BIS - LIMS (Laboratory Information Management System)

BIS, Eastern Regional Office Laboratory (EROL)

Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W, Kankurgachi, Kolkata, Kolkata, West Bengal, 700054

- [email protected]

Scope List

Reset

366 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

301

IS 5484 (1997)

Ec grade aluminium rod produced by continuous casting and rolling - Specification (Second Revision)

complete

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Diameter - IS:5484)	-
8-Table-1 (Tensile Strength - IS:1608)	-
9 (Resistyvity at 20 degree C -IS:398(P-2))	-
11.1 (Joint- IS:5484)	-
12.1 (Freedom from defects- IS:5484)	-
12.2 (Finish - IS:5484)	-
5.1 -Table-1, ii (Silicon - IS:504)	-
5.1 -Table-1, iii (Iron - IS:504)	-
5.1 -Table-1, iv (Copper - IS:504)	-
5.1 -Table-1, vi (Manganese - IS:504)	-
5.1 -Table-1, vi (Chromium - IS:504)	-

Partial

-
-

302

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
9 (Freedom from defects , IS 8952)	-
10 ,a) (Macro examination - IS 11371)	-
11,12 (Dimensions & Tolerance)	-

Partial

-
-

303

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4 (Freedom from defects)	-
7.5 (Hardness)	-
7.6.2 (i) Yield stess/.2% Proof stress, Mpa)	-
7.6.2 (ii)Ultimate Tensile Strength, Mpa)	-
7.6.2 (iii)Elongation, %)	-
7.6.2 (iv) Reduction in area)	-

Partial

-
-

304

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

- View breakup
Rs.1500/- and Material testing charges as per relevant referred ISs

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1-Total 2 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-S)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-W)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
7.1 (MANUFACTURE-General)	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996) (Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-
8.2 (FINISH-anodic casting -Min Avg thickness)	-
8.2 (FINISH-anodic casting -Min Local thickness)	-

Partial

-
-

305

IS 12681 (1989)

Sodium nitrate for explosives and pyrotechnic industry - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Partial

-
-

306

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Carbon - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Manganese - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Phosphorus - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Sulphur - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Carbon - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Manganese - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Sulphur - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Phosphorus - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Silicon - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Carbon Equivalen(CE) - IS 228)	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009) (Chemical composition - Sulphur and/or Phosphorous)	-
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts)	-
5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts)	-
5.2.4 Table 4 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-

Complete

-
-

307

IS 9962 (1981)

Specification for steel wire for needles

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Nominal size of wire-IS 9962)	-
7.1 (Tensile Test - IS 1608(Pt -1))	-
9 (Freedom from defects-IS 9962)	-

Partial

-
-

308

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1 (UTM)	-
Cl 14 (Length, Width & Thickness)	-
Cl 13 (Weight)	-
Cl 12 (Workmanship)	-

Partial

-
-

309

IS 1812 (1982)

Specification for carbon steel wire for the manufacture of wood screws (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Complete

-
-

310

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

Partial

-
-

311

IS 15848 (2009)

Zinc sulphate, monohydrate, agricultural grade - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.Table 1.i (Zinc (as Zn))	-
3.2.Table 1.ii (Magnesium (as Mg)	-
3.2.Table 1.iii (Copper (as Cu))	-
3.2.Table 1.iv (Lead (as Pb))	-
3.2.Table 1.v (pH of 5 percent solution)	-
3.2.Table 1.vi (Matter insoluble in water)	-

Partial

-
-

312

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, 5.1, 8.1 & 8.2 (Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
5 and 10.3.1 (Tensile strength. IS 1608)	-
5 and 10.3.1 (Yield Stress. IS 1608)	-
5 and 10.3.1 (Percentage Elongation. . IS 1608)	-
11.3 ( Bend Test. IS 1599)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (D)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (B)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (t)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R1)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R2)	-
Cl 12 of IS 15911 and Table 2.2 of IS 808 (Mass. IS 808)	-
7 (Freedom from defects)	-
Cl 12 of IS 15911 and Table 1 of IS 1732 (Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-
Cl 12 of IS 15911 and Table 2 of IS 1732 (Clauses 3.1, 4.1,4.1.1 and Table 1 of IS 1732)	-
Cl 12 of IS 15911 and Table 2 of IS 1863 (Clauses 5.1 and Table 2 of IS 1863)	-
Cl 12 of IS 15911 and Table 1 of IS 3954 (Clauses 4, 6.1 and Table 2 of IS 3954)	-
Cl 12 of IS 15911 and Table 1 of IS 1173 (Clauses 3.1 , 5.1 and Table 1 of IS 1173)	-
Cl 12 of IS 15911 and Table 1 of IS 1252 (Clauses 4.1 , 6.1 and Table 1 of IS 1252)	-

