BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

481

IS 7454 (1991)

Rehabilitation equipment - Wheelchairs, folding, adult size - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 Table 1 (Overall Length)	-
Cl. 5.1 Table 1 (Overall Width, Open)	-
Cl. 5.1 Table 1 (Overall Width, Folded)	-
Cl. 5.1 Table 1 (Overall height)	-
Cl. 5.1 Table 1 (Scat height from floor at the fron)	-
Cl. 5.1 Table 1 (Distance between seat and footrest)	-
Cl. 5.1 Table 1 (Armrest height from seat)	-
Cl. 5.1 Table 1 (Scat depth)	-
Cl. 5.1 Table 1 (Clearance of footrest from floor)	-
Cl. 5.1 Table 1 (Clearance of frame from floor)	-
Cl. 5.1 Table 1 (Wheel diameter)	-
Cl. 5.1 Table 1 (Weight of the wheel chair ( basic model ))	-
Cl. 7.1 (Backrest and Seat)	-
Cl.7.2 (Frame)	-
Cl.7.3 (Footrests and Supports)	-
Cl.7.4 ( Armrests)	-
Cl.7.5 (Hand Rims)	-
Cl.7.6 (Brakes)	-
Cl.7.7 (Castors)	-
Cl.7.8 (Wheels)	-
Cl.7.9 (Clothing Guards)	-
Cl.7.10 (Folding Mechanism)	-
Cl.7.11 (Lubrication)	-
Cl. 8 (Finish)	-
Cl. 9.1 (Test for Wheeling)	-
Cl. 9.3 (Load Test)	-
Cl. 9.4 (Test for Folding)	-

Partial

-
-

482

IS 8951 (2001)

Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Copper- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nickel- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nitrogen- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Cu+Ni+Cr- IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

483

IS 1698 (1994)

Indigo carmine, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1-Table 1- i (Total dye content, corrected for sample dried at 105 ± I°C for 2 h)	-
3.1-Table 1- iii (Water-insoluble matter)	-
3.1-Table 1- iv (Combined ether extracts,)	-
3.1-Table 1- vii (Lead)	-
3.1-Table 1- viii (Arsenic)	-
3.1-Table 1- ix (Heavy Metals)	-
3.2 (Contaminants)	-

Partial

-
-

484

IS 1932 (1986)

Specification for mustard and rape seed oilcake as livestock feed ingredient (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (1 Description - The material shall be free from harmful constituents. The material shall be free from rancidity, adulterants, insect or visible fungus infestation and from fermented, musty or other objectionable odour. It shall be free from extraneous matter including metallic pieces.)	-
Table 1 (i) (Moisture, percent by mass)	-
Table 1 (ii) (Crude protein )	-
Table 1 (iii) (Crude fat or ether extract, percent by mass. Min)	-
Table 1 (iv) (Crude fibre, percent by mass, M)	-
Table 1 (v) (Total ash, percent by mass, Max)	-
Table 1 (vi) (Acid-insoluble ash. percent by mass, Max)	-

Partial

-
-

485

IS 2052 (2009)

Compounded feeds for cattle - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description - The feed shall be free from harmful constituents, metallic pieces and adulterants. The feed shall also be free from fungal growth and insect infestation. And from fermented . musty, rancid or any other objectionable odour)	-
4.3 - Table 1 - i (Moisture - Cl 4 of IS 7874 (Part 1))	-
4.3 - Table 1 - ii (Crude protein (N x 6.25) - Cl 5 of IS 7874 (Part 1))	-
4.3 - Table 1 - iii (Crude fat - Cl 7 of IS 7874 (Part 1))	-
4.3 - Table 1 - iv (Crude fibre - Cl 8 of IS 7874 (Part 1))	-
4.3 - Table 1 - v (Acid insoluble ash - Cl 10 of IS 7874 (Part 1))	-
4.3 - Table 2 - v (Urea - IS 7874 )	-
4.3 - Table 2 - i (Salt (as NaCl) - Cl 4 of IS 7874 (Part 2))	-

Partial

-
-

486

IS 2124 (2000)

