| 331 |
IS 10228 (1982) |
Specification for school bag |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 ( Dimensions-A) |
- |
|
|
|
| 3.1 (Dimensions-B) |
- |
|
|
|
| 3.1 (Dimensions-B1) |
- |
|
|
|
| 3.1 (Dimensions-C1) |
- |
|
|
|
| 3.1 (Dimensions-C2) |
- |
|
|
|
| 3.1 (Dimensions-C3) |
- |
|
|
|
| 3.1 (Dimensions-D) |
- |
|
|
|
| 3.1 (Dimensions-E) |
- |
|
|
|
| 3.1 (Dimensions-F) |
- |
|
|
|
| 3.1 (Dimensions-G) |
- |
|
|
|
| 3.1 (Dimensions-H) |
- |
|
|
|
| 3.1 (Dimensions-J) |
- |
|
|
|
| 3.1 (Dimensions-K) |
- |
|
|
|
| 3.1.1 (The length of back strap) |
- |
|
|
|
| 3.1.2 (The length of side strap) |
- |
|
|
|
| 5.1 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 5.2 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 5.3 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 5.4 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 5.4 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 5.5 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 5.5 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 5.6 (Manufacture, Workmanship & Finish) |
- |
|
|
|
| 7.1 ( Drop Test) |
- |
|
|
|
| 7.2 (Handle snatch test) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 332 |
IS 2465 (1984) |
Specification for cables for motor vehicles (Second Revision) |
- |
-
|
- View breakup
Single core PVC Insulated Unsheathed: Rs. 11030/- Single core PVC Insulated Sheathed: 75 % additional for sheath. Multi core with PVC Sheath: 75% additional for each additional core. Round and flat tinned copper braids without further covering for earthing: Rs. 1115/- Above charges are excluding Material tests, Ageing in oxygen bomb, Capacitance test, Ozone resistance test, Effect of heat on flexibility, Effect of oils, Effect of lubricating oil, brake fluid, diesel and petrol, Effect of cooling on flexibility.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Insulation) |
- |
|
|
|
| 7.3 (Insulation) |
- |
|
|
|
| 8 (Core Identification) |
- |
|
|
|
| 9 (Laying up of cores) |
- |
|
|
|
| 10.1.1 (Sheathing ) |
- |
|
|
|
| 10.2 (Sheathing ) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 3 & 6 (Conductor) |
- |
|
|
|
| 7.2, 10.3, 11 (Dimensions & thickness ) |
- |
|
|
|
| 7.2, 10.3, 11 (Dimensions & thickness ) |
- |
|
|
|
| 7.2, 10.3, 11 (Dimensions & thickness ) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 14 (High Voltage Test) |
- |
|
|
|
| 23.1 (Manufacturer's Identification) |
- |
|
|
|
| 23.1 (Manufacturer's Identification) |
- |
|
|
|
| 24.1 (PACKING AND MARKING) |
- |
|
|
|
| 24.2 (PACKING AND MARKING) |
- |
|
|
|
| 24.2.1 (PACKING AND MARKING) |
- |
|
|
|
| 4.2 & 12.1 (Physical tests for Insulation & Sheath) |
- |
|
|
|
| 20.3 (EFFECT OF LUBRICATING OIL) |
- |
|
|
|
| 20.3 (EFFECT OF LUBRICATING OIL) |
- |
|
|
|
| 20.3 (EFFECT OF BRAKE FLUID) |
- |
|
|
|
| 20.3 (EFFECT OF BRAKE FLUID) |
- |
|
|
|
| 20.3 (EFFECT OF DIESEL) |
- |
|
|
|
| 20.3 (EFFECT OF DIESEL) |
- |
|
|
|
| 20.3 (EFFECT OF PETROL) |
- |
|
|
|
| 20.3 (EFFECT OF PETROL) |
- |
|
|
|
| 22.1 (FLAMMABILITY TEST) |
- |
|
|
|
| 22.1 (FLAMMABILITY TEST) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 333 |
IS 6149 (1984) |
Specification for single - Ended open - Jaw adjustable wrenches (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2 (Type) |
- |
|
|
|
| 3 (Grades) |
- |
|
|
|
| 4 Table-1 (Dimensions- Nominal Size) |
- |
|
|
|
| 4 Table-1 (Dimensions- l) |
- |
|
|
|
| 4 Table-1 (Dimensions- s) |
- |
|
|
|
| 4 Table-1 (Dimensions- a) |
- |
|
|
|
| 4 Table-1 (Dimensions- b) |
- |
|
|
|
| 4 Table-1 (Dimensions- t) |
- |
|
|
|
| 4 Table-1 (Dimensions- d) |
- |
|
|
|
| 4 Table-1 (Dimensions- Opening of adjustable jaws) |
- |
|
|
|
| 6 (Hardness- Frame, handle and Jaw) |
- |
|
|
|
| 6 (Hardness- Worm) |
- |
|
|
|
| 6 (Hardness- Worm pin) |
- |
|
|
|
| 7 (Manufacture,Workmanship & Finish) |
- |
|
|
|
| 8 (Longitudinal Play of Adjustable Jaw) |
- |
|
|
|
| 8 (Transverse Play of Adjustable Jaw) |
- |
|
|
|
| 8 (Torque) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 334 |
IS 302 : Part 2 : Sec 201 (2008) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.6 of IS 302-‐2-‐201:2008 (Classification) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.8 of IS 302‐2-201: 2008 (Protection Against Access to Live Parts) |
- |
|
|
|
| Cl.10 of IS 302‐2‐201:2008 (Power Input and Current ) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.13 of IS 302-2-201: 2008 (Leakage Current & Electric Strength at Operating Temperature) |
- |
|
|
|
| Cl.15 of IS 302-2-201:2008 (Moisture Resistance ) |
- |
|
|
|
| Cl.15 of IS 302-2-201:2008 (Moisture Resistance ) |
- |
|
|
|
| Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.20 of IS 302-2-201: 2008 (Stability & Mechanical Hazards) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.26 of IS 302-2-201: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.28 of IS 302-2-201: 2008 (Screws & Connections ) |
- |
|
|
|
| Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation ) |
- |
|
|
|
| Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire ) |
- |
|
|
|
| Cl.31 of IS 302-2-201:2008 (Resistance of Rusting ) |
- |
|
|
|
| Cl.32 of IS 302-2-201:2008 (Radiation, Toxicity and Similar Hazards) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 335 |
IS 4508 (1992) |
Open ended slugging wrenches (Spanners) - specification (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (Dimensions- s) |
- |
|
|
|
| 3 (Dimensions- a) |
- |
|
|
|
| 3 (Dimensions- b) |
- |
|
|
|
| 3 (Dimensions- l) |
- |
|
|
|
| 5 (Hardness) |
- |
|
|
|
| 6 (Workmanship and Finish) |
- |
|
|
|
| 7 (PRESERVATION AND PACKING) |
- |
|
|
|
| 9 (Designation) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 336 |
IS 12640 : Part 1 (2016) |
Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 6 (Marking) |
- |
|
|
|
| 8.1.1 (General) |
- |
|
|
|
| 8.1.2 (Mechanism) |
- |
|
|
|
| 8.1.2 (Mechanism) |
- |
|
|
|
| 8.1.2 (Mechanism) |
- |
|
|
|
| 8.1.2 (Mechanism) |
- |
|
|
|
| 8.1.2 (Mechanism) |
- |
|
|
|
| 8.1.2 (Mechanism) |
- |
|
|
|
| 8.1.2 (Mechanism) |
- |
|
|
|
| 8.1.3 i) (Clearance ) |
- |
|
|
|
| 8.1.3 (Creepage distances) |
- |
|
|
|
| 9.4 (Test of reliability of screws, current carrying parts and connections ) |
- |
|
|
|
| 9.5 (Test of reliability of terminals
for external conductors) |
- |
|
|
|
| 9.6 (Protection against electric shock) |
- |
|
|
|
| 9.13 (Test of resistance to heat) |
- |
|
|
|
