BIS - LIMS (Laboratory Information Management System)

CIPET, Bhubaneswar

B/25, C.N.I complex, Patia, Bhubaneswar, BHUBANESWAR, Khordha, Odisha, 751024

7566177001 [email protected]

Scope List

Reset

72 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 12785 (1994)

Irrigation equipment - Strainer - Type filters - Specification (first revision)

Irrigation equipment(stainer type filters)

11250 View breakup
Rs.11250/- (For BIS: Rs.8438/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Zinc Coating - IS 4736)	-	0	nil
4.1.1(General - Thickness of powder coating IS 5116.)	-	0	nil
4.3.3(Connections)	-	500.00	nil
4.1.2(General)	-	500.00	nil
6.1(MECHANiCAL TESTS)	-	1500.00	nil
6.2(MECHANiCAL TESTS )	-	3750.00	nil
6.5(MECHANiCAL TESTS )	-	2500.00	nil
6.3(MECHANiCAL TESTS )	-	1000.00	nil
6.4(MECHANiCAL TESTS )	-	1000.00	nil
4.2.1(Strainer Housing)	-	500.00	nil
4.3.1(Connections IS 2643 : 1975.)	-	0	nil
4.3.2(Connections IS 6418 : 1971)	-	0	nil

Complete

31 Dec, 2023

-
0.0

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Rotational moulded polyethylene water storage Tank

12525 View breakup
• Above 1500 litres: Rs.18050/- (For BIS: Rs.13850/-) • Up to 1500 litres: Rs.17150/- (For BIS: Rs.13175/-) • For Raw material: Rs.3850/- (For BIS: Rs.3044/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925.00	nil
4.2.3(Carbon Dispersion Test)	-	700.00	nil
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3050	ALL TYPE DIMENSION
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	nil
7.1.1(Resistance to Deformation)	-	700.00	nil
7.2(Resistance to Impact)	-	1100.00	nil
7.3(Test for Top Load Resistance)	-	900.00	nil
7.4(Tensile Strength)	-	1350.00	nil
7.5(Flexural Modulus)	-	1600	nil
7.6(overall Migration)	-	2200.00	nil

Complete

31 Dec, 2023

-
0.0

IS 12232 : Part 1 (1996)

Irrigation equipment - Rotating sprinkler: Part 1 design and operational requirements (First Revision)

Design and operational Requirement

17750 View breakup
Rs.21200/- (For BIS: Rs.15900/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4.1(Effective pressures)	-	400.00	nil
4.4.2(Actuating mechanism)	-	400.00	nil
6.2.1(Threaded connections to riser)	-	400.00	nil
6.2.2(Nozzle threads intended for threaded connection)	-	400.00	nil
6.3(Test of resistance to hydrostatic pressure at ambient temperature)	-	850.00	nil
6.4(Test of resistance to hydrostatic pressure at high temperature)	-	1600.00	nil
6.5.2(Watertightness of nozzle connection)	-	400.00	nil
7.1(Test of uniformity of rotation speed)	-	400.00	nil
7.2(Test of uniformity of ftowrate )	-	400.00	nil
7.3(Test of distribution characteristics)	-	1500.00	nil
7.4(Test of effective diameter of coverage)	-	400.00	nil
7.5(Test of trajectory height (for sprinklers with low trajectory angle))	-	400.00	nil
7.6(Test of range of effective pressure)	-	400.00	nil
8.1 and 6.1(Durability tests)	-	6250.00	nil
8.5(Durability tests)	-	400.00	nil
8.2 and 6.3(Durability tests)	-	850.00	nil
8.3 and 6.5.1(Durability tests)	-	400.00	nil
8.4(Durability tests)	-	400.00	nil
8.6(Durability tests)	-	1500.00	nil

Complete

31 Dec, 2023

-
0.0

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

specific requirement for socket

4450 View breakup
Rs.2475/- (For BIS: Rs.1931/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	3000.00	nil
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	NIL
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	nil
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	nil
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	nil
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	0	nil
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	950.00	nil
3.2.1, Table-1, Fig-1(Nominal size)	-	500	nil
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	nil
3.2.1, Table-1, Fig-1(Plumbing)	-	0	nil
Clause 3.2.2, and Fig. 2(Nominal size)	-	0	nil
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	nil
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	0	nil

