BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

541

IS 15160 (2002)

Pretilachlor emulsifiable concentrate - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Pretilachlor content)	-
3.3.2 (Acidity)	-

Complete

-
-

542

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.1 (Dimensions and Tolerances)	-
4.2.2 (Handle)	-
4.3.1 (Manufacture)	-
4.3.2 (Manufacture)	-
4.3.3 (Manufacture)	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-
5.3 (Hydraulic Pressure Test)	-
4.2.2 (Handle)	-

Partial

-
-

543

IS 2403 (2014)

Short - Pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Third Revision)

- View breakup
Rs 3000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table-1,2 (Dimensions- Pitch- p)	-
3.3 Table-1,2 (Dimensions- Roller diameter- d1)	-
3.3 Table-1,2 (Dimensions- Width between inner plates- b1)	-
3.3 Table-1,2 (Dimensions- Bearing pin body diameter- d2)	-
3.3 Table-1,2 (Dimensions-Bush bore-d3)	-
3.3 Table-1,2 (Dimensions- Chain path depth- h1)	-
3.3 Table-1,2 (Dimensions-Inner plate depth- h2)	-
3.3 Table-1,2 (Dimensions-Outer plate depth- h3)	-
3.3 Table-1,2 (Dimensions- Cranked link dimensions- l1)	-
3.3 Table-1,2 (Dimensions- Cranked link dimensions- l2)	-
3.3 Table-1,2 (Dimensions- Cranked link dimensions- c)	-
3.3 Table-1,2 (Dimensions- Transverse pitch- pt)	-
3.3 Table-1,2 (Dimensions- Width over inner link- b2)	-
3.3 Table-1,2 (Dimensions- Width between outer plates- b3)	-
3.3 Table-1,2 (Dimensions- Width over bearing pins- b4)	-
3.3 Table-1,2 (Dimensions- Width over bearing pins- b5)	-
3.3 Table-1,2 (Dimensions- Width over bearing pins- b6)	-
3.3 Table-1,2 (Dimensions- Additional width for joint fastener- b7)	-
3.4.2 (Tensile Test)	-

Partial

-
-

544

IS 8737 (2017)

Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3.1a (Tensile Strength-IS 1608)	-
4.3.1b (Elongation-IS 1608)	-
4.4 (Izod impact strength-IS 1598)	-
5.1.1a Fig 1,2 (SCREW THREADS ON THE VALVE STEM- Type 1 Threads-IS 15894)	-
7.1 (Design Requirements)	-
7.3 (Design Requirements)	-
7.4 (Design Requirements)	-
7.5 (Design Requirements)	-
7.6 (Design Requirements)	-
7.8ai Annex D of IS 9798 (All rubber and other moulded parts coming in contact with LPG in the construction of the valve shall be compatible with LPG, when tested according to Annex D of IS 9798)	-
7.8bi Annex H of IS 9798. (All rubber and other moulded parts shall be suitable for extreme climatic conditions in which the valve is likely to be used, the range of temperature being -20°C to + 65°C. The method of test shall be according to Annex H of IS 9798.)	-
4.6.2,4.6.2.1,4.6.2.2a (Moulded parts (plastics, etc) shall be subjected to immersion test (resistance to hydrocarbons)(Cl.4.6.2.1) Increase in mass :)	-
7.10 (The minimum finished wall thickness at any portion of the valve shall not be less than 2.5 mm)	-
8.1 (Stress Corrosion Test for Copper Alloy As per IS 2305)	-
8.2 (Hydrostatic Test)	-
8.3.1 (Pneumatic Test: Tightness of Joint Packing (in Valve Outlet) and Valve Spindle)	-
8.3.2 (Pneumatic Test: Tightness of Valve Spindle and Valve Housing)	-
8.3.3 (Pneumatic Test: Tightness of Joint Packing and Housing)	-
9.2a (Cycle Test)	-
9.2bi (After the cycle test, the valve shall besubjectedto the pneumatic test given in 8.3 and shall performsatisfactorily:- lPneumatic Test ,after cycle test: Tightness of Joint Packing (in Valve Outlet) and Valve Spindle)	-
9.2bii (Pneumatic Test ,after cycle test: Tightness of Valve Spindle and Valve Housing)	-
9.2biii (Pneumatic Test ,after cycle test: Tightness of Joint Packing and Housing)	-
9.3 (Operation Test)	-
9.4 (Valve Fitting Testing Torque :)	-
9.5a Table 3,Fig. 8 (Impact Test)	-
9.5bi (After the Impact test, the valve shall satisfy Pneumatic test as perCl.8.3:- lPneumatic Test ,after cycle test: Tightness of Joint Packing (in Valve Outlet) and Valve Spindle)	-
9.5bii (Pneumatic Test ,after cycle test: Tightness of Valve Spindle and Valve Housing)	-
9.5biii (Pneumatic Test ,after cycle test: Tightness of Joint Packing and Housing)	-
4.3.1a (Tensile Strength-IS 1608)	-
6.2 (VALVE OUTLET CONNECTIONS: Spring loaded self-closing Valve)	-
4.2.1Sl.No.i (Copper)	-
4.2.1Sl.No.ii (Lead)	-
4.2.1Sl.No.iii (Iron)	-
4.2.1Sl.No.iv (Manganese)	-
4.2.1Sl.No.vi (Zinc)	-
4.2.1Sl.No.v (others(inclusive of iron))	-

