BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

181

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Mass of Bale)	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Ends per dm)	-
5.2 Table 1 (Picks per dm)	-
5.2 Table 1 (Mass of sack, Gusseted type, g - IS 1964)	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-

Partial

-
-

182

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Cleaning and Disinfecting)	-
Cl 5.2 (Cleaning and Disinfecting)	-
5.2 (Cleaning & Disinfection)	-
Cl 5.13 (De-mountable Parts)	-
Cl 5.13 (De-mountable Parts)	-
5.13 (Demountable Parts, Visual Inspection )	-
Cl 5.6 (Flammability)	-
Cl 5.6 (Flammability)	-
5.6 (Flammability (TC- 2 Samples) )	-
5.6 (Flammability (AR-2 Samples) )	-
5.6 (Flammability (TC- 2 Samples) )	-
5.6 (Flammability (AR-2 Samples) )	-
5.10.2.4 (Exh. Valve Tensile Force (TC-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (SW-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (AR-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (TC-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (SW-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (AR-1 Sample) )	-

Partial

-
-

183

IS 1804 (2004)

Steel wire ropes – Fibre main cores – Specification (fourth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 / 3.2 (Man-Made Fibre CoresMan-made fibre cores shall be made entirely from new fibres of the following types: )	-
5.1 (PHYSICAL REQUIREMENTS / Core Lubrication)	-
5.2 (PHYSICAL REQUIREMENTS / Lay length)	-
7.2 (Nominal Diameter and Nominal Runnage)	-
8 (CORE DESIGNATION)	-
9 / 9.1 (IDENTIFICATION)	-
6 / 6.1 (CHEMICAL CONTENTS / Water Soluble Acids )	-
6.2 (Salt)	-

Complete

-
-

184

IS 17111 (2019)

Heat - Treated steels, alloy steels and free - Cutting steels - Ball and roller bearing steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1.2, Table- 3 (Carbon )	-
Cl.7.1.2, Table- 3 (Sulphur)	-
Cl.7.1.2, Table- 3 (Phosphorus)	-
Cl.7.1.2, Table- 3 (Manganese)	-
Cl.7.1.2, Table- 3 (Silicon)	-
Cl.7.1.2, Table- 3 (Aluminium)	-
Cl.7.1.2, Table- 3 (Chromium)	-
Cl.7.1.2, Table- 3 (Nickel)	-
Cl.7.1.2, Table- 3 (Molybdenum)	-
Cl.7.1.2, Table- 3 (Copper)	-
Cl.7.1.2, Table- 3 (Vanadium)	-
Cl.7.1.2, Table- 3 (Titanium)	-
Cl.7.1.2, Table- 3 (Zinc)	-
Cl.7.1.2, Table- 3 (Tungsten)	-
Cl.7.1.2, Table- 3 (Nitrogen)	-
Cl 4 (Classification and designation)	-
Cl 7.5 (Surface quality)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-

Partial

-
-

185

IS 1993 (2018)

Cold - Reduced tinmill products - Electrolytic tinplate (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Classification)	-
Cl 6.1 (Designation)	-
Cl 10 (Tolerance on dimension and shape )	-
Cl 7.3 (Finish)	-
Cl 7.4 (Passivation and oiling)	-
Cl 7.5 (Imperfections)	-
Cl 8 (Tin Coating mass )	-
Cl 9.2 (Hardness requirement )	-
Cl 9.3 (Tensile requirement )	-

Partial

-
-

186

IS 10080 (1982)

Specification for vibration machine for casting standard cement mortar cubes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4, table 2 (DIMENSIONS AND TOLERANCES)	-
(Cl 3.4.1 of IS 10080 & 5.1 of IS:10086) (Other Requirements (Construction))	-
(Cl 5.2, IS:10086) (Special Requirements for cube moulds)	-
(Cl 5.3,IS:10086) (Arrangement for Fastening/Clamping)	-

Complete

-
-

187

IS 4808 (1982)

Specification for pyrethrum emulsifiable concentrates (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.4 (Flash Point)	-
2.2.3 (Cold test)	-
2.2.5 (Emulsion Stability)	-
2.3 (Total Pyrethrin Content )	-
2.2.6 (Heat Stability)	-
2.2.3 (Cold test)	-
2.1 (Constituents )	-

Complete

-
-

188

IS 9665 (1981)

Specification for propoxur emulsifiable concentrates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point)	-
2.2.4 (Emulsion Stability)	-
2.3.2 (Acidity)	-
2.3.1 (Propoxur Content, NV upto 9)	-
2.3.1 (Propoxur Content, NV above 9 and below 50)	-
2.3.1 (Propoxur Content, NV above 50)	-

Complete

-
-

189

IS 17154 (2019)

