BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

301

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Workmanship)	-
Cl. 6.5 (Strenght of joints/seams)	-
Cl. 6.7 (Ease of in-situ Repair)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i (Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i (Mass per unit area, Grade-LN Light, Ref. IS 7016(Part 1))	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i (Mass per unit area, Grade-MN Medium, Ref. IS 7016(Part 1))	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i (Mass per unit area, Grade-HN Heavy, Ref. IS 7016(Part 1))	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i (Mass per unit area, Grade-XHN Extra heavy, Ref. IS 7016(Part 1))	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b) (Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b) (Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-

Partial

-
-

302

IS 7652 (1988)

Specification for sphygmomanometer, aneroid type (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.2 (Rubber Parts (Ageing Test)- Cl.3.2)	-
Cl.3.2 (Rubber Parts (Tensile Strength before ageing)- IS 3400 (Part1): 1977)	-
Cl.3.2 (Rubber Parts (Elongation at break before ageing)- IS 3400 (Part1): 1977)	-
Cl.3.3 (Glass or plastic cover)	-
Cl. 4.1 & 4.1.1 (Component Parts as per Cl 4.1 & 4.1.1)	-
Cl. 4.2 (Cuff)	-
Cl. 4.2, Fig 2 (Cuff Dimension A)	-
Cl. 4.2, Fig 2 (Cuff Dimension B)	-
Cl. 4.3 (Tubing- Cl 4.3)	-
Cl. 4.3 (Tubing (Internal Diameter))	-
Cl. 4.3 (Tubing (External Diameter))	-
Cl.4.4 (Inflating Bag (Thigh) Length)	-
Cl.4.4 (Inflating Bag (Thigh) Breadth)	-
Cl.4.4 (Inflating Bag (Arm) Length)	-
Cl.4.4 (Width of Seams in rubber bag)	-
Cl.4.5 (Inflating Bulb)	-
Cl.4.6 (Control Valve)	-
Cl.4.7 (Fastner)	-
Cl.4.8 (Scale Range)	-
Cl.4.9 (Pressure Measuring Device )	-
Cl. 5 (Workmanship & Finish)	-
Cl. 6.1 (Accuracy of calibration)	-
Cl. 6.2 (Leakage Test (Inflating Bag ))	-
Cl. 6.4 (Air presssure test)	-
Cl. 6.5 (Corrosion Resistance Test)	-

Complete

-
-

303

IS 4509 (1992)

Ring slugging wrenches (Spanners) - specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Dimensions- a)	-
3 (Dimensions- s)	-
3 (Dimensions- b)	-
3 (Dimensions- l)	-
5 (Hardness)	-

Complete

-
-

304

IS 624 (2003)

Bicycles - Rims - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (SHAPES AND DIMENSIONS)	-
3.2.1 (MEASUREMENT OF CIRCUMFERENCE)	-
4.1 (MATERIAL)	-
5 (DESIGNATION)	-
6.1 (MANUFACTURE)	-
6.1 (MANUFACTURE)	-
6.1 (MANUFACTURE)	-
6.2 (MANUFACTURE)	-

Partial

-
-

305

IS 14544 (1998)

Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Types)	-
5, 5.1 (Requirements )	-
5.2, 5.2.1, 5.2.1.1 (Materials - Upper Leather )	-
5.2.2 (Materials - Insole Material )	-
5.2.3 (Materials - Stiffener )	-
5.2.4 (Materials - Lining Material )	-
5.2.5 (Materials - Threads )	-
5.2.6, 5.2.6.1 (Materials - Grinderies - Lasting tacks )	-
5.2.6, 5.2.6.2 (Materials - Grinderies - Shanks)	-
5.2.6, 5.2.6.3 (Materials - Grinderies - Eyelets)	-
5.2.7 (Materials - Cotton NEWAR)	-
5.2.8 (Materials - Toe-Compound)	-
5.2.9 (Materials - Laces)	-
5.2.10 (Materials - Steel Toe Cap)	-
5.2.11.1 (Table 1) (Sole and Heel )	-
5.2.11.2 (Sole and Heel )	-
5.2.11.3 (Table 2) (Sole and Heel )	-
5.2.11.4 (Sole and Heel )	-
5.3 (Table 3) (Components)	-
5.4.8 (Workmanship and Finish)	-
5.4.8.2 (Workmanship and Finish)	-
5.5, 5.5.1 (Mass)	-
5.5, 5.5.2 (Mass)	-
5.5, 5.5.3 (Mass)	-