Sodium bicarbonate - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Grade)	-
4.1 (Description)	-
4.2 (Table 1 S.no.(i)) (Total Alkalinity (as NaHCO3))	-
4.2 (Table 1 S.no.(i)) (pH )	-
4.2 (Table 1 S.no.(ii)) (Chlorides (as Cl))	-
4.2 (Table 1 S.no.(iii)) (Insoluble matter)	-
4.2 (Table 1 S.no.(iv)) (Sulphates (as SO4))	-
4.2 (Table 1 S.no.(v)) (Iron (as Fe))	-
4.2 (Table 1 S.no.(vii)) (Arsenic (as As))	-
4.2 (Table 1 S.no.(vi)) (Iron (as Fe))	-
4.2 (Table 1 S.no.(viii)) (Ammonium compounds (as NH4))	-
4.2 (Table 1 S.no.(ix)) (Phosphates (as PO4))	-
4.2 (Table 1 S.no.(x)) (Calcium and magnesium (as Ca))	-
4.2 (Table 1 S.no.(xi)) (Copper (as Cu))	-
4.2 (Table 1 S.no.(xii)) (Nitrates (as NO3))	-
4.2 (Table 1 S.no.(xiii)) (Silicates (as SiOz))	-
4.2 (Table 1 S.no.(xiv)) (Potassium (as K))	-
4.2 (Table 1 S.no.(xv)) (Substances reducing iodine)	-

Complete

-
-

487

IS 2557 (1994)

Annatto colour for food products - Specification (First Revision)

- View breakup
Rs..5280/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1 Clause-5.1 SI.no (i) Annex-B (a) Annatto extract in oil, expresaed as bixin, percent by mass , min )	-
Table-1 Clause-5.1 SI.no (i) Annex-B (b) Water-soluble annatto norbixin, percent by mass min)	-
Table-1 Clause-5.1 SI.no (ii) IS-1699 CL-15 (Arsenic mg/kg)	-
Table-1 Clause-5.1 SI.no (iii) IS-1699 CL-15 (Lead mg/kg )	-
Table-1 Clause-5.1 SI.no (ii) IS-1699 CL-15 (Copper mg/kg)	-
Table-1 Clause-5.1 SI.no (iii) IS-1699 CL-18 (Heavy Metals mg/kg)	-

Complete

-
-

488

IS 5295 (1985)

Specification for ethylene glycol (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl No. 3.2 [ Table 1, Sl no.(i) ] Appendix A-2 FibreGrade only (Colour)	-
Cl No. 3.2 [ Table 1, Sl no.(ii) ] Appendix A-2 FibreGrade only (Colour after boiling for 4 hour under total reflux)	-
Cl No. 3.2 [ Table 1, Sl no.(iii) ] Appendix A-3 FibreGrade only (Relative density* at 27/ 27”C)	-
Cl No. 3.2 [ Table 1, Sl no.(vi) ] Appendix A-6 General Grade & Fibre Grade (Acidity ( as acetic acid))	-
Cl No. 3.2 [ Table 1, Sl no.(vii) ] Appendix A- 7 General Grade & Fibre Grade (Ash)	-
Cl No. 3.2 [ Table 1, Sl no.(viii)(a) ] Appendix A-8 Fibre Grade only (Ultra-Violet transmittance in 1 cm cell at: 220 nm)	-
Cl No. 3.2 [ Table 1, Sl no.(viii)(b) ] Appendix A-8 Fibre Grade only (Ultra-Violet transmittance in 1 cm cell at: 275 nm)	-
Cl No. 3.2 [ Table 1, Sl no.(viii)(c) ] Appendix A-8 Fibre Grade only (Ultra-Violet transmittance in 1 cm cell at: 350 nm)	-
Cl No. 3.2 [ Table 1, Sl no.(ix) ] Appendix A- 9 General Grade only ref to Method B ofIS 1448 :( P 11) (Freezing point of equal volumes of material and water)	-
Cl No. 3.2 [ Table 1, Sl no.(x) ] Appendix A-10 Fibre Grade only (Iron Content )	-
Cl No. 3.2 [ Table 1, Sl no.(xi) ] Appendix A-11 Fibre Grade only (Chlorides content ( as Cl ))	-
Cl No. 3.2 [ Table 1, Sl no.(xii) ] Appendix A-12 Fibre Grade only (Diethylene glycol content,)	-

Partial

-
-

489

IS 5346 (1994)

Synthetic food colour - Preparations and mixtures - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.5 (Total dye Content)	-
Clause 4.6 Table 1 (Water InsoIuble matter,)	-
Clause 4.6 Table 1 (Lead (as pb) )	-
Clause 4.6 Table 1 (Arsenic(as As))	-
Clause 4.6 Table 1 (Heavy metals)	-

