BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

631

IS 11569 (1986)

Specification for cervical collar

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.6 (Reinforcement Material)	-
3 (Shape and Dimensions ,Fig 1)	-
3 (1)L)	-
3 (2)L2)	-
3 (3)L3)	-
4 (Workmanship and Finish)	-

Partial

-
-

632

IS 4454 : Part 4 (2001)

Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

633

IS 4398 (1994)

Carbon - Chromium steel for the manufacture of balls, rollers and bearing races - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

634

IS 10243 (1993)

2,4 - D ethyl ester EC- Specificationn (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 (Identity Test)	-
3.4.1 (Cold Test)	-
3.4.2 (Flash Point (Abel))	-
3.4.3 (Emulsion Stability)	-
3.5.1 (2,4-D Ethyl Ester EC content)	-
3.5.2 (Fee 2,4-D)	-

Complete

-
-

635

IS 4397 (1999)

Cold - Rolled carbon steel strips for ball and roller bearing cages retainers - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

636

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

637

IS 4223 (1975)

Steel Wire For Umbrella Ribs

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Sulphur- Appropriate parts of IS 228.)	-
Cl 6.1 (Phosphorus- Appropriate parts of IS 228.)	-

Partial

-
-

638

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6.1, Table-1 (Sulphur)	-
Clause 6.1, Table-1 (Phosphorus)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
14 (Marking)	-
14 (a) (Marking)	-
14 (b) (Marking)	-
14 (c) (Marking)	-
14 (d) (Marking)	-
14 (e) (Marking)	-
14 (f) (Marking)	-
14 (g) (Marking)	-
14.2 (Marking)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
9.3 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as per IS 10810(Part- 42)))	-

Complete

-
-

639

IS 11646 : Part 2 (1986)

Specification for cane for visually handicapped: Part 2 folding type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (. Shape and Dimensions - As shown in Fig. 1.)	-
3.1 (Shaft/Tube)	-
3.2 (Grip)	-
3.3 (Tip)	-
3.4 (Coating)	-
3.5 (Inner Element)	-
2 (. Shape and Dimensions - As shown in Fig. 1.)	-
4.2 (GripThe grip may preferably be made of rubber compound. It may be moulded as shown in Fig. 1. The moulded grip shall have broader end at the top and gradually tapering at the lower end. The grip shall have flat surface in one bf the segment and the remaining portion may have a few ( 2 or 3 ) serrations for better grip. The weight of the grip shall be 70 to 90 g and length 175 to 225 mm. The grip shall be fixed on one end of the shaft with a strong adhesive. The hollowness may be filled in with a plastic button peg. The grip may have an elastic loop for handle at the top of)	-
4.1 (Shaft shall be made of tube of high tensile strength and ductility. The wall thickness of the tu-bes shall be minimum of 1 mm and outside~diameter of the tube at the centre shall be 12’5 mm minimum. The total length of the cane shall vary between 1 000 and 1 450 mm in steps of 50 mm.There may be 2 to 4 shafts which make it foldable)	-
4.3 (Ths tip may be made from suitable plastics as applicable to plastics for gear specified in IS : 7078-1973 ‘Specification for plastics used in instrument industry’ or any other material having property of good auditory impulse. The length of the tip outside the cane shall be 30 to 50 mm. The tip may have a peg hole at one end which shall be fixed into the other end of the shaft by either inserting or screwing it into the tube. The diameter of the tip shall be 12’5 mm minimum, and maybe half round at the bottom.)	-
4.4 ( Joints - The joints shall be such that it shall be easily fittable after disassembling. The joints may~be of taper type or peg type. In case of taper joint one end of the shaft is tapering and the other is done shaped. In case of peg type joint, either one end of the shaft is reduced in diameter by turning or a peg button is tightly fixed in the shaft to enable it to be fitted it in the female end of the shaft. The male and female parts shall fit into each other firmly (see Fig. 3 ). The shaft shall remain attached to when a single or double elastic cord is passed through. The elastic cord shall be fixed at the grip and the other end at the peg hold at the tip.)	-
5 (. Workmanship and Finish)	-
6.1 ( Endurance Test)	-

Complete

-
-

640

IS 8708 (2006)

Mancozeb wettable powder - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Sieving Requirement)	-
3.2.3 (Suspensibility)	-
3.2.4 (Wettability)	-
3.3.1 (Mancozeb Content)	-
3.3.2 (Zinc Content)	-
3.3.3 (Manganese Content)	-

