BIS - LIMS (Laboratory Information Management System)

IDMA LABORATORIES LIMITED

PLOT NO 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 [email protected]

Scope List

Reset

154 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 5295 (2021)

Ethylene Glycol - Specification (Second Revision)

19150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 1(Colour, Hazen units/Pt-Co, Max)	-	3000	-
4.2, Table 1(Relative density1) at 20/20 °C)	-	1150	-
4.2, Table 1(Distillation range at 760 mm Hg (a) Initial boiling point, °C Min)	-	900	-
4.2 (Chem)(Distillation range at 760 mm Hg (b) The temperature at which 95 ml of material shall distil, °C, Max)	-	900	-
4.2, Table 1(Moisture content, percent by mass, Max)	-	800	-
4.2, Table 1(Acidity (as acetic acid), ppm, Max)	-	800	-
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min)	-	800	-
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at b) 275 nm, Min)	-	800	-
4.2, Table 1(Ultra-Violet transmittance in 1 cm cell at c) 350 nm, Min)	-	600	-
4.2, Table 1(Freezing point of equal volumes of material and water, Max)	-	200	-
4.2, Table 1(Iron content, ppm, Max)	-	900	-
4.2, Table 1(Chlorides content (as Cl), ppm, Max)	-	800	-
4.2, Table 1(Diethylene glycol content, ppm, Max)	-	1800	-
4.2, Table 1(Purity, percent, Min)	-	3500	-
4.2, Table 1(Aldehyde as CH3CHO or HCHO, ppm, Max)	-	3000	-

Complete

31 Dec, 2023

-
-

IS 12685 (1989)

Pesticides - Pendimethalin, technical - Specification

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.2 and 6.1 Table 1(Pendimethalin content)	-	1500	-
3.2 and 6.1 Table 1(Material insoluble in acetone)	-	800	-
3.2 and 6.1 Table 1(Acidity ( as HaSOh))	-	800	-
3.2 and 6.1 Table 1(Alkalinity; as NaOH),)	-	800	-
3.2 and 6.1 Table 1(Melting point)	-	1200	-

Complete

31 Dec, 2023

-
-

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	4700	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	0	-
Clause 7.1.3 (Colour and Texture)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	0	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2350	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2350	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	0	Note: 5% discount to BIS

Complete

31 Dec, 2023

-
-

IS 12299 (2021)

DAIRY WHITENER - SPECIFICATION First Revision

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 6.4/clause no(i)( Moisture)	-	300	-
Table 6.4/clause no(ii)( Milk fat)	-	400	-
Table 6.4/clause no(iii)(Milk protein)	-	400	-
Table 6.4/clause no(iv)(Insolubility index)	-	400	-
Table 6.4/clause no(v)(Total ash )	-	400	-
Table 6.4/clause no(vi)(Acid insoluble ash)	-	400	-
Table 6.4/clause no(viii)(Titrable acidity)	-	400	-
Table 2 /clause no 6.4 SI.No.i)(Aerobic Plate count)	-	300	-
Table 2 /clause no 6.4 SI.No.i)( coliform count)	-	300	-
Table 2 /clause no 6.4 SI.No.i)(S.aureus)	-	300	-
Table 2 /clause no 6.4 SI.No.i)(Yeast & Mould count)	-	300	-
Table 2 /clause no 6.4 SI.No.i)(Salmonella spp.)	-	350	-
Table 2 /clause no 6.4 SI.No.i)(Listeria monocytogenes)	-	350	-
Table 2 /clause no 6.4 SI.No.i)(Bacillus cereus)	-	350	-
Table 2 /clause no 6.4 SI.No.i)(Sulphite reducing clostridia)	-	300	-
Table 2 /clause no 6.4 SI.No.i)(E.coli)	-	300	-

Complete

31 Dec, 2023

-
-

IS 6031 (1997)

Calcium propionate, food grade - Specification (First Revision)

