BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 1474 Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131001

9310314585 [email protected]

Scope List

Reset

74 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7, (Elec)(Documentation)	-	0	-
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	300000	5% discount for BIS
Annex A, (Elec)(Islanding as it applies to PV systems)	-	0	-
Annex B, (Elec)(Test for independent islanding device)	-	0	-
6, (Elec)(Test for single or multi-phase inverter)	-	300000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS/IEC 61730 : PART 2 (2004)

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

837500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Visual Inspection (MST 01))	-	7500	-
10.2(Accessibility test (MST 11))	-	22500	-
10.3(Cut susceptibility test (MST 12))	-	27500	-
10.4(Ground Continuity Test (MST 13))	-	35000	-
10.5(Impulse voltage test (MST 14))	-	42500	-
10.6(Dielectric withstand test (MST 16))	-	47500	-
10.7(Temperature test (MST 21))	-	85000	-
10.8(Fire test (MST 23))	-	175000	-
10.9(Reverse Current overload test (MST 26))	-	90000	-
10.10(Module breakage test (MST 32))	-	55000	-
11.1(Partial discharge-test (MST 15))	-	60000	-
11.2(Conduit Bending test (MST 33))	-	55000	-
11.3(Terminal box knockout tests (MST 44))	-	55000	-
Cl.5, Table 7(Thermal cycling (T200) (MST 51))	-	0	-
Cl.5, Table 7(Thermal cycling (T50) (MST 51))	-	0	-
Cl.5, Table 7(Humidity freeze (10HF) (MST 52))	-	0	-
Cl.5, Table 7(Damp heat (DH1000) (MST 53))	-	0	-
Cl.5, Table 7(UV resistance (MST 54))	-	0	-
Cl.5, Table 7(Wet leakage current test (MST 17))	-	0	-
Cl.5, Table 7(Robustness of termination test (MST 42))	-	0	-
Cl.5, Table 7(Hot spot test (MST 22))	-	0	-
Cl.5, Table 7(Mechanical load test (MST 34))	-	0	-

Complete

19 Mar, 2023

-
-

IS/IEC 61730 : PART 1 (2004)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

468500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Application classes)	-	0	-
4(Construction requirements)	-	0	-
5(Polymeric materials)	-	250000	-
6(Internal wiring and current-carrying parts)	-	7500	-
7(Connections)	-	75000	-
8(Bonding and grounding)	-	7500	-
9(Creepage and clearance distances)	-	17500	-
10(Field wiring compartments with covers)	-	110000	-
11(Marking)	-	1000	-
12()	-	0	-

Complete

19 Mar, 2023

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

8000 View breakup
Rs.8000/-(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	750	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	750	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	750	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	750	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	750	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	750	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	750	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	750	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	750	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	750	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	750	-
4.3.2 - 5.21( Expanding materials)	-	500	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	100	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	100	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	100	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	100	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	100	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	100	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	100	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	100	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	100	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	100	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	100	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	100	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	100	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	100	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	100	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	100	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	100	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	100	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	100	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	100	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	100	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	250	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	250	-
4.6.2(Edges-Functional sharp edges)	-	250	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	250	-
4.6.4( Edges-Edges on moulded toys)	-	250	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	250	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	150	-
4.7.2 - a(Points-Functional sharp points)	-	150	-
4.7.2 - b(Points-Functional sharp points)	-	150	-
4.7.3 (Wooden toys)	-	150	-
4.8.1(Projections-General requirments)	-	100	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	750	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	750	-
4.9 - c( Metal wires and rods)	-	750	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	250	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	150	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	100	-
4.9 - c( Metal wires and rods-Spokes ends)	-	100	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	100	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	100	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	150	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	150	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	150	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	150	-
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	150	-
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	150	-
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	150	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	150	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	150	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	150	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	150	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	150	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	150	-
4.11.6(Cords- Electrical cables)	-	150	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	150	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	150	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	150	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	150	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	150	-
4.11.10(Cords-Cords on toy bags)	-	150	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	150	-
4.11.11( Cords, strings and lines for flying toys- )	-	150	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	250	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	-
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	-
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	-
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	250	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	250	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	250	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	250	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	100	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	100	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	100	-
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	100	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	100	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	100	-
4.14(a)(Springs)	-	100	-
4.14(b)(Springs)	-	100	-
4.14(c)(Springs)	-	100	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	200	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	200	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	200	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	200	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	750	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	200	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	-
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	-
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	500	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
4.16.3(Enclosures-Toys that enclose the head)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	100	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	100	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	100	-
4.18.2(b)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	100	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	100	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	100	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	100	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	100	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	100	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	100	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	100	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	100	-
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	200	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	100	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	100	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	200	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	200	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	250	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	200	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	200	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	200	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	200	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	200	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	200	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	200	-
4.19(Rotors and propellers)	-	250	-
4.2(Aquatic toys)	-	200	-
4.21(a)(Braking)	-	250	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	250	-
4.22.1(Toy bicycles-Instructions for use)	-	250	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	250	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	250	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	250	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	250	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	250	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	300	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	300	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	300	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	300	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	300	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	300	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	150	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	100	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	100	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	100	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	100	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	200	-
4.28( Percussion caps specifically designed for use in toys)	-	200	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	250	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	200	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	200	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	200	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	200	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	250	-
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	250	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	150	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	250	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	200	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	200	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	100	-
4.30.6 ( Toy scooters-Braking)	-	250	-
4.30.6 ( Toy scooters-Braking)	-	250	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	250	-
4.30.7( Toy scooters-Wheel size(diameter))	-	200	-
4.30.8(Toy scooters-Projections)	-	250	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	250	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	250	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	100	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	100	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	100	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	100	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	100	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	200	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	200	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	150	-
4.34(Sledges and toboggans with cords for pulling)	-	200	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	-

Complete

19 Mar, 2023

-
-

IS/IEC 60669 : Part 2 : Sec 1 (2008)

Switches for Household and Similar Fixed Electrical Installations Part 2 Particular Requirements Section 1 Electronic Switches

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification)	-	0	-
8(Marking)	-	0	-
9(Checking Dimension)	-	500	-
10(Protection against Access to Live Parts)	-	1000	-
11(Provision for earthing)	-	1000	-
12(Terminals)	-	1000	-
13(Constructional Requirements)	-	2500	-
14(Mechanism)	-	2500	-
15(Resistance to ageing, protection provided by enclosures of switches, and resistance to humidity )	-	5000	-
16(Insulation resistance & Electric Strength)	-	2500	-
17(Temperature Rise)	-	2500	-
18(Making and breaking capacity)	-	5000	-
19(Normal Operation)	-	1500	-
20(Mechanical Strength)	-	1500	-
21(Resistance to heat)	-	2000	-
22(Screws, current -carrying parts and connections)	-	1000	-
23(Creepage distances, clearances and distance through sealing compound)	-	1000	-
24(Resistance of insulating material to abnormal heat to fire and to tracking)	-	2500	-
25(Resistance to rusting)	-	2500	-
26(EMC Requirements)	-	22500	-
101(Abnormal Conditions)	-	2000	-
102(Components)	-	0	-

