5, 5.1, Table-1 (Iron)	-
Cl.5, 5.1, Table-1 (Tin)	-
Cl.5, 5.1, Table-1 (copper)	-
Cl.4, Cl.5, 5.1, 5.2 (Zinc)	-
Cl.4, Cl.5, 5.1, 5.2 (Aluminium)	-
Cl.4, Cl.5, 5.1, 5.2 (Total impurities)	-
9.3 (Mechnical Properties: Wrapping test)	-
9.2 (Mechnical Properties: Elongation)	-
9.1 (Mechnical Properties: Tensile strength)	-
8 (Freedom From Defects)	-
6 (Diameter & Tolerance)	-

Complete

-
-

175

IS 4572 (2014)

Fibre ropes – Polyamide 3- 4- 8- and 12-Strand ropes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1 Polyamide ropes ( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-
5.2 (Cl. 4.4.2) of ISO 9554: 2010 (Workmanship)	-
5.2 (Cl. 4.4.1) of ISO 9554: 2010 (Workmanship)	-
5.2 (Cl. 4.3) of ISO 9554: 2010 (Treatment )	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (Structure of rope)	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (No. of Yarns in rope )	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (Construction & Structure )	-
5.2 Cl. 4.1 (b) of ISO 9554: 2010 (Constituent Materials As per )	-
Cl.6 Tables 1, 2 and 3. (Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-

Complete

-
-

176

IS/ISO 3183 (2007)

Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems (Amalgamating IS1978:1982 and IS1979:1985)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.13 (Height of Weld bead)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.10 (Surface Conditions. Imperfections and defects)	-
Cl 9.9 (DWT Test (For PSL 2 Welded Pipe))	-
Cl 9.8 (CVN Impact Test (For PSL 2 Pipe))	-
Cl 9.7 (Guided Bend Test)	-
Cl 9.6 (Flattening Test - IS 2328)	-
Cl 9.5 (Bend Test - IS 2329)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.13 (Height of Weld bead)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.10 (Surface Conditions. Imperfections and defects)	-
Cl 9.9 (DWT Test (For PSL 2 Welded Pipe))	-
Cl 9.8 (CVN Impact Test (For PSL 2 Pipe))	-
Cl 9.7 (Guided Bend Test)	-
Cl 9.6 (Flattening Test - IS 2328)	-
Cl 9.5 (Bend Test - IS 2329)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-

Complete

-
-

177

IS 3549 (2017)

Rubber hoses and hose assemblies for water suction and discharge - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Classification)	-
Cl 5 (Couplings and end fittings)	-
Cl 6.1 (Lining)	-
Cl 6.2 (Reinforcement)	-
Cl 6.3 (Cover)	-
Cl 7.1 & Table 3 (Bore (inside diameter))	-
Cl 7.2 (Enlarged ends)	-
Cl 7.3 (Unit lengths)	-
Cl 7.4 & Table 4 (Lining)	-
Cl 7.5 (Cover)	-
Cl 8.1.2 & Table 1 (Tensile strength, min.)	-
Cl 8.1.2 & Table 1 (Tensile strength, min.)	-
Cl 8.1.2 & Table 1 (Elongation at break, min.)	-
Cl 8.1.2 & Table 1 (Elongation at break, min.)	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in tensile strength from original value (max.))	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in tensile strength from original value (max.))	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in elongation at break from original value (max.) )	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in elongation at break from original value (max.) )	-
Cl 8.2.1 & Table 2 (Hydrostatic-pressure requirements (proof pressure test))	-
Cl 8.2.1 & Table 4 (Variation in length at max. working pressure)	-
Cl 8.2.2 & Table 2 (When tested by the method specified in ISO 1402, hoses shall meet the requirements of Table 2.)	-
Cl 8.2.3 & Table 3 (Resistance to bending (minimum bend radius as a function of nominal size))	-
Cl 8.2.4 & Table 4 (Resistance to suction flattening)	-
Cl 8.2.5 & Table 4 (Low-temperature flexibility)	-

Partial

-
-

178

IS 7904 (1995)

High Carbon Steel Wire Rods

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Dimensions & tolerances)	-

Partial

-
-

179

IS 446 (2017)

Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Classification)	-
Cl 4 (Classification)	-
Cl 4 (Classification)	-
Cl 5 (Materials and construction)	-
Cl 6.1 & Table 1 (Internal diameters and tolerances)	-
Cl 6.2 (Concentricity)	-
Cl 6.3 (Tolerance on length)	-
Cl 6.4 (Minimum thickness of lining and cover-Type 1 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 1 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 2 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 2 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 3)	-
Cl 6.4 (Minimum thickness of lining and cover-Type 3)	-
Cl 7.1 & Table 2 (Minimum tensile strength)	-
Cl 7.1 & Table 2 (Minimum tensile strength)	-
Cl 7.1 & Table 2 (Minimum elongation at break)	-
Cl 7.1 & Table 2 (Minimum elongation at break)	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in tensile strength from original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in tensile strength from original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (class A))	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (class A))	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class B only) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class B only) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class C only) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class C only) )	-
Cl 7.2 & Table 3 (Proof pressure)	-
Cl 7.2 & Table 3 (Proof pressure)	-
Cl 7.2 & Table 3 (Proof pressure)	-
Cl 7.2 & Table 3 (Change in length at maximum working pressure)	-
Cl 7.2 & Table 3 (Change in diameter at maximum working pressure)	-
Cl 7.2 & Table 3 (Minimum burst pressure)	-
Cl 7.2 & Table 3 (Minimum burst pressure)	-
Cl 7.2 & Table 3 (Minimum burst pressure)	-
Cl 7.2 & Table 3 (Flexibility at 23 °C)	-
Cl 7.2 & Table 3 (Low-temperature flexibility)	-

Partial

-
-

180

IS 14929 (2001)

Textiles - High strength polyolefins copolymer ropes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (MANUFACTURE)	-
5.2.1 (Construction)	-
5.2.2 (Construction)	-
5.2.3 (Construction)	-
5.3 (Structure)	-
5.4 ( Rope)	-
6.1, Table 1 /Table 2. ( REQUIREMENTS:- Linear Density)	-
6.1, Table 1 /Table 2. ( Breaking Strength, Min)	-
6.2, Table 1 and Table 2 ( Mass of the Coil)	-
6.3 ( Length of Coil)	-

Complete

-
-

First
Prev
5
6
7
8
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found