7300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(DESCRIPTION)	-	200	-
4.1(Identification Tests)	-	800	-
4.2(pH )	-	500	-
4.3, Table 1(Purity as C6H10O4Ca,)	-	800	-
4.3, Table 1(Moisture,)	-	700	-
4.3, Table 1(Matter insoluble in water)	-	700	-
4.3, Table 1(As)	-	900	-
4.3, Table 1(Heavy metals)	-	800	-
4.3, Table 1(Fe)	-	800	-
4.3, Table 1(F)	-	500	-
4.3, Table 1(Magnesium (as MgO))	-	600	-

Complete

31 Dec, 2023

-
-

IS 4448 (1994)

Benzoic acid, food grade - Specification (First Revision)

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	200	-
3.3 Table 1(Purity,expressed as C7H602)	-	1000	-
3.3 Table 1(Melting range of benzoic acid)	-	800	-
3.3 Table 1(Sulphated ash)	-	800	-
3.3 Table 1(Readily carbonizable substancances)	-	800	-
3.3 Table 1(Readily oxidizable substancances)	-	1000	-
3.3 Table 1(Loss on drying)	-	1000	-
3.3 Table 1(Chlorinated organic compounds)	-	1000	-
3.3 Table 1(Arsenic )	-	900	-
3.3 Table 1(Heavy Metals)	-	900	-

Complete

31 Dec, 2023

-
-

IS 517 (2020)

Specification for Methanol ( Methyl Alcohol ) ( Third Revision )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Relative Density)	-	800	-
Table-1(Distillation range)	-	1200	-
Table-1(Residue on evaporation)	-	1000	-
Table-1(Alkalinity)	-	1000	-
Table-1(Acidity)	-	800	-
Table-1(Aldehydes and Ketones)	-	1200	-
Table-1(Sulphur and compounds of Sulphur)	-	900	-
Table-1(Chlorines and Chlorine compound)	-	800	-
Table-1(Water compound)	-	800	-
Table-1(Purity)	-	1500	-

Complete

31 Dec, 2023

-
-

IS 16353 (2015)

Portland Cement Clinker - Specification

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-	700	-
Clause 5 Table 1(Ratio of percentage of alumina to that of iron oxide,)	-	500	-
Clause 5 Table 1(C3S, percent by mass)	-	100	-
Clause 5 Table 1(C3A, percent by mass)	-	100	-
Clause 5 Table 1(C3S+C2S, percent by mass)	-	100	-
Clause 5 Table 1(Total sulphur content calculated as sulphuric anhydride (SO3))	-	500	-
Clause 5 Table 1(Free lime)	-	500	-
Clause 5 Table 1(Chloride content)	-	200	-
Clause 5 Table 1(Magnesia)	-	200	-
Clause 5 Table 1(Alkali content)	-	500	-
Clause 5 Table 1(Total loss on ignition)	-	200	-
Clause 5 Table 1(Insoluble residue)	-	500	-
6.1 IS 4031(Part 2)(Fineness)	-	500	-
6.1 Table 2 i) b) IS 4031 (Part 3)(Soundness by Autoclave test method)	-	900	-
6.1 Table 2 i) a) IS 4031 (Part 3)(Soundness by Le-Chatelier method)	-	1000	-
6.1 Table 2 ii) a) IS 4031 (Part 5)(Initial Setting time)	-	500	-
6.1 Table 2 ii) b) IS 4031 (Part 5)(Final Setting time)	-	500	-
6.1 Table 2 iii) a) IS 4031 (Part 6)(Compressive Strength at 72±1 h)	-	1000	-
6.1 Table 2 iii) b) IS 4031 (Part 6)(Compressive Strength at 168±2 h)	-	1000	-
6.1 Table 2 iii) c) IS 4031 (Part 6)(Compressive Strength at 672±4 h)	-	1000	-

Complete

31 Dec, 2023

-
-

IS 15392 (2003)

