BIS - LIMS (Laboratory Information Management System)

CIPET, Bhubaneswar

B/25, C.N.I complex, Patia, Bhubaneswar, BHUBANESWAR, Khordha, Odisha, 751024

7566177001 [email protected]

Scope List

Reset

72 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

5625.00 View breakup
Rs.5625/- (For BIS: Rs.4219/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	0	nil
table 1 sl.no: 02(20 )	-	0	nil
table 1 sl.no: 03(25 )	-	0	nil
table 1 sl.no: 04(32 )	-	0	nil
table 1 sl.no: 05(40 )	-	0	nil
table 1 sl.no: 06(50 )	-	0	nil
table 1 sl.no: 07(63 )	-	0	nil
2.1(General)	-	0	nil
2.2(Manufacture)	-	0	nil
2.2.2, Table 1(Size)	-	500.00	nil
2.2.2, Table 1(Union Laying Length)	-	0	nil
2.2.3( inside diameter of the socket)	-	0	nil
2.2.3(Socket length)	-	0	nil

Complete

31 Dec, 2023

-
-

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

requirement for Cap

5625.00 View breakup
Rs.5625/- (For BIS: Rs.4219/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	0	nil
2.2(Manufacture)	-	0	nil
2.2.2(diameter of the socket of cap)	-	500.00	nil
2.1(General)	-	0	nil
2.2(Manufacture)	-	0	nil
2.2.2(diameter of the socket of cap)	-	0	nil

Complete

31 Dec, 2023

-
-

IS 10840 (1994)

Blow moulded hdpe containers for packing of vanaspati - Specification (Second Revision)

6300.00 View breakup
• Rs.6300/- (For BIS: Rs.4725/-) • For Raw material (Optional): Rs.9550/- (For BIS: Rs.7475/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	0	nil
4.2(Manufacture)	-	0	nil
4.3(Capacity)	-	250.00	nil
4.4(Mass)	-	250.00	nil
4.5(Shape and Dimensions)	-	250.00	nil
4.6(Wall Thickness)	-	250.00	nil
4.7.1(Closure Leakage test)	-	400.00	nil
4.7.2(Drop impact test)	-	1100.00	nil
4.7.3(Stacking test)	-	900.00	nil
4.7.4(Handle Pull Test)	-	400.00	nil
4.7.5(Ink adhesion for printed containers)	-	500.00	nil
4.7.6(Product Resistance of printed containers)	-	500.00	nil
4.7.7(Migration test)	-	1200.00	nil

Complete

31 Dec, 2023

-
-

IS 12232 : Part 2 (1995)

Irrigation equipment - Rotating sprinkler: Part 2 test method for uniformity of distribution (First Revision)

- View breakup
Rs.21200/- (For BIS: Rs.15900/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2023

-
-

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

Medicle Textile coverall for COVID-19

6000.00 View breakup
Rs 4875/- BIS charges ( Rs 3075/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Manufacture - IS 17423)	-	0	nil
5.1(Workmanship and Finish - IS 17423)	-	500.00	nil
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	5500.00	nil
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-	0	nil
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-	0	nil
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-	0	nil
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-	0	nil

Complete

31 Dec, 2023

-
0.0

IS 8521 : Part 1 (1977)

Specification for industrial safety face shields: Part 1 with plastics visor

Industrial safety faceshield

9200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3(General requirements & Specific requirements)	-	500		nil
Cl 4(Visual and Dimensional Examination & Physical Requirements (Impact Resistance, Penetration Resistance, Visible Transmittance, Flammability & Disinfection))	-	8700.00		nil

Complete

31 Dec, 2023

-
-

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

Surgical Rubber gloves

15400.00 View breakup
Rs 13925 (BIS charges Rs 3925/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	0	nil
4.2(Dimensions Fig 1 and Table 1)	-	500.00	nil
4.3(Thickness)	-	250.00	nil
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	7350.00	INCLUDING TENSILE STRENGTH(AFTER AGEING) -1350/-
4.4.3(After heat ageing in autoclave)	-	5200.00	INCLUDING TENSILE STRENGTH(BEFORE AGEING) -1350/- INCLUDING TENSILE STRENGTH(AFTER AGEING) -1350/-
4.4.4(Tension Set)	-	1350.00	SAMPLE PREPARATION -250/-
4.5(pH of Aqueous Extract )	-	750.00	nil