Partial

-
-

313

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-

Complete

-
-

314

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 Table-1 (Sizes Diameter of Line wire)	-
7.1 (Manufacture)	-
7.2 (Manufacture)	-
9.1 (Freedom from defects)	-
12.1 (Breaking load)	-
12.1 (Tensile Strength)	-
12.3 (Ductility)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
12.2.1 (Mass of zinc coating (line wire))	-
12.2.2 (Mass of zinc coating (point wire))	-
12.2 (Uniformity of zinc coating)	-

Partial

-
-

315

IS 1554 : Part 2 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision)

Partial

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (CONDUCTOR)	-
3.1.1 (CONDUCTOR)	-
4.1 (INSULATION)	-
5.1 (SCREENING)	-
5.1.1 (Non-magnetic Metallic Tape for SingleCore Unscreened and Unarmoured Cables)	-
6.1 (FILLERS AND INNER SHEATH)	-
11.1 (INSULATION)	-
11.2 (INSULATION : Thickness of Insulation)	-
11.3 (INSULATION : Tolerance on Thickness of Insulation)	-
11.4 (INSULATION : Application of Insulation)	-
12.1 (INSULATION SCREENING)	-
14.1 (LAYING UP OF CORES)	-
15.1 (INNER SHEATH (COMMON COVERING))	-
15.4 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
15.4.1 (INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-
16.1.1 (ARMOURING : Application)	-
16.1.2 (ARMOURING : Application)	-
16.1.3 (ARMOURING : Direction of lay )	-
16.1.4 (ARMOURING : Application)	-
16.2.2 (ARMOURING : Type of Armour)	-
16.3 (Armouring : Dimensions -Wire Diameter)	-
16.3 (Armouring : Dimensions -Formed wire )	-
16.4 (ARMOURING : Joints)	-
16.5 (ARMOURING : Resistance)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
17.2 (OUTER SHEATH : colour )	-
17.3.1 (Thickness of Outer Sheath : Unarmoured Cables)	-
17.3.2 (Thickness of Outer Sheath : Armoured Cables)	-
18.1 a) 1) (Tests on Conductor : Annealing test (for copper))	-
18.1 a) 2) (Tensile test (for aluminium) - Before stranding )	-
18.1 a) 2) (Tensile test (for aluminium) - After stranding )	-
18.1 a) 3) (Tests on Conductor : Wrapping test ( for aluminium))	-
18.1 a)4) (Tests on conductor : Conductor resistance test - Main conductor )	-
18.1 a)4) (Resistance test - Neutral conductor )	-
18.1 d) 1) (Phyaical tests for insulation : Tensile Test)	-
18.1 d) 1) (Phyaical tests for insulation : Elongation )	-
18.1 d) 1) (Physical tests for sheath : Tensile stregth )	-
18.1 d) 1) (Physical tests for sheath : Elongation )	-
18.1 d) 2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-
18.1 d) 2) (Phyaical tests for insulation - Ageing in air oven : Elongation )	-
18.1 d) 2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
18.1 d) 2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
18.1 d) 2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
18.1 d) 2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
18.1 d) 2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
18.1 d) 3) (Phyaical tests for insulation : Shrinkage )	-
18.1 d) 3) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
18.1 d) 3) (Phyaical tests for Sheath : Shrinkage )	-
18.1 d) 5) ( Loss of mass in air oven- Insulation )	-
18.1 d) 5) ( Loss of mass in air oven- sheath )	-
18.1 d) 6) (Heat shock test- Insulation )	-
18.1 d) 6) (Heat shock test- sheath )	-
18.1 d) 7) (Thermal stability- insulation )	-
18.1 d) 7) (Thermal stability- Sheath )	-
18.1 d) 8) (Water absorption (gravimetric)(for insulation, where applicable))	-
18.1 e) (Insulation resistance test : Volume Resistivity )	-
18.1 e) (Insulation resistance test : IR Constant )	-
19.8 (Flammability test)	-
20.1 (IDENTIFICATION : Manufacturer's Identification)	-
20.2 (IDENTIFICATION : Cable Identification)	-
20.3 (IDENTIFICATION : Cable Code)	-