Aluminium and aluminium alloy bare foil for food packaging - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(PINHOLE COUNT)	-	600	-
Clause 6(FREEDOM FROM DEFECTS)	-	300	-
Clause 7 Sub-Clause 7.1(Material)	-	5700	-
Clause 10 Table 2(Preferred Thickness)	-	500	-
Clause 11(Average Thickness)	-	500	-
Clause 14(Surface condition)	-	1000	-
Clause 12(Dimension and Tolerances: I) Width)	-	600	-
Clause 12(Dimension and Tolerances: 2) Length)	-	600	-

Complete

31 Dec, 2023

-
-

IS 6003 (2010)

Indented Wire For--Prestressed Concrete ”

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Diameter)	-	500	-
Cl 6.1.2(Weight)	-	500	-
Cl 7.1(Tensile Test On UTM)	-	700	-
Cl 7.2(Tensile Test On UTM)	-	800	-
Cl 7.3(Reverse Bend Test)	-	800	-
Cl 7.4(Tensile Test On UTM)	-	1000	-
Cl 7.5(Load )	-	23700	-
4.1.1(Phosphorus %)	-	1000	-
4.1.1(Sulphur %)	-	1000	-

Complete

31 Dec, 2023

-
-

IS 266 (1993)

Sulphuric acid - Specification (Third Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2(Description)	-	100	-
4.2&3 Table-1(i)(Total Acidity (as H2So4),)	-	500	-
4.2 Table-1(iii)(Iron (as Fe),)	-	500	-
4.2&3 Table-1(iv)(Chlorides (as ),)	-	500	-
4.2, Table-1(vii)(Oxiddizable Impurities(as S02),)	-	700	-
4.2Table-1(viii)(Organic matter)	-	700	-
4.2, Table-1(x)(Ammonia)	-	700	-
4.2, Table-1(ix)(Nitrate)	-	700	-
4.2Table-1(v)(Lead (as Pb))	-	700	-
4.2 Table-1(xi)(Selenium(as Se),)	-	700	-
4.2 Table-1(xii)(Mangnese (as Mn),)	-	-	-
4.2 Table-1(xiii)(Copper (as cu),)	-	-	-
4.2, Table-1(xiv)(Zinc (as Zn),)	-	-	-
4.2, Table-1(xv)(Nitrates,nitrites and ammonia(as N),)	-	-	-

Complete

31 Dec, 2023

-
-

IS 1664 (2002)

Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 5)(Description )	-	200	-
(Cl. 6.1)(Seiving through 212 micron IS Sieve),)	-	500	-
table 1, (Cl. 6.3)(Moisture)	-	500	-
table 1, (Cl. 6.3)(Calcium (as Ca), (On dry basis))	-	400	-
table 1, (Cl. 6.3)(Phosphorus (on dry basis))	-	600	-
table 1, (Cl. 6.3)(Magnesium( on dry basis))	-	500	-
table 1, (Cl. 6.3)(Iron (on dry basis))	-	600	-
table 1, (Cl. 6.3)(Iodine (as KI ) on dry basis,)	-	1000	-
table 1, (Cl. 6.3)(Copper (on dry basis))	-	1000	-
table 1, (Cl. 6.3)(Mangnanese (on dry basis))	-	1000	-
table 1, (Cl. 6.3)(Cobalt (on dry basis))	-	900	-
table 1, (Cl. 6.3)(Fluorine (on dry basis))	-	2000	-
table 1, (Cl. 6.3)(Zinc (on dry basis))	-	800	-
table 1, (Cl. 6.3)(Sulphur (on dry basis))	-	800	-
table 1, (Cl. 6.3)(Acid insoluble ash (on dry basis))	-	800	-
table 1, (Cl. 6.3)(Lead(as Pb), .)	-	800	-
table 1, (Cl. 6.3)(Arsenic(as As2O3),.)	-	800	-
table 1, (Cl. 6.3)(Total ash in moisture free sample)	-	800	-
table 1, (Cl. 6.3)(Presence of protenious/organic impurities)	-	1000	-

