BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

361

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 (Classification)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.4 (Marking and Instructions)	-
Cl.7.5 (Marking and Instructions)	-
Cl.7.6 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.8 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.9 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.10 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.11 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2009 (Marking and Instructions)	-
Cl.7.13 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.14 of IS302-1:2008 (Marking and Instructions)	-
Cl.7.14 (Marking and Instructions)	-
Cl.7.14 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.101 (Marking and Instructions)	-
Cl.8 & IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10 & IS:302-1:2008 (Power Input and Current)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11.8 (Heating)	-
Cl.11.8 (Heating)	-
Cl.11.8 (Heating)	-
Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. )	-
Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. )	-
Cl.15 & IS: 302-1:2008 (Moisture Resistance )	-
Cl.15.3 of IS 302-1:200 (Moisture Resistance )	-
Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.18 (Endurance. )	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19.101 (Abnormal Operation.)	-
Cl.19.102 (Abnormal Operation.)	-
Cl.19.103 (Abnormal Operation.)	-
Cl.19.104 (Abnormal Operation.)	-
Cl.19.105 (Abnormal Operation.)	-
Cl.19.106 (Abnormal Operation.)	-
Table 8 of IS 302-1:2008 (Abnormal Operation.)	-
Cl.19.107 (Abnormal Operation.)	-
Cl.19.108 (Abnormal Operation.)	-
Cl.19.109 (Abnormal Operation.)	-
Cl.19.110 (Abnormal Operation.)	-
Cl.19.111 (Abnormal Operation.)	-
Cl.19.114 (Abnormal Operation.)	-
Cl.20 & IS:302-1:2008 (Stability & Mechanical Hazards)	-
Cl.21 & IS:302-1:2008) (Mechanical Strength.)	-
Cl.21.2 of IS 302-1:2008 (Mechanical Strength.)	-
Cl.21.101 (Mechanical Strength.)	-
Cl.21.102 (Mechanical Strength.)	-
Cl.21.103 (Mechanical Strength.)	-
Cl.22.1 of IS 302-1:2008 (Construction)	-
Cl.22.5 of IS 302-1:2008 (Construction)	-
Cl.22.6 of IS 302-1:2008 (Construction)	-
Cl.22.7 of IS 302-1:2008 (Construction)	-
Cl.22.8 of IS 302-1:2008 (Construction)	-
Cl.22.9 of IS 302-1:2008 (Construction)	-
Cl.22.11 (Construction)	-
Cl.22.12 of IS 302-1:2008 (Construction)	-
Cl.22.13 of IS 302-1:2008 (Construction)	-
Cl.22.14 of IS 302-1:2008 (Construction)	-
Cl.22.15 of IS 302-1:2008 (Construction)	-
Cl.22.18 of IS 302-1:2008 (Construction)	-
Cl.22.20 of IS 302-1:2008 (Construction)	-
Cl.22.21 of IS 302-1:2008 (Construction)	-
Cl.23 & IS:302-1:2008 (Internal Wiring )	-
Cl.23.4 & Cl.29 of 302-1:2008 (Internal Wiring )	-
Cl.23.5 of 302-1:2008 (Internal Wiring )	-
Cl.23.7 of 302-1:2008 (Internal Wiring )	-
C.23.7 of 302-1:2008 (Internal Wiring )	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
C.24.1.4 (Component)	-
C.24.2 of 302-1:2008 (Component)	-
Cl.24.10 (Component)	-
Cl.25.1 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.2 of IS 3021:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.3 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.4 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.5 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.6 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.7. (Supply Connection and External Flexible Cords )	-
Cl.25.8 (Supply Connection and External Flexible Cords )	-
Cl. 25.9 (Supply Connection and External Flexible Cords )	-
Cl.25.10 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.11 (Supply Connection and External Flexible Cords )	-
Cl. 25.12 (Supply Connection and External Flexible Cords )	-
Cl. 25.13 (Supply Connection and External Flexible Cords )	-
Cl.25.14 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.15 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.17 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.18 (Supply Connection and External Flexible Cords )	-
Cl.25.20 (Supply Connection and External Flexible Cords )	-
Cl.26.1 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.26.10 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.26.11 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.27.1 of 302-1:2008 (Provision for Earthing.)	-
Cl.27.5 of 302-1:2008 (Provision for Earthing.)	-
Cl.28 of 302-1:2008 (Screws and Connections.)	-
Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.30 & IS:302-1:2008 (Resistance to Heat and Fire)	-
Cl.30.2.2 of 302-1:2008 (Resistance to Heat and Fire)	-
Cl.31 & IS:302-1:2008 (Resistance to Rusting.)	-
Cl.32 & IS:302-1:2008 (Radition,Toxicity and similar Hazards.)	-