Partial

-
-

490

IS 1695 (2014)

Sunset yellow, FCF, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1-Table 1- i (Total dye content, corrected for sample dried at 105 ± I°C for 2 h)	-
3.1-Table 1- ii (Loss on drying at 135°C & and Chlorides and sulphates expressed as sodium salt)	-
3.1-Table 1- iii (Water-insoluble matter)	-
3.1-Table 1- iv (Combined ether extracts,)	-
3.1-Table 1- v (Subsidiary dyes: a) lower sulphonated dyes including traces of orange II b)colours other than trisodium 2-hydroxy-1-(4-sulphonatophenyl azo) 2.0 — B-2 of IS 1695 naphthalene-3,6-disulphonate )	-
3.1-Table 1- vi (Dye intermediates, p)	-
3.1-Table 1- vii (Unsulphonated primary aromatic amines)	-
3.1-Table 1- viii (Sudan I (1-(Phenylazo)-2-naphthalenol),)	-
3.1-Table 1-ix (Lead)	-
3.1-Table 1- x (Arsenic)	-
3.1-Table 1-xi (Heavy Metals)	-
3.2 (Contaminants)	-
3.3 (Test for Colour)	-

Complete

-
-

491

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2 (Particle Size)	-
Clause 4.3 Table 1 (Moisture content)	-
Clause 4.3 Table 1 (water insoluble matter)	-
Clause 4.3 Table 1 (Chloride Content(as Nacl))	-
Clause 4.3 Table 1 (Matter soluble in water other than sodium chloride)	-
Clause 4.3 Table 1 (Calcium (as Ca))	-
Clause 4.3 Table 1 (Magnesium (as mg))	-
Clause 4.3 Table 1 (Sulphate (as SO4 ),)	-
Clause 4.3 Table 1 (Iodine content, a) Manufacturers Level )	-
Clause 4.3 Table 1 (Alkalinity (as Na2CO3),)	-
Clause 4.3 Table 1 (Lead as (Pb))	-
Clause 4.3 Table 1 (Arsenic(as As))	-
Clause 4.3 Table 1 (Iron(as Fe))	-
Clause 4.2 (Particle Size)	-
4.4 (Anticaking agents (Potassium Ferrocyanide))	-

Partial

-
-

492

IS 1694 (1994)

Tartrazine, food grade - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1-Table 1- i (Total dye content, corrected for sample dried at 105 ± I°C for 2 h)	-
3.1-Table 1- ii (Loss on drying at 135°C & and Chlorides and sulphates expressed as sodium salt)	-
3.1-Table 1- iii (Water-insoluble matter)	-
3.1-Table 1- iv (Combined ether extracts,)	-
3.1-Table 1- v (Subsidiary dyes)	-
3.1-Table 1- vi (Dye intermediates, p)	-
3.1-Table 1-vii (Lead)	-
3.1-Table 1-xi (Heavy Metals)	-
3.2 (Contaminants)	-

Partial

-
-

493

IS 1397 (2020)

Kraft Paper for Packing and Wrapping — Specification ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Finish)	-
Cl 5.3 (Size)	-
Cl 5.5 Table 1 S.No.i i) (pH, Min)	-
Cl 5.5 Table 1 S.No. iii) (Burst index )	-
Cl 5.5 Table 1 S.No. iv) (Tear index (each direction))	-
Cl 5.5 Table 1 S.No. v) (Tensile index CD)	-
Cl 5.5 Table 1 S.No. v) (Tensile index MD)	-
Cl 5.5 Table 1 S.No. vi) (Folding endurance, CD)	-
Cl 5.5 Table 1 S.No.vii) (Cobb value Front,, 60 sec 27°C)	-
Cl 5.5 Table 1 S.No.vii) (Cobb value Back,, 60 sec 27°C)	-
Cl 5.6 Table 2 S.No.i) (pH)	-
Cl 5.6 Table 2 S.No.ii) (Ash)	-
Cl 5.6 Table 2 S.No.vii) (Alkalinity ( as CaCO3 ),)	-
Cl 5.6 Table 2 S.No.v) (Sulphates ( as Na2SO4 ),)	-
Cl 5.6 Table 2 S.No.vi) (Fatty and/or similar acids)	-
5.4 (Substance)	-
Cl 5.6 Table 2 S.No.iii) (Elongation at break, CD)	-
Cl 5.6 Table 2 S.No.iii) (Elongation at break, MD)	-
5.2, 5.2.1 (Finish (Grade 1) )	-
5.2, 5.2.2 (Finish (Grade 2) )	-
5.2, 5.2.3 (Finish (Grade 3) )	-