Partial

-
-

545

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 13 (Workmanship)	-
Cl 15 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Sulphur %)	-
7.1 (Phosphorus %)	-
7.1 (Manganese %)	-
7.1 (Silicon %)	-
7.1 ( Aluminium %)	-
7.1 ( Nitrogen%)	-
7.1 ( Copper %)	-
7.1 (V)	-
7.1 ( Ti)	-
7.1 (Cr)	-
7.1 (Mo)	-
7.1 ( Nb)	-
7.1 (CE)	-

Partial

-
-

546

IS 15182 (2002)

Propiconazole EC - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Pretilachlor content)	-
3.3.2 (Acidity)	-

Complete

-
-

547

IS 14158 (1994)

Cyfluthrin WP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Cyfluthrin content )	-
3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 iii (Suspensibility)	-
3.3 Table 1 iv (Acidity/Alkalinity)	-
3.3 Table 1 v (Wettability)	-

Complete

-
-

548

IS 15219 (2002)

Aluminium phosphide powder formulation

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3.1 (Aluminium Phosphide Content)	-

Complete

-
-

549

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Appearance)	-
5.1.2 (Film Form)	-
5.1.3 (Odour)	-
5.2.2 (Tolerance on Thickness, Annex-A)	-

Partial

-
-

550

IS 6967 (1973)

Specification for steels for electrically welded round link chains

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 2 (Carbon- IS 228)	-
5.1 Table 2 (Manganese- IS 228)	-
5.1 Table 2 (Sulphur- IS 228)	-
5.1 Table 2 (Phosphorous- IS 228)	-
5.1 Table 2 (Silicon- IS 228)	-

Partial

-
-

551

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Classification Heavy/Medium/L:ight)	-
5.1 (The utensil shall be pressed or spun from one piece)	-
5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-
5.2 (Lid Thickness of the finished utensil, mm)	-
6.1 & Table 1 (ii) Shape of Utensil)	-
6.1 & Table 1 ( Nominal Size, mm)	-
6.1 & Table 1 (Inside dia, Φ D mm Not declared )	-
6.1 & Table 1 (Outside dia Ф NA)	-
6.1 & Table 1 (Height NA)	-
6.1 & Table 1 (Capacity, l NA)	-
6.1 ( Minimum sheet thickness for nominal size )	-
7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-
7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-
8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-
8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-
9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-
10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-
( Clauses 4, 4.1, 4.2 and 4.3) (Aluminium of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Copper of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Magnesium of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Iron of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Manganese of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Zinc of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 21)	-
( Clauses 4, 4.1, 4.2 and 4.3) (Titanium / other Grain of IS 21)	-

Partial

-
-

552

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Sulphur %)	-
6.1 (Phosphorus %)	-
6.1 (Manganese %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-
6.1 ( Nitrogen%)	-
6.1 (Boron)	-
6.1 ( Copper %)	-
6.1 ( Ti)	-
6.1 (V)	-
6.1 ( Nb)	-
6.1 (Microalloying)	-

Complete

-
-

553

IS 336 (1973)

Specification for ether

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no .3.2 (Odour and Taste )	-
Cl no .3.3.1 (Composition )	-
Cl no .3.4 (Solubility )	-
Cl no .3.5 [ Table 1, Sl no.(i) ] Appendix A 2 (Relative density at 20 °C Solvent Grade )	-
Cl no .3.5 [ Table 1, Sl no.(iv) ] Appendix A 5 (Residue on Evaporation )	-
Cl no .3.5 [ Table 1, Sl no.(v) ] Appendix A 6 (Methyl alcohol )	-
Cl no .3.5 [ Table 1, Sl no.(vi) ] Appendix A 7 (Aldehydes and acetone )	-
Cl no .3.5 [ Table 1, Sl no.(vii) ] Appendix A 8 (Sulphurous acids and other free acids )	-

