BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Office Laboratory (NROL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- [email protected]

Scope List

Reset

290 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 3652 (1995)

Crop protection equipment. - Foot sprayer - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
C-10 (MARKING)	-
C-1 (TYPES)	-
C-2 (DIMENSIONS)	-
C- 4.1 & 4.2 (END FITTINGS)	-
C-5.1 (GASKETS)	-
C- 6.1 to 6.3 (OPERATING TRIGGER/Knob)	-
C-7 (TESTS)	-
D-5 (MARKING)	-
D-1 (TYPES)	-
D-2 (MATERIAL)	-
D-3 (DIMENSIONS)	-
D-4 (OTHER REQUIREMENTS )	-
F-11 (MARKING)	-
F-1.1 (TYPES)	-
F-3 (PERFORMANCE REQUIREMENTS)	-
F-5 (DESIGNATION)	-
F-6 (WORKMANSHIP AND FINISH)	-
F-4 (OTHER REQUIREMENTS )	-

Complete

-
-

IS 3104 : Part 1 (1982)

Specification for density hydrometers: Part 1 requirements (First Revision)

- View breakup
Rs. 4800/- excluding accuracy test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.11.2 ( Stem diameter of the hydrometers shall be not less than 40 mm.)	-
Cl.10.1 workmanshisp and finish ( The outer surface of the hydrometers shall be symmetrical about the main axis)	-
Cl.10.2 ( There shall be no abrupt changes in their cross section ( see Fig, 1 ))	-
Cl.10.3 ( The cross-section of the stem shall remain unchanged for at least 5 mm below the lowest graduation line on ??? scale.)	-
Cl.10.4 (The stem shall extend unchanged in diameter at least 15 mm above the uppermost graduation line on the scale.)	-
Cl.10.5 ( The hydrometer shall float with its axis vertical to within 1.5° of arc.)	-
Cl.10.6 (There shall be no loose material in the instrument)	-
Cl.10.7 ( The strip on which the scale and inscriptions are marked shall remain securely fastened in place at the temperature of use ( see 9.3 ).)	-
Cl.10.8 ( The scale shall be straight and without twist.)	-
Cl.10.9 ( Appropriate means shall be incorporated for ensuring that any displacement of the scale or of the strip bearing the scale is readily apparent.)	-
Cl.11.1 ( The dimensions of the hydrometers shall conform to the requirements given in Table 1.)	-
Cl.12.2 Cl.12.2.1 Graduation Lines ( The graduation lines shall be distinct and of uniform thickness not exceeding 0 2 mm or one-fifth of the distance between the centres of adjacent lines, whichever is less. For the SP series, the thickness of the graduation lines shall not exceed 0.2 mm or one-sixth of the distance between the centres of adjacent lines, whichever is less.)	-
Cl.12.2.2 (There shall be no evident local irregularities in the spacing of the graduation lines.)	-
Cl.12.2.3 ( The graduation lines shall be perpendicular to the axis of the hydrometer.)	-
Cl.12.2.4 (The short, medium and long scale lines shall extend, respectively, at least one-fifth, one-third and one-half of the way round the circumference of the stem.)	-
Cl.12.2.5 ( The highest and lowest graduation lines indicating the nominal limits of the scale shall be long lines ( see 12.3.1, 12.3.2 and 12.3.3 ).)	-
Cl.12.5 Extension of Scale ( — The scale shall be extended beyond the nominal scale limits, as indicated in col 12 of Table 1.)	-

Partial

-
-

IS 5852 (2004)

Protective Steel Toe Caps for Footwear

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5/5.1- Fig. 1 and Fig. 2, Table 1. (REQUIREMENTS-Shape and Dimension)	-
5/5.3 (REQUIREMENTS-Finish)	-
5/5.1- Fig. 1 and Fig. 2, Table 1. (REQUIREMENTS-Shape and Dimension)	-
5/5.3 (REQUIREMENTS-Finish)	-
5/5.1- Fig. 1 and Fig. 2, Table 1. (REQUIREMENTS-Shape and Dimension)	-
5/5.3 (REQUIREMENTS-Finish)	-

Partial

-
-

IS 779 (1994)

Water meters (Domestic Type) - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13 (Marking)	-
4 (Nominal Size)	-
5 (Classes of Water meter)	-
7 (Construction)	-
7.2 (i) Body)	-
7.3 (Registration Box)	-
7.4 (Cap)	-
7.5 (Connections )	-
7.6 (Strainers)	-
7.7 (Impeller and pistons)	-
7.8 (Impeller, Chamber and Measuring Chamber )	-
7.9 (Gears & Pinions )	-
7.1 (Bearings)	-
7.11 (Counter)	-
7.12 (Dial)	-
7.13 (Regulator)	-
7.14 (Sealing)	-
7.15 (Frost protection device)	-
8.1 & 8.2 (Indicating device)	-
8.3 (Value of verification Scale division )	-
8.4 (Acceleration Device)	-
9.1, table 2 (i)Threads )	-
9.1, table 3 (ii)Thread Length ‘a’ )	-
9.1, table 4 ( ‘b’ )	-
9.1, table 5 (iii) Overall Length (with nipple))	-
9.1, table 6 (iv)Overall Width )	-
9.1, table 7 (v)Overall Height H1)	-
9.1, table 8 ( H2 )	-
10.1 (Pressure tightness)	-
10.2 (Loss of pressure)	-
11.1 (Metering Accuracy)	-
11.2 (Min. Starting flow)	-
10.3 (Temp. suitability )	-
10.1 (Pressure tightness)	-
10.2 (Loss of pressure)	-
11.1 (Metering Accuracy)	-
12.4.3 (Construction)	-
12.4.4 (Life test )	-
10.1 (Pressure tightness)	-
10.2 (Loss of pressure)	-
11.1 (Metering Accuracy)	-
11.2 (Min. Starting flow)	-
10.3 (Temp. suitability )	-
10.1 (Pressure tightness)	-
10.2 (Loss of pressure)	-
11.1 (Metering Accuracy)	-
12.4.2 (Construction)	-