Partial

-
-

362

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1 (Conductor)	-
Cl.4 (Material)	-
Cl.5.1.1 (Dimensions)	-
Cl. 6 (Annealing Test)	-
Cl 6 (Resistance Test)	-
Cl.4.1 (Insulation )	-
Cl.4.2 (Application)	-
Cl.4.3 (Colour)	-
Cl.4.4 (Overall Diameter)	-
Cl.4.5 (Finish)	-
Cl.4.6 (High Voltage Test Water Immersion )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test )	-
Cl.3.2 (Dielectric Material )	-

Complete

-
-

363

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Marking and instructions)	-
8.1.1 (Protection against live parts in all positions)	-
8.1.2 (Protection against live parts in openings)	-
8.1.3 (Protection against live parts in visible glowing heating elements)	-
8.1.4 (Protection against live parts against protective impedance)	-
9 (Starting of motor operation test requirements and tests)	-
10.1 (Power input)	-
10.2 (Current input)	-
11.1 (General)	-
11.2 (General)	-
11.3 (Heating)	-
13.1 (General)	-
13.2 (Leakage current at operating temperature)	-
13.3 (Electric Strength at operating temperature)	-
15.1 (Ingress Protection test other than IPX0 (IP test))	-
15.2 (Spillage Test)	-
15.3 (Humidity Test)	-
16.0 (General)	-
16.1 (General)	-
16.2 (Leakage Current (after Clause 15))	-
16.3 (Electric Strength (after clause 15 and 16.2))	-
19 (Abnormal Operation)	-
20 (Stability test)	-
21 (Mechanical Strength Test)	-
22 (Construction verification related test)	-
23 (General)	-
24 (Components)	-
25 (Supply connection and external flexible cords)	-
26 (Terminals for external conductors)	-
27 (Provision for earthing)	-
28 (Screw test and connections)	-
29 (clearance, creepage distances and solid insulation)	-
30.1 (Ball pressure test)	-
30.2 (Glow Wire Test)	-
30.2 (Needle Flame Test)	-
31 (Resistance to Rusting)	-
32 (Radiation Toxicity and Similar Hazards)	-

Partial

-
-

364

IS 15380 (2003)

Moulded Raised High Density Fibre (HDF) Panel Doors -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table-1 (dimension )	-
7.1 (Heavy duty (Construction))	-
7.2 (Light duty)	-
7.4 (Lipping )	-
7.5 (rebating )	-
9 (workmanship and finish)	-
11.1 (Dimension and squareness test)	-
11.2 (General flatness test)	-

Partial

-
-

365

IS 1551 (1991)

Carbon papers - Typewriters - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Description)	-
Cl. 5.2 (Base Paper)	-
Cl. 5.3 (Size)	-
Cl. 5.6 Table 1 S.No. ii) (Durability)	-
Cl. 5.6 Table 1 S.No. ii) (Coating)	-

Complete

-
-

366

IS 14490 (2018)

Plain copier paper - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2 (Moisture (IS 1060 (Part 5/Sec 2)).)	-
5.3 (Grammage IS 1060 (Part 5/Sec 5) & IS 1060 (Part 4/Sec 1))	-
5.4 (Thickness IS 1060 (Part 5/Sec 3).)	-
5.5 Table 1 iii (One minute cobb test, both sides IS 1060 (Part 5/Sec 4))	-
5.5 Table 1 v (Smoothness for both sides (Bendsten) 3 of IS 9894)	-
5.5 Table 1 vi (Ash content (at 900°C) 11 of IS 1060 (Part 1))	-
5.5 Table 1 viii a (Tear index Machine direction (MD) IS 1060 (Part 6/Sec 1))	-
5.5 Table 1 viii a (Tear index Cross direction (CD) IS 1060 (Part 6/Sec 1))	-
5.5 Table 1 ix a (Tensile index, Machine direction (MD) IS 1060 (Part 5/Sec 6))	-
5.5 Table 1 ix b (Tensile index,Cross direction (CD) IS 1060 (Part 5/Sec 6))	-

Partial

-
-

367

IS 12928 (1990)

