BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

211

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries â€” Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 9.2, Table-4 (L175 Or A25, Carbon)	-
Clause 9.2, Table-4 (L175 Or A25, Sulphur)	-
Clause 9.2, Table-4 (L175 Or A25, Phosphorus)	-
Clause 9.2, Table-4 (L175 Or A25, Manganese)	-
Clause 9.2, Table-4 (L175P Or A25P, Carbon)	-
Clause 9.2, Table-5 (L830M or X120M, CE (PCM))	-
Clause 9.2, Table-5 (L830M or X120M, S)	-
Clause 9.2, Table-5 (L830M or X120M, P)	-
Clause 9.2, Table-5 (L830M or X120M, Mn)	-
Clause 9.2, Table-5 (L830M or X120M, Si)	-
Clause 9.2, Table-5 (L830M or X120M, C)	-
Clause 9.2, Table-5 (L690M or X100M, CE (PCM))	-
Clause 9.2, Table-5 (L690M or X100M, S)	-
Clause 9.2, Table-5 (L690M or X100M, P)	-
Clause 9.2, Table-5 (L690M or X100M, Mn)	-
Clause 9.2, Table-5 (L690M or X100M, Si)	-
Clause 9.2, Table-5 (L690M or X100M, C)	-
Clause 9.2, Table-5 (L625M or X90M, CE (PCM))	-
Clause 9.2, Table-5 (L625M or X90M, S)	-
Clause 9.2, Table-5 (L625M or X90M, P)	-
Clause 9.2, Table-5 (L625M or X90M, Mn)	-
Clause 9.2, Table-5 (L625M or X90M, Si)	-
Clause 9.2, Table-5 (L625M or X90M, C)	-
Clause 9.2, Table-5 (L555M or X80M, CE (PCM))	-
Clause 9.2, Table-5 (L555M or X80M, S)	-
Clause 9.2, Table-5 (L555M or X80M, P)	-
Clause 9.2, Table-5 (L555M or X80M, Mn)	-
Clause 9.2, Table-5 (L555M or X80M, Si)	-
Clause 9.2, Table-5 (L555M or X80M, C)	-
Clause 9.2, Table-5 (L485M or X70M, CE (PCM))	-
Clause 9.2, Table-5 (L485M or X70M, CE (IIW))	-
Clause 9.2, Table-5 (L485M or X70M, S)	-
Clause 9.2, Table-5 (L485M or X70M, P)	-
Clause 9.2, Table-5 (L485M or X70M, Mn)	-
Clause 9.2, Table-5 (L485M or X70M, Si)	-
Clause 9.2, Table-5 (L485M or X70M, C)	-
Clause 9.2, Table-5 (L450M or X65M, CE (PCM))	-
Clause 9.2, Table-5 (L450M or X65M, CE (IIW))	-
Clause 9.2, Table-5 (L450M or X65M, S)	-
Clause 9.2, Table-5 (L450M or X65M, P)	-
Clause 9.2, Table-5 (L450M or X65M, Mn)	-
Clause 9.2, Table-5 (L415M or X60M, Si)	-
Clause 9.2, Table-5 (L450M or X65M, C)	-
Clause 9.2, Table-5 (L415M or X60M, CE (PCM))	-
Clause 9.2, Table-5 (L415M or X60M, CE (IIW))	-
Clause 9.2, Table-5 (L415M or X60M, S)	-
Clause 9.2, Table-5 (L415M or X60M, P)	-
Clause 9.2, Table-5 (L415M or X60M, Mn)	-
Clause 9.2, Table-5 (L415M or X60M, Si)	-
Clause 9.2, Table-5 (L415M or X60M, C)	-
Clause 9.2, Table-5 (L390M or X56M, CE (PCM))	-
Clause 9.2, Table-5 (L390M or X56M, CE (IIW))	-
Clause 9.2, Table-5 (L390M or X56M, S)	-
Clause 9.2, Table-5 (L390M or X56M, P)	-
Clause 9.2, Table-5 (L390M or X56M, Mn)	-
Clause 9.2, Table-5 (L390M or X56M, Si)	-
Clause 9.2, Table-5 (L390M or X56M, C)	-
Clause 9.2, Table-4 (L210 Or A, Carbon)	-
Clause 9.2, Table-4 (L210 Or A, Sulphur)	-
Clause 9.2, Table-4 (L210 Or A, Phosphorus)	-
Clause 9.2, Table-4 (L210 Or A, Manganese)	-
Clause 9.2, Table-4 (L245 Or B, Carbon)	-
Clause 9.2, Table-4 (L245 Or B, Sulphur)	-
Clause 9.2, Table-4 (L245 Or B, Phosphorus)	-
Clause 9.2, Table-4 (L245 Or B, Manganese)	-
Clause 9.2, Table-4 (L290 Or X42, Carbon)	-
Clause 9.2, Table-4 (L290 Or X42, Sulphur)	-
Clause 9.2, Table-4 (L290 Or X42, Phosphorus)	-
Clause 9.2, Table-4 (L290 Or X42, Manganese)	-
Clause 9.2, Table-4 (L320 Or X46, Carbon)	-
Clause 9.2, Table-4 (L320 Or X46, Sulphur)	-
Clause 9.2, Table-4 (L320 Or X46, Phosphorus)	-
Clause 9.2, Table-4 (L320 Or X46, Manganese)	-
Clause 9.2, Table-4 (L360 Or X52, Carbon)	-
Clause 9.2, Table-4 (L360 Or X52, Sulphur)	-
Clause 9.2, Table-4 (L360 Or X52, Phosphorus)	-
Clause 9.2, Table-4 (L360 Or X52, Manganese)	-
Clause 9.2, Table-4 (L390 Or X56, Carbon)	-
Clause 9.2, Table-4 (L390 Or X56, Sulphur)	-
Clause 9.2, Table-4 (L390 Or X56, Phosphorus)	-
Clause 9.2, Table-4 (L390 Or X56, Manganese)	-
Clause 9.2, Table-4 (L415 Or X60, Carbon)	-
Clause 9.2, Table-4 (L415 Or X60, Sulphur)	-
Clause 9.2, Table-4 (L415 Or X60, Phosphorus)	-
Clause 9.2, Table-4 (L415 Or X60, Manganese)	-
Clause 9.2, Table-4 (L450 Or X65, Carbon)	-
Clause 9.2, Table-4 (L450 Or X65, Sulphur)	-
Clause 9.2, Table-4 (L450 Or X65, Phosphorus)	-
Clause 9.2, Table-4 (L450 Or X65, Manganese)	-
Clause 9.2, Table-4 (L485 Or X70, Carbon)	-
Clause 9.2, Table-4 (L485 Or X70, Sulphur)	-
Clause 9.2, Table-4 (L485 Or X70, Phosphorus)	-
Clause 9.2, Table-4 (L485 Or X70, Manganese)	-
Clause 9.2, Table-4 (L175 Or A25, Carbon)	-
Clause 9.2, Table-4 (L175 Or A25, Sulphur)	-
Clause 9.2, Table-4 (L175 Or A25, Phosphorus)	-
Clause 9.2, Table-4 (L175 Or A25, Manganese)	-
Clause 9.2, Table-4 (L175P Or A25P, Carbon)	-
Clause 9.2, Table-4 (L175P Or A25P, Sulphur)	-
Clause 9.2, Table-4 (L175P Or A25P, Phosphorus)	-
Clause 9.2, Table-4 (L210 Or A, Manganese)	-