Partial

-
-

494

IS 7532 (2018)

Soft soap - Specification (First RevisIon)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 5 ( 5.1) (The material shall be homogeneous translucent mass of jelly-like texture, free from putrescent, fishy or objectionable odour. It applies to soft soap with potassium or sodium base or a mixture of these bases. It does not apply to soaps for medicinal purposes. It may or may not be suitably perfumed subject to agreement between the purchaser and the supplier. It shall be free from foreign matter and visible impurities)	-
5.2 (5.2 The material shall quickly form a satisfactory lather while in use and shall show no sign of any deterioration on storage in original sealed containers under normal conditions for a period of 12 months.)	-
5.3 (The soap shall not become liquid at 32°C, and no liquid shall separate when the soap is maintained at 0°C, for 24 h.)	-
5.4 (Soft soap is liable to lose moisture on keeping. The results obtained for unsaponified and unsaponifiable matter, total free alkali and free caustic alkali by the specific methods of analysis shall, therefore, be recalculated in relation to the specified minimum total fatty matter by means of the equation: Recalculated result = Minimum specified total fatty matter content Actualresult× Actual total fatty matter conten)	-
Table-1 (i) IS.no 286 (Total Fatty Matter ( Type 1 ))	-
Table -1 (i) IS .no 286 (Total Fatty Matter ( Type 2 ))	-
Table-1 (ii) IS.no 286 CL 12 (Unsaponified and Unsaponified matter (Type 1 ))	-
Table1(ii) IS.no 286 CL12 (Unsaponified and Unsaponified matter (Type 2 ))	-
Table-1 (iii) IS.no 286 CL 14 (Rosin acids percent by mass of total fatty matter ( Type 2))	-
Table-1 (iv) IS.no 286 Annex A (Total free alkali ( as K2O ) type 1)	-
Table-1 (iv) IS.no 286 Annex A (Total free alkali ( as K2O ) type 2)	-
Table-1 (v) IS.no 286 CL 6 ( see note ) (Free Caustic alkali ( as K2O) type 1)	-
Table-1 (v) IS.no 286 CL 6 ( see note ) (Free Caustic alkali ( as K2O) type 2)	-

Complete

-
-

495

IS 8776 (1988)

Specification for valve fittings for use with liquefied petroleum gas (LPG) cylinders up to and including 5 - Litre water capacity (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1Sl.No.i (Copper)	-
4.2.1Sl.No.ii (Lead)	-
4.2.1Sl.No.iv (Manganese)	-
4.2.1Sl.No.iii (Iron)	-
4.2.1Sl.No.v (others(inclusive of iron))	-
4.2.1Sl.No.vi (Zinc)	-

Partial

-
-

496

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, 6.2 (carbon)	-
6.1, 6.2 (silicon )	-
6.1, 6.2 (manganese)	-
6.1, 6.2 (sulphur)	-
6.1, 6.2 (vanadium)	-
6.1, 6.2 (molybdenum)	-
6.1, 6.2 (cr + n + mo)	-
6, table 1 (Chemical Composition)	-
6.1, 6.2 (phosphorus)	-
6.1, 6.2 (tin)	-
6.1, 6.2 (boron)	-
6.1, 6.2 (aluminium)	-
6.1, 6.2 (nickel)	-
6.1, 6.2 (cromium)	-
6.1, 6.2 (copper)	-
6.1, 6.2 (molybdenum)	-
6.1, 6.2 (vanadium)	-
6.1, 6.2 (boron)	-
6.1, 6.2 (tin)	-
6.1, 6.2 (cr + n + mo)	-
Cl 7 (Workmanship)	-
Cl 8 (Diameter, Ovality & Weight)	-
Cl 9 (UTM & HBW)	-
Cl 12 (Supplementary Requirements)	-
9.1, table 2 (Tensile Strength)	-
9.1, table 2 (Yield Strength)	-
9.2, table 2 (hardness test)	-
12.2 (Bend Test)	-