Complete

19 Mar, 2023

-
-

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

229500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.8.1(Additional information)	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(Connection diagrams and terminal marking)	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(BIS Standard Mark)	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(Marking of meters Name plate)	-	1200	5% discount for BIS
6.3(Clearance and creepage distances)	-	500	5% discount for BIS
10.0(Smart Meter Functional Requirements)	-	12000	5% discount for BIS
9.3(Test of Display)	-	200	5% discount for BIS
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	56000	5% discount for BIS
6.4(Test of resistance to heat and fire)	-	4000	5% discount for BIS
Note b of Table 1(Access and data read test)	-	1500	5% discount for BIS
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	200	5% discount for BIS
6.5(Test of protection against penetration of dust and water)	-	5500	5% discount for BIS
6.5(Spring hammer test)	-	300	5% discount for BIS
6.5(Shock test)	-	4500	5% discount for BIS
6.5(Vibration test)	-	7000	5% discount for BIS
6.9(Damp heat cyclic test)	-	5800	5% discount for BIS
6.9(Cold test)	-	4000	5% discount for BIS
6.9(Dry heat test)	-	1200	5% discount for BIS
6.11(Test of immunity to electrostatic discharge)	-	7500	5% discount for BIS
6.11(Fast transient burst test)	-	12500	5% discount for BIS
6.11(Radio interference measurement)	-	25000	5% discount for BIS
6.10.7(Test of immunity to earth/phase fault)	-	2500	5% discount for BIS
6.10.5(Test of influence of heating)	-	1500	5% discount for BIS
6.10.4(Test of influence of self-heating)	-	1200	5% discount for BIS
6.10.3(Test of influence of short time over currents)	-	5000	5% discount for BIS
6.10.2(Test of influence of supply voltage)	-	10500	5% discount for BIS
6.10.1(Test of power consumption)	-	700	5% discount for BIS
6.12(Operation of Accessories)	-	1000	5% discount for BIS
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	1500	5% discount for BIS
6.12(Magnetic induction of External Origin 0.5mT)	-	1500	5% discount for BIS
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	1500	5% discount for BIS
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	1500	5% discount for BIS
6.12(Voltage Unbalanced)	-	500	5% discount for BIS
6.12(Reversed Phase Sequence)	-	500	5% discount for BIS
6.12(Waveform 10% of 3rd Harmonics)	-	1200	5% discount for BIS
6.12(Frequency Variation)	-	500	5% discount for BIS
6.12(Voltage Variation)	-	500	5% discount for BIS
6.12(Test of influence quantities)	-	2000	additional Test wise charges as per added
6.12(Test of repeatability of error)	-	3500	5% discount for BIS
6.12(Test of ambient temperature influence)	-	2500	5% discount for BIS
6.12(Test of no-load condition)	-	500	5% discount for BIS
6.12(Test of starting condition)	-	500	5% discount for BIS
6.12(Test of meter constant)	-	1000	5% discount for BIS
6.12(Test on limits of error)	-	2000	5% discount for BIS
6.10.6(Insulation test)	-	500	5% discount for BIS
6.10.6(ac high voltage test)	-	500	5% discount for BIS
6.10.6(Impulse voltage test)	-	4000	5% discount for BIS
6.7(Output device)	-	1500	5% discount for BIS
6.6(Display of measured values)	-	500	5% discount for BIS
6.2.2(Insulating encased meter)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2.2(Terminal Cover(s))	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2.1(Terminals, terminal block and protective earth terminal)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Communication module)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Window)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(Meter case)	-	0	Charges Covered in General and constructional requirements Cl. 6.2
6.2(General Constructional requirements)	-	2000	5% discount for BIS
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.1(Electrical Requirments)	-	0	Qualitative
6.12((11 of IS 14697 ) Accuracy Requirement )	-	0	Test wise charges as per added
6.8(Inspection )	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
6.8(Inspection ( 7 of IS 14697) )	-	0	Charges Covered in Marking of meter Name plate Cl. 6.8
8, 9.5(Smart Meter Communicability)	-	18000	5% discount for BIS
6.11(Surge Immunity test)	-	10000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 16102 : Part 2 (2017)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	2500	-
8(Lamp Input)	-	15000	-
9(light output)	-	17500	-
10(Colour Nomenclature, Variation and Rendering)	-	30000	-
11(Lamp Life)	-	125000	-

Complete

19 Mar, 2023

-
-

IS 15750 (2006)

Household frost - Free refrigerating appliances - Refrigerators cooled by internal forced air circulation - Characteristics and test methods - Specification

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3(General Definitions)	-	0	-
4(Material Design & manufacturing)	-	25000	-
5(Required characteristics)	-	0	-
6(Determination of linear dimensions, volumes and areas)	-	10000	-
7(General test condition)	-	20000	-
8(Testing the air tightness of Door or Lid Seal)	-	20000	-
9(Testing the opening force of door(s) or lid(s))	-	20000	-
10(Testing the durability of hinges and handles of door(s) and lid(s))	-	20000	-
11(Testing the mechanical strength of shelves and similar components)	-	22500	-
12(Testing the storage temperatures)	-	45000	-
13(Water vapour condensation test )	-	25000	-
14(Energy consumption test)	-	35000	-
15(Temperature Rise Test)	-	22500	-
16(Pull down test)	-	15000	-
17(Ice making test)	-	30000	-
18(Test for absence of odour & taste)	-	15000	-
19(High voltage test)	-	12500	-
20(Insulation resistance test)	-	12500	-
22(Requirement of ECO mark)	-	0	-
23(Designation)	-	0	-
24(Marking)	-	0	-

Complete

19 Mar, 2023

-
-

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

435000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.8(Doors & Fittings)	-	0	-
5.5(Strength Pressure test for components)	-	0	-
5.6(External surface condensation test)	-	0	-
5.1(Sound level)	-	0	-
6(Measurement of freezer storage capacity)	-	0	-
6.11(Volume measurement Water fill method)	-	0	-
9.1(No load test)	-	0	-
9.2.1(Pull down time)	-	0	-
9.2.2(Power consumption & percentage running time)	-	0	-
10.2.1(Door seal test )	-	0	-
10.2.2(Machanical strength of shelves and similar components)	-	0	-
10.2.3(Thermal insulation test )	-	0	-
10.2.5(High voltage test)	-	0	-
10.2.6(Insulation resistance test)	-	0	-
10.2.7(Leakage current test )	-	0	-
10.2.8(Earth resistance test )	-	0	-
10.2.10(Full load test)	-	0	-
10.2.11(Measurement )	-	0	-
10.2.12(Temperature rise test)	-	0	-
4(Construction)	-	15000	-
5(Refrigeration system)	-	15000	-
6(Safety Requirements)	-	75000	-
7(Sound Pressure Level)	-	15000	-
8(Freezer Storage Capacity)	-	15000	-
11.1(No load Pull down Test)	-	57500	-
11.2(Energy Consumption Test)	-	75000	-
11.3(Temperature Rise Test)	-	25000	-
11.4(Door Seal Test)	-	12500	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	40000	-
11.6(Thermal Insulation Test ( External Condensation))	-	50000	-
11.7(Pressure Test)	-	40000	-
12(Test Packages)	-	0	-
13(Marking and Instruction)	-	0	-