Partial

-
-

641

IS 3885 : Part 2 (1992)

Steel for the manufacture of laminated springs (Railway Rollingstock): Part 2 rib and groove sections (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

642

IS 3885 : Part 1 (1992)

Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

643

IS 3829 : Part 3 (1985)

Specification for steam sterilizers: Part 3 pressure sterilizers, vertical cylindrical type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Nitrogen- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Nickel- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Chromium- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Titanium- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Niobium- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Copper- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (As per IS 513- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (As per IS 737- Relevant parts of IS 504 or any other established instrumental/Chemicall method)	-
5.1 (As per IS 306 or IS 318- Relevant parts of IS 4027 or any other established instrumental/Chemicall method)	-
4.1 (Shape)	-
4.2 (Size)	-
6.1 (as per Cl. 6.1)	-
6.1.2 (Shell)	-
6.1.3 (as per Cl. 6.1.3)	-
6.2 (Lid)	-
6.3 (Lid Gasket)	-
7.1.2 (Safety Valve- Cl. 7.1.2)	-
7.1.3 (as per Cl. 7.1.3)	-
7.1.4 (as per Cl. 7.1.4)	-
8.1 (Hydrostatic Test- as per Cl 8.1.1)	-

Partial

-
-

644

IS 9471 : Part 6 (2000)

Modular lower limb orthotic components part 6 orthotic hip joint (Joint Unit, Hip Drop Lock) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Shape and Dimensions)	-
4.2 (Joint Hip Lower)	-
5.1 (Workmanship and Finish)	-
6 (Functional Requirements)	-
7 (Bend Test)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-

Complete

-
-

645

IS 9471 : Part 5 (1980)

Specification for modular lower limb orthotic components: Part 5 joint unit, knee

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Dimensions. L(±0.5))	-
3.2 (Overall Dimensions. Fig. 1)	-
3.3 (In the case of free motion, limited motion and foot drop ankle joint unit, the inside (medical) joints shall be contoured to 15 f l”, as shown in Fig. 2 and the outside ( lateral) joints shall be straight, mm)	-
3.4 (Depth of Slot)	-
3.5 (A rivet of minimum 4 mm diameter shall be used)	-
4.4 (The rivet shall be manufactured from a suitable aluminum alloy.)	-
5.1 (Workmanship and Finish)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-

Partial

-
-

646

IS 3626 (2001)

Locked coil winding ropes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3-Table-1 (Carbon - IS 1835)	-
5.3-Table-1 (Sulphur - IS 1835)	-
5.3-Table-1 (Phosphorur - IS 1835)	-
5.3-Table-1 (Manganese - IS 1835)	-

Partial

-
-

647

IS 16145 (2013)

Fipronil suspension concentrate (SC) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.7 (pH of Suspension)	-
3.3.2 (Acidity/Alkalinity)	-

Partial

-
-

648

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
9.3 (Guided bend test(For SAW Pipes))	-
10 (Hydaulic pressure test)	-
11.1, Table 5. (Outside Diameter (OD))	-
11.1, Table 5. (Thickness)	-
12.3.3 (Ovality)	-
12.5 (Strightness)	-
14.1 (Visual inspection, Appearance and Workmanship)	-
14.2 (Visual inspection, Appearance and Workmanship)	-
14.3 (Visual inspection, Appearance and Workmanship)	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD))	-
14.4 (Visual inspection, Appearance and Workmanship-Dent Length)	-
8.1 (CE)	-

Partial

-
-

649

IS 9471 : Part 4 (1980)

Specification for modular lower limb orthotic components: Part 4 joint unit, ankle

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Dimensions. L(±0.5))	-
3.2 (Overall Dimensions. Fig. 1)	-
3.3 (In the case of free motion, limited motion and foot drop ankle joint unit, the inside (medical) joints shall be contoured to 15 f l”, as shown in Fig. 2 and the outside ( lateral) joints shall be straight, mm)	-
3.4 (Depth of Slot)	-
3.4.1 (Free motion (Type 1 ))	-
3.4.2 (Limited motion ( Type 2))	-
3.4.3 (Foot drop ( Type 3))	-
3.4.4 (Double acfion ( Type 4 ))	-
3.5 (Screw shall conform to designation M5 A 10 of IS : 6761-1972 ‘Specification for countersunk head screws with hexagon socket ‘)	-
4.6 (6 The rivet shall be manufactured from a suitable aluminium alloy.)	-
5.1 ( Workmanship and Finish)	-
Cl.4.1 of IS 9471(Part-4) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-4) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-4) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-4) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-4) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-

