BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List

Reset

155 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

121

IS 15905 (2011)

Hubless centrifugally cast (Spun) iron pipes, fittings and accessories - Spigot series - Specification

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(shall conform to FG 150 grade,appropriate, specified in IS 210.)	-	1500	-
5.3(Hardness )	-	1000	-
7.1(Visual Inspection and Hammer Test)	-	250	-
8.1(Crushing Strength )	-	1500	-
9.1(Hydraustatic Test)	-	2500	-
10.1(External Diameter)	-	100	-
10.2, Table 3, Sl no. I to IV(Pipe Thickness)	-	100	-
10.2 , Table 3, Sl no. I to IV(Fittings Thickness)	-	100	-
10.3(Length)	-	100	-
10.5(Masses)	-	100	-
11.2.1, 11.2.2, Table 4 and 5, Sl no. Ito V(Nominal Size (DN))	-	100	-
11.2.1, 11.2.2, Table 4 and 5, Sl no. I to V(a)	-	100	-
11.2.3, Table 6, Sl no. I to IV(Nominal Size (DN 1))	-	100	-
11.2.3, Table 6, Sl no. I to IV(a)	-	100	-
11.2.3, Table 6, Sl no. I to IV(r)	-	100	-
11.2.4, Table 7, Sl no. I to V(Nominal Size (DN 1))	-	100	-
11.2.4, Table 7, Sl no. I to V(a)	-	100	-
11.2.4, Table 7, Sl no. I to V(b)	-	100	-
11.2.5, Table 8, Sl no. I to II(Nominal Size (DN 1))	-	100	-
11.2.5, Table 8, Sl no. I to II(Nominal Size (DN 2))	-	100	-
11.2.5, Table 8, Sl no. I to II(a)	-	100	-
11.2.5, Table 8, Sl no. I to II(r)	-	100	-
11.2.5, Table 8, Sl no. I to II(b)	-	100	-
11.2.5, Table 8, Sl no. I to II(c )	-	100	-
11.2.5, Table 8, Sl no. I to II(d)	-	100	-
11.2.6, Table 9, Sl no. I to II(Nominal Size (DN ))	-	100	-
11.2.6, Table 9, Sl no. I to II(a)	-	100	-
11.2.6, Table 9, Sl no. I to II(b)	-	100	-
11.2.6, Table 9, Sl no. I to II(c)	-	100	-
11.2.6, Table 9, Sl no. I to II(r)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 1))	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (Nominal Size (DN 2))	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (L)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (a)	-	100	-
11.2.7, 11.2.8, 11.2.9, 11.2.10 Table 10,11,12 & 13 (b)	-	100	-
11.2.11, Table 14, (Nominal Size (DN 1))	-	100	-
11.2.11, Table 14, (Nominal Size (DN 2))	-	100	-
11.2.11, Table 14, ( L)	-	100	-
11.2.12, Table 15(Nominal Size (DN ))	-	100	-
11.2.12, Table 15(L)	-	100	-
11.2.12, Table 15(a)	-	100	-
11.2.12, Table 15(b)	-	100	-
11.2.13, Table 16(Nominal Size (DN 1))	-	100	-
11.2.13, Table 16(Nominal Size (DN 2))	-	100	-
11.2.13, Table 16(L)	-	100	-
11.2.13, Table 16(a)	-	100	-
11.2.13, Table 16(b)	-	100	-
11.2.13, Table 16(c)	-	100	-
11.2.13, Table 16(d)	-	100	-
11.2.13, Table 16(r)	-	100	-
11.2.14, Table 17,(Nominal Size (DN ))	-	100	-
11.2.14, Table 17,(a)	-	100	-
11.2.14, Table 17,(b)	-	100	-
11.2.14, Table 17,(b)	-	100	-
11.2.14, Table 17,(r)	-	100	-
11.2.14, Table 17,(j)	-	100	-
11.2.14, Table 17,(k)	-	100	-
11.2.14, Table 17,(d)	-	100	-
11.2.15, Table 18,(Nominal Size (DN 1))	-	100	-
11.2.15, Table 18,(Nominal Size (DN 2))	-	100	-
11.2.15, Table 18,(L)	-	100	-
11.2.15, Table 18,(a)	-	100	-
11.2.15, Table 18,(b)	-	100	-
11.2.15, Table 18,(c)	-	100	-
11.2.15, Table 18,(d)	-	100	-
11.2.15, Table 18,(e )	-	100	-
11.2.15, Table 18,(f )	-	100	-
11.2.15, Table 18,(g)	-	100	-
11.2.16, Table 19, (Nominal Size (DN 1))	-	100	-
11.2.16, Table 19, (Nominal Size (DN 2))	-	100	-
11.2.16, Table 19, (L)	-	100	-
11.2.16, Table 19, (a)	-	100	-
11.2.16, Table 19, (b)	-	100	-
11.2.16, Table 19, (c)	-	100	-
11.2.16, Table 19, (d)	-	100	-
11.2.17, Table 20, (Nominal Size (DN 1))	-	100	-
11.2.17, Table 20, (Nominal Size (DN 2))	-	100	-
11.2.17, Table 20, (L)	-	100	-
11.2.17, Table 20, (a)	-	100	-
11.2.17, Table 20, (b)	-	100	-
11.2.17, Table 20, (c)	-	100	-
11.2.17, Table 20, (d)	-	100	-
11.2.18, Table 21, (Nominal Size (DN ))	-	100	-
11.2.18, Table 21, (L)	-	100	-
11.2.18, Table 21, (a)	-	100	-
11.2.18, Table 21, (b)	-	100	-
11.2.19, Table 22, (Nominal Size (DN ))	-	100	-
11.2.19, Table 22, (L)	-	100	-
11.2.19, Table 22, (c)	-	100	-
11.2.19, Table 22, (d)	-	100	-
Cl. A-1, Table 23, (Nominal Size (DN ))	-	100	-
Cl. A-1, Table 23, (Outside Dia (D))	-	100	-
Cl. A-1, Table 23, (Thickness (I))	-	100	-
Cl. A-1, Table 23, (Height (H))	-	100	-
Cl. A-2, Table 24, (Nominal Size (DN ))	-	100	-
12.1 to 12.5(Coating )	-	100	-

