BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

511

IS 1159 (1981)

Specification for baking powder (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (ii), CL 12 of IS : 6287 • 1971 (Arsenic (as As))	-
Table 1 (iii), CI 13 IS : 6287 • 1971 (Heavy Metals (As Pb))	-
CL 2.1.1 (Sodium Bicarbonate ( see IS : 2124 • 1974))	-
Cl 2.1.2 (2.1.% Edible Starches)	-
Table 1 (i), Annax A (Available carbon dioxide)	-

Complete

-
-

512

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (UTM)	-
Cl 7 (Bending To Both Side At 90°, Then Straight)	-
Cl 9 (Workmanship)	-
Cl 10 (Width & Thickness)	-
Cl 11 (Workmanship)	-

Partial

-
-

513

IS 879 (1981)

Specification for sodium nitrite (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1.1 (Description)	-
3.1.2 (Description)	-
3.2 Table 1 (i) (Moisture and volatile matter, )	-
3.2 Table 1 (ii) (Assay ( as NaNO2 ),)	-
3.2 Table 1 (iii) (Matter insoluble in water, )	-
3.2 Table 1 (iv) (Alkalinity ( as Na2CO3 ),)	-
3.2 Table 1 (v) (Chloride ( as Cl ),)	-
3.2 Table 1 (vi) (Sulphate ( as SO2 ), )	-
3.2 Table 1 (vii) (Heavy metals ( as Pb ), )	-
3.2 Table 1 (viii) (Iron ( as F , )	-
3.2 Table 1 (ix) (Arsenic ( as As ), )	-
3.2 Table 1 (x) (Calcium and magnesium ( as Ca ), )	-
3.2 Table 1 (xi) (Potassium ( as K ), )	-
3.2 Table 1 (xii) (Sodium nitrate content ( as NaNO3 ),)	-

Complete

-
-

514

IS 13801 (2013)

Chequered Cement Concrete Tiles -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl 7, 8 &9) (Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-
Cl 12.1 (Concavity & Convexity )	-
Cl 12.3 (Shall not exceed 1 percent of the length of the edge.)	-
Cl 12.4 (Water absorption)	-
Cl 11 (Finish)	-

Partial

-
-

515

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 11 (Workmanship)	-
Cl 12 (Length, Width & Thickness)	-
Cl 13 (Workmanship)	-

Partial

-
-

516

IS 12981 (1991)

Common salt - Iron fortified - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 3.1 (Description )	-
CL 3.2 (Moisture)	-
CL 3.3, Annex A of IS 253 : 1985 (Particle Size)	-
Table 1 (i), Annex A, Annex IS 253 : 1985 A-4 (Water insoluble matter)	-
Table 1 (vii), Annex A-3 (pH of 5 percent aqueous solution)	-
Table 1 (vii), Annex A-4 (Phosphates ( as PO4 ))	-
Table 1 (iii), IS 253 : 1985 A-6 (Matter insoluble in dilute hydrochloric acid.)	-

Complete

-
-

517

IS 3829 : Part 2 (1978)

Specification for steam sterilizers: Part 2 horizontal cylindrical high speed steam sterilizers, pressure type (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shape)	-
4.2 (Size)	-
6.1 (as per Cl. 6.1)	-
6.2 (as per Cl. 6.2)	-
6.2.1 (as per Cl. 6.2.1)	-
6.2.2 (as per Cl. 6.2.2)	-
6.2.3.1 (as per Cl. 6.2.3.1)	-
6.2.4 (as per Cl. 6.2.4)	-
6.3 (Door- as per Cl. 6.3)	-
6.3.2 (Door Gasket- as per Cl. 6.3.2)	-
6.3.3 (Adjustment- as per Cl. 6.3.3)	-
7.1.1 (Operating Valve- as per Cl. 7.1.1)	-
7.1.1.1 (as per Cl. 7.1.1.1)	-
7.1.2 (Exhaust time- Cl. 7.1.2)	-
7.1.3.1 (as per Cl. 7.1.3.1)	-
7.1.4 (vaccum breaker- Cl. 7.1.4)	-
7.1.5 (Drying system-Cl. 7.1.5)	-
7.1.6 (Baffle- Cl. 7.1.6)	-
7.1.7 (Chamber drain- Cl. 7.1.7)	-
7.1.7.1 (Plug Screen- Cl. 7.1.7.1)	-
7.1.7.2 (Thermometer- Cl. 7.1.7.2)	-
7.1.8 (Gauges- Cl. 7.1.8)	-
8 (Hydrostatic Test- as per Cl 8.1, 8.1.1 & 8.2)	-

