BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

451

IS 9294 (1979)

Cold-Rolled Stainless Steel Strips for Razor Blades

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Freedom from defects )	-
9.1 (Edge condition )	-
10.1 (Dimensions, mm )	-
10.2.2 (Edge camber )	-
10.2.3 (Edge Ripple )	-
10.2.4 (Finish)	-

Partial

-
-

452

IS 11946 (1987)

Specification for soft magnetic iron strips

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 Table 1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 Table 1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 Table 1 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 Table 1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 Table 1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 Table 1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

453

IS 11833 (1986)

Specification For Dry Powder Fire Extinguisher For Metal Fires

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1.2 (Carbon)	-
Cl.4.1.2 (Sulphur)	-
Cl.4.1.2 (Phosphorus)	-
Cl.4.1.2 (Manganese)	-
Cl.4.1.2 (Chromium)	-
Cl.4.1.2 (Boron)	-
Cl.4.1.2 (Molybdenum)	-

Partial

-
-

454

IS 3205 (1984)

Specification for precipitated barium carbonate, technical (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2, Table 1 and Appendix A-2 of IS 3205 (Barium (as Ba ) - for All Grades)	-
3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 1 )	-
3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 2)	-
3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 1)	-
3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 2)	-
3.2, Table 1 and Appendix A-6 of IS 3205 (Free Alkali - For Grade 2)	-
3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 1)	-
3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 2)	-
3.2, Table 1 and Appendix A-8 of IS 3205 (Total Sulphur ( as SO4 ) - For Grade 1)	-
3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 1 )	-
3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 2)	-
3.2, Table 1 and Appendix A-10 of IS 3205 (Sodium Oxides ( as NaO2 ) - For Grade 1)	-
3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 1)	-
3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 2)	-
3.2, Table 1 and Appendix A-12 of IS 3205 (Tap Density - For Grade 1)	-
3.2, Table 1 and Appendix A-13 of IS 3205 (Residue retained on 63 micron IS sieve - For Grade 1)	-
3.2, Table 1 and Appendix A-14 of IS 3205 (Reaction efficiency ( after 45 minutes ) - For Grade 2)	-

Partial

-
-

455

IS 11587 (1986)

Specification for structural weather resistant steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1, Table -1 (WR-Fe 480 A, C )	-
Clause 5.1, Table -1 (WR-Fe 480 A, S )	-
Clause 5.1, Table -1 (WR-Fe 480 A, P )	-
Clause 5.1, Table -1 (WR-Fe 480 B, Mn)	-
Clause 5.1, Table -1 (WR-Fe 480 B, Si)	-

Partial

-
-

456

IS 5516 (1996)

Variable flow type air - Permeability apparatus (Blaine Type) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
6.1 (PARTS AND ACCESSORIES-Permeability Cell-Inside Dia)	-
6.1 (PARTS AND ACCESSORIES-Permeability Cell-Bottom end Length)	-
6.2 (PARTS AND ACCESSORIES-Perforated Disc-Thickness)	-
6.2 (PARTS AND ACCESSORIES-Perforated Disc-No. of holes)	-
6.3 (PARTS AND ACCESSORIES-Plunger-Clearance)	-
6.3 (PARTS AND ACCESSORIES-Plunger-Clearance-distance between the bottom of the plunger and the top surface)	-
6.5 (PARTS AND ACCESSORIES-Manometer-Dia )	-

Complete

-
-

457

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 9 (Tensile Test On UTM)	-
Cl 11 (Workmanship)	-
Cl 13 (Workmanship)	-
6 AND AS PER IS 7887 (CARBON)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (ALUMINIUM)	-
6 AND AS PER IS 7887 (MICRO ALLOY)	-

Partial

-
-

458

IS 11169 : Part 2 (1989)

Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1,6.2 Table 2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Other(Titanium)- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

459

IS 8749 (2002)

