BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

421

IS 4505 (2015)

Sodium formaldehyde sulphoxylate - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no 4.2 (Description )	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(ii) ] Annex A-2 Grade-1 & Grade 2 (Sodium formaldehyde bisulphate (NaHSO3.CH2O.H2O))	-
Cl no 4.3 [ Table 1, Sl no.(iii) ] Annex A-2 Grade-1 & Grade 2 (Sodium sulphite (Na2SO3))	-
Cl no 4.3 [ Table 1, Sl no.(iv) ] Annex A-3 Grade-1 & Grade 2 (pH (of 1 percent solution))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-1 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-2 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(vi) ] Ref to IS 12074 Grade-1 & Grade 2 (Lead (as Pb))	-
Cl no 4.3 [ Table 1, Sl no.(vii) ] Annex A-5 Grade-1 & Grade 2 (Copper (as Cu))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-1 (Zinc (as Zn))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-2 (Zinc (as Zn))	-

Complete

-
-

422

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Classification, IS 60898-1)	-
4.3 (Classification, IS 60898-1)	-
4.4 (Classification, IS 60898-1)	-
4.5 (Classification, IS 60898-1)	-
4.5.1 (Classification, IS 60898-1)	-
4.5.2 (Classification, IS 60898-1)	-
4.6 (Classification, IS 60898-1)	-
4.7 (Classification, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
8.1.1 (General, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-

Partial

-
-

423

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (C -IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (S - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (P - IS 228 )	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Mn - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Al - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Si - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Cu - IS 228)	-

Partial

-
-

424

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 8.4.1.1 (Sulphur)	-
Clause 8.4.1.1 (Phosphorus)	-
Clause 8.4.1.1 (Carbon)	-
Cl 4 (Types of Wheeled Fire Extinguishers)	-
Cl 5.3 (Fill Density)	-
Cl 5.4 (Filling Tolerance)	-
Cl 5.5.1 (Nominal Charge)	-
Cl 6.1 (Operating Temperature)	-
Cl 6.2.1 (Effective Discharge Time)	-
Cl 6.2.2 (Bulk Range)	-
Cl 6.3 (Resistance To Temperature Changes)	-
Cl 6.5 (Intermittent Discharge Test)	-
Cl 7.5.1 (Resistance to Impact)	-
Cl 7.7 (Tapping Test)	-
Cl 7.8 (Intermittent Discharge Test)	-
Cl 9.1 (High Pressure Extinguishers)	-
Cl 9.1.1 (Pressure Cycling Test)	-
Cl 9.2 (Low Pressure Extinguishers)	-
Cl 9.2.5 (Welded Low Carbon Steel Cylinder)	-
Cl 9.2.6 (Stainless Steel Cylinder)	-
Cl 9.2.7 (Aluminium Cylinder)	-
Cl 9.3 (Carrying Handle)	-
Cl 9.4 (Mounting)	-
Cl 9.5 (Caps, Valves and Closures)	-
Cl 9.9 (Hose Assemblies)	-
Cl 9.11 (Safety Locking Devices)	-
Cl 9.13 (Water Based Extinguishers)	-
Cl 9.14 (Special Requirements for CO2 Extinguishers)	-
Cl 10.1 (Colour)	-

Partial

-
-

425

IS 16011 (2012)

Aluminium and aluminium alloy foil for pharmaceutical packaging - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Al - IS 504)	-
7.1 (Cu - IS 504)	-
7.1 (Mn - IS 504)	-
7.1 (Si - IS 504)	-
7.1 (Fe- IS 504)	-
7.1 (Zn- IS 504)	-
7.1 (Cr- IS 504)	-
7.1 (Ti- IS 504)	-

Partial

-
-

426

IS 15962 (2012)

Structural steels for buildings and structures with improved seismic resistance

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clauses 7, 8.1 & .2, Table- 1 (E250S, C)	-
Clauses 7, 8.1 & .2, Table- 1 (E300S, S)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, P)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, Mn )	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, Si)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, CE)	-

Partial

-
-

427

IS 15660 (2017)

Refillable transportable seamless aluminium alloy gas cylinders - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1,5.2.1,5.2.2, Table-1 (Silicon)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Iron)	-
5.1.1,5.2.1,5.2.2, Table-1 (Copper)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Manganese)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Manesium)	-
5.1.1,5.2.1,5.2.2, Table-1 (Chromium)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Nickel)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Zinc)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Titanium)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Zirconium)	-
5.1.1,5.2.1,5.2.2, Table-1 ( Lead)	-