Partial

-
-

518

IS 15558 (2005)

Mini domestic water heater for use with LPG - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Construction)	-
4.1.2 (Construction)	-
4.1.3 (Construction)	-
4.1.4 (Construction)	-
4.1.5 (Construction)	-
4.1.6 (Construction)	-
4.1.7 (Construction)	-
4.1.8 (Construction)	-
4.1.10 (Construction)	-
4.1.11 (Construction)	-
4.1.12 (Construction)	-
5.2 (Materials)	-
5.3 (Materials)	-
5.4 (Materials)	-
6.2 (Connections)	-
6.3 (Connections)	-
6.4 (Connections)	-
6.5 (Connections)	-
6.6 (Gas Inlet Connections)	-
6.6 (Gas Inlet Connections)	-
6.6 (Gas Inlet Connections)	-
6.6 (Gas Inlet Connections)	-
6.6 (Gas Inlet Connections)	-
6.6 (Gas Inlet Connections)	-
7 (Flame Visibility)	-
8 (Gas Taps)	-
9 (Flame Failure Device)	-
10 (Ignition Device)	-
11 (Protection Against Accidental Overheating)	-
12 (Water Rate Adjuster)	-
14 (Gas Soundness)	-
15 (Water Soundness)	-
16 (Thermal Efficiency)	-
16 (Thermal Efficiency)	-
17 (Combustion)	-
18 (Gas Consumption)	-
19.1 (Ignition and flame travel)	-
19.2 (Ignition and flame travel)	-
19.3 (Ignition and flame travel)	-
20 (Flame Stability)	-
21 (Noise Control)	-
22 (Flash Back)	-
23 (Resistance to Draught)	-
24 (Fire Hazard And Limiting Temperature )	-
24 (Fire Hazard And Limiting Temperature)	-
25 (Time For Temperature Rise)	-
26 (Hot Water Output Test)	-

Complete

-
-

519

IS 758 (1988)

Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1,Table 1,Sr.No.vii IS : 1390 (pH value)	-
3.1,Table 1,Sr.No.viii IS : 1383 (Scouring Loss)	-

Partial

-
-

520

IS 3564 (1995)

Hydraulically Regulated Door Closers -Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
B-1.5 (d) Endurance Test)	-
B-1.4 (c) Performance Requirements)	-
B-1.3 (b) Surface)	-
B-1.2 (a) Visual Inspection)	-
8 (Essential Requirements)	-
9 (Finish)	-

Complete

-
-

521

IS 3829 : Part 1 (1999)

Specification for steam sterilizers: Part 1 horizontal cylindrical and horizontal rectangular steam sterilizers, pressure type (For Hospital And Pharmaceutical Use) (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4 (Design)	-
Cl. 5 - Table 1 & 2 (Shape & Size)	-
Cl. 7 (Construction)	-
Cl. 9 (Hydrostatic test)	-
Cl. 9 (Hydrostatic test)	-
Cl. 9 (Hydrostatic test)	-
Cl. 10 (Method of stem supply to Sterilizer)	-
Cl. 10.8 (Capacity)	-
6.1, 6.2 (Chamber)	-
6.1, 6.2 (Jacket)	-
6.1 and 6.2 (Other)	-

Partial

-
-

522

IS 4368 (1967)

Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Freedom from Defects)	-
Cl 8 (Diameter, Ovality & Weight)	-
Cl 11 (Hardness & Tensile Test)	-

Partial

-
-

523

IS 14183 (1994)

Pesticide - Cartap hydrochloride SP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 iii (pH or 10 percent ( mlm ) extract)	-
3.3 Table 1 ii (Matter insoluble in water )	-

Complete

-
-

524

IS 799 (1985)

Specification for ammonia, liquor (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 Table 1 (i) (Ammonia,)	-
3.2 Table 1 (ii) (Residue on evaporation,)	-
3.2 Table 1 (iii) (Carbonate ( as CO2 ),)	-
3.2 Table 1 (iv) (Chloride ( as Cl ),)	-
3.2 Table 1 (v) (Phosphate ( as PO4 ), )	-
3.2 Table 1 (vi) (Silicate ( as SiO2 ), )	-
3.2 Table 1 (vii) (Sulphate ( as SO4 ), )	-
3.2 Table 1 (viii) (Sulphide ( as S ),)	-
3.2 Table 1 (ix) (Arsenic (as As), )	-
3.2 Table 1 (x) (Calcium and magnesium ( as Ca ),)	-
3.2 Table 1 (xi) (Copper ( as Cu ), )	-
3.2 Table 1 (xii) (Iron (a s Fe), )	-
3.2 Table 1 (xiii) (Heavy metals ( as Pb ), )	-
3.2 Table 1 (xiv) (Reducing substances ( as O ),)	-
3.2 Table 1 (xv) (Pyridine and homologues, )	-