Partial

-
-

497

IS 1703 (2000)

Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (CLASSIFICATION)	-
4 (NOMINAL SIZES)	-
6 (MANUFACTURE AND WORKMANSHIP)	-
6.1 (Castings)	-
6.2 (Machining)	-
7.2 and Fig.1 (CONSTRUCTION)	-
7.2 and Fig.1 (CONSTRUCTION)	-
7.3 and Fig.1 (CONSTRUCTION)	-
7.4 (Dimensions of Body)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - A)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- B)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - C)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - D)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - E)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- F)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- G)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - H)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - J)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- K)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - L)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- M)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - N)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body - P)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- Q)	-
7.4 and Table 2(a) ,2(b), 3(a) & 3(b) and Fig.2 (Dimensions of Body- R)	-
7.5 (Screw Threads IS 2643 (Part 3) Class B & IS 4218 (Parts 1 to 6))	-
7.6 (Piston)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - A)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - B)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - C)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - D)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - E)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - F)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - G)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - H)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - J)	-
7.6 and Table 4(a) & 4(b) (Dimensions of the piston - K)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - A)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- B)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - C)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - D)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - E)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- F)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- G)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- H)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- J)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- K)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- L)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- M)	-
7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers- N)	-
7.7.2 (Levers)	-
7.7.3 (Levers)	-
7.7.3 (Clearance diameter different between the lever and the arm at the joint)	-
7.7.3 (Levers)	-
7.7.4 (Short arm of the lever)	-
7.7.5 (Levers)	-
7.7.5 (Levers)	-
7.7.6 (Levers)	-
7.7.7 (Piston Travel)	-
7.9.2 (Silencing Pipes and Anti-Siphonage Provision -Diameter ofthe hole)	-
7.1 (Floats - Dia of float IS 9762)	-
7.1 (Floats - Wall thickness IS 9762)	-
7.1 (Floats - Tapping of boss, IS 9762)	-
7.1 (Floats - Insert wall thickness IS 9762)	-
7.1 (Floats - Insert base thickcess IS 9762)	-
7.1 (Floats - Axial length of thread B IS 9762)	-
7.11 and Table 6 (Back Nut - A IS 2643 (Part 3))	-
7.11 and Table 6 (Back Nut - B IS 2643 (Part 3))	-
7.11 and Table 6 (Back Nut - C IS 2643 (Part 3))	-
7.11 and Table 6 (Back Nut - D IS 2643 (Part 3))	-
7.11 (Back Nut - Internal thread IS 2643 (Part 3))	-
8.1 (Hydraulic Test)	-
8.3 and Table 7 (Test for Mechanical Strength of Lever)	-

Complete

-
-

498

IS 1319 (1983)

Specification for edible tapioca starch (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 3.1 (Description)	-
CL 3.3 (Particle Size)	-
Table 1 (i), CL No. Cl No. 4 of IS: 4706 : 1978 ( Part 2 )- 1978 (Moisture)	-
Table 1 (ii), CL No. Cl No. 5 of IS: 4706 : 1978 ( Part 2 )- 1978 (Total ash (on dry basis))	-
Table 1 (iii), CL No. Cl No. 8 of IS: 4706 : 1978 ( Part 2 )- 1978 (Acid-insoluble ash (on dry basis ))	-
Table 1 (v), CL No. Cl No. 10 of IS: 4706 : 1978 ( Part 2 )- 1978 (Protein (on dry basis))	-
Table 1 (vi), CL No. Cl No. 11 of IS: 4706 : 1978 ( Part 2 )- 1978 (Sulphur dioxide, mg/kg)	-
Table 1 (vii), CL No. Cl No. 12 of IS: 4706 : 1978 ( Part 2 )- 1978 (Crude fibre (on dry basis0)	-
Table 1 (viii), CL No. Cl No. 13 of IS: 4706 : 1978 ( Part 2 )- 1978 (pH of aqueous extract)	-
Table 1 (ix), CL No. Cl No. 12 of IS: 4706 ( Part 1 )-1978 (Cold-water solubles (on dry basis))	-

Partial

-
-

499

IS 10065 (1981)

Specification for roasted groundnut (Peanut) kernels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 4.1 (Description)	-
CL 4.2 (Descrption)	-
Table 1 (i), Annex B (Moisture)	-
Table 1 (iv), Annex J (Aflatoxin )	-

