BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 [email protected]

Scope List

Reset

94 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

32825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1300	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
9.1(PIPE ENDS)	-	0	-
8(SEALING RINGS)	-	0	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.2.1(DIMENSIONS-Socket)	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	The test charges has already been taken in cl. no. 7.2.1.2-Table 4
Clause 10.7(Sulphated Ash Content)	-	950	-
10.1(Colour)	-	0	-
D-2.1.2.4(Effect on Water Test)	-	3000	-
7.2.1.1 Table3 (Angle of taper (Note-1))	-	0	-
10.1(Surface Finish)	-	0	-
6.1.2(PVC Resin)	-	4100	VCM Content + K-Value

Complete

31 Dec, 2023

-
-

IS 14635 : Part 1 (2020)

Fluoropolymer Dispersions and Moulding and Extrusion Materials Part 1 Designation System ( First Revision )

7300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5.1.1.1(Standard Specific Gravity in accordance with IS 14635 part 2)	-	500.00	-
4.5.1.1.3(Bulk Density)	-	500.00	-
4.5.1.1.5(Tensile Properties (Tensile stress) in accordance with IS 13360 (Part 5/Sec 2))	-	1350.00	1100.00 (Testing Charge) + 250.00 (Conditioning charge)
4.5.1.1.5(Tensile Properties (Elongation) in accordance with IS 13360 (Part 5/Sec 2))	-	1350.00	1100.00 (Testing Charge) + 250.00 (Conditioning charge)
4.5.1.1.6(Dielectric strength (IEC 60243-1 or ASTM D 149))	-	1350.00	1100.00 (Testing Charge) + 250.00 (Conditioning charge)
4.5.1.1.9(Melting Peak Temperature in accordance with IS 14635 (Part 2)	-	2250.00	2200.00 (Testing Charge) + 250.00 (Conditioning charge)

Complete

31 Dec, 2023

-
-

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

50450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4( Line/ Cord beading IS 7903)	-	250	Nil
4.0(Types IS 7903)	-	250	Nil
5.1.1(Lamination IS 7903)	-	1050	Nil
5.1.2(Lamination IS 7903)	-	1050	Nil
5.2.1(Construction IS 7903)	-	250	Nil
5.2.1(Construction IS 7903)	-	250	Nil
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.3(Joint/Seam, IS 7903)	-	250	Nil
5.4(Fixing of Eyelets, IS 7903)	-	250	Nil
5.4(Fixing of Eyelets ,IS 7903)	-	0	Charges already taken in clause no. 5.4
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	250	Nil
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	500	Nil
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	1100	Nil
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	1100	Nil
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	1100	Nil
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	29950	Test charge Rs. 2200/- plus UV exposure charges Rs. 27750/-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	1100	Nil
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	1100	Nil
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	1100	Nil
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1100	Nil
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	1100	Nil
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	850	Nil
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	950	Nil
6.2(Length, IS 7903)	-	250	Nil
6.2(Width, IS 7903)	-	250	Nil
6.2(height, IS 7903)	-	0	Charges already taken in clause no. 6.2
6.3(Water Proofness,IS 7941)	-	1000	Nil
6.3(Water Proofness, IS 7940)	-	5200	Test charge Rs. 1000/- plus ageing charges Rs. 4200/-
6.2(dimension(l))	-	0	Charges already taken in clause no. 6.2
6.2(dimension(w))	-	0	Charges already taken in clause no. 6.2
6.2(dimension(h))	-	0	Charges already taken in clause no. 6.2

Complete

31 Dec, 2023

-
-

IS 11066 (2014)

Fibre ropes ¬– Polyester 3-, 4-, 8- and 12- strand ropes (second revision)

