BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

691

IS 2142 (1992)

Bromine, technical - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1 (Description)	-
Cl. 3.2 Table 1 Sr, no. i) (Bromine)	-
Cl. 3.2 Table 1 Sr, no.ii) (Chlorine)	-
Cl. 3.2 Table 1 Sr, no.iii) (Non-volatile matter)	-
Cl. 3.2 Table 1 Sr, no.iv) (Iodine (as I))	-
Cl. 3.2 Table 1 Sr, no.iii) (Sulphate as SO4))	-

Complete

-
-

692

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

693

IS 14724 (1999)

Water purifiers with Ultra - Violet disinfection - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2.2.3 (Test for Microbiology - Annex A)	-
Cl 3 (Workmanship)	-
Cl 5 (Power Supply, Maximum Rate of Flow, Electrical Safety, Materials of Construction, Safety Against UV Exposure, Indicating Lights & In-Bullt Protections and Ease of Operation)	-
Cl 6 (Leakage-Tightness & Verification of Guarantees of Performance)	-
Cl 5 (Power Supply, Maximum Rate of Flow, Electrical Safety, Materials of Construction, Safety Against UV Exposure, Indicating Lights & In-Bullt Protections and Ease of Operation)	-

Partial

-
-

694

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-
7.1, 7.2 (copper)	-
7.1, 7.2 (Vanadium)	-
7.1, 7.2 (phosphorus)	-
7.1, 7.2 (sulphur)	-
7.1, 7.2 (manganese)	-
7.1, 7.2 (silicon )	-
7.1, 7.2 (carbon)	-
7.1, 7.2 (Chromium)	-
7.1, 7.2 (nitrogen)	-
7.1, 7.2 (micro alloy)	-
7.1, 7.2 (cu + cr+ni)	-
7.1, 7.2 (sulphur + phosphorus)	-

Partial

-
-

695

IS 1832 (1978)

Specification for malathion, technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2 .Table 1.i (Malathion Content)	-
2.2 .Table 1.iii (Acidity (as H2SO4))	-
2.2 .Table 1.v (Specific Gravity at 25°C)	-

Partial

-
-

696

IS 14542 (1998)

Partly skimmed milk powder specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.6.1 (Bacterial Count (IS 5402))	-
Cl 6.6.2 (Coliform Count ((IS 5402))	-

Complete

-
-

697

IS 1827 (1989)

Pesticides - Dimethyl amine SL salts of 2, 4 - D - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.4. Table 1. iii (Alkalinity)	-
3.1 (Constituents)	-
3.3 (Identity Test)	-
3.4. Table 1. ii (Melting Point of Extracted Acid)	-
3.4. Table 1. i ( Acid Content)	-

Complete

-
-

698

IS 13422 (1992)

Disposable surgical rubber gloves specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4 (Sterility)	-

Partial

-
-

699

IS 3748 (1990)

Tool and die steels - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10 (Dimensions and Tolerances, mm)	-
9.1 (Hardness , max-IS 1500 )	-
6 (Freedom from defects)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 7.1, 7.2, 12.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

700

IS 1824 (1978)

Specification for insecticidal space spray

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1.1 (Description)	-
2.3 (Flash Point)	-
2.2 (Active Ingredient Content - Pyrethrins)	-
2.2 (Active Ingredient Content - Malathion)	-
2.1.2 (Identity)	-

Partial

-
-

701

IS 12299 (1998)

Dairy whitener - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5.1 (Bacterial Count)	-
5.5.2 (Coliform Count)	-
5.5.2 (E Coli)	-
5.5.2 (Staphylococcus aureus)	-
5.5.3 (Salmonella)	-
5.6 Table 1 i) (Moisture)	-
5.6 Table 1 ii) (Milk Solids (non-fat))	-
5.6 Table 1 iii) (Insolubility Index)	-
5.6 Table 1 iv) (Total Ash (on dry basis))	-
5.6 Table 1 v) (Milk Fat)	-
5.6 Table 1 vi) (Acid Insoluble ash)	-
5.3 (Flavour and Taste)	-
4 (Description)	-

Complete

-
-

702

IS 1488 (1989)