Partial

-
-

554

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Dimensions- a)	-
3.1 (Dimensions- b)	-
3.1 (Dimensions- l)	-
3.2, 3.3, 3.4 (Dimensions- a)	-
3.2, 3.3, 3.4 (Dimensions- b1)	-
3.2, 3.3, 3.4 (Dimensions- b2)	-
3.2, 3.3, 3.4 (Dimensions- l)	-
5 (Hardness- upto 32 mm)	-
5 (Hardness- over 32 mm)	-
6 (Workmanship And Finish)	-
6 (Workmanship And Finish)	-

Complete

-
-

555

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 9 (Strainage Embrittlement)	-
Cl 10 (Erichsen Cupping)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Sulphur %)	-
6.1 (Phosphorus %)	-
6.1 (Manganese %)	-
6.1 (Silicon %)	-
6.1 ( Aluminium %)	-
6.1 (Nitrogen%)	-

Partial

-
-

556

IS 14276 (2016)

Cement bonded particle boards - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Finish)	-
7 (Dimensions and Tolerances)	-
8.5 (Workability)	-
10.3, Table-1 (Test for Density)	-
10.5, Table-1 (Test for Water Absorption)	-
10.6, Table-1 (Test for swelling in water)	-
10.7, Table-1 (Test for modulus of Rupture)	-
10.8, Table-1 (Test for modulus of Elasticity)	-
10.9, Table-1 (Test for tensile strength perpendicular to Surface)	-
10.1, Table-1 (Test for Screw Withdrawal Strength)	-
Clause 8.2 Table 1 (Moisture content)	-

Complete

-
-

557

IS 2645 (2003)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

- View breakup
Rs.8150/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3.3 (Compressive Strength, At 3days & 7 days)	-
Cl 3.2 (Initial & Final)	-
Clause 3.4 (Chloride content)	-

Partial

-
-

558

IS 13785 (1993)

Pesticide - Dodine WP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Dodine content)	-
3.3 Table 1 ii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 iv (Acidity/Alkalinity)	-
3.3 Table 1 v (Wettability)	-

Partial

-
-

559

IS 13692 (1993)

Metalaxyl mancqzeb WP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 Table 1 i (Metalaxyl content,)	-
3.3 Table 1 iii (Sieving requirements material passing through 75 micron IS sieve)	-
3.3 Table 1 v (Wettability)	-

Partial

-
-

560

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (Workmanship)	-
Cl 8.3.1 (Adhesion )	-
Cl 9.1 (Workmanship)	-
Cl 11 (Length, Width & Thickness)	-
Cl 12 (Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-
Cl 12 (Weight)	-
4, 5 (CARBON)	-
4, 5 (SULPHUR)	-
4, 5 (PHOSPHURS)	-
4, 5 (MANGANESE)	-
4, 5 (SILICON)	-
4, 5 (ALUMINIUM)	-
4, 5 (NITROGEN)	-

Partial

-
-

561

IS 8042 (2015)

White portland cement - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 -Table 2- i (Fineness 4031 Part 2)	-
6 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
6 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
6 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
6 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
6 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6 -Table 2- vi (Degree of whiteness-Annex B)	-
5 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5 - Table - 1 ii (Iron oxide - Cl 4.5 of IS 4032:1985)	-
5 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5 - Table - 1 vi (Loss on ignition - Cl 4.2 of IS 4032:1985)	-
5 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985)	-

Partial

-
-

562

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 & Table 2 (Workmanship)	-
Cl 10 (Coating Adhesion )	-
Cl 11 (Workmanship)	-
Cl 12 (Weight)	-
Cl 13 (Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-
4, 5 (CARBON)	-
4, 5 (SULPHUR)	-
4, 5 (PHOSPHURS)	-
4.5 (MANGANESE)	-
4, 5 (SILICON)	-
4, 5 (ALUMINIUM)	-
4, 5 (NITROGEN)	-

Partial

-
-

563

IS 13457 (1992)

