BIS - LIMS (Laboratory Information Management System)

IDMA LABORATORIES LIMITED

PLOT NO 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 [email protected]

Scope List

Reset

154 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

151

IS 455 (2015)

Portland slag cement - Specification

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	1700	NA
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	200	NA
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	250	NA
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	200	NA
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	850	NA
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	200	NA
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	700	NA
7 Table 1 i(Fineness IS 4031(Part 2))	-	350	NA
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	350	NA
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	800	NA
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	400	NA
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	600	NA
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	600	NA
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	600	NA Note: Reporting charges RS/-200
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	-	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	-	-
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	-	-
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	-	-
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	-	-
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	-	-

Complete

31 Dec, 2023

-
-

152

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.2(a)( Aggregates Impact Value)	-	240	NA
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	200	NA
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	480	NA
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	200	NA
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	200	NA
5.4.3(a)( Aggregate Abrasion Value)	-	480	NA
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	240	NA
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	240	NA
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	200	NA
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	480	NA
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	360	NA
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	200	NA
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	200	NA
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	200	NA
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	200	NA
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	200	NA
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	200	NA
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	480	NA
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	360	NA
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	200	NA
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	240	NA
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	240	NA
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	200	NA
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	240	NA
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	480	NA
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	480	NA
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	240	NA
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	400	NA
Clause 5.6(Nature of Aggregate)	-	120	NA
Clause 5.6(Dissolved Silica)	-	120	NA
Clause 5.6(Reduction in Alkalinity)	-	240	NA
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	240	NA

Complete

31 Dec, 2023

-
-

153

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 ii a(Expansion by Le Chatelier)	-	-	-
7 Table-3 ii b(Expansion by Autoclave)	-	-	-
7 Table-3 iii a(Setting Time Initial)	-	-	-
7 Table-3 iii b(Setting Time Final)	-	-	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	-	-
6.1 Table-2 viii(Alkali content)	-	-	-
6.1 Table-2 vii(Chloride content)	-	-	-
6.1 Table-2 vi(Loss on ignition)	-	-	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	-	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	-	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	-	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	-	-
6.1 Table-2 iii.(Insoluble residue)	-	-	-
7 Table-3 i.(Fineness)	-	-	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	-	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	-	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	-	-

Complete

31 Dec, 2023

-
-

154

IS 253 (2014)

Specification for common salt (Fourth Revision)

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -3 for common salt 3.1 ( 3.1.1 ) ( The material shall be crystalline solid, white or pale pink or light grey in colour.)	-	140	5% discount to BIS
Clause -3 for common salt 3.1 ( 3.1.2 ) Annex-2(Moisture The material shall contain not more than 6.0 percent by mass of moisture, on as received basis, when tested according to the method given in A-2)	-	420	5% discount to BIS
Clause-3.2 for dairy salt (3.2.1)(The material shall be crystalline white solid and free from any visible impurities.)	-	140	5% discount to BIS
Clause-3.2 for dairy salt (3.2.3) Annex -2(3.2.3 Moisture The material shall contain not more than 0.5 percent by mass of moisture, on as received basis, when tested according to the methods given in A-2.)	-	420	5% discount to BIS
Table 1 (i) Annex -4(Water insoluble matter, common)	-	700	5% discount to BIS
Table 1 (ii) Annex-5(Chloride content (as NaCl)common)	-	840	5% discount to BIS
Table 1 (iii) Annex-6( Matter soluble in water, other than sodium chloride, common)	-	400	5% discount to BIS
Table 1 (iv)(Calcium (as Ca), water soluble, percent by mass, common)	-	210	5% discount to BIS
Table 1 (v)(Magnesium (as Mg), water soluble, percent by mass, common )	-	210	5% discount to BIS
Table 1 (vi)(Sulphate as SO2 percent by mass, common)	-	700	5% discount to BIS
Table 1 (vii) Annex-9(Alkalinity (as Na2CO3), common)	-	490	5% discount to BIS
Table 1 (viii)(Lead (as Pb), common)	-	210	5% discount to BIS
Table 1 (ix)(Iron (as Fe), common)	-	210	5% discount to BIS
Table 1 (x) Annex-11(x) Arsenic (as As), common)	-	210	5% discount to BIS
Table 1 (xi) Annex-12(Copper (as Cu), common)	-	210	5% discount to BIS Note: Reporting- RS/- 200 and clause no-3.1.3 i.e. determination of ferrocyanide - RS/-350 (5% discount to BIS)

Complete

31 Dec, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

IDMA LABORATORIES LIMITED

PLOT NO 391 INDUSTRIAL AREA PHASE 1, PANCHKULA, Panchkula, Haryana, 134113

9888002607 [email protected]

Scope List