Pesticides - 2, 4 - D sodium salt, technical - Specification

Technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.3 & 7.1 Table i (Acid content. ( calculated as 2, 4-dichlorophenoxy acetic acid. 2, 4.D))	-
3.2.3 & 7.1 Table ii (Water insoluble matter)	-
3.2.3 & 7.1 Table v (Loss on drying at 105°C)	-

Partial

-
-

703

IS 12176 (1987)

Specification for sweetened ultra high temperature (UHT) treated condensed milk

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.10.1 (Bacterial spores ( plate count ))	-
4.1.10.2 (Coliform count)	-
4.1.10.3 (Coagulase positive Staphylococcus aureus)	-

Partial

-
-

704

IS 8183 (1993)

Bonded mineral wool - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.10.1 (Resistance to Micro-organisms (Optional))	-

Partial

-
-

705

IS 2404 (1993)

Malt extract - Specification (Second Revision)

- View breakup
Rs 6600/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2 (i) IS 5402:1969 (Total bacterial count)	-
Table 2 (ii)IS no 5401 (Coliform bacteria)	-
Table 2 (iii) IS no 5403 ( Yeast count, per g)	-
Table 2 (iv) IS 5403 (Mould count, per g,)	-

Complete

-
-

706

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7.3.1 (Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-
Cl7.3.2 (Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-
Cl 5 (Absorbent Capacity, Regular )	-
Cl 5 (Absorbent Capacity, Large)	-
Cl 5 (Absorbent Capacity, Extra Large)	-
Cl 5 (SIZES, XXL)	-
Cl 7.1 (pH Value, IS 1390 (cold method) for all sizes)	-
Cl 7.2 (Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-
Cl 5 (SIZES, Large)	-
Cl 5 (SIZES, Extra Large)	-
Cl 5 (SIZES, Regular )	-

Partial

-
-

707

IS 1251 (1988)

Specification for zinc phosphide, technical

Technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.3 (Freedom from sulphides)	-
2.2 Table 2 i (Zinc Phosphide (Zn3P2))	-
2.2 Table 2 ii (Zinc Content)	-
2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve)	-
2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve)	-

Complete

-
-

708

IS 261 (1982)

Specification for copper sulphate (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1(i) Table 1 (Copper, Tech, A-2)	-
1(i) Table 1 (Copper, Pure, A-2)	-
1(ii) Table 1 (Matter insoluble in water, Tech, A-3)	-
1(ii) Table 1 (Matter insoluble in water, Pure, A-3)	-
1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Pure, A-4)	-
1(iv) Table 1 (pH value, Tech, A-5)	-
1(iv) Table 1 (pH value, Pure, A-5)	-
1(v) Table 1 (Chloride ( as Cl ), Tech, A-6)	-
1(v) Table 1 (Chloride ( as Cl ), Pure, A-6)	-
1(vi) Table 1 (Arsenic ( as As2O3 ), Tech, A-7)	-
1(vi) Table 1 (Arsenic ( as As2O3 ), Pure, A-7)	-
1(vii) Table 1 (Lead and zinc, Tech, A-8)	-
1(vii) Table 1 (Lead and zinc, Pure, A-8)	-
Cl 3.1 (Description, Tech and Pure)	-

Complete

-
-

709

IS 1806 (2018)

Malted milk foods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3-Table 1- ix (Bacterial count)	-
4.3-Table 1- x (Coliform count)	-
4.3-Table 1- xi (E. coli)	-
4.3-Table 1- xii (Yeast and mould count)	-
4.3-Table 1- xiii (Salmonella)	-
4.3-Table 1- xiv (Shigella)	-
4.3-Table 1- xv (Vibrio cholerae )	-
4.3-Table 1- xv ( V. parahaemolyticus)	-
4.3-Table 1- xvi (Faecal streptococci )	-
4.3-Table 1- xvi ( Staphylococcusaureas)	-

Complete

-
-

710

IS 10758 (1983)

Specification for de - Odourizing - Cum - Disinfectant fluids

- View breakup
(updated on 09.09.2016)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.5 (Flash point(abel))	-
Cl. 3.3 (Stability after dilution(with artificial hard water))	-
Cl. 2.1 (Germicidal Value)	-
Nil (Staphylococcal coe.)	-

Complete

-
-

711

IS 1061 (2017)

