BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

601

IS 6649 (1985)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Chemical Composition- Sulphur)	-
5 (Chemical Composition- Phosphorus)	-

Partial

-
-

602

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
6 (Freedom from defects:)	-
9.1, Table 3 (0.2 Percent Proof Stress, MPa)	-
9.2, Table 3 (Tensile Strength, MPa)	-
9.3, Table 3 (Elongation ,Percent)	-
9.4, Table 3 (Annealed Hardness, HB-IS 1500: Pt 1)	-
9.5, Table 3 (Charpy Impact Test, J-IS 1499)	-
12 (Dimensions & Tolerances, mm-IS 6603)	-
12 (Diameter, mm)	-
12 (Out of Round , mm)	-
12 (Length , mm)	-
12 (Variation in Straightness)	-
Cl. 12 Table 9, 11 & 13 (Square Size)	-
Cl. 12 Table 11,13 & 14 (Thickness of Flat)	-
Cl. 12 Table 11,13 & 14 (Width of Flat)	-
Cl. 12 Table 10 & 13 (Hexagonal Size)	-
Cl. 12 Table 9 (Out of Square)	-
Cl. 12 Table 10 (Maximum Differences in Three Measurements for Hexagons)	-
Cl. 9.3 Table 3 (Bend Test)	-

Partial

-
-

603

IS 15227 (2002)

Deltamethrin ULV - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Flash Point (Abel))	-
3.3.1 (Deltamethrin Content)	-
3.3.2 (Acidity)	-

Complete

-
-

604

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Outer Diameter, Thickness & Mass)	-
Cl 7 (Workmanship)	-
Cl 8 (Workmanship)	-
Cl 9 (Workmanship)	-
Cl 11 (Tensile Test, Flattening Test & Cold Bend Test)	-
Cl 13 (Workmanship)	-
Clause - 5.1, Table-3 ( CARBON)	-
Clause - 5.1, Table-3 (SULPHUR)	-
Clause - 5.1, Table-3 (PHOSPHURS)	-
Clause - 5.1, Table-3 (MANGANESE)	-
Clause - 5.1, Table-3 ( ALUMINIUM)	-
Clause - 5.1, Table-3 (SILICON)	-
Clause - 5.1, Table-3 (NITROGEN)	-
5 AND AS PER IS 10748 (CARBON EQUIVALENT)	-
5 AND AS PER IS 10748 (MICRO ALLOY)	-

Partial

-
-

605

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1,7.2,7.3 Table 1 (Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Others(Nitrogen)-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Nickel-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Chromium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Molybdenum-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Titanium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Niobium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Selenium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.3 (Copper-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Freedom from defects)	-
9 (Hardness)	-
10 (Dimensional Tolerances)	-

Partial

-
-

606

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom from defects , IS 6911)	-
10.1,Table 4&Table 6 (Tensile Test - IS 1608(Pt -1))	-
10.2,Table 4&Table 5 (Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-
10.3 (Bend Test - IS 1599)	-
11,Table 7 (Erichsen cupping test-IS 10175)	-
15 (Surface Finish)	-
17 (Dimension and tolerance)	-
Cl. 7.1 & 7.2 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

607

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1 (Workmanship)	-
Cl 5 & 6 (Diameter)	-
Cl 7 (UTM)	-
Cl 8.3 (Bending To Both Side At 90°, Then Straight)	-
Clause 3.1.1 (Sulphur)	-
Clause 3.1.1 (Phosphorus)	-

Partial

-
-

608

IS 15228 (2002)

Cyfluthrin - Emulsion in water (EW) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.2 (Cold Test)	-
3.3.1 (Cyfluthrin Content)	-
3.3.2 (Acidity)	-
3.2.3 (Dispersion Stability)	-

Complete

-
-

609

IS 6392 (2020)

Steel Pipes Flanges — Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 (Carbon- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Sulphur- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Phosphorous- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Manganese- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Silicon- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Aluminium- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Nickel- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Chromium- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Copper- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Molybdenum- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Vanadium- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Boron- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Tin- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Cr+Ni+Mo- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Cu+ 10% Tin- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Molybdenum+Tungsten- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Total Contents of all the unspecified elements- relevant parts of IS 228 or any other established instrumental/chemical method, )	-
3.1 Table 1 (Tungsten-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Zirconium-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Titanium-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Total content of residual elements as per IS 3038 -relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Nitrogen Content-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Residual Copper-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Carbon Equivalent-relevant parts of IS 228 or any other established instrumental/chemical method,)	-
3.1 Table 1 (Niobium-relevant parts of IS 228 or any other established instrumental/chemical method,)	-