Complete

31 Dec, 2023

-
0.0

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

Single use medical examination gloves

8150.00 View breakup
Rs 8950/- (BIS charges 12640/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 & Table 2(Width corresponding to size code (dimension w,Figure 1))	-	0	nil
6.1 & Table 2(Descriptive size)	-	0	nil
6.1 & Table 2(Minimum length (dimension l, Figure 1))	-	500.00	nil
6.1 & Table 2(Minimum thickness (at locations shown in Figure 2))	-	0	nil
6.1 & Table 2(Maximum thickness (at approximate centre of palm))	-	0	nil
6.3.2 & Table 3(Minimum force at break before accelerated ageing)	-	1350.00	nil
6.3.3 & Table 3(Minimum force at break after accelerated ageing)	-	5300.00	nil
6.3.3 & Table 3(Minimum Elongation at break after accelerated ageing)	-	1100.00	nil
6.2(Watertightness)	-	1000.00	NIL

Complete

31 Dec, 2023

-
0.0

IS 13422 (1992)

Disposable surgical rubber gloves specification

Surgical Rubber gloves

7050.00 View breakup
Rs 10388/- (BIS charges – Rs 6900/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(TYPES)	-	0	nil
5.2.1(General Characteristics and Dimensions)	-	500.00	nil
5.2.2 and Table 1 Fig. 1(Dimensions - Length)	-	0	nil
5.2.2 and Table 1 Fig. 1(Dimensions - Width)	-	0	nil
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Finger)	-	0	nil
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Palm)	-	0	nil
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Cuff)	-	0	nil
5.3 and Table 2( Tensile Strength Before Ageing)	-	1350.00	nil
5.3 and Table 2( Elongation at Break Before Ageing)	-	0	nil
5.3 and Table 2(Stress at 500% Elongation at Break Before Ageing)	-	0	nil
5.3 and Table 2( Tensile StrengthAfter Accelerated Ageing)	-	4200.00	nil
5.3 and Table 2( Elongation at Break After Accelerated Ageing)	-	0	nil
5.5(Airtight Test)	-	1000.00	nil

Complete

31 Dec, 2023

-
0.0

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

162000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100.00	nil
Table -1 Cl. No. 5.1, i)(Base Density)	-	500.00	nil
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100.00	nil
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200.00	nil
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100.00	nil
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800.00	nil
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000.00	nil
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100.00	nil
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	250.00	nil
6.3.2(Length of Pipe)	-	250.00	nil
8.1.1 Table-10 (iv)(Creep ratio)	-	26300.00	nil
6.3.3(Out Side Diameter)	-	250.00	nil
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	1100.00	nil
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	250.00	nil
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	1000.00	nil
6.3.5.2(Wall Thickness(e4 min))	-	250.00	nil
9 Table 12 (ii)(Water tightness)	-	1000.00	nil
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	250.00	nil
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	39000.00	nil
7.1(Appearance)	-	300.00	nil
7.1.1(Color of Finished Pipes)	-	300.00	nil
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1100.00	nil

Complete

31 Dec, 2023

-
-

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

HDPE/PP woven sack for food grain packing

19730 View breakup
Rs.19480/- (For BIS: Rs.17155/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	nil
4.1(Raw Material)	-	1050.00	nil
4.2(Tapes – Width IS 6192 and IS 11197)	-	250.00	nil
4.2(Tapes – Linear Density )	-	250.00	nil
4.2(Construction)	-	0	nil
4.3(Sacks)	-	300	VISUAL APPEARANCE
4.3.1(Bottom Seam)	-	0	nil
4.3.1( The two rows of stitches shall be separated from each other)	-	0	nil
4.3.1( The outer stitch)	-	0	nil
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	nil
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	nil
4.3.1(The number of stitches/dm)	-	0	nil
4.3.2(Mouth)	-	0	nil
4.4 and Table 1 i(Capacity)	-	250	nil
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250.00	nil
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	nil
5.2 and Table 1 iii(Ends per dm )	-	250.00	nil
5.2 and Table 1 iv(Picks per dm )	-	250.00	nil
5.1 and Table 1 v(Mass of sack )	-	250.00	nil
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	nil
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100.00	nil
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100.00	nil
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	nil
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	nil
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	EXPOSING CHARGES -10180
5.2 and Table 1 x(Ash content )	-	950	nil