Battery operated motorized tricycle - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl. 8.5) (Test For Finish :)	-
(Cl. 8.3) (Static Load Test :)	-
(Cl. 8.2) (Manoeuverability :)	-
(Cl. 8.1) (Raod Test :)	-
(Cl 7) (FINISH : All the metallic parts other than those mentioned in Cl 6.1 shall have a smooth finish & shall be Zinc plated accordance with Grade No. 1 of IS 1573.)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.13) (Suitable means shall be provided on the under side of the tricycle for keeping the crutches or walking stick securely and conveniently.)	-
(Cl. 6.12) (Lubrication:)	-
(Cl. 6.11) (Armrest :)	-
(Cl. 6.11) (Armrest :)	-
(Cl. 6.10) (A tool-cum-accessories box shall be provided behind the seat. )	-
(Cl. 6.9) (Rear Wheel Hub:)	-
(Cl. 6.9) (Rear Wheel Hub:)	-
(Cl. 6.8) (Front Wheel Hub:)	-
(Cl. 6.7) (Brakes :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : Spoke- holes shall be properly punched or drilled.)	-
(Cl. 6.5) (Wheel Rims :The rims shall be free from pitting or uneven plating. )	-
(Cl. 6.5) (Wheel Rims :The wheel rims shall be size 24" for front wheel & 26" for rear wheel conforming to IS 624 : 2003.)	-
(Cl. 6.4) (Tyres & Tubes: Tyres used shall be 24'' size for front wheel and 26" for rear wheels, tyres conforming to IS 2414 While tubes shall conform to IS 2415.)	-
(Cl. 6.3) (Driving Mechanisum:)	-
(Cl. 6.2) (Steering Handle Bar: )	-
(Cl. 6.2) (Steering Handle Bar: )	-
(Cl. 6.2) (Steering Handle Bar: )	-
(Cl.6.1) (Frame : )	-
(Cl.6.1) (Frame : )	-
(Cl.6.1) (Frame : )	-
(Cl 4)Table 1 & Fig 1 (Height of rear wheel supporting frame )	-
(Cl 4)Table 1 & Fig 1 (Back height from seat, )	-
(Cl 4)Table 1 & Fig 1 (Seat width, )	-
(Cl 4)Table 1 & Fig 1 (Seat length, )	-
(Cl 4)Table 1 & Fig 1 (Armrest height from seat, )	-
(Cl 4)Table 1 & Fig 1 (Clearance of footrest from ground, )	-
(Cl 4)Table 1 & Fig 1 (Length of foot rest, )	-
(Cl 4)Table 1 & Fig 1 (Width of foot rest, )	-
(Cl 4)Table 1 & Fig 1 (Overall height, )	-
(Cl 4)Table 1 & Fig 1 (Overall width, )	-
(Cl 4)Table 1 & Fig 1 (Overall length, )	-

Partial

-
-

190

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

191

IS 5410 (2013)

Cement paint - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.4 (Lead Restriction)	-
Cl.4.8, 7.1 - Table 1 i) (Drying Time, Hard Dry)	-
Cl.4.8, 7.1 - Table 1 ii) (Finish)	-
Cl.4.8, 7.1 - Table 1 iv) (Fastness to light)	-
Cl.4.8, 7.1 - Table 1 iii) (Colour)	-
Cl.4.8, 7.1 - Table 1 v) (Residue on sieve (on dry material))	-
Cl.4.8, 7.1 - Table 1 vi) (Resistance to dry rubbing)	-
Cl.4.8, 7.1 - Table 1 vii) (Water Repellency)	-
Cl.4.8, 7.1 - Table 1 viii) (Pot life of mixed paint)	-
Cl.4.8, 7.1 - Table 1 ix) (Recoating Properties)	-
Cl.4.1 (Composition - Portland Cement)	-
Cl.4.1 (Composition - Hydrated Lime)	-
Cl.4.1.1 (Freedom from Organic Binders)	-
Cl.4.2 (Preparation for Use)	-
Cl.4.6 (Durability)	-
Cl.4.7 (Keeping Properties)	-