Partial

-
-

316

IS 191 (2007)

Copper - Specification (Fourth Revision)

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 (FREEDOM FROM DEFECTS)	-
9.1- Table 5 (Mass Resistivity- IS 3635)	-
5.2 (Billets)	-
5.4-Table 3 (For Billets) (Mass)	-
5.2-Table 3 (For Billets) (Length)	-
7.1 - Table 4 (Copper (any Silver present to be counted as copper)-IS440)	-

Partial

-
-

317

IS 14652 (1999)

18 percent nickel maraging steel bars and rods - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Phosphorous-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Manganese-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Silicon-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Chromium-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Nickel-Method mutually agreed between supplier & purchaser)	-
4.1 Table 1 (Copper-Method mutually agreed between supplier & purchaser)	-

Partial

-
-

318

IS 1566 (1982)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Sulphur-Relevant Parts of IS 228)	-
4.1 (Phosphorous-Relevant Parts of IS 228)	-
4.1 (Nitrogen-Relevant Parts of IS 228)	-
6 (DIMENSIONS)	-
7 (SIZES OF SHEETS ‘OR ROLLS)	-
8 (MASS)	-
11.2 (Tensile Test)	-
11.3 (Reverse Bend Test)	-

Partial

-
-

319

IS 12776 (2002)

Galvanized strand for earthing - Specification (First Revision)

Stress strain

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Freedom From Defects (IS 12776))	-
5.3 (Joints in wires (IS 12776))	-
6- Annex-A, Sl-2 (Size of the wire (IS 12776))	-
6- Annex-A, Sl-8 (Lay (IS 12776))	-
8.2-Annex-A,Sl-6 (Elongation of wire, IS 10810(Part-37))	-
8.2-Annex-A,Sl-3 (Tensile Strength of wire IS 10810(Part-37))	-
8.3-Annex-A,Sl-12 (Resistance at 200 C (IS 12776))	-
8.4 (Wrapping Test (IS 12776))	-
8.5-Annex-A-Sl-7a (Amount of zinc Coating (IS 6745))	-
8.5-Annex-A-Sl-7b (Uniformity of Coating (IS 2633))	-
8.5-Annex-A-Sl-4 (Torsion Test IS 10810(Part-37))	-

Partial

-
-

320

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Complete

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as perIS 10810(Part- 42)))	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
9.3 (Galvanizing Requirements )	-
Clause 6.1, Table-1 (Sulphur)	-
Clause 6.1, Table-1 (Phosphorus)	-

Complete

-
-

321

IS 14491 (1997)

Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 & 7.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1 & 7.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
8.2 (Tensile Test-1608:Part 1)	-
8.2, Table 3 (i)Yield Strength, Mpa)	-
8.2, Table 3 (ii) Tensile Strength, Mpa)	-
8.2, Table 3 (iii)Elongation, %)	-
8.4, Table 3 (Bend)	-
10 (FREEDOM FROM DEFECTS)	-
11 ( DIMENSIONS AND DIMENSIONAL TOLERANCES )	-

Partial

-
-

322

IS 15103 (2002)

Fire resistant steel - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, C)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Si)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Mn)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, P)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, S)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Cr)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Mo)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 490, C)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 490, Si)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 490, Mn)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 410, Mn)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 490, P)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 490, S)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 490, Cr)	-
Clauses 6 & 7.1, Table- 1 (FR- Fe 490, Mo)	-

Partial

-
-

323

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 4.2 , IS 2530-1963, Cl. 10 (Cabon Black Content)	-
5.1 table -1 (DIMENSIONS OF PIPES)	-
6.1 (VISUAL APPEARANCE)	-
7.2 (Reversion Test)	-
7.3 (Tensile Test)	-
7.6 (Melt now Rate (MFR))	-

Partial

-
-

324

IS 12600 (1989)