Partial

-
-

306

IS 6218 (2008)

Bicycle - Mudguards - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause-3 (Carbon)	-
Clause-3 (Sulphur)	-
Clause-3 (Phosphorus)	-
Clause-3 (Manganse)	-
Clause-3 (Silicon)	-
Clause-3 (Aluminium)	-
Clause-3 (Nitrogen)	-
Clause-3 (Chromium)	-
Clause-3 (Nickel)	-
Clause-3 (Niobium)	-
Clause-3 (Vanadium)	-
Clause-3 (Molybdenum)	-
Clause-3 (Boron)	-
Clause-3 (Calcium)	-

Complete

-
-

307

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1 (viii) (b), Table 1 (Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-
1 (ii) (a) Table 1 (Water absorption, 2h soacking (Flat Pressed Single Layer))	-
1 (ii) Table 1 (b) (Water absorption, 24h soacking (Flat Pressed Single Layer))	-
1 (i) Table 1 (Density Variation (Flat Pressed Single Layer))	-
1 (i) Table 1 (Density Variation (Flat Pressed Three Layer grade 1))	-
1 (v) Table 1 (Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-
1 (vi) (a), Table 1 (Modulus of rupture, Average (Flat Pressed Single Layer))	-
1 (vi) (b), Table 1 (Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-
1 (vii) (b), Table 1 (Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-
1 (vii) (a), Table 1 (Modulus of elasticity, Average (Flat Pressed Single Layer))	-
1 (viii) (a), Table 1 (Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-
8.3 (Dimensional Tolerances)	-
9.2, 11.4 (Moisture content)	-
1 (vii) (b), Table 1 (Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-
1 (viii) (a), Table 1 (Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-
1 (viii) (a), Table 1 (Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-
1 (viii) (a), Table 1 (Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-
1 (viii) (b), Table 1 (Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-

Partial

-
-

308

IS 2556 : Part 4 (2004)

Vitreous sanitary appliances (Vitreous China) - specification: Part 4 specific requirements of wash basins

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-
4 (SIZE)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Functional Dimensions-A)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Functional Dimensions-B)	-

Partial

-
-

309

IS 14166 (1994)

Respiratory protective devices full - Face masks - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.4 (Replaceable Components)	-
4.14.1, 4.14.1.1 (Inhalation Valve (s))	-
4.14.2, 4.14.2.1 (Exhalation Valve (s))	-

Partial

-
-

310

IS 8794 (1988)

Specification for cast iron detachable joints for use with asbestos cement pressure pipes (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 2 (External Dia of AC Pipe(D2))	-
6.1, Table 2 (Inside diaFlange(DI))	-
6.1, Table 2 (External Dia at Centre(DEC))	-
6.1, Table 2 (Collar Width(Wc))	-
6.1, Table 2 (Thickness(t))	-
6.1, Table 2 (Radius of Curvature(R))	-
6.1, Table 3 (Nominal Dia of Bolt(do))	-
6.1, Table 3 (Minimum prefared length of bolt(L))	-
6.1, Table 4 (Mass of joints)	-
8.4 (Coating)	-

Partial

-
-

311

IS 1328 (1996)

Veneered Decorative Plywood -Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11 (Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-
11 (Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-
11 (Tests - Moisture Content - Part 1 of IS 1734)	-
9 (Finish - Cl. 9.2, 8.3)	-
9 (Finish - Cl. 9.1, 8.3)	-
8 (Dimensions & Tolerances - Squareness - Annexure C)	-
8 (Dimensions & Tolerances - Edge Straightness - Annexure C)	-
8 (Dimensions & Tolerances - Thickness - Cl. 8)	-
8 (Dimensions & Tolerances - Width - Cl. 8)	-
8 (Dimensions & Tolerances - Length - Cl. 8)	-
7.2.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-
7.1.3 (Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-
7.1.2 (Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-
7.1.1 (Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-

Complete

-
-

312

IS 2556 : Part 3 (2004)

Vitreous Sanitary Appliances (Vitreous China) - - Part 3: Specific Requirements of Squatting Pans