Partial

-
-

IS 3906 (1995)

Crop Protection Equipment - Hand-operated Knapsack Sprayer, Piston Type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (Marking)	-
5.1 & 5.2 (a) Discharge rate ml/minute Min. )	-
5.1 & 5.2 (b) Volumetric efficiency 85% Min.)	-
6.1 (i) Capacity Liters )	-
6.3 (c) Straps )	-
6.1 (iii)The tank, when filled up to its neck level with water, shall not show any sign of leakage and shall not buckle)	-
6.2 (b)Skirt/Stand)	-
6.3 (c) Straps )	-
6.4 (d) Filling hole)	-
6.5 (e) Pressure chamber)	-
6.6 (f)Pump cylinder)	-
6.7 (g) Piston )	-
6.3,(As per 6.5 of IS 3652:95) (h) Threaded connection)	-
6.9 (i) Operating lever, handle and piston rod )	-
6.1 (j) Discharge outlet)	-
6.11 (k) Gaskets )	-
6.12 ( l) Delivery hose)	-
6.13 (m) cut off device and lance )	-
6.14 (n) Nozzle )	-
6.15 (o) Lifting arrangement)	-
6.16 (p) Mass )	-
6.17 (q) Endurance)	-
7.1 to7.3.5 (a) Manual)	-
Cl.8.1 and 8.2 (6. Workmanship & finish)	-
Cl.8.1 and 8.2 (Cut off device)	-

Complete

-
-

IS 14433 (2007)

Infant milk substitutes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Moisture)	-
6.1 (Milk protein)	-
6.1 (Milk fat)	-
6.1 (Total ash)	-
6.1 (Acid insoluble ash)	-
6.1 (Insolubility index)	-
6.4 (Scorched particles)	-

Partial

-
-

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1&3 (Marking)	-
3 (Class of Accuracy)	-
4.1 (Nominal capacities)	-
4.2 (Accuracy)	-
5.1 (Material)	-
5.2 (Pattern of Pipette)	-
5.3 (Workmanship & Finish)	-
5.4 (i) Distance of graduation line from top of pipette.)	-
5.4 (ii) Distance from graduation line to top of bulb(pattern 2))	-
5.4 (iii)Distance from graduation line to tip of jet (Pattern 1))	-
5.4 (iv) Wall thickness)	-
5.4 (v) Dia. of safety bulb (if provided ))	-
5.4 (vi)Distance from top of pipette to bottom of safety bulb )	-
5.4 (vii) Overall length, L)	-
5.4 (viii) Length of suction tube, L1 )	-
5.4 (ix) Length of delivery tube, L2 )	-
5.4 (x) Internal dia. of suction tube D1 )	-
5.4 (xi) External dia. of bulb D2 )	-
5.4 (xii) External dia. of delivery tube D3 )	-
5.5 (Delivery Time)	-
5.6&7 (Graduation line & Visibility )	-
5.1.1 (Limit of Alkalinity)	-

Partial

-
-

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 ( Copper Cooduetor)	-
3.2 (Aluminium conductor)	-
4.1 (INSULATION : lnsulation for General Service)	-
4.2 (INSULATION : Heat Resisting insulation)	-
4.3 (INSULATION : Silicone Rubber Insulation)	-
5.1 (TAPE : Proofed Tape)	-
5.2 (TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-
5.3 (TAPE : Giass Tape)	-
6.1 (FILLERS : )	-
7.1 (BRAID : Textile Braid)	-
7.2 (BRAID : Glass Braid )	-
8.1 (SHEATH : General Service Insulated Cables and Flexible Cords)	-
8.2 (SHEATH :Heat Resisting Insulated Cables)	-
9.1 (PresenRtive Compound)	-
9.2 (Varnish)	-
10 ( Conductor )	-
11 (Separator tape)	-
12.2 (Insulation : Thickness of Insufatien)	-
12.4 (Insulation : Allplication of Insulation)	-
13 (CORE IDENTiFICATlON)	-
14 (Tape)	-
15 (BRAIDING)	-
16 (COMPOUNDING AND VARNISHING)	-
17 (LAYING UP OF CORES)	-
18 ( Binder tape)	-
19.2 (Sheath : Thickness of Sheath)	-
19.4 ( Sheath :Colour)	-
20 ( Overall diameter)	-
21. (b) (Annealing Test (for coper))	-
21. (c) ( Tensile Test (for aluminium))	-
21. (d) ( Wrapping Test (for aluminium))	-
21. (e) (Conductor Resistance )	-
21.1 ( Tensile strength )	-
22.1 ( Elongation)	-
21.1 (type test : Ageing In air oven)	-
21.1 (type test : Ageing in air bomb)	-
21.1 (type test : Ageing In oxygen bomb)	-
21.1 (type test : Tear resistance )	-
22.2 (type test :Insulauon resistance High voltage (water immersron ) test)	-
22.2 (type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-
21 (Water absorption test)	-
23 (identification)	-