Partial

-
-

428

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking)	-
6.3 (Standard Mark on Conduit)	-
6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.2 (Maximum and minimum outside diameter of conduit)	-
7.2 (Minimum inside diameter of conduit)	-
7.3 (Length of conduit)	-
7.4 (Unifomity of The wall Thickness)	-
8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-
9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
10 (Resistance to Heat -Ball presure test)	-
11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-

Complete

-
-

429

IS 15542 (2005)

Power - Operated chaff cutter - Safety requirements

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1, Table-1 (Carbon)	-
Cl.4.1, Table-1 (Sulphur)	-
Cl.4.1, Table-1 (Phosphorus)	-
Cl.4.1, Table-1 (Manganese)	-
Cl.4.1, Table-1 (Nitrogen)	-

Partial

-
-

430

IS 15490 (2017)

Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1,5.2.2,5.3 (Carbon)	-
5.2.1,5.2.2,5.3 (Sulphur)	-
5.2.1,5.2.2,5.3 (Phosphorus)	-
5.2.1,5.2.2,5.3 (Manganese)	-
5.2.1,5.2.2,5.3 (Silicon)	-
5.2.1,5.2.2,5.3 (Chromium)	-
5.2.1,5.2.2,5.3 (Nickle )	-
5.2.1,5.2.2,5.3 (molybdenum)	-
5.2.1,5.2.2,5.3 (Sulphur and phosphorus)	-

Partial

-
-

431

IS 15103 (2002)

Fire resistant steel - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, C)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Si)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Mn)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, P)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, S)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Cr)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Mo)	-

Partial

-
-

432

IS 14756 (2017)

Stainless steel cookware - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Silicon)	-
3.1 & Table 1 of IS 5522 (Manganese)	-
3.1 & Table 1 of IS 5522 (Nickel)	-
3.1 & Table 1 of IS 5522 (Chromium)	-
3.1 & Table 1 of IS 5522 (Sulphur)	-
3.1 & Table 1 of IS 5522 (Phosphorus)	-
3.1 & Table 1 of IS 5522 (Copper)	-
3.1 & Table 1 of IS 5522 (Nitrogen)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Silicon)	-
3.1 & Table 1 of IS 5522 (Manganese)	-
3.1 & Table 1 of IS 5522 (Nickel)	-
3.1 & Table 1 of IS 5522 (Chromium)	-
3.1 & Table 1 of IS 5522 (Sulphur)	-
3.1 & Table 1 of IS 5522 (Phosphorus)	-
3.1 & Table 1 of IS 5522 (Copper)	-
3.1 & Table 1 of IS 5522 (Nitrogen)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Carbon)	-
3.1 & Table 1 of IS 5522 (Silicon)	-
3.1 & Table 1 of IS 5522 (Manganese)	-
3.1 & Table 1 of IS 5522 (Nickel)	-
3.1 & Table 1 of IS 5522 (Chromium)	-
3.1 & Table 1 of IS 5522 (Sulphur)	-
3.1 & Table 1 of IS 5522 (Phosphorus)	-
3.1 & Table 1 of IS 5522 (Copper)	-
3.1 & Table 1 of IS 5522 (Nitrogen)	-
3.1 & Table 1 of IS 5522 (Carbon)	-

Partial

-
-

433

IS 14652 (1999)

18 percent nickel maraging steel bars and rods - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Carbon-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Sulphur-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Phosphorous-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Manganese-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Silicon-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Chromium-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Copper-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Nickel-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Cobalt-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Molybdenum-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Titanium-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Aluminium-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Iron-Method mutually agreed between supplier & purchaser)	-

Partial

-
-

434

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

435

IS 14491 (1997)

Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 & 7.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Titanium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Vanadium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Niobium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

436

IS 14331 (1995)

Steels for high temperature bolting applications - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1, 4.1,4.2 & 4.3 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
1, 4.1,4.2 & 4.3 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
1, 4.1,4.2 & 4.3 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
1, 4.1,4.2 & 4.3 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
1, 4.1,4.2 & 4.3 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