Complete

19 Mar, 2023

-
-

IS 1476 : Part 1 (2000)

Performance of household refrigerating appliance - Refrigerators with or without low temperature compartment: Part 1 energy consumption and performance (Third Revision)

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	0	-
5(Material Design & Manufacture)	-	7500	-
6(Electrical Components)	-	5000	-
7.1(Dimensional characteristics)	-	0	-
7.2(Performance Characteristics)	-	0	-
8(Determination of Linear dimensions, volumes & areas.)	-	5000	-
9(Operational requirement)	-	40000	-
11( Additional Requirement for ECO mark)	-	0	-
13(Measurement)	-	0	-
14.1(Door Seal Test)	-	10000	-
14.2(Mechanical strength of shelves & similar components)	-	15000	-
14.3(Doors and fitting test)	-	12500	-
14.4(No load adjustment test)	-	15000	-
14.5(No-load performance Test)	-	28000	-
14.6(Ice making test)	-	22500	-
14.7(Thermal Insulation Test)	-	12500	-
14.8(High voltage test)	-	6000	-
14.9(Rated Energy consumption test)	-	22500	-
15.1(Thermostat Test)	-	22500	-
15.2(Insulation resistance)	-	6000	-

Complete

19 Mar, 2023

-
-

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

454000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General testing requirements)	-	60000	5% discount for BIS
5(Marking and documentation)	-	4000	5% discount for BIS
6(Environmental Requirements and conditions)	-	200000	5% discount for BIS
7(Protection against electric shock and energy hazards)	-	40000	5% discount for BIS
8(Protection Against mechanical Hazards)	-	20000	5% discount for BIS
9(Protection Against Fire Hazards)	-	30000	5% discount for BIS
11(Protection against liquid hazards)	-	20000	5% discount for BIS
12(Chemical hazards)	-	6000	5% discount for BIS
13(Physical requirements)	-	50000	5% discount for BIS
14(Components)	-	20000	5% discount for BIS
15(Software and firmware performing safety functions)	-	4000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 15644 (2006)

Safety of electric toys

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	0	Nil.
8.0(Power Input)	-	750	5% discount for BIS
9.0(Heating and abnormal operation)	-	4000	5% discount for BIS
10.0(Electrical strength at operating temperature)	-	1000	5% discount for BIS
11.1(Moisture resistance)	-	1750	5% discount for BIS
11.2(Resistant to humidity)	-	1750	5% discount for BIS
12.0(Electric strength at room temperature)	-	1000	5% discount for BIS
13.0(Mechanical strength)	-	750	5% discount for BIS
15.1(Protection of cords and wires)	-	250	5% discount for BIS
15.2(Protection of cords and wires)	-	250	5% discount for BIS
16.0(Components)	-	0	Nil.
17 Table-1(Screws and connections)	-	250	5% discount for BIS
17 Table-1(Nominal daimeter of screws made of insulating material)	-	250	5% discount for BIS
18.0(Clearance and creepage distance)	-	200	5% discount for BIS
19.1(Ball pressure test IEC 60695-10-2)	-	500	5% discount for BIS
19.2.1(Glow wire test IEC 60695-2-11)	-	500	5% discount for BIS
19.2.2(Needle flame test)	-	500	5% discount for BIS
14.1(Construction)	-	50	5% discount for BIS
14.2(Construction)	-	0	NIL.
14.3(Construction)	-	0	NIL.
14.4(Construction)	-	0	NIL.
14.5(Construction)	-	0	NIL.
14.6(Construction)	-	0	NIL.
14.7(Construction)	-	100	5% discount for BIS
14.8(Construction)	-	0	NIL.
14.9(Construction)	-	0	NIL.
14.1(Construction)	-	0	NIL.
14.11(Construction)	-	50	5% discount for BIS
14.12(Construction)	-	50	5% discount for BIS
14.13(Construction)	-	50	5% discount for BIS
14.14(Construction)	-	0	NIL.

Complete

19 Mar, 2023

-
-

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

17500 View breakup
Rs.17500/-(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	3000	5% discount for BIS
4.1.2 and A.4.1.2(Maximum height)	-	0	NIL.
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	0	NIL.
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	0	NIL.
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	1500	5% discount for BIS
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	1500	5% discount for BIS
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	1500	5% discount for BIS
4.1.4.4 and 6.7.2 (Motion rides)	-	1500	5% discount for BIS
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	1500	5% discount for BIS
4.1.4.5 (Slides)	-	0	NIL.
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	NIL.
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	0	NIL.
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	0	NIL.
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	0	NIL.
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	0	NIL.
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	0	NIL.
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	0	NIL.
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	0	NIL.
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	0	NIL.
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	2000	5% discount for BIS
4.3(Rung ladders, stepladders and stairways)	-	0	NIL.
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	0	NIL.
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	0	NIL.
4.3 c(The surface of the tread shall not be slippery)	-	0	NIL.
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	0	NIL.
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	0	NIL.
4.3 f(The inclination of stairways)	-	0	NIL.
4.3 f(The inclination of stepladders)	-	0	NIL.
4.3 f(The inclination of rung ladders)	-	0	NIL.
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	0	NIL.
4.3 g(A means of continuous hand support from a height of 760 mm)	-	0	NIL.
4.4.1 (Head and neck entrapment)	-	2000	5% discount for BIS
4.4.2(Entrapment of clothing and hair)	-	2000	5% discount for BIS
4.4.3(Entrapment of feet)	-	2000	5% discount for BIS
4.4.4(Entrapment of fingers)	-	0	NIL.
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	2000	5% discount for BIS
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	2000	5% discount for BIS
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	2000	5% discount for BIS
4.6.1 and A.4.6.(Stability of slides)	-	2000	5% discount for BIS
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	0	NIL.
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	0	NIL.
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	NIL.
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	NIL.
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	0	NIL.
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	NIL.
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	NIL.
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	0	NIL.
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	0	NIL.
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	0	NIL.
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	NIL.
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	NIL.
4.6.3 e and A.4.6.(The run-out section for the slide)	-	0	NIL.
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	0	NIL.
4.6.4 and A.4.6.(Roller slides)	-	0	NIL.
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	2000	5% discount for BIS
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	2000	5% discount for BIS
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	2000	5% discount for BIS
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	2000	5% discount for BIS
4.7.3.1(Swings intended for children under 36 months)	-	0	NIL.
4.7.3.2(Toddler swings without a crossbeam)	-	0	NIL.
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	0	NIL.
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	0	NIL.
4.8(Seesaws )	-	0	NIL.
4.9(Carousels and rocking toys)	-	0	NIL.
4.9(Free height of fall for carousels and rocking toys)	-	0	NIL.
4.10.1 and A.4.10(Inflatable activity toys - General)	-	0	NIL.
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	0	NIL.
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	0	NIL.
4.10.4.1 and A.4.10(Containment - General)	-	0	NIL.
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	0	NIL.
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	0	NIL.
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	0	NIL.
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	0	NIL.
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	0	NIL.
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	0	NIL.
4.10.4.4 and A.4.10(Safe collapse)	-	0	NIL.
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	0	NIL.
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	0	NIL.
4.11.1(Paddling pools - General)	-	1000	5% discount for BIS
4.11.2(Edges, points, and small parts)	-	1000	5% discount for BIS
4.11.3(Paddling pools with inflatable walls)	-	1000	5% discount for BIS
5.1(Labelling)	-	0	NIL.
5.2(Assembly and installation instructions)	-	0	NIL.
5.3(Maintenance instructions)	-	0	NIL.
5.4(Warnings)	-	0	NIL.