Complete

31 Dec, 2023

-
0.0

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

46000 View breakup
Rs.92830/- (For BIS: Rs.78055/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250.00	nil
5.1(MANUFACTURE- IS 15907)	-	0	nil
5.2.1(Lamination- IS 15907)	-	2000.00	IDENTIFICATION
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	250.00	nil
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250.00	nil
5.3.1(Construction- IS 15907)	-	300	nil
5.3.1(The width of the hem - IS 15907)	-	250.00	nil
5.3.2(Finished width of pocket - IS 15907)	-	250.00	nil
5.4(Bonding- IS 15907)	-	300.00	nil
6- Table 1- SL.No (i)(Mass)	-	250.00	nil
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1350.00	nil
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1100.00	nil
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	0	nil
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	2200	nil
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1350	nil
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1100	nil
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1350.00	nil
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1100.00	nil
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1100.00	nil
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1450.00	nil
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2250.00	nil
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	19000	nil
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1350.00	nil
6.1(Length -IS 15907)	-	250.00	nil
6.1(Width - IS 15907)	-	250.00	nil
6.1(Height - IS 15907)	-	250.00	nil
6.2(Water Proofness,IS 7941)	-	5450.00	Ageing Test charge 4200/- Specimen preparation 250/-
6.2(Water Proofness, IS 7940)	-	1000.00	nil

Complete

31 Dec, 2023

-
0.0

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

HDPE onen geomembrane

193025 View breakup
Rs.197575/- (For BIS: Rs.192306/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	1050.00	nil
3.2(HDPE Fabric)	-	1050.00	nil
5(MANUFACTURE)	-	0	nil
5.1(Lamination)	-	0	nil
5.2(Panel Width)	-	0	nil
5.3(Joints/Seams)	-	0	nil
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	250.00	nil
5.1.1 and 6.2(Mass, g/sq m)	-	250.00	nil
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	250.00	nil
5.1.1 and 6.2(Length)	-	0	nil
5.1.1 and 6.2(Width)	-	0	nil
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925.00	nil
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	1100.00	nil
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	nil
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100.00	nil
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	1100.00	nil
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	176500.00	nil
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100.00	nil
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1100.00	nil
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1100.00	nil
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000.00	nil
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	1100.00	nil
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	1100.00	nil
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1000.00	nil
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	1000.00	nil
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	950.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

HDPE/PP bags for sugar packing

20730 View breakup
Rs.19630/- (For BIS: Rs.17268/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	nil
4.1(Raw Material)	-	1050.00	nil
4.2(Tapes – Width IS 6192 and IS 11197)	-	250.00	nil
4.2(Tapes – Linear Density )	-	500.00	nil
4.2(Construction)	-	0	nil
4.3(Sacks)	-	0	nil
4.3.1(Bottom Seam)	-	250.00	nil
4.3.1(The two rows of stitches shall be separated from each other)	-	0	nil
4.3.1( The outer stitch)	-	0	nil
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	nil
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	nil
4.3.1(stitches/dm)	-	250.00	nil
4.3.2(Mouth)	-	0	nil
4.4(Liner IS 10146 or IS 10910.)	-	0	nil
4.4(Mass of the loose liner )	-	300.00	nil
4.4(Width of the loose liner)	-	0	nil
4.4(Length of the line)	-	0	nil
4.4(Bottom seam of the loose liner)	-	0	nil
4.4.1(Liner)	-	0	nil
4.5 and Table 1 i(Capacity)	-	250	nil
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250.00	nil
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	nil
5.2 and Table 1 iii(Ends per dm )	-	200.00	nil
5.2 and Table 1 iv(Picks per dm )	-	200.00	nil
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	300.00	nil
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	300.00	nil
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100.00	nil
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100.00	nil
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100.00	nil
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	nil
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	nil
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	nil
5.2 and Table 1 x(Ash content )	-	950.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