| 9.7.1 (Dielectric Properties : Resistance to humidity) |
- |
|
|
|
| 9.7.2 (Insulation resistance of main circuit) |
- |
|
|
|
| 9.7.1 (Dielectric Properties : Resistance to humidity) |
- |
|
|
|
| 9.8 (Test of Temperature rise) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 337 |
IS 1258 (2005) |
Bayonet lamp holders (Fourth Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 (Marking ) |
- |
|
|
|
| 8.2 (Marking ) |
- |
|
|
|
| 8.3 (Marking ) |
- |
|
|
|
| 8.4 (Marking ) |
- |
|
|
|
| 8.5 (Marking ) |
- |
|
|
|
| 8.6 (Marking ) |
- |
|
|
|
| 8.7 (Marking ) |
- |
|
|
|
| 8.8 (Marking ) |
- |
|
|
|
| 6 (Rating ) |
- |
|
|
|
| 6 (Rating ) |
- |
|
|
|
| 7 (Classification) |
- |
|
|
|
| 7.2 (Classification) |
- |
|
|
|
| 7.3 (Classification) |
- |
|
|
|
| 7.4 (Classification) |
- |
|
|
|
| 7.5 (Classification) |
- |
|
|
|
| 7.6 (Classification) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.1 (Dimensions) |
- |
|
|
|
| 9.2 (Dimensions) |
- |
|
|
|
| 9.3 (Dimensions) |
- |
|
|
|
| 10 (Protection against electric shock ) |
- |
|
|
|
| 11.1 (Terminals) |
- |
|
|
|
| 11.2 (Terminals) |
- |
|
|
|
| 11.3 (Terminals) |
- |
|
|
|
| 11.4 (Terminals) |
- |
|
|
|
| 12 (Provision for Earthing) |
- |
|
|
|
| 13.1 (Construction) |
- |
|
|
|
| 13.1 (Construction) |
- |
|
|
|
| 13.1 (Construction) |
- |
|
|
|
| 13.2 (Construction (Data Sheet No 7005-10& 7006-15A)) |
- |
|
|
|
| 13.3 (Construction ) |
- |
|
|
|
| 13.4 (Construction ) |
- |
|
|
|
| 13.5 (Construction) |
- |
|
|
|
| 13.2 ,13.6 & 13.7 (Construction) |
- |
|
|
|
| 13.2 ,13.6 & 13.8 (Construction) |
- |
|
|
|
| 13.11 (Construction) |
- |
|
|
|
| 14 (Construction) |
- |
|
|
|
| 15.1 (Moisture Resistance, Insulation Resistance and Electric Strength) |
- |
|
|
|
| 15.2 (Moisture Resistance, Insulation Resistance and Electric Strength) |
- |
|
|
|
| 15.3 (Moisture Resistance, Insulation Resistance and Electric Strength) |
- |
|
|
|
| 16.1 (Mechanical Strength) |
- |
|
|
|
| 16.1 (Mechanical Strength) |
- |
|
|
|
| 16.2 (Mechanical Strength) |
- |
|
|
|
| 16.3 (Mechanical Strength) |
- |
|
|
|
| 16.4 (Mechanical Strength) |
- |
|
|
|
| 16.5 (Mechanical Strength) |
- |
|
|
|
| 16.6 & Table - 6 (Mechanical Strength) |
- |
|
|
|
| 16.7 (Mechanical Strength) |
- |
|
|
|
| 16.8 (Mechanical Strength) |
- |
|
|
|
| 17 (Screws,current-carrying parts and connections) |
- |
|
|
|
| 18 (Creepage distances and Clearances) |
- |
|
|
|
| 18.1, Table 8 (Creepage distances and Clearances) |
- |
|
|
|
| 18.1, Table 8 (Creepage distances and Clearances) |
- |
|
|
|
| 18.1, Table 8 (Creepage distances and Clearances) |
- |
|
|
|
| 19.1 (General resistance to heat) |
- |
|
|
|
| 19.2 (General resistance to heat) |
- |
|
|
|
| 19.3 (General resistance to heat) |
- |
|
|
|
| 19.4 (Resistance to heat test) |
- |
|
|
|
| 20.1 (Resistance to heat, fire and tracking) |
- |
|
|
|
| 20.3 (Resistance to heat, fire and tracking) |
- |
|
|
|
| 20.4 (Resistance to heat, fire and tracking) |
- |
|
|
|
| 20.5 (Resistance to tracking) |
- |
|
|
|
| 21.1 (Resistance to excessive residual stresses and to rusting) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 338 |
IS 1783 : Part 2 (2014) |
Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 6 (Material) |
- |
|
|
|
| 7 (Construction) |
- |
|
|
|
| 7.3 (Construction) |
- |
|
|
|
| 7.7 (Construction) |
- |
|
|
|
| 8 (Finish ) |
- |
|
|
|
| 9.1 (Leakage at air pressure ) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 339 |
IS 14899 (2014) |
Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1.5 (Inner surface in tension) |
- |
|
|
|
| 10.1.5 (Outer surface in tension) |
- |
|
|
|
| 10.1.6 (Macroscopic Examination On Circumferential Weld ) |
- |
|
|
|
| 10.1.6 (Macroscopic Examination On longitudinal Weld) |
- |
|
|
|
| 10.1.6.1 (Macroscopic Examination, m1,Through valve boss ) |
- |
|
|
|
| 10.1.6.1 (Macroscopic Examination, m2,Through valve plate welds) |
- |
|
|
|
| 10.1.8 (Water Capacity) |
- |
|
|
|
| 10.2.1 (Hydrostatic stretch test) |
- |
|
|
|
| 10.2.2 (Burst test) |
- |
|
|
|
| 10.2.3.2 (Change in volume,) |
- |
|
|
|
| 10.2.3.3 (shall not cause any fragmentation ) |
- |
|
|
|
| 10.3 (Hydrostatic Test,3 MPa for 60 seconds ) |
- |
|
|
|
| 10.6.2 (Fatigue Test) |
- |
|
|
|
| 11 (Surface coating and colour) |
- |
|
|
|
| 10.1 (Macroscopic Examination) |
- |
|
|
|
| 10.3 (Hydrostatic Test,3 MPa for 60 seconds ) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 340 |
IS 1783 : Part 1 (2014) |
Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 6 (Material) |
- |
|
|
|
| 7.1 (Construction) |
- |
|
|
|
| 7.2 (Construction) |
- |
|
|
|
| 7.4 (Construction) |
- |
|
|
|
| 8 (Finish ) |
- |
|
|
|
| 9.1 (Leakage at air pressure ) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 341 |
IS 8978 (1992) |
Specification for electric instantaneous water heaters (Second Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.6 of IS 302-2-35:2017 (Classification) |
- |
|
|
|
| Cl.6 of IS 302-2-35:2017 (Classification) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.7 of IS 302-2-35:2017 (Marking) |
- |
|
|
|
| Cl.8 of IS 302-2-35:2017 (Protection Against Access To Live Parts) |
- |
|
|
|
| Cl.10 of IS 302-2- 35:2011 (Power Input & Current ) |
- |
|
|
|
| Cl.11 of 302-2-35:2017 (Heating) |
- |
|
|
|
| Cl.11 of 302-2-35:2017 (Heating) |
- |
|
|
|
| Cl.11 of 302-2-35:2017 (Heating) |
- |
|
|
|
| Cl.11 of 302-2-35:2017 (Heating) |
- |
|
|
|
| Cl.13 of IS 302-2-35:2017 (Leakage Current & Electrical Strength at Operating Temperature ) |
- |
|
|
|
| Cl.13 of IS 302-2-35:2017 (Leakage Current & Electrical Strength at Operating Temperature ) |
- |
|
|
|
| Cl.15 of IS 302-2-35-2011 (Moisture Resistance ) |
- |
|
|
|
| Cl.15 of IS 302-2-35-2011 (Moisture Resistance ) |
- |
|
|
|
| Cl.16 of IS 302-2-35:2011 (Leakage Current and Electric Strength) |
- |
|
|
|
| Cl.16 of IS 302-2-35:2011 (Leakage Current and Electric Strength) |
- |
|
|
|
| Cl.19 of IS 302-2-35:2017 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 302-2-35:2017 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 302-2-35:2017 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 302-2-35:2017 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 302-2-35:2017 (Abnormal Operation) |
- |
|
|
|
| Cl.20 of IS 302-2-35-2011 (Stability & Mechanical Hazards
) |
- |
|
|
|
| Cl.21.1 of IS 302-2-35-2011 (Mechanical strength) |
- |
|
|
|