Complete

-
-

610

IS 5651 (1987)

Specification for steels for pneumatic tools (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (Carbon-IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Sulphur-IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Phosphorous-IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Manganese-IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Chromium-IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

611

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1 (UTM)	-
Cl 8.2 (Press)	-
Cl 10 (Galvanising Test)	-
Cl 12 (Workmanship)	-
Cl 13 (Weight)	-
Cl 14 (Length, Width & Thickness)	-
5.1 (carbon)	-
5.1 (sulphur)	-
5.1 (phosphorus)	-
5.1 (manganese)	-
5.1 (silicon )	-
5.1 (aluminium)	-
5.1 (nitrogen)	-
5.1 (micro alloy)	-

Partial

-
-

612

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Workmanship)	-
Cl 6.2 (Diameter & Ovality)	-
Cl 6.2 (Weight)	-
Cl 8.2 (Bend test)	-
Cl 9.3 (Press)	-
Clause -4, 4.1 ( CARBON)	-
Clause -4, 4.1 (SULPHUR)	-
Clause -4, 4.1 (PHOSPHURS)	-
Clause -4, 4.1 (MANGANESE)	-
Clause -4, 4.1 (SILICON)	-
Clause -4, 4.1 ( ALUMINIUM)	-
Clause -4, 4.1 (NITROGEN)	-
Clause -4, 4.1 (Nickel)	-
Clause -4, 4.1 (Chromium)	-
Clause -4, 4.1 (Molybdenum)	-
Clause -4, 4.1 (NIOBIUM)	-
Clause -4, 4.2 (VANADIUM)	-
Clause -4, 4.3 (TITANIUM)	-

Partial

-
-

613

IS 15236 (2002)

Profenofos + cypermethrin emulsifiable concentrate - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.2 (Acidity)	-

Complete

-
-

614

IS 10086 (1982)

Specificaton for moulds for use in tests of cement and concrete

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Construction)	-
Cl 5.3 (Arangement for fastening / Clamping)	-
4.1 (Dimension and tolerances of cylindrical moulds Table 3)	-
4.1 (Dimension and tolerances of beam moulds Table 4)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-

Partial

-
-

615

IS 2365 (2018)

Steel wire suspension ropes for lifts, elevators and hoists - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4, Table 1 to 5 (Diameter)	-
Cl. 5, Table 1 to 5 (Breaking force of rope with fibre core- IS 6594)	-
Cl. 6.2 (Joints)	-
Cl. 6.4 (Mass of Zinc Coating- IS 6745)	-
Cl. 6.4 (Uniformity of zinc coating- IS 2633)	-
Clause-6.4 (CARBON)	-
Clause-6.4 (SULPHUR)	-
Clause-6.4 (PHOSPHURS)	-
Clause-6.4 (MANGANESE)	-
Clause-6.4 (SILICON)	-
Clause-6.4 (ALUMINIUM)	-
Clause-6.4 (NITROGEN)	-

Partial

-
-

616

IS 15240 (2002)

Profenofos emulsifiable concentrate - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 ( Profenofos Content)	-
3.3.2 (Acidity)	-

Complete

-
-

617

IS 455 (2015)

Portland slag cement - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table 1 iv c (Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-
7 Table 1 iv b (Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-
7 Table 1 iv a (Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-
7 Table 1 iii b (Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-
7 Table 1 iii a (Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-
7 Table 1 ii b (Soundness, Autoclave expansion IS 4031(Part 3) )	-
7 Table 1 ii a (Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-
7 Table 1 i (Fineness IS 4031(Part 2))	-
6 - Table - 1 v (Loss on ignition - Cl 6.2 of IS 4032:1985)	-
6 - Table - 1 vi (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 iv (Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 6.8 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-
6 - Table - 1 i (Insoluble residue - Cl 6.9 of IS 4032:1985)	-
6 - Table - 1 vii ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-

Partial

-
-

618

IS 15443 (2004)

Imidacloprid technical - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.i (lmidacloprid Content)	-
3.2.ii (Moisture Content)	-
3.2.iii (Acidity/Alkalinity)	-