Complete

31 Dec, 2023

-
0.0

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

General Requirement

2475 View breakup
Rs.2475/- (For BIS: Rs.1931/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	0	nil
4(Size of fitting)	-	0	nil
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	nil
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	nil
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	nil
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	nil
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575.00	nil
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	1400.00	SPECIMEN PREPARATION-300/-

Complete

31 Dec, 2023

-
0.0

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

specific requirement for 90 degree tees

3500 View breakup
Rs.5625/- (For BIS: Rs.4219/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	500.00	Nil
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000.00	Nil
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	2125	OPACITY-575/- STRESS RELIEF TEST-700/- HYDRAULIC TEST-850/-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	0	Nil
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	0	Nil

Complete

31 Dec, 2023

-
0.0

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

General requirement

5625 View breakup
Rs.5625/- (For BIS: Rs.4219/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	nil
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	nil
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	nil
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	nil
Cl. 6.1(Stress Relief Test- Appendix A)	-	700.00	nil
Cl. 6.2(Opacity- Appendix B)	-	575.00	nil
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000.00	nil
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	nil
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	nil
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	nil
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850.00	nil

Complete

31 Dec, 2023

-
0.0

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

Fiber Rope Popypropylene Split film

1600 View breakup
Rs.5200/- (For BIS: Rs.3900/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	NIL
Cl 5(General Requirements)	-	0	NIL
Cl 6 & Table 1,2 or 3(Reference Number.)	-	0	nil
Cl 6 & Table 1,2 or 3(Linear Density)	-	500	nil
Cl 6 & Table 1,2 or 3(Breaking Force)	-	1100.00	nil

Complete

31 Dec, 2023

-
0.0

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

1-plain ended pipe/socket ended pipe

24475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1400.00	specimen preparation 300/-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850.00	nil
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850.00	nil
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000.00	nil
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850.00	nil
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	nil
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500.00	nil
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100.00	nil
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900.00	specimen preparation 200/-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575.00	nil
8(SEALING RINGS)	-	0	nil
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	500	nil
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	nil
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	nil
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	nil
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	nil
7.2.1(DIMENSIONS-Socket)	-	0	nil
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	nil
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	nil
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	nil
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	nil
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	nil
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	nil
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	nil
Clause 10.7(Sulphated Ash Content)	-	950.00	nil
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	nil
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	nil
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300.00	nil
9.1(PIPE ENDS)	-	0	nil

Complete

31 Dec, 2023

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

1-PE Pipe, 2-Resin,3-master batch,4-carbon black powder

45500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Slow Crack Growth Rate)	-	6000	specimen preparation 500/-
8.9 table-6(Elongation at Break)	-	1600.00	specimen preparation 500/-
8.8(Tensile Strength for Butt-fusion)	-	1600.00	specimen preparation 500/-
8.7(Density)	-	500.00	nil
8.5 (Oxidation Induction Time)	-	2200.00	nil
8.4( Melt Flow Rate)	-	1100.00	nil
8.2(Longitudinal Reversion Test)	-	900.00	specimen preparation 200/-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	4000.00	for 100hr
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	17650.00	for 48hrs.-1600/- for 165hrs.-4800/- for 1000hrs.-11250/-
7.4.1.2(Ovality)	-	0	nil
7.4 table -3 & 4(6.1 Dimensions)	-	750.00	nil
7.2(Length)	-	0	NIL
6.2.1(6.1.1 Identification Stripes)	-	250.00	nil
8.6(Overall migration)	-	2000.00	specimen preparation 300/-
8.3(Carbon black)	-	1625	CBC & CBD
5.2(Polyethylene Resin)	-	5325.00	Base Density, Melt flow Rate,Overall migration, Volatile & water content
5, 5.1 table-1(MATERIALS)	-	0	NIL