Precipitated barium carbonate for ceramic and glass industry - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no 5.1 (Description )	-
Cl no 5.2 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1 (Barium ( as Ba ))	-
Cl no 5.2 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2 (Barium ( as Ba ))	-
Cl no 5.2 [ Table 1, Sl no.(ii) ] Annex A-3 Grade-1 (Volatile matter 105 ± 2°C)	-
Cl no 5.2 [ Table 1, Sl no.(ii) ] Annex A-3 Grade-2 (Volatile matter 105 ± 2°C)	-
Cl no 5.2 [ Table 1, Sl no.(iii) ] Annex A-4 Grade-1 ref to IS 12305 (Matter insoluble in hydrochloric acid)	-
Cl no 5.2 [ Table 1, Sl no.(iii) ] Annex A-4 Grade-2 ref to IS 12305 (Matter insoluble in hydrochloric acid)	-
Cl no 5.2 [ Table 1, Sl no.(iv) ] Annex A-5 Grade-2 only (Free alkali)	-
Cl no 5.2 [ Table 1, Sl no.(v) ] Annex A-6 Grade-1 (Water soluble sulphide ( as S ))	-
Cl no 5.2 [ Table 1, Sl no.(v) ] Annex A-6 Grade-2 (Water soluble sulphide ( as S ))	-
Cl no 5.2 [ Table 1, Sl no.(vi) ] Annex A-7 Grade-1 only (Sulphur ( as SO4 ))	-
Cl no 5.2 [ Table 1, Sl no.(vii) ] Annex A-8 Grade-1only (Alkali and other metal sulphates ( as BaSO4 ),)	-
Cl no 5.2 [ Table 1, Sl no.(viii) ] Annex A-9 Grade-1only (Sodium oxide ( as Na2O ))	-
Cl no 5.2 [ Table 1, Sl no.(ix) ] Annex A-10 Grade-1 & Grade-2 (Total iron ( as Fe2O3 ))	-
Cl no 5.2 [ Table 1, Sl no.(x) ] Annex A-11 Grade-1only (Tap density)	-
Cl no 5.2 [ Table 1, Sl no.(xi) ] Annex A-12 Grade-1 & Grade-2 (Residue retained on 63 micron IS Sieve)	-

Complete

-
-

368

IS 12766 (1997)

Paper, computer - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Grammage ( Substance ) )	-
4.5 (Size)	-
4.6 Table 1 S.no.i) (Bulk )	-
4.6 Table 1 S.no.ii) (Moisture)	-
4.6 Table 1 S.no.iii) (Ash,)	-
4.6 Table 1 S.no.iv) (Tesile Indec CD)	-
4.6 Table 1 S.no.iv) (Tesile Indec MD)	-
4.6 Table 1 S.no.v) (Burst index)	-
4.6 Table 1 S.no. vi ) (Tear Index Average of CD & MD)	-
4.6 Table 1 S.no. vii) (One minute cobb test)	-
4.6 Table 1 S.no. vi ) (Tear Index Average of CD & MD)	-
4.6 Table 1 S.no.x) (Smoothness)	-

Partial

-
-

369

IS 11744 (1986)

PecificatiOn for phosphorous pentachloride, technical

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no . 2.1 (Description)	-
Cl no . 2.2 APPENDIX A -2 [Table 1 Sl no. (i)] (Phosphorous pentachloride ( as PCl 5),)	-
Cl no . 2.2 APPENDIX A -3 Table 1 Sl no. (i)] (Bulk density)	-

Complete

-
-

370

IS 11673 : Part 2 (2019)

Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.3, Table-1, Sr.no. 1 (Relative density (at 25o/25oC))	-
Cl. 4.3, Table-1, Sr.no. 2 (Available Chlorine(as Cl2))	-
Cl. 4.3, Table-1, Sr.no. 3 (Total Chlorine(as Cl2))	-
Cl. 4.3, Table-1, Sr.no. 4 (Free alkali( as NaOH),)	-
Cl. 4.3, Table-1, Sr.no. 5 (Free Sodium Carbonate (as Na2CO3))	-
Cl. 4.3, Table-1, Sr.no. 6 (Iron (as Fe))	-
Cl. 4.3, Table-1, Sr.no. 7 (Sodium Chlorate ( as NaClO3),)	-
Cl. 4.3, Table-1, Sr.no. 8 (Lead (as Pb))	-
Cl. 4.3, Table-1, Sr.no. 9 (Arsenic (as As))	-
Cl. 4.3, Table-1, Sr.no. 10 (Mercury (as Hg))	-
Cl. 4.3, Table-1, Sr.no. 11 (Manganese (as Mn))	-
Cl. 4.3, Table-1, Sr.no. 12 (Total chromium (as Cr))	-
Cl. 4.3, Table-1, Sr.no. 13 (Cadmium (as Cd))	-
Cl. 4.3, Table-1, Sr.no. 14 (Selenium (as Se))	-