HDPE/PP woven sack for 50 kg food packing

23580.00 View breakup
Rs.19380/- (For BIS: Rs.17080/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250.00	nil
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500.00	nil
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	250.00	nil
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100.00	nil
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1400.00	nil
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850.00	nil
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400.00	nil
3.2(Unlaminated Fabric Mass )	-	0	nil
3.3.1(Bottom seam (IS 10789))	-	250.00	nil
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	nil
4.2 and Table 1 ii(Dimensions )	-	250.00	nil
5.2 and Table 1 iii(Ends per dm )	-	200.00	nil
5.2 and Table 1 iv(Picks per dm )	-	200.00	nil
4.2 and Table 1 v(Mass of sack )	-	300.00	nil
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200.00	nil
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100.00	nil
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	nil
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380.00	nil
4.2 and Table 1 x(Ash content )	-	950.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

PE pipe for gaseous fuel supply(above 63mm & upto 63mm)

68925 View breakup
Above 63mm: Rs.72775/- (For BIS: Rs.56175/-) Up to 63mm: Rs.58125/- (For BIS: Rs.45125/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300.00	nil
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1125	nil
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100.00	nil
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200.00	nil
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250	nil
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600.00	nil
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	500.00	nil
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	0	nil
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	0	nil
6.4(Length of pipe)	-	0	nil
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	0	nil
8.1(Hydraulic Charactristics, Annex-A)	-	34950	Including Type & Acceptance test
8.2(Reversion Test. Annex-C)	-	700.00	nil
8.3(Density, Annex A of IS 7328)	-	500.00	nil
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100.00	nil
8.5(Thermal Stability to Oxidation, Annex-D)	-	0	nil
8.7(Tensile yield strength, Annex-J)	-	1350.00	nil
8.7(Elongation at break, Annex-J)	-	0	nil
8.8(Resistance to Weathering, Annex-F)	-	9000.00	Natural weathering
8.9(Squeeze off, Annex-G)	-	6350.00	nil
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700.00	nil
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2200	nil

Complete

31 Dec, 2023

-
0.0

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

UPVC fittings

10675.00 View breakup
• For Tee, bend, reducer, coupler, socket plug, cleansing pipe, adaptor: Rs.16075/- (For BIS: Rs.8131/-) • For PVC Resin: Rs.2300/- (For BIS: 1725/-) • For Vent cowl, pipe clip, waste trap: Rs.8950/- (For BIS: Rs.6838/-) • For PVC Compound (Optional): Rs.2300/- (For BIS: Rs.1725/-) • For Sealing ring: Rs. 1425/- (For BIS: Rs.1069/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	300.00	VISUAL
3(Type of Fitting)	-	0	nil
4(Size Designation)	-	0	nil
5(Colour of fittings)	-	300.00	nil
7.1,Table 1(Wall thickness)	-	500	nil
7.2 ,Table 2&3(Socket Dimensions)	-	0	nil
7.3(Dimensions of waste trap(Nahani Trap)	-	0	nil
8(Sealing Rings)	-	375	HARDNESS
10(Workmanship)	-	300.00	nil
11(Design requirements)	-	500.00	nil
11.1(Solvent cement type or Rubber ring type)	-	0	nil
11.2(Socket and spigot configeration)	-	0	nil
11.4,Table 5(Vent cowl)	-	0	nil
11.5,Table 6(Pipe Clips)	-	0	nil
12.1(Visual appearance)	-	0	nil
12.2(Stress relief test)	-	700.00	nil
12.3(Vicat softening tempewrature)	-	1100.00	nil
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500.00	nil
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	nil
Cl.15, Annex B(Sulphated Ash Content)	-	950.00	nil
16.1(Impact test)	-	1100.00	DROP TEST
17(Watet tightness of joint)	-	850.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

Tarpauline(Multilayer cross caminated)

60780 View breakup
Rs.63305/- (For BIS: Rs.52124/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Workmanship)	-	250	nil
Cl. 6.2(Substance)	-	250	nil
Cl. 6.3(Accelerated ageing test)	-	4200.00	nil
Cl. 6.4(water proofness test)	-	1000.00	nil
Cl. 6.5(Strenght of joints/seams)	-	1100.00	nil
Cl. 6.6(Flex test)	-	35000.00	nil
Cl. 6.7(Ease of in-situ Repair)	-	0	nil
Cl. 7.1(Eyelets and rope lashing)	-	0	nil
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-	0	nil
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-LN Light, Ref. IS 7016(Part 1))	-	0	nil
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-MN Medium, Ref. IS 7016(Part 1))	-	0	nil
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	2200	BEFORE AGEING LONGITUDINAL DIRECTION AND TRANSVERSE DIRECTION
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XLN Extra light)	-	2200	NIL
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iii (a)(Elongation at break, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	0	nil
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	2200.00	nil
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	2200	nil
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XLN Extra light)	-	10180	nil

