BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

271

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10.13 & Annex F ( Test For Resistance to Cigarette Burn)	-
Cl 10.12 & Annex E ( Test For Crack Resistance)	-
Cl 10.9 (Test For Screw Withdrawal Strength)	-
Cl 10.8 (For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-
Cl 10.7 (For Determination of Tensile Strength Perpendicular to Surface)	-
Cl 10.6 (Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-
Cl 10.5 (For Swelling in water Test )	-
Cl 10.4 (For Water AbsorptionTest )	-
Cl 10.3 (Test For Moisture Content)	-
Cl 10.2 (Test For Density)	-
Cl 8 (Dimensions & Tolerances)	-
Cl 7 (Finish)	-
Cl 6 (Manufacture)	-

Partial

-
-

272

IS 8808 (2019)

Burners for oil pressure stoves and oil pressure heaters - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (TYPES)	-
6.1 (SHAPE, SIZES AND DIMENSIONS - FIG. 1A,1B AND 2)	-
6.1 (SHAPE, SIZES AND DIMENSIONS - FIG. 3A,3B AND 3C)	-
8 (FINISH)	-
10.1 (TESTS-Pressure Tests)	-
10.2 (TESTS-Tests for Thermal Efficiency)	-
5 (MATERIALS- Roarer type burner)	-
5 (MATERIALS-Silencer type burner)	-
5 (MATERIALS- Tube type burner)	-

Partial

-
-

273

IS 9762 (1994)

Specification for polyethylene floats (Spherical) for float valves

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 8.1 (Leakage & water ab. Test)	-
cl 8.2 (Deflection Test)	-
cl 8.3 (Impact test)	-
cl 8.4 (Boss test)	-

Complete

-
-

274

IS 3989 (2009)

Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Hydrostatic Test)	-
6.2,6.3, Table 1 & 4 (Dimensions & Tolerances, mm)	-
6.2,6.3, Table 1 & 4 (Equal branches without access door,mm)	-
6.2,6.3, Table 1 & 4 (Barrel)	-
6.2,6.3, Table 1 & 4 (Socket)	-
6.2,6.3, Table 1 & 4 (Joint Thickmess)	-
8 (Coating Test)	-

Complete

-
-

275

IS 14494 (2019)

Elastomer insulated flexible cables for use in mines - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (CONDUCTOR)	-
5 (INSULATION)	-
5.1 (Power Cores)	-
5.2 (Pilot and Earth Cores)	-
7.1 (TAPE : Proofed Tape)	-
7.2 (TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-
7.3 (TAPE )	-
8 (CENTRE)	-
9.1 (FILLERS)	-
9.2 (FILLERS)	-
10 (CRADLE SEPARATOR)	-
11.1 (ARMOUR)	-
11.2 a) (ARMOURING: Tensile Strength)	-
11.2 b) (ARMOURING: Elongation )	-
11.2 c) (ARMOURING: Torsion Test (For round wire ) )	-
11.2 d) (ARMOURING: Uniformity of zinc coating)	-
11.2 e) (ARMOURING: Mass of zinc coating )	-
12.1 (SHEATH : Inner Sheath)	-
12.2 (SHEATH : Outer Sheath)	-
13.1 (REINFORCEMENT MATERIAL : Tape)	-
14.1 (CONSTRUCTION : CONDUCTOR)	-
14.2 (CONSTRUCTION : CONDUCTOR)	-
14.3 (CONSTRUCTION : CONDUCTOR)	-
16.1 (INSULATION)	-
16.2 (INSULATION : Thickness of Insulation)	-
16.3 (INSULATION : Tolerance on Insulation Thickness)	-
16.4 (INSULATION : Application of Insulation)	-
16.5 (INSULATION)	-
18 (PROTECTIVE SCREEN)	-
19 (CONDUCTANCE OF SCREEN)	-
19.1 (Individual Core Screen)	-
19.2 (Collective Screen)	-
20.1 (CORE IDENTIFICATION)	-
20.2 (Colour Scheme for Identification)	-
20.3 (Scheme for Identification by Numbering)	-
21.1 (LAYING UP OF CORES)	-
21.2 (LAYING UP OF CORES)	-
21.3 (LAYING UP OF CORES)	-
21.4 (LAYING UP OF CORES)	-
22.1 (INNER SHEATH)	-
22.2 (Thickness of Inner Sheath)	-
22.3 (INNER SHEATH)	-
23.1 (ARMOURING)	-
23.2 (ARMOURING)	-
23.3 (ARMOURING)	-
23.4 (ARMOURING)	-
24.1 (OUTER SHEATH)	-
24.2 (Thickness of Outer Sheath)	-
24.3 (Tolerance on Thickness of Outer Sheath)	-
24.4 (OUTER SHEATH)	-
25.1 (CABLE CONSTRUCTION AND DIMENSIONS)	-
27.8 (Flammability Test)	-