Complete

-
-

619

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 7.1 & 7.2 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 7.1 & 7.2 Table 1 (Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
8.2, Table 3 (Tensile Test-1608:Part 1)	-
8.2, Table 3 (Proof Stress, N/mm2)	-
8.2, Table 3 (Tensile Strength, N/mm2)	-
8.2, Table 3 (Elongation, %)	-
8.3 (Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-
8.4 (Bend Test)	-
8.5 (Erichsen Cupping Test)	-
10.1 (Thickness, mm)	-
10.2 (width, mm)	-
10.3 (Length, mm)	-
10.4 (Flatness,mm)	-
11 (Surface Finish)	-

Complete

-
-

620

IS 5517 (1993)

Steels for hardening and tempering - Speicification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Aluminium IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Boron- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, 11.2, 15.1 & Table 2 (Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
13.1&13.2&13.3 (Dimensional tolerances- IS 3739 and is 3469(Pt 1to 3); Tolerance on straightness)	-

Partial

-
-

621

IS 5504 (1997)

Specification for spiral welded pipes (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon)	-
Cl. 5.1 (Sulphur)	-
Cl. 5.1 (Phosphorus)	-
4/4.1 (MANUFACTURE)	-
4/4.2 (MANUFACTURE)	-
4/4.3 (MANUFACTURE)	-
6.1 (Tensile Test)	-
6.2 (Flattening Test)	-
6.3/6.3.1.1 (Submerged Arc Weld Test- Guided bend test)	-
7 (Hydrostatic Test- Pressure)	-
8.1 (Length)	-
8.2 (Dimensions)	-
9/9.1 (Finish)	-
10 (Repair by Welding)	-
11 (Protective coating)	-

Partial

-
-

622

IS 5489 (1975)

Specification for carburizing steels for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1 & 4.2 Table 1 (Carbon- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Phosphorous- Relevant parts of IS 228 )	-
4.1,4.1.1 & 4.2 Table 1 (Manganese- Relevant parts of IS 228 )	-

Partial

-
-

623

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Manufacture - IS 17423)	-
4.1.1 (Manufacture - IS 17423)	-
4.1.1 (Manufacture - IS 17423)	-
4.2 (Manufacture - IS 17423)	-
4.2 (Manufacture - IS 17423)	-
4.2 (Manufacture - IS 17423)	-
4.3 (Manufacture - IS 17423)	-
4.3 (Manufacture - IS 17423)	-
4.4 (Manufacture - IS 17423)	-
4.4 (Manufacture - IS 17423)	-
4.5 (Manufacture - IS 17423)	-
4.6 (Manufacture - IS 17423)	-
5.1 (Workmanship and Finish - IS 17423)	-
5.1 (Workmanship and Finish - IS 17423)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-

Complete

-
-

624

IS 5290 (1993)

Landing valves - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Grade LTB-2 of IS 318 : 1981 (Tin)	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap Designation 4225 of IS 617 : 1975 (copper)	-
Cl. 4.1, valve body, bonnet, stop valve, check nut, instantaneous female outlet and blank cap grade 1 of IS 3444 : 1999 (C)	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972. (C)	-
Cl. 4.2 referes to IS 320: 1980. For grade HT 1 (Copper plus Incidental Ni)	-
Cl. 4.5 referes to IS 6528 : 1972 (Currently 1995). as per cl 7.3 , for Austenitic Steel without Specified Mo (Ti)	-
Cl. 4.1.1 for stainless steel designatton 04Cr17Ni12MO2 conforming to IS 6529 : 1972. (C)	-
5, 5.1 (a) fig-1, type A (Types AND DIMENSIONS)	-
5, 5.1 (b) fig-2, type B (Types AND DIMENSIONS)	-
5.2 (Types AND DIMENSIONS)	-
5.2.1 (Types AND DIMENSIONS)	-
6, 6.1 (Finish)	-
6, 6.2 (Finish)	-
7, 7.1 (7 PERFORMANCE REQUIREMENTS, Water Tightness Test for the Valve)	-
7, 7.2 (hydrostatics pressure tests)	-

Partial

-
-

625

IS 253 (2014)