Complete

31 Dec, 2023

-
-

IS 538 (2020)

Phenol ( Carbolic Acid ) — Specification ( Third Revision )

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	200	-
4.2(Solubility in Water)	-	1200	-
4.3 Table 1(Crystallization point, grade A)	-	4000	-
4.3 Table 1(Crystallization point, grade B)	-	4000	-
4.3 Table 1(Moisture, all grades)	-	1500	-
4.3 Table 1(Residue on evaporation by mass, all grades)	-	1500	-
4.3 Table 1(Purity, grade A)	-	600	-
4.3 Table 1(Purity, grade B)	-	600	-
4.3 Table 1(Colour and APHA/HU)	-	3000	-

Complete

31 Dec, 2023

-
-

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Form and Description)	-	200	-
Cl. 3.3 and 3.4(Table 1, S. no i)(Sodium carbonate (as Na2CO3), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no ii)(Sodium hydroxide (as NaOH), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no iii)(Chlorides (as Cl– ), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no iv)(Sulphates (as SO4), percent by mass)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no v)(Silicates (as SiO2), percent by mass)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no vi)(Iron (as Fe))	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no vii)(Copper)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no viii)(Manganese)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no ix)(Chlorates and per-chlorates)	-	1000	-
Cl. 3.3 and 3.4(Table 1, S. no x)(Matter insoluble water, percent by mass)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xi)(Total mercury)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xii)(Sodium hydroxide)	-	600	-

Complete

31 Dec, 2023

-
-

IS 10116 (2015)

Boric acid - Specification (First Revision)

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 ( Description)	-	200	-
4.2, 4.3, 4.4, Table 1(Boric acid (as H3BO3 ))	-	500	-
4.2, 4.3, 4.4, Table 1(Moisture)	-	500	-
4.2, 4.3, 4.4, Table 1(Water insoluble matter)	-	500	-
4.2, 4.3, 4.4, Table 1(Heavy metals (as Pb))	-	700	-
4.2, 4.3, 4.4, Table 1(Iron (as Fe))	-	700	-
4.2, 4.3, 4.4, Table 1(Ca)	-	600	-
4.2, 4.3, 4.4, Table 1(As)	-	700	-
4.2, 4.3, 4.4, Table 1(Na)	-	700	-
4.2, 4.3, 4.4, Table 1(Cl)	-	700	-
4.2, 4.3, 4.4, Table 1(Sulphate (as SO4 ))	-	700	-
4.2, 4.3, 4.4, Table 1(Phosphate (PO4 ))	-	700	-

Complete

31 Dec, 2023

-
-

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(General - IS 12817 )	-	100	-
7.2(Knuckles - IS 12817 )	-	100	-
7.3(Pins- IS 12817 )	-	100	-
7.4(Screw Holes- IS 12817 )	-	100	-
7.4.2(Position of screw holes - IS 12817 )	-	100	-
8.0(Finish - IS 12817 )	-	100	-
6.2, Table 1 to 6(Length , A -IS 12817)	-	100	-
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	100	-
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	100	-
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	100	-
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	150	-
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	150	-
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	100	-
Clause 7.4.2 (Dimension - Z )	-	100	-
Clause 7.4.2 (Dimension - Y )	-	100	-
Clause 7.4.2 (Dimension - X )	-	100	-
Clause 4.1.2(Silicon (Pin) )	-	150	-
Clause 4.1.2(Phosphorus (Pin) )	-	150	-
Clause 4.1.2(Sulphur (Pin) )	-	150	-
Clause 4.1.2(Manganese (Pin) )	-	150	-
Clause 4.1.2(Carbon (Pin) )	-	150	-
Clause 4.1.1(Silicon (Flap) )	-	150	-
Clause 4.1.1(Phosphorus (Flap) )	-	100	-
Clause 4.1.1(Sulphur (Flap) )	-	100	-
Clause 4.1.1(Manganese (Flap) )	-	100	-
Clause 4.1.1(Carbon (Flap) )	-	100	-