Complete

-
-

371

IS 11673 : Part 1 (2019)

Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 5.1 (Description Grade 1 & 2)	-
Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 1, Annex -A)	-
Cl. No. 5.3, table no. 1, Sl no. 1 (Relative density, Grade 2, Annex -A)	-
Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 1, Annex B)	-
Cl. No. 5.3, table no. 1, Sl no. 2 (Available chlorine (as Cl₂), Grade 2, Annex B)	-
Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 1, Annex C)	-
Cl. No. 5.3, table no. 1, Sl no. 3 (Total chlorine (as Cl₂), Grade 2, Annex C)	-
Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 1, Annex D)	-
Cl. No. 5.3, table no. 1, Sl no. 4 (Free alkali (as NaOH), Grade 2, Annex D)	-
Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 1, Annex E)	-
Cl. No. 5.3, table no. 1, Sl no. 5 (Free sodium carbonate (as Na₂CO₃), Grade 2, Annex E)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 1, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 6 (Iron (as Fe), Grade 2, Annex F)	-
Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 1, Annex G)	-
Cl. No. 5.3, table no. 1, Sl no. 7 (Sodium chlorate (as NaClO₃), Grade 2, Annex G)	-

Complete

-
-

372

IS 11087 (1986)

Specification for paper for magnetic ionk character recognition cheque printing (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description )	-
3.3 (Substance)	-
Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Smoothness)	-
Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Porosity)	-
Clause 3.6 Table 1; Sl. No. i,ii, iii, iv, v, vi. (Tearing strength)	-

Complete

-
-

373

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-

Complete

-
-

374

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Tapes – Width and Thickness ( IS 6192/IS 11197))	-
3.3.1 (Bottom seam (IS 10789))	-
4.1 and 3.4 (Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-
4.2 and Table 1 ii (Dimensions )	-
3.2 (Tapes – Width and Thickness ( IS 6192/IS 11197))	-
4.2 and Table 1 v (Mass of sack )	-

Partial

-
-

375

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-

Partial

-
-

376

IS 7320 (1974)

Specificaiton for concrete slump test apparatus

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (Internal Dimension of mould)	-
Fig 2(Cl3.1 to 3.3) (Construction)	-

Complete

-
-

377

IS 9157 (1979)

Specification for sodium nitrate and potassium nitrate for glass compositions

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 Table 1 i (Moisture and volatile matter)	-
3.2 Table 1 ii (Matter insoluble in water)	-
3.2 Table 1 iii (Carbonates)	-
3.2 Table 1 iv (Nitrites)	-
3.2 Table 1 v (Chlorides)	-
3.2 Table 1 vi (Sulphates)	-
3.2 Table 1 vii (Copper)	-
3.2 Table 1 viii (Iron)	-
3.2 Table 1 ix (Manganese)	-
3.2 Table 1 x (Potassium Compounds)	-
3.2 Table 1 xi (Sodium Compounds)	-
3.2 Table 1 xii (Sodium nitrate)	-
3.2 Table 1 xiii (Potassium nitrate)	-

Complete

-
-

378

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Freedom from defects)	-
9.0 (Pressure test)	-
6.0 (Shape)	-
7.0 (Cu)	-
7.0 (Sn)	-
7.0 (Pb)	-
7.0 (Ni)	-
7.0 (Fe)	-
7.0 (Al)	-
7.0 (Mn)	-
7.0 (Si)	-
7.0 (Total impurities excluding Ni Pb Al Zn)	-

Partial

-
-

379

IS 8887 (2018)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad RS-2) Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad MS) Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad SS-1) Annex 9)	-
6.6.2 Table-1; 1(i) (Residue on 600 micron IS Sieve, (Grad SS-2) Annex 9)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade RS-1) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade RS-2) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade MS) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade SS-1) Annex H)	-
6.6.2 Table-1; 1(viii) (Miscibility with water (Grade SS-2) Annex H)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade RS-1) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade RS-2) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade MS) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade SS-1) Annex J)	-
6.6.2 Table-1; 1(ix) 1 (Tests on residue: Residue by evaporation (Grade SS-2) Annex J)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade RS-1) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade RS-2) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade MS) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade SS-1) IS 1216)	-
6.6.2 Table-1; 1(ix) 4 (Tests on residue: Solubility I tricholoethylne, (Grade SS-2) IS 1216)	-

