BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

661

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries — Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 9.2, Table-4 (L175 Or A25, Carbon)	-
Clause 9.2, Table-5 (L245R or BR, C)	-
Clause 9.2, Table-5 (L320N or X46N, V)	-

Partial

-
-

662

IS 8446 (1991)

Pesticide - Carbendazim (MBC) WP - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.3 table 1 (Material passing through 75 micron IS sieve)	-
3.3 table 1 (suspensibility)	-
3.3 table 1 (Acidity (as H2SO4), or Alkalinity (as NaOH) )	-

Complete

-
-

663

IS 3074 (2013)

Steel tubes for automotive purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Workmanship)	-
6 (STRAIGHTNESS)	-
8.2,15,17,22, Table 3,5 &7 (Tensile Tests,IS 1608 Part 1)	-
8.3,18, (Flattening Test)	-
8.4 (Crushing Test)	-
8.5 (Drift Test)	-
7, 20,Table 1,2,4 &6 ( C)	-
7, Table 1,2,4 &6 (S)	-
7, Table 1,2,4 &6 (P)	-
7, Table 1,2,4 &6 (Mn)	-
7, Table 1,2,4 &6 (Si)	-
7, Table 1,2,4 &6 (Cr)	-
7, Table 1,2,4 &6 (Mo)	-
7, Table 1,2,4 &6 (Ni)	-

Partial

-
-

664

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

665

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, Table 1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

666

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Cistern)	-
Cl 5.1 (Cistern)	-
Cl 5.2 (Cover)	-
Cl 5.3 (Flush pipe)	-
Cl 5.3 (Flush pipe)	-
Cl 5.4 (Inlet and overflow holes)	-
Cl 5.5 (Float valve)	-
Cl 5.6 (Operating mechanism / lever)	-
Cl 5.7 (String (Chain))	-
Cl 5.8 (Overflow pipe)	-
Cl 5.8 (Overflow pipe)	-
Cl 7.1 (Flushing Arrangements)	-
Cl 7.2 (Working water level)	-
Cl 7.3 (Freedom from self-siphonage)	-
Cl 7.4 (Reduced water level)	-
Cl 7.5 (Discharge capacity)	-
Cl 7.6 & 9.2 (Discharge rate )	-
Cl 8.1 (Distortion resistance test)	-
(Cl 8.2) (Dead load test)	-
(Cl 8.3) (Front thrust test)	-
(Cl 8.4) (Impact test)	-
(Cl 9.3) (Endurance test)	-
(Cl 9.3) (Endurance test)	-
(Cl.6) (Finish)	-

Complete

-
-

667

IS 8249 (2019)

Zinc sulphate heptahydrate, agricultural grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Clauses 3.2 and 6.2) Table 1 (Matter insoluble in water)	-
(Clauses 3.2 and 6.2) Table 1 (Zinc (as Zn))	-
(Clauses 3.2 and 6.2) Table 1 (Lead (as Pb))	-
(Clauses 3.2 and 6.2) Table 1 (Copper (as Cu))	-
(Clauses 3.2 and 6.2) Table 1 (Magnesium (as Mg))	-
(Clauses 3.2 and 6.2) Table 1 (pH)	-
(Clauses 3.2 and 6.2) Table 1 (Sulphur (as S))	-
(Clauses 3.2 and 6.2) Table 1 (Cadmium (as Cd))	-
(Clauses 3.2 and 6.2) Table 1 (Arsenic (as As))	-
3.1 (Description)	-
(Clauses 3.2 and 6.2) Table 1 (pH)	-
(Clauses 3.2 and 6.2) Table 1 (Sulphur (as S))	-
(Clauses 3.2 and 6.2) Table 1 (Cadmium (as Cd))	-
(Clauses 3.2 and 6.2) Table 1 (Arsenic (as As))	-
3.1 (Description)	-

Partial

-
-

668

IS 2569 (1978)

Specification for malathion water dispersible powder concentrates

- View breakup
Rs.6500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2. Table1.i (Malathion Content)	-
2.2. Table1.ii (Sieving requirement)	-
2.2. Table1.iii (Suspensibility)	-
2.2. Table1.iv (Acidity)	-

Complete

-
-

669

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2 (FINISH-anodic casting -Min Local thickness)	-
Cl. 8.2 (Ref. Cl. 11.1 of IS 1868:1996) ( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996) (Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-
3 (TYPES)	-
4 (SIZES)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-S)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-W)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-Pin dia)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
7.1 (MANUFACTURE-General)	-
7.2 (MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-
8.1 (FINISH)	-
8.2 (FINISH)	-

Partial

-
-

670

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 ( Designation)	-
Cl 5 (General Requirements)	-
Cl 6 & Table 1,2 or 3 (Linear Density)	-
Cl 6 & Table 1,2 or 3 (Breaking Force)	-

Complete

-
-

671

IS 2546 (1974)

Specification for galvanized mild steel fire bucket (First Revision)

- View breakup
Rs.4200/- and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1,2.2,2.3 (Carbon)	-
Cl. 2.1,2.2,2.3 (Sulphur)	-
Cl. 2.1,2.2,2.3 (Phosphorus)	-