Partial

-
-

192

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
8.0 (Marking)	-
6.0 (Ratings)	-
6.0 (Ratings)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
7.0 (Classification)	-
9.0 (6A/10A )	-
9.0 (16 A)	-
9.0 (6A/10A )	-
9.0 (16 A)	-
9.0 (6A/10A )	-
9.0 (Checking of dimensions)	-
10.1 (Protection against Electric Shock)	-
10.3 (Protection against Electric Shock)	-
10.5 (Protection against Electric Shock)	-
10.6 (Protection against Electric Shock)	-
11.1 (Provision for Earthing)	-
11.2 (Provision for Earthing)	-
11.5 (Provision for Earthing)	-
12.1 (Terminals)	-
12.2.1 (Terminals)	-
12.2.2 (Terminals)	-
12.2.3 (Terminals)	-
12.2.4 (Terminals)	-
12.2.7 (Terminals)	-
12.2.9 (Terminals)	-
12.2.10 (Terminals)	-
12.2.11 (Terminals)	-
13.1 (Construction of fixed Socket Outlets)	-
13.2 (Construction of fixed Socket Outlets)	-
13.3 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.4 (Construction of fixed Socket Outlets)	-
13.5 (Construction of fixed Socket Outlets)	-
13.9 (Construction of fixed Socket Outlets)	-
13.1 (Construction of fixed Socket Outlets)	-
13.14 (Construction of fixed Socket Outlets)	-
13.16 (Construction of fixed Socket Outlets)	-
13.17 (Construction of fixed Socket Outlets)	-
15.0 (Interlocked socket-outlets)	-
16.1 (Resistance to Ageing )	-
16.2 (Resistance to Harmful Ingress of Water)	-
16.3 (Resistance to humidity)	-
17.1 (Insulation Resistance)	-
17.2 ( Electric Strength)	-
18.0 (Operation of Earthing Contacts)	-
19.0 (Temperature Rise )	-
20.0 (Making & Breaking Capacity)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
21.0 (Normal Operation)	-
22.1 (Verification of Max withdrawal force)	-
22.2 (Verification of Minimum withdrawal force)	-
24.1 (a) Mechanical Strength )	-
24.3 (a) For surface type socket outlet)	-
24.6 (b) For screwed glands of accessories other than ordinary)	-
24.8 (c) For shuttered socket-outlets )	-
24.14.1 (e)Verification of the Non-removal of Covers or Cover-Plates )	-
24.14.2 (f)Verification of the Removal of Covers or Cover-Plates )	-
25.1 (Resistance to heat)	-
25.1 (Resistance to heat)	-
25.2 (Resistance to heat)	-
25.3 (Resistance to heat)	-
25.4 (Resistance to heat)	-
26.1 (Screws, current carrying parts and connections)	-
26.2 (Screws, current carrying parts and connections)	-
26.7 (Screws, current carrying parts and connections)	-
27.1 (Creepage distances, clearances and distances through sealing compound )	-
27.2 (Creepage distances, clearances and distances through sealing compound )	-
27.3 (Creepage distances, clearances and distances through sealing compound )	-
28.1.1 (Glow-Wire Test )	-
28.2 (Resistance to Tracking)	-
29.0 (Resistance to Rusting)	-
12.2.5 (Terminals)	-
8 (Marking)	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (6A/10A )	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
9 (16 A)	-
10.1 (Protection against Electric Shock)	-
10.4 (Protection against Electric Shock)	-
12.1 (Terminals)	-
14.1 (Construction of Plugs & Portables socket outlet )	-
14.2 (Construction of Plugs & Portables socket outlet )	-
14.3 (Construction of Plugs & Portables socket outlet )	-
14.7 (Construction of Plugs & Portables socket outlet )	-
14.8 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.9 (Construction of Plugs & Portables socket outlet )	-
14.1 (Construction of Plugs & Portables socket outlet )	-
14.11 (Construction of Plugs & Portables socket outlet )	-
14.15 (Construction of Plugs & Portables socket outlet )	-
23.1 (Flexible cables & their connection )	-
23.2 (Flexible cables & their connection )	-
23.3 (Flexible cables & their connection )	-
23.4 (Flexible cables & their connection )	-
24.2 (For Portable single socket outlets/ plugs)	-
24.4 (For Portable socket outlets/ plugs)	-
24.5 (For Portable single socket outlets/ plugs)	-
24.7 (For plug pins provided with insulating sleeves)	-
24.9 (For portable multiple and combined socket outlets)	-
24.1 (For plugs)	-
24.11 (For portable socket outlets having means for suspension on a wall)	-
24.12 (For portable socket outlets having means for suspension on a wall)	-
24.13 (For portable socket outlets having means for suspension on a wall)	-
24.15 (Verification of the Removal of Covers or Cover-Plates )	-
24.16 (Verification of the Removal of Covers or Cover-Plates )	-
24.17 (Verification of the Removal of Covers or Cover-Plates )	-
24.18 (Verification of the Removal of Covers or Cover-Plates )	-
28.1.2 (Addiitional tests for plugs with pins provided with insulating sleeves)	-
30.1 (Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-
30.1 (Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-
30.2 (Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-
30.2 (Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-
30.3 (Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-
30.3 (Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-
30.4 (Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-
30.4 (Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-

Partial

-
-

193

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.7.2.2 (Dermatological Safety(Requirement for ECO MARK))	-
Cl 4.7.2.1 (Phosphate (Requirement for ECO MARK))	-
Cl 4.7.2.1 (Synthetic detergent (Requirement for ECO MARK))	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iv) (Synthetic detergent)	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iii) (Free caustic Alkali, as K2O)	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.ii) (Matter insoluble in alcohol)	-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.i) (Total fatty matter)	-
Cl.4.5.1 (Phenolic substances such as cresylic acid, if added)	-
Cl.4.4 (Odour)	-
Cl.4.3 (Sedimentation)	-
Cl.4.2 (Storage)	-
Cl.4.1 (Description)	-

Complete

-
-

194

IS 6047 (2009)

Scouring products for utensil cleaning - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2, Table-1,(ix) (Surface damage)	-
Cl.4.2, Table-1,(viii) (Tough soil cleaning)	-
Cl.4.2, Table-1,(vii) (Cleansing efficacy)	-
Cl.4.2, Table-1,(vi) (Lather)	-
Cl.4.2, Table-1,(v) (Moisture and volatile Matter content at 105 degree C)	-
Cl.4.2, Table-1,(iv) (Matter insoluble in alcohol)	-
Cl.4.2, Table-1,(iii) (Active (reverse) alkalinity)	-
Cl.4.2, Table-1,(ii) (Active matter)	-
Cl.4.2, Table-1,(i) (Retention on 250 microne IS sieve)	-
Clause 4.1 (Description)	-