Partial

-
-

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Conductor : Material -IS : 8130-2013)	-
4.1 (Insulation : Material -IS : 5831-1984)	-
5.1 (Sheath : materail IS : 5831-1984)	-
6.1 (Conductor : Construction IS : 8130-2013)	-
7.1 (Insulation : Application )	-
7.2 (Thickness of Insulation - average )	-
7.2 (Thickness of Insulation - Min. )	-
7.3 (Colour of Insulation)	-
8.1 (Nominal radial thickness of sheath )	-
8.2 (Thickness of Sheath)	-
8.2 (Thickness of Sheath - min.)	-
8.3 (Colour of Sheath)	-
9.1 a) (Annealing test)	-
9.1 b) (Conductor resistance test)	-
9.1 d) i) (Insulation : Tensile strength)	-
9.1 d) i) (Insulation : elongation at break)	-
9.1 d) i) (Sheath : Tensile strength)	-
9.1 d) i) (Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation )	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break)	-
9.1 d) iii ) (Loss of mass test - insulation )	-
9.1 d) iii ) (Loss of mass test - Sheath )	-
9.1 d) iv ) (Hot deformation - insulation )	-
9.1 d) iv ) (Hot deformation - sheath )	-
9.1 d) v ) (Heat shock - insulation )	-
9.1 d) v ) (Heat shock - Sheath )	-
9.1 d) vi ) (Shrinkage - insulation )	-
9.1 d) vi ) (Shrinkage : Crack observed - insulation )	-
9.1 d) vi ) (Shrinkage - Sheath )	-
9.1 d) vi ) (Shrinkage: Crack observed - Sheath )	-
9.1 f) (Insulation resistance test: Volume resistivity )	-
9.1 f) (Insulation resistance test : IR constant)	-
10.4 (Flammability Test )	-
11.1 (Manufacturer’s Identification)	-
11.2 (Cable Code)	-
12.1 (packing )	-
12.2 (Marking )	-
12.2.1 (Standard marks )	-

Partial

-
-

100

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

- View breakup
Single core PVC Insulated Unsheathed: Rs. 11030/- Single core PVC Insulated Sheathed: 75 % additional for sheath. Multi core with PVC Sheath: 75% additional for each additional core. Round and flat tinned copper braids without further covering for earthing: Rs. 1115/- Above charges are excluding Material tests, Ageing in oxygen bomb, Capacitance test, Ozone resistance test, Effect of heat on flexibility, Effect of oils, Effect of lubricating oil, brake fluid, diesel and petrol, Effect of cooling on flexibility.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Insulation)	-
7.3 (Insulation)	-
8 (Core Identification)	-
9 (Laying up of cores)	-
10.1.1 (Sheathing )	-
10.2 (Sheathing )	-
3 & 6 (Conductor)	-
3 & 6 (Conductor)	-
3 & 6 (Conductor)	-
3 & 6 (Conductor)	-
3 & 6 (Conductor)	-
3 & 6 (Conductor)	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Dimensions & thickness )	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
4.2 & 12.1 (Physical tests for Insulation & Sheath)	-
14 (High Voltage Test)	-
22.1 (FLAMMABILITY TEST)	-
22.1 (FLAMMABILITY TEST)	-
23.1 (Manufacturer's Identification)	-
23.1 (Manufacturer's Identification)	-
24.1 (PACKING AND MARKING)	-
24.2 (PACKING AND MARKING)	-
24.2.1 (PACKING AND MARKING)	-

Partial

-
-

101

IS 4159 (2002)

Mineral filled sheathed heating elements - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.7 of IS 4159:2002 & IS 302-1:2008 (Marking )	-
Cl.8 of IS 4159:2002 & IS 302‐1:2008 (Protection Against Electric Shock)	-
Cl.10 of IS 4159:2002 & IS 302-1:2008 (Input & Current)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.11 of IS 4159:2002 & IS 302‐1:2008 (Temperature Rise)	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008 (Electrical Insulation and Leakage Current at Operating Temperature)	-
Cl.13 of IS 4159:2002 & IS 302-1: 2008 (Electrical Insulation and Leakage Current at Operating Temperature)	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance)	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance)	-
Cl.15 of IS 4159:2002 & IS 302-1: 2008 (Moisture Resistance)	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008 (Insulation Resistance & Electric Strength (after Humidity Treatment))	-
Cl.16 of IS 4159:2002 & IS 302-1: 2008 (Insulation Resistance & Electric Strength (after Humidity Treatment))	-
Cl.18 of IS 4159:2002 (Endurance Test )	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.20 of IS 4159:2002 & IS 302-1: 2008 (Stability & Mechanical Hazards )	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008 (Mechanical Strength)	-
Cl.21 of IS 4159:2002 & IS 302-1: 2008 (Mechanical Strength)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.19 of IS 4159:2002 & IS 302-1: 2008 (Abnormal Operation)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.22 of IS 4159:2002 & IS 302-1: 2008 (Construction)	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.23 of IS 4159:2002 & IS 302-1: 2008 (Internal Wiring )	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008 (Component )	-
Cl.24 of IS 4159:2002 & IS 302-1: 2008 (Component )	-
Cl.25 of IS 4159:2002 & IS 302-1: 2008 (Supply connection & external flexible cables & cords)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.26 of IS 4159:2002 & IS 302-1: 2008 (Terminals for External Conductors)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.27 of IS 4159:2002 & IS 302-1: 2008 (Provision for Earthing)	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl.28 of IS 4159:2002 & IS 302-1: 2008 (Screws & Connection )	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008 (Creepage Distances & Clearances)	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008 (Creepage Distances & Clearances)	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008 (Resistance to Heat, Fire and Tracking)	-
Cl. 30 of IS 4159:2002 & IS 302-1: 2008 (Resistance to Heat, Fire and Tracking)	-
Cl. 31 of IS 4159:2002 & IS 302-1: 2008 (Resistance to Rusting)	-
Cl. 33.1 of IS 4159:2002 (Finish Test )	-
Cl. 29 of IS 4159:2002 & IS 302-1: 2008 (Creepage Distances & Clearances)	-

