BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 1474 Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131001

9310314585 [email protected]

Scope List

Reset

74 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 14286 : Part 1 : Sec 4 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 4 special requirements for testing of thin - Film Cu(In,ga)(S,se)2 based photovoltaic (Pv) modules (Second Revision)

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Insulation test (MQT 03))	-	15000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	55000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	55000	-
11.6(Performance at STC and NMOT (MQT 06))	-	60000	-
11.7(Performance at low irradiance (MQT 07))	-	57500	-
11.8(Outdoor exposure test (MQT 08))	-	32500	-
11.9(Hot-spot endurance test (MQT 09))	-	80000	-
11.1(UV preconditioning test (MQT 10))	-	37500	-
11.11(Thermal cycling test (MQT 11))	-	50000	-
11.12(Humidity-freeze test (MQT 12))	-	57500	-
11.13(Damp heat test (MQT 13))	-	42500	-
11.14(Robustness of terminations (MQT 14))	-	20000	-
11.15(Wet leakage current test (MQT 15))	-	25000	-
11.16(Static mechanical load test (MQT 16))	-	25000	-
11.17(Hail test (MQT 17))	-	52500	-
11.18(Bypass diode thermal test (MQT 18))	-	27500	-
11.19(Stabilization (MQT 19))	-	42500	-

Complete

19 Mar, 2023

-
-

IS 16169 (2019)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision)

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Test for single or multi-phase inverter)	-	300000	5% discount for BIS
Annex A(Islanding as it applies to PV systems)	-	0	N/A
Annex B(Test for independent islanding device)	-	0	N/A

Complete

19 Mar, 2023

-
-

IS 1474 (1959)

Specification for commercial refrigerators

310000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3.1(Gross Volume)	-	5000	-
3.3(Volume of evaporator space)	-	5000	-
3.5(Volume of fixed shelves and partitions)	-	5000	-
3.6(Computation of shelf area)	-	5000	-
3.7(Net volume)	-	5000	-
7.5.1(Pressure Test)	-	36000	-
7.5.3(Insulation Resistance Test (Assembly Test))	-	18000	-
7.5.4(Thermal Insulation Test)	-	85000	-
7.5.5(Condensation Test)	-	65000	-
7.5.6(Rating Test)	-	61000	-
7.5.7(Test for Adequate Rating of Compressor Motor)	-	10000	-
7.5.8(Door Seal Test)	-	10000	-

Complete

19 Mar, 2023

-
-

IS 14166 (1994)

Respiratory protective devices full - Face masks - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