Partial

-
-

212

IS 4432 (1988)

Specification for case hardening steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
TABLE-1 (Clause-5) ( CARBON)	-
TABLE-1 (Clause-5) (SILICON)	-
TABLE-1 (Clause-5) (MANGANESE)	-
TABLE-1 (Clause-5) (Nickel)	-
TABLE-1 (Clause-5) (Chromium)	-
TABLE-1 (Clause-5) (Molybdenum)	-
TABLE-1 (Clause-5) (SULPHUR)	-
TABLE-1 (Clause-5) (PHOSPHURS)	-
TABLE-1 (Clause-5) (TITANIUM)	-
TABLE-1 (Clause-5) (VANADIUM)	-
TABLE-1 (Clause-5) (NIOBIUM)	-
TABLE-1 (Clause-5) ( ALUMINIUM)	-
TABLE-1 (Clause-5) (NITROGEN)	-
4 (Freedom from Defects)	-
7 (Hardness)	-
11 (Dimensional Tolerances)	-

Partial

-
-

213

IS 15644 (2006)

Safety of electric toys

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Marking and instructions)	-
8.0 (Power Input)	-
9.0 (Heating and abnormal operation)	-
10.0 (Electrical strength at operating temperature)	-
11.1 (Moisture resistance)	-
11.2 (Resistant to humidity)	-
12.0 (Electric strength at room temperature)	-
13.0 (Mechanical strength)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
14.5 (Construction)	-
14.6 (Construction)	-
14.7 (Construction)	-
14.8 (Construction)	-
14.9 (Construction)	-
14.1 (Construction)	-
14.11 (Construction)	-
14.12 (Construction)	-
14.13 (Construction)	-
14.14 (Construction)	-
15.1 (Protection of cords and wires)	-
15.2 (Protection of cords and wires)	-
16.0 (Components)	-
17 Table-1 (Screws and connections)	-
17 Table-1 (Nominal daimeter of screws made of insulating material)	-
18.0 (Clearance and creepage distance)	-
18.0 (Clearance and creepage distance)	-
18.0 (Clearance and creepage distance)	-
19.1 (Ball pressure test IEC 60695-10-2)	-
19.2.1 (Glow wire test IEC 60695-2-11)	-
19.2.2 (Needle flame test)	-

Partial

-
-

214

IS 2074 (2015)

Ready mixed paint, air drying, red oxide - Zinc chrome, priming - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (a) (Composition, Pigment, Cl 5.1.1)	-
Cl 5.1 .1 (a) (Zinc chrome, (Type 2 of IS 51), Annex B)	-
Cl 5.1 .1 (b) (Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-
Cl 5.3 (Compatibility with Thinner, IS 1872)	-
Cl 5.4 (Freedom from Objectionable Impurities)	-
Cl 5.5 (Lead Restriction, IS 101(Part 8/Sec 5))	-
1 (i) (a) Table 1 (Consistency, Annex C)	-
1 (i) (b) Table 1 (Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-
1 (ii) Table 1 (Mass, IS 101 (Part1/sec7))	-
1 (iii) (a) Table 1 (Drying time, Surface Dry, IS 101 (Part3/sec1))	-
1 (iii) (b) Table 1 (Drying time, Hard Dry, IS 101 (Part3/sec1))	-
1 (iv) (a) Table 1 (Finish, IS 101 (Part3/sec4))	-
1 (iv) (b) Table 1 (Gloss, IS 101 (Part4/sec4))	-
1 (v) Table 1 (Fineness of grind, IS 101 (Part 3/Sec 5))	-
1 (vi) Table 1 (Colour, IS 101 (Part 4/Sec 2))	-
1 (vii) (a) Table 1 (Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-
1 (vii) (b) Table 1 (Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-
1 (viii) Table 1 (Flash point, IS 101 (Part l/Sec 6))	-
1 (x) (a) Table 1 (Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-
1 (xi) Table 1 (Accelerated storage stability test, Annex F)	-
1 (xii) Table 1, Cl.5.6 (Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-

Partial

-
-

215

IS 14625 (2015)

Plastics Feeding Bottles ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Physical Requirements)	-
Cl 5.1.3 (Wall Thickness)	-
Cl 5.1.4 (Capacity)	-
Cl 5.3.2 (Transparecy)	-
Cl 5.3.3 (Leakage Test)	-
Cl 5.3.4 (Drop Test)	-
Cl 5.3.5 (Ageing Resistance)	-
Cl 5.3.6 (Compressive Deformation Resistance)	-
Cl 5.3.7 (Product Resistance of Printed Containers)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Antimony)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Arsenic)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Antimony)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Arsenic)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Chromium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Cadmium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Lead)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Barium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Selenium)	-
Cl 5.1.4.2 (a) (Test for permanency of Pigment)	-
5.3.8 a) (Migration Test a) Distilled water at 40±2° hrs)	-
5.3.8 b) (Migration Test b) n-Haptane at 38±1° C for 30 min)	-