Complete

31 Dec, 2023

-
-

IS 1165 (2002)

Milk Powder (Bi-lingual)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	100	NA
3.2(Flavour and taste)	-	200	NA
3.4.5(Moisture)	-	400	NA
3.4.5(Total solids)	-	200	NA
3.4.5(Fat)	-	400	NA
3.4.5(Insolubility index)	-	200	NA
3.4.5(Total ash)	-	400	NA
3.4.5(Titratable acidity (lactic acid))	-	300	NA
3.5(Bacterial count)	-	400	NA
3.5.2(Coliform count)	-	400	NA
3.5.3(Staphylococcus Aureus)	-	500	NA
3.5.4(Salmonella)	-	500	NA
3.5.5(Shigella)	-	500	NA

Complete

31 Dec, 2023

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Sacks)	-	500	-
4.3.1(Bottom Seam)	-	0	-
4.3.1( The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	400	-
5.2 and Table 1 iv(Picks per dm )	-	400	-
5.1 and Table 1 v(Mass of sack )	-	600	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1250	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1250	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	2000	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	750	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	750	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2500	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2500	-
5.2 and Table 1 x(Ash content )	-	1400	-

Complete

31 Dec, 2023

-
-

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Description)	-	100	NA
5.3 Table-1 i(Available chlorine)	-	800	NA
5.3 Table-1 ii(Stability, loss of Chlorine on the basis of initial available chlorine )	-	800	NA
5.3 Table-1 iiii(Moisture, percent by mass. )	-	600	NA
5.3 Table-1 iv(Particle size (Passing through 170 mm IS Sieve). Percent by mass)	-	500	-
5.3 - Table 1 - Sl No - iv(Particle Size (passing through 1.70 mm IS Sieve) - Annex D)	-	0	-
5.3 - Table 1 - Sl No - i(Available Chlorine - Annex A)	-	0	-
5.3 - Table 1 - Sl No - ii(Stability, loss of chlorine on the basis of initial available chlorine - Annex B)	-	0	-
5.3 - Table 1 - Sl No - iii(Moisture - Annex C)	-	0	-
Clause 5.4(Keeping Quality )	-	200	-

Complete

31 Dec, 2023

-
-

IS 1065 : Part 2 (2019)

Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3, Table-1, Sr.no. 1(Available Chlorine)	-	800	NA
Cl. 5.3, Table-1, Sr.no. 2(Stability, loss of Chlorine on the basis of initial available chlorine)	-	800	NA
Cl. 5.3, Table-1, Sr.no. 3(Moisture )	-	600	NA
Cl. 5.3, Table-1, Sr.no. 4(Particle size(passing though 1.70 mm I.S. Sieve))	-	500	NA
Cl. 5.3, Table-1, Sr.no. 5(Lead(as Pb))	-	150	NA
Cl. 5.3, Table-1, Sr.no. 6(Arsenic (as As))	-	200	NA
Cl. 5.3, Table-1, Sr.no. 7(Manganese(as Mn))	-	150	NA
Cl. 5.3, Table-1, Sr.no. 8(Chromium (as Cr6+))	-	250	NA
Cl. 5.3, Table-1, Sr.no. 9(Mercury( as Hg) )	-	250	NA
Cl. 5.3, Table-1, Sr.no. 10(Cadmium(as Cd))	-	250	NA
Cl. 5.3, Table-1, Sr.no. 11(Selenium (as Se))	-	250	-
Clause 5.2(Description)	-	100	-
Clause 5.4(Keeping Quality )	-	200	-

Complete

31 Dec, 2023

-
-

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

3800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	200	NA
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	200	NA
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	150	NA
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	150	NA
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	400	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	275	NA
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	275	NA
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	300	NA
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	300	NA
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	350	NA
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	200	NA
4-4.4(Manufacture-Hemming at the Mouth )	-	150	NA
4-4.5(Manufacture- Freedom from Defects )	-	300	Note: Reporting Charges RS-200/-Clause no- 5.4.2.1(iii) pH value -350RS/-