Partial

-
-

276

IS 14845 (2000)

Resilient seated cast iron air relief valves for water works purposes - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl 3)&(Cl5) (Type & Nom Size)	-
(Cl 3)&(Cl5) (Type & Nom Size)	-
(Cl 3)&(Cl5) (Type & Nom Size)	-
(Cl 4) (Nom.Pressures)	-
(Cl 8) (End Connection)	-
(Cl.14) (Coating)	-
(Cl10.6) (Nut & Bolts)	-
(Cl.11) (Finish)	-

Complete

-
-

277

IS 7142 (1995)

Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13 (CHECKING OF WATER CAPACITY)	-
14.1.1 (PROOF TEST)	-
15.1 (PNEUMATIC LEAKAGE TEST)	-
16.2 ( Bursting Test)	-
17.3 i) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 ii) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 iii) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 iv) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.3 v) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.3 vi) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.3 vii) (Acceptance test Weld joint test Specimen)	-
17.4 (Bend test across weld)	-
17.5 (Macro-examination)	-
17.6 (Minimum Thickness Test)	-
10.3 (Bung)	-
10.1 (FITTINGS OTHER THAN VALVES)	-
10.2 ii) (FITTINGS OTHER THAN VALVES)	-
10.2 iii) (FITTINGS OTHER THAN VALVES)	-
19 (COLOUR IDENTIFICATION)	-
9.1 (VALVES AND VALVES PAD)	-

Complete

-
-

278

IS 15905 (2011)

Hubless centrifugally cast (Spun) iron pipes, fittings and accessories - Spigot series - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Hardness )	-
7.1 (Visual Inspection and Hammer Test)	-
8.1 (Crushing Strength )	-
9.1 (Hydraustatic Test)	-
10.1 (External Diameter)	-
10.2, Table 3, Sl no. I to IV (Pipe Thickness)	-
10.2 , Table 3, Sl no. I to IV (Fittings Thickness)	-
10.3 (Length)	-
10.5 (Masses)	-
11.2.1, 11.2.2, Table 4 and 5, Sl no. Ito V (Nominal Size (DN))	-
11.2.1, 11.2.2, Table 4 and 5, Sl no. I to V (a)	-
11.2.3, Table 6, Sl no. I to IV (Nominal Size (DN 1))	-
11.2.3, Table 6, Sl no. I to IV (a)	-
11.2.3, Table 6, Sl no. I to IV (r)	-
11.2.4, Table 7, Sl no. I to V (Nominal Size (DN 1))	-
11.2.4, Table 7, Sl no. I to V (a)	-
11.2.4, Table 7, Sl no. I to V (b)	-
11.2.5, Table 8, Sl no. I to II (Nominal Size (DN 1))	-
11.2.5, Table 8, Sl no. I to II (Nominal Size (DN 2))	-
11.2.5, Table 8, Sl no. I to II (a)	-
11.2.5, Table 8, Sl no. I to II (r)	-
11.2.5, Table 8, Sl no. I to II (b)	-
11.2.5, Table 8, Sl no. I to II (c )	-
11.2.5, Table 8, Sl no. I to II (d)	-
11.2.6, Table 9, Sl no. I to II (Nominal Size (DN ))	-
11.2.6, Table 9, Sl no. I to II (a)	-
11.2.6, Table 9, Sl no. I to II (b)	-
11.2.6, Table 9, Sl no. I to II (c)	-
11.2.6, Table 9, Sl no. I to II (r)	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 1))	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 2))	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (L)	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (a)	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (b)	-
11.2.11, Table 14, (Nominal Size (DN 1))	-
11.2.11, Table 14, (Nominal Size (DN 2))	-
11.2.11, Table 14, ( L)	-
11.2.12, Table 15 (Nominal Size (DN ))	-
11.2.12, Table 15 (L)	-
11.2.12, Table 15 (a)	-
5.1 (shall conform to FG 150 grade,appropriate, specified in IS 210.)	-