Partial

-
-

380

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Conductor : Material -IS : 8130-2013)	-
4.1 (Insulation : Material -IS : 5831-1984)	-
5.1 (Sheath : materail IS : 5831-1984)	-
6.1 (Conductor : Construction IS : 8130-2013)	-
7.1 (Insulation : Application )	-
7.2 (Thickness of Insulation - average )	-
7.2 (Thickness of Insulation - Min. )	-
7.3 (Colour of Insulation)	-
8.1 (Nominal radial thickness of sheath )	-
8.2 (Thickness of Sheath - min.)	-
8.3 (Colour of Sheath)	-
9.1 a) (Annealing test)	-
9.1 b) (Conductor resistance test)	-
9.1 d) i) (Insulation : Tensile strength)	-
9.1 d) i) (Insulation : elongation at break)	-
9.1 d) i) (Sheath : Tensile strength)	-
9.1 d) i) (Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation )	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break)	-
9.1 d) iii ) (Loss of mass test - insulation )	-
9.1 d) iii ) (Loss of mass test - Sheath )	-
9.1 d) iv ) (Hot deformation - insulation )	-
9.1 d) iv ) (Hot deformation - sheath )	-
9.1 d) v ) (Heat shock - insulation )	-
9.1 d) v ) (Heat shock - Sheath )	-
9.1 d) vi ) (Shrinkage - insulation )	-
9.1 d) vi ) (Shrinkage : Crack observed - insulation )	-
9.1 d) vi ) (Shrinkage - Sheath )	-
9.1 d) vi ) (Shrinkage: Crack observed - Sheath )	-
10.2 (Voltage test )	-
9.1 f) (Insulation resistance test: Volume resistivity )	-
9.1 f) (Insulation resistance test : IR constant)	-
10.4 (Flammability Test )	-
11.1 (Manufacturer’s Identification)	-

Complete

-
-

381

IS 5430 (2017)

Ammonia preserved concentrated natural rubber latex (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Colour)	-
4.2 (Odour)	-
4.3 ( Table 1) (1. Dry rubber content,(Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (2. Non-rubber solids ,(Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (3. Coagulum content, (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (4. Sludge content (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type HA) )	-
4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type MA)	-
4.3 ( Table 1) (5. Alkalinity as ammonia, ( Type LA) )	-
4.3 ( Table 1) (6. KOH number (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (7. Mechanical stability, (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (8. Volatile fatty acid number (Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (9. Copper content,(Type HA, Type MA, Type LA))	-
4.3 ( Table 1) (10. Manganese content (Type HA, Type MA, Type LA))	-

Complete

-
-

382

IS 2041 (2009)

Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Workmanship)	-
Cl 10 (Length, Width & Thickness)	-
Cl 12.1 (UTM)	-
Cl 12.2 (Press)	-
Cl 12.3 (Load Impact )	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Carbon-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Sulphur-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Phosphorous-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Manganese-IS228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Silicon-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Aluminium-IS 228)	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355) (Nitrogen- IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Niobium)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Vanadium)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Titanium)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Chromium-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Copper-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Molybdenum-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Nickel-IS 228)	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355) (Vanadium+Niobium+ Titanium)	-

Partial

-
-

383

IS 1856 (2005)

Steel wire ropes for haulage purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4- Tables 1 to 4 (Diameter)	-
5- Tables 1 to 4 (Breakiing Force of Rope with Fiber Core)	-
5- Tables 1 to 4 (Breakiing Force of Rope with Steel Core)	-
6.2.1 (Joints)	-
6.2.2 (Joints)	-
6.3 (Lay)	-
6.4- Tables 1 to 4 (Mass of Rope with Fiber core)	-
6.4- Tables 1 to 4 (Mass of Rope with Steel core)	-
6.5 (Preforming)	-
7 (Uniformity of Znic coating - IS 1835 & IS 2366)	-
7 (Mass of Znic Coating - IS 1835 & IS 6745)	-
Clause-7 (CARBON)	-
Clause-7 (SULPHUR)	-
Clause-7 (PHOSPHURS)	-
Clause-7 (MANGANESE)	-
Clause-7 (SILICON)	-
Clause-7 (ALUMINIUM)	-
Clause-7 (NITROGEN)	-

