BIS - LIMS (Laboratory Information Management System)

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 [email protected]

Scope List

Reset

66 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

199569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	4375	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(HDPE Fabric)	-	2250	25% DISCOUNT ON TEST CHARGES FOR BIS
5(MANUFACTURE)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1(Lamination)	-	4125	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2(Panel Width)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.3(Joints/Seams)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Mass, g/sq m)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Width)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	2600	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	178100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	2600	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	1300	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

17268 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	25% discount on test charges for BIS
4.1(Raw Material)	-	1050	25% discount on test charges for BIS
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% discount on test charges for BIS
4.2(Tapes – Linear Density )	-	500	25% discount on test charges for BIS
4.2(Construction)	-	300	25% discount on test charges for BIS
4.3(Sacks)	-	300	25% discount on test charges for BIS
4.3.1(Bottom Seam)	-	250	25% discount on test charges for BIS
4.3.1(The two rows of stitches shall be separated from each other)	-	250	25% discount on test charges for BIS
4.3.1( The outer stitch)	-	250	25% discount on test charges for BIS
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	250	25% discount on test charges for BIS
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	25% discount on test charges for BIS
4.3.1(stitches/dm)	-	250	25% discount on test charges for BIS
4.3.2(Mouth)	-	250	25% discount on test charges for BIS
4.4(Mass of the loose liner )	-	250	25% discount on test charges for BIS
4.4(Width of the loose liner)	-	250	25% discount on test charges for BIS
4.4(Length of the line)	-	250	25% discount on test charges for BIS
4.4(Bottom seam of the loose liner)	-	250	25% discount on test charges for BIS
4.4.1(Liner)	-	250	25% discount on test charges for BIS
4.5 and Table 1 i(Capacity)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% discount on test charges for BIS
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% discount on test charges for BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% discount on test charges for BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% discount on test charges for BIS
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	25% discount on test charges for BIS
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	25% discount on test charges for BIS
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11280	25% discount on test charges for BIS
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	25% discount on test charges for BIS
5.2 and Table 1 x(Ash content )	-	950	25% discount on test charges for BIS

Complete

23 Feb, 2024

-
-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

21693 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2(Unlaminated Fabric Mass )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.3.1(Bottom seam (IS 10789))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 ii(Dimensions )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 and Table 1 iii(Ends per dm )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 and Table 1 iv(Picks per dm )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 v(Mass of sack )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 viii(Elongation at break of fabric )	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2 and Table 1 x(Ash content )	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 14743 (1999)

Irrigation equipment - Hydrocyclone filters - Specification

7312.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(TECHNICAL REQUIREMENTS - Material)	-	500	25 % DISCOUNT FOR BIS
4.2.1(Construction)	-	250	25 % DISCOUNT FOR BIS
4.2.2(Construction)	-	250	25 % DISCOUNT FOR BIS
4.3.1(Cyclonic Vessel)	-	500	25 % DISCOUNT FOR BIS
4.4.1(Connections IS 554.)	-	500	25 % DISCOUNT FOR BIS
5.1(Resistance to Internal Hydrostatk Pressure)	-	1500	25 % DISCOUNT FOR BIS
5.2(Resistance to Internal Hydrostatk Pressure at Elevated Temperatures)	-	3750	25 % DISCOUNT FOR BIS
5.3(Pressure Drop vs Flow)	-	2500	25 % DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
-

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

2062.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(General Requirements)	-	300	25% DISCOUNT FOR BIS
Cl 6 & Table 1,2 or 3(Reference Number.)	-	250	25% DISCOUNT FOR BIS
Cl 6 & Table 1,2 or 3(Linear Density)	-	1100	25% DISCOUNT FOR BIS
Cl 6 & Table 1,2 or 3(Breaking Force)	-	1100	25% DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
-

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

upto 200mm

107513 View breakup
Rs.107513/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 7(Dimensions Of Pipes)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 8(Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.1(Hydraulic Characteristics)	-	18400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.2(Fusion Compatibility)	-	4800	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.3(Reversion Test )	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.4 & Annex B(Impact Strength)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.5(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.6(Melt Flow Rate)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	1625	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9.9(Opacity)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

upto 150mm

146569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.1 Annex B(Chloride Content of Resin)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.1 Annex B(Chloride content)	-	4300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1125	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.3 (Effective length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8(Pipe Ends)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2 IS 12235 (Part 3)(Opacity)	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.6 IS 12235(Part 14)(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
10.4 IS 12235(Part 19)(Flattening Test)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

upto 630mm

15900 View breakup
Rs.15000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3 (Length of Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(iv) Length of spigot, l1)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4.1 (e3min=0.75e)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1(Appearance:- )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1(Appearance:- )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Colour )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