Partial

-
-

279

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Classification - IS 444)	-
5 (Lining - IS 444)	-
5 (Reinforcement - IS 444)	-
5 (Lining and Cover - IS 444)	-
6.1- Table 1 (Internal diameters - ISO 4671)	-
6.2 (Concentricity - ISO 4671)	-
6.3 (Length -IS 4671)	-
6.4 ( thickness of the lining plus cover - ISO 4671)	-
6.4 (If the cover is fluted, the depth of the flutes - ISO 4671)	-
7.1 - Table 2 ( tensile strength of Lining - ISO 37 )	-
7.1 - Table 2 ( tensile strength of Cover - ISO 37 )	-
7.1 - Table 2 (elongation at break of Lining - ISO 37)	-
7.1 - Table 2 (elongation at break of Cover - ISO 37)	-
7.1 - Table 2 (Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-
7.1 - Table 2 (Change in tensile strength of Cover from original value after ageing(max) - ISO 188 and ISO 37)	-
7.1 - Table 2 (Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-
7.1 - Table 2 (Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-
7.2 - Table 3 (Proof pressure at 23 °C - ISO 1402)	-
7.2 - Table 3 (Change in length at proof pressure - ISO 1402)	-
7.2 - Table 3 (Minimum burst pressure - ISO 1402)	-
7.2 - Table 3 (Flexibility at 23 °C - Method A of ISO 1746)	-
7.2 - Table 3 (Low-temperature flexibility - Method B of ISO 4672)	-

Partial

-
-

280

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (Dimensioas of Cylinderical Vertical Tank)	-

Partial

-
-

281

IS 1626 : Part 3 (1994)

Asbestos Cement Building types and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings - Part 3 : Roofing Fittings

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Dimensions)	-
7 (Genaral appearance and finish)	-
6.1 (Physical requirements)	-
6.2 (Impermeability test according to the Method 1 described in IS 5913 : 1989)	-

Partial

-
-

282

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

283

IS 5312 : Part 1 (2004)

Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes - Part 1 : Single-Door Pattern

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Nominal Pressure)	-
4 (Nominal Sizes)	-
4.1.1 (Actual bore)	-
6.2 (Manufacture Dimensions Table 2 )	-
6.2 (Manufacture Dimensions Table 2 )	-
6.4 (Manufacture )	-
6.5 (Manufacture )	-
6.5 (Manufacture )	-
6.7 (Manufacture )	-
6.8 (Manufacture )	-
6.9 (Manufacture )	-
6.9 (Manufacture )	-
6.9 (Manufacture )	-
6.10 (Manufacture )	-
6.10.1 (Manufacture )	-
6.12 (Door Faces)	-
6.13 (By-pass arrangements)	-
6.13.1 (By-pass arrangements)	-
6.13.1 (By-pass arrangements)	-
8.2 (Hydrostatic Body Test )	-
8.3 (Hydrostatic Seat Test)	-

Complete

-
-

284

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-

Partial

-
-

285

IS 9763 (2000)

Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl. 5) (Nominal Size)	-
(Cl. 7) (Identification)	-
(Cl. 7) (Identification)	-
(Cl. 4) (Materials)	-
(Cl.6 , Table 3) (Dimensions)	-
(Cl 8) (Construction,Workmanship and Finish)	-
(Cl 8) (Construction,Workmanship and Finish)	-
(Cl 8) (Construction,Workmanship and Finish)	-
(Cl 8.4) (Minimum Thickness)	-
(Cl. 8.5) (Finish)	-
(Cl 9.2) (Drip Proofness Test)	-
(Cl 9.3) (Thermal Shock Test )	-
(Cl 9.4) (Hydraulic Pressure Test)	-
(Cl 9.5) (Mechanical Strength Characteristics)	-