| Cl. 21.2 of IS 302-1:2008 (Mechanical strength) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.22 of IS 302-2-35-2011 (Construction
) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors) |
- |
|
|
|
| Cl.27 of IS 302-2-35:2017 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 302-2-35:2017 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 302-2-35:2017 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 302-2-35:2017 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 302-2-35:2017 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 302-2-35:2017 (Provision for Earthing) |
- |
|
|
|
| Cl.28 of IS 302-2-35:2017 (Screws and Connections
) |
- |
|
|
|
| Cl.29 of IS 302-2-35:2017 (Clearances, Creepage Distances and Solid Insulation) |
- |
|
|
|
| Cl.29 of IS 302-2-35:2017 (Clearances, Creepage Distances and Solid Insulation) |
- |
|
|
|
| Cl.30 of IS 302-2-35: 2011 (Resistance to Heat and Fire) |
- |
|
|
|
| Cl.30 of IS 302-2-35: 2011 (Resistance to Heat and Fire) |
- |
|
|
|
| Cl.31 of IS 302-2-35: 2011 (Resistance to Rusting
) |
- |
|
|
|
| Cl.32 of IS 302-2-35: 2011 (Radiation, Toxicity and Similar Hazards
) |
- |
|
|
|
| Cl.10 of IS 8978 : 1992 (Finish) |
- |
|
|
|
| Cl.11 of IS 8978 : 1992 (Operation of flow switch) |
- |
|
|
|
| Cl.12 of IS 8978 : 1992 (Endurance) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 342 |
IS 14846 (2000) |
Sluice valve for water works purposes (50 To 1200 mm size) - specification |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Nominal Pressures) |
- |
|
|
|
| 5.1 (Nominal Sizes) |
- |
|
|
|
| 5.1.1 (Actual Bore) |
- |
|
|
|
| 7.2.2 (Manufacture - Bodies and Bonnets) |
- |
|
|
|
| 7.2.3 (Manufacture) |
- |
|
|
|
| 7.2.4 (Manufacture) |
- |
|
|
|
| 7.3 Table 3A 1 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 2 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 3 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 4 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 5 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 6 (Flanges) |
- |
|
|
|
| 7.4.1 (Wedges ) |
- |
|
|
|
| 7.4.1 (Wedges) |
- |
|
|
|
| 7.5 (Guides and Lugs) |
- |
|
|
|
| 7.5 (Guides and Lugs) |
- |
|
|
|
| 7.5.1 (Guides and Lugs) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,5 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.2 (Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.3 (Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.4 (Stem and Wedge Nuts) |
- |
|
|
|
| 7.9 (Height of Valve) |
- |
|
|
|
| 7.1 (Gears) |
- |
|
|
|
| 7.11 (Hand Wheel) |
- |
|
|
|
| 7.11 (Hand Wheel) |
- |
|
|
|
| 7.11 (Hand Wheel) |
- |
|
|
|
| 7.12 (Valve Caps) |
- |
|
|
|
| 7.12 (Valve Caps) |
- |
|
|
|
| 7.12 (Valve Caps) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.14 (By Pass Arrangements) |
- |
|
|
|
| 7.14 (By Pass Arrangements) |
- |
|
|
|
| 8 (Accessories or Optical Features) |
- |
|
|
|
| 9 (Coating) |
- |
|
|
|
| Cl.6, Table-1 (CARBON) |
- |
|
|
|
| Cl.6, Table-1 (SULPHUR) |
- |
|
|
|
| Cl.6, Table-1 (PHOSPHURS) |
- |
|
|
|
| Cl.6, Table-1 (MANGANESE) |
- |
|
|
|
| Cl.6, Table-1 (SILICON) |
- |
|
|
|
| Cl.6, Table-1 (ALUMINIUM) |
- |
|
|
|
| Cl.6, Table-1 (NITROGEN) |
- |
|
|
|
| Cl.6, Table-1 (CHROMIUM) |
- |
|
|
|
| Cl.6, Table-1 (NIOBIUM) |
- |
|
|
|
| Cl.6, Table-1 (NICKEL) |
- |
|
|
|
| Cl.6, Table-1 (VANADIUM) |
- |
|
|
|
| Cl.6, Table-1 (TITANIUM) |
- |
|
|
|
| Cl.6, Table-1 (MOLYBDENUM) |
- |
|
|
|
| Cl.6, Table-1 (ZINC) |
- |
|
|
|
| Cl.6, Table-1 (CADMIUM) |
- |
|
|
|
| Cl.6, Table-1 (IRON) |
- |
|
|
|
| Cl.6, Table-1 (TIN) |
- |
|
|
|
| Cl.6, Table-1 (COPPER) |
- |
|
|
|
| Cl.6, Table-1 (INDIUM) |
- |
|
|
|
| Cl.6, Table-1 (TOTAL IMPURITIES) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 343 |
IS 3725 (1966) |
Specification for resistance wires, tapes and strips for heating flements |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Physical Condition, IS 3725) |
- |
|
|
|
| 4.2 (Physical Dimensions, IS 3725) |
- |
|
|
|
| 4.2 (Physical Dimensions, IS 3725) |
- |
|
|
|
| 4.4 (Physical and Mechanical Properties, IS 3725) |
- |
|
|
|
| 4.4.1 (Physical and Mechanical Properties, IS 3725) |
- |
|
|
|
| 4.4.2 (Physical and Mechanical Properties, IS 3725) |
- |
|
|
|
| 4.4.3 (Physical and Mechanical Properties, IS 3725) |
- |
|
|
|
| 4.5 (Tensile Properties, IS 3725) |
- |
|
|
|
| 4.5 (Tensile Properties, IS 3725) |
- |
|
|
|
| 5.1 (Resistance, IS 3725) |
- |
|
|
|
| 5.2 (Uniformity of Resistance, IS 3725) |
- |
|
|
|
| 5.2.1 (Uniformity of Resistance, IS 3725) |
- |
|
|
|
| 7.3.1 (Wrapping Test- Round wire, IS 3725) |
- |
|
|
|
| 7.3.2 (Wrapping Test- Strips and tapes, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1 (Marking, IS 3725) |
- |
|
|
|
| 6.1.1 (Marking, IS 3725) |
- |
|
|
|
| 6.2 (Packing, IS 3725) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 344 |
IS 15652 (2006) |
Insulating mats for electrical purposes - Specification |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9 (Marking (As per Cl.9.1 of IS 15652 : 2006)) |
- |
|
|
|
| 9 (Marking (As per Cl.9.1 of IS 15652 : 2006)) |
- |
|
|
|
| 9 (Marking (As per Cl.9.1 of IS 15652 : 2006)) |
- |
|
|
|
| 9 (Marking (As per Cl.9.1 of IS 15652 : 2006)) |
- |
|
|
|
| 9 (Marking (As per Cl.9.2 of IS 15652 : 2006)) |
- |
|
|
|
| 10.a) (Packing) |
- |
|
|
|
| 10.b) (Packing) |
- |
|
|
|
| 10.c) (Packing) |
- |
|
|
|
| 4 (Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006)) |
- |
|
|
|
| 4 (Classification and Designation (As per Cl.4.2 of IS 15652 : 2006)) |
- |
|
|
|
| 4 (Classification and Designation (As per Cl.4.2 of IS 15652 : 2006)) |
- |
|
|
|
| 5 (Composition (As per Cl. 5.1 of IS 15652 : 2006)) |
- |
|
|
|
| 5 (Composition (As per Cl. 5.2 of IS 15652 : 2006)) |
- |
|
|
|
| 6 (Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006)) |
- |
|
|
|
| 6 (Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006)) |
- |
|
|
|
| 6 (Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006)) |
- |
|
|
|
| 6 (Colour (As per Cl. 6.4 of IS 15652 : 2006)) |
- |
|
|
|
| 7 (Workmanship & Finish (As per Cl. 7.1 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.3 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.3 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.5 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.5 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.5 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.5 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.5 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.5 of IS 15652 : 2006)) |