Partial

-
-

216

IS 44 (1991)

Iron oxide pigments for paints - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Composition Grade 1)	-
5.1.2 (Composition Grade 2)	-
5.1.3 (Composition Grade 3)	-
5.1.4 (Composition Grade 4)	-
5.1.5.1 (Composition Grade 5 & Grade 6 Type C)	-
5.1.5.2 (Composition Grade 5 & Grade 6 Type D)	-
5.1.6 (Composition Grade 7)	-
5.2 (Form & Condition)	-
5.3 Table-1 i. (Volatile matter - 7 of IS 33)	-
5.3 Table-1 ii. (Residue on sieve - 8 of IS 33)	-
5.3 Table-1 iii. (Oil absorption - 9 of IS 33)	-
5.3 Table-1 iv (a) (Colour staining power)	-
5.3 Table-1 iv (b) (Colour undertone)	-
5.3 Table-1 v. (Matter insoluble in water - 17 of IS 33)	-
5.3 Table-1 vi. (Sum of water soluble Chloride - Annex-A)	-
5.3 Table-1 vi. (Sum of water soluble Sulphate - Annex-A)	-
5.3 Table-1 vii. (Acidity or Alkalinity - 18 of IS 33)	-
5.3 Table-1 viii. (pH of aqueous extract)	-
5.3 Table-1 ix. (Total Iron - Annex-B)	-
5.3 Table-1 x. (Ferrous Iron - Annex-C)	-
5.3 Table-1 xi. (Carbonates - Annex-D)	-
5.3 Table-1 xii. (Calcium compounds - Annex-E)	-
5.3 Table-1 xiii. (Manganese Content - Annex-F)	-
5.3 Table-1 xiv. (Loss on ignition - Annex-G)	-
5.4 (Lead Free Material - 25 of IS 33)	-
5.3 Table-1 xiv. (Loss on ignition - Annex-G)	-

Complete

-
-

217

IS 1664 (2002)

Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl. 5) (Description )	-
(Cl. 6.1) (Seiving through 212 micron IS Sieve),)	-
table 1, (Cl. 6.3) (Moisture)	-
(Cl. 5) (Description )	-
table 1, (Cl. 6.3) (Presence of protenious/organic impurities)	-
table 1, (Cl. 6.3) (Total ash in moisture free sample)	-
table 1, (Cl. 6.3) (Arsenic(as As2O3),.)	-
table 1, (Cl. 6.3) (Lead(as Pb), .)	-
table 1, (Cl. 6.3) (Acid insoluble ash (on dry basis))	-
table 1, (Cl. 6.3) (Sulphur (on dry basis))	-
table 1, (Cl. 6.3) (Zinc (on dry basis))	-
table 1, (Cl. 6.3) (Cobalt (on dry basis))	-
table 1, (Cl. 6.3) (Mangnanese (on dry basis))	-
table 1, (Cl. 6.3) (Copper (on dry basis))	-
table 1, (Cl. 6.3) (Iodine (as KI ) on dry basis,)	-
table 1, (Cl. 6.3) (Iron (on dry basis))	-
table 1, (Cl. 6.3) (Magnesium( on dry basis))	-

Partial

-
-

218

IS 9973 (1981)

Specification for visor for scooter helmets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Impact resistance)	-
5.2 (Penetration resistance)	-
5.3 (Flammability)	-
5.4.2 (Spherical&Cylindral error)	-
5.5 (Field of Vision)	-
7.0 (Mass)	-
5.4.1 (Distortion)	-