Complete

31 Dec, 2023

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Average Compressive Strength)	-	1300	NA
Cl 5.4 .2(pH)	-	300	NA
Cl 5.4 Table 1 (iv)(Chloride)	-	300	NA
Cl 5.4 Table 1 (iii)(Sulphate)	-	300	NA
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	350	NA
Cl 5.4 Table 1 (i)(Organic Solids)	-	350	NA
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	NA
Cl 5.4 (b)(Alkalinity)	-	0	NA
Cl 5.4 (a)(Acidity)	-	0	NA
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	300	NA
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	300	NA
Clause 5.4(Description)	-	100	NA
16.1(Compressive Strength of Individual Samples )	-	300	NA
16.1(Compressive Strength of Individual Samples )	-	300	NA

Complete

31 Dec, 2023

-
-

IS 15158 (2002)

Pretilachlor, technical - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	50	NA
4.6.2(TRANSPARANCY)	-	300	NA
4.6.3(LEAKAGE TEST)	-	0	NA
4.6.4(DROP TEST)	-	500	NA
4.6.5(MIGRATION TEST)	-	500	NA
4.6.6(PORTABILITY TEST)	-	1300	NA
4.6.5.1 (chem)(Colour migration (Caps))	-	200	-
4.6.5.1 (chem)(Colour migration (Container))	-	100	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	100	-
4.2 (chem)(Design, Shape & Dimension)	-	100	-
4.3 (chem)(Workmanship, Finish & Appearance)	-	50	-
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	50	-
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	50	-
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	50	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	50	-
4.6.2 Annex A(Transparency)	-	0	-
4.6.2.1, Annex A(Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity))	-	0	-
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	300	-
Cl. 4.6.3(Cl. 4.6.3 Vibration Leakage)	-	100	-
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	100	-
4.2 (chem)(a) Peelability)	-	100	-
4.2(Design, Shape & Dimension )	-	0	-
4.3(Workmanship, Finish & Appearance)	-	0	-

Complete

31 Dec, 2023

-
-

IS 8963 (2006)

Chlorpyrifos, technical - (First Revision) specification

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description )	-	200	NA
3.2 Table 1(Chlorpyrifos content)	-	600	NA
3.2 Table 1(Acidity)	-	300	NA
3.2 Table 1(Material insoluble in acetone)	-	400	NA
3.2 Table 1(Water content)	-	300	Note: Reporting Charges RS-200/-

Complete

31 Dec, 2023

-
-

IS 15616 (2006)

Alphacypermethrin, technical - Specification

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	200	NA
3.2 (i)(Alphacypermethrin content)	-	2000	NA
3.2 (ii)((1R cis) R and (1S cis) S isomers)	-	1500	NA
3.2 (iii)(Trans isomer)	-	1500	NA
3.2 (iv)(Alkalinity (as NaOH))	-	700	NA
3.2 (v)(Moisture content)	-	600	NA

Complete

31 Dec, 2023

-
-

IS 15757 (2007)