upto 630mm

55288 View breakup
Rs.56175/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250	25% DISCOUNT ON TEST CHARGES FOR BIS
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.4(Length of pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1(Hydraulic Charactristics, Annex-A)	-	25100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3(Density, Annex A of IS 7328)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5(Thermal Stability to Oxidation, Annex-D)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7(Tensile yield strength, Annex-J)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7(Elongation at break, Annex-J)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
8.8(Resistance to Weathering, Annex-F)	-	9000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.9(Squeeze off, Annex-G)	-	6350	25% DISCOUNT ON TEST CHARGES FOR BIS
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2(Reversion Test. Annex-C)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

upto 160mm

8131 View breakup
Rs.8131/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
4(Size Designation)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5(Colour of fittings)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1,Table 1(Wall thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 ,Table 2&3(Socket Dimensions)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Dimensions of waste trap(Nahani Trap)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8(Sealing Rings)	-	375	25% DISCOUNT ON TEST CHARGES FOR BIS
11.2(Socket and spigot configeration)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
11.4,Table 5(Vent cowl)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
11.5,Table 6(Pipe Clips)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
10(Workmanship)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
12.1(Visual appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
11.1(Solvent cement type or Rubber ring type)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
12.2(Stress relief test)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
12.3(Vicat softening tempewrature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.15, Annex B(Sulphated Ash Content)	-	950	25% DISCOUNT ON TEST CHARGES FOR BIS
16.1(Impact test)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
17(Watet tightness of joint)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

29099 View breakup
Rs.33599/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Types)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 5(Construction)	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.1(Workmanship)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2(Substance)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.3(Accelerated ageing test)	-	4200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.4(water proofness test)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.5(Strenght of joints/seams)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.6(Flex test)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 7.1(Eyelets and rope lashing)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-LN Light, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-MN Medium, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-HN Heavy, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XHN Extra heavy, Ref. IS 7016(Part 1))	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (b)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XHN Extra Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- HN heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XLN Extra light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- LN light)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- MN Medium)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- HN Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XHN Extra Heavy)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Table1 - v)(Dart Impact Strength)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	10180	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 14605 (1998)

Irrigation equipment - Micro sprayers - Specification

9563 View breakup
Rs.9563/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Materials)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.2(Construction and workmanship)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 5.3(Threaded connections)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 7.1(Resistance of threaded connections)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 7.2(Resistance to hydrostatic pressure at ambient temperature)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.2(Uniformity of flow rate)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.3(Performance characteristics)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.4.2(Water distribution curves)	-	1500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.4.3(Diameter of coverage)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 8.4.4(Spray coverage patters)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 9(Durability test)	-	6250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
0.0

IS 14483 : Part 1 (1997)

Fertilizer and chemical injecfion system: Part 1 venturi injector

6375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONSTRUCTIONAL REQUIREMENTS)	-	500	25% DISCOUNT FOR BIS
4.2(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.3(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.4(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.5(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
4.6(CONSTRUCTIONAL REQUIREMENTS)	-	0	25% DISCOUNT FOR BIS
5.1(Resistance of Venturi Injector to Internal Hydrostatic Pressure)	-	1000	25% DISCOUNT FOR BIS
5.2(Performance Test)	-	7000	25% DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

upto 1000mm

8681 View breakup
Rs.8681/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	0	25 % DISCOUNT FOR BIS
3(Designation)	-	0	25 % DISCOUNT FOR BIS
4(Colour)	-	300	25 % DISCOUNT FOR BIS
6(Dimensions of pipes)	-	250	25 % DISCOUNT FOR BIS
7(Visual Appearance)	-	300	25 % DISCOUNT FOR BIS
8.1(Hydraulic characteristics)	-	6400	25 % DISCOUNT FOR BIS
8.2(Reversion)	-	700	25 % DISCOUNT FOR BIS
8.3(Density)	-	500	25 % DISCOUNT FOR BIS
8.4(Melt Flow Rate)	-	1100	25 % DISCOUNT FOR BIS
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % DISCOUNT FOR BIS
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	25 % DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