Partial

-
-

219

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test)	-
4.2 - 5.24.3 ( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-
4.2 - 5.24.4 ( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-
4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test)	-
4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-
4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms)	-
4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components)	-
4.2 - 5.24.6.5 ( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-
4.2 - 5.24.7 ( Reasonably foreseeable abuse -Compression test)	-
4.2 - 5.24.8.2 ( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-
4.2 - 5.24.8.3 ( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-
4.3.2 - 5.21 ( Expanding materials)	-
4.4.1 - 5.2 (Small parts-For children under 36 months)	-
4.4.2 - 5.2 (Small parts-For children 36 months and over but under 72 months )	-
4.5.1.2 - 5.3 (Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-
4.5.1.3 - 5.3 (Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-
4.5.1.4 - 5.3 (Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-
4.5.2 - 5.4 (Shape, size and strength of certain toys-Small balls-Small balls test)	-
4.5.3 - 5.5 (Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-
4.5.4 - 5.6 (Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-
4.5.5 (Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-
4.5.6 (Shape, size and strength of certain toys-Balloons)	-
4.5.7 (Shape, size and strength of certain toys-Marbles)	-
4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-
4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-
4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-
4.5.8 - b (Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-
4.5.8 - c (Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-
4.5.8 - c (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-
4.5.8 - c (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-
4.5.8 - d (Shape, size and strength of certain toys-Hemispheric-shaped toys)	-
4.5.8 - d (Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-
4.5.8 - d (Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-
4.6.1 a - 5.8 (Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-
4.6.1 b (Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-
4.6.2 (Edges-Functional sharp edges)	-
4.6.3 - 5.8 (Edges-Edges on metal toys-Sharp edge test)	-
4.6.4 ( Edges-Edges on moulded toys)	-
4.6.5 ( Edges-Edges on exposed bolts or threaded rod)	-
4.7.1 - 5.9 (Points-Accessible sharp points-sharp-point test)	-
4.7.2 - a (Points-Functional sharp points)	-
4.7.2 - b (Points-Functional sharp points)	-
4.7.3 (Wooden toys)	-
4.8.1 (Projections-General requirments)	-
4.8.1 (Projections-General requirments)	-
4.8.1 (Projections-General requirments)	-
4.9(a) - 5.24.8.2 ( Metal wires and rods-wires and other metallic components intended to be bent)	-
4.9(b) - 5.24.8.3 ( Metal wires and rods-wires likely to be bent)	-
4.9 - c ( Metal wires and rods)	-
4.9 - c - 5.8 ( Metal wires and rods-Sharp edge test)	-
4.9 - c - 5.9 ( Metal wires and rods-Sharp Point test)	-
4.9 - c ( Metal wires and rods-Minimum dia of spokes)	-
4.9 - c ( Metal wires and rods-Spokes ends)	-
4.10(a) - 5.10 (Plastic film or plastic bags in packaging and in toys-average thickness)	-
4.10(a) - 5.10 (Plastic film or plastic bags in packaging and in toys- individual thickness)	-
4.11.2.1(a) - 5.11.2 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-
4.11.2.1(b) - 5.11.3 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-
4.11.2.1(b) - 5.11.2 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-
4.11.2.2 - 5.11.2 ( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-
4.11.3.1(a) - 5.11.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-
4.11.3.1(b) - 5.11.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-
4.11.3.1(b) - 5.11.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-
4.11.3.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-
4.11.4(a) - 5.11.4.1 (Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-
4.11.4(a) - 5.11.4.2 (Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-
4.11.4(b) - 5.11.3 (Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-
4.11.5 - 5.11.2 (Cords-Cords on pull toys-free length)	-
4.11.6 (Cords- Electrical cables)	-
4.11.7 - 5.11.1 (Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-
4.11.8 - 5.11.5 (Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-
4.11.9.1 (Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-
4.11.10 (Cords-Cords on toy bags)	-
4.11.11 - 5.11.6 ( Cords, strings and lines for flying toys- electrical resistance)	-
4.11.11 ( Cords, strings and lines for flying toys- )	-
4.12.1(a - 1) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(a - 2) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(a - 3) - 5.22.2 (Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-
4.12.1(a - 4) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(a - 5) - 5.22.2 (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(b - 1) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(b - 2) - 5.22.2 (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.1(b - 3) - 5.22.2 (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.2 (a) - 5.22.3 (Folding mechanisms-Other toys with folding mechanisms)	-
4.12.2 (b) (Folding mechanisms-Other toys with folding mechanisms)	-
4.12.3 (Folding mechanisms-Hinge line clearance)	-
4.13.1 (Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-
4.13.3 (Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-
4.13.3 - 5.7 (Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-
4.13.4 (Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-
4.13.5 (Holes, clearances and accessibility of mechanisms-Winding keys)	-
4.14(a) (Springs)	-
4.14(b) (Springs)	-
4.14(c) (Springs)	-
4.15.1.1 - 5.12.2 ( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-
4.15.1.2 - 5.12.3 ( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-
4.15.1.3 - 5.12.4 ( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-
4.15.2 - 5.12.5 ( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-
4.15.2 - 5.24.4 ( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-
4.15.3 - 5.12.6 ( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-
4.16.1 (Enclosures-Ventilation)	-
4.16.1 (Enclosures-Ventilation-No of openings)	-
4.16.1 (Enclosures-Ventilation-Area of Each openings(If two openings))	-
4.16.1 (Enclosures-Ventilation-Distance between openings(If two openings))	-
4.16.1 (Enclosures-Ventilation-Area of Each openings(If One opening))	-
4.16.1 (Enclosures-Ventilation-spacing(If One opening))	-
4.16.1 (Enclosures-Ventilation)	-
4.16.1 (Enclosures-Ventilation)	-
4.16.2.1 (Enclosures-Closures-Lids, doors and similar devices)	-
4.16.2.1 - 5.13.1 (Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-
4.16.2.2(a) (Enclosures-Closures-Lid support for toy chests and similar toys)	-
4.16.2.2(a) - 5.13.2.1 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-
4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-
4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-
4.16.2.2(b) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(d) (Enclosures-Closures-Lid support for toy chests and similar toys)	-
4.16.3 (Enclosures-Toys that enclose the head)	-
4.16.3 (Enclosures-Toys that enclose the head-No of openings)	-
4.16.3 (Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-
4.16.3 (Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-
4.16.3 (Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-
4.17 - 5.14 (Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-