- View breakup
Rs 525/- +charges as part I

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (PATTERNS )	-
4 (SIZE)	-
5.1 (CONSTRUCTION)	-
5.1.1 (CONSTRUCTION)	-
5.1.1 (CONSTRUCTION)	-
5.1.1 (CONSTRUCTION)	-
5.1.1 (CONSTRUCTION)	-
5.1.1 (CONSTRUCTION)	-
5.1.1 (CONSTRUCTION)	-
5.2 (CONSTRUCTION)	-
5.2 (CONSTRUCTION)	-
5.3 (CONSTRUCTION)	-
5.3 (CONSTRUCTION)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-A)	-

Partial

-
-

313

IS 9103 (1999)

Specification for Concrete Admixtures -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4, Table 1A (Slump)	-
Cl 4, Table 1 B (Flow, Loss of workability on satnding, Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-
Cl 4, Table 1A (Water Content, percent of control sample, Max)	-
Cl 4, Table 1 B (Flow)	-
Cl 4, Table 1A (Time of setting, allowable deviation from control sample hours)	-
Cl 4, Table 1A (Compressive strength, percent of control sample, Min)	-
Cl 4, Table 1A (Flexural strength, percent of control sample, Min)	-
Cl 4, Table 1A (Length change, percent increase over control sample, Max)	-
Cl 4, Table 1A (Bleeding, percent increase over control sample, Max)	-
Cl 4, Table 1A (Loss of workability)	-
Cl 4, Table 1A (Air content (%), Max, over control)	-
Cl 4, Table 1 B (Loss of workability on standing)	-
Cl 4, Table 1 B (Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-
Clause 9, Table- 2 (Dry material content )	-
Clause 9, Table- 2 (Ash content)	-
Clause 9, Table- 2 (Relative density)	-

Partial

-
-

314

IS 2641 (1989)

Electric welding accessories - Specification (First Revision)

- View breakup
Rs.3000/- for complete testing of product of electrode holders, Rs.1500/- for complete testing of product of return current clamps

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Rated Current, IS 2641)	-
5.2.1 (Design and Construction, IS 2641)	-
5.2.2.1 (General requirements, IS 2641)	-
5.2.2.2 (General requirements, IS 2641)	-
5.2.2.3 (General requirements, IS 2641)	-
5.2.2.4 (General requirements, IS 2641)	-
5.2.2.5 (General requirements, IS 2641)	-
5.2.2.6 (General requirements, IS 2641)	-
5.2.2.7 (General requirements, IS 2641)	-
5.2.2.8 (General requirements, IS 2641)	-
5.2.2.9 (General requirements, IS 2641)	-
5.2.2.10 (General requirements, IS 2641)	-
5.2.2.11 (General requirements, IS 2641)	-
5.2.2.12 (General requirements, IS 2641)	-
5.2.2.13 (General requirements, IS 2641)	-
5.3.3 (Temperature Rise Test, IS 2641)	-
5.3.4 (Insulation resistance test, IS 2641)	-
5.3.5 (High Voltage Test, IS 2641)	-
5.3.6.1 (Test for Impact Strength-Impact test by vertical fall, IS 2641)	-
5.3.6.2 (Test for Impact Strength-Lateral impact strength, IS 2641)	-
5.3.7 (Test for Flammability and Resistance to Heat, IS 2641)	-
5.4 (Marking, IS 2641)	-
5.4 (Marking, IS 2641)	-
5.4 (Marking, IS 2641)	-

Complete

-
-

315

IS 11552 (2020)

Liquid Nitrogen Vessels of Capacity up to 75 Litres — Specification ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Construction)	-
5.1 (Water Capacity)	-
7 (Painting)	-
5.1 (Water Capacity)	-

Partial

-
-

316

IS 2556 : Part 7 (1995)

Vitreous sanitary appliances (Vitreous China) - specification: Part 7 specific requirements of accessories for sanitary appliances