8038 View breakup
Rs.8038/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
4.7(Vinyl Chloride Polymer content - Annex A)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
4.9 and 6.1(Viscosity)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

upto 200mm

35069 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(QUICK COUPLED PIPES)	-	19175	TEST CHARGES AS PER PART 1 25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 (b)(HDPE couplers —)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 (a)( Quick Coupled Male and Female Couplers)	-	2200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1850	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 .1.2.1(HDPE couplers)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1 .3(Workmanship and Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.4(a)(Holding Attachments for Coupler Parts)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.5(Rubber Ring)	-	6300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.1, 6.1.1.1(Leakage Test)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3, 6.1.3.1(Weldability Test)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1.3.1.1(Weldability Test)	-	4800	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

upto 200mm

17563 View breakup
Rs.14519/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1625	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 table -1(DIMENSIONS OF PIPES)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2(Ovality)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(VISUAL APPEARANCE)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 Table -2(Hydraulic Characteristics)	-	6400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Reversion Test)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4table-2(Fusion Compatibility Test)	-	6400	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Tensile Test)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
7.6(Melt now Rate (MFR))	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

upto 315mm

13550 View breakup
Rs.12400/-(Type A Natural Weathering) Rs 34200 /- (Type A Weatherometer Xenon Arc * Optional) ) Rs.12725/-(Type B Natural Weathering) Rs 34525 /- (Type B Weatherometer Xenon Arc * Optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

upto 25 mm

12194 View breakup
Rs.9056/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1050	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2.2(Fittings)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.3(General)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.1(Wall Thickness ofEmitting Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.2(Inside Diameter ofEmitting Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.3(Flow Paths in Emitting Unit)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.3.4(Spacing ofEmitter Units)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5(Resistance to Tension at Elevated Temperature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.5(Resistance to Tension at Elevated Temperature)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
8.8(Determination of Emitting Unit Exponent)	-	600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1125	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

3525 View breakup
Rs.3525/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
7.2(Flow path in emitters)	-	300	25% DISCOUNT FOR BIS
7.3.1(Resistance to Hydrostatic pressure)	-	1000	25% DISCOUNT FOR BIS
7.3.2(Resistance to Hydrostatic pressure)	-	1000	25% DISCOUNT FOR BIS
7.3.3(Resistance to Hydrostatic pressure)	-	1000	25% DISCOUNT FOR BIS
7.4.1(Emitter Pull Out In-line emitters)	-	500	25% DISCOUNT FOR BIS
7.4.2(Emitter Pull Out On-line emitters)	-	500	25% DISCOUNT FOR BIS
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000	25% DISCOUNT FOR BIS
8.3(Determination of Emitter Exponent)	-	600	25% DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

17456 View breakup
Rs.17456/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades & Types)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 6(Manufacture)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 7(Finish)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 8(Dimensions & Tolerances)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.2(Test For Density)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.3(Test For Moisture Content)	-	1200	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.4(For Water AbsorptionTest )	-	1700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.5(For Swelling in water Test )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	6500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.9(Test For Screw Withdrawal Strength)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	875	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.12 & Annex E( Test For Crack Resistance)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

upto 4000 mm

11369 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(COLOUR)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3.1(No.of Ribs)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3.2(Rib height)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4(Sealing rings - Hardness)	-	375	25% DISCOUNT ON TEST CHARGES FOR BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1(Visual Appearance)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2(Internal Diameter)	-	350	25% DISCOUNT ON TEST CHARGES FOR BIS
9.3(Density IS 12235 (Part 14))	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
9.5(Tensile Strength IS 12235(Part 13))	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

upto 32 mm

7431 View breakup
Rs.7431/- Raw Material – Rs 5181 /-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	25% DISCOUNT FOR BIS
4.1.c.ii (Toluene extract - Annex A)	-	1100	25% DISCOUNT FOR BIS
4.1.c.iii (Volatile matter - Annex B )	-	700	25% DISCOUNT FOR BIS
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	25% DISCOUNT FOR BIS
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25% DISCOUNT FOR BIS
7.3(Tensile Test)	-	1100	25% DISCOUNT FOR BIS
7.3(Elongation at Break)	-	1100	25% DISCOUNT FOR BIS
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25% DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 12785 (1994)

Irrigation equipment - Strainer - Type filters - Specification (first revision)

8438 View breakup
Rs.8438/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.4(General)	-	500	25% DISCOUNT FOR BIS
4.2.1(Strainer Housing)	-	500	25% DISCOUNT FOR BIS
4.3.1(Connections IS 2643 : 1975.)	-	500	25% DISCOUNT FOR BIS
6.1(MECHANiCAL TESTS)	-	1500	25% DISCOUNT FOR BIS
6.2(MECHANiCAL TESTS )	-	3750	25% DISCOUNT FOR BIS
6.3(MECHANiCAL TESTS )	-	1000	25% DISCOUNT FOR BIS
6.4(MECHANiCAL TESTS )	-	1000	25% DISCOUNT FOR BIS
6.5(MECHANiCAL TESTS )	-	2500	25% DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

upto 20000 lit

13850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	25% DISCOUNT ON TEST CHARGES FOR BIS
4.2.3(Carbon Dispersion Test)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
5(Types and Features )	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Finish)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1(Resistance to Deformation)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2(Resistance to Deformation)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Resistance to Impact)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Test for Top Load Resistance)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4(Tensile Strength)	-	1350	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(Flexural Modulus)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
7.6(overall Migration)	-	2300	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 12232 : Part 1 (1996)