4.17 (Simulated protective equipment, such as helmets, hats and goggles)	-
4.18.2(a) - 5.36 (Projectile toys-Projectiles-tip assessment of rigid projectiles)	-
4.18.2(b) (Projectile toys-Projectiles)	-
4.18.2(c) (Projectile toys-Projectiles)	-
4.18.2(c) (Projectile toys-Projectiles-Radius)	-
4.18.2(d) - 5.37 (Projectile toys-Projectiles-length of suction cup projectiles)	-
4.18.2(d) - 5.37 - 5.24.5 (Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-
4.18.2(d) - 5.37 - 5.24.6.5 (Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-
4.18.2 - e - 5.24.5 (Projectile toys-Projectiles-torque test)	-
4.18.2 - e - 5.24.6.5 (Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-
4.18.3(a) - 5.2 (Projectile toys-Projectile toys with stored energy-small parts test)	-
4.18.3(a) - 5.3 - 5.24 (Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-
4.18.3(a) - 5.4 (Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-
4.18.3(b) (Projectile toys-Projectile toys with stored energy)	-
4.18.3(b) (Projectile toys-Projectile toys with stored energy)	-
4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-
4.18.3(c ) - 5.24.5 (Projectile toys-Projectile toys with stored energy-torque test)	-
4.18.3(c ) - 5.24.6.4 (Projectile toys-Projectile toys with stored energy- tension test for protective components)	-
4.18.3(c ) (Projectile toys-Projectile toys with stored energy)	-
4.18.3(d) - 5.15.2 (Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-
4.18.3(e ) (Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-
4.18.4.1 - 5.20 (Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-
4.18.4.2(a) - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-
4.18.4.2(b) (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-
4.18.4.2(b) (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-
4.18.4.2(b) (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-
4.18.2(a) - 5.36 (Projectile toys-Projectiles-tip assessment of rigid projectiles)	-
4.18.2(b) (Projectile toys-Projectiles)	-
4.18.2(c) (Projectile toys-Projectiles)	-
4.18.2(c) (Projectile toys-Projectiles-Radius)	-
4.18.2(d) - 5.37 (Projectile toys-Projectiles-length of suction cup projectiles)	-
4.18.2(d) - 5.37 - 5.24.5 (Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-
4.18.2(d) - 5.37 - 5.24.6.5 (Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-
4.18.2 - e - 5.24.5 (Projectile toys-Projectiles-torque test)	-
4.18.2 - e - 5.24.6.5 (Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-
4.18.3(a) - 5.2 (Projectile toys-Projectile toys with stored energy-small parts test)	-
4.18.3(a) - 5.3 - 5.24 (Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-
4.18.3(a) - 5.4 (Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-
4.18.3(b) (Projectile toys-Projectile toys with stored energy)	-
4.18.3(b) (Projectile toys-Projectile toys with stored energy)	-
4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-
4.18.3(c ) - 5.24.5 (Projectile toys-Projectile toys with stored energy-torque test)	-
4.18.3(c ) - 5.24.6.4 (Projectile toys-Projectile toys with stored energy- tension test for protective components)	-
4.18.3(c ) (Projectile toys-Projectile toys with stored energy)	-
4.18.3(d) - 5.15.2 (Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-
4.18.3(e ) (Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-
4.18.4.1 - 5.20 (Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-
4.18.4.2(a) - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-
4.18.4.2(b) (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-
4.18.4.2(b) (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-
4.18.4.2(b) (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-
4.18.4.2(c ) - 5.24.5 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-
4.18.4.2(c ) - 5.24.6.4 (Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-
4.18.4.3 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-
4.18.4.3 - 5.15.2 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-
4.18.4.3(a) (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-
4.18.4.3(b) (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-
4.18.4.3(c) (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-
4.19 (Rotors and propellers)	-
4.21(a) (Braking)	-
4.21(a) (Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-
4.21(a) (braking)	-
4.21(b) (braking)	-
4.22.1 (Toy bicycles-Instructions for use)	-
4.22.2 (Toy bicycles-Determination of maximum saddle height)	-
4.22.3 - 5.16.1 (Toy bicycles-Braking requirements-determination of free-wheeling facility)	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-
4.22.3 - 5.16.3 (Toy bicycles-Braking requirements- brake performance for toy bicycles)	-
4.23 - 5.17 (Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-
4.24(a) - 5.18 (Toys containing a heat source-determination of temperature increases)	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-
4.24(b) - 5.18 (Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-
4.24(c) - 5.18 (Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-
4.24(c) - 5.18 (Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-
4.25 - 5.19 (Liquid-filled toys-leakage of liquid-filled toys)	-
4.25 (Liquid-filled toys)	-
4.26(a) - 5.2 ( Mouth-actuated toys-small parts test)	-
4.26(b) - 5.24.5 - 5.3 ( Mouth-actuated toys-small parts test after torque test)	-
4.26(b) - 5.24.6.1 - 5.4 ( Mouth-actuated toys-small parts test after tension test, general procedure)	-
4.26(c ) - 5.20 - 5.2 ( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-
4.27 (Toy roller skates, toy inline skates and toy skateboards)	-
4.28 ( Percussion caps specifically designed for use in toys)	-
4.28 ( Percussion caps specifically designed for use in toys)	-
4.30.2 (Toy scooters-Warnings and instructions for use)	-
4.30.4 - 5.12.2 (Toy scooters-Stability-sideways stability test, feet available for stabilization)	-
4.30.5(a) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(a) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(b) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(c) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(d) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(e) ( Toy scooters-Adjustable and folding steering tubes and handlebars)	-
4.30.5(f) - 5.30 ( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-
4.30.3 - 5.29 (Toy scooters-Strength-strength of toy scooter steering tubes)	-
4.30.3 - 5.29 (Toy scooters-Strength-strength of toy scooter steering tubes)	-
4.30.3 - 5.29 (Toy scooters-Strength-strength of toy scooter steering tubes)	-
4.30.7 ( Toy scooters-Wheel size(diameter))	-
4.30.8 (Toy scooters-Projections)	-
4.30.8 (Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-
4.31.1 - 5.32 (Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-
4.31.1 - 5.2 (Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-
4.31.2(a) - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-
4.31.2(b) - 5.34 - 5.2 (Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32 (Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-
4.32 - 5.38.2 ( Yo-yo balls - length (lo) of the yo-yo ball tether)	-
4.32 - 5.38.1 ( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-
4.33 - 5.11.3 (Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-
4.34 (Sledges and toboggans with cords for pulling)	-
4.35.3 - 5.39 (Jaw entrapment in handles and steering wheels-jaw entrapment test)	-
9873 (Part - 3) 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9)	-
9873 (Part - 3) 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9)	-
4.18.3(b) (Projectile toys-Projectile toys with stored energy)	-