Complete

19 Mar, 2023

-
-

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	0	-
21.5(Classification of Luminaires')	-	0	-
21.6(Marking)	-	500	5% discount for BIS
21.7(Construction)	-	1500	5% discount for BIS
21.8(Creepage Distance and Clearances)	-	1000	5% discount for BIS
21.9(Provision for earthing)	-	1000	5% discount for BIS
21.10(Terminals)	-	1000	5% discount for BIS
21.11(External & Internal Wiring)	-	2000	5% discount for BIS
21.12(Protection against electric shock)	-	1000	5% discount for BIS
21.13(Endurance Tests and Thermal Tests)	-	25000	5% discount for BIS
21.14(Resistance to Dust & Moisture)	-	18000	5% discount for BIS
21.15(Insulation Resistance and Electric Strength)	-	9000	5% discount for BIS
21.16(Resistance to Heat , fire and tracking)	-	10000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

Indian Language Support for Mobile Phones

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	12500		5% discount for BIS
5.2(Message Readability)	-	2500		5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC insulated (Heavy duty) electric cables- For working

26700 View breakup
Rs.16650/-for single core unarmoured cable,Rs.26680/- for two core unarmoured cable,Rs.26700/- for two core armoured cable,Rs.1200/- extra for each additional core (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	800	5% discount for BIS
9.2(INSULATION : Thickness of Insulation)	-	800	5% discount for BIS
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	800	5% discount for BIS
12.2(INNER SHEATH)	-	800	5% discount for BIS
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	800	5% discount for BIS
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	800	5% discount for BIS
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	0	-
13.3(Armouring : Dimensions -Formed wire )	-	0	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	1200	5% discount for BIS
13.5.2(ARMOURING : Resistance)	-	1200	5% discount for BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1250	5% discount for BIS
13.6 b)(ARMOURING: Elongation )	-	1250	5% discount for BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1250	5% discount for BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1250	5% discount for BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	5% discount for BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	5% discount for BIS
13.6 g)(ARMOURING: Resistivity)	-	1200	5% discount for BIS
14.1(OUTER SHEATH)	-	800	5% discount for BIS
14.2(OUTER SHEATH)	-	800	5% discount for BIS
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	800	5% discount for BIS
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	800	5% discount for BIS
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	5% discount for BIS
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1250	5% discount for BIS
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1250	5% discount for BIS
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	1000	5% discount for BIS
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	5% discount for BIS
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	5% discount for BIS
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	5% discount for BIS
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	5% discount for BIS
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1200	5% discount for BIS
15.1 d)1)(Physical tests for sheath : Elongation )	-	1200	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	5% discount for BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1200	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1200	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1200	5% discount for BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1200	5% discount for BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1100	5% discount for BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1100	5% discount for BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1100	5% discount for BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1100	5% discount for BIS
15.1 d)4)(Hot deformation : Insulation )	-	1200	5% discount for BIS
15.1 d)4)(Hot deformation : Sheath )	-	1200	5% discount for BIS
15.1 d)5)( Loss of mass in air oven- Insulation )	-	800	5% discount for BIS
15.1 d)5)( Loss of mass in air oven- sheath )	-	800	5% discount for BIS
15.1 d)6)(Heat shock test- Insulation )	-	1000	5% discount for BIS
15.1 d)6)(Heat shock test- sheath )	-	1000	5% discount for BIS
15.1 d)7)(Thermal stability- insulation )	-	1100	5% discount for BIS
15.1 d)7)(Thermal stability- Sheath )	-	1100	5% discount for BIS
15.1 e)(Insulation resistance test : Volume Resistivity )	-	900	5% discount for BIS
15.1 e)(Insulation resistance test : IR Constant )	-	900	5% discount for BIS
15.1 f)(High voltage test ( water immersion test ))	-	1500	5% discount for BIS
15.1 g)(High voltage test at room temperature)	-	1500	5% discount for BIS
15.1 g)(High voltage test at room temperature)	-	1500	5% discount for BIS
15.4 a)(Cold bend test- Insulation ( Optional test))	-	750	5% discount for BIS
15.4 a)(Cold bend test- Sheath ( Optional test))	-	750	5% discount for BIS
15.4 b)(Cold impact test- Insulation ( Optional test))	-	750	5% discount for BIS
15.4 b)(Cold impact test- Sheath ( Optional test))	-	750	5% discount for BIS
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	5% discount for BIS
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1500	5% discount for BIS
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1500	5% discount for BIS
16.4(Flammability Test)	-	1600	5% discount for BIS
16.5(Oxygen Index Test)	-	1000	5% discount for BIS
16.6(Flame Retardance Test on Single Cables)	-	1000	5% discount for BIS
16.7(Flame Retardance Test on Bunched Cables)	-	1200	5% discount for BIS
16.9(Test for Halogen Acid Gas Evolution)	-	1200	5% discount for BIS
16.1(Temperature Index)	-	1000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-