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS-STOP END CHANNEL WITH OUTLET-Type A )	-
4 (DIMENSIONS-PLAIN CHENNEL-Type B )	-
4 (DIMENSIONS-PLAIN CHENNEL-Type A )	-
4 (DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type B )	-
4 (DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type A )	-
4 (DIMENSIONS-PLAIN CHANNEL WITH SOCKET-Type B )	-
4 (DIMENSIONS-FOOT REST )	-
4 (DIMENSIONS-Traps for Long Pattern and Orilsa Pattern Pans )	-
4 (DIMENSIONS-- Ovality permissible within the variation allowed for the dimensioN )	-
4 (DIMENSIONS-- FLOOR TRAP)	-
4 (DIMENSIONS-TYPICAL ILLUSTRATION OF VITRIOUS SHOWER ROSH)	-
5 (CONSTRUCTION)	-
6 (FINISH)	-
7.1 (Performance Test)	-
7.2 (FLUSHING TESTS-Toilet Paper Test-IS 2556(P-3))	-

Partial

-
-

317

IS 12406 (2003)

Medium density fibre boards for general purpose - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 ( Types)	-
Cl 7 (Finish)	-
Cl 8 (Dimensions & Tolerances)	-
Cl 11.4 (Test For Density)	-
Cl 11.6 (Test For water Absorption)	-
Cl 11.7.1 (Due To General Absorption)	-
Cl 11.7.2 (Due To Surfacel Absorption)	-
Cl 11.8 (Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-
Cl 11.9 (Test For Internal Bond)	-
Cl 11.10 (Test For Screw Withdrawal Strength)	-

Partial

-
-

318

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 302-2-30:2007 (Classification)	-
Cl.6 of IS 302-2-30:2007 (Classification)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008 (Power Input and Current)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength at operating temp)	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength at operating temp)	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008 (Moisture Resistance)	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008 (Moisture Resistance)	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008 (Stability & Mechanical Hazards)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.26 of IS 302-2-30:2007 &IS:302-1:2008 (Terminal for External Conductors)	-
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008 (Provision for Earthing)	-
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008 (Provision for Earthing)	-
Cl.28 of IS 302-2-30:2007 &IS:302-1:2008 (Screws and Connections)	-
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation.)	-
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation.)	-
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008 (Resistance to Heat and Fire.)	-
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008 (Resistance to Heat and Fire.)	-
Cl.31 of IS 302-2-30:2007 &IS:302-1:2008 (Resistance to Rusting)	-
Cl.7 of IS 369:2019 (Dimensions)	-
Cl.7 of IS 369:2019 (Dimensions)	-
Cl.7 of IS 369:2019 (Dimensions)	-
Cl.9 of IS 369:2019 (Temperature rises of surfaces surrounding the heater)	-
Cl.9 of IS 369:2019 (Temperature rises of surfaces surrounding the heater)	-
Cl.9 of IS 369:2019 (Temperature rises of surfaces surrounding the heater)	-
Cl.9 of IS 369:2019 (Temperature rises of surfaces surrounding the heater)	-
Cl.9 of IS 369:2019 (Temperature rises of surfaces surrounding the heater)	-
Cl.10 of IS 369:2019 (Warming-up time of the heater)	-
Cl.14 of IS 369:2019 (Inrush current)	-

Partial

-
-

319

IS 8462 (1977)

Specification for sterilizer, portable, vertical, pressure type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Heating Elements for Electrically Operated Sterilizer)	-

Partial

-
-

320

IS 5022 (1989)

Sterilizer, instruments, table model (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2.1 (Electric Operation (IS 5022))	-
8.2.1 (Electric Operation (IS 5022))	-
8.2.1 (Electric Operation (IS 5022))	-
8.2.2 (Electric Operation (IS 5022))	-
8.2.3 (Heating Element (IS 4159))	-
8.2.4 (Thermostat (IS 5022))	-
4.1 (Design)	-
5.1, Table 1 (Length (IS 5022))	-
5.1, Table 1 (Width (IS 5022))	-
5.1, Table 1 (Working Depth (IS 5022))	-
5.2 (Thickness of Body (IS 5022))	-
5.2 ( Thickness of Lid (IS 5022))	-
5.2 ( Thickness of Tray (IS 5022))	-
5.2 ( Dia of Handle (IS 5022))	-
5.2 (Thickness of Handle link - connecting the handle liver (IS 5022))	-
5.2 (Thickness of Handle link - connecting the handle lid (IS 5022))	-
6.1 (Construction (IS 5022))	-