7250.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation)	-	2000.00	-
5(General requirements)	-	2000.00	-
5.1 Fig. 1 / Fig. 2 / Fig. 3 / Fig. 4(Polyester ropes shall be made in one of the following constructions:)	-	0	-
5.2 Cl.4 of IS/ISO 9554(Construction &manufacture)	-	600.00	-
5.2 Cl.5 of IS/ISO 9555(Lay)	-	250.00	-
5.2 Cl.7 of IS/ISO 9556(Labelling and Marking)	-	250.00	-
5.2 Cl.8 of IS/ISO 9557(Packaging, invoicing and delivery lengths)	-	0	Test charge is already included in 5.2 cl.7
6 Table 1 / Table 2 / Table 3(Linear density)	-	500.00	-
6 Table 1 / Table 2 / Table 3(Minimum breaking force a) Unspliced ropes)	-	1100.00	-
6 Table 1 / Table 2 / Table 4(Minimum breaking force b) Ropes with eye-spliced terminations)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes
6 Table 1 / Table 2 / Table 3(Minimum breaking force a) Unspliced ropes)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes
6 Table 1 / Table 2 / Table 4(Minimum breaking force b) Ropes with eye-spliced terminations)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes
6 Table 1 / Table 2 / Table 3(Minimum breaking force a) Unspliced ropes)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes

Complete

31 Dec, 2023

-
-

IS 14399 : Part 1 and 2 (1996)

Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (GRP) Sectional Water Storage Tanks : Part 1 palels, Part 2 Guidelines for assembly, installation and test

10825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Flange of Panels)	-	250	-
6.1.1(Flange of Panels)	-	0	-
6.2(Flange of Panels)	-	0	-
6.3(Flange of Panels)	-	0	-
6.4(Type/Thickness of panel)	-	250	-
7.0(Visual inspection of the panels)	-	300	-
8, Table-1, Annex-B(Tensile Strength)	-	1600	-
8, Table-1, Annex-C(Bending strength)	-	1600	-
8, Table-1, Annex-D(Elastic moduius in Bend)	-	1600	-
8, Table-1, Annex-E(Glass Content)	-	950	-
8, Table-1, Annex-F(Barcoal Hardness)	-	375	-
8, Table-1, Annex-G(Water Absorption)	-	1100	-
9, Annex-H(Hydrostatic Test)	-	850	-
10.0(Deflection Test)	-	1100	-
Clause 11.3 annex J(As)	-	0	-
Clause 11.3 annex J(Cd )	-	0	-
Clause 11.3 annex J(Cr)	-	0	-
Clause 11.3 annex J(Pb)	-	0	-
Clause 11.3 annex J(Se)	-	0	-
5.0(DimensionSof Tank)	-	0	-
6.2(Assembly)	-	0	-
7.0(Leakage Test)	-	850	-

Complete

31 Dec, 2023

-
-

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

39005 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Workmanship)	-	250	-
Cl. 6.3(Accelerated ageing test)	-	4200	-
Cl. 6.4(water proofness test)	-	1000	-
Cl. 6.5(Strenght of joints/seams)	-	1100	-
Cl. 6.6(Flex test)	-	7200	Included Flex Test (After Ageing)50000 Cycles* - 1500.00/-
Cl. 7.1(Eyelets and rope lashing)	-	500	Included Ease of in-sito Repair 250/-
Cl 5(Construction)	-	1675	Included Carbon black content - 925/-, Panel - 250/-, Ends & sides dimension - 250/-, Panel Length & Width - 250/-
Table1 - v)(Dart Impact Strength)	-	850	-
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	2200	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- MN Medium)	-	2200	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- HN Heavy)	-	2200	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- LN light)	-	1100	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- MN Medium)	-	1100	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- HN Heavy)	-	10180	UV Exposure

Complete

31 Dec, 2023

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

17880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.3(Sacks)	-	300	-
4.3.1(Bottom Seam)	-	300	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	Testing charge is already taken in 5.2 clause of Dimension of Inside width.
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	300	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	-
5.2 and Table 1 x(Ash content )	-	950	-