- |
|
|
|
| 8 (Physical properties (As per Cl.8.5 of IS 15652 : 2006)) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 345 |
IS 3745 (2006) |
Yoke type valve connections for small medical gas cylinders - Specification (Second Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1 i) (i)Tensile Strength ) |
- |
|
|
|
| 3.2.1 ii) ( Elongation) |
- |
|
|
|
| 3.2.2 (The izod impact strength) |
- |
|
|
|
| 5.1.2 (Stress Corrosion Testfor Copper Alloy Valve Bodies ) |
- |
|
|
|
| 5.3.1 (Types of ‘Valves and their Minimum Constructional Requirements) |
- |
|
|
|
| 5.3.3 (Types of ‘Valves and their Minimum Constructional Requirements) |
- |
|
|
|
| 5.3.4 (Types of ‘Valves and their Minimum Constructional Requirements) |
- |
|
|
|
| 5.3.6 (Types of ‘Valves and their Minimum Constructional Requirements) |
- |
|
|
|
| 6.1 Fig, 2 (BASIC “DIMENS1ONS FOR YOKE TYPE VALVE CONNECTIONS) |
- |
|
|
|
| 6.2 , Fig. 3. (BASIC “DIMENS1ONS FOR YOKE TYPE VALVE CONNECTIONS) |
- |
|
|
|
| 10 (HYDROSTATIC TESTS) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 346 |
IS 1879 (2010) |
Malleable cast iron pipe fittings - Specification (Third Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1 (Type of Fittings - IS 1879) |
- |
|
|
|
| 5.1.2 (Size designation - IS 1879) |
- |
|
|
|
| 5.1.2.1 (Equal fitting - IS 1879) |
- |
|
|
|
| 5.1.2.2 (Unequal fitting -IS 1879) |
- |
|
|
|
| 5.1.3 (Right and Left hand thread - IS 1879) |
- |
|
|
|
| 5.1.1 (Code Number -IS 1879) |
- |
|
|
|
| 6.1 (Tensile Strength - IS 14329) |
- |
|
|
|
| 6.1 (Elongation - Is 14329) |
- |
|
|
|
| 7.2- Table 2 (Wall thickness of fittings - IS 1879) |
- |
|
|
|
| 7.5 - Table 2 (Projection of Rainforcement - IS 1879) |
- |
|
|
|
| 7.5 - Table 3 (Width of Rainforcement - IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (a - IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (b - IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (c- IS 1879) |
- |
|
|
|
| 7.1 - Table 4 to Table 27 (d- IS 1879) |
- |
|
|
|
| 7.1 - Table 28 (d -IS 1879) |
- |
|
|
|
| 7.1 - Table 28 (D - IS 1879) |
- |
|
|
|
| 9 (Freedom from defects
) |
- |
|
|
|
| 10.i) (Mass of Galvanized coating ) |
- |
|
|
|
| 10.ii) ( Uniformity of Galvanized coating-IS 2633) |
- |
|
|
|
| 10.iii) (Adhesion of Galvanized coating IS 2629) |
- |
|
|
|
| 10.iv) (Freedom from defects IS 4759) |
- |
|
|
|
| 11 (Pressure Test) |
- |
|
|
|
| 12 (Compression Test) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 347 |
IS 2082 (2018) |
Stationary storage type electric water heaters - Specification (Fifth Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Classification ) |
- |
|
|
|
| 6 (Classification ) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| 7 (Marking) |
- |
|
|
|
| (Cl.8 of IS 302-2-21:2011) (Protection Against Access to Live Parts) |
- |
|
|
|
| (Cl.10 of IS 302-2-21: 2011) (Power Input & Current) |
- |
|
|
|
| (Cl.11 of 302-2-21:2011) (Heating) |
- |
|
|
|
| (Cl.11 of 302-2-21:2011) (Heating) |
- |
|
|
|
| (Cl.13 of IS 302-2-21:2011) (Leakage Current ) |
- |
|
|
|
| (Cl.13 of IS 302-2-21:2011) (Electrical Strength at Operating Temperature) |
- |
|
|
|
| (Cl.15 of IS 302-2-21-2011) (Moisture Resistance) |
- |
|
|
|
| (Cl.15 of IS 302-2-21-2011) (Moisture Resistance) |
- |
|
|
|
| (Cl.15 of IS 302-2-21-2011) (Moisture Resistance) |
- |
|
|
|
| (Cl.19 of IS 302-2-21:2011) (Abnormal Operation) |
- |
|
|
|
| (Cl.19 of IS 302-2-21:2011) (Abnormal Operation) |
- |
|
|
|
| (Cl.19 of IS 302-2-21:2011) (Abnormal Operation) |
- |
|
|
|
| (Cl.19 of IS 302-2-21:2011) (Abnormal Operation) |
- |
|
|
|
| (Cl.20 of IS 302-2-21:2011) (Stability & Mechanical Hazards) |
- |
|
|
|
| (Cl.21ofIS302-2-21:2011) (Mechanical strength) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl.22 Of
IS 302-2-21:2011) (Construction) |
- |
|
|
|
| (Cl. 23 of IS 302-2-21: 2011) (Internal Wiring
) |
- |
|
|
|
| (Cl. 23 of IS 302-2-21: 2011) (Internal Wiring
) |
- |
|
|
|
| (Cl. 23 of IS 302-2-21: 2011) (Internal Wiring
) |
- |
|
|
|
| (Cl. 23 of IS 302-2-21: 2011) (Internal Wiring
) |
- |
|
|
|
| (Cl. 23 of IS 302-2-21: 2011) (Internal Wiring
) |
- |
|
|
|
| (Cl. 23 of IS 302-2-21: 2011) (Internal Wiring
) |
- |
|
|
|
| (Cl.24ofIS302-221:2011) (Component) |
- |
|
|
|
| (Cl.24ofIS302-221:2011) (Component) |
- |
|
|
|
| (Cl.24ofIS302-221:2011) (Component) |
- |
|
|
|
| (Cl.24ofIS302-221:2011) (Component) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords) |
- |
|
|
|
| (Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors) |
- |
|
|
|
| (Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors) |
- |
|
|
|
| (Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors) |
- |
|
|
|
| (Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors) |
- |
|
|
|
| (Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors) |
- |
|
|
|
| (Cl.27 of IS 302-2-21:2011) (Provision for Earthing) |
- |
|
|
|
| (Cl.27 of IS 302-2-21:2011) (Provision for Earthing) |
- |
|
|
|
| (Cl.27 of IS 302-2-21:2011) (Provision for Earthing) |
- |
|
|
|
| (Cl.27 of IS 302-2-21:2011) (Provision for Earthing) |
- |
|
|
|
| (Cl.28 of IS 302-2-21:2011) (Screws & Connections) |
- |
|
|
|
| (Cl.29ofIS302-2-21:2011) (Clearances, Creepage Distances and Solid Insulation) |
- |
|
|
|
| (Cl.30 of IS 302-2-21:2011) (Resistance to Heat & Fire) |
- |
|
|
|
| (Cl.31 of IS 302-2-21:2011) (Resistance to Rusting) |
- |
|
|
|
| (Cl.15 of IS 2082:2018) (Verification of the Rated Capacity) |
- |
|
|
|
| (Cl.16 of IS 2082:2018) (Standing Loss per 24 Hours) |
- |
|
|
|
| (Cl.17 of IS 2082:2018) (Hot Water Output) |
- |
|
|
|
| (Cl.18 of IS 2082:2018) ( Reheating Time) |
- |
|
|
|
| (Cl.19 of IS 2082:2018) (Mixing Factor) |
- |
|
|
|
| (Cl.20 of IS 2082:2018) (Deviation of Dial Calibration) |
- |
|
|
|
| (Cl.21 of IS 2082:2018) (Cyclic Temperature Variation) |
- |
|
|
|
| (Cl.22 of IS 2082:2018) (Finish) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 348 |
IS 3196 : Part 4 (2001) |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases - Specification: Part 4 cylinders for toxic and corrosive gases |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 14 (Water Capacity) |
- |
|
|
|
| 15 (Hydrostatic test) |
- |
|
|
|
| 16 (Pneumatic Leakage Test) |
- |
|
|
|
| 17.2 (Bursting test) |
- |
|
|
|
| 18.1.3 (Face Bend Test,) |
- |
|
|
|
| 18.1.6 (Nicked bend test) |
- |
|
|
|
| 18.1.7 (Macro Examination) |
- |
|
|
|