Complete

-
-

525

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Freedom from defects)	-
5 and 10.3.1 (Tensile strength. IS 1608)	-
5 and 10.3.1 (Yield Stress. IS 1608)	-
5 and 10.3.1 (Percentage Elongation. . IS 1608)	-
11.3 ( Bend Test. IS 1599)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (Mass. IS 808)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (D)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (B)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (T)	-
Table-1, 5.1, 8.1 & 8.2 (Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Aluminium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-

Partial

-
-

526

IS 14184 (1994)

Pesticide - Cartap hydrochloride G - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Particle Size)	-
3.2.3 (Dust)	-
3.2.4 (Moisture Content)	-
3.3.2 (pH or 1 percent ( mlm ) extract)	-

Complete

-
-

527

IS 14186 (1994)

Pesticide - Diflubenzuron WP - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 ii (Sieving requirements material passing through 44 micron IS sieve)	-
3.3 Table 1 v (Wettability)	-
3.3 Table 1 iv (Acidity (as H2SO4))	-
3.3 Table 1 i (Diflubenzuron content )	-
3.3 Table 1 iii (Suspensibility)	-

Partial

-
-

528

IS 1155 (1968)

Specification for wheat aita (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
CL 3.1 (Decription)	-
Table 1 (i), Annex A (Moisture LG)	-
Table 1 (i), Annex A (Moisture HG)	-
Table 1 (ii), Annex B (Total Ash (on dry basis) LG)	-
Table 1 (ii), Annex B (Total Ash (on dry basis) HG)	-
Table 1 (iii), Annex C (Add insoluble Ash (on dry basis) LG)	-
Table 1 (iii), Annex C (Add insoluble Ash (on dry basis) HG)	-
Table 1 (iv), Annex D (Glutin (on dry basis) LG)	-
Table 1 (iv), Annex D (Glutin (on dry basis) HG)	-
Table 1 (v), Annex E (Crude Fibre (on dry basis) LG)	-
Table 1 (v), Annex E (Crude Fibre (on dry basis) HG)	-
Table 1 (vi), Annex F (Alcoholic acidity (As H2SO4.), with 90 prcent Alcohol (on dry basis) LG)	-
Table 1 (vi), Annex F (Alcoholic acidity (As H2SO4.), with 90 prcent Alcohol (on dry basis) HG)	-
Table 1 (vii), Annex G (Granularity(on dry basis) LG)	-
Table 1 (vii), Annex G (Granularity(on dry basis) HG)	-

Partial

-
-

529

IS 14300 (1995)

Neem based EC containing azadirachtin - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.2.1 (Description)	-
Cl. 3.2.2 (Cold Test)	-
Cl. 3.2.3 (Flash point)	-
Cl. 3.2.4 (Emulsion Stability)	-
Cl. 3.2.1 (Description)	-

Partial

-
-

530

IS 7312 (2018)