Biogas stove - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Materials)	-
5.3 (Materials)	-
7 (Rigidity and stability)	-
8.1 (Gas taps)	-
8.2 (Gas taps)	-
8.3 (Gas taps)	-
8.4 (Gas taps)	-
8.5 (Gas taps)	-
8.5.1 (Gas taps)	-
8.6 (Gas taps)	-
8.7 (Gas taps)	-
8.8 (Gas taps)	-
8.9 (Gas taps)	-
8.1 (Gas taps)	-
8.10.1 (Gas taps)	-
8.11 (Gas taps)	-

Partial

-
-

460

IS 10632 : Part 2 (1983)

Specification for non magnetic stainless steels for electrical applications: Part 2 specific requirements for binding wires

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

461

IS 5514 (1996)

Specification Apparatus Used in `Le-chatelier' Test

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (CONSTRUCTION-Thickness)	-
2 (CONSTRUCTION-Internal Dia.)	-
2 (CONSTRUCTION-Height)	-
2 (CONSTRUCTION-Distance between ended)	-
2 (CONSTRUCTION-cover plate Weight)	-
3-Table 1 (DIMENSIONS-Outer side of the mould to the end of the indicator)	-
3-Table 1 (DIMENSIONS-Internal diameter of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-Split)	-

Complete

-
-

462

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Diameter & Out Of Roundness)	-
Cl 6 (Diameter & Out Of Roundness)	-
Cl 6 (Diameter & Out Of Roundness)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( CARBON)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SULPHUR)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (PHOSPHURS)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (MANGANESE)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SILICON)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( ALUMINIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (NITROGEN)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Nickel)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Chromium)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Molybdenum)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (NIOBIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (VANADIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (TITANIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (TIN)	-

Partial

-
-

463

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

464

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nitrogen-Relevant parts of IS 228)	-
4 (FREEDOM FROM DEFECTS)	-
6, Table 2 (i) Yield stess/.2% Proof stress, Mpa)	-
6, Table 2 (ii)Ultimate Tensile Strength, Mpa)	-
6, Table 2 (iii)Elongation, %)	-
6, Table 2 (iv) Hardness, HBW)	-
7 (DIMENSIONS AND TOLERANCE)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nickel-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Chromium-Relevant parts of IS 228)	-

Complete

-
-

465

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-
4.1 (Chromium- IS 228)	-
4.1 (Sulphur+Phosphorous- IS 228)	-
3.1 (Nitrogen- IS 228)	-

Partial

-
-

466

IS 10212 : Part 1 (1986)

General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - i) (Bursting Strength)	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - ii) (Water Absorption Cobb/30 min )	-

Partial

-
-

467

IS 4824 (2006)

Bead wire for tyres - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 3 (UTM)	-
Cl 8 (Torsion)	-
Cl 9 (Press)	-
Cl 11 (Weight)	-
Cl 13 (Workmanship)	-
Cl 14 (Diameter)	-

Partial

-
-

468

IS 5513 (1996)

Specification for vicat apparatus

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
5.1 (constructions-General)	-
5.1.1 (constructions-General)	-
5.2 (constructions-Needles )	-
5.2.1 (constructions-Needles -Clearance)	-
5.2.2 (constructions-Needles -Dimensions of Needles-Dia)	-
5.2.2 (constructions-Needles -Dimensions of Needles-Length)	-
5.3 (constructions-Plunger-Dia)	-
5.3 (constructions-Plunger-Length)	-
5.4 (constructions-Movable Rod-Clearance)	-
5.5 (constructions-Graduated Scale )	-
5.5 (constructions-Vicat Mould-internal diamete of top)	-
5.5 (constructions-Vicat Mould-internal diamete of Bottom)	-
5.5 (constructions-Vicat Mould-Height)	-
5.5 (constructions-Vicat Mould-Wall thickness)	-
5.7 (constructions-Mass-Needle C)	-
5.7 (constructions-Mass-Needle F)	-
5.7 (constructions-Mass-Plunger G)	-

Complete

-
-

469

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2 & 4.2 (PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-
9.2 & 4.2.3 (Nominal Dimensions-variation in the length of units )	-
9.2 & 4.2.3 (Nominal Dimensions -variation in height and width of units )	-
9.5 (PHYSICAL REQUIREMENTS -Water Absorption)	-

