BIS - LIMS (Laboratory Information Management System)

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 [email protected]

Scope List

Reset

94 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

6025 View breakup
Rs.1444/-, Rs.3075/- PVC Resin (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	4100	VCM CONTENT RS. 3000/- + K-VALUE RS. 1100/-
4(Size of fitting)	-	250	NIL
5.1 Table-1 Fig.1(Dimension of Socket length)	-	250	NIL
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	NIL
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	NIL
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	NIL
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	NIL
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	NIL
8(Marking)	-	250	NIL

Complete

31 Dec, 2023

-
upto 600mm dia

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

10825 View breakup
Rs.8156/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shell)	-	1000	NIL
3.2(Harness)	-	375	NIL
3.3(Metal Parts)	-	1000	NIL
4.1(Sizes)	-	250	NIL
5.1(Shell)	-	0	Charge already taken in clause no. 3.1 (Combined charges)
5.2(Harness)	-	250	Charge already taken in clause no. 3.2 (Combined charges)
5.3(Chin Strap or Nape Strap)	-	500	Charge taken on construction
5.4(Lamp Bracket)	-	0	Charge already taken in clause no. 5.3 (Consider on construction)
5.5(Cable Clip)	-	0	Charge already taken in clause no. 5.3 (Consider on construction)
6.1(Workmanship & Finish)	-	300	NIL
7.1(Mass)	-	250	NIL
8.1(Shock Absorption Resistance)	-	2000	NIL
8.2(Penetration Resistance)	-	1000	NIL
8.3(Flamability Resistance)	-	750	NIL
8.4(Electrical Resistance)	-	1100	NIL
8.5(Water Absorption)	-	600	NIL
8.6(Heat Resistance)	-	700	NIL

Complete

31 Dec, 2023

-
Except Lamp Bracket and cable cliip testing

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

18625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	Nil
5.1.2(Film Form)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges with visual appearance)
5.1.3(Odour)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges with visual appearance)
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	Nil
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	Nil
5.1.6a(Carbon Black Content, Annex-A)	-	925	Nil
5.1.6b(Ash Content, Annex-A)	-	950	Nil
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	Nil
5.2.2(Tolerance on Thickness, Annex-A)	-	500	Thickness & Width combined charges
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	Test charges Rs. 1100/- plus specimen charges Rs. 250/- = Rs. 1350/- (25% discount in not applicable in specimen charges)
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	Nil
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	(25% discount in not applicable in Ageing charges)
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1350	Test charges Rs. 1100/- plus specimen charges Rs. 250/- = Rs. 1350/- (25% discount in not applicable in specimen charges)
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1100	Nil
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	Nil
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	Test charges Rs. 750/- plus specimen charges Rs. 250/- = Rs. 1000/- (25% discount in not applicable in specimen charges)
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	Nil
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	The charges applicable as per clause 7.1 Table-1
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Tear resistance , Annex B)	-	0	The charges applicable as per clause 7.1 Table-1
8.1, Table 3(Puncture resistance , Annex C)	-	1100	Nil
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	Nil
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Tear resistance , Annex B)	-	0	The charges applicable as per clause 7.1 Table-1
9.1, Table 4(Puncture resistance , Annex C)	-	0	The charges applicable as per clause 7.1 Table-1

Complete

31 Dec, 2023

-
-

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

21650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	0	NIL
5.1(Tensile Adhesion Strength )	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.1(Tensile Adhesion Strength)	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.2(Shear Adhesion Strength )	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.2(Shear Adhesion Strength)	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.2(Shear Adhesion Strength)	-	1350	TEST CHARGES RS. 1100/- + RS. 250 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.3(OpenTime)	-	1100	NIL
5.4(Adjustment Time)	-	1100	NIL
5.5(Slip (Required for Vertical Application Only))	-	1600	TEST CHARGES RS. 1100/- + RS. 500 SPECIMEN PREPARATION CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES)
5.6(Deformability (Required for VerticalApplication Only))	-	2700	TEST CHARGES RS. 2200/- + RS. 500 SPECIMEN PREPARATION CHARGES + RS. 8400/- CONDITIONING CHARGES (25 % DISCOUNT IS NOT APPLICABLE ON SPECIMEN CHARGES & CONDITIONING CHARGES)

Complete

31 Dec, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

G SECTOR, GOVINDPURA INDUSTRIAL AREA, J. K. ROAD, BHOPAL, BHOPAL, Bhopal, Madhya Pradesh, 462023

7869955244 [email protected]

Scope List