BIS - LIMS (Laboratory Information Management System)

BIS, Northern Regional Office Laboratory (NROL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- [email protected]

Scope List

Reset

290 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7.3, Annex G (Average Breaking Load)	-
Clause 7.3, Annex G (Individual Breaking Load)	-
Clause 7.3, Annex F (Average Failure Load per unit Length)	-
Clause 7.3, Annex F (Individual Failure Load per unit Length)	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b) (Average Flexural strength )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a) (Indivdual Flexural strength )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b) (Average Tensile splitting strength )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a) (Indivdual Tensile splitting strength )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii) (Wet Abrasion resistance (Average of three test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i) ( Indivdual Wet Abrasion Resistance )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii) (Dry Abrasion resistance (Average of three test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i) ( Indivdual Dry Abrasion Resistance )	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b) (Compressive strength (Average of eight test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a) ( Indivdual Compressive strength)	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b) (Water absorption (Average of three test specimens))	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a) ( Indivdual Water absorption)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix) (Deviation from squareness)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii) (Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii) (Indivdual Plan Area (Asp))	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi) (Indivdual Thickness of wearing Layer)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi) (Thickness of wearing Layer)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Indivdual Arris/chamfer, Depth)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Arris/chamfer, Depth)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Indivdual Arris/chamfer, Width)	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v) (Arris/chamfer, Width)	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Average Width -Higher)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Individual Width - Higher)	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-
Clause 7.1.3 (Colour and Texture)	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-
Clause 7.1.1 (General Quality)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Individual Width - Lower)	-
7.2- TABLE-2- (i) IS-15658 (Annex-B) (Average Width -Lower)	-
Clause 3.20 (Spacer nibs)	-

Partial

-
-

IS 1061 (2017)

Disinfectant fluids, phenolic type - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Composition and Description)	-
4.6 (Detection of Phenolic Compounds)	-
4.2 (Stability after Dilution)	-
4.4 (Mercury Compounds)	-
4.5 (Stability on Storage)	-
4.3/3.2 (Germicidal Value)	-
4.3/3.3 (Germicidal Value)	-
3.1 (Chem) (Class)	-
3.2 (Chem) (Grade)	-
3.3 (Chem) (Type)	-
4.1.1 (chem) (Composition and Description)	-
4.1.2 (Chem) (Composition and Description)	-
4.2 (Chem) (Stability after Dilution)	-
4.3/3.2 (Chem) (Germicidal Value)	-
4.3/3.3 (Chem) (Germicidal Value)	-
4.3/3.4 (Chem) (Germicidal Value)	-
4.3/3.5 (Chem) (Germicidal Value)	-
4.3/3.5 (Chem) (Germicidal Value)	-
4.3/3.5 (Chem) (Germicidal Value)	-
4.4 (Chem) (Mercury Compounds)	-
4.5 (Chem) (Stability on Storage)	-
4.6 (Chem) (Detection of Phenolic Compounds)	-

Partial

-
-

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no 6.1 (Description)	-

Partial

-
-

IS 5487 (1992)

Metal polish, liquid - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

IS 4072 (1975)

Specification for steel for spring washers (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1, 5.1, 5.2 Table 1 (Carbon)	-
Cl. 2.1, 5.1, 5.2 Table 1 (Silicon)	-
Cl. 2.1, 5.1, 5.2 Table 1 (Manganese)	-
Cl. 2.1, 5.1, 5.2 Table 1 (Sulphur)	-
Cl. 2.1, 5.1, 5.2 Table 1 (Phosphorous)	-
Cl. 2.1, 5.1, 5.2 Table 1 (Chromium)	-
Cl. 2.1, 5.1, 5.2 Table 1 (Vanadium)	-

Partial

-
-

IS 3885 : Part 1 (1992)

Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 Table 1 (Carbon)	-
Cl. 6.1 Table 1 (Silicon)	-
Cl. 6.1 Table 1 (Manganese)	-
Cl. 6.1 Table 1 (Sulphur)	-
Cl. 6.1 Table 1 (Phosphorous)	-

Partial

-
-

IS 3748 (1990)

Tool and die steels - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 7.1, 7.2, 12.1 Table 1 (Carbon)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Silicon)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Manganese)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Nickel)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Chromium)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Molybdenum)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Vanadium)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Tungsten)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Sulphur)	-
Cl. 7.1, 7.2, 12.1 Table 1 (Phosphorous)	-
Cl. 7.2, (Copper)	-
Cl. 7.2, (Cobalt)	-
Cl. 7.2, (Tin)	-

Partial

-
-

IS 3298 (1981)

Specification for mild steel rivet bars for ship building (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, 5.2, 5.3, 5.4 (carbon)	-
Cl. 5.1, 5.2, 5.3, 5.4 (Sulphur)	-
Cl. 5.1, 5.2, 5.3, 5.4 (Phosphorous)	-
Cl. 5.1, 5.2, 5.3, 5.4 (Copper)	-
Cl. 5.1, 5.2, 5.3, 5.4 (Silicon)	-

Partial

-
-

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1, Table no 1 (carbon)	-
Cl. 6.1, Table no 1 (Manganese)	-
Cl. 6.1, Table no 1 (Silicon)	-
Cl. 6.1, Table no 1 (Sulphur)	-
Cl. 6.1, Table no 1 (Phosphorous)	-
Cl. 6.1, Table no 1 (aluminium)	-
Cl. 6.1, Table no 1 (Carbon +( Manganese / 6))	-

Partial

-
-

IS 279 (1981)

Specification for galvanized steel wire for telegraph and telephone purposes (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 Table 1 (Carbon )	-
Cl. 6.1 Table 1 (Manganese)	-
Cl. 6.1 Table 1 (Sulphur)	-
Cl. 6.1 Table 1 (Phosphorous)	-
Cl. 6.1 Table 1 (Silicon)	-
Cl. 6.1 Table 1 (Aluminium)	-
Cl. 6.1 Table 1 (Copper)	-

Partial

-
-

IS 2589 (1975)

Specificaiton for hard drawn steel wire for upholstery springs (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.1 Table 1 (carbon)	-
Cl. 4.1 Table 1 (Silicon)	-
Cl. 4.1 Table 1 (Manganese)	-
Cl. 4.1 Table 1 (Sulphur)	-
Cl. 4.1 Table 1 (Phosphorous)	-

Partial

-
-

IS 2404 (1993)

Malt extract - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, 5.2 (carbon)	-
Cl. 5.1, 5.2 (Manganese)	-
Cl. 5.1, 5.2 (Sulphur)	-
Cl. 5.1, 5.2 (Phosphorus)	-
Cl. 5.1, 5.2 (Nitrogen )	-
Cl. 5.1, 5.2 (aluminium)	-
Cl. 5.1, 5.2 (copper)	-
Cl. 5.1, 5.2 (silicon)	-
Cl. 5.1, 5.2 (chromium)	-

Partial

-
-

IS 9294 (1979)

Cold-Rolled Stainless Steel Strips for Razor Blades

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- appropriate parts of IS 228)	-
4.1 (Manganese- appropriate parts of IS 228)	-
4.1 (Silicon- appropriate parts of IS 228)	-
4.1 (Sulphur- appropriate parts of IS 228)	-
4.1 (Phosphorous- appropriate parts of IS 228)	-
4.1 (Chromium- appropriate parts of IS 228)	-
4.3 (Nickel- appropriate parts of IS 228)	-
4.3 (Molybdenum- appropriate parts of IS 228)	-
4.3 (Copper- appropriate parts of IS 229)	-

Partial

-
-

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Aluminium- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Nb- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (V- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Ti- IS 228 or any other established instrumental /Chemical method)	-
Clause 4,7.1 (Carbon)	-