19 Mar, 2023

-
-

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

Shot firing cables

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Conductor : Material -IS : 8130-2013)	-	0	-
4.1(Insulation : Material -IS : 5831-1984)	-	0	-
5.1(Sheath : materail IS : 5831-1984)	-	0	-
6.1(Conductor : Construction IS : 8130-2013)	-	0	-
7.1(Insulation : Application )	-	0	-
7.2(Thickness of Insulation - average )	-	750	-
7.2(Thickness of Insulation - Min. )	-	750	-
7.3(Colour of Insulation)	-	0	-
8.1(Nominal radial thickness of sheath )	-	750	-
8.2(Thickness of Sheath)	-	750	-
8.2(Thickness of Sheath - min.)	-	750	-
8.3(Colour of Sheath)	-	0	-
9.1 a)(Annealing test)	-	600	-
9.1 b)(Conductor resistance test)	-	750	-
9.1 d) i)(Insulation : Tensile strength)	-	1250	-
9.1 d) i)(Insulation : elongation at break)	-	1250	-
9.1 d) i)(Sheath : Tensile strength)	-	1250	-
9.1 d) i)(Sheath : elongation at break)	-	1250	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength)	-	1250	-
9.1 d) ii)(Ageing in air oven - Insulation : Tensile strength Variation)	-	1250	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation at break)	-	1250	-
9.1 d) ii)(Ageing in air oven - Insulation : elongation variation at break)	-	1250	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength)	-	1250	-
9.1 d) ii)(Ageing in air oven - Sheath : Tensile strength variation )	-	1250	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation at break)	-	1250	-
9.1 d) ii)(Ageing in air oven - Sheath : elongation variation at break)	-	1250	-
9.1 d) iii )(Loss of mass test - insulation )	-	1500	-
9.1 d) iii )(Loss of mass test - Sheath )	-	1500	-
9.1 d) iv )(Hot deformation - insulation )	-	1200	-
9.1 d) iv )(Hot deformation - sheath )	-	1200	-
9.1 d) v )(Heat shock - insulation )	-	800	-
9.1 d) v )(Heat shock - Sheath )	-	800	-
9.1 d) vi )(Shrinkage - insulation )	-	1200	-
9.1 d) vi )(Shrinkage : Crack observed - insulation )	-	1200	-
9.1 d) vi )(Shrinkage - Sheath )	-	1200	-
9.1 d) vi )(Shrinkage: Crack observed - Sheath )	-	1200	-
10.2(Voltage test )	-	750	-
9.1 f)(Insulation resistance test: Volume resistivity )	-	750	-
9.1 f)(Insulation resistance test : IR constant)	-	750	-
10.3(Spark Test)	-	1600	-
10.4(Flammability Test )	-	1600	-
11.1(Manufacturer’s Identification)	-	0	-
11.2(Cable Code)	-	0	-
12.1(packing )	-	0	-
12.2(Marking )	-	0	-
12.2.1(Standard marks )	-	0	-

Complete

19 Mar, 2023

-
-

IS 11328 (1985)

Specification for self - Contained automatic ice makers

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5.1(Pressure Test and leakage tests)	-	5000	-
5.5.2(Insulation resistance test)	-	5000	-
5.5.3(High voltage test)	-	5000	-
5.5.4(Ice making capacity rating test)	-	10000	-

Complete

19 Mar, 2023

-
-

IS 10322 : Part 5 : Sec 4 (1987)

Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires

Portable General Purpose Luminaires

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	5% discount for BIS
6(Construction)	-	4500	5% discount for BIS
7(Creepage Distance And Clearances)	-	1000	5% discount for BIS
8(Provision for Earthing)	-	1000	5% discount for BIS
9(Terminals)	-	3000	5% discount for BIS
10(External & Internal Wiring)	-	2000	5% discount for BIS
11(Protection Against Electric Shock )	-	1000	5% discount for BIS
13.3(Mechanical Strength Test )	-	3000	5% discount for BIS
13.4(Endurance Test and Thermal test)	-	3000	5% discount for BIS
13.5(Resistance To Dust & Moisture)	-	3000	5% discount for BIS
13.6(Insulation Resistance and Electric Strength)	-	3000	5% discount for BIS
13.7(Resistance to Heat, Fire & Tracking)	-	3000	5% discount for BIS
13.8(Photometric Test)	-	14000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	1000	-
9.3(Thickness of Insulation - Minimum)	-	1000	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	1000	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	-
13.3(Armouring : Dimensions -Formed wire )	-	1000	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	800	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	750	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	750	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	750	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	750	-
13.6 g)(ARMOURING: Resistivity)	-	800	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-
14.3(Thickness of outer sheath - minimum)	-	1000	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1200	-
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	-
15.1 a) iv)(Resistance test - Main conductor)	-	1000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	1000	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	800	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	800	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	800	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	800	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	800	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1200	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1200	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1200	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1200	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	800	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	100	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	-
15.1 e) v) (Sheath : Hot deformation)	-	1100	-
15.1 e) vi) (Sheath : Heat shock test)	-	800	-
15.1 e) vii) (Sheath : Thermalstability)	-	800	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	800	-
16.2(HIGH VOLTAGE TEST )	-	1500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	1600	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	1600	-
16.9(Oxygen Index Test)	-	1100	-
16.1(Flame Retardance Test on Single Cables)	-	1250	-
16.11(Flame Retardance Test on Bunched Cables)	-	1250	-
16.13(Test for Halogen Acid Gas Evolution)	-	1100	-
16.14(Temperature Index)	-	1100	-
17.1(Manufacturer'. ldeadentificatioa)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-