Pesticide - Deltamethrin WP specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
Cl. 3.3&3.3.1 Table 1 (Deltamethrin content, )	-
Cl. 3.3 Table 1 (Sieving (material passing through 45 Micron IS Sieve),)	-
Cl. 3.3 Table 1 (Suspensibility, )	-
Cl. 3.3 Table 1 (Acidity (as H2SO4), or Alkalinity (as NaOH))	-
Cl. 3.3 Table 1 (Wettability )	-

Complete

-
-

564

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
10 (Type of enclosures)	-
11 (Methods of cooling)	-
9 (General construction (as per Cl. 9 & F-3))	-
9.1 (General construction (as per Cl. 9 & F-3))	-
9.4.11 (General construction (as per Cl. 9 & F-3))	-
9 (General construction (as per Cl. 9 & F-3))	-
9.4.13 (General construction (as per Cl. 9 & F-3))	-
4.1 (Rated Voltage)	-
4.2 (Rated Frequency)	-
4.3 (Rated Output)	-
4.4 (Rated Speed)	-
7 (Dimensions (Cl.App.F-4))	-
9.5 (Earthing)	-
9.5 (Earthing)	-
9.5 (Earthing)	-
17.3 (a) (No load test at rated voltage and frequency )	-
17.3 (a) (No load test at rated voltage and frequency)	-
17.3 (a) (No load test at rated voltage and frequency)	-
12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-
12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-
12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-
12.1.1 (Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-
12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-
12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-
12.7 (Insulation resistance test)	-
13.1 (High voltage test)	-
13.2 (Moisture proofness)	-
13.2 (Moisture proofness)	-
13.3 (Leakage current test)	-
15.1 (ADDITIONAL TESTS (For ECO - MARK))	-
15.2 (Specific Requirements)	-

Partial

-
-

565

IS 12751 (1989)

Pesticides - Pendimethalin EC - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Pendimethalin content)	-
3.4 (Acidity/Alkalinity)	-

Complete

-
-

566

IS 299 (2012)

Alumino - Ferric - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1 (i) Table 1 ( Insouble matter, Grade 1, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 2, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 3, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 4, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 5, A-3)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 1, A-4)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 2, A-4)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 3, A-4)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 4, A-4)	-
1 (ii) Table 1 (Soluble iron compound as Fe2+ and Fe3+), Grade 5, A-4)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 1, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 2, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 3, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 4, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 5, A-5)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 1, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 2, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 3, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 4, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 5, A-6)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 1, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 2, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 3, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 4, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 5, A-7)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 1, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 2, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 3, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 4, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 5, A-8)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 1, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 2, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 3, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 4, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 5, A-9)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 1, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 2, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 3, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 4, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 5, A-10)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 1, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 2, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 3, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 4, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 5, A-11)	-
1 (x) Table 1 (Chromium (as Cr), Grade 1, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 2, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 3, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 4, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 5, A-12)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 1, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 2, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 3, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 4, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 5, A-13)	-
1 (xii) Table 1 (Selenium (as Se), Grade 1, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 2, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 3, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 4, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 5, A-14)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 1, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 2, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 3, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 4, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 5, A-15)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 1, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 2, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 4, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 5, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 3, A-16)	-

Complete

-
-

567

IS 6006 (2014)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Weight)	-
Cl 7 (Tensile Test On UTM)	-
Cl 4 (Length )	-
Cl 4 (Joints)	-
Cl 4 (Butt Joint)	-
Cl 4.5 (Workmanship)	-
4.1.2 (sulphur)	-
4.1.2 (phosphorus)	-

Partial

-
-

568

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Heat Treatment)	-
Cl 9 (Tensile & Hardness)	-
Cl 10 (Diameter & Out Of Round)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Carbon)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Sulphur)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Phosphorous)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Manganese)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Silicon)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Aluminium)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Chromium)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Nickel)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Molybdenum)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Copper)	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11) (Niobium)	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11) (Titanium)	-

Partial

-
-

569

IS 12016 (1987)

Specification for cypermethrin EC

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point (Abel))	-
2.2.4 (Emulsion Stability)	-
2.3.1 (Cypermethrin content)	-
2.3.2 (Acidity)	-

Complete

-
-

570

IS 6003 (2010)

Indented Wire For--Prestressed Concrete ”

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 6.1.2 (Weight)	-
Cl 7.1 (Tensile Test On UTM)	-
Cl 7.2 (Tensile Test On UTM)	-
Cl 7.3 (Reverse Bend Test)	-
Cl 7.4 (Tensile Test On UTM)	-
4.1.1 (Phosphorus %)	-
4.1.1 (Sulphur %)	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List