Complete

-
-

321

IS 2556 : Part 15 (2004)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 15 specific requirements of universal water closets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-wavy finish-IS 2556 (Part 1)))	-
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-
4 (SIZES)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-W)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-H)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-W1)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L2)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L1)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L3)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-T)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-D)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-h1)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-h2)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-h3)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d3)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-A)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-B)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d4)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d5/2)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-n)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-M)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-θ1)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-θ2)	-
6.1 (CONSTRUCTION-closet)	-
6.1 (CONSTRUCTION-closet)	-
6.1 (CONSTRUCTION)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-d1)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-d2)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-d6)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-f)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-h)	-
7 (FINISH)	-
7 (FINISH)	-
9 (Load Bearing Test)	-

Partial

-
-

322

IS 2556 : Part 2 (2004)

Vitreous sanitary appliances (Vitreous China) - specification: Part 2 specific requirements of washdown water closets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
4 (PATTERNS)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - A)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - H)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - J)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - K)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - L)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - O)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - P)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - Q)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - S)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - T)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - W1)	-
5 and Table 1 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - W2)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - B)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - C1)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - C2)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - D)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - D1)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - D2)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - E)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - F)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - G)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - G1)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - G2)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - G3)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - M)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - N)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - R)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - R1)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - Ɵ)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - X)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - Y)	-
5 and Table 2 Fig. 1, 2 , 3 & 4 (DIMENSIONS AND TOLERANCES - Y1)	-
6.1 (CONSTRUCTION)	-
6.1 (CONSTRUCTION)	-
6.1 (CONSTRUCTION)	-
6.2 (CONSTRUCTION)	-
6.3 (CONSTRUCTION)	-
6.4 (CONSTRUCTION)	-
7 (FINISH)	-

Partial

-
-

323

IS 7098 : Part 2 (2011)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (CONDUCTOR)	-
4.1.1 (CONDUCTOR)	-
5 (INSULATION)	-
6 (SCREENING)	-
6.1.1 (SCREENING : - Non-metallic — Semiconducting Compound)	-
6.1.2 (SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables)	-
7 (FILLERS AND INNER SHEATH)	-
8.1 (ARMOURING)	-
8.2 (ARMOURING)	-
9 (OUTER SHEATH )	-
10.1 (CONDUCTOR)	-
10.2 (CONDUCTOR)	-
11 (CONDUCTOR SCREENING)	-
12.1 (INSULATION)	-
12.2 (INSULATION : Thickness of Insulation)	-
12.3 (INSULATION : Tolerance on Thickness of Insulation)	-
12.4 (Eccentricity and Ovality)	-
12.5 (INSULATION : Application of Insulation)	-
13.1 (INSULATION SCREENING)	-
13.2 (INSULATION SCREENING)	-
13.3 (INSULATION SCREENING)	-
13.4 (INSULATION SCREENING)	-
14.1 (CORE IDENTIFICATION)	-
15.1 (LAVING UP OF CORES)	-
16.1 (INNER SHEATH (COMMON COVERING))	-
16.2 (INNER SHEATH (COMMON COVERING))	-
16.2.1 (INNER SHEATH (COMMON COVERING))	-
16.3 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
17.1 (ARMOURING : Application )	-
17.1.1 (ARMOURING )	-
17.1.2 (ARMOURING )	-
17.1.3 (ARMOURING )	-
17.2 (ARMOURING : Type of armour )	-
17.2.1 (ARMOURING : Type of armour )	-
17.2 (ARMOURING : Coverage )	-
17.3 (ARMOURING : Dimension )	-
17.4 (ARMOURING : Joints)	-
16.4 (ARMOURING : Resistance)	-
18.1 (OUTER SHEATH)	-
18.2 (OUTER SHEATH: Colour)	-
18.3 (Thicknes of outer sheath : average )	-
18.3 (Thicknes of outer sheath : minimum )	-
19.1 i) a) (Annealing test (for copper))	-
19.1 i) b) (Tensile test (for aluminium) - Before stranding )	-
19.1 i) b) (Tensile test (for aluminium) - After stranding )	-
19.1 i) c) (Wrapping test ( for aluminium))	-
19.1 i) d) (Resistance test - Main conductor )	-
19.1 i) d) (Resistance test - Neutral conductor )	-
19.1 iii) a) (Phyaical tests for insulation : Tensile Test)	-
19.1 iii) a) (Phyaical tests for insulation : Elongation )	-
19.1 iii) b) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
19.1 iii) b) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
19.1 iii) d) (Phyaical tests for insulation : Hot set )	-
19.1 iii) d) (Phyaical tests for insulation : Permanent set )	-
19.1 iii) e) (Phyaical tests for insulation : Shrinkage )	-
19.1 vi) a) (Physical tests for outer sheath : Tensile stregth )	-
19.1 vi) a) (Physical tests for outer sheath : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
19.1 vi) b) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
19.1 vi) b) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage )	-
19.1 vi) c) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
19.1 vi) d) (Sheath : Hot deformation)	-
19.1 vi) e) (Loss of massIn air oven)	-
19.1 vi) f) (Sheath : Heat shock test)	-
19.1 vi) g) (Sheath : Thermalstability)	-
19.1 xi) (Insulation resistance test : volume resistivity )	-
20.8 (Flammability test)	-
20.7 (High voltage test)	-
21.1 (IDENTIFICATION : Manufacturer's Identification)	-
21.2 (IDENTIFICATION : Cable Identification)	-
21.3 (IDENTIFICATION : Cable Code)	-