Complete

31 Dec, 2023

-
0.0

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

HDPE pipe for sewerage, Raw material

11475 View breakup
• Rs.11475/- (For BIS: Rs.8681/-) • For Raw material (Natural): Rs.3850/- (For BIS: Rs.3044/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	0	nil
3(Designation)	-	0	nil
4(Colour)	-	300.00	nil
6(Dimensions of pipes)	-	250.00	nil
7(Visual Appearance)	-	300.00	nil
8.1(Hydraulic characteristics)	-	6400.00	nil
8.2(Reversion)	-	1000.00	nil
8.3(Density)	-	500.00	nil
8.4(Melt Flow Rate)	-	1100.00	nil
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925.00	nil
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

34850 View breakup
Rs.38600/- (For BIS: Rs.32288/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	nil
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	nil
5.1(Insulation)	-	300.00	nil
6.1(Flexibility class)	-	0	nil
6.2(Compactness)	-	0	nil
6.2(No of strands)	-	0	nil
6.2(Surface)	-	0	nil
6.3(Protective barrier)	-	0	nil
6.4(size of street lighting conductor)	-	0	nil
6.5(Size of messenger conductor )	-	0	nil
6.6(Direction of outer layer)	-	0	nil
7.1(Insulation)	-	0	nil
7.2( Thickness of insulation)	-	250.00	nil
7.3(Tolerance on thickness of insulation )	-	0	nil
7.4(Aplication of the insulation )	-	0	nil
7.5(Colour of the insulation )	-	300.00	nil
8.1(Core identification)	-	0	nil
8.3(Identification by other means)	-	0	nil
9.1(Assembly (Laying up))	-	0	nil
9.3(Direction of lay)	-	0	nil
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	1350.00	nil
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	900.00	nil
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1100.00	nil
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1100.00	nil
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1350.00	nil
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	0	nil
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	5300.00	nil
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	0	nil
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000.00	nil
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	0	nil
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	850.00	nil
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	0	nil
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	9000.00	nil
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1350.00	nil
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	0	nil
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1100.00	nil
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1100.00	nil
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1200.00	nil
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1100.00	nil
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1100.00	nil
10.1 g)(High voltage test - IS10810:Part 45)	-	1100.00	nil
11.4(Bending Test on the Completed Cable ( Optional) )	-	700.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

HDPE/PP woven sack for sand filling

20150.00 View breakup
Rs.19680/- (For BIS: Rs.17305/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050.00	nil
3.2(Tapes – Width )	-	250.00	nil
3.2(Tapes – Linear Density )	-	500.00	nil
3.3(Tying Cord)	-	250.00	nil
3.4(Sack)	-	250.00	nil
3.4.1(Seam)	-	250.00	nil
4.1 and Table 1 i a(Dimensions Outside Length)	-	250.00	nil
4.1 and Table 1 i b(Dimensions Outside Width)	-	250.00	nil
4.1 and Table 1 iii(Picks per dm )	-	250.00	nil
4.2 and Table 1 iv(Mass of sack )	-	250.00	nil
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100.00	nil
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100.00	nil
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100.00	nil
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	nil
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	nil
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380.00	nil
4.1 and Table 1 ix(Ash content )	-	950.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

Solvent cement

10550.00 View breakup
Rs.10550/- (For BIS: Rs.8038/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, increase)	-	300.00	nil
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	3000.00	Effect on water test.
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	850.00	nil
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	0	nil
4.7(Vinyl Chloride Polymer content - Annex A)	-	1100.00	nil
4.8(Dissolution)	-	400.00	nil
4.9 and 6.1(Viscosity)	-	1100.00	nil
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	1600.00	SAMPLE PREPARATION-500/-
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	1100.00	nil
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	1100.00	nil