Partial

-
-

286

IS 9857 (1990)

Welding cables - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Conductor : Material )	-
5 (SEPARATOR)	-
6 (COVERING)	-
7 (CONDUCTOR : CONSTRUCTION )	-
8 (S E P A R A T O R)	-
9.1 (C O V E R I N G : Application )	-
9.2 (T h i c k n e s s o f C o v e r i n g)	-
9.3 (T o l e r a n c e on Thickness o f C o v e r i n g)	-
9.4 (A p p l i c a t i o n of C o v e r i n g)	-
9.5 (Colour of C o v e r i n g)	-
10.1 a) 1) (Annealing test - IS 10810: Part 1)	-
10.1 a) 2) (Conductor resistance tes - IS 10810 : Part 5)	-
10.1 c) 1) (Physical tests for covering : Tensile strength )	-
10.1 c) 1) (Physical tests for covering : Elongation at break )	-
10.1 c) 2) (Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-
10.1 c) 2) (Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-
10.1 c) 3) (Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-
10.1 c) 3) (Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-
10.1 c) 4) (Physical tests for covering - Oil Resistance : Tensile strength variation )	-
10.1 c) 4) (Physical tests for covering - Oil Resistance : Elongation variation at break )	-
10.1 c) 5) (Hot set test )	-
10.1 c) 5) (Permanent set )	-
11.1 (High Voltage Test ( Water Immersion Test ))	-
11.3 (Static Flexibility Test)	-
11.4 (Flammability Test)	-
12.1 (Manufacturer's Identification)	-
12.2 (Cable Identification)	-
12.3 (Cable Code)	-
13.1 (Packing )	-
13.2 (Marking)	-

Complete

-
-

287

IS 9758 (1981)

Specification for flush valves and fittings for water closets and urinals

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 5 (Manufacture & Construction)	-
cl 6.1 to 6.3 (Performance requirements)	-
cl 7.1 (Hydraulic pressure test)	-
cl 8 (Finish)	-

Partial

-
-

288

IS 1364 : Part 1 (2018)

Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Dimensions- d)	-
4-Table 3 (Machined test pc- Proof stress)	-
4-Table 3 (Machined test pc- Tensile Strength)	-
4-Table 3 (Machined test pc- Elongation)	-
4-Table 3 (Full size bolts- Ultimate tensile strength)	-
4-Table 3 (Proof load test)	-
4-Table 3 (Surface Integrity Test )	-
4-Table 3 (Galvanization- Uniformity of Zinc Coating)	-
4-Table 3 (Galvanization - Mass of zinc coating- Min Individual)	-
4-Table 3 (Galvanization - Mass of zinc coating- Min Average)	-
4-Table 3 (Galvanization - Adhesion of Zinc Coating)	-

Partial

-
-

289

IS 9396 : Part 1 (1987)

Specification for round open top sanitary cans for foods and drinks: Part 1 tinplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Tinplate Thickness and Dimension : Thickness)	-
3.2 (Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-
3.2 (Tinplate Thickness and Dimension: width)	-
3.2 (Tinplate Thickness and Dimension : length)	-
3.2 (Tinplate Thickness and Dimension : Edge camber)	-
3.2 (Tinplate Thickness and Dimension :Out of squareness of sheet )	-
3.2 (Tinplate Thickness and Dimension : Flatness)	-