Complete

19 Mar, 2023

-
-

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1( Copper Cooduetor)	-	0	-
3.2(Aluminium conductor)	-	0	-
4.1(INSULATION : lnsulation for General Service)	-	0	-
4.2(INSULATION : Heat Resisting insulation)	-	0	-
4.3(INSULATION : Silicone Rubber Insulation)	-	0	-
5.1(TAPE : Proofed Tape)	-	0	-
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	0	-
5.3(TAPE : Giass Tape)	-	0	-
6.1(FILLERS : )	-	0	-
7.1(BRAID : Textile Braid)	-	0	-
7.2(BRAID : Glass Braid )	-	0	-
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	0	-
8.2(SHEATH :Heat Resisting Insulated Cables)	-	0	-
9.1(PresenRtive Compound)	-	0	-
9.2(Varnish)	-	0	-
10( Conductor )	-	200	10% discount of BIS
11(Separator tape)	-	0	-
12.2(Insulation : Thickness of Insufatien)	-	200	10% discount of BIS
12.4(Insulation : Allplication of Insulation)	-	0	-
13(CORE IDENTiFICATlON)	-	0	-
14(Tape)	-	0	-
15(BRAIDING)	-	0	-
16(COMPOUNDING AND VARNISHING)	-	0	-
17(LAYING UP OF CORES)	-	0	-
18( Binder tape)	-	0	-
19.2(Sheath : Thickness of Sheath)	-	200	10% discount of BIS
19.4( Sheath :Colour)	-	0	-
20( Overall diameter)	-	200	10% discount of BIS
21. (a)(Persulphate tests (for copper))	-	500	10% discount of BIS
21. (b)(Annealing Test (for coper))	-	600	10% discount of BIS
21. (c)( Tensile Test (for aluminium))	-	600	10% discount of BIS
21. (d)( Wrapping Test (for aluminium))	-	500	10% discount of BIS
21. (e)(Conductor Resistance )	-	400	10% discount of BIS
21.1( Tensile strength )	-	500	10% discount of BIS
22.1( Elongation)	-	500	10% discount of BIS
21.1(type test : Ageing In air oven)	-	1100	10% discount of BIS
21.1(type test : Ageing in air bomb)	-	1000	10% discount of BIS
21.1(type test : Ageing In oxygen bomb)	-	1000	10% discount of BIS
21.1(type test : Hot set elongation)	-	600	10% discount of BIS
21.1(type test : Tear resistance )	-	1000	10% discount of BIS
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	700	10% discount of BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	1600	10% discount of BIS
21(Water absorption test)	-	600	10% discount of BIS
23(identification)	-	0	-

Complete

19 Mar, 2023

-
-

IS 14155 (1994)

Domestic electric clothes washing machines for household use - Specification

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Determination of the washing performance standard measurement with a load of clean material and standardized soiling)	-	75000	-
12(Determination of wear suffered by textile)	-	32500	-
13(Determination of water retention percentage (Rinsing efficiency))	-	15000	-
14(Determination of the water extraction efficiency)	-	15000	-
15(Determination of water and energy consumption)	-	20000	-
16(Determination of mechanical detergent loss in the sump of washing machine)	-	7000	-
17(Endurance)	-	20000	-
18(Finish)	-	500	-