Partial

-
-

500

IS 1109 (1980)

Specification for borax (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
Clause 3.2 (TABLE 1) (Sodium tetraborate decahydrate content)	-
Clause 3.2 (TABLE 1) (Matter insoluble in water)	-
Clause 3.2 (TABLE 1) (Carbonates)	-
Clause 3.2 (TABLE 1) (Chlorides)	-
Clause 3.2 (TABLE 1) (Sulphates)	-
Clause 3.2 (TABLE 1) (Phosphates)	-
Clause 3.2 (TABLE 1) (Iron)	-
Clause 3.2 (TABLE 1) (Calcium)	-
Clause 3.2 (TABLE 1) (Heavy metals (as Pb))	-
Clause 3.2 (TABLE 1) (Arsenic)	-
Clause 3.2 (TABLE 1) (pH value)	-
Clause 3.2 (TABLE 1) (Reaction to ammonical silver nitrate)	-

Partial

-
-

501

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 12 (UTM)	-
Cl 13 (Press)	-
Cl 14 (Workmanship)	-
Cl 9 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 ( Copper %)	-
6.1 ( Aluminium %)	-
6.1 (V)	-
6.1 (Cr)	-
6.1 (Mo)	-
6.1 (Ni)	-
6.1 ( Nitrogen%)	-
6.1 (CE)	-

Partial

-
-

502

IS 10508 (2007)

Phosphoric acid, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 3.1 (Description)	-
CL 3.2 (Test for Phosphate )	-
Table 1 (i), Annex A (Purity as H3PO)	-
Table 1 (ii), Annex B (Nitrates)	-
Table 1 (iii), Annex C (Volatile acids)	-
Table 1 (iv), Annex D (Chlorides)	-
Table 1 (v), Annex E (Sulphates)	-
Table 1 (vii), CL 15 IS 1699 (Arsenic (as As))	-
Table 1 (viii), CL 15 IS 1699 (Lead (As Pb))	-
Table 1 (ix), CL 16 IS 1699 (Heavy Metals)	-

Partial

-
-

503

IS 11657 (1986)

Specification for phosphorus oxychloride, technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description )	-
2.2, Table 1 and A-3 of IS 11657 (Relative density at 27°C)	-

Partial

-
-

504

IS 8052 (2006)

Steel ingots,billets and blooms for the production of springs, rivets and screws for general engineering applications - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
6.1 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
6.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
6.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
6.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
6.1 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method)	-
6.1 Table 1 (Molybdenum- IS 228 or any other established instrumental /Chemical method)	-
6.1 Table 1 (Vanadium- IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

505

IS 7557 (1982)

Specification for steel wire (Up To 20 Mm) for the manufacture of cold - Forged rivets (First Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4.1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4.1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4.3 (Copper- IS 228 or any other established instrumental /Chemical method)	-
4.4 (Silicon- IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

506

IS 12923 (1990)

Cane gur (Jaggery) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (vii), Annex A (Description)	-
Table 1 (iii), IS 15279 CL 4 (Moisture, Grade 1)	-
Table 1 (v), IS 15279 CL 10 (Sulphated ash (on dry basis), Grade 1)	-
Table 1 (vii), Annex A (Ash insoluble in dilute hydrochloric acid (on dry basis), Grade 1)	-

Partial

-
-

507

IS 863 (1988)

Specification for cotton bandage cloth, non-sterilized (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (pH value of aqueous extract,)	-
Table 1 (Scouring loss, Max)	-
Table 1 (pH value of aqueous extract,)	-
Table 1 (Scouring loss, Max)	-

Complete

-
-

508

IS 7494 (1981)

Specification for steel for valves for internal combustion engines (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, 6.2, 6.3, & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1, 6.2, 6.3, & Table 1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

509

IS 12931 (1990)

Atrazine WP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Atrazine Content)	-
3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 iii (Suspensibility)	-
3.3 Table 1 iv (Acidity/Alkalinity)	-
3.3 Table 1 v (Wettability)	-

Complete

-
-

510

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

BWP/ BWR/ MR

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 Table (i) (BWP (BOiling WaterProof))	-
4 Table (i) (BWR (Boiling Water Resistant))	-
4 Table (i) (MR (Moisture Ressistant))	-
7.4 (Acidity and Alkalinity ( pH))	-
5,7.4 (Keeping Quality (Resistance to heat Polymerization))	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List