Portland cement, low heat - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 v ( Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.2 (Lime after deduction of that necessary to combine with Sulphuric anhydride - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 note 2 (Alkali content as Na2O - Cl 4.11 of IS 4032:1985)	-

Partial

-
-

325

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 9 (Tensile Test On UTM)	-
Cl 11 (Workmanship)	-
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 9 (Tensile Test On UTM)	-
Cl 13 (Workmanship)	-
9.2 (Wrapping Test)	-
6 AND AS PER IS 7887 (CARBON)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
6 AND AS PER IS 7887 (ALUMINIUM)	-
6 AND AS PER IS 7887 (MICRO ALLOY)	-

Partial

-
-

326

IS 12367 (1988)

Specification for cold - Rolled carbon steel strips/coils for manufacture of welded tubes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 & 4.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1 & 4.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

Partial

-
-

327

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Chemical Composition - Sulphur - Laddle Analysis IS 228)	-
7.1 (Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-
8.6 -Table 6 (Sockets)	-
14 (WORKMANSHIP)	-

Partial

-
-

328

IS 12337 (1988)

Specification for manually operated fertilizer broadcaster

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1, Table-1 (Carbon)	-
Cl.3.1, Table-1 (Sulphur)	-
Cl.3.1, Table-1 (Phosphorus)	-
Cl.3.1, Table-1 (Manganese)	-
Cl.3.1, Table-1 (Silicon)	-
Cl.3.1, Table-1 (Nitrogen)	-
Cl.3.1, Table-1 (Chromium)	-
Cl.3.1, Table-1 (Nickel)	-
Cl.3.1, Table-1 (Copper)	-

Partial

-
-

329

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
7 (Workmanship & Finish)	-
8 (Freedom from defects)	-
6.1, Table 3 (Tensile Test-1608:Part 1)	-
6.1, Table 3 (Yield Strength, Mpa)	-
6.1, Table 3 (Elongation, %)	-
6.1, Table 3 (Tensile Test-1608:Part 1)	-
6.1, Table 3 (Yield Strength, Mpa)	-
6.1, Table 3 (Elongation, %)	-
6.1, Table 3 (Reduction in area, Percent)	-

Partial

-
-

330

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

complete

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Conductor : Material -IS : 8130-2013)	-
4.1 (Insulation : Material -IS : 5831-1984)	-
5.1 (Sheath : materail IS : 5831-1984)	-
6.1 (Conductor : Construction IS : 8130-2013)	-
7.1 (Insulation : Application )	-
7.2 (Thickness of Insulation - average )	-
7.2 (Thickness of Insulation - Min. )	-
7.3 (Colour of Insulation)	-
8.1 (Nominal radial thickness of sheath )	-
8.2 (Thickness of Sheath)	-
8.2 (Thickness of Sheath - min.)	-
8.3 (Colour of Sheath)	-
9.1 a) (Annealing test)	-
9.1 b) (Conductor resistance test)	-
9.1 d) i) (Insulation : Tensile strength)	-
9.1 d) i) (Insulation : elongation at break)	-
9.1 d) i) (Sheath : Tensile strength)	-
9.1 d) i) (Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break)	-
9.1 d) iii ) (Loss of mass test - insulation )	-
9.1 d) iii ) (Loss of mass test - Sheath )	-
9.1 d) iv ) (Hot deformation - insulation )	-
9.1 d) iv ) (Hot deformation - sheath )	-
9.1 d) v ) (Heat shock - insulation )	-
9.1 d) v ) (Heat shock - Sheath )	-
9.1 d) vi ) (Shrinkage - insulation )	-
9.1 d) vi ) (Shrinkage - Sheath )	-
9.1 d) vi ) (Shrinkage : Crack observed - insulation )	-
9.1 f) (Insulation resistance test: Volume resistivity )	-
9.1 f) (Insulation resistance test : IR constant)	-
10.4 (Flammability Test )	-
10.2 (Voltage test )	-
11.1 (Manufacturer’s Identification)	-
11.2 (Cable Code)	-
12.1 (packing )	-
12.2 (Marking )	-
12.2.1 (Standard marks )	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Eastern Regional Office Laboratory (EROL)

Bureau of Indian Standards, P-230, CIT Scheme, VII- M, Block-W, Kankurgachi, Kolkata, Kolkata, West Bengal, 700054

- [email protected]

Scope List