Complete

19 Mar, 2023

-
-

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

Winding Wires for Submersible Motors

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Packing (As per Cl.5.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.1(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.1(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.1(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.1(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.1(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.1(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.1(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
4(Conductor As per IS:8783(Pt 1):1995])	-	750	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
5([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
4.1, table 1 & 2(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4.1, table 1 & 3(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4.1, table 1 & 4(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4.2(Insulation (As per Cl.4.2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4.3(Insulation (As per Cl.4.3 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4.4(Insulation (As per Cl.4.4 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4.5((Cl.4.5 of IS 8783 (Part 4/Sec 3) : 1995))	-	750	-
4.1([Cl 4.1 and Table-1 of IS:8783(Pt. 2)])	-	750	-
4.1([Cl 4.1 and Table-1 of IS:8783(Pt. 2)])	-	750	-
5(Packing (As per Cl.5.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6(Marking (As per Cl.6.1 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
6.2(Marking (As per Cl.6.2 of IS 8783 (Part 4/Sec 3) : 1995))	-	200	-
4(Conductor As per IS:8783(Pt 1):1995])	-	750	-
4([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
4([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
4([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
4([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
4([Cl 5 of IS:8783(Pt 1):1995 & 4.1 of IS:8783(Pt 3):1995])	-	750	-
4(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4(Insulation (As per Cl.4.1 and Table 1 & 2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4(Insulation (As per Cl.4.2 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4(Insulation (As per Cl.4.3 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4(Insulation (As per Cl.4.4 of IS 8783(Part4/Sec 3): 1995)	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4(Physical test for Insulation [Cl.4.1 of IS:8783(Pt-2):1995])	-	750	-
4((Cl.4.5 of IS 8783 (Part 4/Sec 3) : 1995))	-	750	-
4([Cl 4.1 and Table-1 of IS:8783(Pt. 2)])	-	750	-
4([Cl 4.1 and Table-1 of IS:8783(Pt. 2)])	-	750	-

Complete

19 Mar, 2023

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Aerial Bunched Cables for working voltages upto and inc

16000 View breakup
Rs.16000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	0	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	750	5% discount for BIS
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	750	5% discount for BIS
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	750	5% discount for BIS
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1200	5% discount for BIS
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1200	5% discount for BIS
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1200	5% discount for BIS
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1200	5% discount for BIS
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1200	5% discount for BIS
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1250	5% discount for BIS
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1250	5% discount for BIS
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	5% discount for BIS
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	5% discount for BIS
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1100	5% discount for BIS
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1100	5% discount for BIS
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	750	5% discount for BIS
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1200	5% discount for BIS
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1200	5% discount for BIS
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1200	5% discount for BIS
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1250	5% discount for BIS
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1250	5% discount for BIS
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	5% discount for BIS
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	5% discount for BIS
10.1 g)(High voltage test - IS10810:Part 45)	-	750	5% discount for BIS
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