Partial

-
-

470

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2 (Physical requirments-Dimensions-Length)	-
8.2 (Physical requirments-Dimensions-Height)	-
8.2 (Physical requirments-Dimensions-Width)	-

Partial

-
-

471

IS 8229 (1986)

Specification for oil - Well cement (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 and Table 2 iii (Soundness, Autoclave expansion IS 4031:1988)	-

Partial

-
-

472

IS 2098 (1997)

Asbestos cement building boards - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 Table -1 ( TOLERANCES - 1.Tolerance on Length & Width)	-
7.2 Table -1 (2.Tolerance on Thickness )	-
8.3 Table 1 & 7.1 (TESTS-Measurement of Thickness )	-
8.4 (TESTS-Water Absorption Test )	-

Partial

-
-

473

IS 3832 (2005)

Hand - Operated chain pulley block - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2 (Classification)	-
Cl 5.1 (Frame)	-
Cl 5.3 (Load brake)	-
Cl 5.4 (Pawls)	-
Cl 5.6 (Lubrication)	-
Cl 5.7 (Suspension Fittings)	-
Cl 5.8.1 (Load Chain )	-
Cl 5.10 (Hand Chain)	-
Cl 9.1 (Design Test)	-

Partial

-
-

474

IS 2080 (1980)

Specification for stabilized hydrogen peroxide (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl No. 3.2 (Strength)	-
Cl NO. 3.3.1 (Strength)	-
Cl NO. 3.3.2 (Strength)	-
Cl No. 3.4 [ Table 1, Sl no.(i) ] Appendix C-1 Grade 1 (Acidity (as H2SO4))	-
Cl No. 3.4 [ Table 1, Sl no. (i)] Appendix C-1 Grade 2 (Acidity (as H2SO4))	-
Cl No. 3.4 [ Table 1, Sl no. (i)] Appendix C-1 Grade 3 (Acidity (as H2SO4))	-
Cl No. 3.4 [ Table 1, Sl no. (ii)] Appendix C-2 Grade 1 (Residue on evaporation.)	-
Cl No. 3.4 [ Table 1, Sl no.( ii)] Appendix C-2 Grade 2 (Residue on evaporation.)	-
Cl No. 3.4 [ Table 1, Sl no. (ii)] Appendix C-2 Grade 3 (Residue on evaporation.)	-
Cl No. 3.4 [ Table 1, Sl no.(iii)] Appendix C-3 Grade 1 (Residue on ignition,)	-
Cl No. 3.4 [ Table 1, Sl no.(iii)] Appendix C-3 Grade 2 (Residue on ignition,)	-
Cl No. 3.4 [ Table 1, Sl no.(iii)] Appendix C-3 Grade 3 (Residue on ignition,)	-
Cl No. 3.4 [ Table 1, Sl no.(iv) ] Appendix C-4 Grade 1, Grade 2 , & Grade 3 (Iron ( at Fe ))	-
Cl No. 3.4 [ Table 1, Sl no.(v) ] Appendix C-5 Grade 1, Grade 2 , & Grade 3 (Copper ( as Cu ))	-
Cl No. 3.4 [ Table 1, Sl no.(vi) ] Appendix C-6 Grade 1, Grade 2 , & Grade 3 (Lead (as Pb))	-
Cl No. 3.4 [ Table 1, Sl no.(vii) ] Appendix C-7 Grade 1, Grade 2 , & Grade 3 ref to 5.1 of IS : 2088-1971 (Arsenic ( as As2O3 ))	-

Partial

-
-

475

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Substance, Ref IS 1763)	-
Cl. 4.4 (Size and tolerance on size)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tensile index, Account book-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tensile index, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (One minute cobb test, Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Wax pick, Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Smoothness(Bendtsen),Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tear index, Account book-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tear index, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Tensile index, Azure laid-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Tensile index, Azure laid-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii (Tear index, Typewriting-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Smoothness(Bendtsen),Account book)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (One minute cobb test, Azure laid)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (One minute cobb test, Azure laid)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-MD)	-
Cl. 4.5 (pH)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tear index, Bond-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tear index, Bond-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (One minute cobb test, Bond)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi (One minute cobb test, Printing White Super Calendered)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii (Tensile index, Typewriting-MD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-