Partial

-
-

290

IS 1363 : Part 3 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ˜C ™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3-Table 1 (Dimensions-D)	-
3-Table 1 (Dimensions-P)	-
3-Table 1 (Dimensions-dw(minimum))	-
3-Table 1 (Dimensions-e(minimum))	-
3-Table 2 (Dimensions-m(minimum))	-
3-Table 1 (Dimensions-m(maximum))	-
3-Table 1 (Dimensions-mw(minimum))	-
3-Table 1 (Dimensions-s(minimum))	-
3-Table 1 (Dimensions-s(maximum))	-
3-Table 2 (Dimensions-D)	-
3-Table 2 (Dimensions-P)	-
3-Table 2 (Dimensions-dw(minimum))	-
3-Table 2 (Dimensions-e(minimum))	-
3-Table 2 (Dimensions-m(minimum))	-
3-Table 2 (Dimensions-m(maximum))	-
3-Table 1 (Dimensions-mw(minimum))	-
3-Table 2 (Dimensions-s(minimum))	-
3-Table 2 (Dimensions-s(maximum))	-
4-Table 3 (General requirements)	-

Partial

-
-

291

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3/3.1 (for valve refer IS 9081) (MATERIALS, FORM AND FIT)	-
3/3.3 (Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-
4/4.1.1 (Elongation at break (Class A' Tubes))	-
4/4.1.1 (Elongation at break (Class B' Tubes))	-
4/4.1.2 ( Strength of Splice (Class A' Tubes))	-
4/4.1.2 ( Strength of Splice (Class B' Tubes))	-
4/4.1.3 Refer annex B (Set After Ageing(Class A' Tubes))	-
4/4.1.3 Refer annex B (Set After Ageing(Class B' Tubes))	-
4/4.1.4 Refer annex C (Accelerated Ageing(Both Class A and Class B))	-
5 (AIR TIGHTNESS)	-

Complete

-
-

292

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10 (Hardness & Tensile Test)	-
Cl 13 (Length, Diameter, Wall Thickness & Ovality)	-

Partial

-
-

293

IS 10701 (2012)

Structural plywood - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.4.1 (Resistance to Water)	-
11.4.2 (Resistance to Water)	-
11.6 (Tensile Strength)	-
11.7.1 (Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-
11.8 (Wet Bending Strength)	-
Clause 11.2 (Moisture content)	-

Partial

-
-

294

IS 784 (2019)

Prestressed concrete pipes (Including Specials) - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5&5.1 table 1,i (Nominal Internal Diameter of Pipe)	-
5&5.1 table 1,ii (Minimum Core Thickness)	-
5.2 (Length)	-
5.3.2 (Internal Diameter)	-

Partial

-
-

295

IS 8035 (1999)

Handpump - Shallow well - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Visual Tests)	-
6.2 (Dimensional and Other Tests)	-
6.2.2 (Dimensional and Other Tests)	-
6.2.3 (Dimensional and Other Tests)	-

Partial

-
-

296

IS 4003 : Part 1 (1978)

Specification for pipe wrenches: Part 1 general purpose (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Dimensions- Nominal Size)	-
3 (Dimensions-Minimum capacity)	-
3 (Dimensions-Maximum capacity, D)	-
3 (Dimensions- Jaw Thickness,T min)	-
3 (Dimensions- Length of movablejae, l1)	-
3 (Dimensions- Length of Handle, l2)	-
3 (Dimensions- Width of Nut, N)	-
5 (Hardness- Jaws)	-
5 (Hardness- Handle of movable Jaw)	-
5 (Hardness- Shank of movable Jaw)	-
6.1 (Manufacture- Handel)	-
6.1 (Manufacture- Handel)	-
6.2 (Manufacture- Movable Jaw)	-
6.2 (Manufacture- Movable Jaw)	-
6.2 (Manufacture- Movable Jaw)	-
6.3 (Manufacture- Adjusting Nut)	-
6.3 (Manufacture- Adjusting Nut)	-
6.4 (Manufacture- Frame)	-
6.5 (Manufacture- Hinge Pin)	-
6.6 (Manufacture- Spring)	-
6.6 (Manufacture- Spring)	-
6.6 (Manufacture- Spring)	-
7 (Workmanship & Finish)	-
7 (Workmanship & Finish)	-
7 (Workmanship & Finish)	-
8 (Operation)	-
8 (Operation)	-

Complete

-
-

297

IS 650 (1991)

Standard sand for testing cement - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1 (shall be of quartz, light grey or whitish variety and shall be free from silt. The sand grains shall be angular, the shape of the grains approximating to the spherical form; elongated and flattened grains being present only in very small or negligible quantities)	-
Cl. 4.2 (Sieve test and particle size distribution)	-