Complete

-
-

195

IS 12744 : Part 1 (2013)

Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.2 (Lead Restriction)	-
Cl.5.3, 8.1 - Table 1 -i) (Drying time hard dry)	-
Cl.5.3, 8.1 - Table 1 -ii) (Consistency )	-
Cl.5.3, 8.1 - Table 1 -iii) (Finish)	-
Cl.5.3, 8.1 - Table 1 -iv) (Colour in Natural Daylight)	-
Cl.5.3, 8.1 - Table 1 -v) (Wet Opacity)	-
Cl.5.3, 8.1 - Table 1 -vi) (Pigment Content)	-
Cl.5.3, 8.1 - Table 1 -vii) (Zinc Phosphate)	-
Cl.5.3, 8.1 - Table 1 -viii) (Red Oxide (as Fe2O3) )	-
Cl.5.3, 8.1 - Table 1 -ix) a) (Flexibility and adhesion a) Scratch Hardness (Load 800 g))	-
Cl.5.3, 8.1 - Table 1 -ix) b) (Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus)	-
Cl.5.3, 8.1 - Table 1 -x) a) (Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days))	-
Cl.5.3, 8.1 - Table 1 -x) b) (Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours))	-
Cl.5.3, 8.1 - Table 1 -xi) (Flash Point)	-
Cl.5.3, 8.1 - Table 1 -xii) (Mass)	-
Cl.5.3, 8.1 - Table 1 -xiii) (Keeping Properties)	-

Complete

-
-

196

IS 428 (2013)

Washable distemper - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.9.2.2 ( Chromium VI and its compund (Requirement for Eco-Mark))	-
Cl. 6.9.2.2 (Cadmium (Requirement for Eco-Mark))	-
Cl. 6.9.2.2 (Lead (Requirement for Eco-Mark))	-
Cl. 6.9.2.1 (Volatile organic compounds (Requirement for Eco-Mark))	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ix) (Accelerated storage stability)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. viii) (Resistance to alkali)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vii) (Recoating Properties)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi) (Residue on sieve, Type 2)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi) (Residue on sieve, Type 1)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. v) (Fastness to light)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iv) (Colour)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iii) (Finish)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ii) (Consistency )	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b) (Drying Time a) Hard Dry, Type 2)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b) (Drying Time a) Hard Dry, Type 1)	-
Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) a) (Drying Time a) Surface Dry, Type 2)	-
Cl.6.6 (Keeping Proterties)	-
Cl.6.5 (Lead Restriction)	-
Cl.6.3 (Application)	-
Cl.6.2 (Thining)	-
Cl.6.1 (Foam and condition)	-

Partial

-
-

197

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

- View breakup
Rs.3000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Elongation)	-
10.1 (Tensile Strength)	-
7.2.2 (Matched Belts - Code)	-
7.2.1 (Matched Belts - Difference)	-
7.1 (Belt Pitch Length)	-
6.0 (Designation)	-
5 Table 2B (Cross sectional dimension)	-
5 Table 2B (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 2A (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-
5 Table 1 (Cross sectional dimension)	-

Complete

-
-

198

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1,(Clauses 5.1 and 7.2) (Carbon)	-
Table-1,(Clauses 5.1 and 7.2) (Sulphor)	-
Table-1,(Clauses 5.1 and 7.2) (Phosphorous)	-
Table-1,(Clauses 5.1 and 7.2) (Manganese)	-
Table-1,(Clauses 5.1 and 7.2) (Silicon)	-
Table-1,(Clauses 5.1 and 7.2) (Aluminium)	-
Table-1,(Clauses 5.1 and 7.2) (Chromium)	-
Table-1,(Clauses 5.1 and 7.2) (Nickel)	-
Table-1,(Clauses 5.1 and 7.2) (Molybdenum)	-
Table-1,(Clauses 5.1 and 7.2) (Copper)	-
Table-1,(Clauses 5.1 and 7.2) (Boron)	-
Table-1,(Clauses 5.1 and 7.2) (Vanadium)	-
Table-1,(Clauses 5.1 and 7.2) (Titanium)	-
Table-1,(Clauses 5.1 and 7.2) (Nitrogen)	-
Table-1,(Clauses 5.1 and 7.2) (S+P)	-
Cl 9 (Dimensions & tolerances) ()	-