Complete

31 Dec, 2023

-
-

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

157725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	300	-
6.2.1 Annex B(Chloride Content of Resin)	-	4300	-
6.3(Compound Properties)	-	4300	-
6.3.1 Annex B(Chloride content)	-	0	CHARGES IS ALREADY HAS TAKEN IN CLAUSE NO. 6.2.1.
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	11000	RUPEES 11,000/- FOR TESTING CHARGES AND RUPEES 300/- FOR SPECIMEN/CONDITIONING CHARGES*
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
7.1.3 (Effective length)	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
8(Pipe Ends)	-	300	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8
9.2 IS 12235 (Part 3)(Opacity)	-	575	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	-
9.6 IS 12235(Part 14)(Density)	-	500	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	16650	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	RUPEES 1,000/- FOR TESTING CHARGES AND RUPEES 1,09,500/- FOR SPECIMEN/CONDITIONING CHARGES*
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1400	RUPEES 1,100/- FOR TESTING CHARGES AND RUPEES 300/- FOR SPECIMEN/CONDITIONING CHARGES*
10.4 IS 12235(Part 19)(Flattening Test)	-	500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1600	RUPEES 1,100/- FOR TESTING CHARGES AND RUPEES 500/- FOR SPECIMEN/CONDITIONING CHARGES*
7.1.2(Wall Thickness (Maximum))	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
7.1.1(Outside Diameter at any point (Maximum))	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
5 Table 1(Classification of pipes)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 5 Table 1 (Classification of pipes).
6.2.1 Annex B(Chloride Content of Resin)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 6.2.1 ANNEX B (CHLORIDE CONTENT OF RESIN)
6.3(Compound Properties)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 6.3 (COMPOUND PROPERTIES)
6.3.1 Annex B(Chloride content)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 6.3.1 ANNEX - B
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 6.3.2.
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 7.1 7.1 IS 12235 (Part 1) Table 2
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 7.1.7.1.1 IS 12235.
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 7.1.2 IS 12235 (Part 1).
7.1.3 (Effective length)	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
8.0(Pipe Ends)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. - 8.0
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8
9.2 IS 12235 (Part 3)(Opacity)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 9.2
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	CHARGES HAS ALREADY TAKEN.
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	CHARGES HAS ALREADY TAKEN.
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	CHARGES HAS ALREADY TAKEN.
9.6 IS 12235(Part 14)(Density)	-	0	CHARGES HAS ALREADY TAKEN.
10.0(Mechanical Properties)	-	0	CHARGES HAS ALREADY TAKEN.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	CHARGES HAS ALREADY TAKEN.
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	CHARGES HAS ALREADY TAKEN.
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	CHARGES HAS ALREADY TAKEN.
10.4 IS 12235(Part 19)(Flattening Test)	-	0	CHARGES HAS ALREADY TAKEN.
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	CHARGES HAS ALREADY TAKEN.
15.4 (b)(Cold impact)	-	0	CHARGES HAS ALREADY TAKEN.

Complete

31 Dec, 2023

-
-

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

61950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500	-
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	-
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	1100	-
8.2.2(Mechanical Characteristics of Fittings)	-	0	-
8.3(Joints)	-	2300	-
9 (Table 12)(Performance Requirements)	-	1150	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
5.1(Composition of the material)	-	0	-
6.1(Wall Construction Designated as Type A)	-	300	-
6.2(Deswignation)	-	0	-
6.3(Dimensions of pipes and fittings)	-	0	-
6.3.1 Table 2(Mean outside diameter)	-	0	-
6.3.2 Table 3(Wall thickness)	-	0	-
6.3.3 Fig 2(Length of pipe)	-	0	-
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	0	-
6.3.4.1(Wall thickness of sockets)	-	0	-
6.3.4.2(Fabricated fittings)	-	0	-
6.3.4.3(Rotational moulded fittings)	-	0	-
6.3.4.4(Type of fittings)	-	0	-
7.1(Appearance)	-	300	-
7.2(Colour )	-	0	-
7.3(Vicat softening temperature of pipes)	-	1100	-
7.4(Resistance to Dichloromethane)	-	1000	-
7.5(longitudinal reversion)	-	950	-
8.1(Appearance and colour)	-	300	-
8.2(Vicat softening temperature of fittings)	-	1400	-
8.3(Effect of Heating (Stress Relief Test))	-	950	-
9.1(Ring stiffness)	-	1400	-
9.2(Resistance to external blows at o C)	-	1400	-
9.3(Ring flexibility)	-	1100	-
9.4(Creep ratio)	-	26300	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100	-
11.0(Joints)	-	0	-
11.1(Elastomeric Sealing Rings)	-	0	-
11.2(Solvent cement)	-	0	-
12.1(Elastomeric Sealing Ring Joints)	-	1150	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	0	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	2300	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.2(Solvent cement joints)	-	1150	-
12.2.1(Tightness of Solvent cemented Ring Joints )	-	0	-
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	2300	-
5.2 Table 1(Composition of the material)	-	11300	-