Complete

31 Dec, 2023

-
0.0

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

Quick coupled pipe & fitting, Raw material

38725.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300.00	nil
6.2, 6.2.1 (Quick Coupled Fittings)	-	0	nil
6.1.3.2 (Quick coupled fittings)	-	0	nil
6.1.3.1.1(Weldability Test)	-	6400	nil
6.1.2.2( Hydraulic Proof Test)	-	1600	nil
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	4800	nil
6.1.1, 6.1.1.1(Leakage Test)	-	850.00	nil
6.1(Quick Coupled Pipes and Fittings)	-	0	nil
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500.00	nil
5.2(Dimensions of Quick Coupled Pump Connectors Table 3.)	-	500.00	nil
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	250.00	nil
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	250.00	nil
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	250.00	nil
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	250.00	nil
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	250.00	nil
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500.00	nil
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	nil
4.1.5(Rubber Ring)	-	500.00	nil
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	nil
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	nil
4.1 .3(Workmanship and Appearance)	-	300.00	nil
4.1 .1.2.2(HDPE couplers)	-	250.00	nil
4.1 .1.2.1(HDPE couplers)	-	0	nil
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700.00	nil
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925.00	nil
4.1 (b)(HDPE couplers —)	-	0	nil
4.1 (a)( Quick Coupled Male and Female Couplers)	-	250.00	nil
4(QUICK COUPLED FITTINGS)	-	0	nil
3(QUICK COUPLED PIPES)	-	0	nil

Complete

31 Dec, 2023

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

1-PE pipe,2-Raw material

21400 View breakup
• Rs.19175/- (For BIS: Rs.14519/-) • For Raw material: Rs.3850/- (For BIS: Rs.3044/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	0	nil
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100.00	nil
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125	nil
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	nil
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1625	CBC&CBD
5.1 table -1(DIMENSIONS OF PIPES)	-	500.00	nil
5.1.2(Ovality)	-	0	nil
6.1(VISUAL APPEARANCE)	-	300.00	nil
7.1 Table -2(Hydraulic Characteristics)	-	6400.00	nil
7.2(Reversion Test)	-	1000.00	nil
7.3(Tensile Test)	-	1350.00	nil
7.4table-2(Fusion Compatibility Test)	-	6400	nil
7.5(Density)	-	500.00	nil
7.6(Melt now Rate (MFR))	-	1100	nil

Complete

31 Dec, 2023

-
0.0

IS 14106 (2018)

Direct action hand pumps - Specification (First Revision)