Complete

-
-

102

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 302-2-35:2017 (Classification)	-
Cl.6 of IS 302-2-35:2017 (Classification)	-
Cl.8 of IS 302-2-35:2017 (Protection Against Access To Live Parts)	-
Cl.10 of IS 302-2- 35:2011 (Power Input & Current )	-
Cl.11 of 302-2-35:2017 (Heating)	-
Cl.11 of 302-2-35:2017 (Heating)	-
Cl.11 of 302-2-35:2017 (Heating)	-
Cl.11 of 302-2-35:2017 (Heating)	-
Cl.13 of IS 302-2-35:2017 (Leakage Current & Electrical Strength at Operating Temperature )	-
Cl.13 of IS 302-2-35:2017 (Leakage Current & Electrical Strength at Operating Temperature )	-
Cl.15 of IS 302-2-35-2011 (Moisture Resistance )	-
Cl.15 of IS 302-2-35-2011 (Moisture Resistance )	-
Cl.16 of IS 302-2-35:2011 (Leakage Current and Electric Strength)	-
Cl.16 of IS 302-2-35:2011 (Leakage Current and Electric Strength)	-
Cl.19 of IS 302-2-35:2017 (Abnormal Operation)	-
Cl.19 of IS 302-2-35:2017 (Abnormal Operation)	-
Cl.19 of IS 302-2-35:2017 (Abnormal Operation)	-
Cl.19 of IS 302-2-35:2017 (Abnormal Operation)	-
Cl.20 of IS 302-2-35-2011 (Stability & Mechanical Hazards )	-
Cl.21.1 of IS 302-2-35-2011 (Mechanical strength)	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.22 of IS 302-2-35-2011 (Construction )	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.23 of IS 302-2-35-2011 (Internal Wiring)	-
Cl.24 of IS 302-2-35:2017 (Component )	-
Cl.24 of IS 302-2-35:2017 (Component )	-
Cl.24 of IS 302-2-35:2017 (Component )	-
Cl.24 of IS 302-2-35:2017 (Component )	-
Cl.24 of IS 302-2-35:2017 (Component )	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.25 of IS 302-2-35:2017 (Supply Connection & External Flexible Cords)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.26 of IS 302-2-35:2017 (Terminals for External Conductors)	-
Cl.27 of IS 302-2-35:2017 (Provision for Earthing)	-
Cl.27 of IS 302-2-35:2017 (Provision for Earthing)	-
Cl.27 of IS 302-2-35:2017 (Provision for Earthing)	-
Cl.27 of IS 302-2-35:2017 (Provision for Earthing)	-
Cl.27 of IS 302-2-35:2017 (Provision for Earthing)	-
Cl.27 of IS 302-2-35:2017 (Provision for Earthing)	-
Cl.27 of IS 302-2-35:2017 (Provision for Earthing)	-
Cl.28 of IS 302-2-35:2017 (Screws and Connections )	-
Cl.29 of IS 302-2-35:2017 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.29 of IS 302-2-35:2017 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.29 of IS 302-2-35:2017 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.30 of IS 302-2-35: 2011 (Resistance to Heat and Fire)	-
Cl.30 of IS 302-2-35: 2011 (Resistance to Heat and Fire)	-
Cl.31 of IS 302-2-35: 2011 (Resistance to Rusting )	-
Cl.32 of IS 302-2-35: 2011 (Radiation, Toxicity and Similar Hazards )	-
Cl.10 of IS 8978 : 1992 (Finish)	-
Cl.11 of IS 8978 : 1992 (Operation of flow switch)	-
Cl.12 of IS 8978 : 1992 (Endurance)	-

