BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 [email protected]

Scope List

Reset

94 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
Rs.1819/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
Rs.1744/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
upto 600mm dia

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

- View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

57450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250	-
5.1(MANUFACTURE- IS 15907)	-	1050	-
5.2.1(Lamination- IS 15907)	-	250	-
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	250	-
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250	-
5.3.1(Construction- IS 15907)	-	4300	-
5.3.1(The width of the hem - IS 15907)	-	250	-
5.3.2(Finished width of pocket - IS 15907)	-	1150	-
5.4(Bonding- IS 15907)	-	1000	-
6- Table 1- SL.No (i)(Mass)	-	250	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1350	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1100	-
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	2450	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	2200	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1350	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1100	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1350	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1100	-
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1450	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	19000	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1350	-
6.1(Length -IS 15907)	-	250	-
6.1(Width - IS 15907)	-	250	-
6.1(Height - IS 15907)	-	250	-
6.2(Water Proofness,IS 7941)	-	1350	Before Ageing
6.2(Water Proofness, IS 7940)	-	1000	After Ageing and Ageing (70 °C/168 h) (168 x 25) - 4200/-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2250	-

Complete

31 Dec, 2023

-
-

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

94200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	500	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	250	-
6.3.2(Length of Pipe)	-	250	-
8.1.1 Table-10 (iv)(Creep ratio)	-	26300	-
6.3.3(Out Side Diameter)	-	250	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	The testing charges has alredy been taken in cl. no. 8.1.1
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	The testing charges has alredy been taken in cl. no. 6.3.5.2
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	300	-
6.3.5.2(Wall Thickness(e4 min))	-	250	-
9 Table 12 (ii)(Water tightness)	-	1000	-
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	The testing charges has alredy been taken in cl. no. 6.3.5.2
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	39000	-
7.1(Appearance)	-	300	-
7.1.1(Color of Finished Pipes)	-	300	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1100	-

Complete

31 Dec, 2023

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

24480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	450	Nil
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	Nil
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	250	Nil
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	Nil
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700	Nil
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	Nil
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400	Nil
3.2(Unlaminated Fabric Mass )	-	250	NIl
3.3.1(Bottom seam (IS 10789))	-	250	Nil
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	300	Nil
4.2 and Table 1 ii(Dimensions )	-	250	Nil
5.2 and Table 1 iii(Ends per dm )	-	250	Nil
5.2 and Table 1 iv(Picks per dm )	-	0	Charges all ready taken in End per dm test
4.2 and Table 1 v(Mass of sack )	-	300	Nil
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	Nil
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	Nil
4.2 and Table 1 viii(Elongation at break of fabric )	-	1100	Nil
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	Test charges Rs. 2200/- plus UV Exposure charges Rs. 10180/- (25% discount is not applicable in exposure charges)
4.2 and Table 1 x(Ash content )	-	950	Nil

Complete

31 Dec, 2023

-
-

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

121275.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	4000.00	(Material Identification) 2000.00+ (Presence of UV-stabilizer) 2000.00
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	750.00	Test Charges for 250.00 (Width ) + 500.00 (Linear Density)
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250.00	Ends/dm
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250.00	Picks/dm
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	Test Charges is already taken in clause 4.2
5,5.1(MANUFACTURE Lamination )	-	2000.00	Presence of UV-stabiliser
5,5.1(MANUFACTURE Lamination )	-	2000.00	Material Identification
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	250.00	Coating Thickness
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	Test Charges is already taken in clause 5.5.2
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	250.00	overlap distance
6. Table 2 i) IS 1964 (Mass)	-	250.00	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	1350.00	1100.00 (breaking strength) + 250.00 (specimen charges)
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	1350.00	1100.00 (breaking strength & elongation at break) + 250.00 (specimen charges)
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	Test Charges is already taken in clause 6.0 (Breaking strength before UV exposure)
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	90350.00	1100.00 (Retention of breaking strength) + 250.00 (specimen charges) + 89,000.00 (UV exposure of 500 h)
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	1350.00	1100.00 (Retention of breaking strength) + 250.00 (specimen charges)
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	1375.00	875.00 (Abrasion resistance) + 500.00 (specimen charges)
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	1350.00	1100.00 (Trapezoid tear strength)+ 250.00 (specimen charges)
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	1350.00	1100.00 (Trapezoid tear strength)+ 250.00 (specimen charges)
6. Table 2 vii) Annex C (Puncture strength)	-	1350.00	1100.00 (Puncture strength)+ 250.00 (specimen charges)
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	1200.00	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	1800.00	Conditioning Charges
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	Test charges is already taken in clause 6 (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap way)
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	1100.00	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	250.00	-
6.2(Workmanship)	-	300.00	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	1600.00	1100.00 (Hydrostatic Burst Pressure Test)+ 500.00 (specimen charges)
6.4 , 6.4.1(Proof Pressure Tes)	-	1600.00	1100.00 (Proof Pressure Test)+ 500.00 (specimen charges)
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	250.00	-
6.6(Kink Test :)	-	1100.00	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	1350.00	1100.00 (Welded Seam Strength After UV Exposure)+250.00 (specimen charges)
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	1100.00	-
8(PACKING)	-	0	-