Direct Action Hand Pump

27625 View breakup
• Rs.30675/- (For BIS: Rs.23006/-) • For Raw material PVC pipe as per IS:12818:1992: Rs.8700/- (For BIS: Rs.6775/-) • For PVC injection molded fitting as per IS:7834:1:1987: Rs.4525/- (For BIS: Rs.3394/-) • For HDPE Granule as per IS:7328:1992: Rs.6150/- (For BIS: Rs.4894/-) • For Poly Acetal Granules: Rs.8650/- (For BIS: Rs.7550/-) • For Nitrile Rubber Sheet: Rs.2425/- (For BIS: Rs.1881/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Visual tests: All the pumps shall be examined for workmanship, finish and visual defects.)	-	1500.00	nil
6.2.2 (Other tests: All the selected samples shall be checked for,)	-	0	nil
6.2.2 (i) Aligment of groove in top guide bush with respect to the nuts welded on pump body)	-	1500	nil
6.2.2 (ii) Aligment of handle nut with pipe for concentricity)	-	0	nil
6.2.2 (iii) Location of holes in the pump head flange with respect to the direction of the spout)	-	0	nil
6.2.2 (iv) Reasonable flatness of the flanges to provide proper matching of the holes to ensure unrestricted insertion of the bolts )	-	0	nil
6.2.2 (v) Matching of faces indicated in respective figures of piston plate, follower plate and foot valve body)	-	0	nil
6.2.2 (vi) Concentricity of the two internal diameter of the reducing socket)	-	0	nil
6.4(Pump Rod)	-	0	nil
6.4(Riser Pipe)	-	0	nil
6.4(Upper casing and lower casing)	-	0	nil
6.4(Load test )	-	700.00	nil
4.4 & Table 2(Bell Dimensions, mm)	-	0	nil
4.4 & Table 2(a)Socket Depth)	-	0	nil
4.4 & Table 2(b) Mean socket internal dia at mouth)	-	0	nil
4.4 & Table 2(c) Mean socket internal diameter at root )	-	0	nil
4.4 & Table 2(Bell Dimensions for Sand Trap)	-	0	nil
4.4 & Table 2(a)Socket Depth)	-	0	nil
6.2.3(Dimensional tests, Pump head, mm)	-	14500.00	nil
6.2.3(Pump head flange)	-	0	nil
6.2.3(Pump stand)	-	0	nil
6.2.3(Intermediate flange)	-	1300	NIL
6.2.3(Grommet)	-	0	nil
6.2.3(Shore Hardness on Scale A)	-	4125.00	nil
6.2.3(Top Guide Bush)	-	0	nil
6.2.3(Handle Cushion Top)	-	0	nil
6.2.3(Shore Hardness on Scale A)	-	0	nil
6.2.3(Handle Retainer)	-	0	nil
6.2.3(Top Connector)	-	0	nil
6.2.3(Male Adapter)	-	0	nil
6.2.3(Female Adapter)	-	0	nil
6.2.3(Piston Plate)	-	0	nil
6.2.3(Follower Plate)	-	0	nil
6.2.3(Piston Fap Valve)	-	0	nil
6.2.3(Shore Hardness on Scale A)	-	0	nil
6.2.3(Cup Seal)	-	0	nil
6.2.3(Shore Hardness on Scale A)	-	0	nil
6.2.3(Bottom Connector)	-	0	nil
6.2.3(Grapple Parts)	-	0	nil
6.2.3(Foot Valve Body)	-	0	nil
6.2.3(O Ring)	-	0	nil
6.2.3(Shore Hardness on Scale A)	-	0	nil
6.2.3(Flap Valve)	-	0	nil
6.2.3(Foot valve Guide)	-	0	nil
6.2.3(Threaded Coupler(M))	-	0	nil
6.2.3(Threaded Coupler(F))	-	0	nil
6.2.3(Riser Pipe Centralizer)	-	0	nil
6.2.3(Foot Valve Retainer)	-	0	nil
6.2.3(Rubber Seat)	-	0	nil
6.2.3(Reducing Sdocket (Alternate Design))	-	0	nil
6.2.3(Well Screen (alternate))	-	0	nil
6.2.3(Screen Coupler)	-	0	nil
6.2.3(Sand Trap)	-	0	nil
6.2.3(Cutter)	-	0	nil
6.2.3(Plug)	-	0	nil
6.2.3(Retrieving Rod)	-	0	nil
6.2.3(Combination Spanner)	-	0	nil
5.2(a)(Mass of Zinc coating,g/m2)	-	1000.00	nil
4.2(Mean Outside Diameter)	-	250	nil
4.2(Wall Thickness)	-	0	nil
4.2(Length)	-	0	nil
4.2(Threading of Pipe)	-	0	o
4.2(Visual Appearance)	-	300	nil
4.2(Test for Internal Diameter)	-	350	nil
4.2(Specific Gravity)	-	500.00	nil
4.2(Impact Strength at 0º C)	-	1600	nil
4.2(Dimension, mm)	-	0	nil
4.2(Mean Outside Diameter)	-	0	nil
4.2(Wall Thickness)	-	0	nil
4.2(Impact Strength at 0º C)	-	0	nil

Complete

31 Dec, 2023

-
REVISED STANDARD OF IS 14106:2018 INCLUDED.

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

1-Type A ,2-Type B

15750 View breakup
• For Type A: Rs.16000/- (For BIS: Rs.12400/-) • For Type A (Optional/ Alternate): Rs.34300/- (For BIS: Rs.26125/-) • For Type A (PVC Resin): Rs.1100/- (For BIS: Rs.825/-) • For Type B: Rs.16500/- (For BIS: Rs.12725/-) • For Type B (Optional/ Alternate): Rs.34800/- (For BIS: Rs.26450/-) • For Type B (PVC Resin): Rs.1100/- (For BIS: Rs.825/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300.00	nil
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100.00	nil
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500.00	nil
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	nil
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	nil
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	nil
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	nil
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	nil
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300.00	nil
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000.00	nil
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700.00	nil
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100.00	nil
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	nil
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500.00	nil
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400.00	nil
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1350.00	nil
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	0	nil
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	nil
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane )	-	1000.00	nil