437

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 ( Copper Cooduetor)	-
3.2 (Aluminium conductor)	-
4.1 (INSULATION : lnsulation for General Service)	-
4.2 (INSULATION : Heat Resisting insulation)	-
4.3 (INSULATION : Silicone Rubber Insulation)	-
5.1 (TAPE : Proofed Tape)	-
5.2 (TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-
5.3 (TAPE : Giass Tape)	-
6.1 (FILLERS : )	-
7.1 (BRAID : Textile Braid)	-
8.1 (SHEATH : General Service Insulated Cables and Flexible Cords)	-
8.2 (SHEATH :Heat Resisting Insulated Cables)	-
10 ( Conductor )	-
12.2 (Insulation : Thickness of Insufatien)	-
11 (Separator tape)	-
12.2 (Insulation : Thickness of Insufatien)	-
12.4 (Insulation : Allplication of Insulation)	-
13 (CORE IDENTiFICATlON)	-
14 (Tape)	-
15 (BRAIDING)	-
16 (COMPOUNDING AND VARNISHING)	-
17 (LAYING UP OF CORES)	-
18 ( Binder tape)	-
19.2 (Sheath : Thickness of Sheath)	-
19.4 ( Sheath :Colour)	-
20 ( Overall diameter)	-
21. (a) (Persulphate tests (for copper))	-
21. (b) (Annealing Test (for coper))	-
21. (c) ( Tensile Test (for aluminium))	-
21. (d) ( Wrapping Test (for aluminium))	-
21. (e) (Conductor Resistance )	-
21.1 ( Tensile strength )	-
22.1 ( Elongation)	-
21.1 (type test : Ageing In air oven)	-
21.1 (type test : Ageing in air bomb)	-
21.1 (type test : Ageing In oxygen bomb)	-
21.1 (type test : Hot set elongation)	-
21.1 ( Tensile strength )	-
22.1 ( Elongation)	-
21.1 (type test : Ageing In air oven)	-
21.1 (type test : Ageing in air bomb)	-
21.1 (type test : Tear resistance )	-
21.1 (type test : Hot set elongation)	-
22.2 (type test :Insulauon resistance High voltage (water immersron ) test)	-
22.2 (type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-
23 (identification)	-

Partial

-
-

438

IS 13114 (1991)

forged brass gate, globe and check valves for water works purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 8.1 and 9 ((Composition of Brass)Lead brass)	-
Clause 8.1 and 9 ((Composition of Brass)lead Mn Brass)	-
Clause 8.1 and 9 ((Composition of Brass)lead Mn Brass)	-
6.2 (Gate Valves)	-
6.3 (Globe valves)	-
6.4 (Check valves)	-
7, Table- 2 (Dimensions and Tolerances)	-

Partial

-
-

439

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Type)	-
6 (Thickness of sheet/strip)	-
6 (Depth of bowl)	-
6 (Internal dimensions of the bowl)	-
6 (Bowl locating limits)	-
6 (Co-ordinating sizes)	-
7.1 (Consruction and workmanship)	-
7.3 (Drainers)	-
7.4 (Waste outlet)	-
7.5 (Tap holes)	-
7.6 (Overflows)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Carbon Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Sulphur Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Phouphorous Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Manganese Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Silicon Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nitrogen Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Chromium Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nickel Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Carbon Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Sulphur Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Phouphorous Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Manganese Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Silicon Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Nitrogen Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Chromium Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Nickel Content)	-

Complete

-
-

440

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975)	-
2.1.1 (Type and Desiganation)	-
2.1.2 (Type and Desiganation)	-
3.1 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
3.2 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
3.3 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
3.4 (General Requirments,as per IS 7809 (Part 1 ) :1975 )	-
4.1 (Performance Requirments)	-
4.2 (Performance Requirments)	-
4.3 (Performance Requirments)	-
4.4 (Performance Requirments)	-
4.5 (Performance Requirments)	-
4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-
4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-
4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-
4.7 (Electrolytic corrosion)	-
4.8 (Stability to accelerated ageing )	-
4.9 (Insulation resistance test)	-
3.1 ( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 ( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-
3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975)	-