Partial

-
-

220

IS 4151 (2015)

Protective helmets for motorcycle riders - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shell)	-
4.5 (Metal Parts)	-
4.6 (Visor)	-
6.1 (General)	-
6.2 (Shell)	-
6.3 (Protactive Padding)	-
6.4 (Retention System)	-
6.7 (Peripheral Vision)	-
6.8 (Workmanship and Finish)	-
7.2 (Impact Absorption Test)	-
7.3 (Rigidity Test)	-
7.4 (Projections and Surface Friction Test)	-
7.5 (Dynamic Test of Retention System)	-
7.6 (Audibility Test)	-
7.7 (Retention Test of Helmet)	-
7.8 (Micro-Slip Test of the Chin Strap)	-
7.9 (Test for Resistance to Abrasion of the Chin Strap )	-
7.10.1 (Inadvertent Release by Pressure)	-
7.10.2 (Ease of Release)	-
7.10.3 (Durability of Quick Release Mechanism)	-

Partial

-
-

221

IS 10908 (1991)

Flexible rubber tubing for liquefied petroleum gas - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (The tubing made out of this material shall be green in colour )	-
Cl.4.2 (The walls shall be seamless and free from all visible such as lumps, blows-holes,cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas)	-
Cl4.3.1 (The tubing shall be supplied in 6.4 and 7.0 mm inisde diametre,The tolerance on nominal diamtere shall be as per table 1)	-
Cl4.3.2 (it shall comply with the thickness as givien in table 1 when measured according to 4.2.2 of IS 443;1975 The readings shall be taken from different sample sections.)	-
Cl.4.4,(Cl.4.4.1) (when tested in accordance with the method given in AnnexureA. It shall fit over the standard and oversize metal nozzle shown in Fig1,2 and 3)	-
Cl.4.4,(Cl.4.4.2) (it shall remain atatched to both nozzles throught the test period)	-
Cl.4.5 (When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the increase in the outside diametre of the tubing ,Also the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.)	-
Cl.4.6 (Shore Hardness: the hardnesss on the flatsurface of the cut/slit tubing shall be measured and the same shall be 60 ± 5˚A)	-
Cl.4.7 (Accelerated Ageing test, the flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100Deg Cfor 72 hours in accordance with the method prescribed in IS 3400 (Part 4) it shall not show a change of + 10 A of its orignal shore hardness )	-
Cl.4.8.1 (Flexible test , Annexure B The gas pressure shown on the manometre shall not drop by more than 1 Kpa)	-
Cl4.8.2 (The tubing shall be so flexible that it will make contact with a cylinder former of radius 68 mm for at least 110 deg of its circumference when the tubing is placed over the framer and a mass of 1.6 kg is attcahed to each end)	-
Cl.4.9 (Crushing test , )	-
Cl.4.10 (Resistance to lpg ,Annexure c Shall not be more than 15 % of the initial mass of the tubing and the amount of exctractable matter shall not excced 10 percent of the iniital mass of te tubing)	-
Cl.4.12 (Burning behaviour on exposure to small flame,Annexure E tubing shall not burn to either of the outer marks within the test period of 45 seconds)	-

Partial

-
-

222

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2.1 (Lining)	-
Clause 4.2.2 (a) (Reinforcement)	-
Clause 4.2.2 (b) (Reinforcement)	-
Clause 4.2.3 (Cover)	-
Clause 4.3 Sub Clause 4.3.1 Table 1 (Bore Size)	-
Clause 4.3 Sub Clause 4.3.2 (a) (Thickness of Lining and Cover)	-
Clause 4.3 Sub Clause 4.3.2 (b) (Thickness of Lining and Cover)	-
Clause 4.3 Sub Clause 4.3.3 (Length)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a) (Tensile Strength- Lining)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b) (Tensile Strength- cover)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a) (Elongation at break- Lining)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b) (Elongation at break- Cover)	-
Clause 4.4 Sub Clause 4.4.2 (a) (Accelerated Ageing Test lining)	-
Clause 4.4 Sub Clause 4.4.2 (b) (Accelerated Ageing Test lining)	-
Clause 4.4 Sub Clause 4.4.2 (a) (Accelerated Ageing Test cover)	-
Clause 4.4 Sub Clause 4.4.2 (b) (Accelerated Ageing Test cover)	-
Clause 4.4 Sub Clause 4.4.3 (a) (Resistance of Lining to n-pentane)	-
Clause 4.4 Sub Clause 4.4.3 (b) (Resistance of Lining to n-pentane)	-
Clause 4.5 Sub clause 4.5.2 (Low Temperature Flexibility)	-
Clause 4.5 Sub clause 4.5.3 (Flexibility of Hose)	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1 (Proof pressure test)	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2 (Bursting pressure)	-
Clause 4.5 Sub clause 4.5.6 (Grip Strength Test)	-
Clause 4.5 Sub clause 4.5.7 (Burning Behaviour)	-

Partial

-
-

223

IS 2835 (1987)

Specification for flat transparent sheet glass (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (CLASSIFICATION)	-
4.1.1 (Material)	-
4.2-Table 1 & Cl 5.1 (Thickness )	-
4.2-Table 1 (Length )	-
4.2-Table 1 (Width)	-
4.3-Table 2-i (Gaseous inclusion)	-
4.3-Table 2-ii (Opaque gaseous inclusion)	-
4.3-Table 2-iii (Knots, dirts and stones)	-
4.3-Table 2-iv & Cl 5.2 (Scratches, rubs and crush)	-
4.3-Table 2-v & Cl 5.3 (Bow)	-
4.3-Table 2-vi & Cl 5.4 (Reams, Light Strings and lines)	-
4.1 (Material)	-
4.3-Table 2-vii (Waviness)	-
4.3-Table 2-viii (Sulphur stains)	-
4.3-Table 2-ix (Corner breakage and chip)	-
4.3.1-Table 2A-i (Allowable Cluster of Defects for AA Quality at Central area)	-
4.3.1-Table 2A-i (Allowable Cluster of Defects for AA Quality at Outer area)	-
4.3.1-Table 2A-ii (Allowable Cluster of Defects for A Quality at Central area)	-
4.3.1-Table 2A-ii (Allowable Cluster of Defects for A Quality at Outer area)	-
4.3.1-Table 2A-iii (Allowable Cluster of Defects for B Quality at Central area)	-
4.3.1-Table 2A-iii (Allowable Cluster of Defects for B Quality at Outer area)	-

Partial

-
-

224

IS 1417 (2016)

Gold and gold alloys, jewellery/ artefacts - Fineness and marking - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Fineness/ Gold Content in parts per thousand, percent)	-

Complete

-
-

225

IS 7079 (2008)

Automotive vehicles - Brake hose assemblies forhydraulicbraking systems used with non - Petroleum base brake fluid specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.9 (Tensile Test-Separation rate 25 ± 3 mm/min(This test need not be carried out if it has been carried out as part of test described in 5.10.))	-
5.9 (Tensile Test-Separation rate 50 ± 3 mm/min.(This test need not be carried out if it has been carried out as part of test described in 5.10.))	-
4.2.1 (Construction-Lining)	-
4.2.2 (Construction-Reinforcement and Reinforcement Plies)	-
4.2.3 (Construction-Cover)	-
5.3 (Visual Test)	-
5.6 (Pressure Test-Prior to dispatch each complete hose assembly shall be subjected to a pressure test using inert gas, air, water or brake fluid conforming to IS 8654 as the pressure medium. The test pressure shall be between 10.3 Mpa and 14.5 Mpa for inert gas and air, and between 20.7 Mpa and 24.8 Mpa for water and brake fluid.)	-
5.7, Table 4 (Bursting Strength Test-(Annex C).)	-