Partial

-
-

324

IS 3831 (1979)

Specification for sterilizer, shallow (Dressing Drum)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Thickness of Body)	-
2 (Thickness of Lid)	-
2 (Thickness of Belt)	-
2 (Thickness of Hasp)	-
2 (Dia of Hinge Wire)	-
2 (Dia of Chain)	-
2 (Thickness of Clamp)	-
2 ( Dia of Handle)	-
3 & Fig 1 (Shape and Dimensions, A)	-
3 & Fig 1 (Shape and Dimensions, B)	-
3 & Fig 1 (Shape and Dimensions, C)	-
3 & Fig 1 (Shape and Dimensions, D)	-
3 & Fig 1 (Shape and Dimensions, E)	-
3 & Fig 1 (Shape and Dimension, Overall Dia)	-
3 & Fig 1 (Shape and Dimension, Overall Height)	-
3 & Fig 1 (Shape and Dimensions, N)	-
4.9.1 (Workmanship & Finish)	-
4.11 (Workmanship & Finish)	-
4.10 (Workmanship & Finish)	-
4.9 (Workmanship & Finish)	-
4.8 (Workmanship & Finish)	-
4.7 (Workmanship & Finish)	-
4.6 (Workmanship & Finish)	-
4.5 (Workmanship & Finish)	-
4.4 (Workmanship & Finish)	-
4.3 (Workmanship & Finish)	-
4.2 (Workmanship & Finish)	-
4.1 (Workmanship & Finish)	-
4 (Workmanship & Finish)	-
5 (Finish)	-
5 (Test)	-

Complete

-
-

325

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-
4.1 (Dimensions Closure (Figure 2))	-
4.1 (Dimensions Closure (Figure 2))	-
4.1 (Dimensions Closure (Figure 2))	-
6.1 (Construction)	-
6.2 (Construction)	-
6.3 (Construction)	-
6.4 (Construction)	-
6.5 (Closure)	-
7.1 (Finish)	-
7.2 (Finish)	-
8 (Air Pressure Test)	-

Complete

-
-

326

IS 1825 (1983)

Specification for aluminium alloy milk cans (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 Fig. 1 (Dimensions & Shape)	-
8 (a) Rated Capacity)	-
8 (c) Batch OR Code No.)	-
4 Fig. 1 (A)	-
4 Fig. 1 (B)	-
4 Fig. 1 (C )	-
4 Fig. 1 (D)	-
4 Fig. 1 (E)	-
4 Fig. 1 (F)	-
4 Fig. 1 (G)	-
4 Fig. 1 (H)	-
4 Fig. 1 (HANDLE )	-
5 (a)Transport cans shall consist of a body, bottom band)	-
5 (c) Mode of Shaping)	-
5 (i) If the thickness at shoulder is less than 2.5 mm a )	-
5 (ii) Brinell Hardness 85 HB Min.)	-
5 (d) BOTTOM BAND- It shall be shrunk fit with a )	-
5 (proper locking arrangement on the body. This shall)	-
5 (be followed by brazing or welding all round.)	-
5 (e) HANDLES (as per Cl 5.6))	-
5 (g)Workmanship and Finish- All brazing or welding shall )	-
5 (h) Mass 6.5 Kg. Min.)	-
7 (i) Air Pressure Test (Cl 7.1))	-
7 (ii) Drop Test (Cl 7.2))	-
7 (iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-