Complete

31 Dec, 2023

-
0.0

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

1-Emitting Pipe system, 2-Raw material

15950 View breakup
• Rs.12075/- (For BIS: Rs.9056/-) • For Raw material (Optional): Rs.6600/- (For BIS: Rs.5106/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	0	nil
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1050.00	nil
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1125	SPECIMEN PREPARATION 625
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	nil
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700.00	nil
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925.00	nil
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700.00	nil
6.2.2(Fittings)	-	0	nil
6.3(General)	-	300.00	nil
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000.00	nil
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	0	nil
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000.00	nil
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	nil
8.2.2(Regulated Emitting Pipes)	-	0	nil
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	nil
8.3.2(Inside Diameter ofEmitting Pipe)	-	250	nil
8.3.3(Flow Paths in Emitting Unit)	-	200.00	nil
8.3.4(Spacing ofEmitter Units)	-	200.00	nil
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000.00	nil
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600.00	nil
8.5(Resistance to Tension at Elevated Temperature)	-	1100.00	nil
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400.00	nil
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200.00	nil
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600.00	nil
8.8(Determination of Emitting Unit Exponent)	-	600.00	nil
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	nil
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	nil

Complete

31 Dec, 2023

-
• Rs.12075/- (For BIS: Rs.9056/-) • For Raw material (Optional): Rs.6600/- (For BIS: Rs.5106/-)

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Irrigation Equipment-Emitters

4700.00 View breakup
Rs.4700/- (For BIS: Rs.3525/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300.00	nil
7.2(Flow path in emitters)	-	300.00	nil
7.3.1(Resistance to Hydrostatic pressure)	-	1000.00	nil
7.3.2(Resistance to Hydrostatic pressure)	-	0	nil
7.3.3(Resistance to Hydrostatic pressure)	-	0	nil
7.4.1(Emitter Pull Out In-line emitters)	-	500.00	nil
7.4.2(Emitter Pull Out On-line emitters)	-	0	nil
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000.00	nil
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	nil
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000.00	nil
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	nil
8.3(Determination of Emitter Exponent)	-	600.00	nil

Complete

31 Dec, 2023

-
0.0

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

UPVC screen and casing pipes for Bore/tube well

10325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100.00	nil
9.5(Tensile Strength IS 12235(Part 13))	-	1600.00	nil
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400.00	nil
9.3(Density IS 12235 (Part 14))	-	500.00	nil
9.2(Internal Diameter)	-	350.00	nil
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250.00	nil
8.4(Sealing rings - Hardness)	-	375.00	nil
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250.00	nil
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	0	nil
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0	nil
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0	nil
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	0	nil
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	0	nil
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0	nil
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0	nil
7.3.2(Rib height)	-	0	nil
7.3.1(No.of Ribs)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	NIL
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	nil
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1500.00	nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0	nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0	nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	0	nil
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0	nil
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	0	nil
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	0	NIL
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000.00	nil
9.1(Visual Appearance)	-	0.00	NIL

Complete

31 Dec, 2023

-
-

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

PE pipe for Irrigation Lateral

9400 View breakup
• Rs.9725/- (For BIS: Rs.7431/-) • For Raw Material: Rs.6700/- (For BIS: Rs.5181/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	nil
4.1.b(Potyethylene - anti-oxidant)	-	0	nil
4.1.c.i (Density)	-	1125	SAMPLE PREPARATION -625
4.1.c.ii (Toluene extract - Annex A)	-	1100.00	nil
4.1.c.iii (Volatile matter - Annex B )	-	700.00	nil
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925.00	nil
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700.00	nil
7.3(Tensile Test)	-	1350.00	nil
7.3(Elongation at Break)	-	0	nil
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200.00	nil
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	nil
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	nil
7.2(Reversion Test)	-	1000	nil
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0	nil
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	nil

Complete

31 Dec, 2023

-
0.0

Bureau of Indian Standards

The National Standards Body of India

CIPET, Bhubaneswar

B/25, C.N.I complex, Patia, Bhubaneswar, BHUBANESWAR, Khordha, Odisha, 751024

7566177001 [email protected]

Scope List

No Record Found