Partial

-
-

226

IS 11459 (1985)

Specification for Power - Operated chaff cutter

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

227

IS 5983 (1980)

Specification for eye - Protectors (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4/4.2 (DESIGN AND MANUFACTURE-Head-band)	-
3/3.1/3.1.1 (TYPES AND DESIGNATION-Types- Eye-Protector)	-
3/3.1/3.1.2 (TYPES AND DESIGNATION-Types- Oculars)	-
4/4.0 (DESIGN AND MANUFACTURE-General)	-
4/4.1 (DESIGN AND MANUFACTUREComfort to the Wearer)	-
4/4.3 (DESIGN AND MANUFACTURE-Fittings)	-
4/4.4 (DESIGN AND MANUFACTURE-Ventilation)	-
4/4.6 (DESIGN AND MANUFACTURE-Composition of Oculars (see 3.1.2))	-
5/5.1/5.1.1/5.1.1.1-Fig1 (REQUIREMENTS-General Requirements- Oculars-Dimensions)	-
5/5.1/5.1.1/5.1.1.4 (REQUIREMENTS-General Requirements- Oculars-Colour recognition)	-

Partial

-
-

228

IS 9167 (1979)

Specification for ear protectors

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (CONSTRUCTION AND WORKMANSHIP)	-
6.1.1 (Visual Examination )	-
6.1.3 (Rapid Change of Temperature Test )	-
6.1.3 (Rapid Change of Temperature Test )	-
6.1.5 (Low Temperature Impact Test )	-

Partial

-
-

229

IS 14951 (2001)

Fire extinguisher - 145 litres capacity mechanical foam type - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Capacity)	-
Cl 6 (Shape)	-
Cl 7.1 (General)	-
Cl 7.3 (Carrying Handle)	-
Cl 7.4 (Neck Ring)	-
Cl 7.5 (Cap)	-
Cl 7.6 (Snifter valve)	-
Cl 7.7 (Safety Pressure release valve)	-
Cl 7.8 (Liquid Level Indicator)	-
Cl 7.9 (Hose)	-
Cl 7.10 (Foam Making Branch & Other Discharge Fittings)	-
Cl 7.11 (Siphon Tube)	-
Cl 7.12 (Drain Plug)	-
Cl 7.13 (Wheeled Carriage)	-
Cl 8 (Charge)	-
Cl 10 (Painting)	-
Cl 11.1 (Discharge Test)	-

Partial

-
-

230

IS 8391 : Part 1 (2019)

Rubberized coir sheets for cushioning “ Specification Part 1 Curled (third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.7.2 (Indentation Hardness, Annex D)	-
7.7.3 (Resistance to Ageing, Annex E)	-
7.7.4 (Resistance to Flexing, Annex F)	-
7.7.5 (Compression Set (Aged), Annex G)	-
7.7.6 (Compression Set (Un-aged), Annex G)	-
B-1 ( DETERMINATION OF LENGTH AND WIDTH, Annex B)	-
B-2.1 (DETERMINATION OF THICKNESS, Annex B )	-
B-2.2 (Determination of Thickness of the Whole Sample, Annex B)	-
6.1 (Shape)	-
6.2 (Dimensions)	-
7.2 (Indentation Hardness)	-
7.3 (Resistance to Ageing)	-
7.4 (Resistance to Flexing)	-
7.5 (Compression Set(Aged))	-
7.6 (Compression Set(Unaged))	-

Partial

-
-

231

IS 3196 : Part 1 (2013)

Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Valve Protection)	-
10 (Foot Ring)	-
14 (Bung)	-
14 (Water Capacity)	-
15 (Hydrostatic Test)	-
16 (Pneumatic Leakage Test)	-
17 (Fatigue Test)	-
17 (Burst Test under Hydraulic Pressure)	-
18 (Parent Metal Longitudinal Tensile Strength)	-
18 (Parent Metal Circumferential Tensile Strength)	-
18 (Weld Metal Tensile Strength)	-
18 (Root Bend Test)	-
18 (Face Bend Test)	-
18 (Macro Examination)	-
18 (Minimum Thickness Test)	-
21 (Colour Identification)	-
23.2 (Protective Coatings)	-
23.2 (Protective coatings)	-

Complete

-
-

232

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl No 3.1 ( Description)	-
Cl No 3.2 (Miscibility with Water)	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768 (Colour)	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82 (Relative density, at 27/27 °C)	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82 (Residue on evaporation)	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ] (Acidity (as CH3COOH),)	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ] (Alkalinity)	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ] (Permanganate test)	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ] (Alcoholic impurities)	-

Partial

-
-

233

IS 12912 (1990)

Bromadiolone RB - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-

Complete

-
-

234

IS 7285 : Part 2 (2017)

Refillable seamless steel gas cylinders - Specification: Part 2 quenched and tempered steel cylinders with tensile strength less than 1 100 mpa (112 Kgf/mm²) (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.7 (Foot Rings)	-
6.8 (Neck Rings)	-
7.3 (Surface Defects)	-
10.1.3 a) i) ( Tensile strength (Rg) )	-
10.1.3 a) ii) ( Yield strength (Re))	-
10.1.3 a) & 10.2.1 a) (Elongation percent Min on gauge length = 5.65 √ So)	-
12.0 (COLOUR IDENTIFICATION)	-
10.4.1 Table 5 ,FIG. 9 (Bend Test)	-
10.3.1 &10.3.2Table 4 (Impact Test- )	-
Cl.5.1 , 5.2 , 5.3 (Titanium)	-
Cl.5.1 , 5.2 , 5.3 (Zinc)	-
Cl.5.1 , 5.2 , 5.3 (Magnesium)	-
Cl.5.1 , 5.2 , 5.3 (Copper)	-
Cl.5.1 , 5.2 , 5.3 (Aluminium)	-
Cl.5.1 , 5.2 , 5.3 (Molybdenum)	-
Cl.5.1 , 5.2 , 5.3 (Chromium)	-
Cl.5.1 , 5.2 , 5.3 (Nickel)	-
Cl.5.1 , 5.2 , 5.3 (Phosphorus)	-
Cl.5.1 , 5.2 , 5.3 (Sulphur)	-
Cl.5.1 , 5.2 , 5.3 (Manganese)	-
Cl.5.1 , 5.2 , 5.3 (Silicon)	-
Cl.5.1 , 5.2 , 5.3 (Carbon )	-