Partial

-
-

327

IS 12586 (1988)

Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.4 (Water capacity)	-
6.5 (Valves)	-
6.6 ( Fittings Other than Valves )	-
6.7 (Foot Ring)	-
8,8.1.8.1.2 (Proof Test)	-
9 (Leakage Test)	-
9 (Leakage Test)	-
10 (Bursting Test)	-
11,1.1.1 (Tensile Test, IS 1608(P1))	-
11,1.1.2 (Bend test)	-
11.2.1 ( Tensile Test of Brazed Joint)	-
11.3 ( Minimum Thickness Test)	-
10 (Bursting Test)	-

Partial

-
-

328

IS 458 (2003)

Precast concrete pipes(With And Without Reinforcement) - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 &8.1,Table 1,i (Internal diameter of pipes.)	-
8 &8.1,Table 1,ii (Collar Dimension.)	-
8 &8.1,Table 1,iii (Minimum Length of Collar)	-
8 &8.1,Table 2,i (Internal diameter of pipes.)	-
8 &8.1,Table 2,ii (Barrel Wall Thickness)	-
8 &8.1,Table 2,iii (Reinforcement)	-
8 &8.1,Table 3,i (Internal diameter of pipes.)	-
8 &8.1,Table 3,ii (Barrel Wall Thickness)	-
8 &8.1,Table 3,iii (Reinforcement)	-
8 &8.1,Table 4,i (Internal diameter of pipes.)	-
8 &8.1,Table 4,ii (Minimum Barrel Wall Thickness)	-

Partial

-
-

329

IS 1784 (2020)

Screwed Closures for Drums — Specification ( Fourth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Materials)	-
5.1 (Manufacture-Bungs)	-
5.1 (Manufacture-Bungs)	-
5.1 (Manufacture-Bungs)	-
5.2 (Manufacture-Flange)	-
5.3 (Manufacture-Capseal )	-
5.4 (Manufacture-Tag Ring)	-
6 (Dimensions-Steel flange- d1)	-
6 (Dimensions-Steel flange- d2)	-
6 (Dimensions-Steel flange- d3)	-
6 (Dimensions-Steel flange- d4)	-
6 (Dimensions-Steel flange- h1)	-
6 (Dimensions-Steel flange- s1)	-
6 (Dimensions-Steel flange- t1)	-
6 (Dimensions-Flange Gasket- wd)	-
6 (Dimensions-Flange Gasket-ww)	-
6 (Dimensions-Flange Gasket-wt)	-
6 (Dimensions-Steel Bung- d1)	-
6 (Dimensions-Steel Bung- p1)	-
6 (Dimensions-Steel Bung- p2)	-
6 (Dimensions-Steel Bung- p3)	-
6 (Dimensions- Bung Gasket- wd)	-
6 (Dimensions-Flange Gasket-ww)	-
6 (Dimensions-Flange Gasket-wt)	-
6 (Dimensions-Capseals- d1)	-
6 (Dimensions-Capseals- d2)	-
6 (Dimensions-Capseals- h1)	-
6 (Dimensions-Capseals- h2)	-
6 (Dimensions-Capseals- w1)	-
6 (Dimensions-Tag Ring- d1)	-
6 (Dimensions-Tag Ring- d2)	-
6 (Dimensions-Tag Ring- d3)	-
6 (Dimensions-Tag Ring- d4)	-
6 (Dimensions-Tag Ring- d5)	-
6 (Dimensions-Tag Ring- h1)	-
6 (Dimensions-Zinc Bung- d1)	-
6 (Dimensions-Zinc Bung- d2)	-
6 (Dimensions-Zinc Bung- d3)	-
6 (Dimensions-Zinc Bung- p1)	-
6 (Dimesnsions)	-
7 (Finish)	-
8.1 (Interchangeability)	-
8.2 (Air Pressure Test)	-
8.3.1 (Torque Test for Steel Bungs)	-
8.3.2 (Torque Test for Steel Bungs)	-
4 (Materials)	-

Complete

-
-

330

IS 12640 : Part 2 (2016)

Residual current operated circuit - Breakers with integral overcurrent protection for household and similar uses (Rcbos): Part 2 general rules

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1.3 (Clearances and creepage distances (internal parts))	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List