Complete

31 Dec, 2023

-
-

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

26350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	500	-
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	11850	Resistant To Hydrostatic Pressure Test for 1000 h(Type test) and Hydrostatic Pressure Test for 1 hr (Acceptence test)
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	-
7.3( Opacity)	-	575	-
8.2 table-9( Pipe Ends)	-	250	-
5.3(VCM Content)	-	3000	-
5.4( K-Value)	-	1100	-
5.6 / 5.6.1( Material Classification, table -1)	-	0	-
6.0(CLASSIFICATION OF PIPES, table-2)	-	0	-
7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance)	-	300	-
7.2( Colour)	-	250	-
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	500	-
8.1.2, table 4 to 7(Wall Thickness)	-	0	The test charges has already been taken in the cl. no. 8.1.1, 8.1.1.2, table-3 (Dimension of Pipes.
8.1.3 (Length, meter)	-	0	-
8.2 table-9(Dimensions of Integral Socket)	-	300	-
9.3 table-12( Ring Stiffness)	-	1400	-
9.4, annexure-E( Orientation Factor)	-	900	-
11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints)	-	1000	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	1000	-
11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-	1000	cl. no. 11.0 (table 13, 14, 15,16) Test : Long Term Pressure testing for assemble joint at 27 degree centigrade - charges 11,000.00 Test : Long Term Pressure testing for assemble joint at 40 degree centigrade - charges 11,000.00
12(a)( ELASTOMERIC SEALS)	-	1050	-
12(b)( ELASTOMERIC SEALS)	-	375	-

Complete

31 Dec, 2023

-
-

IS 17358 : Part 1 (2020)

Agro textiles “ Fencing nets for agriculture and horticulture purposes “ Specification Part 1 Fencing nets made from extruded polymer mesh

21410.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, table 1,2,3(MATERIALS)	-	6500.00	6200.00 (Test charge)+ 300.00 (specimen/conditioning charge)
5,/ 5.1( MANUFACTURE (a)Hexagonal shape (see Fig. 1);(b) Diamond shape (see Fig. 2); and c) Square shape (see Fig. 3))	-	0	-
5.2(Colour)	-	250.00	-
6.0(TYPES ,(a)Light duty, b) Medium duty, and c) Heavy duty.)	-	0	-
7.0( REQUIREMENTS)	-	14160.00	5900.00 (Test Charge) + 8260.00 (UV-Exposure of 144 hrs)+ 500.00 (specimen charges of tensile and elongation before UV-exposure)

Complete

31 Dec, 2023

-
-

IS 4572 (2014)

Fibre ropes – Polyamide 3- 4- 8- and 12-Strand ropes

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.1 Polyamide ropes( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-	3150	Testing Charge for the clauses 5.1 to 5.5
Cl.6 Tables 1, 2 and 3.(Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-	2350	Testing Charge for the clauses 6.1 to 6.3
Cl.5.1 Polyamide ropes( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-	0	Testing Charges is taken in the clause 5.1
Cl.6 Tables 1, 2 and 3.(Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-	0	Testing Charges is taken in the clause 6
Cl.5.1 Polyamide ropes( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-	0	Testing Charges is taken in the clause 5.1
Cl.6 Tables 1, 2 and 3.(Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-	0	Testing Charges is taken in the clause 6

Complete

31 Dec, 2023

-
-

IS 16205 : Part 24 (2017)

Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground

16375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 Table 101(Dimensions)	-	250	NIL
8 Table 101(Dimensions)	-	0	Testing charge is already taken in clause 8.0 table 101 (Dimensions)
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	300	Nil
10.1(Mechanical Strength )	-	1600	1100 testing charge+500 conditioning/specimen charge (25% discount is not applicable to conditioning/specimen charge)
10.2(Compression Test)	-	0	Testing charge is already taken in clause 10.1 (mechanical strength)
10.3(Impact Test)	-	1600	1100 testing charge+500 conditioning/specimen charge (25% discount is not applicable to conditioning/specimen charge)
10.4(Bending Test)	-	2000	Nil
13.1.3(Spread of fire)	-	3650	NIL
14.0(External Influences)	-	10000	NIL
15.0(Electromagnetic Compatibility)	-	300	NIL
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	1350	-
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	0	-
6.1.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - Tensile Strength)	-	0	-

Complete

31 Dec, 2023

-
-

IS 13410 (1992)