Specification for common salt (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause -3 for common salt 3.1 ( 3.1.1 ) ( The material shall be crystalline solid, white or pale pink or light grey in colour.)	-
Clause -3 for common salt 3.1 ( 3.1.2 ) Annex-2 (Moisture The material shall contain not more than 6.0 percent by mass of moisture, on as received basis, when tested according to the method given in A-2)	-
Clause-3.2 for dairy salt (3.2.1) (The material shall be crystalline white solid and free from any visible impurities.)	-
Clause-3.2 for dairy salt (3.2.3) Annex -2 (3.2.3 Moisture The material shall contain not more than 0.5 percent by mass of moisture, on as received basis, when tested according to the methods given in A-2.)	-
Table 1 (i) Annex -4 (Water insoluble matter, common)	-
Table 1 (i) Annex -4 (Water insoluble matter, Dairy)	-
Table 1 (ii) Annex-5 (Chloride content (as NaCl)common)	-
Table 1 (ii) Annex-5 (Chloride content (as NaCl), Dairy)	-
Table 1 (iii) Annex-6 ( Matter soluble in water, other than sodium chloride, common)	-
Table 1 (iii) Annex-6 ( Matter soluble in water, other than sodium chloride, Dairy)	-
Table 1 (iv) (Calcium (as Ca), water soluble, percent by mass, common)	-
Table 1 (iv) Annex-7 (Calcium (as Ca), water soluble, percent by mass, Dairy)	-
Table 1 (v) (Magnesium (as Mg), water soluble, percent by mass, common )	-
Table 1 (v) Annex-7 (Magnesium (as Mg), water soluble, percent by mass, Dairy )	-
Table 1 (vi) (Sulphate as SO2 percent by mass, common)	-
Table 1 (vi) Annex-8 (sulphate as SO2 percent by mass, Dairy)	-
Table 1 (vii) Annex-9 (Alkalinity (as Na2CO3), common)	-
Table 1 (vii) Annex-11 (Alkalinity (as Na2CO3), Dairy)	-
Table 1 (viii) (Lead (as Pb), common)	-
Table 1 (viii) (Lead (as Pb),Dairy )	-
Table 1 (ix) (Iron (as Fe), common)	-
Table 1 (ix) (Iron (as Fe), Dairy)	-
Table 1 (x) Annex-11 (x) Arsenic (as As), common)	-
Table 1 (x) Annex-11 (x) Arsenic (as As),Dairy)	-
Table 1 (xi) Annex-12 (Copper (as Cu), common)	-
Table 1 (xi) Annex-12 (Copper (as Cu), Dairy )	-

Complete

-
-

626

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Depth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Width))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections(Thickness))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Weigth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Area of Section))	-
Cl. 10.1, 14.1, 18.1 (Straightness)	-
Cl. 10.2, Fig 1 (Outside dimension (B))	-
Cl. 10.2, Fig 1 (Outside dimension (H))	-
Cl. 10.2, Fig 1 (Outside dimension (T))	-
Cl. 10.4, Fig 2 (Concavity, X1)	-
Cl. 10.4, Fig 2 (Convexity, X2)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.7, Fig 5 (Total twist, V)	-
Cl. 15.2, Table 3 (Tensile Strength- IS 1608)	-
Cl. 15.2, Table 3 (Yield Strength- IS 1608)	-
Cl. 15.2, Table 3 (Elongation- IS 1608)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Random Length)	-
Cl. 14.1 (Weight on individual length)	-
Cl.7.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Complete

-
-

627

IS 15692 (2006)

Hexaconazole, suspension concentrate (SC) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.5 (Wet Sieve Test)	-
3.32 (Acidity/Alkalinity)	-
3.2.2 (Pourability (Rinsed Residue))	-
3.2.3 (Spontaneity of Dispersion)	-
3.2.4 (Suspensibiliy)	-
3.3.1 (Hexaconazole Content)	-
3.2.6 (Persistent Foam)	-

Complete

-
-

628

IS 11708 (1986)

Specification for hand, mechanical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1.1 (Scope)	-
1.2 (Scope)	-
1.3 (Scope)	-
2,Table 1 ( Dimension)	-
3.1 (Light material)	-
3.2 (Material for cable)	-
3.3 ( Durometer hardness of Shore A 60-75 ; Appendix F of IS :9766)	-
3.4 (The functional hand)	-
3.5 (The finger)	-
5.1 (Provisions of adaption)	-
5.4 (Aluminium finger)	-
5.5 (Total weight)	-
6,6.1 (Workmanship &Finish)	-

Partial

-
-

629

IS 4882 (1979)

Specification for low carbon steel wire for rivets for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1,5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

630

IS 15848 (2009)

Zinc sulphate, monohydrate, agricultural grade - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.Table 1.i (Zinc (as Zn))	-
3.2.Table 1.ii (Magnesium (as Mg)	-
3.2.Table 1.iii (Copper (as Cu))	-
3.2.Table 1.iv (Lead (as Pb))	-
3.2.Table 1.v (pH of 5 percent solution)	-
3.2.Table 1.vii (Iron (as Fe))	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List