Disinfectant fluids, phenolic type - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Stability after Dilution)	-
4.3/3.2 (Germicidal Value)	-
4.3/3.3 (Germicidal Value)	-
4.3/3.4 (Germicidal Value)	-
4.3/3.5 (Germicidal Value)	-
4.3/3.5 (Germicidal Value)	-
4.5 (Stability on Storage)	-
4.3/3.5 (Germicidal Value)	-
4.6 (Detection of Phenolic Compounds)	-
4.4 (Mercury Compounds)	-
4.1.1 (Composition and Description)	-
4.1.2 (Composition and Description)	-
4.3/3.2 (Germicidal Value)	-

Partial

-
-

712

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1 (Dimension of Pipes: Mean outside Diameter, dem)	-
6.1,6.1.1 IS 12235 (Part 1) Table 1 (Outside Diameter at any point, de)	-
6.1.2 IS 4985 Table 2 (Wall Thickness, e )	-
6.1.4, Table 3 (ii) Min. depth of engagement, A. )	-
6.1.4, Table 4 (ii) Length of Solvent Cement socket, l2 )	-
7.1 (Appearance:- )	-
7.2 (Colour )	-
7.3 IS 1223S ( Part 2) (Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-
7.4 IS 1223S ( Part 5) (Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-

Partial

-
-

713

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Colour)	-
6 (Dimensions of pipes)	-
7 (Visual Appearance)	-
8.2 (Reversion)	-

Partial

-
-

714

IS 11536 (2007)

Processed - Cereal based complementary foods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.8.1 ( Bacterial Count)	-
5.8.2 (Coliform Count)	-
5.8.3 (Yeast and Mould count)	-
5.8.4 (Salmonella)	-
5.8.4 (Shigella)	-
5.8.5 (Eseherichia coii)	-
5.8.6 (Staphylococcus aureus)	-
5.1 (Aflatoxin content)	-
5.9 Table 1 i (Moisture)	-
4 (Description)	-
5.7 (Flavour and odour)	-
5.9 Table 1 i (Moisture)	-
5.9 Table 1 ii (Total protein)	-
5.9 Table 1 iii (Total Carbohydrates)	-
5.9 Table 1 iv (Total Ash)	-
5.9 (Ash Insoluble in dilute HCl Acid)	-
5.9 Table 1 v (Ash Insoluble in dilute Hydrochloric Acid)	-
5.9 (Iron)	-
5.9 (Vitamin A (as Retinol))	-
5.9 (Vitamin C)	-
5.9 (Added Vitamin D)	-
5.9 (Thiamine(as HCl))	-
5.9 (Riboflavin)	-
5.9 (Thiamine(as HCl))	-
5.9 (Folic Acid)	-
5.9 (Crude Fibre(on dry basis))	-
5.9 (Zinc )	-
5.9 (Copper)	-
5.9 (Arsenic)	-
5.9 (Tin)	-
5.9 (Cadmium)	-

Partial

-
-

715

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3.2 IS 13360 (Part 3/See 1) (Density)	-
7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes: Mean outside Diameter)	-
7.1.2 IS 12235 (Part 1) Table 2 (Wall Thickness )	-
9.1 (Visual Appearance)	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2) (Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-
9.5 IS 12235(Part 2) (Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-
9.6 IS 12235(Part 14) (Density)	-
10.5 IS 12235(Part 13) (Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-

Partial

-
-

716

IS 781 (1984)

Specification for cast copper alloy screw down bib taps and stop valves for water services (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1, Table-1 (Csat Brass LCB-1 of IS 292 1983,Ingots, Cu + Ni)	-
Clause 4.1, Table-1 (Cast Brass Grade DCB - 2 of IS 1264 : 1981, Die Casting, Cu)	-
Clause 4.1, Table-1 (Leaded In Tin Bronze ,LTB-2 of IS 318, Sn)	-
Clause 4.1, Table-1 (Brass, Tyape 1 half Hard of IS 319 : 2007, Grade -1 , Cu)	-
Clause 4.1, Table-1 (Grade HT 1 of IS 320 : 1980, Copper + incidental Nickel)	-
Clause 4.1, Table-1 (Grade FHTB 1 of IS 6912 : 2005, Cu)	-
Clause 4.1, Table-1 (Grade HT 1 of IS 320 : 1980, Total other elements )	-
Cl 3 (Nominal Size)	-
Cl 5 (Dimensions & Tolerances)	-
Cl 6.1 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 6.3 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 6.4 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 6.5 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 6.6 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 6.7 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 6.8 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 6.11 (CONSTRUCTION AND WORKMANSHIP)	-
Cl 7 (MINIMUM MASS)	-
Cl 8 (Finish)	-
Cl 9 (Testing)	-