Glass reinforced polyester sheet moulding compounds(Smc) - Specification

- View breakup
Rs.24825/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

42575.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(QUICK COUPLED PIPES)	-	925.00	Test charges for Carbon Black Content test
Cl.3(Quick Coupled pipes)	-	700.00	Charges for Carbon Black dispersion test
4.1 (b)(HDPE couplers —)	-	1000.00	Charges for Density (Male and female both)
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1850.00	Charges for Melt flow rate (both male and female)
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1400.00	-
4.1 .1.2.1(HDPE couplers)	-	2200.00	Melt flow rate (both male and female)
4.1 .3(Workmanship and Appearance)	-	300.00	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.1.5(Rubber Ring)	-	1050.00	Material Identification
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375.00	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	4575.00	Test charges Rs. 375.00 + ageing charges for rubber ring Rs. 4200.00
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300.00	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500.00	-
6.1.1, 6.1.1.1(Leakage Test)	-	850.00	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850.00	-
6.1.2.2( Hydraulic Proof Test)	-	0	test charges is already taken in 6.1.2, 6.1.2.1 (Hydraulic Proof Test)
6.1.3, 6.1.3.1(Weldability Test)	-	1600.00	-
6.1.3.1.1(Weldability Test)	-	4800.00	-
6.1.3.2 (Quick coupled fittings)	-	0	-

Complete

31 Dec, 2023

-
-

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

22760.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Material)	-	1050	Nil
4.1(HDPE Mono filament)	-	2500.00	Nil
4.1(HDPE Mono filament)	-	500.00	Nil
4.1.1(HDPE Mono filament)	-	700.00	Nil
4.2(Fabric)	-	500.00	Nil
4.3(Colour)	-	300.00	Nil
5.0(Types)	-	1000.00	Nil
6.1(Dimensions and mass)	-	250.00	Nil
6.2(Dimensions and mass)	-	250.00	Nil
6.2 Table 1(Mass g/m2,Min)	-	250.00	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-	2200.00	Nil
6.2 Table 1(Warpway Weftway)	-	2200.00	Nil
6.2 Table 1(Retention of breaking strength after UV exposure, N, Min)	-	8260.00	-
6.2 Table 1(Colour fastness to artificial light1)	-	850.00	Nil
6.2 Table 1(Bursting pressure, kgf/cm2, Min)	-	1000.00	Nil
6.2 Table 1(Shading %)	-	700.00	Nil

Complete

31 Dec, 2023

-
-

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

22760.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Types)	-	1000.00	Nil
6.1(Dimensions and Mass - IS 1954)	-	250	Nil
6.1(Dimensions and Mass - IS 1954)	-	250	Nil
6.2 Table 1(Mass - IS 1964)	-	250	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	2200	Nil
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	2200	Nil
6.2 Table 1(Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-	8260	25% discount is not application in conditioning charges
6.2 Table 1(Colour fastness to artificial light, IS 2454)	-	850	Nil
6.2 Table 1(Bursting Pressure, IS 1966 (Part 1 or 2))	-	1000	Nil
6.2 Table 1(Shading Percentage)	-	700	Nil

Complete

31 Dec, 2023

-
-

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

54375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	750	-
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	0	-
6.4(Length of pipe)	-	0	-
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	0	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	0	-
8.1(Hydraulic Charactristics, Annex-A)	-	25100	Included: Type test 100 hrs/20 degree Centigrade, Type test 1000 hrs/80 degree Centigrade. Acceptance test : Notched pipe 165 hrs./80 degree centigrade, Plain pipe 165 hrs. / 80 degree centrigrade.
8.2(Reversion Test. Annex-C)	-	700	-
8.3(Density, Annex A of IS 7328)	-	500	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	0	The Charges has already been taken in cl.no. 8.5 & Table-2 (Thermal Stability to Oxidation.
8.7(Tensile yield strength, Annex-J)	-	1350	-
8.7(Elongation at break, Annex-J)	-	1350	-
8.8(Resistance to Weathering, Annex-F)	-	9000	-
8.9(Squeeze off, Annex-G)	-	1300	-
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	-
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2200	-
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1125	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	5000	-
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	-
5.3(U.V.Stabilizer)	-	0	-

Complete

31 Dec, 2023

-
-

IS 14928 (2001)

Textiles - Composite synthetic fibre ropes - Specification

- View breakup
Rs.2538/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 14929 (2001)