Complete

-
-

103

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.2 (Marking)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.4 (Marking)	-
7.5 (Marking)	-
7.6 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
9 (Starting, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.2 (Moisture Resistance-Spillage test)	-
15 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
11 (Heating, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
11 (Heating, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
19 (Abnormal Operation, IS 302-1)	-
20 (Stability & Mechanical Hazards, IS 302-1)	-
20 (Stability & Mechanical Hazards, IS 302-1)	-
21 (Mechanical Strength, IS 302-1)	-
20 (Stability & Mechanical Hazards, IS 302-1)	-
21 (Mechanical Strength, IS 302-1)	-
21 (Mechanical Strength, IS 302-1)	-
22.1 (Construction, IS 302-1)	-
22.2 (Construction)	-
22.3 (Construction)	-
22.4 (Construction)	-
22.5 (Construction)	-
24.6 (Components)	-
24.7 (Components)	-
22.9 (Construction)	-
22.1 (Construction)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components)	-
24.4 (Components)	-
24.5 (Components)	-
24.6 (Components)	-
24.7 (Components)	-
24.8 (Components)	-
24.9 (Components)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
23 (Internal Wiring, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
25 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29 (Clearances and Distances through Insulation, IS 302-1)	-
29 (Clearances and Distances through Insulation, IS 302-1)	-
30 (Resistance to Heat, Fire, Tracking, IS 302-1)	-
30 (Resistance to Heat, Fire, Tracking, IS 302-1)	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.4 (IDLI batter-Grinding of black gram)	-
34.4 (IDLI batter-Grinding of rice)	-
34.2 (Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-
34.4 (IDLI batter-Grinding of rice)	-
34.5.1 (a) (Operational test for juicers )	-
34.5.1 (b) (Operational test for juicers )	-
34.5.2 (Operational test for juicers )	-
35 (Temperature withstand test for bowl)	-
36 (Test for controls )	-
37 (Strength of Assembly )	-
37 (Strength of Assembly )	-

Partial

-
-

104

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 302-2-30:2007 (Classification)	-
Cl.6 of IS 302-2-30:2007 (Classification)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008 (Power Input and Current)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008 (Marking and Instructions)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength at operating temp)	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength at operating temp)	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008 (Moisture Resistance)	-
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008 (Moisture Resistance)	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008 (Heating)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008 (Abnormal Operation)	-
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008 (Stability & Mechanical Hazards)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008 (Mechanical Strength)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008 (Construction)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008 (Internal Wiring)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008 (Component)	-

Complete

-
-

105

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 302-‐2-‐201:2008 (Classification)	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.8 of IS 302‐2-201: 2008 (Protection Against Access to Live Parts)	-
Cl.10 of IS 302‐2‐201:2008 (Power Input and Current )	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.13 of IS 302-2-201: 2008 (Leakage Current & Electric Strength at Operating Temperature)	-
Cl.13 of IS 302-2-201: 2009 (Leakage Current & Electric Strength at Operating Temperature)	-
Cl.15 of IS 302-2-201:2008 (Moisture Resistance )	-
Cl.15 of IS 302-2-201:2008 (Moisture Resistance )	-
Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength)	-
Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength)	-
Cl.18 of IS 368:2014 (Endurance)	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.20 of IS 302-2-201: 2008 (Stability & Mechanical Hazards)	-
Cl.21 of IS 302-2-201: 2008 (Mechanical Strength )	-
Cl.21 of IS 302-2-201: 2008 (Mechanical Strength )	-
Cl.22 of IS 302-2-201: 2008 (Construction)	-
Cl.22 of IS 302-2-201: 2008 (Construction)	-
Cl.22 of IS 302-2-201: 2008 (Construction)	-
Cl.22 of IS 302-2-201: 2008 (Construction)	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.26 of IS 302-2-201: 2008 (Terminals for External Conductors)	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.28 of IS 302-2-201: 2008 (Screws & Connections )	-
Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation )	-
Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation )	-
Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire )	-
Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire )	-
Cl.31 of IS 302-2-201:2008 (Resistance of Rusting )	-
Cl.32 of IS 302-2-201:2008 (Radiation, Toxicity and Similar Hazards)	-

Complete

-
-

106

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.3 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19.2 (Abnormal Operation, IS 302-1)	-
19.2 (Abnormal Operation, IS 302-1)	-
19.3 (Abnormal Operation, IS 302-1)	-
19.3 (Abnormal Operation, IS 302-1)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1 & IS 302-2-202)	-
22 (Construction, IS 302-1)	-
22.101 (Construction)	-
22.102 (Construction)	-
22.103 (Construction)	-
22.104 (Construction)	-
22.105 (Construction)	-
22.105.1 (Construction)	-
22.105.2 (Construction)	-
22.106 (Construction)	-
22.107 (Construction)	-
11.107.1 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.101 (Components)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.4 (Supply Connection and External Flexible Cords)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
26.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
30.2 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-

Partial

-
-

107

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

- View breakup
up to 3 kW

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 of IS 302-‐2-‐201:2008 (Classification)	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.7 of IS 302-2-201:2008 (Marking and Instruction )	-
Cl.8 of IS 302‐2-201: 2008 (Protection Against Access to Live Parts)	-
Cl.10 of IS 302‐2‐201:2008 (Power Input and Current )	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.11 of IS 302-2201: 2008 (Heating)	-
Cl.13 of IS 302-2-201: 2008 (Leakage Current & Electric Strength at Operating Temperature)	-
Cl.15 of IS 302-2-201:2008 (Moisture Resistance )	-
Cl.15 of IS 302-2-201:2008 (Moisture Resistance )	-
Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength)	-
Cl.16 of IS 302-2-201:2008 (Leakage Current & Electric Strength)	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.19 of IS 302‐2-201: 2008 (Abnormal Operation )	-
Cl.20 of IS 302-2-201: 2008 (Stability & Mechanical Hazards)	-
Cl.21 of IS 302-2-201: 2008 (Mechanical Strength )	-
Cl.21 of IS 302-2-201: 2008 (Mechanical Strength )	-
Cl.21 of IS 302-2-201: 2008 (Mechanical Strength )	-
Cl.22 of IS 302-2-201: 2008 (Construction)	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.23 of 302-2-201:2008 (Internal Wiring )	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.24 of IS 302-2-201: 2008 (Component)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.25 of IS 302-2-201: 2008 (Supply Connection and External Flexible Cords)	-
Cl.26 of IS 302-2-201: 2008 (Terminals for External Conductors)	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.27 of IS 302-2-201: 2008 (Provision for Earthing )	-
Cl.28 of IS 302-2-201: 2008 (Screws & Connections )	-
Cl.29 of IS 302-2‐201:2008 (Clearances, Creepage Distances and Solid Insulation )	-
Cl.30 of IS 302-2‐201:2008 (Resistance to Heat and Fire )	-
Cl.31 of IS 302-2-201:2008 (Resistance of Rusting )	-
Cl.32 of IS 302-2-201:2008 (Radiation, Toxicity and Similar Hazards)	-