150500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 b)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 c)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 d)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 e)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 f)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 g)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 h)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 j)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 k)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 m)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 p)(MARKING OF METERS : Name Plate )	-	0	Qualitative
7.1 n)(MARKING OF METERS : Name Plate )	-	0	Qualitative
12.7.6.1( Test of insulation Properties : General test conditions )	-	2000	5% discount for BIS
12.7.6.2(Impulse voltage test)	-	5000	5% discount for BIS
12.7.6.3(ac Voltage test)	-	3000	5% discount for BIS
12.7.6.4(Insulation resistance test)	-	3000	5% discount for BIS
12.10.1 a)(Testof Accuracy Requirements : General Test Conditions )	-	0	Qualitative
12.10.1 b)(Testof Accuracy Requirements : General Test Conditions )	-	0	Qualitative
12.10.1 c)(Testof Accuracy Requirements : General Test Conditions )	-	0	Qualitative
12.10.1 d)(Testof Accuracy Requirements : General Test Conditions )	-	0	Qualitative
12.10.1 e)(Testof Accuracy Requirements : General Test Conditions )	-	0	Qualitative
12.10.1 f)(Testof Accuracy Requirements : General Test Conditions )	-	500	5% discount for BIS
12.16 a)(Limits of Error and Interpretation or Test Results)	-	100	5% discount for BIS
12.16 b)(Limits of Error and Interpretation or Test Results)	-	100	5% discount for BIS
12.16 c)(Limits of Error and Interpretation or Test Results)	-	100	5% discount for BIS
12.15(Test of Meter Constant/Registration)	-	1000	5% discount for BIS
12.14(Test of Starting Conditions)	-	200	5% discount for BIS
12.13(Test of No-Load Condition)	-	500	5% discount for BIS
12.12(Test ofAmbient Temperature Influence)	-	2500	5% discount for BIS
12.17(Repeatability of Error Test )	-	3500	5% discount for BIS
12.11(Test of Iniluence Quantities)	-	3500	5% discount for BIS
12.7.1(Test of Power Consumption)	-	3000	5% discount for BIS
12.7.2(Test of Influence of Supply Voltage)	-	5000	5% discount for BIS
12.7.3( Test of Influence of Short-time Overcurrents)	-	5000	5% discount for BIS
12.7.4(Test of Influence of Self-Heating)	-	4000	5% discount for BIS
12.7.5(Test of Influence of Heating)	-	5000	5% discount for BIS
12.8(TestorImmunity to Earth Fault)	-	5000	5% discount for BIS
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	13000	5% discount for BIS
12.9.4(FastTransient BurstTest)	-	13000	5% discount for BIS
12.9.5(Radio Interference Measurement)	-	24000	5% discount for BIS
12.6.1(Dry Heat Test)	-	1500	5% discount for BIS
12.6.2(Cold Test)	-	2000	5% discount for BIS
12.6.3( Damp Heat Cycle Test)	-	4000	5% discount for BIS
12.3.1(Shock Test)	-	5000	5% discount for BIS
12.3.2(Vibration Test)	-	8000	5% discount for BIS
12.3.3( Spring Hammer Test)	-	2000	5% discount for BIS
12.5 a)(Test of Protection Against Penetration of Dust and Water)	-	5000	5% discount for BIS
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	2500	5% discount for BIS
12.4(Testof Resistance to Heat and Fire )	-	5000	5% discount for BIS
6(General and constructional requirements)	-	0	Qualitative
6.1(General)	-	0	Qualitative
6.2(Meter case)	-	0	Qualitative
6.3(Window)	-	0	Qualitative
6.4(Terminals, terminal block and protective earth terminal)	-	1000	5% discount for BIS
6.5(Terminal Cover(s))	-	0	Qualitative
6.6(Clearance and creepage dis¬t¬ances)	-	1500	5% discount for BIS
6.7(Insulating encased meter)	-	0	Qualitative
6.10(Display of measured values)	-	0	Qualitative
6.11(Output device)	-	3000	5% discount for BIS
7.1.1(BIS Standard Mark)	-	0	Qualitative
7.2(Connection diagrams and terminal marking)	-	0	Qualitative
11.1(Limits of Error and Interpretation or Test Results)	-	500	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 14697 (1999)

AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification

150500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)( MARKING OF METERS: Name Plate )	-	0	-
7.1 b)( MARKING OF METERS: Name Plate )	-	0	-
7.1 c)( MARKING OF METERS: Name Plate )	-	0	-
7.1 d)( MARKING OF METERS: Name Plate )	-	0	-
7.1 e)( MARKING OF METERS: Name Plate )	-	0	-
7.1 f)( MARKING OF METERS: Name Plate )	-	0	-
7.1 g)( MARKING OF METERS: Name Plate )	-	0	-
7.1 h)( MARKING OF METERS: Name Plate )	-	0	-
7.1 j)( MARKING OF METERS: Name Plate )	-	0	-
7.1 k)( MARKING OF METERS: Name Plate )	-	0	-
7.1 n)( MARKING OF METERS: Name Plate )	-	0	-
7.1 m)( MARKING OF METERS: Name Plate )	-	0	-
7.1.1(Bis marking)	-	0	-
7.2(Connection Diagrams and Terminal Marking)	-	0	-
12.7.6.2(Impulse voltage test )	-	40000	-
12.7.6.3(ac Voltage test)	-	40000	-
12.7.6.4(Insulation resistance test)	-	40000	-
12.9.1 a)( General Test Conditions)	-	0	-
12.9.1 b)( General Test Conditions)	-	0	-
12.9.1 c)( General Test Conditions)	-	0	-
12.9.1 b)( General Test Conditions)	-	0	-
11.1(Limits of Error Due to Variation of the Current)	-	12500	-
12.15 a)(Limits of error and Interpretation of Test Results )	-	0	-
12.15 b)(Limits of error and Interpretation of Test Results )	-	0	-
12.15 c)(Limits of error and Interpretation of Test Results )	-	0	-
12.14(Test of Meter Constant/ Registration)	-	12500	-
12.13(Test of Starting Conditions)	-	12500	-
12.12(Test of No-Load Condition)	-	12500	-
12.11(Test of Ambient Temperature Influence)	-	12500	-
12.16(Repeatability of Error Test)	-	12500	-
12.1(Test of Influence Quantities)	-	7500	-
12.7.1(Test of Power Consumption )	-	40000	-
12.7.2(Test of Influence of Supply Voltage)	-	40000	-
12.7.3(Test of Influence of Short-Time Over Currents)	-	40000	-
12.7.4(Test of influence of self-heating)	-	40000	-
12.7.5(Test of Influence of Heating )	-	40000	-
12.8.2(Test for Immunity to Electrostatic Discharge (ESD))	-	50000	-
12.8.4(Fast Transient Burst Tes)	-	50000	-
12.8.5(Radio interference measurement)	-	50000	-
12.6(Test for Climatic Influences)	-	7500	-
12.6.1(dry heat test)	-	7500	-
12.6.2(cold test)	-	7500	-
12.6.3(Damp Heat Cycle Test )	-	7500	-
12.3.3(Spring Hammer Test)	-	15000	-
12.3.1(Shock Test)	-	15000	-
12.3.2(Vibration Test)	-	15000	-
12.5 a)(Test of Protection Against Penetration of Dust )	-	7500	-
12.5 b)( Protection against penetration of water)	-	7500	-
12.4(Test of Resistance to Heat and Fire)	-	5000	-
6.11(Output device)	-	3000	-
6.10(Display of measured values)	-	0	-
6.7(Insulating encased meter)	-	0	-
6.6(Clearance and creepage distances)	-	1500	-
6.5(Terminal Cover(s))	-	0	-
6.3(Window)	-	0	-
6.4(Terminals, terminal block and protective earth terminal)	-	1000	-
6.2(Meter case)	-	0	-
6.1(General)	-	0	-
6(General and constructional requirements)	-	0	-
12.17(Test of immunity to earth/phase fault)	-	12500	-
12.1(Operation of Accessories)	-	7500	-
12.1(Abnormal Magnetic Induction of External Origin 10mT)	-	7500	-
12.1(Magnetic induction of External Origin 0.5mT)	-	7500	-
12.1(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	7500	-
12.1(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	7500	-
12.1(Phase of Auxiliary Voltage)	-	7500	-
12.1(Auxiliary Voltage)	-	7500	-
12.1(Voltage Unbalanced)	-	7500	-
12.1(Reversed Phase Sequence)	-	7500	-
12.1(Waveform 10% of 3rd Harmonics)	-	7500	-
12.1(Frequency Variation)	-	7500	-
12.1(Voltage Variation)	-	7500	-
7.1(Marking of meters Name plate)	-	0	-

Complete

19 Mar, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 1474 Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131001

9310314585 [email protected]

Scope List

No Record Found