Partial

-
-

441

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
7 (Classification (as per Cl.6 of IS 302-2-80 :2017))	-
8.1 (Marking (as per Cl. 7 of IS 302-2-80:2017))	-
8.1,a (Marking )	-
8.1,b (Marking )	-
8.1,c (Marking )	-
8.1,d (Marking )	-
8.1,e (Marking )	-
8.1,f (Marking )	-
8.1,g (Marking )	-
8.2 (Marking )	-
8.3,a (Marking )	-
8.3,b (Marking )	-
8.3,c (Marking )	-
8.3,d (Marking )	-
8.3,e (Marking )	-
8.4 (Marking )	-
8 (Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-
8 (Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-
8 (Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-
8 (Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-
6.2 (Rating)	-
9 (Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-
9 (Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 ( Heating (as per Cl.11 of IS 302-2-80 :2017))	-
9 (Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-
9 (Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-
9 (Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-
9 (Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-
9 (Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-
9 (Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-
9 (Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-
9 (Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-
9 (Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-
9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-
9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-
9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-
9 (Components (as per Cl.24.103 of IS 302-2-80 :2017))	-
9 (Components (as per Cl.24.104 of IS 302-2-80 :2017))	-
9 (Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-
9 (Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-
9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-
9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-
9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-
9 (Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-
9 (Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-
9 (Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-
9 (Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-
9 (Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-
10.1 (Speed Regulators)	-
10.2 (Speed Regulators)	-
10.2 (Speed Regulators)	-
10.2 (Speed Regulators)	-
10.4 (Speed Regulators)	-
10.5 (Speed Regulators)	-
10.6 (Speed Regulators)	-
11.1 (Starting)	-
12 (Interchangeability)	-
14.4 (Measurement of Speed of the Fan )	-
14.4 (Measurement of Speed of the Fan )	-
14.5 (Measurement of Power factor and Power Input)	-
14.5 (Measurement of Power factor and Power Input)	-
16 (Endurance Test)	-
16 (Endurance Test)	-
9 (Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-
16 (Endurance Test)	-

Partial

-
-

442

IS 2745 (1983)

Specification for non - Metal helmet for firemen and civil defence personnel (Second Revision)

- View breakup
Rs.1500/- excluding shock absorption test, penetration resistance test, strength of retention system, water absorption test and firing test (Optional) and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Shell, Protective padding, Retention System & Neck protector)	-
Cl 5 ( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-
Cl 6 (Workmanship & Finish)	-
Cl 7 (Mass)	-

Partial

-
-

443

IS 9562 (1980)

Specification for non - Metal helmet for police force

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Shell, Protective padding & Retention System)	-
Cl 5 ( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-
Cl 6 (Workmanship & Finish)	-
Cl 7 (Mass)	-

Partial

-
-

444

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

- View breakup
Rs 7770/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Shell)	-
3.3 (Metal Parts)	-
4.1 (Sizes)	-
5.1 (Shell)	-
5.2 (Harness)	-
5.3 (Chin Strap or Nape Strap)	-
6.1 (Workmanship & Finish)	-
7.1 (Mass)	-
8.1 (Shock Absorption Resistance)	-
8.2 (Penetration Resistance)	-
8.4 (Electrical Resistance)	-
8.5 (Water Absorption)	-
8.6 (Heat Resistance)	-

Complete

-
-

445

IS 4151 (1993.0)

Protective helmets for motorcycle riders - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shell)	-
4.5 (Metal Parts)	-
6.1 (General)	-
6.2 (Shell)	-
6.3 (Protactive Padding)	-
6.4 (Retention System)	-
6.7 (Peripheral Vision)	-
6.8 (Workmanship and Finish)	-
7.2 (Impact Absorption Test)	-
7.3 (Rigidity Test)	-
7.4 (Projections and Surface Friction Test)	-
7.5 (Dynamic Test of Retention System)	-
7.6 (Audibility Test)	-
7.7 (Retention Test of Helmet)	-
7.8 (Micro-Slip Test of the Chin Strap)	-
7.9 (Test for Resistance to Abrasion of the Chin Strap )	-
7.10.2 (Ease of Release)	-
7.10.3 (Durability of Quick Release Mechanism)	-

Complete

-
-

446

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5 Table 1(i) (Main Chemical constituent-Sodium/Potassium bicarbonate )	-
Clause 5 Table 1(iii) (Apparent density (Declared value by the manufacturer))	-
Clause 5 Table 1(iv) (Particle size / sieve analysis (Declared value by the manufacturer))	-

Partial

-
-

447

IS 12367 (1988)

Specification for cold - Rolled carbon steel strips/coils for manufacture of welded tubes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 & 4.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

448

IS 12337 (1988)

Specification for manually operated fertilizer broadcaster

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1, Table-1 (Carbon)	-
Cl.3.1, Table-1 (Sulphur)	-
Cl.3.1, Table-1 (Phosphorus)	-
Cl.3.1, Table-1 (Manganese)	-
Cl.3.1, Table-1 (Silicon)	-
Cl.3.1, Table-1 (Aluminium)	-

Partial

-
-

449

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

450

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5 (pH of Aqueous Extract )	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List