Complete

-
-

108

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6 (Classification)	-
Cl.6 (Classification)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.4 (Marking and Instructions)	-
Cl.7.5 (Marking and Instructions)	-
Cl.7.6 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.8 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.9 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.10 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.11 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2009 (Marking and Instructions)	-
Cl.7.13 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.14 of IS302-1:2008 (Marking and Instructions)	-
Cl.7.14 (Marking and Instructions)	-
Cl.7.14 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.8 & IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10 & IS:302-1:2008 (Power Input and Current)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11 & IS:302-1:2008 (Heating)	-
Cl.11.8 (Heating)	-
Cl.11.8 (Heating)	-
Cl.11.8 (Heating)	-
Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. )	-
Cl.13 & IS:302-1:2008 (Leakage Current & Electric Strength at operating temp. )	-
Cl.15 & IS: 302-1:2008 (Moisture Resistance )	-
Cl.15.3 of IS 302-1:200 (Moisture Resistance )	-
Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.16 & IS:302-1:2008 (Leakage Current & Electric Strength )	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 & IS:302-1:2008 (Abnormal Operation.)	-
Cl.19.101 (Abnormal Operation.)	-
Cl.19.102 (Abnormal Operation.)	-
Cl.19.103 (Abnormal Operation.)	-
Cl.19.104 (Abnormal Operation.)	-
Cl.19.105 (Abnormal Operation.)	-
Cl.19.106 (Abnormal Operation.)	-
Table 8 of IS 302-1:2008 (Abnormal Operation.)	-
Cl.19.107 (Abnormal Operation.)	-
Cl.19.108 (Abnormal Operation.)	-
Cl.19.109 (Abnormal Operation.)	-
Cl.19.110 (Abnormal Operation.)	-
Cl.19.111 (Abnormal Operation.)	-
Cl.19.112 (Abnormal Operation.)	-
Cl.19.113 (Abnormal Operation.)	-
Cl.19.114 (Abnormal Operation.)	-
Cl.20 & IS:302-1:2008 (Stability & Mechanical Hazards)	-
Cl.21 & IS:302-1:2008) (Mechanical Strength.)	-
Cl.21.2 of IS 302-1:2008 (Mechanical Strength.)	-
Cl.21.101 (Mechanical Strength.)	-
Cl.21.102 (Mechanical Strength.)	-
Cl.21.103 (Mechanical Strength.)	-
Cl.22.1 of IS 302-1:2008 (Construction)	-
Cl.22.5 of IS 302-1:2008 (Construction)	-
Cl.22.6 of IS 302-1:2008 (Construction)	-
Cl.22.7 of IS 302-1:2008 (Construction)	-
Cl.22.8 of IS 302-1:2008 (Construction)	-
Cl.22.9 of IS 302-1:2008 (Construction)	-
Cl.22.11 (Construction)	-
Cl.22.12 of IS 302-1:2008 (Construction)	-
Cl.22.13 of IS 302-1:2008 (Construction)	-
Cl.22.15 of IS 302-1:2008 (Construction)	-
Cl.22.18 of IS 302-1:2008 (Construction)	-
Cl.22.20 of IS 302-1:2008 (Construction)	-
Cl.22.21 of IS 302-1:2008 (Construction)	-
Cl.23 & IS:302-1:2008 (Internal Wiring )	-
Cl.23.4 & Cl.29 of 302-1:2008 (Internal Wiring )	-
Cl.23.5 of 302-1:2008 (Internal Wiring )	-
Cl.23.7 of 302-1:2008 (Internal Wiring )	-
C.23.7 of 302-1:2008 (Internal Wiring )	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
C.24.2 of 302-1:2008 (Component)	-
Cl.24.10 (Component)	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1 of 302-1:2008 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
Cl.24.1.3 (Component)	-
C.24.2 of 302-1:2008 (Component)	-
Cl.24.10 (Component)	-
Cl.25.1 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.2 of IS 3021:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.3 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.4 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.5 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.6 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.7. (Supply Connection and External Flexible Cords )	-
Cl.25.8 (Supply Connection and External Flexible Cords )	-
Cl. 25.9 (Supply Connection and External Flexible Cords )	-
Cl.25.10 of 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl. 25.11 (Supply Connection and External Flexible Cords )	-
Cl. 25.12 (Supply Connection and External Flexible Cords )	-
Cl. 25.13 (Supply Connection and External Flexible Cords )	-
Cl.7.101 (Marking and Instructions)	-
Cl.25.14 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.15 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.17 of IS 302-1:2008 (Supply Connection and External Flexible Cords )	-
Cl.25.18 (Supply Connection and External Flexible Cords )	-
Cl.25.20 (Supply Connection and External Flexible Cords )	-
Cl.26.1 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.26.10 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.26.11 of IS 302-1:2008 (Terminal for External Conductors )	-
Cl.27.1 of 302-1:2008 (Provision for Earthing.)	-
Cl.27.5 of 302-1:2008 (Provision for Earthing.)	-
Cl.28 of 302-1:2008 (Screws and Connections.)	-
Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.29 & IS:302-1:2008 (Clearances, Creepage Distances and Solid Insulation)	-
Cl.30 & IS:302-1:2008 (Resistance to Heat and Fire)	-
Cl.30.2.2 of 302-1:2008 (Resistance to Heat and Fire)	-
Cl.31 & IS:302-1:2008 (Resistance to Rusting.)	-
Cl.32 & IS:302-1:2008 (Radition,Toxicity and similar Hazards.)	-

