BIS - LIMS (Laboratory Information Management System)

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 [email protected]

Scope List

Reset

66 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

Polyethylene Material for Moulding & Extrusion

5293.75 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.1(Density)	-	500	-
5.2.1.2(MFI)	-	1100	-
5.4.3 10 ofIS 2530(Carbon black content)	-	925	-
5.5.6 IS 2530(Carbon black dispersion)	-	700	-

Complete

23 Feb, 2024

-
-

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

up to 1200 mm

20975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1300	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
5(Dimensions (Type 2 C Drums Figure 2))	-	0	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
9.1(PIPE ENDS)	-	300	-
8(SEALING RINGS)	-	300	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	250	-
5(CLASSIFICATION OF PIPES)	-	250	-
10.7(Sulphated Ash Content)	-	950	-
10.3(Effect on Water Test)	-	0	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-

Complete

23 Feb, 2024

-
-

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

Oriented unplasticized polyvinyl chloride (Pvc - O) pip

53875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	500	-
6.0(CLASSIFICATION OF PIPES, table-2)	-	0	-
7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance)	-	300	-
7.2( Colour)	-	300	-
7.3( Opacity)	-	575	-
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	500	-
8.1.2, table 4 to 7(Wall Thickness)	-	500	-
8.1.3 (Length, meter)	-	500	-
8.2 table-9(Dimensions of Integral Socket)	-	500	-
8.2 table-9( Pipe Ends)	-	500	-
9.3 table-12( Ring Stiffness)	-	1100	-
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	13400	-
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	-
9.4, annexure-E( Orientation Factor)	-	1400	-
10, table-13( PHYSICAL AND 1CHARACTERISTICS)	-	3000	-
11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints)	-	1000	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	1000	-
11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-	11000	-

Complete

23 Feb, 2024

-
-

IS 14399 : Part 1 and 2 (1996)

Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (GRP) Sectional Water Storage Tanks : Part 1 palels, Part 2 Guidelines for assembly, installation and test

Hot Press Moulded Thermosetting Glass Fibre Reinforced

12375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Flange of Panels)	-	250	-
6.4(Type/Thickness of panel)	-	250	-
7.0(Visual inspection of the panels)	-	300	-
8, Table-1, Annex-B(Tensile Strength)	-	1100	-
8, Table-1, Annex-C(Bending strength)	-	1100	-
8, Table-1, Annex-D(Elastic moduius in Bend)	-	1100	-
8, Table-1, Annex-E(Glass Content)	-	950	-
8, Table-1, Annex-F(Barcoal Hardness)	-	375	-
8, Table-1, Annex-G(Water Absorption)	-	600	-

Complete

23 Feb, 2024

-
-

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

UPVC / PIPES & FITTINGS

45713 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1 Table 2(Mean outside diameter)	-	500	-
6.3.2 Table 3(Wall thickness)	-	500	-
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	500	-
6.3.4.1(Wall thickness of sockets)	-	500	-
6.3.4.4(Type of fittings)	-	300	-
7.1(Appearance)	-	300	-
7.2(Colour )	-	300	-
7.3(Vicat softening temperature of pipes)	-	1100	-
7.4(Resistance to Dichloromethane)	-	1000	-
7.5(longitudinal reversion)	-	700	-
8.1(Appearance and colour)	-	300	-
8.2(Vicat softening temperature of fittings)	-	1100	-
8.3(Effect of Heating (Stress Relief Test))	-	700	-
9.2(Resistance to external blows at o C)	-	1100	-
9.3(Ring flexibility)	-	1100	-
9.4(Creep ratio)	-	1100	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	850	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	2000	-

Complete

23 Feb, 2024

-
-

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

Polyethylene

47750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	500	-
4.2(Carbon black- a)carbon content)	-	1850	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1400	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	3000	-
4.1.3(Workmanship and Appearance)	-	300	-
4.1.4(Holding attachments for coupler parts)	-	850	-
4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	-
4.1.5(Rubber rings- B) Change in hardness)	-	375	-
3(QUICK COUPLED PIPES)	-	1050	-
4(QUICK COUPLED FITTINGS)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	1600	-
7.1(Hydraulic Characteristics - Acceptance test)	-	4800	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Test- i) Tensile Strength)	-	1100	-
7.3(Tensile Test - ii)Elongation at Break)	-	1100	-
7.4(Fusion Compatibility Test- a) Quality test)	-	4800	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	500	-
7.6(Melt Flow Rate)	-	1100	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
6.1.3(Weldability Test- a) Quality test)	-	4800	-
6.1.3.2(Quick coupled fittings)	-	1600	-
6.2, 6.2.1(Quick Coupled Fittings)	-	4800	-