Complete

-
-

717

IS 8360 : Part 1 (1977)

fabricated high density polyethylene (HDPE) fittings for potable water supplies: Part 1 General requirements

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (DIMENSIONS OF FlTTINGS)	-
4.2 (DIMENSIONS OF FlTTINGS)	-

Partial

-
-

718

IS 8088 (2019)

Tricycle, hand propelled ? specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 & Table-1 (Overall length)	-
4.1 & Table-1 (Overall width)	-
4.1 & Table-1 (Overall height)	-
4.1 & Table-1 (Width of foot rest)	-
4.1 & Table-1 (Length of foot rest)	-
4.1 & Table-1 (Clearance of foot rest from ground)	-
4.1 & Table-1 (Arm rest height from seat)	-
4.1 & Table-1 (Seat length)	-
4.1 & Table-1 (Seat width)	-
4.1 & Table-1 (Back height from seat)	-
4.1 & Table-1 (Length of steering handle)	-
4.1 & Table-1 (Height of rear wheel supporting frame)	-
4.1 & Table-1 (Leverage of steering handle)	-
Cl.6.3 of IS 8088 & IS 2414 (Tyres and Tubes)	-
Cl.6.4 of IS 8088 & IS 624 (Wheel Rims)	-
6.5 (Mudguards)	-
6.6 (Brakes)	-
6.7 (Sprocket and Free Wheel)	-
6.8 (Front Wheel Hub)	-
6.9 (Rear Wheel Hub)	-
6.11 (Chain Cover)	-
6.12 (Armrests)	-
6.13 (Tool Box)	-
Cl.6.14 of IS 8088 & IS 6799 (Lock)	-
6.15 (Hood)	-
6.18 (Accessories)	-
8.1 (Road test)	-
8.2 (Manoeuvrability)	-
8.3 (Static Load Test)	-
8.5 (Test for Finish)	-
5.1 of IS 8088 & Cl.5 of IS 2039 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
5.4.2 of IS 8088 & IS 513(Part-1) (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
5.4.3 of IS 8088 & IS 277 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
5.4.3 of IS 8088 & IS 513(Part-1) (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.5.5 of IS 8088 & IS 4454(Part-1) (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
5.1 of IS 8088 & Cl.5 of IS 2039 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-

Partial

-
-

719

IS 14433 (2007)

Infant milk substitutes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.9.1 (Bacterial count)	-
6.9.2 (Coliform count)	-
6.9.3 (Escherichia coli)	-
6.9.4 (Staphylococcus Aureus)	-
6.9.5 (Salmonella and shigella)	-
6.9.6 (Yeast and mould count)	-
5 (Description)	-
6.3 (Flavour taste and odour)	-
6.4 (Scorched particles)	-
6.1 (Moisture)	-
6.1 (Milk protein)	-
6.1 (Milk fat)	-
6.1 (Total fat)	-
6.1 (Total ash)	-
6.1 (Acid insoluble ash)	-
6.1 (Insolubility index)	-
6.1 (Solubility)	-
6.1 (Iron)	-
6.1 (Lead)	-
6.1 (Arsenic)	-
6.1 (Tin)	-
6.1 (Cadmium)	-
6.1 (Calcium)	-
6.1 (Phosphorus)	-
6.1 (Iodine)	-
6.1 (Copper)	-
6.1 (Manganese)	-
6.1 (Zinc)	-
6.1 (Sodium)	-
6.1 (Chloride)	-
6.1 (Magnesium)	-
6.1 (Potassium)	-

Partial

-
-

720

IS 778 (1984)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6- Table 1-i) (Brass(Body)-Cl 7 and table 1 of IS 1264)	-
6- Table 1-i) (Leaded tin Bronze(Body)-Cl 3 and table 1 of IS 318)	-
6- Table 1-ii) (Forged Brass(Bonnet or cover)-Cl 8 , table 3 and FLB of IS 6912)	-
6- Table 1-iv) (High-tensile brass( stem) - Cl 4.1 and table 1 of IS 320)	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List