Complete

-
-

109

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19.7 (Abnormal Operation, IS 302-1)	-
19.8 (Abnormal Operation, IS 302-1)	-
19.9 (Abnormal Operation, IS 302-1)	-
19.1 (Abnormal Operation, IS 302-1)	-
19.101 (Abnormal Operation)	-
19.102 (Abnormal Operation)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
20.101 (Stability & Mechanical Hazards)	-
20.102 (Stability & Mechanical Hazards)	-
20.103 (Stability & Mechanical Hazards)	-
20.104 (Stability & Mechanical Hazards)	-
20.105 (Stability & Mechanical Hazards)	-
20.106 (Stability & Mechanical Hazards)	-
20.107 (Stability & Mechanical Hazards)	-
20.108 (Stability & Mechanical Hazards)	-
20.109 (Stability & Mechanical Hazards)	-
20.110 (Stability & Mechanical Hazards)	-
20.111 (Stability & Mechanical Hazards)	-
20.112 (Stability & Mechanical Hazards)	-
20.113 (Stability & Mechanical Hazards)	-
20.114 (Stability & Mechanical Hazards)	-
20.115 (Stability & Mechanical Hazards)	-
20.116 (Stability & Mechanical Hazards)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
22.1 (Construction, IS 302-1)	-
22.101 (Construction)	-
22.102 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.5 (Components, IS 302-1)	-
24.6 (Components, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
26.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat and Fire, IS 302-1)	-
30.2 (Resistance to Heat and Fire, IS 302-1 disable)	-
31 (Resistance of Rusting, IS 302-1)	-
32 (Radiation, Toxicity and similar Hazard IS 302-1)	-

Complete

-
-

110

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance, IS 302-1)	-
15.3 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.5 (Abnormal Operation, IS 302-1)	-
19.5 (Abnormal Operation, IS 302-1)	-
19.7 (Abnormal Operation)	-
19.9 (Abnormal Operation)	-
19.1 (Abnormal Operation)	-
19.101 (Abnormal Operation)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
21.101 (Mechanical Strength, IS 302-2-3)	-
22.1 (Construction, IS 302-1)	-
22.101 (Construction)	-
22.102 (Construction)	-
22.103 (Construction)	-
22.104 (Construction)	-
22.105 (Construction)	-
22.106 (Construction)	-
22.107 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.4 (Components, IS 302-1)	-
24.5 (Components, IS 302-1)	-
24.6 (Components, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
30.2 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-
32 (Radiation, Toxicity and similar Hazard IS 302-1)	-

Complete

-
-

111

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Fineness 4031 Part 2)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-

Partial

-
-

112

IS 8042 (2015)

White portland cement - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 -Table 2- i (Fineness 4031 Part 2)	-
6 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
6 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
6 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
6-Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
6 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
6 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5 - Table - 1 vi (Loss on ignition - Cl 4.2 of IS 4032:1985)	-
5 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985)	-
5 - Table - 1 ii (Iron oxide - Cl 4.5 of IS 4032:1985)	-
5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-

Partial

-
-

113

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Cistern)	-
Cl 5.2 (Cover)	-
Cl 5.3 (Flush pipe)	-
Cl 5.3.1 (Flush pipe connection to cistern.)	-
Cl 5.4 (Inlet and overflow holes)	-
Cl 5.6 (Operating mechanism / lever)	-
Cl 5.8 (Overflow pipe)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (CARBON)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (SULPHUR)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (MANGANESE)	-
4 ,Table- 1, S.No 2 AND AS PER IS 1239-1 (PHOSPHORUS)	-

Partial

-
-

114

IS 14542 (1998)

Partly skimmed milk powder specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1(i) (Moisture Type I (IS 11623))	-
Table 1(i) (Moisture Type II (IS 11623))	-
Table 1(ii) (Total solids (milk solids and added salts) Type I (IS 11623))	-
Table 1(ii) (Total solids (milk solids and added salts) Type II (IS 11623))	-
Table 1(iii) (Milk fat, Type I (IS I1722))	-
Table 1(iii) (Milk fat, Type II (IS I1722))	-
Table 1(iv) (Insolubility index, a) Roller dried Type I (IS 12759))	-
Table 1(iv) (Insolubility index, a) Roller dried Type II (IS 12759))	-
Table 1(iv) (Insolubility index, b) Spray dried Type I (IS 12759))	-
Table 1(iv) (Insolubility index, b) Spray dried Type II (IS 12759))	-
Table 1(v) (Total ash Type I (Annex B of IS 14433 - Part 1))	-
Table 1(v) (Total ash Type II (Annex B of IS 14433 - Part 1))	-
Table 1(vi) (Titratable acidity (as lactic acid) Type I (IS 11766))	-
Table 1(vi) (Titratable acidity (as lactic acid) Type II (IS 11766))	-
Cl 6.6.1 (Bacterial Count (IS 5402))	-
Cl 6.6.2 (Coliform Count ((IS 5402))	-