Complete

19 Mar, 2023

-
-

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

Electric stoves

2275 View breakup
Rs.2275/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
7.1(Marking- IS 302-1)	-	5	5% discount for BIS
7.3(Marking- IS 302-1)	-	5	5% discount for BIS
7.4(Marking- IS 302-1)	-	5	5% discount for BIS
7.6(Marking- IS 302-1)	-	5	5% discount for BIS
7.11(Marking- IS 302-1)	-	5	5% discount for BIS
7.12(Marking- IS 302-1)	-	5	5% discount for BIS
7.13(Marking- IS 302-1)	-	5	5% discount for BIS
7.14(Marking- IS 302-1)	-	5	5% discount for BIS
7.15(Marking- IS 302-1)	-	5	5% discount for BIS
7.101(Marking)	-	5	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	150	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	100	5% discount for BIS
11(Heating, IS 302-1)	-	250	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	125	5% discount for BIS
15.3(Moisture Resistance, IS 302-1)	-	125	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	50	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	50	5% discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	125	5% discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	125	5% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	150	5% discount for BIS
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	50	5% discount for BIS
22(Construction, IS 302-1)	-	6	5% discount for BIS
22.101(Construction)	-	6	5% discount for BIS
22.102(Construction)	-	6	5% discount for BIS
22.103(Construction)	-	6	5% discount for BIS
22.104(Construction)	-	6	5% discount for BIS
22.105(Construction)	-	6	5% discount for BIS
22.106(Construction)	-	6	5% discount for BIS
22.107(Construction)	-	6	5% discount for BIS
23.1(Internal Wiring, IS 302-1)	-	10	5% discount for BIS
23.2(Internal Wiring, IS 302-1)	-	10	5% discount for BIS
23.8(Internal Wiring, IS 302-1)	-	10	5% discount for BIS
23.9(Internal Wiring, IS 302-1)	-	10	5% discount for BIS
23.10(Internal Wiring, IS 302-1)	-	10	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	25	5% discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	25	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	50	5% discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	10	5% discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	10	5% discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	10	5% discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	10	5% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	10	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	50	5% discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	25	5% discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	25	5% discount for BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	88	5% discount for BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	88	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	100	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC Insulated Cables for Working Voltages upto & Includ

6750 View breakup
Rs.4750/- for single core unsheathed cable,Rs.6750/-single core sheathed cable,Rs.4900/- for outdoor use,Rs.6675/- for low temperature condition,Rs.1000/-extra for each additional core. (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	300	5% discount for BIS
10.4(Flammability test- Unaffected portion)	-	700	5% discount for BIS
10.4(Flammability test-Burning after flame removal)	-	700	5% discount for BIS
table 1 e) 3) (IR constant- max. Temp)	-	300	5% discount for BIS
table 1 e) 3) (IR constant- Room temp )	-	300	5% discount for BIS
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	300	5% discount for BIS
table 1 e) 3) (Volume Resistivity - Room temp )	-	300	5% discount for BIS
10.2(HV (room temperature))	-	300	5% discount for BIS
10.1(HV (water immersion))	-	300	5% discount for BIS
10.1(HV (water immersion))	-	300	5% discount for BIS
10.8(Smoke density rating)	-	200	5% discount for BIS
10.6(Halogen evolution)	-	250	5% discount for BIS
10.7(Temperature index)	-	300	5% discount for BIS
10.5(Oxygen index)	-	300	5% discount for BIS
Table 1 iii) d) 9)(Cold impact for sheath)	-	200	5% discount for BIS
Table 1 iii) c) 9)(Cold impact for insulation)	-	200	5% discount for BIS
Table 1 iii) d) 8)(Cold bend for sheath)	-	200	5% discount for BIS
Table 1 iii) c) 8)(Cold bend for insulation)	-	200	5% discount for BIS
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	200	5% discount for BIS
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	200	5% discount for BIS
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	300	5% discount for BIS
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	300	5% discount for BIS
Table 1 iii) d) 5)(Heat shock-Sheath )	-	300	5% discount for BIS
Table 1 iii) c) 5)(Heat shock-Insulation )	-	300	5% discount for BIS
Table 1 iii) d) 4)(Cracks Observed)	-	0	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	200	5% discount for BIS
Table 1 iii) c) 4)(Cracks Observed)	-	0	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	200	5% discount for BIS
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	300	5% discount for BIS
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	300	5% discount for BIS
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	400	5% discount for BIS
Table 1 iii) d) 3)(Sheath- TS variation)	-	400	5% discount for BIS
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	800	5% discount for BIS
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	800	5% discount for BIS
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	400	5% discount for BIS
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	400	5% discount for BIS
5.2(Application )	-	0	-
Table 1 iii) c) 3)(Elongation variation)	-	0	-
Table 1 iii) c) 3)(TS variation)	-	0	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	800	5% discount for BIS
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	800	5% discount for BIS
Table 1 iii) c) 1)(Elongation (Without ageing))	-	400	5% discount for BIS
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	400	5% discount for BIS
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
8.3(Thickness of Sheath)	-	200	5% discount for BIS
5.3(Thickness of Insulation)	-	200	5% discount for BIS
9.1(Ovality)	-	200	5% discount for BIS
9(Overall dimensions)	-	200	5% discount for BIS
10.11(Per sulphate test (for tinned Cu cable only))	-	500	5% discount for BIS
4.2(Conductor resistance test)	-	300	5% discount for BIS
4.1(Wrapping test (for Al))	-	300	5% discount for BIS
4.1(Tensile test (for Al)- After Stranding)	-	400	5% discount for BIS
4.1(Tensile test (for Al)-Before Stranding)	-	400	5% discount for BIS
4.1(Annealing test (for copper))	-	300	5% discount for BIS
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	200	5% discount for BIS
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	0	-
4.4(Joints in Conductor)	-	0	-

Complete

19 Mar, 2023

-
-

IS 13010 (2002)

AC watthour meters, class 0.5, 1 and 2 - Specification (First Revision)