| 8.4 (Agreed finished Thickness ) |
- |
|
|
|
| 20 (Colour Identification) |
- |
|
|
|
| 10.2 (Foot Ring) |
- |
|
|
|
| 10.2 (Foot ring) |
- |
|
|
|
| 10.2 (Foot ring) |
- |
|
|
|
| 9.3 (Valve Protection) |
- |
|
|
|
| 9.3 (Valve Protection) |
- |
|
|
|
| 15 (Hydrostatic test) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 349 |
IS 13095 (1991) |
Butterfly valves for general purposes |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (VALVE END CONNECTIONS) |
- |
|
|
|
| 5 (SERVICE APPLICATIONS) |
- |
|
|
|
| 6 ( NOMINAL SIZES ) |
- |
|
|
|
| 7 (NOMINAL PRESSURES) |
- |
|
|
|
| 7.2 (Class designations) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Flange-D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)-
Flange-b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)-
Rasied Face-d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)-
Rasied Face-f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Bolting ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Drilling -Nos. ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Drilling -d2) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Drilling -k) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Neck -d3) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
- Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)-
Neck- r) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Flange-D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Flange-b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Rasied Face-d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Rasied Face-f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Bolting) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Drilling -Nos. ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Drilling -d2 ) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Drilling -k) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Neck -d3) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)-
Neck-r) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Pipe O.D.- d1) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Flange - D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Flange - b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Raised Face - d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Raised Face - f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Bolting) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Drilling - Nos.) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Drilling -d2) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Drilling -k) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Flange -D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Flange - b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Raised Face - d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Raised Face - f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Bolting) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling - Nos.) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling -d2) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)-
Drilling -k) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Flange -D) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Flange - b) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Raised Face - d4) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Raised Face - f) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Bolting) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling - Nos.) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling -d2) |
- |
|
|
|
| 9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends)
-Integral Steel Flanges- IS 6392 (Table 15/21/26)-
Drilling -k) |
- |
|
|
|
| 9.1.1 ( Double Flanged Body Ends) |
- |
|
|
|
| 9.2.2 (Wafer Body Ends) |
- |
|
|
|
| 10.1 -Table1 (FACE TO FACE DIMENSIONS) |
- |
|
|
|
| 11 (Bodies) |
- |
|
|
|
| 12 (DISC AND SHAFT) |
- |
|
|
|
| 13 (SEATING AND LININGS) |
- |
|
|
|
| 16 (OPERATION) |
- |
|
|
|
| 17.1 (Performance Testing) |
- |
|
|
|
| 17.2 (Body Test) |
- |
|
|
|
| 17.3 (Seat Test) |
- |
|
|
|
| 17.4 (Disc Strength Test) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 350 |
IS 1554 : Part 2 (1988) |
Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (CONDUCTOR) |
- |
|
|
|
| 3.1.1 (CONDUCTOR) |
- |
|
|
|
| 4.1 (INSULATION) |
- |
|
|
|
| 5.1 (SCREENING) |
- |
|
|
|
| 6.1 (FILLERS AND INNER SHEATH) |
- |
|
|
|
| 6.2 (FILLERS AND INNER SHEATH) |
- |
|
|
|
| 7.1 (ARMOURING) |
- |
|
|
|
| 8.1 (OUTER SHEATH) |
- |
|
|
|
| 9.1 (CONDUCTOR) |
- |
|
|
|
| 9.2 (CONDUCTOR) |
- |
|
|
|
| 10.1 (CONDUCTOR SCREENING) |
- |
|
|
|
| 11.1 (INSULATION) |
- |
|
|
|
| 11.2 (INSULATION : Thickness of Insulation) |
- |
|
|
|
| 11.3 (INSULATION : Tolerance on Thickness of Insulation) |
- |
|
|
|
| 11.4 (INSULATION : Application of Insulation) |
- |
|
|
|
| 12.1 (INSULATION SCREENING) |
- |
|
|
|
| 13.1 (CORE IDENTIFICATION) |
- |
|
|
|
| 14.1 (LAYING UP OF CORES) |
- |
|
|
|
| 15.1 (INNER SHEATH (COMMON COVERING)) |
- |
|
|
|
| 15.2 (INNER SHEATH (COMMON COVERING)) |
- |
|
|
|
| 15.3 (INNER SHEATH (COMMON COVERING)) |
- |
|
|
|
| 15.4 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath) |
- |
|
|
|
| 16.1.1 (ARMOURING : Application) |
- |
|
|
|
| 16.1.2 (ARMOURING : Application) |
- |
|
|
|
| 16.1.3 (ARMOURING : Direction of lay ) |
- |
|
|
|
| 16.1.4 (ARMOURING : Application) |
- |
|
|
|
| 16.2.1 (ARMOURING : Type of Armour) |
- |
|
|
|
| 16.2.2 (ARMOURING : Type of Armour) |
- |
|
|
|
| 16.3 (Armouring : Dimensions -Wire Diameter) |
- |
|
|
|
| 16.3 (Armouring : Dimensions -Formed wire ) |
- |
|
|
|
| 16.4 (ARMOURING : Joints) |
- |
|
|
|
| 16.5 (ARMOURING : Resistance) |
- |
|
|
|
| 13.6 a) (ARMOURING: Tensile Strength) |
- |
|
|
|
| 13.6 b) (ARMOURING: Elongation ) |
- |
|
|
|
| 13.6 c) (ARMOURING: Torsion Test (For round wire ) ) |
- |
|
|
|
| 13.6 d) (ARMOURING: Winding Test(For formed wire)) |
- |
|
|
|
| 13.6 e) (ARMOURING: Uniformity of zinc coating) |
- |
|
|
|
| 13.6 f) (ARMOURING: Mass of zinc coating ) |
- |
|
|
|
| 13.6 g) (ARMOURING: Resistivity) |
- |
|
|
|
| 17.1 (OUTER SHEATH) |
- |
|
|
|
| 17.2 (OUTER SHEATH : colour ) |
- |
|
|
|
| 17.3.1 (Thickness of Outer Sheath : Unarmoured Cables) |
- |
|
|
|
| 17.3.2 (Thickness of Outer Sheath : Armoured Cables) |
- |
|
|
|
| 18.1 a) 1) (Tests on Conductor : Annealing test (for copper)) |
- |
|
|
|
| 18.1 a) 2) (Tensile test (for aluminium) - Before stranding ) |
- |
|
|
|