Partial

-
-

199

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (chem) (MATERIAL)	-
4.6.2 (TRANSPARANCY)	-
4.6.3 (LEAKAGE TEST)	-
4.6.4 (DROP TEST)	-
4.6.4, clause 8 of IS:2798:1998 (Drop test )	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- c. Air pressure leakage)	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- b. Vibration leakage)	-
4.6.3, clause 6 of IS:2798:1998 (Leakage test- a. Closure leakage )	-
4.6.2 Annex A (Transparency)	-
4.5, IS:2798:1998 (Wall thickness- Bottom, in mm)	-
4.5, IS:2798:1998 (Wall thickness- Middle , in mm)	-
4.5, IS:2798:1998 (Wall thickness- Top , in mm )	-
4.4 , clause 5 of IS:2798:1998 (Brimful capacity in ml)	-
4.3 (Workmanship, Finish & Appearance)	-
4.2 (Design, Shape & Dimension )	-
4.6.5 (MIGRATION TEST)	-
4.6.6 (PORTABILITY TEST)	-
4.1 (Material )	-
4.6.6 (chem) (Water Potability test (after 30 days) (a) Taste (b) Odour)	-
4.6.5.1 (chem) (Colour migration (Container))	-
4.6.5.1 (chem) (Colour migration (Caps))	-
4.6.5 , IS:9845:1998 (chem) (Migration- b. Amount of extractive)	-
4.6.5 , IS:9845:1998 (chem) (Migration- a. Amount of extractive)	-
4.6.5.1 (chem) (Colour migration (Caps))	-

Partial

-
-

200

IS 1746 (1992)

Shoe polish, paste - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Odour)	-
4.1.2 (Colour)	-
4.1.3 (Consistency)	-
4.1.4 (Applicability)	-
4.1.6 (colour of water extract)	-
4.2 (table 1 S.no(i)) (Softeing point of non-volatile matter)	-
4.2 (table 1 S.no(ii)) (Ash of the non-volatile matter)	-
4.2 (table 1 S.no(iii)) (pH of water extract )	-
4.2 (table 1 S.no(v)) (Flash point of volatile portion,)	-
4.2 (table 1 S.no(vi)) (Non-volatile matter )	-

Partial

-
-

201

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (CARBON)	-
6.0 (SULPHUR)	-
6.0 (PHOSPHORUS)	-
6.0 (MANGANESE)	-
6.0 (SILICON)	-
6.0 (ALUMINIUM)	-
6.0 (NITROGEN)	-
6.0 (MICRO ALLOYS)	-
Cl 7 (UTM)	-
Cl 8.5 (Workmanship)	-
Cl 8.6 (Workmanship)	-
Cl 9 (Workmanship)	-
Cl 10 (Length, Width & Thickness)	-
Cl. 10 (Out of square)	-
Cl. 10 (Flatness)	-
Cl. 10 (Camber)	-
Cl. 10 (Width)	-
Cl. 10 (Thickness)	-
Cl. 8.5.3 Table 6 (Surface Roughness)	-
Cl. 7.2 Table 7 (Bend Test)	-

Partial

-
-

202

IS 4320 (1982)

Specification for thiram, technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2 Table 1 (Loss on drying at 60°C)	-
2.2 Table 1 (Bis ( dimethylthiocarbamoyl ) disulphide)	-
2.2 Table 1 (Ash content)	-

Complete

-
-

203

IS 15500 : Part 1 to 8 (2004)