127500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 a)(Marking and Nameplates)	-	0	-
8.1 b)(Marking and Nameplates)	-	0	-
8.1 c)(Marking and Nameplates)	-	0	-
8.1 d)(Marking and Nameplates)	-	0	-
8.1 e)(Marking and Nameplates)	-	0	-
8.1 f)(Marking and Nameplates)	-	0	-
8.1 g)(Marking and Nameplates)	-	0	-
8.1 h)(Marking and Nameplates)	-	0	-
8.1 j)(Marking and Nameplates)	-	0	-
8.1 k)(Marking and Nameplates)	-	0	-
8.1 n)(Marking and Nameplates)	-	0	-
8.1 m)(Marking and Nameplates)	-	0	-
8.1.1(BIS Certlflcation Marking)	-	0	-
8.2.1(Connection Diagram and Terminal Marking)	-	0	-
8.2.2(Connection Diagram and Terminal Marking)	-	0	-
11.2(Insulation Resistance)	-	3000	5% discount for BIS
11.3(Running with No Load)	-	5000	5% discount for BIS
11.4(Starting)	-	5000	5% discount for BIS
11.5(Limits of Errors)	-	2500	5% discount for BIS
11.6(Tests of Meter Constant)	-	3000	5% discount for BIS
11.7( Interpretation of Test Results and Adjustment ( if Required ) )	-	3000	5% discount for BIS
11.8 a)(Power Loss : Voltage Circuits )	-	1500	5% discount for BIS
11.8 b)(Power Loss : Current Circuits )	-	1500	5% discount for BIS
11.9(Heating )	-	5000	5% discount for BIS
11.10.2(Impulse Voltage Test)	-	5000	5% discount for BIS
11.10.2.1(Tests of insulation for circuits and for insulation between the circuits )	-	2500	5% discount for BIS
11.10.2.2(Test of insulation of electric circuits relative to. earth )	-	2500	5% discount for BIS
11.10.3 (ac Voltage Test)	-	2500	5% discount for BIS
11.11 a)(Effect of Influence Quantities )	-	1000	5% discount for BIS
11.11 b)(Effect of Influence Quantities )	-	1000	5% discount for BIS
11.11 c)(Effect of Influence Quantities )	-	1000	5% discount for BIS
11.11 d)(Effect of Influence Quantities )	-	1000	5% discount for BIS
11.11 e)(Effect of Influence Quantities )	-	4000	5% discount for BIS
11.11 f)(Effect of Influence Quantities )	-	2500	5% discount for BIS
11.11 g)(Effect of Influence Quantities )	-	1500	5% discount for BIS
11.11 h)(Effect of Influence Quantities )	-	4000	5% discount for BIS
11.11 i)(Effect of Influence Quantities )	-	1500	5% discount for BIS
11.12(Short-Time Over Currents)	-	3000	5% discount for BIS
11.13(Effect of Self-Heating )	-	4000	5% discount for BIS
11.14(Range of Adjustment)	-	3000	5% discount for BIS
11.15.1 (low load adjustment)	-	1500	5% discount for BIS
11.15.2(Inductive Load Adjustment)	-	1500	5% discount for BIS
11.16.1( Sustained Accuracy Test)	-	3000	5% discount for BIS
11.17(Running at Low Load)	-	3000	5% discount for BIS
11.18(Test on Material Used in the Dial)	-	2500	5% discount for BIS
11.19(Repeatability of Error Test ( Type Test) )	-	1500	5% discount for BIS
11.20 a)(Vibration Test )	-	1500	5% discount for BIS
11.20 b)(Vibration Test )	-	1500	5% discount for BIS
11.20 c)(Vibration Test )	-	1500	5% discount for BIS
11.20 d)(Vibration Test )	-	1500	5% discount for BIS
11.20 e)(Vibration Test )	-	1500	5% discount for BIS
11.21(Shock Test)	-	5000	5% discount for BIS
11.22(Driving Torque Measurement Test”)	-	3000	5% discount for BIS
11.23(Test of Resistance to Heat and Fire)	-	5000	5% discount for BIS
11.24 a)(Protection against penetration of dust)	-	1000	5% discount for BIS
11.24 a)(Protection against penetration of dust)	-	1500	5% discount for BIS
11.24 a)(Protection against penetration of dust)	-	1500	5% discount for BIS
11.24 b)(Protection against penetration of water )	-	3500	5% discount for BIS
11.25(Mechanical Strength of Meter Case)	-	3000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 15111 : Part 2 (2002)

Self ballasted lamps for general lighting services: Part 2 performance requirements

Self Ballasted Lamps for General Lighting Services

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	1500	5% discount for BIS
8.1(STARTING AND RUN-UP)	-	1000	5% discount for BIS
8.2(STARTING AND RUN-UP)	-	1000	5% discount for BIS
9(Lamp Wattage)	-	2500	5% discount for BIS
10(Luminous Flux)	-	2500	5% discount for BIS
11(Colour)	-	3500	5% discount for BIS
12(LUMEN MAINTENANCE)	-	10000	5% discount for BIS
13.1(Life)	-	17500	5% discount for BIS
14(Harmonics)	-	3000	5% discount for BIS
15(Lamp Efficacy)	-	2500	5% discount for BIS
16(Power factor)	-	2500	5% discount for BIS
13.2(Life)	-	17500	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 15111 : PART 1 AND PART 2 (2002)

Self ballasted lamps for general lighting services: Part 1 safety requirements

Compact Fluorescent Lamp

35000 View breakup
Rs. 35000/-(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	125	5% discount for BIS
6.2(Marking)	-	125	5% discount for BIS
6.3(Marking)	-	125	5% discount for BIS
6.4(BIS Certification Marking)	-	125	5% discount for BIS
7(Interchangeability )	-	3000	5% discount for BIS
8(Protection against electric shock)	-	2500	5% discount for BIS
9.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH After HUMIDIT’Y TREATMENT)	-	5000	5% discount for BIS
9.2(The insulation resistance of B 22 caps between shell and contact shall be not less than 5 MΩ When measure with a 500 voltage DC.)	-	2500	5% discount for BIS
9.3(Electric Strength)	-	2500	5% discount for BIS
10(Mechanical strength test )	-	2000	5% discount for BIS
11(Cap Temperature rise test )	-	3000	5% discount for BIS
12(Resistance to heat)	-	5000	5% discount for BIS
13(Resistance to Flame and Ignition)	-	7000	5% discount for BIS
14(Fault Conditions)	-	1750	5% discount for BIS
15(Mercury Content )	-	250	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 418 (2004)

Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)

Tungsten Filament Lamp (Bulb)

72000 View breakup
At rated voltage Upto 25W:Rs.38500/-,Upto 40W: Rs.40000/-,Upto 60W:Rs.45000/-,Upto 100W:Rs.72000/-,Upto 200W:Rs.120000/-, At 110% voltage Upto 25W-Rs.25000/-,Upto 40W-Rs.27000/-, Upto 60W-Rs.31000/-,Upto 100W-Rs.45000/-, Upto 200W-Rs.72000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking, IS 418)	-	500	5% discount for BIS
7.1(Lamp Dimensions, IS 418:2004)	-	7500	5% discount for BIS
7.2(Lamp Dimensions, IS 418:2004)	-	7500	5% discount for BIS
8.1(Wattage, IS 418)	-	5000	5% discount for BIS
8.2.1(Luminous Flux Initial, IS 418)	-	5000	5% discount for BIS
8.2.2(Luminous Flux Initial, IS 418)	-	5000	5% discount for BIS
9(Lumen Maintenance, IS 418)	-	15000	5% discount for BIS
10.1(Life Test Requirements, IS 418)	-	20000	5% discount for BIS
10.2(Life Test Requirements, IS 418)	-	20000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 15549 (2005)

Stationary valve regulated lead acid batteries - Specification

Stationary Valve Regulated Lead Acid (VRLA) Batteries.