Complete

31 Dec, 2023

-
-

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

- View breakup
For Class ATest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×1300) (1400 hrs): Rs.2,46,500/- For Class BTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×2350) (2450 hrs) : Rs.4,30,250/- For Class CTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×3970) (4070 hrs): Rs.7,13,750/- For Class DTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×4570) (4670 hrs): Rs.8,18,750/- For Class ETest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×5730) (5830 hrs): Rs.10,21,750/- For Class FTest Charges: Rs.24,550/- (25% Discount to BIS)+ Sample Preparation Charges: Rs.2250/- + UV exposure test charges (190×100+175×7250) (7350 hrs): Rs.12,87,750/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Revised 2019 Version Included w.e.f. 24.07.2019

IS 4669 (1968)

Methods of test for polyvinyl chloride resins

- View breakup
Rs.4238/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included w.e.f. 29.06.2017.

IS 4761 (1968)

Specification for unsupported pvc rainwear

- View breakup
Rs.5038/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included w.e.f. 29.06.2017.

IS 2076 (1981)

Specification for unsupported flexible polyvinyl chloride sheeting (First Revision)

- View breakup
Rs.9140/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included w.e.f. 29.06.2017.

IS 11197 (1985)

Specification for monoaxially oriented polypropylene tapes

- View breakup
Rs.4238/-, (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included w.e.f. 29.06.2017.

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

- View breakup
Rs.7838/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	1300	-
2.2(Manufacture)	-	750	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(socket length)	-	0	The testing charges of cl. no.. 2.2.3 has already been taken in cl. no. 2.2.3 (inside diameter of the socket).

Complete

31 Dec, 2023

-
-

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 09(90 )	-	0	-
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	The testing chrges of cl. no. 2.2.3 has already been taken in cl. no. 2.2.3 (Inside diameter of the socket).

Complete

31 Dec, 2023

-
-

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 05(40 (Z) )	-	0	-
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	250	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	The testing charges for cl no. 2.2.2 has already been taken in cl. no. (Table 1 - 45' Tees Laying Length, Z)
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	The testing charges for cl no. 2.2.3 has already been taken in cl. no. 2.2.3 (Inside diameter of the socket).

Complete

31 Dec, 2023

-
-

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Socket Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2023

-
-

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

7294 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	1050	-
2.2(Manufacture)	-	1050	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(Union Laying Length)	-	250	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	0	-

Complete

31 Dec, 2023

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

- View breakup
Rs.4219/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 8069 (1989)

High density polyethylene (HDPE) woven sacks for packing pesticides – Specification (second revision)

- View breakup
Rs.3088/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included w.e.f. 29.06.2017.

IS 13217 (1991)

Thermoplastics fumigation covers

- View breakup
Rs.30550/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included w.e.f. 29.06.2017.

IS 5378 (1994)

Polyethylene cane - Specification (First Revision)

- View breakup
Rs.3225/-, Rs.1988/- For Material (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included on 29-05-2015

IS 6192 (1994)

Textiles – Monoaxially oriented high density polyethylene tapes – Specification (second revision)

4600 View breakup
Rs.3450/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(MATERIAL(Refer IS 7328 :1974))	-	500	Nil
5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1))	-	500	Nil
5.2(Tenacity (For test method Refer IS 6193:1971))	-	550	Nil
5.3(Elongation (For test method Refer IS 6193:1971))	-	550	Nil
5.4(Finished width (For test method Refer IS 6193:1971))	-	250	Nil
5.5(Thickness (For test method Refer IS 6193:1971))	-	200	Nil
5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971) )	-	850	NIl
5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971) )	-	850	Nil
5.7( pigmented tapes)	-	0	Nil
5.7( pigmented tapes(Refer IS 2454))	-	850	Nil

Complete

31 Dec, 2023

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found