Deepwell handpumps, components and special tools - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2/2.3,(Refer 15500(Part 1 to 8)& 5 (Part 1) (Raw material)	-
2/2.3,(Refer 15500(Part 1 to 8)& 9.4 (Part 1) (Dimensions & critical dimensions in conformance with the relevant figures in Part 4.)	-
2/2.3,(Refer fig 4.1 of Part4) & 9.4 (Part 1) (Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-
2/2.3,(Refer fig 4.2 of Part4) (Dimensions of FIG. 4,2 HEAD— EWDP)	-
2/2.3,(Refer fig 4.3A of Part4) (Dimensions of Fig 4.3A Side Plate)	-
2/2.3,(Refer fig 4.3B of Part4) (Dimensions of Fig 4.3B Head Flange)	-
2/2.3,(Refer fig 4.3C of Part4) (Dimensions of Fig 4.3C Back Plate —Standard (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.3D of Part4) (Dimensions of Fig 4.3D Bracket — Standard (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.3E of Part4) (Dimensions of Fig 4.3E Back Plate — EDWP)	-
2/2.3,(Refer fig 4.3F of Part4) (Dimensions of Fig 4.3F Bracket — EDWP)	-
2/2.3,(Refer fig 4.3G of Part4) (Dimensions of Fig 4.3G Axle Bust — Right)	-
2/2.3,(Refer fig 4.3H of Part4) (Dimensions of Fig 4.3H Axle Bust — Left)	-
2/2.3,(Refer fig 4.3I of Part4) (Dimensions of Fig 4.3 I Front Top End Plate)	-
2/2.3,(Refer fig 4.3IJof Part4) (Dimensions of 4.3J Front Bottom End Plate)	-
2/2.3,(Refer fig 4.3IKof Part4) (Dimensions of Fig 4.3K Gusset — Standard w (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.3L Jof Part4) (Dimensions of Fig 4.3L Gusset — EDWP (For EDWP) )	-
2/2.3,(Refer fig 4.4 Jof Part4) (Dimensions of FIG. 4.4 FRONTCOVER)	-
2/2.3,(Refer fig 4.5A of Part4) (Dimensions of FIG. 4.5A Flange for Third Plate)	-
2/2.3,(Refer fig 4.5 B of Part4) (Dimensions of FIG. 4.5B Guide Bush )	-
2/2.3,(Refer fig 4.6 of Part4) (Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.7 of Part4) (Dimensions of FIG.4.7 HANDLE— EDWP)	-
2/2.3,(Refer fig 4.8A of Part4) (Dimensions of FIG 4.8A Handle Bar — Standard (For SDWR VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.8B of Part4) (Dimensions of FIG 4.8B Handle Bar — EDWP)	-
2/2.3,(Refer fig 4.8C of Part4) (Dimensions of FIG 4.8C Chain Guide)	-
2/2.3,(Refer fig 4.8 D of Part4) (Dimensions of Fig 4.8D Bearing Housing )	-
2/2.3,(Refer fig 4.9 of Part4) (Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-
2/2.3,(Refer fig 4.10 of Part4) (Dimensions of FIG. 4.10 T-BAR (For EDWP only))	-
2/2.3,(Refer fig 4.11 of Part4) (Dimensions of FIG; 4.11 COUNTER WEIGHT (For EDWP only))	-
2/2.3,(Refer fig 4.12A of Part4) (Dimensions of Fig 4.1 2A Telescopic Stand — Standard (For borewell with 150 NB casing pipe)(For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.12B of Part4) (Dimensions of Fig 4.12B Normal Stand — Standard (For borewell with 1001125 NB casing pipe) (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3,(Refer fig 4.13A of Part4) (Dimensions of Fig 4.1 3A Telescopic Stand — EDWP (For borewell with 150 NB casing pipe) FOR EDWP )	-
2/2.3,(Refer fig 4.14 A of Part4) (Dimensions of Fig 4.1 4A Stand Pipe — Standard (For SDWP, VLOM-65, VLOM-50))	-
2/2.3,(Refer fig 4.14 B of Part4) (Dimensions of Fig 4.14B Stand Pipe — EDWP (For EDWP))	-
2/2.3,(Refer fig 4.14 C of Part4) (Dimensions of Fig 4.14C Stand Flange)	-
3/3.3.1,(Refer Cl 9.4.1 and 9.4.3 15500(Part 1 ) (Head and Cylinder Assemblies)	-
6.1 of Part 1 ,refer Condition 4 of IS 1573 (Electro-galvanizing )	-
6.2 of Part 1 ,Refer IS 4759 (Galvanizing)	-
6.2.1 of Part 1,Refer Cl 5.9 of IS 2629 (Galvanizing)	-
9.4/9.4.1.1 of part 1 (Dimensional and Other Tests/head assembly )	-
9.4/9.4.1 .2 of part 1 (Head assembly )	-
9.4/9.4.1 .2 of part 1 (handle shall be checked for lateral play at the end of the square section of handle on either side)	-
9.4/9.4.1.2 of part 1 (The clearance between the handle and the bracket )	-
9.4/9.4.1 .2 of part 1 (The stroke of the pump )	-
9.4/9.4.2.1 of part 1 (Handle Assembly)	-
9.4/9.4.2.1 of part 1 (Handle Assembly)	-
9.4/9.4.3of part 1 (Cylinder Assembly )	-
9.4/9.4.3of part 1 (Cylinder Assembly )	-
9.4/9.4.3of part 1 (Cylinder Assembly )	-
9.4/9.4.3of part 1 refer table 3 (Discharge of Pump)	-
9.4/9.4.4of part 1 (Valve Assemblies)	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG.4.1 HEAD— STANDARD(For SDWP, VLOM-65 and VLOM-50))	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG. 4.4 FRONT COVER)	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG. 4.24 HANDLE AXE )	-
2/2.3 ,Refer Fig 3.1 (Dimensions of FIG.4.27 WASHER)	-
2/2.3 ,Refer Fig 3.1 and Refer annex B ( HexagonaI Nut — )	-
2/2.3 ,Refer Fig 3.1 and Refer annex B (Hexagonal Bolt)	-
2/2.3 ,Refer Fig 3.1 and 3.2 (Dimensions of FIG.4.6 HANDLE— STANDARD (For SDWP, VLOM-65 & VLOM-50))	-
2/2.3 ,Refer Fig 3.1 and 3.2 (Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-
2/2.3 ,Refer Fig 3.1 and 3.2 (Dimensions of FIG. 4.26 BEARING SPACER)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Prevailing Torque Type Hex. Nut,)	-
2/2.3 ,Refer Fig 3.1 and 3.2,Annex B (Hex. Bolt)	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG. 4,2 HEAD— EWDP)	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG. 4.4 FRONT COVER)	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG. 4.24 HANDLE AXE )	-
2/2.3 ,Refer Fig 3.3 (Dimensions of FIG.4.27 WASHER)	-
2/2.3 ,Refer Fig 3.3 and annex B (Hexagonal Nut—)	-
2/2.3 ,Refer Fig 3.3 and annex B (Hexagonal Bolt)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Dimensions of FIG.4.7 HANDLE— EDWP)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Dimensions of FIG. 4.9 CHAIN WITH COUPLING)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Dimensions of FIG. 4.26 BEARING SPACER)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Prevailing Torque Type Hex. Nut,)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Hex. Bolt —)	-
2/2.3 ,Refer Fig 3.3 and 3.4 (Ball bearing, single side shielded)	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 4.22 PLUNGER ROD — STANDARD (For SDWP))	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 5.1 CYLINDER BODY— STANDARD (For SDWP))	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 6.1 BRASS LINER)	-
2/2.3 ,Refer Fig 3.5 (Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.6 FOLLOWER — SDWP )	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 6.12 CHECK VALVE SEAT— STAN~AR~ (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.5 and 3.6 (Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 5.5 A Upper CAPS— VLOM-65 (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 5.5 B Bottomr CAPS— VLOM-65 (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 6.1 B BRASS LINER)	-
2/2.3 ,Refer Fig 3.7 (Dimensions of FIG. 7.4 SEALING RING— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.8 FOLLOWER— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.10 CHECKVALVE— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.13 CHECK VALVE — VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 6.14 CAGE (For VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.8 LOWERVALVE SEATING— VLOM-65 68)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Dimensions of FIG. 7.10 O-RING— VLOM-65)	-
2/2.3 ,Refer Fig 3.7 and 3.8 (Check Nut)	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG. 5.3 CYLINDERBODY— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 (Dimensions ofFIG. 5.6 CYLINDERCAPS— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG. 6.1 C BRASS LINER)	-
2/2.3 ,Refer Fig 3.9 (Dimensions of FIG. 7.5 SEALINGRING— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 6.15 PLUNGERVALVE BODY— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 6.16 CHECKVALVE BODY— VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 7.2 PUMP BUCKET — VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 7.9 BOBBIN)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Dimensions of FIG. 7.11 O-Ring — VLOM-50)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Hexagonal Nut)	-
2/2.3 ,Refer Fig 3.9 and 3.10 (Hexagonal Bolt)	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG.4.23 PLUNGERROD — LONG (For EDWP, VLOM-65 & VLOM-50 ))	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 5.2 CYLINDERBODY— LONG (For EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 5.4 REDUCERCAP (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 6.1 B BRASS LINER)	-
2/2.3 ,Refer Fig 3.11 (Dimensions of FIG. 7.3 SEALINGRING— STANDARD (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.2 PLUNGERYOKE BODY (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.3 UPPERVALVE (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.4 BUCKETSPACER— STANDARII (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG.6.5 BUCKET SPACER — LOWER (For EDWP))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.7 FOLLOWER— EDWP)	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.9 CHECK VALVE— STANDARD (For SDWP & EDWP) )	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.11 RUBBERSEATRETAINER (For SDWP & EDWP))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 6.13 CHECK VALVE — VLOM-65)	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 7.1 PUMPBUCKET— STANDARD (For SDWP, EDWP & VLOM-65) )	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 7.6 UPPERVALVE SEATING (For SDWP, EDWP & VLOM-65))	-
2/2.3 ,Refer Fig 3.11 and 3.12 (Dimensions of FIG. 7.7 LOWERVALVE SEATING— STANDARD (For SDWP & EDWP) )	-