220500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Rating )	-	0	-
7.2(Designation of Cells)	-	0	-
7.3(Standard Cell Capacities)	-	0	-
7.4(Information to be Furnished by Purchaser with Enquiry/Order)	-	0	-
7.5(Information to be Furnished by the Battery Supplier)	-	0	-
8(Markings on Cell)	-	500	-
9(Temperature for Tests)	-	0	-
12.1(Test for C 10 Capacity)	-	12500	-
12.2(Test for C 1 Capacity)	-	17500	-
12.3(Capacity Test at Other Discharge Rates)	-	22500	-
12.4(Ampere Hour Efficiency)	-	7500	-
12.5(Watt Hour Efficiency)	-	7500	-
12.6(Test for Retention of Charge)	-	12500	-
12.7 & Annex B(Test on Separators)	-	12500	-
12.8(Test for Vent Seal Operation)	-	12500	-
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	15000	-
12.1(Endurance Life Cycle Test)	-	100000	-

Complete

19 Mar, 2023

-
-

IS 15627 (2005)

Automotive vehicles - Pneumatic tyres i?or two and three - Wheeled motor vehicles - Specification

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex C Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	2000	-
4/4.2.1 /4.2.2/4.2.3,Annex E ,Table 12(Load/Speed Performance Test)	-	12500	-
4/4.3 Refer Annex F,Table 13(Dynamic Growth of~Tyres)	-	12500	-
4.4,Refer Table 14 to 16 and Annex G(Tyre Strength Test (Plunger Test) )	-	10000	-
4.5 refer Table 17 and Annex H(Endurance Test)	-	25000	-
4.6/4.6.1(Tread Wear Indicators)	-	1500	-
5(Markings)	-	1500	-
4/4.1.1.2- Refer Annex C Col 2 and Annex D(test method )(Tyre outer diameter)	-	2000	-
4/4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	12500	-
4.6.2 Refer Annex D(Method of measurement)(Tread Wear Indicators)	-	1500	-
4.6.3(Tread Wear Indicators)	-	1500	-

Complete

19 Mar, 2023

-
-

IS 15633 (2005)

Automotive vehicles - Pneumatic tyres for passenger car vehicles - Diagonal and radial ply - Specification

Tyres for passenger car vehicle

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex B Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	2500	-
4/4.2.1 /4.2.2/4.2.3,Refer Annex D ,Table 13(Load/Speed Performance Test)	-	17000	-
4.3/4.3.1/4.3.2 Refer Annex E and Table 14( Endurance Test)	-	32500	-
4.4/4.4.1/4.4.2 Refer Annex F and Table 15 and 16(Bead Unseating Resistance Test for Tubeless Tyre )	-	17500	-
4.5/4.5.1(Tread-Wear -Indicators)	-	1500	-
4.6. Refer Annex G ,Table 17 and 18(Tyre.Strength Test)	-	12500	-
4/4.1.1.2- Refer Annex B Col 2 and Annex D(test method )(Tyre outer diameter)	-	2500	-
4.2.4(Outer diameter of the .tyre after the 6 hrs of the Load/Speed Performance Test shall not differ from the outer diameter measured before the test by more than + 3.5 percent.)	-	17000	-
4.4.3( In the case of the tyre of which the load capability index is not marked, it shall be classified according to the mzximum load capability corresponding to load capability index.)	-	17500	-
4.5.1(Tread-Wear -Indicators)	-	1500	-
4.5.2(Each tread-wear indicator shall individually provide a means of indicating with a tolerance of +0.60 ,−0.00 mm when the tread grooves are no longer more than 1.6 mm deep.’)	-	1500	-
4.5. Refer Annex C(Tread wear indicator measurement )	-	1500	-
5(Markings)	-	1500	-

Complete

19 Mar, 2023

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Safety of Household & Similar Electrical Appliances – P

60000 View breakup
Rs.60000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	5% discount for BIS
8.1.1(Protection against live parts in all positions)	-	250	5% discount for BIS
8.1.2(Protection against live parts in openings)	-	250	5% discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	250	5% discount for BIS
8.1.4(Protection against live parts against protective impedance)	-	250	5% discount for BIS
10.1(Power input)	-	1250	5% discount for BIS
10.2(Current input)	-	1250	5% discount for BIS
11.1(General)	-	670	5% discount for BIS
11.2(General)	-	670	5% discount for BIS
11.3(Heating)	-	670	5% discount for BIS
13.1(General)	-	670	5% discount for BIS
13.2(Leakage current at operating temperature)	-	670	5% discount for BIS
13.3(Electric Strength at operating temperature)	-	670	5% discount for BIS
14(Transient Over Voltages)	-	2500	5% discount for BIS
15.0(General)	-	875	5% discount for BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	875	5% discount for BIS
15.2(Spillage Test)	-	875	5% discount for BIS
15.3(Humidity Test)	-	875	5% discount for BIS
16.0(General)	-	375	5% discount for BIS
16.1(General)	-	375	5% discount for BIS
16.2(Leakage Current (after Clause 15))	-	375	5% discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	375	5% discount for BIS
17(Over Load Protection of Transformers and associated circuits)	-	500	5% discount for BIS
18(Endurance Test requirements and tests)	-	6000	5% discount for BIS
19(Abnormal Operation)	-	17500	5% discount for BIS
20(Stability test)	-	1500	5% discount for BIS
21(Mechanical Strength Test)	-	2000	5% discount for BIS
22(Construction verification related test)	-	5000	5% discount for BIS
23(General)	-	1000	5% discount for BIS
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	800	5% discount for BIS
26(Terminals for external conductors)	-	1500	5% discount for BIS
27(Provision for earthing)	-	200	5% discount for BIS
28(Screw test and connections)	-	500	5% discount for BIS
29(clearance, creepage distances and solid insulation)	-	500	5% discount for BIS
30.1(Ball pressure test)	-	500	5% discount for BIS
30.2(Glow Wire Test)	-	500	5% discount for BIS
30.2(Needle Flame Test)	-	500	5% discount for BIS
31(Resistance to Rusting)	-	2000	5% discount for BIS
32(Radiation Toxicity and Similar Hazards)	-	3000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