Complete

31 Dec, 2023

-
-

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

1-Unbacked PVC flooring ,2-PVC tiles

17713.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(DIMENSIONS AND TOLERANCES-Liaear Dimension-Sheets or Rolls)	-	200.00	NIL
5.1.2(DIMENSIONS AND TOLERANCES-Liaear Dimension-Tiles)	-	0	NIL
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	200.00	NIL
6. 1(COLOUR AND SURFACE CHARACTERISTICS)	-	250.00	NIL
7.1-Table 1(i)(REQUlREMENTS-Thickness Variation )	-	200.00	NIL
7.1-Table 1(ii)(REQUlREMENTS-Width of sheet or roll )	-	250.00	NIL
7.1-Table 1(iii)(REQUlREMENTS-rile size )	-	0	NIL
7.1-Table 1(iv)(REQUlREMENTS-Squareness )	-	250.00	NIL
7.1-Table 1(vi)(REQUlREMENTS-Curling )	-	250.00	NIL
7.1-Table 1(vii)(REQUlREMENTS-Residual indenration )	-	1400.00	NIL
7.1-Table 1(viii)(REQUlREMENTS-Flexibility )	-	1500.00	NIL
7.1-Table 1(ix)(REQUlREMENTS-Resistance to various substances-Scratch width )	-	1300.00	NIL
7.1-Table 1(x)(REQUlREMENTS-Resistance to various substances )	-	0	NIL
7.1-Table 1(xi)(REQUlREMENTS-Ply adhesion )	-	1350.00	NIL
7.1-Table 1(xii)(REQUlREMENTS-Moisture movernent )	-	700.00	NIL
7.1-Table 1(xiii)(REQUlREMENTS-Heat ageing and exudation )	-	10100.00	NIL
7.1-Table 1(xiii)(REQUlREMENTS-Elastic product)	-	1350.00	NIL
8.1.1-8.2.1(Tests-Typt Tests)	-	0	NIL
8.1.2-8.2.2(Tests-Acceptance Tests)	-	0	NIL
8.1.3-8.2.3(Tests-RoutineTests)	-	0	NIL

Complete

31 Dec, 2023

-
-

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Type-I,II,III,IV

28400 View breakup
Natural comp Type-1 Rs.15950/-(For BIS; Rs 13075) • (Natural comp Type 2)- Rs 14,200/- (For BIS Rs 11700/-) • (Natural comp Type 3&4)- Rs 9150/- (For BIS Rs. 6925/-) • Black compound Type-1)- Rs 17425/- (For BIS Rs. 14181/-) • (Black compound Type-2)- Rs 15675/- (For BIS Rs. 12806) • (Black compound Type-3&4)- Rs 10375/- ( For BIS Rs. 7844)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500.00	nil
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100.00	nil
5.1.6a(Carbon Black Content, Annex-A)	-	925.00	nil
5.1.6b(Ash Content, Annex-A)	-	950.00	nil
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700.00	nil
5.2.2(Tolerance on Thickness, Annex-A)	-	500.00	nil
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350.00	nil
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100.00	nil
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300.00	nil
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	nil
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	nil
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000.00	nil
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000.00	nil
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750.00	nil
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	0	nil
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	0	nil
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	nil
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	nil
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	nil
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	0	nil
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350.00	nil
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
8.1, Table 3(Tear resistance , Annex B)	-	1000.00	nil
8.1, Table 3(Puncture resistance , Annex C)	-	1100.00	nil
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	nil
9.1, Table 4(Tear resistance , Annex B)	-	1000.00	nil
9.1, Table 4(Puncture resistance , Annex C)	-	1100.00	nil
5.1.1(Appearance)	-	300.00	nil
5.1.2(Film Form)	-	0	nil
5.1.3(Odour)	-	0	nil

Complete

31 Dec, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

CIPET, Bhubaneswar

B/25, C.N.I complex, Patia, Bhubaneswar, BHUBANESWAR, Khordha, Odisha, 751024

7566177001 [email protected]

Scope List