Partial

-
-

204

IS 13049 (1991)

diaphragm type (plastic body) float operated valves for cold water services

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (NOMINAL SIZE- )	-
6-6.1 (MANUFACTURE AND WORKMANSHIP)	-
6-6.2 (MANUFACTURE AND WORKMANSHIP)	-
7-7.1 (CONSTRUCTION-Inlet Connection- The inlet shank shall be not less than 48 mm In length.)	-
7-7.1-Annex A (CONSTRUCTION-Inlet Connection- External screw on inlet connections shall be such as to meet the test requirements of Annex A.)	-
7-7.2-7.2.1 (CONSTRUCTION-Seats and body)	-
7-7.2-7.2.2 (CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;)	-
7-7.2-7.2.3 (CONSTRUCTION-Seats and body-The distance between the seat outlet orifice and the shutting off face of the diaphragm shall be 15 mm, Min in the fully opened position.)	-
7-7.3 (CONSTRUCTION-Diaphragm-Diaphragms made of synthetic rubber shall have the form and dimensions as required for the operation of the valve.)	-
7-7.4 (CONSTRUCTION-Back Nuts-Annex A)	-
7-7.4 (CONSTRUCTION-Back Nuts-Threads on backnuts shall also comply WIth the test requirements of Annex A.)	-
7-7.5-7.5.1 (CONSTRUCTION-Floats, Float Arm and Assembly-)	-
7-7.5-7.5.2 (CONSTRUCTION-Floats, Float Arm and Assembly-)	-
7-7.5-7.5.3 (CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Initial Deflection shall not be more than 25 mm)	-
7-7.5-7.5.3 (CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Additiononal deflection after loading for 28 days as specified in Annex B shall not be more than 12 mm)	-
7-7.5-7.5.3 (CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Total deflection thus shall not he more than 37 mm)	-
7-7.6-7.6.1 (CONSTRUCTION-Discharge Arrangements)	-
7-7.6-7.6.2 (CONSTRUCTION-Discharge Arrangements)	-
7-7.6-7.6.3 (CONSTRUCTION-Discharge Arrangements)	-
8-8.1 (PERFORMANCE TEST-Hydraulic Test)	-
8-8.2 (PERFORMANCE TEST-Shut Off Test-Annex C)	-
8-8.4 (PERFORMANCE TEST-Flow Test- Annex E)	-
8-8.6 (PERFORMANCE TEST-Test for Hydraulic Pressure on Discbarge Arrangements-Annex G)	-