Complete

-
-

650

IS 16240 (2015)

Reverse osmosis (RO) based point-of-use (POU) water treatment system - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 Cl.6.3.3 and Cl.6.3.4 (E.coli (IS 10500))	-

Partial

-
-

651

IS 3431 (1982)

Specification for steel for the manufacture of volute helical and laminated springs for automotive suspension (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1, 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

652

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Tables 2 to 9 (3) (Length A)	-
5.1 Tables 2 to 9 (4) (Breadth B)	-
5.1 Tables 2 to 9 (4) (Breadth B1)	-
5.1 Tables 2 to 9 (4) (Breadth B2)	-
5.1 Tables 2 to 9 (5) (Thickness of Flap C)	-
5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D)	-
6.4.2 (X)	-
6.4.2 (Y)	-
6.4.2 (Z)	-
6.1 (General)	-
5.1 Tables 2 to 9 (7) (Number of Knuckles)	-
5.1 Tables 2 to 9 (8) (Number of Screw Holes)	-
6.2.1 (Knuckles)	-
6.3 (Pins)	-
6.4 (Screw Holes)	-
6.4.2 (Position of Holes)	-
7 (Finish)	-
TABLE-1 (Clause-4) ( CARBON)	-
TABLE-1 (Clause-4) (SULPHUR)	-
TABLE-1 (Clause-4) (PHOSPHURS)	-
TABLE-1 (Clause-4) (MANGANESE)	-
TABLE-1 (Clause-4) (SILICON)	-
TABLE-1 (Clause-4) ( ALUMINIUM)	-
TABLE-1 (Clause-4) (NITROGEN)	-

Partial

-
-

653

IS 9471 : Part 3 (1980)

Specification for modular lower limb orthotic components: Part 3 stirrup plates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Shape and Dimensions. Size: 1. L ± 3)	-
2 (Shape and Dimensions. Size: 1. W1 ± 3)	-
2 (Shape and Dimensions. Size: 1. W2 ± 2)	-
2 (Shape and Dimensions. Size: 1. W+0.33-0)	-
3.1 (Thickness)	-
4.1 (Fabrication)	-
5 (Workmanship and Finish)	-
Cl.3.1 of IS 9471(Part-3) & IS 1079 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.1 of IS 9471(Part-3) & IS 1079 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.1 of IS 9471(Part-3) & IS 1079 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.1 of IS 9471(Part-3) & IS 1079 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.1 of IS 9471(Part-3) & IS 1079 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.2 of IS 9471(Part-3) & IS 1079 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.1 of IS 9471(Part-3) & IS 1079 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.2 of IS 9471(Part-3) & IS 1079 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.2 of IS 9471(Part-3) & IS 1079 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.3.2 of IS 9471(Part-3) & IS 1079 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-

Complete

-
-

654

IS 3319 (1995)

Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5,5.1 & 5.2; Table 1 (Shape and dimensions)	-
6,6.2 (Workmanship and Finish)	-
9.1 ( Visual Examination)	-
9.2 ( Performance Test)	-
Clause -4, 4.1 ( CARBON)	-
Clause -4, 4.1 (SULPHUR)	-
Clause -4, 4.1 (PHOSPHURS)	-
Clause -4, 4.1 (MANGANESE)	-
Clause -4, 4.1 (SILICON)	-
Clause -4, 4.1 ( ALUMINIUM)	-
Clause -4, 4.1 (NITROGEN)	-
Clause -4, 4.1 (Nickel)	-
Clause -4, 4.1 (Chromium)	-
Clause -4, 4.1 (Molybdenum)	-
Clause -4, 4.1 (NIOBIUM)	-
Clause -4, 4.1 (VANADIUM)	-
Clause -4, 4.1 (TITANIUM)	-

Partial

-
-

655

IS 3312 (1984)

steel shelving cabinets (adjustable type) -Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