Partial

-
-

476

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

- View breakup
Rs 13800/- with regulator, Rs 6300/- without regu.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13.1 (Marking)	-
13.1 (a) (Marking)	-
13.1 (b) (Marking)	-
13.1 (c) (Marking)	-
13.1 (d) (Marking)	-
13.1 (e) (Marking)	-
13.1 (f) (Marking)	-
13.1 (g) (Marking)	-
13.1 (h) (Marking)	-
13.1 (j) (Marking)	-
13.2 (Marking)	-
13.4 (Marking)	-
3.1 (Sizes )	-
4.1 (Rated Voltage)	-
5.1 (Rated frequency)	-
6.1 (Design and General Construction)	-
6.3 (Design and General Construction)	-
6.3 (Design and General Construction)	-
6.4 (Design and General Construction)	-
6.5 (Design and General Construction)	-
6.6 (Design and General Construction)	-
6.7 (Design and General Construction)	-
6.9 (Design and General Construction)	-
6.1 (Design and General Construction)	-
6.11 (Design and General Construction)	-
6.12 (Design and General Construction)	-
7.1 (Design and General Construction)	-
8.1 (Design and General Construction)	-
9 (Design and General Construction)	-
10.1 (Starting )	-
11.1 (Interchangeability)	-
14.3.A (Temperature-Rise (for motors))	-
14.3.A (Temperature-Rise (for motors))	-
14.3.A (Temperature-Rise (for motors))	-
14.3.A (Temperature-Rise (for motors))	-
14.3.B (Temperature-Rise (for regulators))	-
14.3.B (Temperature-Rise (for regulators))	-
14.4 (Moistureproofness (for regulators only))	-
14.4 (Moistureproofness (for regulators only))	-
14.1 & 14.6 (Power factor)	-
14.7 (ac leakage)	-
14.8 (High voltage test)	-
14.9 (Insulation-Resistance)	-
14.1 (Earthing continuity)	-
14.11 & 15.1 (Electrical Input)	-
14.12 & 16 (Fan Speed)	-
14.2 & 15.1 (Air Delivery)	-

Partial

-
-

477

IS 1322 (1993)

Bitumen Felts for Water Proofing and Damp-proofing

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4 & Table 1 (Weight )	-
5.5 (Free from external defects - IS 1322)	-
6 (Dimension-IS 1322)	-
7.1 (Breaking Strength test- IS 13826(Part 1))	-
7.1 (Pliabilitry Test-IS 13826(Part 2))	-
7.1 (Strage Sticking Test-IS 13826(Part 3))	-
7.1 (Pressure Head Test-IS 13826(Part-4 )	-
7.1 (Heat Resistance Test-IS 13826(Part 5))	-
7.1 (Water Absorption Test-IS 13826(Part 6))	-

Partial

-
-

478

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
8.1.1 Table 1 (Tensile Strength- IS 1608(1))	-
8.1.1 Table 1 (Yield Strength- IS 1608)	-
8.1.1 Table 1 (Elongation Percent- IS 1608)	-
8.2 (Drift Expansion Test- IS 2335)	-
8.3 (Flattening Test- IS 2328)	-
9.1 Table 2 (Outside Diameter)	-
9.1 Table 2 (Thickness)	-
9.1 Table 2 (Mass)	-
10 (Hardness)	-
13.1.1 (Ovality)	-
13.1.2 (Eccentricity)	-
15.1 (Straightness)	-
16.1 (Length)	-
17.1 (Surface Protection)	-

Complete

-
-

479

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Description)	-
Cl.4.3 (Available Chlorine (Annex A))	-
Cl.4.4 (Moisture (Annex B))	-
Cl.4.3 (Size (Mass of tablet))	-

Complete

-
-

480

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Nb+V+Ti - IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List