Hand blender, Food processor, Food Mixers, Juicers, Kni

30000 View breakup
Rs.30000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	5% discount for BIS
7.1(Marking- IS 302-1)	-	25	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	250	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	750	5% discount for BIS
11(Heating, IS 302-1)	-	750	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	350	5% discount for BIS
14(Transient Over Voltages, IS 302-1)	-	1000	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	500	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	5% discount for BIS
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	5% discount for BIS
19.7(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	42	5% discount for BIS
21.1(Mechanical Strength, IS 302-1)	-	350	5% discount for BIS
22.1(Construction, IS 302-1)	-	750	5% discount for BIS
23.1(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
24.1(Components, IS 302-1)	-	50	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	250	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	1000	5% discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	40	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% discount for BIS
30.1(Resistance to Heat and Fire, IS 302-1)	-	900	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	1500	5% discount for BIS
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	2000	5% discount for BIS
7.3(Marking- IS 302-1)	-	25	5% discount for BIS
7.4(Marking- IS 302-1)	-	25	5% discount for BIS
7.6(Marking- IS 302-1)	-	25	5% discount for BIS
7.7(Marking- IS 302-1)	-	25	5% discount for BIS
7.8(Marking- IS 302-1)	-	25	5% discount for BIS
7.11(Marking- IS 302-1)	-	25	5% discount for BIS
7.12(Marking- IS 302-1)	-	25	5% discount for BIS
7.13(Marking- IS 302-1)	-	25	5% discount for BIS
7.14(Marking- IS 302-1)	-	25	5% discount for BIS
7.15(Marking- IS 302-1)	-	25	5% discount for BIS
7.101(Marking)	-	25	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	350	5% discount for BIS
15(Moisture Resistance, IS 302-1)	-	500	5% discount for BIS
15.2(Moisture Resistance, IS 302-1)	-	500	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	5% discount for BIS
19.1(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19.8(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19.9(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19.101(Abnormal Operation)	-	1200	5% discount for BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	42	5% discount for BIS
20.101(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.102(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.103(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.104(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.105(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.106(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.107(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.108(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.109(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.110(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.111(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.112(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.113(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.114(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.115(Stability & Mechanical Hazards)	-	42	5% discount for BIS
20.116(Stability & Mechanical Hazards)	-	42	5% discount for BIS
21.2(Mechanical Strength, IS 302-1)	-	350	5% discount for BIS
22.102(Construction)	-	750	5% discount for BIS
23.2(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.3(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.4(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.5(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.6(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.7(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.8(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.9(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
23.10(Internal Wiring, IS 302-1)	-	75	5% discount for BIS
24.2(Components, IS 302-1)	-	50	5% discount for BIS
24.5(Components, IS 302-1)	-	50	5% discount for BIS
24.6(Components, IS 302-1)	-	50	5% discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	250	5% discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	40	5% discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	40	5% discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	40	5% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	40	5% discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	250	5% discount for BIS
30.2(Resistance to Heat and Fire, IS 302-1 disable)	-	900	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 302 : Part 2 : Sec 7 (2010)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 7 domestic electric clothes washing machines (First Revision)

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	200	-
7(Marking)	-	300	-
8(Protection against access to live parts)	-	1000	-
10(Power Input & Current )	-	1500	-
11(Temperature Rise/ Heating)	-	2000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	3500	-
14(Transient Over Voltage)	-	4500	-
15(Moisture Resistance)	-	4500	-
16(Leakage Current and Electric Strength)	-	3500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1500	-
18(Endurance)	-	3200	-
19(Abnormal Operation)	-	5800	-
20(Stability & Mechanical Hazards)	-	1200	-
21(Mechanical strength)	-	2800	-
22(Construction)	-	5000	-
23(Internal wiring)	-	1000	-
24(Components)	-	0	-
25(Supply Connection & External Flexible Cords)	-	1500	-
26(Terminals For External Conductors)	-	1000	-
27(Provision For Earthing)	-	1000	-
28(Screws & Connections)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1500	-
30(Resistance to Heat & Fire)	-	2000	-
31(Resistance to Rusting)	-	1250	-
32(Radiation ,Toxicity and similar hazards)	-	1250	-

Complete

19 Mar, 2023

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Information technology equipment–Safety –Part 1:General

52500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2500	5% discount for BIS
1.6(Power interface .)	-	5000	5% discount for BIS
1.7(Markings and instructions)	-	2500	5% discount for BIS
2.1(Protection from electric shock and energy hazards)	-	500	5% discount for BIS
2.2(SELV circuits)	-	500	5% discount for BIS
2.3(TNV circuits)	-	500	5% discount for BIS
2.4(Limited current circuits)	-	500	5% discount for BIS
2.5(Limited power sources .)	-	500	5% discount for BIS
2.6(Provisions for earthing and bonding)	-	500	5% discount for BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	5% discount for BIS
2.8(Safety interlocks)	-	500	5% discount for BIS
2.9(Electrical insulation)	-	500	5% discount for BIS
2.10(Clearances, creepage distances and distances through insulation)	-	500	5% discount for BIS
3.1(General)	-	3500	5% discount for BIS
3.2(Connection to a mains supply)	-	3500	5% discount for BIS
3.3(Wiring terminals for connection of external conductors)	-	1000	5% discount for BIS
3.4(Disconnection from the mains supply)	-	1000	5% discount for BIS
3.5(Interconnection of equipment)	-	1000	5% discount for BIS
4.1(Stability)	-	2000	5% discount for BIS
4.2(Mechanical strength)	-	3000	5% discount for BIS
4.3(Design and construction)	-	1000	5% discount for BIS
4.4(Protection against hazardous moving parts)	-	1000	5% discount for BIS
4.5(Thermal requirements)	-	1000	5% discount for BIS
4.6(Openings in enclosures)	-	1000	5% discount for BIS
4.7(Resistance to fire)	-	1000	5% discount for BIS
5.1(Touch current and protective conductor curren)	-	5000	5% discount for BIS
5.2(Electric strength)	-	2500	5% discount for BIS
5.3(Abnormal operating and fault conditions)	-	2500	5% discount for BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	5% discount for BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2000	5% discount for BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	5% discount for BIS
7.1(General)	-	500	5% discount for BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	5% discount for BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	5% discount for BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	5% discount for BIS

Complete

19 Mar, 2023

-
-

IS 14286 (2010)

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision)

Crystalline Silicon Terrestrial Photovoltaic Module

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	NA
10.1(Visual inspection)	-	2000	5% discount for BIS
10.2(Maximum power determination)	-	5000	5% discount for BIS
10.3(Insulation test)	-	3000	5% discount for BIS
10.4(Measurement of temperature coefficients)	-	10000	5% discount for BIS
10.5(Measurement of NOCT)	-	5000	5% discount for BIS
10.6(Performance at STC and NOCT)	-	9000	5% discount for BIS
10.7(Performance at low irradiance)	-	5000	5% discount for BIS
10.8(Outdoor exposure test)	-	8000	5% discount for BIS
10.9(Hot-spot endurance test)	-	10000	5% discount for BIS
10.10(UV preconditioning)	-	55000	5% discount for BIS
10.11(Thermal cycling test)	-	305000	5% discount for BIS
10.12(Humidity freeze test)	-	95000	5% discount for BIS
10.13(Damp heat test)	-	200000	5% discount for BIS
10.14(Robustness of termination test)	-	5000	5% discount for BIS
10.15(Wet leakage current test)	-	6000	5% discount for BIS
10.16(Mechanical load test)	-	12000	5% discount for BIS
10.17(Hail test)	-	8000	5% discount for BIS
10.18(Bypass diode thermal' test)	-	7000	5% discount for BIS

Complete

19 Mar, 2023

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 1474 Haryana

1474, HSIIDC Rai Industrial Estate, SONIPAT, Sonipat, Haryana, 131001

9310314585 [email protected]

Scope List