Welded and seamless steel dissolved acetylene gas cylinders - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1, IS 6240-2008 , Cl 6.2 (Carbon Content)	-
Cl. 4.1, IS 6240-2008 , Cl 6.2 (Sulphur Content)	-
Cl. 4.1, IS 6240-2008 , Cl 6.2 (Phosphorous Content)	-
Cl. 4.1, IS 6240-2008 , Cl 6.2 (Manganese Content)	-
Cl. 4.1, IS 6240-2008 , Cl 6.2 (Aluminium Content)	-
Cl. 4.1, IS 6240-2008 , Cl 6.2 (Silicon Content)	-
Cl. 4.1, For Seamless - IS 7285 (P-1)-2018, Cl 5.2 , Table-1 & 2 (Carbon Content)	-
Cl. 4.1, For Seamless - IS 7285 (P-1)-2018, Cl 5.2 , Table-1 & 2 (Combined Value Of Micro-Alloying Elements like V, Nb, Ti, B, Zr, Sn)	-
Cl. 4.1, For Seamless - IS 7285 (P-2)-2017, Cl 5.2 , Table-1, 2 (Carbon Content)	-
Cl. 4.1, For Seamless - IS 7285 (P-2)-2017, Cl 5.2 , Table-1, 2 (Sulphur + Phosphorous Content)	-
Cl. 4.3 , For Footing Material, Grade HR1 (Desig Commertial) Of IS 1079-2017, Cl. 7.2, Table 3 & 4 (Carbon Content)	-
Cl. 4.3 , For Footing Material, Grade HR1 (Desig Commertial) Of IS 1079-2017, Cl. 7.2, Table 3 & 4 (if addition of Micro Alloying Elements like B, TI, Nb,& V either single of Combination)	-
Cl. 4.2 , For Bung / Valve, as per IS 2062-2011, Grade / Desig - E-250, Quality - A (Carbon Content)	-
Cl. 4.2 , For Bung / Valve, as per IS 2062-2011, Grade / Desig - E-250, Quality - A (Sulphur Content)	-
Cl. 4.2 , For Bung / Valve, as per IS 2062-2011, Grade / Desig - E-250, Quality - A (Phosphorus Content)	-
Cl. 4.2 , For Bung / Valve, as per IS 2062-2011, Grade / Desig - E-250, Quality - A (Manganese Content)	-
Cl 4.2 , Class 1A Desig 15C8 of IS 1875-1992, Cl 6.1 & 6.2 For section 250 mm2 or Less (Carbon Content, IS 228)	-
Cl 4.2 , Class 2 Desig 20C8 of IS 1875-1992, Cl 6.1 & 6.2 for section 250 mm2 or less (Carbon Content, IS 228)	-
9,9.1 (VALVES AND VALVES PAD)	-
9.2 (Valve Protection The valve shall be protected by a stout metal cap perforated for ventilation and of thickness not less than 3.5 mm, screwed on to the neck, or in any other manner approved by the statutory authority.)	-
9.3 (Valves)	-
10,10.1 (FITTINGS OTHER THAN VALVES Footring)	-
10,10.1 (FITTINGS OTHER THAN VALVES Footring )	-
10,10.1 (FITTINGS OTHER THAN VALVES Footring)	-
10,10.1 (FITTINGS OTHER THAN VALVES Footring The bottom of the foot ring shall not be less than 8 mm below the outside bottom of the cylinder shell for cylinders up to 34 l nominal water capacity. For cylinders of more than 34 l itresnominal water capacity and up to 50 litres nominal water capacity, this value shall be minimum 15 mm and for cylinders exceeding 50 Iiters nominal water capacity, this value shall be minimum 25 mm)	-
10.2,10.2.1 IS 13497 (Safety Device)	-
10.2.2 (Safety Device)	-
14 (CHECKING OF WATER CAPACITY The water capacity of the cylinders shall be checked. This shall be done by weighing or by volumetric method. Water capacity of the cylinder shall have atolerance of + 3/-0 percent on the declared value. )	-
15.1 IS 3196(Part 3) (Hydrostatic Stretch Test: Permanent volumetric expansion suffered by the cylinder due to application of test pressure shall not exceed 7.5 percent of the total volumetric expansion at the pressure.)	-
15.2 IS 3196(Part 3) (Hydrostatic Test)	-
16 IS 3196(Part 3) (Pneumatic Leakage Test)	-
17 IS 3196(Part 3) (BURST TEST)	-
18 IS 3196(Part 3) (ACCEPTANCE TESTS )	-
18g IS 3196(Part 3) (c)Weld Joint test specimen)	-
18j IS 3196(Part 3) (d)Bend test Across weld Root Bend test,)	-
18k IS 3196(Part 3) (Face Bend test,)	-
18h IS 3196(Part 3) (c)Weld Joint test specimen)	-
18j IS 3196(Part 3) (d)Bend test Across weld Root Bend test,)	-
18k IS 3196(Part 3) (Face Bend test,)	-
18m IS 3196(Part 3) (e)Macro Examination: Body)	-
18p IS 3196(Part 3) (f) Minimum Thickness test: The thickness shall not be less than agreed finished thickness,Declared thicknes:)	-
19.2.1 (Porous Material)	-
19.2.3 (Gap between cylinder shell and porous material: Overall shrinkage of the filling material is permissible provided that the total clearance between the cylinder shell and filling material does not exceed 0.5 percent of the respective diameter or length but in no case of exceed 3.2 mm measured diametrically and longitudinally and that such clearances do not impair the functions of the filling material.)	-
19.2.4 Annex B (The porosity of the porous filling shall be in the range of 75 to 92 percent with a tolerance of ± 2 percent on nominal declared value as determined by the method prescribed in Annex B)	-
19.2.5 Annex C (The crushing strength of the porous filling shall be 2 156 kN/m2 (22 kgf/cm2 ) minimum as determined by the method prescribed in Annex C)	-
19.3 (Solvent and Acetylene Content)	-
20.2.4e) Annex E (Test of the Integrity of porous material)	-
20.3 (Elevated Temperature Test)	-
20.4 (Vibration Test)	-
20.5 (Backfire Test)	-
20.6 (Bonfire Test)	-