Irrigation equipment - Rotating sprinkler: Part 1 design and operational requirements (First Revision)

15900 View breakup
Rs.15900/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	1350	25% DISCOUNT FOR BIS
4.1(Materials)	-	1350	25% DISCOUNT FOR BIS
4.2.1(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
4.2.2(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
4.2.3(Construction and workmanship)	-	300	25% DISCOUNT FOR BIS
4.3(Threaded connections ISO 7-1.)	-	400	25% DISCOUNT FOR BIS
4.4.1(Effective pressures)	-	400	25% DISCOUNT FOR BIS
4.4.2(Actuating mechanism)	-	400	25% DISCOUNT FOR BIS
6.1(Test of construction and parts)	-	300	25% DISCOUNT FOR BIS
6.2.1(Threaded connections to riser)	-	400	25% DISCOUNT FOR BIS
6.2.2(Nozzle threads intended for threaded connection)	-	400	25% DISCOUNT FOR BIS
6.3(Test of resistance to hydrostatic pressure at ambient temperature)	-	850	25% DISCOUNT FOR BIS
6.4(Test of resistance to hydrostatic pressure at high temperature)	-	1600	25% DISCOUNT FOR BIS
6.5.1 a(Watertightness of sprinkler - flowrate < 250 Iih)	-	400	25% DISCOUNT FOR BIS
6.5.1 b(Watertightness of sprinkler - flowrate ≥ 250 I/h,)	-	400	25% DISCOUNT FOR BIS
6.5.2(Watertightness of nozzle connection)	-	400	25% DISCOUNT FOR BIS
7.1(Test of uniformity of rotation speed)	-	400	25% DISCOUNT FOR BIS
7.2(Test of uniformity of ftowrate )	-	400	25% DISCOUNT FOR BIS
7.3(Test of distribution characteristics)	-	1900	25% DISCOUNT FOR BIS
7.4(Test of effective diameter of coverage)	-	400	25% DISCOUNT FOR BIS
7.5(Test of trajectory height (for sprinklers with low trajectory angle))	-	400	25% DISCOUNT FOR BIS
7.6(Test of range of effective pressure)	-	400	25% DISCOUNT FOR BIS
8.1 and 6.1(Durability tests)	-	6550	25% DISCOUNT FOR BIS
8.2 and 6.3(Durability tests)	-	850	25% DISCOUNT FOR BIS
8.3 and 6.5.1(Durability tests)	-	400	25% DISCOUNT FOR BIS
8.4(Durability tests)	-	400	25% DISCOUNT FOR BIS
8.5(Durability tests)	-	400	25% DISCOUNT FOR BIS
8.6(Durability tests)	-	1500	25% DISCOUNT FOR BIS

Complete

23 Feb, 2024

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

upto 630 mm

1500 View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1, Table-1, Fig-1(Nominal size)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2.1, Table-1, Fig-1(B)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 3.2.2, and Fig. 2(Nominal size)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 3.2.2, and Fig. 2.(B)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

upto 630mm

4519 View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Size of fitting)	-	0	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	25% DISCOUNT ON TEST CHARGES FOR BIS
5.1 Table-1 Fig.1(Dimension of Socket length)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
3(Material)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
(VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

UP TO 63MM

7425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.1 Table-2(Length of Socket end)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.1.2(Maximum and minimum outside diameter of conduit)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(Minimum inside diameter of conduit)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(Length of conduit)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
7.4(Unifomity of The wall Thickness)	-	250	25% DISCOUNT ON TEST CHARGES FOR BIS
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	25% DISCOUNT ON TEST CHARGES FOR BIS
10(Resistance to Heat -Ball presure test)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	25% DISCOUNT ON TEST CHARGES FOR BIS
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1400	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
-

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

upto 315mm

4219 View breakup
Rs.4219/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	3000	25% DISCOUNT ON TEST CHARGES FOR BIS

Complete

23 Feb, 2024

-
VCM content test sub-contracted to NABL accredited CIPET labs. Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021

Bureau of Indian Standards

The National Standards Body of India

CIPET, Hyderabad

IDA Phase II, Cherlapally, Hyderabad, Medchal Malkajgiri, Telangana, 500051

9959333415 [email protected]

Scope List