Complete

-
-

115

IS 9762 (1994)

Specification for polyethylene floats (Spherical) for float valves

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

116

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Classification Heavy/Medium/L:ight)	-
4 (Material)	-
0.5 (Fabrication)	-
5.1 (The utensil shall be pressed or spun from one piece)	-
5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-
5.2 (Lid Thickness of the finished utensil, mm)	-
6.1 & Table 1 ( i) Name of Utensil )	-
6.1 & Table 1 (ii) Shape of Utensil)	-
6.1 & Table 1 ( Nominal Size, mm)	-
6.1 & Table 1 (Inside dia, Φ D mm Not declared )	-
6.1 & Table 1 (Outside dia Ф NA)	-
6.1 & Table 1 (Height NA)	-
6.1 & Table 1 (Capacity, l NA)	-
6.1 ( Minimum sheet thickness for nominal size )	-
7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-
7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-
8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-
8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-
8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-
8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-
9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-
10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-

Partial

-
-

117

IS 8794 (1988)

Specification for cast iron detachable joints for use with asbestos cement pressure pipes (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 2 (External Dia of AC Pipe(D2))	-
6.1, Table 2 (Inside diaFlange(DI))	-
6.1, Table 2 (External Dia at Centre(DEC))	-
6.1, Table 2 (Thickness(t))	-
6.1, Table 3 (Nominal Dia of Bolt(do))	-
6.1, Table 3 (Minimum prefared length of bolt(L))	-
6.1, Table 4 (Mass of joints)	-
8.4 (Coating)	-

Partial

-
-

118

IS 6595 : Part 2 (1993)

Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply) - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.5 (Guarantee of Workmanship and Material)	-
10.1 (Pump test, tolerances, and verification of guarantee on Pump Performance)	-

Complete

-
-

119

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (i) (Apendix B) (Total milk solids - Partly Skimmed Condenied Milk)	-
Table 1 (ii) (IS : 11762- 1986) (Fat -Condensed Milk)	-
Table 1 (iii) (Apendix C) (Sucrose -Condensed Milk)	-
Table 1 (vi) (Apendix D) (Titratable acidity (as lactic acid) -Condensed Milk)	-
Table 1 (v) (Apendix E) (Accelerated starage test -Condensed Milk)	-
Cl.5.1.10.1 (Salmonella IS 5887 Part 3)	-
Cl.5.1.10.1 (Shigella IS 5887 Part 7)	-
Cl.5.1.10.2 (Coliform Count IS 5401 Part 1)	-
Cl.5.1.10.3 (Yeast and Mould Count IS 5403)	-
Cl.5.1.10.4 (Coagulase positive Staphylococcus aureus IS 5887 Part 2)	-
Cl.5.1.10.5 (Escherichia coli IS 5887 Part 1)	-

Partial

-
-

120

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification )	-
6 (Classification )	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
(Cl.8 of IS 302-2-21:2011) (Protection Against Access to Live Parts)	-
(Cl.10 of IS 302-2-21: 2011) (Power Input & Current)	-
(Cl.11 of 302-2-21:2011) (Heating)	-
(Cl.11 of 302-2-21:2011) (Heating)	-
(Cl.13 of IS 302-2-21:2011) (Leakage Current )	-
(Cl.15 of IS 302-2-21-2011) (Moisture Resistance)	-
(Cl.15 of IS 302-2-21-2011) (Moisture Resistance)	-
(Cl.15 of IS 302-2-21-2011) (Moisture Resistance)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.20 of IS 302-2-21:2011) (Stability & Mechanical Hazards)	-
(Cl.21ofIS302-2-21:2011) (Mechanical strength)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.28 of IS 302-2-21:2011) (Screws & Connections)	-
(Cl.29ofIS302-2-21:2011) (Clearances, Creepage Distances and Solid Insulation)	-
(Cl.30 of IS 302-2-21:2011) (Resistance to Heat & Fire)	-
(Cl.30 of IS 302-2-21:2011) (Resistance to Heat & Fire)	-
(Cl.31 of IS 302-2-21:2011) (Resistance to Rusting)	-
(Cl.15 of IS 2082:2018) (Verification of the Rated Capacity)	-
(Cl.16 of IS 2082:2018) (Standing Loss per 24 Hours)	-
(Cl.17 of IS 2082:2018) (Hot Water Output)	-
(Cl.18 of IS 2082:2018) ( Reheating Time)	-
(Cl.19 of IS 2082:2018) (Mixing Factor)	-
(Cl.20 of IS 2082:2018) (Deviation of Dial Calibration)	-
(Cl.21 of IS 2082:2018) (Cyclic Temperature Variation)	-
(Cl.22 of IS 2082:2018) (Finish)	-

Complete

-
-

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Office Laboratory (NROL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- [email protected]

Scope List

No Record Found