Textiles - High strength polyolefins copolymer ropes - Specification

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE)	-	2000	NIL
5.2.1(Construction)	-	300	NIL
5.2.2(Construction)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 5.2.1
5.2.3(Construction)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 5.2.1
5.3(Structure)	-	300	NIL
5.4( Rope)	-	300	NIL
6.1, Table 1 /Table 2.( REQUIREMENTS:- Linear Density)	-	500	NIL
6.1, Table 1 /Table 2.( Breaking Strength, Min)	-	1100	NIL
6.2, Table 1 and Table 2( Mass of the Coil)	-	250	NIL
6.3( Length of Coil)	-	250	NIL
8.1 (a)( MARKING)	-	250	NIL
8.1 (b)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (c)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (d)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (e)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1

Complete

31 Dec, 2023

-
-

IS 15225 (2002)

Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications

- View breakup
Rs. 13575/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 15265 (2003)

Flexible pvc pipes or polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps - Specification

29475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 1(Internal Diameter)	-	250	-
5.2 Table 2(Length)	-	0	Test charges has already been taken in cl . no. 5.1
6.1 Table 3(Hydrostatic test atatmospheric condition)	-	1000	-
6.2 Table 4(Hydrostatic test at 55± 2°C)	-	1000	-
6.3(Pressure Impulse Test Annex B)	-	15000	-
6.4(Vaccum Test requirement Annex C)	-	2000	-
6.5(Reinforce Facture Test Requirement Annex D)	-	1000	-
6.6(Minimum Bend Radius Requirement- Annex E )	-	1000	-
6.7(Cold Bend Radius Requirement- Annex E )	-	2500	-
6.8(Loss in Mass on Heating- Annex F)	-	1925	-
6.9(Effect of Sunlight)	-	3500	-

Complete

31 Dec, 2023

-
-

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

26800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.3 (Length of Pipe)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4.1 (e3min=0.75e)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
7(Physical characteristics )	-	0	-
7.1(Appearance:- )	-	300	-
7.2(Colour )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 7.1.
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	-
8(MECHANICAL CHARACTERISTICS)	-	0	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	850	-
9.2 IS 14182(b) Solvent cement)	-	850	-
10(Performance requirements)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	0	THE TESTING CHARGES HAS TAKEN ALREADY IN CLAUSE NO. 10.1.1
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1000	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 10.2.2.
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-
15.4 (b)(Cold impact)	-	1100	-
9.1(PIPE ENDS)	-	250	-

Complete

31 Dec, 2023

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

- View breakup
Rs.7438/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 15450 (2004)

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

24900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8, Table-2(Dimension)	-	250.00	-
10.1(Density )	-	500.00	-
10.6(Apparent tensile strength of pipe)	-	1600.00	1100.00 (Apparent tensile strength of pipe) + 500.00 (specimen charges)
10.7(minimum burst pressure)	-	1000.00	-
Clause 10.3 table 3(Carbon black content)	-	925.00	-

Complete

31 Dec, 2023

-
-

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

14350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	5900	cl. no. 3.2/3.2.2/ Color / Presence of UV stablizer / MFR / Density
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	250	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	700	-
3.7(Confluence Line Strength)	-	1100	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1200	-
3.10.1(Suspension Test)	-	2200	-
3.10.2(Free-Fall Test)	-	0	The Test Charge has already been taken in the cl. no. 3.10.1

Complete

31 Dec, 2023

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

- View breakup
Rs.10500/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

- View breakup
Rs.4988/-, Rs.2063/- optional for material (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
Included w.e.f. 29.06.2017.

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

114075 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	300	-
Cl 7(Dimensions Of Pipes)	-	250	-
Cl 8(Visual Appearance)	-	300	-
Cl 9.1(Hydraulic Characteristics)	-	18400	-
Cl 9.2(Fusion Compatibility)	-	4800	-
Cl 9.3(Reversion Test )	-	1000	-
Cl 9.4 & Annex B(Impact Strength)	-	1400	-
Cl 9.5(Density)	-	500	-
Cl 9.6(Melt Flow Rate)	-	1100	-
Cl 9.7(Carbon Black Content & Dispersion)	-	1625	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825	-
Cl 9.9(Opacity)	-	575	-

Complete

31 Dec, 2023

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found