Partial

-
-

IS 8951 (2001)

Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Copper- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nickel- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 & 7.2 Table 1 (Nitrogen- IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

IS 8917 (1978)

Specification for steel plates for galvanizing pots

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Silicon, Max.)	-
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Carbon)	-

Partial

-
-

IS 8748 (1978)

Specification for forged/rolled CTC segments

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3.1, Table 1 (Chromium)	-
Clause 3.1, Table 1 (Nickel )	-
Clause 3.1, Table 1 (Phosphorous)	-
Clause 3.1, Table 1 (Sulphur, Max)	-
Clause 3.1, Table 1 (Manganese)	-
Clause 3.1, Table 1 (Silicon, Max)	-
Clause 3.1, Table 1 (Carbon)	-

Partial

-
-

IS 8566 (1977)

Specification for steel wire for reeds

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1 (Phosphorous, Max.)	-
Clause 4.1 (Sulphur)	-
Clause 4.1 (Carbon)	-

Partial

-
-

IS 8565 (1977)

Specification for heald wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1 (Phosphorous, Max.)	-
Clause 4.1 (Sulphur)	-
Clause 4.1 (Manganese)	-
Clause 4.1 (Silicon)	-
Clause 4.1 (Carbon)	-

Partial

-
-

IS 8564 (1977)

Specification for steel wire for nipples for spokes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Tellurium )	-
Clause 5.1 (Lead)	-
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon, Max.)	-
Clause 5.1 (Carbon)	-

Partial

-
-

IS 8563 (1977)

Specification for half round mild steel wlRe for the manufacture of split pins

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Phosphorous, Max.)	-
Clause 5.1 (Sulphur, Max.)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Carbon, Max.)	-

Partial

-
-

IS 4430 (1979)

Specification for mould steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Silicon)	-
Cl. 6 (Manganese)	-
Cl. 6 (Nickel)	-
Cl. 6 (Chromium)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Vanadium)	-
Cl. 6 (Tungsten)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Copper)	-
Cl. 6 (Cobalt)	-

Partial

-
-

IS 4431 (1978)

Specification for carbon and carbon manganese free cutting steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Silicon)	-
Cl. 6 (Manganese)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Chromium)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Nickel)	-
Cl. 6 (Copper)	-
Cl. 6 (Vanadium)	-

Partial

-
-

IS 4687 (1995)

Gaskets and packings - Gland packings asbestos - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

IS 4882 (1979)

Specification for low carbon steel wire for rivets for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1,5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-
4.1 (Chromium- IS 228)	-
4.1 (Sulphur+Phosphorous- IS 228)	-
3.1 (Nitrogen- IS 228)	-

Partial

-
-

IS 9442 (1980)

Specification for hot-rolled steel plates, sheets and strips for manufacture of agricultural tillage discs

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1 (Carbon)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Phosphorous)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon)	-

Partial

-
-

IS 9485 (1980)

Specification for cold - Reduced and hot - Rolled carbon steel sheet for porcelain enamelling

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 1.1, 5.1-5.2 (Carbon)	-
Cl. 1.1, 5.1-5.2 (Manganese)	-
Cl. 1.1, 5.1-5.2 (Sulphur)	-
Cl. 1.1, 5.1-5.2 (Phosphorus)	-
Cl. 1.1, 5.1-5.2 (Sulphur + Phosphorus)	-
Cl. 1.1, 5.1-5.2 (Titanium)	-
Cl. 1.1, 5.1-5.2 (columbium/Niobium)	-
Cl. 1.1, 5.1-5.2 (Nitrogen)	-

Partial

-
-

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nickel-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Chromium-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nitrogen-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-

Partial

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Northern Regional Office Laboratory (NROL)

B-69, Industrial Focal Point, Phase VII, Mohali, Mohali, S.A.S Nagar, Punjab, 160059

- [email protected]

Scope List

No Record Found

No Record Found

No Record Found