| 18.1 a) 2) (Tensile test (for aluminium) - After stranding ) |
- |
|
|
|
| 18.1 a) 3) (Tests on Conductor : Wrapping test ( for aluminium)) |
- |
|
|
|
| 18.1 a)4) (Tests on conductor : Conductor resistance test - Main conductor ) |
- |
|
|
|
| 18.1 a)4) (Resistance test - Neutral conductor ) |
- |
|
|
|
| 18.1 d) 1) (Phyaical tests for insulation : Tensile Test) |
- |
|
|
|
| 18.1 d) 1) (Phyaical tests for insulation : Elongation ) |
- |
|
|
|
| 18.1 d) 2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test) |
- |
|
|
|
| 18.1 d) 2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation ) |
- |
|
|
|
| 18.1 d) 2) (Phyaical tests for insulation - Ageing in air oven : Elongation ) |
- |
|
|
|
| 18.1 d) 2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 18.1 d) 1) (Physical tests for sheath : Tensile stregth ) |
- |
|
|
|
| 18.1 d) 1) (Physical tests for sheath : Elongation ) |
- |
|
|
|
| 18.1 d) 2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
|
|
|
| 18.1 d) 2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation ) |
- |
|
|
|
| 18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation ) |
- |
|
|
|
| 18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 18.1 d) 3) (Phyaical tests for insulation : Shrinkage ) |
- |
|
|
|
| 18.1 d) 3) (Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
|
|
|
| 18.1 d) 3) (Phyaical tests for Sheath : Shrinkage ) |
- |
|
|
|
| 18.1 d) 3) (Phyaical tests for Sheath : Shrinkage - Crack observed ) |
- |
|
|
|
| 18.1 d) 4) (Hot deformation : Insulation ) |
- |
|
|
|
| 18.1 d) 4) (Hot deformation : Sheath ) |
- |
|
|
|
| 18.1 d) 5) ( Loss of mass in air oven- Insulation ) |
- |
|
|
|
| 18.1 d) 5) ( Loss of mass in air oven- sheath ) |
- |
|
|
|
| 18.1 d) 6) (Heat shock test- Insulation ) |
- |
|
|
|
| 18.1 d) 6) (Heat shock test- sheath ) |
- |
|
|
|
| 18.1 d) 7) (Thermal stability- insulation ) |
- |
|
|
|
| 18.1 d) 7) (Thermal stability- Sheath ) |
- |
|
|
|
| 18.1 e) (Insulation resistance test : Volume Resistivity ) |
- |
|
|
|
| 18.1 e) (Insulation resistance test : IR Constant ) |
- |
|
|
|
| 19.7 (High voltage test) |
- |
|
|
|
| 19.8 (Flammability test) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 351 |
IS 1536 (2001) |
Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.2, annex-A (Tensile Test ( for pipes over 300mm)) |
- |
|
|
|
| 11.3 (Brinell Hardness Test) |
- |
|
|
|
| 12.1 (Hydrostatic Test) |
- |
|
|
|
| 13.3
Table 3 (DE) |
- |
|
|
|
| 13.3
Table 3 (DI) |
- |
|
|
|
| 13.3
Table 3 (p) |
- |
|
|
|
| 13.3
Table 3 (g) |
- |
|
|
|
| 13.3
Table 3 (h) |
- |
|
|
|
| 13.3
Table 3 (a(optional)) |
- |
|
|
|
| 13.3
Table 3 (K) |
- |
|
|
|
| 13.3
Table 3 (L) |
- |
|
|
|
| 13.3
Table 3 (M) |
- |
|
|
|
| 13.3
Table 3 (N) |
- |
|
|
|
| 13.3
Table 3 (f) |
- |
|
|
|
| 13.3
Table 4 (DE) |
- |
|
|
|
| 13.3
Table 4 (X) |
- |
|
|
|
| 13.3
Table 4 (DI) |
- |
|
|
|
| 13.3
Table 4 (P) |
- |
|
|
|
| 13.3
Table 4 (Q) |
- |
|
|
|
| 13.3
Table 4 (I) |
- |
|
|
|
| 13.3
Table 4 (J) |
- |
|
|
|
| 13.3
Table 4 (K) |
- |
|
|
|
| 13.3
Table 4 (N) |
- |
|
|
|
| 13.3
Table 4 (O) |
- |
|
|
|
| 13.3
Table 4 (S) |
- |
|
|
|
| 13.3
Table 4 (T) |
- |
|
|
|
| 13.3
Table 4 (L) |
- |
|
|
|
| 13.3
Table 4 (M) |
- |
|
|
|
| 13.4
Table 5 (c) |
- |
|
|
|
| 13.4
Table 5 (D) |
- |
|
|
|
| 13.4
Table 5 (E) |
- |
|
|
|
| 13.4
Table 5 (b) |
- |
|
|
|
| 13.4
Table 5 (a) |
- |
|
|
|
| 13.4
Table 5 (r) |
- |
|
|
|
| 13.4
Table 5 (f) |
- |
|
|
|
| 13.4
Table 5 (s) |
- |
|
|
|
| 13.4
Table 5 (Holes Number) |
- |
|
|
|
| 13.4
Table 5 (Holes Diameter) |
- |
|
|
|
| 13.4
Table 5 (Diameter of Bolts) |
- |
|
|
|
| 13.5
Table 6 to 8 (DE Lead joint) |
- |
|
|
|
| 13.5
Table 6 to 8 (DE Push on joint) |
- |
|
|
|
| 13.5
Table 6 to 8 (e) |
- |
|
|
|
| 13.6
Table 9 (DE) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 352 |
IS 4250 (1980) |
Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Classification- IS 302-1 ) |
- |
|
|
|
| 6 (Classification- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.2 (Marking) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.4 (Marking) |
- |
|
|
|
| 7.5 (Marking) |
- |
|
|
|
| 7.6 (Marking) |
- |
|
|
|
| 8 ( Protection Against Electric Shock, IS 302-1) |
- |
|
|
|
| 9 (Starting, IS 302-1) |
- |
|
|
|
| 10 (Power Input and Current, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
|
|
|
| 13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
|
|
|
| 15.1 (Moisture Resistance, IS 302-1) |
- |
|
|
|
| 15.2 (Moisture Resistance-Spillage test) |
- |
|
|
|
| 15 (Moisture Resistance, IS 302-1) |
- |
|
|
|
| 16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
|
|
|
| 16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
|
|
|
| 19 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 20 (Stability & Mechanical Hazards, IS 302-1) |
- |
|
|
|
| 20 (Stability & Mechanical Hazards, IS 302-1) |
- |
|
|
|
| 21 (Mechanical Strength, IS 302-1) |
- |
|
|
|
| 20 (Stability & Mechanical Hazards, IS 302-1) |
- |
|
|
|
| 21 (Mechanical Strength, IS 302-1) |
- |
|
|
|
| 21 (Mechanical Strength, IS 302-1) |
- |
|
|
|
| 22.1 (Construction, IS 302-1) |
- |
|
|
|
| 22.2 (Construction) |
- |
|
|
|
| 22.3 (Construction) |
- |
|
|
|
| 22.4 (Construction) |
- |
|
|
|
| 22.5 (Construction) |
- |
|
|
|
| 22.8 (Construction) |
- |
|
|
|
| 22.9 (Construction) |
- |
|
|
|
| 22.1 (Construction) |
- |
|
|
|
| 23 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 24.1 (Components, IS 302-1) |
- |
|
|
|
| 24.1 (Components, IS 302-1) |
- |
|
|
|
| 24.1 (Components, IS 302-1) |
- |
|
|
|
| 24.1 (Components, IS 302-1) |
- |
|
|
|
| 24.2 (Components) |
- |
|
|
|
| 24.5 (Components) |
- |
|
|
|
| 24.6 (Components) |
- |
|
|
|
| 24.7 (Components) |
- |
|
|
|
| 24.8 (Components) |
- |
|
|
|
| 24.9 (Components) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 26 (Terminals for External Conductors, IS 302-1) |
- |
|
|
|
| 27 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 28 (Screws & Connections, IS 302-1) |
- |
|
|
|
| 29 (Clearances and Distances through Insulation, IS 302-1) |
- |
|
|
|
| 29 (Clearances and Distances through Insulation, IS 302-1) |
- |
|
|
|
| 30 (Resistance to Heat, Fire, Tracking, IS 302-1) |
- |
|
|
|
| 31 (Resistance of Rusting, IS 302-1) |
- |
|
|
|
| 34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement)) |
- |
|
|
|
| 34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement)) |
- |
|
|
|
| 34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement)) |
