BIS - LIMS (Laboratory Information Management System)

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 [email protected]

Scope List

Reset

66 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

upto 315mm

4219 View breakup
Rs.3,675/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2(Opacity- Appendix B)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

upto 1200 mm

20975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2.1(DIMENSIONS-Socket)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5(CLASSIFICATION OF PIPES)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 10.7(Sulphated Ash Content)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS
11.2(Resistance to External Blows at 0°C)	-	1300	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
7.2.1(DIMENSIONS-Socket)	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
5(CLASSIFICATION OF PIPES)	-	0	-
10.7(Sulphated Ash Content)	-	950	-
10.1(Colour)	-	0	-
10.3(Effect on Water Test)	-	3000	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
10.1(Colour)	-	0	-
10.3(Effect on Water)	-	0	-
7.2.1(DIMENSIONS-Socket)	-	0	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	-
D-2.1.2.4(Effect on Water Test)	-	0	-

Complete

23 Feb, 2024

-
-

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

17238 View breakup
Rs.17238/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(DIMENSIONS AND TOLERANCES-Liaear Dimension-Sheets or Rolls)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2(DIMENSIONS AND TOLERANCES-Liaear Dimension-Tiles)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	200	25% DISCOUNT ON TEST CHARGES FOR BIS
6. 1(COLOUR AND SURFACE CHARACTERISTICS)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(i)(REQUlREMENTS-Thickness Variation )	-	200	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(ii)(REQUlREMENTS-Width of sheet or roll )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(iii)(REQUlREMENTS-rile size )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(iv)(REQUlREMENTS-Squareness )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(iv)(REQUlREMENTS-Dimensional stability )	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(v)(REQUlREMENTS-Colour fastness to daylight )	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(vi)(REQUlREMENTS-Curling )	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(vii)(REQUlREMENTS-Residual indenration )	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(viii)(REQUlREMENTS-Flexibility )	-	1500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(ix)(REQUlREMENTS-Resistance to various substances-Scratch width )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(x)(REQUlREMENTS-Resistance to various substances )	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xi)(REQUlREMENTS-Ply adhesion )	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xii)(REQUlREMENTS-Moisture movernent )	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xiii)(REQUlREMENTS-Heat ageing and exudation )	-	10100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1-Table 1(xiii)(REQUlREMENTS-Elastic product)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

14938 View breakup
For Others: • Rs.4600/- • Rs.12700/- for Type-I • Rs.10250/- for Type-II • Rs.12600/- for Type-III • Rs.12600/- for Type-IV • Rs.6600/- for Natural compound • Rs.5825/- for Natural granules (PE Resin) • Rs.1875/- for Carbon black master batch • Rs.5100/- for Carbon black master batch For BIS: • Rs.3450/- • Rs.10775/- for Type-I • Rs.8875/- for Type-II • Rs.9575/- for Type-III • Rs.9575/- for Type-IV • Rs.4950/- for Natural compound • Rs.4525/- for Natural granules (PE Resin) • Rs.1406/- for Carbon black master batch • Rs.3825/- for Carbon black master batch

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2(Film Form)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.3(Odour)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6a(Carbon Black Content, Annex-A)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.6b(Ash Content, Annex-A)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Tolerance on Thickness, Annex-A)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Tear resistance , Annex B)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1, Table 3(Puncture resistance , Annex C)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Tear resistance , Annex B)	-	2450	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1, Table 4(Puncture resistance , Annex C)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
For black films only. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

37800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Slow Crack Growth Rate)	-	6000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.9 table-6(Elongation at Break)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.8(Tensile Strength for Butt-fusion)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5 (Oxidation Induction Time)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4( Melt Flow Rate)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2(Longitudinal Reversion Test)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4.1.2(Ovality)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 table -3 & 4(6.1 Dimensions)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.1(6.1.1 Identification Stripes)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Colour)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6, 6.1(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6, 6.1.1(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3 (PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6, 6.1.2(PIPE DESCRIPTION)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
8.6(Overall migration)	-	2000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3(Carbon black)	-	1625	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3(c)(Carbon Black Master Batch)	-	1406	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3(e)(Carbon Black Master Batch)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2(Polyethylene Resin)	-	4525	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

20050 View breakup
Rs.19675/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.1(MOISTURE CONTENT)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.2(Water resistance test)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.4(Tensile strength)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.5(Mycological test)	-	3200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.6 (Table 3)(Static bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.7 (Table 4)(Wet bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.8(Retention of preservative)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

Bureau of Indian Standards

The National Standards Body of India

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 [email protected]

Scope List