Complete

-
-

672

IS 3502 (2009)

Steel chequered plates (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (IS-2062, E250A) (CARBON)	-
Cl.4.1 (IS-2062, E250A) (SULPHUR)	-
Cl.4.1 (IS-2062, E250A) (PHOSPHURS)	-
Cl.4.1 (IS-2062, E250A) (MANGANESE)	-
Cl.4.1 (IS-2062, E250A) (SILICON)	-
Cl.4.1 (IS-2062, E250A) (CARBON EQUIVALENT)	-
Cl 5 (Workmanship)	-
Cl 6 (Workmanship)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl. 11 (Weight)	-
Cl. 10 (Thickness)	-
Cl. 10 (Width)	-
Cl.8 (Elongation)	-
Cl.8 (Yield Stress)	-

Partial

-
-

673

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, 5.2 & Table1 (Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-

Partial

-
-

674

IS 2266 (2019)

Steel wire ropes for general engineering purpose - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 8.2 (Phosphorus)	-
4 (Rope Size and Tolerance )	-
5 (Minimum Breaking Force)	-
6 (General Requirements)	-
7 (Construction)	-
8 (a) Fibre Core)	-
8 (b) Steel Core)	-
9 (Joints)	-
10 (Galvanizing)	-
12 (d) lay)	-
12 (f) length of wire rope)	-
Clause 8.2 (Grade-1, Table-1, IS 1835:1976, Carbon)	-
Clause 8.2 (Sulphur)	-
8 (a) Fibre Core)	-
Clause 8.2 (Manganese)	-
Clause 8.2 (Silicon)	-
Clause 8.2 (Copper)	-
Clause 8.2 (Nickel)	-
Clause 8.2 (Chromium)	-

Partial

-
-

675

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- Relevant parts of IS 228.)	-
Cl. 5.1 (Manganese- Relevant parts of IS 228.)	-
Cl. 5.1 (Sulphur- Relevant parts of IS 228.)	-
Cl. 5.1 (Phosphorus- Relevant parts of IS 228.)	-

Partial

-
-

676

IS 2141 (2000)

Hot dip galvanized stay strand - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (S)	-
4 (P)	-
9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core)	-
9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core)	-
11 (a) Size)	-
11 (b) Construction)	-
11 (c) tensile designation)	-
11 (d) lay)	-
11 (e) coating)	-
11 (f) length)	-
11 ( g) mass)	-
11 (i) lot number along with the order number)	-
9 (a) Tensile)	-
9 (b) Elongation)	-
9 (c) Galvanizing Test)	-
9.2 referes to IS 4826, Table 1 (Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core)	-
9.2 referes to IS 4826, Table 1 (Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core)	-
11 (a) Size)	-
11 (b) Construction)	-
11 (c) tensile designation)	-
11 (d) lay)	-
11 (e) coating)	-
11 (f) length)	-
11 ( g) mass)	-
7 (Freedom from defects)	-
9 (a) Tensile)	-
9 (b) Elongation)	-
9 (c) Galvanizing Test)	-

Partial

-
-

677

IS 2090 (1983)

Specification for high tensile steel bars used in prestressed concrete (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1.1 (Sulphur- Relevant parts of IS 228 )	-
3.1.1 (Phosphorus- Relevant parts of IS 228 )	-

Partial

-
-

678

IS 3224 (2002)

Valve fittings for compressed gas cylinders excluding liquefied petroleum gas (LPG) cylinders - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Types of Valve: Type A )	-
4.2.1 (Types of Valve:TypeB)	-
4.2.1 (Types of Valve:Type C)	-
5.2.1.1.1 ( Lead )	-
5.2.1.1.1 ( Tin)	-
5.2.1.1.1 ( Iron)	-
5.2.1.1.1 (Nickel)	-
5.2.1.1.1 ( Silicon)	-
4.1 (Classification of valve:direct acting valves )	-
4.1 (Classification of valve:indirect acting valves)	-
5.2 Table-7 and Table-8 (Chemical Composition)	-
5.3.1 (Tensile Strength- IS 1608)	-
5.3.1 (Elongation- IS 1608)	-
5.3.2 (Izod impact strength-IS 1598 for brass,manganesebronzeor aluminium bronze, aluminium silicon bronze)	-
5.3.2 (Izod impact strength-IS 1598 for for steel)	-
6.1.12-Table 1 ( Design Criteria : Diameter of main gas passages in Valve stem a)	-
7.2.2 (The bursting pressure range of the bursting discs fitted to CO2 cylinders)	-
8.1.3- Fig. 8, and in Table 3 and Table 4 (Type of Threads)	-
9.1 - Table 7,8 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3 -Tables 7 and 8 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.1 - Table 7,8 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.1 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.2 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.3 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.4 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
9.3.5 (VALVE OUTLET CONNECTIONS AND SPINDLES)	-
10.1.1.1 (Hydrostatic test)	-
10.1.1.3 (Valve Impact test)	-
10.1.1.5 (Cycle test)	-
10.1.1.6 (Stress corrosion test for copper alloy valve bodies)	-