656

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.3 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.5 (Abnormal Operation, IS 302-1)	-
19.5 (Abnormal Operation, IS 302-1)	-
19.7 (Abnormal Operation)	-
19.9 (Abnormal Operation)	-
19.1 (Abnormal Operation)	-
19.101 (Abnormal Operation)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
21.101 (Mechanical Strength, IS 302-2-3)	-
22.101 (Construction)	-
22.102 (Construction)	-
22.103 (Construction)	-
22.104 (Construction)	-
22.105 (Construction)	-
22.106 (Construction)	-
22.107 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.4 (Components, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
30.2 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-
32 (Radiation, Toxicity and similar Hazard IS 302-1)	-

Complete

-
-

657

IS 9471 : Part 2 (1980)

Specification for modular lower limb orthotic components: Part 2 stirrups, split

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Shap e and Dimension s)	-
3.1 (Shape)	-
3.2 (Overall Dimensions)	-
3.3 (Dimensions of Lobes)	-
3..3.1 (Free motion ( Type 1 ))	-
3.3.2 (Limited motion (Type 2))	-
3.3.3 (Foot drop ( Type 3 ))	-
3.3.4 (Double action ( Type 4 ))	-
4 (Finished Thickness of components)	-
5 (Workmanship and Finish)	-
Cl.4 of IS 9471 & IS 1079 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4 of IS 9471 & IS 1079 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4 of IS 9471 & IS 1079 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4 of IS 9471 & IS 1079 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4 of IS 9471 & IS 1079 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl. 4.1 of IS 9471(Part-2) & 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl. 4.1 of IS 9471(Part-2) & 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl. 4.1 of IS 9471(Part-2) & 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl. 4.1 of IS 9471(Part-2) & 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl. 4.1 of IS 9471(Part-2) & 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-

Complete

-
-

658

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Phase/Street Lighting conductor)	-
4.2 (Messenger (Neutral Conductor or Otherwise))	-
5.1 (Insulation)	-
6.1 (Flexibility class)	-
6.2 (Compactness)	-
6.2 (No of strands)	-
6.2 (Surface)	-
6.3 (Protective barrier)	-
6.4 (size of street lighting conductor)	-
6.5 (Size of messenger conductor )	-
6.6 (Joints in messenger conductor )	-
6.6 (Direction of outer layer)	-
7.1 (Insulation)	-
7.2 ( Thickness of insulation)	-
7.4 (Aplication of the insulation )	-
7.5 (Colour of the insulation )	-
8.1 (Core identification)	-
8.2 (Core identification)	-
9.1 (Assembly (Laying up))	-
9.2 (Assembly (Laying up))	-
9.3 (Direction of lay)	-
10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-
10.1 a) ii) (Wrapping test - 10810: Part 3)	-
10.1 a) iii) (Resistance test - IS10810: Part 5)	-
10.1 a) i) (Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-
10.1 a) ii) (Wrapping test - 10810: Part 3)	-
10.1 a) iii) (Resistance test - IS10810: Part 5)	-
10.1 b) i) (Test on messenger conductor: Breaking load - IS 10810: Part 2)	-
10.1 b) ii) (Test on messenger conductor: Elongation test - Cl 11.3)	-
10.1 b) iii) (Test on messenger conductor: Resistance test - IS 10810: Part 5)	-
10.1 c) i) (Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-
10.1 c) i) (Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-
10.1 c) ii) (Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-
10.1 c) ii) (Ageing in air oven : Elongation variation- IS 10810: Part 11)	-
10.1 c) iii) (Hot set test: Elongation under load - IS 10810: Part 30)	-
10.1 c) iii) (Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-
10.1 c) iv) (Shrinkage test : Shrinkage - 10810:Part 12)	-
10.1 c) iv) (Shrinkage test : Crack Observed - 10810:Part 12)	-
10.1 c) v) (Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-
10.1 d) i) (Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-
10.1 d) i) (Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-
10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-
10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-
10.1 f) (Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-
10.1 f) (Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-
10.1 g) (High voltage test - IS10810:Part 45)	-

Partial

-
-

659

IS 8498 (2013)

Temephos, emulsifiable concentrate (EC) - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.2 (Acidity (as H2SO4), )	-

Partial

-
-

660

IS 3195 (1992)

Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3, 6.1, 6.2 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3, 6.1, 6.2 & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
7 (Hardness)	-
10 (Freedom from defects)	-
11 ( DIMENSIONS AND TOLERANCES)	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

No Record Found