Partial

-
-

531

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1-Table 1 ( DIMENSIONS OF TUBULARS-Pieces )	-
8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples )	-
8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-B )	-
8.2-Table-2 ( DIMENSIONS OF TUBULARS-Nipples-C )	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A)	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B)	-
8.3.1-Table 3 (DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C)	-
7.1 (Chemical Composition - Sulphur - Laddle Analysis IS 228)	-
7.1 (Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-

Partial

-
-

532

IS 7291 (1981)

Specification for high speed tool steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, 5.2 & 14.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & 14.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & 14.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & 14.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & 14.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

533

IS 14411 (1996)

Deltamethrin F - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 (Deltamethrin Content)	-
3.4 (Dispersibility in -Water)	-
3.5 (Acidity)	-

Complete

-
-

534

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (General Requirement)	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-

Complete

-
-

535

IS 14510 (1997)

Lambda - Cyhalothrin WP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table 1 v (Acidity/Alkalinity)	-
3.3 Table 1 iv (Wettability)	-
3.2 (Description)	-
3.3 Table 1 i (Lamda cyhalothrin content )	-
3.3 Table 1 iii (Suspensibility)	-

Complete

-
-

536

IS 7285 : Part 1 (2018)

Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clauses 5.2.1 and 5.4, Table 1 (Controls on Chemical Composition)	-
Clauses 5.2.2 and 5.2.3,Table 2 (Controls on Chemical Composition)	-
13 (COLOUR IDENTIFICATION)	-
7.10 b) (For cylinders of water capacity exceeding 20 litres =)	-

Partial

-
-

537

IS 7226 (1974)

Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Carbon- IS 228)	-
4.1 Table 1 (Manganese- IS 228)	-
4.1 Table 1 (Silicon- IS 228)	-
4.1 Table 1 (Sulphur- IS 228)	-
4.1 Table 1 (Phosphorous- IS 228)	-
4.1 Table 1 (Chromium- IS 228)	-
4.1 Table 1 (Tungsten- IS 228)	-
5 (HARDNESS TEST)	-
6 ( FREEDOM FROM DEFECTS)	-
9.1, Table 3 (i)TOLERANCE ON WIDTH)	-
9.1, Table 4 (ii)TOLERANCE ON THICKNESS)	-
9.2 ( Camber)	-
10 (SURFACE FINISH)	-

Partial

-
-

538

IS 14550 (1998)

Hexaconazole, EC - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.2 (Acidity/Alkalinity)	-

Partial

-
-

539

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-
3.4 - Table 1 - i (Moisture - Annex A of IS 7224)	-
3.3 (material shall pass through 4.00 mm IS sieve)	-
3.4 - Table 1 - ii (Water insoluble matter, on dry basis - A-4 of IS 253 )	-
3.4 - Table 1 - iii (Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-
3.4 - Table 1 - iv (Matter insoluble in dilute HCl, on dry basis - Annex G)	-
3.4 - Table 1 - vi (Iron content (as Fe) - Annex A)	-
3.4 - Table 1 - vii- a (Iodine content, Manufacturer’s level - Annex B)	-
3.4 - Table 1 - viii - b (pH of 5 percent aqueous solution : For other forms of iron fortification - Annex C)	-
3.4 - Table 1 - ix (Sulphate (as SO4) - A-8 of IS 253)	-
3.4 - Table 1 - x (Magnesium (as Mg), water soluble - A-7 of IS 253)	-
3.4 - Table 1 - xi - b (Phosphorous (as P2O5) - For other forms of iron fortification - Annex D)	-
3.4 - Table 1 - xii (Sodium hexa meta phosphate, on dry basis - Annex E)	-
3.4 - Table 1 - xi - a (Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-
3.4 - Table 1 - v (Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-

Partial

-
-

540

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Copper- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Magnesium- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Silicon- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Iron- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Manganese- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Zinc- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Chromium- IS 504 or any other established instrumental/ chemical method)	-
Cl. 6.1 (Titanium and/ other grain refining elements)	-
Cl. 6.1 (Aluminium- IS 504 or any other established instrumental/ chemical method)	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List