Follow-up formula - Complementary foods - Specification

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.8.1 (Bacterial Count )	-	600	-
5.8.2 (Coliform Count )	-	600	-
5.8.3 (Escherichia Coli )	-	600	-
5.8.4 (Staphylococcus Aureus )	-	900	-
5.8.5 (Salmonella and Shigella )	-	1000	-
5.8.6 (Yeast and Mould Count )	-	600	-
Table 1 (viii)(Iron (AnnexD of IS 14433 ))	-	350	-
Table 1 (xxix)( Copper (Clause 15 of IS 1699))	-	350	-
Table 1 (xxx)(Zinc (Clause 15 of IS 1699))	-	350	-
Table 1 (xxxi)(Manganese (Clause 35 of IS 3025))	-	350	-
Table 1 (xxxii)(Selenium (Clause 35 of IS 3025))	-	350	-
Table 1 (xxxiii)(Heavy metals: a) Lead (IS 12074))	-	350	-
Table 1 (xxxiii)(Heavy metals: b) Arsenic (IS 11124))	-	350	-
Table 1 (xxxiii)(Heavy metals: c) Tin (Clause 17 of IS 2860))	-	350	-
Table 1 (iii)(Linoleate)	-	350	-
Cl 5.7(Flavour and Odour)	-	100	-
Table 1 (i)(Moisture)	-	350	-
Table 1 (ii)(Total milk protein)	-	600	-
Table 1 (iii)(Total fat)	-	350	-
Table 1 (iv)(Total ash (Annex B of IS 14433))	-	350	-
Table 1 (v)(Acid insoluble ash (Annex B of IS 14433))	-	350	-
Table 1 (vi)(Solubility: Solubility index (IS 12759) )	-	350	-
Table 1 (xxii)(Sodium (IS 12760))	-	350	-
Table 1 (xxiii)(Potassium (IS 12760))	-	350	-
Table 1 (xxiv)(Chloride (IS 11763 ))	-	350	-
Table 1 (xxv)(Calcium (IS 5949))	-	350	-
Table 1 (xxvi)(Phosphorus (IS 12756))	-	750	-
Table 1 (xxvii)(Magnesium (IS 5949))	-	350	-
Table 1 (xxviii)(Iodine (ClauseA·2 of IS1224))	-	350	-
Table 1 (xxxiii)(Heavy metals: d)Cadmium (Clause 15 of IS 1699))	-	350	-
5.10.2.4(Aflatoxin B1)	-	350	-
5.10.1.7(pesticide residue)	-	500	-
Clause no 4(Description)	-	100	-
Clause no 5.1(Freedom from extraneous matter)	-	200	-

Complete

31 Dec, 2023

-
-

IS 6047 (2009)

Scouring products for utensil cleaning - Specification (First Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(Description)	-	100	NA
Cl.4.2, Table-1,(i)(Retention on 250 microne IS sieve)	-	600	NA
Cl.4.2, Table-1,(ii)(Active matter)	-	1200	NA
Cl.4.2, Table-1,(iii)(Active (reverse) alkalinity)	-	400	NA
Cl.4.2, Table-1,(iv)(Matter insoluble in alcohol)	-	400	NA
Cl.4.2, Table-1,(v)(Moisture and volatile Matter content at 105 degree C)	-	400	NA
Cl.4.2, Table-1,(vi)(Lather)	-	400	NA
Cl.4.2, Table-1,(vii)(Cleansing efficacy)	-	800	NA
Cl.4.2, Table-1,(viii)(Tough soil cleaning)	-	1400	NA
Cl.4.2, Table-1,(ix)(Surface damage)	-	1300	NA

Complete

31 Dec, 2023

-
-

IS 15936 (2011)

Pesticide - Bifenthrin, technical - Specification

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	800	NA
3.2, Table 1(Bifenthrin content)	-	2500	NA
3.2, Table 1(Cis isomer content)	-	1000	NA
3.2, Table 1(Acidity as H2SO4)	-	700	Note: Reporting Charges RS-200/- 5% Discount to BIS

Complete

31 Dec, 2023

-
-

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

4500 View breakup
Rs. 4500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	400	NA
Cl 12.2(Concavity & Convexity )	-	300	NA
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	300	NA
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	300	NA
Cl 12.5(Water absorption)	-	600	NA
Cl 12.6(Wet transverse strength )	-	1100	NA
Cl 12.7(Resistance to wear)	-	1000	NA
Cl 11(Suface Finish)	-	300	Note: Reporting Charges RS-200/-

Complete

31 Dec, 2023

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

IDMA LABORATORIES LIMITED

PLOT NO 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 [email protected]

Scope List

No Record Found