Partial

-
-

235

IS 15757 (2007)

Follow-up formula - Complementary foods - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.8.1 (Bacterial Count )	-
5.8.2 (Coliform Count )	-
5.8.3 (Escherichia Coli )	-
5.8.4 (Staphylococcus Aureus )	-
5.8.6 (Yeast and Mould Count )	-
5.8.5 (Salmonella and Shigella )	-
Cl 5.7 (Flavour and Odour)	-
Cl 5.1, 5.2 (Follow-up formula)	-
Table 1 (i) (Moisture)	-
Table 1 (ii) (Total milk protein)	-
Table 1 (iii) (Total fat)	-
Table 1 (iv) (Total ash (Annex B of IS 14433))	-
Table 1 (v) (Acid insoluble ash (Annex B of IS 14433))	-
Table 1 (vi) (Solubility: Solubility index (IS 12759) )	-
Table 1 (viii) (Iron (AnnexD of IS 14433 ))	-
Table 1 (xxii) (Sodium (IS 12760))	-
Table 1 (xxiii) (Potassium (IS 12760))	-
Table 1 (xxiv) (Chloride (IS 11763 ))	-
Table 1 (xxv) (Calcium (IS 5949))	-
Table 1 (xxvi) (Phosphorus (IS 12756))	-
Table 1 (xxvii) (Magnesium (IS 5949))	-
Table 1 (xxviii) (Iodine (ClauseA·2 of IS1224))	-
Table 1 (xxix) ( Copper (Clause 15 of IS 1699))	-
Table 1 (xxx) (Zinc (Clause 15 of IS 1699))	-
Table 1 (xxxi) (Manganese (Clause 35 of IS 3025))	-
Table 1 (xxxii) (Selenium (Clause 35 of IS 3025))	-
Table 1 (xxxiii) (Heavy metals: a) Lead (IS 12074))	-
Table 1 (xxxiii) (Heavy metals: b) Arsenic (IS 11124))	-
Table 1 (xxxiii) (Heavy metals: c) Tin (Clause 17 of IS 2860))	-
Table 1 (xxxiii) (Heavy metals: d)Cadmium (Clause 15 of IS 1699))	-

Partial

-
-

236

IS 1069 (1993)

Quality tolerances for water for storage batteries - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3.2 (Table 1) (Non-volatile residue)	-
Clause 3.2 (Table 1) (Chloride)	-
Clause 3.2 (Table 1) (pH)	-
Clause 3.2 (Table 1) (Heavy metals as Pb)	-
Clause 3.2 (Table 1) (Hardness (As CaCO3))	-
Clause 3.2 (Table 1) (Oxidisable matter)	-
Clause 3.2 (Table 1 S.no.(viii)) (Specific electrical conductivity at 25℃ )	-
Clause 3.2 (Table 1 S.no.(ix)) (Total dissoolved solid)	-

Partial

-
-

237

IS 8086 (1991)

Rehabilitation equipment - Wheelchairs, folding, junior size - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1 (Overall length )	-
Cl.5.1 (Overall width, open)	-
Cl.5.1 (Overall width , folded)	-
Cl.5.1 (Overall height)	-
Cl.5.1 (Sea t height from floor at the front )	-
Cl.5.1 (Slope of the scat)	-
Cl.5.1 (Armrest height from seat)	-
Cl.5.1 (Seat width )	-
Cl.5.1 (Seat depth)	-
Cl.5.1 (Distance between seat and footrest)	-
Cl.5.1 (Clearance of frame from floor )	-
Cl.5.1 (Clearance of foot rest from floor)	-
Cl.5.1 (Wheel diameter)	-
Cl.5.1 (Weight of the wheelchair ( basic model ))	-
Cl. 7.1 (Backrest and Seat)	-
Cl. 7.2 (Frame)	-
Cl. 7.3 (Footrests and Supports)	-
Cl. 7.4 (Footrests and Supports)	-
Cl. 7.5 (Hand Rims)	-
Cl. 7.6 (Brakes )	-
Cl. 7.7 ( Castors)	-
Cl. 7.8 (Wheels)	-
Cl. 7.9 (Clothing Guards)	-
Cl. 7.10 (Folding Mechanism)	-
Cl. 7.11 (Lubrication)	-
Cl. 8 (Finish)	-
Cl. 9.1 (Test for Wheeling)	-
Cl. 9.3 (Load Test)	-
Cl. 9.4 (Test for Folding)	-

Partial

-
-

238

IS 4658 (2019)

Specification for coated paper and board (Art And Chromo) (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5/5.1 (General)	-
5/5.3 (Substance and Tolerance on Substance-in accordance with 6 of IS 1060 (Part 1).)	-
5/5.4 (Sizes and Tolerance on Sizes-in accordance with IS 1064.)	-
5/5.5-Tables 1 and 2 (The coated paper and coated board)	-

Partial

-
-

239

IS 8654 (2019)

Automotive hydraulic brake fluid, heavy duty - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3 Table 1 (pH value)	-

Partial

-
-

240

IS 5852 : Part 1 (2019)

Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4/4.2/4.2.2-see Fig B-1 (REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-
4/4.1 (REQUIREMENTS- Finishing)	-
4/4.2/4.2.1-Table1 (REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-
4/4.1 (REQUIREMENTS- Finishing)	-
4/4.2/4.2.1-Table1 (REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-
4/4.2/4.2.2-see Fig B-1 (REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-
4/4.1 (REQUIREMENTS- Finishing)	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

No Record Found