Partial

-
-

298

IS 9968 : Part 2 (2002)

Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (CONDUCTORS: Cables for Fixed Installation)	-
4.2 (CONDUCTORS:Flexible Cables)	-
5 (INSULATION)	-
7.1 (Proofed Tape)	-
7.2 (Polyethylene Terephthalate ( P E T P ) or Polypropylene Base Tape : Thickness)	-
8 (SCREENING)	-
9 (CENTRE AND FILLERS)	-
10 (ARMOUR)	-
11.1 (Inner Sheath)	-
11.2 (Outer Sheath)	-
12.1 (Tapes)	-
13.1 & 13.2 (CONSTRUCTION:CONDUCTORS-Cables for Fixed Installations/Flexible Cables)	-
13.3 (Earthing Conductor)	-
13.3.1 (Earthing Conductor)	-
13.4 (Separator Tape)	-
14 (CONDUCTOR SCREENING)	-
15.1 (INSULATION : Application)	-
15.2 (Thickness of Insulation)	-
15.3 (Tolerance on Thickness of Insulation)	-
16.1 (INSULATION SCREENING : Application)	-
16.2 (INSULATION SCREENING : Parts )	-
16.3 (INSULATION SCREENING : Non Metallic Parts )	-
16.4 (INSULATION SCREENING : Metallic Parts )	-
17 (CORE IDENTIFICATION)	-
17 (CORE IDENTIFICATION: Unscreed cable )	-
18.1 (LAYING UP OF CORES)	-
18.2 (LAYING UP OF CORES : Flexible cable)	-
18.3 (LAYING UP OF CORES : Binder Tape)	-
19.1 (Inner Sheath : Application)	-
19.2 (Thickness of Inner Sheath)	-
19.3 (Inner Sheath : proofed tape)	-
20.1 (ARMOURING: Application)	-
20.2 (Type of Armour)	-
20.2 1.2 (Direction of lay of armour)	-
20.2 1.3 (Joint in armour)	-
21.1 (OUTER SHEATH)	-
21.2 (Coulor of Outer sheath)	-
21.3 (Thickness of Outer Sheat: Average)	-
21.3 (Thickness of Outer Sheat: Minimum)	-
22.1 a)1) (Annealing test (for copper) - IS 10810: Part 1)	-
22.1 a)2) (Tensile test (for aluminium) -IS 10810: Part 2)	-
22.1 a)3) (Wrapping Test (for aluminium) - IS 10810: Part 3)	-
22.1 a)4) (Conductor resistance test)	-
22.1 a)5) (Persulphate test (tinned copper conductor)- IS 10810: Part 4)	-
4.1 (CONDUCTORS: Cables for Fixed Installation)	-
4.2 (CONDUCTORS:Flexible Cables)	-
4.1 (CONDUCTORS: Cables for Fixed Installation)	-
4.2 (CONDUCTORS:Flexible Cables)	-
22.1 b)2)i) (Test for Galvanized Steel Wires/Formed Wires 2) Tensile Strentgh -IS 10810: Part 37)	-
22.1 b)2)ii) (Test for Galvanized Steel Wires/Formed Wires 2) Elongation at break -IS 10810: Part 37)	-
22.1 b)2)iii) (Test for Galvanized Steel Wires/Formed Wires 3) Torsion (for round wires only) -IS 10810: Part 38)	-
22.1 b)2)iv) (Test for Galvanized Steel Wires/Formed Wires 4) Winding (for strips only) -IS 10810: Part 39)	-
22.1 b)2)v) (Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Uniformity-IS 10810: Part 40)	-
22.1 b)2)vi) (Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Mass -IS 10810: Part 41)	-
22.1 b)2) vii) (Resistivity - IS 10810: Part 42)	-
22.1 c)2) (Physical Tests for Insulation : Tensile Strenth - IS 10810: Part 7)	-
22.1 c)2) (Physical Tests for Insulation : Elongation - IS 10810: Part 7)	-
22.1 c)3) (Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth - IS 10810: Part 11)	-
22.1 c)3) (Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth Variation - IS 10810: Part 12)	-
22.1 c)3) (Physical Tests for Insulation( Ageing in air oven) : Elongation - IS 10810: Part 11)	-
22.1 c)3) (Physical Tests for Insulation( Ageing in air oven) : Elongation variation - IS 10810: Part 12)	-
22.1 c)4) (Physical Tests for Insulation ( Ageing in air bomb): Tensile Strenth variation - IS 10810: Part 56)	-
22.1 c)5) (Physical Tests for Insulation :Hot set Elongation - IS 10810: Part 30)	-
22.1 c)5) (Physical Tests for Insulation :Permanent set - IS 10810: Part 30)	-
22.1 c)2) (Physical Tests for Sheath : Tensile Strenth - IS 10810: Part 7)	-
22.1 c)2) (Physical Tests for Sheath : Elongation - IS 10810: Part 7)	-
22.1 c)3) (Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth - IS 10810: Part 11)	-
22.1 c)3) (Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth Variation - IS 10810: Part 12)	-
22.1 c)3) (Physical Tests for Sheath ( Ageing in air oven): Elongation - IS 10810: Part 11)	-
22.1 c)3) (Physical Tests for Sheath ( Ageing in air oven): Elongation variation - IS 10810: Part 12)	-
22.1 c)10) (Loss of mass in air oven : Sheath - IS 10810: Part 10)	-
22.1 c)6) (Physical Tests for Sheath(Oil resistance test) : Tensile Strenth Variation - IS 10810: Part 31)	-
22.1 c)6) (Physical Tests for Sheath ( Oil resistance test): Elongation Variation - IS 10810: Part 31)	-
22.1 c)7) (Tear Resistance test - IS 10810: Part 17)	-
22.1 c)5) (Physical Tests for Sheath :Hot set Elongation - IS 10810: Part 30)	-
22.1 c)5) (Physical Tests for Sheath :Permanent set - IS 10810: Part 30)	-
22.1 c)8) (Shrinkage test : Sheath - IS 10810: Part 12)	-
22.1 c)8) (Shrinkage test - Crack oberved : Sheath - IS 10810: Part 13)	-
22.1 c)9) (Hot deformation test : Sheath - IS 10810: Part 15)	-
22.1 c)11) (Heat shock : Sheath - IS 10810: Part 14)	-
22.1 c)12) (Thermal stability : Sheath - IS 10810: Part 60)	-
22.1 d) (Insulation Resistance Test: Volume resistivity )	-
22.1 d) (Insulation Resistance Test: Insulation resistance constant )	-
22.1 k) (High Voltage Test for Four Hours)	-
22.1 n) (Flammability)	-