Complete

-
-

205

IS 15058 (2002)

PVC water - Stops at transverse contraction joints for use in masonry and concrete dams - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,4.1 Fig.1 (SHAPE AND DIMENSIONS)	-
5, 5.1 (WORKMANSHIP AND FINISH)	-
5.2 (WORKMANSHIP AND FINISH)	-
3.3 (Colour)	-
3.2 Table 1, iv) Annex A (Water absorption)	-
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11) (Hardness (Shore A))	-
3.2 Table 1, i) IS 13360 (Part 5/Sec 1) (Tensile strength)	-
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1) (Elongation,)	-
3.2 Table 1, v) Annex G of IS 9766 (Cold bend temperature at which samples does not crack)	-
3.2 Table 1,vi) b) Annex B (Accelerated extraction test: Elongation)	-
3.2 Table 1,vi) a) Annex B (Accelerated extraction test Tensile strength)	-
3.2 Table 1,vii) f) Annex C (Stability in effects of alkalies test Dimension change)	-
3.2 Table 1,vii) c) Annex C (Stability in effects of alkalies test Change in hardness at 7 days )	-
3.2 Table 1,vii) b) Annex C (Stability in effects of alkalies test Weight decrease at 7 day)	-
3.2 Table 1,vii) a) Annex C (Stability in effects of alkalies test Weight increase at 7 day)	-
3.2 Table 1,vii) e) Annex C (Stability in effects of alkalies test Weight decrease at 28 days)	-
3.2 Table 1,vii) d) Annex C (Stability in effects of alkalies test Weight increase at 28 days)	-

Complete

-
-

206

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2 (Dimensions)	-

Partial

-
-

207

IS 14587 (1998)

Prelaminated Medium Density Fibre Board -specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Dimensions and tolerances)	-
10.2, Table-1 (Test for Density)	-
10.4, Table-1 (Test for Water Absorption)	-
10.5 (test for swelling in water)	-
10.6 (test for modulis of rupture)	-
10.7 (Test for tensile strength perpendicular to Surface)	-
10.8 (Test for tensile strength perpendicular to Surface after ageing )	-
10.9 (test screw withdrawal strength)	-
10.12 (test for resistance to crack)	-
10.13 (test for resistance to cigarette burn)	-

Partial

-
-

208

IS 4351 (2003)

Steel Door Frames -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Sizes)	-
6.2 (Tolerances)	-
6.3 (Designation)	-
7, Table 2 (Profile)	-
7, Table 2 (Size, X)	-
7, Table 2 (Size, Y)	-
7, Table 2 (Rebate)	-
8.0 (CONSTRUCTION)	-
9.0 (BASE TIES)	-
10.1 (Fixing Lugs (Holdfasts))	-
10.2, Table 3 (Steel butt hinge— medium weight)	-
10.2, Table 3 (Stainless steel butt hinges medium weight)	-
10.2, Table 3 (Steel rising butt hinges)	-
10.2, Table 3 (Mild steel parliament hinges)	-
10.2, Table 3 (Mild steel light weight tee hinges)	-
10.3 (Mortar Guards)	-
10.4 (Aldrops, Sliding Bolts and Tower Bolts)	-
10.5 (Lock Strike Plate)	-
10.6 (Shock Absorbers)	-
11.1 (Pre-treatment and Phosphating)	-
11.2 (Painting)	-
11.3 (Powder Coatings)	-
5, Table 1 (Mild steel sheet (cold rolled))	-
5, Table 1 (Galvanized steel sheets — Plain grade — Lock forming (GPL), Zinc coating 120 g/m2 inchssive of both sides)	-
5, Table 1 (Stainless steel Grade — X07Crl 7 (430) X04Cr19N;; (304 S1 ))	-

Complete

-
-

209

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2 (Carbon Content)	-
Clause 4.2 (Sulphur)	-
Clause 4.2 (Phosphorus)	-
Clause 4.2 (Manganese)	-
Clause 4.2 (Silicon)	-
Clause 4.2 (Chromium)	-
Clause 4.2 (nickel)	-
Cl 3 (NOMINAL SIZES)	-
Cl 4 (MATERIAL)	-
Cl 5 (MANUFACTURE)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 7 (0)	-

Partial

-
-

210

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
8.3 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
10.1.6 (TENSILE STRENGTH)	-
10.1.7 (Table-2) (STATIC BENDING STRENGTH)	-
10.1.7 (Table-2) (STATIC BENDING STRENGTH)	-
10.1.8 (Table-3) (WET BENDING STRENGTH)	-
10.1.8 (Table-3) (WET BENDING STRENGTH)	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-

Partial

-
-

First
Prev
6
7
8
9
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

No Record Found