Complete

23 Feb, 2024

-
-

IS 14856 (2000)

Glass fibre reinforced plastic (GRP) panel type door shutters for internal use - Specification

11181 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1(CONSTRUCTION/ FABRICATION)	-	1000		-

Complete

23 Feb, 2024

-
-

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

11950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	1050	-
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	300	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	900	-
3.7(Confluence Line Strength)	-	1500	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	2200	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1100	-
3.10.1(Suspension Test)	-	1100	-
3.10.2(Free-Fall Test)	-	1100	-

Complete

23 Feb, 2024

-
-

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs.Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
Rs.1744/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
Rs.1819/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
Rs.1744/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs.Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs.Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labsM/s Choksi Labs, Indore. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

8287.5 View breakup
Rs.7838/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	1050	25% Discount on Test Charges for BIS
2.3(Shape and Dimensions)	-	500	25% Discount on Test Charges for BIS
2.4(Mass )	-	300	25% Discount on Test Charges for BIS
2.6(Colour Fastness)	-	2200	25% Discount on Test Charges for BIS
2.7(Resistance to Stress)	-	1000	25% Discount on Test Charges for BIS
2.8(Resistance to Applied Load)	-	1000	25% Discount on Test Charges for BIS
2.9(Strength)	-	3100	25% Discount on Test Charges (Rs. 1900) for BIS No discount on conditioning charges of Rs. 1200/-
2.1(Dimensional Stability)	-	900	25% Discount on Test Charges for BIS

Complete

23 Feb, 2024

-
-

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

- View breakup
Rs.4219/--

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

- View breakup
Rs.4219

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

- View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 10840 (1994)

Blow moulded hdpe containers for packing of vanaspati - Specification (Second Revision)

- View breakup
Rs.4725/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
-

IS 12709 (1994)

Glass - Fibre reinforced plastic (Grp) pipes joints and fittings for use for potable water supply - Specification (First Revision)

- View breakup
Rs.44000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
-

IS 14482 (1997)

Irrigation equipment - Polyethylene micro tubes for drip irrigation - Specification

- View breakup
Rs.4725/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

17155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	25% discount on test charges for BIS
4.1(Raw Material)	-	1050	25% discount on test charges for BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% discount on test charges for BIS
4.2(Tapes – Linear Density )	-	500	25% discount on test charges for BIS
4.2(Construction)	-	300	25% discount on test charges for BIS
4.3(Sacks)	-	300	25% discount on test charges for BIS
4.3.1( The two rows of stitches shall be separated from each other)	-	300	25% discount on test charges for BIS
4.3.1(Bottom Seam)	-	300	25% discount on test charges for BIS
4.3.1( The outer stitch)	-	300	25% discount on test charges for BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	300	25% discount on test charges for BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	300	25% discount on test charges for BIS
4.3.1(The number of stitches/dm)	-	300	25% discount on test charges for BIS
4.3.2(Mouth)	-	300	25% discount on test charges for BIS
4.4 and Table 1 i(Capacity)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% discount on test charges for BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% discount on test charges for BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% discount on test charges for BIS
5.1 and Table 1 v(Mass of sack )	-	250	25% discount on test charges for BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	25% discount on test charges for BIS
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 x(Ash content )	-	950	25% discount on test charges for BIS

Complete

23 Feb, 2024

-
-

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

36293 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1(MANUFACTURE- IS 15907)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.1(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(Lamination- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(The width of the hem - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	2000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.1(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Finished width of pocket - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.4(Bonding- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (i)(Mass)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	8020	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	6920	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Length -IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Width - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Height - IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Water Proofness,IS 7941)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Water Proofness, IS 7940)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3.2(Construction- IS 15907)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found