Partial

-
-

299

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Minimum Thickness)	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Minimum Socket Length)	-
Cl. 6.1 (Stress Relief Test- Appendix A)	-

Partial

-
-

300

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Marking)	-
10.1 (Dimentions)	-
10.2 (Dimentions)	-
11.1 (Accessibility of live parts )	-
11.2 (Accessibility of live parts )	-
11.3 (Accessibility of live parts )	-
11.4 (Accessibility of live parts )	-
11.4.1 (Accessibility of live parts )	-
12.1 (Provision for Earthing)	-
12.2 (Provision for Earthing)	-
13.1 (Terminals)	-
13.2 (Terminals)	-
13.3 (Terminals)	-
13.4 (Terminals)	-
13.5 (Terminals)	-
13.6 (Terminals)	-
13.7 (Terminals)	-
13.8.1 (Terminals)	-
13.8.2 (Terminals)	-
13.8.3 (Terminals)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
15.1 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.2 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.3 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.4 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.5 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.6 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
16 (Temperature Rise Test)	-
17 (Temperature Rise Test)	-
18 (Resistance to heat)	-
19 (Resistance to abnormal heat fire and tracking)	-
19.2 (Resistance to abnormal heat fire and tracking)	-
19.3 (Resistance to abnormal heat fire and tracking)	-
20.1 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
20.2 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
20.3 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
21.1 (CREEPAGE DISTANCE AND CLEARANCES)	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-

Partial

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

No Record Found