Partial

-
-

679

IS 1855 (2003)

Stranded steel wire ropes for winding and man - Riding haulages in mines - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (as per IS 1835) (Carbon- Is228)	-
6.1 (as per IS 1835) (Manganese - IS 228)	-
6.1 (as per IS 1835) (Silicon - IS 228)	-
6.1 (as per IS 1835) (P + S - IS 228)	-
6.3.1 (Joints - IS 1855)	-
6.4.1 (Direction of Lay- IS 1855)	-
6.4.2 (Length of Lay- IS 1855)	-
6.5.1-Table 1 to Table 7 (Mass of Rope with Fiber core - IS 1855)	-
6.5.1-Table 1 to Table 8 (Mass of Rope with Steel core - IS 1856)	-
8.1 (LUBRICATION-IS1855)	-
9 (FREEDOM FROM DEFECTS-IS 1855)	-
6.1 (as per IS 1835) (Sulphur - IS 228)	-
6.1 (as per IS 1835) (Phosphorus - IS228)	-
6.1 (as per IS 1835) (Copper-IS228)	-
6.1 (as per IS 1835) (Nickel - IS 228)	-
6.1 (as per IS 1835) (Chromium - IS 228)	-

Partial

-
-

680

IS 2568 (1978)

Specification for malathion dusting powders

- View breakup
Rs. 3300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2. Table1.i (Malathion content)	-
2.2. Table1.ii (High temperature stability after storage for 20 hours at 90°C)	-
2.2. Table1.iii (Material passing through 75-micron IS Sieve)	-
2.2. Table1.iv (Bulk'density after compacting)	-
2.2. Table1.v (Acidity/Alkalinity)	-

Complete

-
-

681

IS 447 (1988)

Specification for rubber hose for welding (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.2 - Table 1 (Dimensions and Tolerances)	-
Cl. 3.2 - Table 1 (Dimensions and Tolerances)	-
Cl. 3.2 - Table 1 (Dimensions and Tolerances)	-
Cl. 3.2 - Table 1 (Dimensions and Tolerances)	-
Cl. 3.3 - Table 2 (Physical Requirements)	-
Cl. 3.3 - Table 2 (Physical Requirements)	-
Cl. 3.3 - Table 2 (Physical Requirements)	-
Cl. 3.3 - Table 2 (Physical Requirements)	-
Cl. 3.3 - Table 2 (Physical Requirements)	-
Cl. 3.4 - Table3 (Performance Requirements)	-
Cl. 3.4 - Table3 (Performance Requirements)	-

Partial

-
-

682

IS 1812 (1982)

Specification for carbon steel wire for the manufacture of wood screws (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

683

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

684

IS 14246 (2013)

Continuously pre-painted galvanized steel sheets and coils (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2 (Workmanship)	-
Cl 6.2 (Press)	-
Cl 6.3 (HWB)	-
Cl 6.4 (Load Resistance)	-
Cl 6.5 (Cross Hatch)	-
Cl 9 (Length, Width, Thickness & Mass)	-
Cl 10 (Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-
4,4.1,4.2 (CARBON)	-
4,4.1,4.2 (SULPHUR)	-
4,4.1,4.2 (PHOSPHURS)	-
4,4.1,4.2 (MANGANESE)	-
4,4.1,4.2 (SILICON)	-
4,4.1,4.2 (ALUMINIUM)	-
4,4.1,4.2 (NITROGEN)	-

Partial

-
-

685

IS 5143 (1988)

Specification for adjustable axillary crutches (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Shape & Dimension)	-
4.1 (Workmanship & Finish)	-
4.1 (Workmanship & Finish)	-
4.2 (Workmanship & Finish)	-
5.1.1 (Strength Test- Cl. 5.1.1 to 5.1.3)	-
5.1.2 (Strength Test- Cl. 5.1.1 to 5.1.3)	-
5.1.3 (Strength Test- Cl. 5.1.1 to 5.1.3)	-
5.2 (Drop Test- As per Cl. 5.2)	-

Complete

-
-

686

IS 14806 (2000)

Azospirillum inoculants

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

687

IS 1253 (1992)

Aluminium for use in iron and steel manufacture - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 ,Table 1 (Chemical composition)	-

Partial

-
-

688

IS 2567 (1978)

Specification for malathion emulsifiable concentrates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point (Abel))	-
2.2.4 (Emulsion Stability)	-
2.3.1 (Malathion content)	-
2.3.2 (Acidity (as H2SO4), )	-

Complete

-
-

689

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Sulphur -IS 228 or method specified in relevant ISO standard)	-
Cl.4 (Phosphorus -IS 228 or method specified in relevant ISO standard)	-

Partial

-
-

690

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Covers and Frames)	-
5.1.2 (The rise of the chequer)	-
5.2 and Fig.1 (Key Holes and Keys)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - fd)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - S)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-
8 (COATING - At 63˚C)	-
8 (COATING - At 0˚C)	-
10 and Table 3 (LOAD TEST)	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

No Record Found