Partial

-
-

384

IS 4989 (2018)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1, Table 1, Sr. No. 1 (Visual Examination )	-
Cl. 4.1, Table 1, Sr. No. 2 (Freezing and thrawing)	-
Cl. 4.1, Table 1, Sr. No. 3 (pH (Original Sample))	-
Cl. 4.1, Table 1, Sr. No. 3 (pH (ageing Sample))	-
Cl. 4.1, Table 1, Sr. No. 4 (Miscibility with distilled water)	-
Cl. 4.1, Table 1, Sr. No. 7 (Sludge content)	-

Partial

-
-

385

IS 4835 (1979)

Specification Polyvinyl Acetate Dispersion Based Adhesives for Wood

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Solid Resin content, B-3)	-
Cl. 6.2 (Ash content, B-4)	-
Cl. 6.3 (pH value, B-5)	-
Cl. 6.4 (Bulk density, B-6)	-

Partial

-
-

386

IS 1759 (1986)

Specification for powrahs (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Shapes)	-
2.1 (Dimensions of Powrah-A)	-
2.1 (Dimensions of Powrah-B)	-
2.3 (Blade thickness)	-
4 (Mass)	-
6.1 (Workmanship & Finish)	-
10.1 (Drop test)	-

Partial

-
-

387

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (elec) (Freedom from defects)	-
13.2 (mech) (Visual Examination)	-
13.3 Table-1 (mech) (Diameter-Aluminium wires)	-
13.3 Table-2 (mech) (Diameter-Galvanized Steel wires)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Outermost Layer)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-
13.4 Table-4 (mech) (Lay Ratio- Steel Core (6 Wire Layer))	-
13.5.2 Table 1 (mech) (Breaking Load of Aluminium Wires Before Stranding)	-
13.5.2 Table 2 (mech) (Breaking Load of Steel Wires Before Stranding)	-
13.5.2 Table 1 (mech) (Breaking Load of Aluminium Wires After Stranding)	-
13.5.2 Table 2 (mech) (Breaking Load of Steel Wires After Stranding)	-
13.6.1 (mech) (Ductility by Torsion Test before stranding)	-
13.6.1 (mech) (Ductility by Torsion Test after stranding)	-
13.6.2 (mech) (Ductility by Elongation Test before stranding)	-
13.6.2 (mech) (Ductility by Elongation Test after stranding)	-
13.7.1 (mech) (Wrapping Test Aluminium Wires Before Stranding)	-
13.7.1 (mech) (Wrapping Test Aluminium Wires After Stranding)	-
13.7.2 (mech) (Wrapping Test Galvanized Steel Wires Before Stranding)	-
13.7.2 (mech) (Wrapping Test Galvanized Steel Wires After Stranding)	-
13.8 (elec) (Resistance test-Aluminium wire before Stranding)	-
14.8 (elec) (Resistance test-Aluminium wire after stranding)	-
13.9.2 (chem) (Mass of Zinc coating)	-
13.9.2 (chem) (Uniformity of Zinc coating)	-

Partial

-
-

388

IS 15155 (2002)

Bar/wire wrapped steel cylinder pipes with mortar lining and coating (Including Specials) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 10 ( WORKMANSHIP AND FINISH)	-

Complete

-
-

389

IS 1729 (2002)

Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Tensile Strrngth - IS1608(Pt-1))	-
5.1 (0.2 % proof stress - IS 1608(pt-1))	-
5.1 (Elongation - IS 1608(Pt-1))	-
5.3 (Casting Defects)	-
5.4 (Hardness- IS 1500)	-
6 (Hammer Test - IS1729)	-
8.2-Table 1 to 32 (Dimension, a)	-
8.2-Table 1 to 32 (Dimension, b)	-
8.2-Table 1 to 32 (Dimension, c)	-
11 (Coating Test at 65degree Celcius )	-
11 (Coating Test at 0degree Celcius )	-

Complete

-
-

390

IS 1538 (1993)

Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (The metal used for the manufacture of pipe shall be of a quality not less than that specified for grade FG 150 of IS 210 )	-
5.1 (tensile strength)	-
6.1 (Brinell hardness tests)	-
9.1,Table 2 & 3 (DI)	-
9.1,Table 2 & 3 (P)	-
9.1,Table 2 & 3 (g)	-
9.1&11.1,Table 10 to13 (Mass (Approx))	-
9.1&11.1,Table 15 (Mass (Approx))	-
12.1 to 12.7 (Coating )	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List