- |
|
|
|
| 34.3 (Whisking egg whites ) |
- |
|
|
|
| 34.4 (IDLI batter-Grinding of black gram) |
- |
|
|
|
| 34.4 (IDLI batter-Grinding of rice) |
- |
|
|
|
| 34.4 (IDLI batter-Grinding of rice) |
- |
|
|
|
| 34.4 (IDLI batter-Grinding of rice) |
- |
|
|
|
| 34.5.1 (a) (Operational test for juicers ) |
- |
|
|
|
| 34.5.1 (b) (Operational test for juicers ) |
- |
|
|
|
| 34.5.2 (Operational test for juicers ) |
- |
|
|
|
| 35 (Temperature withstand test for bowl) |
- |
|
|
|
| 36 (Test for controls ) |
- |
|
|
|
| 37 (Strength of Assembly ) |
- |
|
|
|
| 37 (Strength of Assembly ) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 353 |
IS 362 (1991) |
Parliament Hinges -specification |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 7.1 (Brass parliament hinges shall have either bright or satin finish and shall be suitably protected against discoloration) |
- |
|
|
|
| Cl. 7.2 (Ref. Cl. 11.1 of IS 1868:1996) ( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance) |
- |
|
|
|
| Cl. 7.3 (Mild steel parliament hinges shall be finished bright or electro-galvanized as specified by the purchaser) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-A) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-B) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-C) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-D) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-d) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-E) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-No. of Screw holes) |
- |
|
|
|
| 5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Holes for screw designation) |
- |
|
|
|
| 6.1 (MANUFACTURE-General) |
- |
|
|
|
| 6.2 (MANUFACTURE-Knuckles) |
- |
|
|
|
| 6.3 (MANUFACTURE-Pins) |
- |
|
|
|
| 6.4 (MANUFACTURE-Screw Holes) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the ends of the flap) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the inner edge) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the ends of the flap) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes-minimum distance from
the inner edge) |
- |
|
|
|
| 6.5 (MANUFACTURE-Position of Holes) |
- |
|
|
|
| 7.3 (FINISH) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 354 |
IS 13997 (2014) |
Drums, large open top - Specification (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5, Table 1 (Dimensions-D2) |
- |
|
|
|
| 5, Table 1 (Dimensions-D3) |
- |
|
|
|
| 5, Table 1 (Dimensions-D4) |
- |
|
|
|
| 5, Table 1 (Dimensions-H1) |
- |
|
|
|
| 5, Table 1 (Dimensions-H5) |
- |
|
|
|
| 5, Table 1 (Dimensions-h2) |
- |
|
|
|
| 5, Table 1 (Dimensions-h3) |
- |
|
|
|
| 5, Table 1 (Dimensions-h4) |
- |
|
|
|
| 5, Table 1 (Dimensions-p1) |
- |
|
|
|
| 6.2 (The nominal thickness of steel sheets for body
and ends ) |
- |
|
|
|
| 7.1 ( CONSTRUCTION) |
- |
|
|
|
| 7.1 ( CONSTRUCTION) |
- |
|
|
|
| 7.2 ( CONSTRUCTION) |
- |
|
|
|
| 7.3 ( CONSTRUCTION- Double Seam/Spiral Seam/Triple Seam Construction for Grade A Drums) |
- |
|
|
|
| 7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums) |
- |
|
|
|
| 7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums-Seam rolling layers) |
- |
|
|
|
| 7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums-Seam rolling layers) |
- |
|
|
|
| 7.5 ( CONSTRUCTION) |
- |
|
|
|
| 7.6 ( CONSTRUCTION) |
- |
|
|
|
| 7.7 ( CONSTRUCTION) |
- |
|
|
|
| 7.8 ( CONSTRUCTION) |
- |
|
|
|
| 7.8 ( CONSTRUCTION- crest to trough gap) |
- |
|
|
|
| 7.8 ( CONSTRUCTION- no of corrugations on the body Each side) |
- |
|
|
|
| 7.9 (Closures) |
- |
|
|
|
| 7.10(a) (Closures) |
- |
|
|
|
| 7.10(b) (Closures) |
- |
|
|
|
| 7.10(c) (Closures) |
- |
|
|
|
| 7.10(d) (Closures) |
- |
|
|
|
| 7.11 ( Locking Ring) |
- |
|
|
|
| 8.1 (FINISH
) |
- |
|
|
|
| 8.2 (FINISH
) |
- |
|
|
|
| 9 (leakage test) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 355 |
IS 12664 : Part 1 (2003) |
Artificial limbs - Sach foot for lower extremity prostheses: Part 1 design and dimensions (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Type) |
- |
|
|
|
| 5,5.1 (Material for Foot) |
- |
|
|
|
| 5,5.2 (Material for Heel) |
- |
|
|
|
| 6, 7.3,Table1 ( Length of Foot) |
- |
|
|
|
| 6, 7.3,Table1 (Toe Circumference) |
- |
|
|
|
| 6, 7.3,Table1 (Heel Width ( Thread line)) |
- |
|
|
|
| 6, 7.3,Table1 (Heel Height) |
- |
|
|
|
| 6, 7.3,Table1 (Foot Height) |
- |
|
|
|
| 6, 7.3,Table1 (Heel Height) |
- |
|
|
|
| 7,7.1 (SHAPE & DESIGN; Performance Test) |
- |
|
|
|
| 7,7.2 (SHAPE & DESIGN Proper Shape) |
- |
|
|
|
| 7,7.4 (Adoption of Foot) |
- |
|
|
|
| 8,8.1 (Marking) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 356 |
IS 4159 (2002) |
Mineral filled sheathed heating elements - Specification (Third Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.6 of IS 4159:2002 &
IS 302-1:2008
(Classification) |
- |
|
|
|
| Cl.6 of IS 4159:2002 &
IS 302-1:2008
(Classification) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking
) |
- |
|
|
|
| Cl.8 of IS 4159:2002 & IS 302‐1:2008 (Protection Against Electric Shock) |
- |
|
|
|
| Cl.10 of IS 4159:2002 &
IS 302-1:2008 (Input & Current) |
- |
|
|
|
| Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise) |
- |
|
|
|
| Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise) |
- |
|
|
|
| Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise) |
- |
|
|
|
| Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise) |
- |
|
|
|
| Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise) |
- |
|
|
|
| Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise) |
- |
|
|
|
| Cl.13 of IS 4159:2002 & IS 302-1: 2008 (Electrical Insulation and Leakage Current at Operating Temperature) |
- |
|
|
|
| Cl.13 of IS 4159:2002 & IS 302-1: 2008 (Electrical Insulation and Leakage Current at Operating Temperature) |
- |
|
|
|
| Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance) |
- |
|
|
|
| Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance) |
- |
|
|
|
| Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance) |
- |
|
|
|
| Cl.16 of IS 4159:2002 & IS 302-1: 2008 (Insulation Resistance & Electric Strength (after Humidity Treatment)) |
- |
|
|
|
| Cl.16 of IS 4159:2002 & IS 302-1: 2008 (Insulation Resistance & Electric Strength (after Humidity Treatment)) |
- |
|
|
|
| Cl.18 of IS 4159:2002 (Endurance Test
) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation) |
- |
|
|
|
| Cl.20 of IS 4159:2002 & IS 302-1: 2008 (Stability & Mechanical Hazards
) |
- |
|
|
|
| Cl.21 of IS 4159:2002 & IS 302-1: 2008 (Mechanical Strength) |
- |
|
|
|
| Cl.21 of IS 4159:2002 & IS 302-1: 2008 (Mechanical Strength) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 4159:2002 &
IS 302-1: 2008 (Construction) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.23 of IS 4159:2002 &
IS 302-1: 2008 (Internal Wiring
) |
- |
|
|
|
| Cl.24 of IS 4159:2002 &
IS 302-1: 2008 (Component ) |
- |
|
|
|
| Cl.24 of IS 4159:2002 &
IS 302-1: 2008 (Component ) |
- |
|
|
|
| Cl.25 of IS 4159:2002 & IS 302-1: 2008 (Supply connection & external flexible cables & cords) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing) |
- |
|
|
|
| Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing) |
- |
|
|
|
| Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection ) |
- |
|
|
|
| Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection ) |
- |
|
|
|
| Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection ) |
- |
|
|
|
| Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection ) |
- |
|
|
|
| Cl. 29 of IS 4159:2002 &
IS 302-1: 2008 (Creepage Distances & Clearances) |
- |
|
|
|
| Cl. 30 of IS 4159:2002 &
IS 302-1: 2008 (Resistance to Heat, Fire and Tracking) |
- |
|
|
|
| Cl. 30 of IS 4159:2002 &
IS 302-1: 2008 (Resistance to Heat, Fire and Tracking) |
- |
|
|
|
| Cl. 31 of IS 4159:2002 &
IS 302-1: 2008 (Resistance to Rusting) |
- |
|
|
|
| Cl. 33.1 of IS 4159:2002 (Finish Test
) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 357 |
IS 12585 (1988) |
Specification for thermoplastic hoses (Textile Reinforced) for water - General purpose |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3 (Types) |
- |
|
|
|
| Cl 4.1 (Construction) |
- |
|
|
|
| Cl 4.2 (Dimensions & Tolerances) |
- |
|
|
|
| Cl 4.3.3 (Pressure Requirements) |
- |
|
|
|
| Cl 4.3.4 (Minimum Bend Radius) |
- |
|
|
|
| Cl 4.3.5 (Low Temperature Flexibility) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
| 358 |
IS 8783 : Part 4 : Sec 3 (1995) |
Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (Packing (As per Cl.5.1 of IS 8783 (Part 4/Sec 3) : 1995)) |
- |
|
|
|
| 6.1 (Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995)) |
- |
|
|
|
| 6.2 (Marking (As per Cl.6.2 of IS 8783 (Part 4/Sec 3) : 1995)) |
- |
|
|
|
| 4 (Conductor As per IS:8783(Pt 1):1995]) |
- |
|
|
|
| 5 ([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995]) |
- |
|
|
|
| 5 ([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995]) |
- |
|
|
|
| 5 ([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995]) |
- |
|
|
|
| 4.1, table 1 & 2 (Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995) |
- |
|
|
|
| 4.1, table 1 & 3 (Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995) |
- |
|
|
|
| 4.1, table 1 & 4 (Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995) |
- |
|
|
|
| 4.2 (Insulation (As per Cl.4.2 of IS 8783(Part4/Sec 3): 1995) |
- |
|
|
|
| 4.3 (Insulation (As per Cl.4.3 of IS 8783(Part4/Sec 3): 1995) |
- |
|
|
|
| 4.4 (Insulation (As per Cl.4.4 of IS 8783(Part4/Sec 3): 1995) |
- |
|
|
|
| 4 ((Cl.4.5 of IS 8783 (Part 4/Sec 3) : 1995)) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
| 4 (Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995]) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 359 |
IS 368 (2014) |
Electric immersion water heaters - Specification (Fifth Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.6 of IS 302-‐2-‐201:2008 (Classification) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.7 of IS 302-2-201:2008 (Marking and Instruction ) |
- |
|
|
|
| Cl.8 of IS 302‐2-201: 2008 (Protection Against Access to Live Parts) |
- |
|
|
|
| Cl.10 of IS 302‐2‐201:2008 (Power Input and Current ) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl.11 of IS 302-2201: 2008 (Heating) |
- |
|
|
|
| Cl. 12 of IS 368:2014 (Operation under overload conditions of appliances with heating elements) |
- |
|
|
|
| Cl.13 of IS 302-2-201: 2008 (Leakage Current & Electric Strength at Operating Temperature) |
- |
|
|
|
| Cl.13 of IS 302-2-201: 2009 (Leakage Current & Electric Strength at Operating Temperature) |
- |
|
|
|
| Cl.15 of IS 302-2-201:2008 (Moisture Resistance ) |
- |
|
|
|
| Cl.15 of IS 302-2-201:2008 (Moisture Resistance ) |
- |
|
|
|
| Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength) |
- |
|
|
|
| Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength) |
- |
|
|
|
| Cl.17 of IS 302‐2-201: 2008 (Overload Protection of Transformers & Associated Circuits) |
- |
|
|
|
| Cl.18 of IS 368:2014 (Endurance) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation ) |
- |
|
|
|
| Cl.20 of IS 302-2-201: 2008 (Stability & Mechanical Hazards) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.21 of IS 302-2-201: 2008 (Mechanical Strength ) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.22 of IS 302-2-201: 2008 (Construction) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.23 of 302-2-201:2008 (Internal Wiring ) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.24 of IS 302-2-201: 2008 (Component) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords) |
- |
|
|
|
| Cl.26 of IS 302-2-201: 2008 (Terminals for External Conductors) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.27 of IS 302-2-201: 2008 (Provision for Earthing ) |
- |
|
|
|
| Cl.28 of IS 302-2-201: 2008 (Screws & Connections ) |
- |
|
|
|
| Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation ) |
- |
|
|
|
| Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation ) |
- |
|
|
|
| Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire ) |
- |
|
|
|
| Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire ) |
- |
|
|
|
| Cl.31 of IS 302-2-201:2008 (Resistance of Rusting ) |
- |
|
|
|
| Cl.32 of IS 302-2-201:2008 (Radiation, Toxicity and Similar Hazards) |
- |
|
|
|
|
Complete
|
|
- |
-
- |
| 360 |
IS 10891 : Part 1 (2001) |
Steel wire ropes for aerial ropeways - Specification: Part 1 haulage ropes (First Revision) |
- |
-
|
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4. Table 1to 6 ( ROPE SIZE AND TOLERANCE) |
- |
|
|
|
| 4 and 5 Table 1 t0 6 (MINIMUM BREAKING FORCE OF WIRE ROPE,KN) |
- |
|
|
|
| 4 and 5 Table 1 t0 6 (APPROXIMATE MASS,KG/100M) |
- |
|
|
|
| 6 (GENERAL REQUIREMENTS IS6594) |
- |
|
|
|
| 6.1.1 ( i)Fibre Core IS 1804.) |
- |
|
|
|
| 6.1.1 ( ii)Steel Core) |
- |
|
|
|
| 6.2 ( Joints IS 6594.) |
- |
|
|
|
| 6.3 (Lay) |
- |
|
|
|
| 7 ( GALVANIZING) |
- |
|
|
|
|
Partial
|
|
- |
-
- |