Complete

17 Jun, 2024

-
-

122

IS 14246 (2013)

Continuously pre-painted galvanized steel sheets and coils (First Revision)

12750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.2(Workmanship)	-	500	NA
Cl 4.1(Workmanship)	-	500	NA
Cl 6.2(Press)	-	500	NA
Cl 6.4(Load Resistance)	-	500	NA
Cl 6.5(Cross Hatch)	-	500	NA
Cl 8(Salt Spray)	-	5000	NA
Cl 9(Length, Width, Thickness & Mass)	-	500	NA
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	500	NA
Cl 4.3(Workmanship)	-	2000	NA
Cl 6.3(HWB)	-	500	NA
Cl. 7.3.1(Gloss Bottom Coat)	-	500	-
Cl. 7.3.1(Gloss Top Coat)	-	500	-
Cl. 7.3.2 Table 3(Color Bottom Coat)	-	500	-
Cl. 7.3.2 Table 3(Color Top Coat)	-	500	-

Complete

17 Jun, 2024

-
-

123

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

7500 View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	100	NA
4(Material)	-	5400	NA
6.1 & Table 1( i) Name of Utensil )	-	100	NA
6.1 & Table 1(ii) Shape of Utensil)	-	100	NA
6.1 & Table 1( Nominal Size, mm)	-	100	NA
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	100	NA
6.1 & Table 1(Outside dia Ф NA)	-	100	NA
6.1 & Table 1(Height NA)	-	100	NA
6.1 & Table 1(Capacity, l NA)	-	100	NA
6.1( Minimum sheet thickness for nominal size )	-	100	NA
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	150	NA
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	150	NA
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	200	NA
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	200	NA
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	200	NA
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	200	NA
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	200	NA
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	200	NA
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	200	NA
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	200	NA
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	300	NA

Complete

17 Jun, 2024

-
0.0

124

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	300	NA
7.1(Manganese %)	-	300	NA
7.1(Sulphur %)	-	300	NA
7.1(Phosphorus %)	-	300	NA
7.1(CE)	-	300	NA
7.1(Silicon %)	-	300	NA
7.1( Nitrogen%)	-	1000	NA
7.1( Aluminium %)	-	300	NA
7.1( Nb)	-	300	NA
7.1( Ti)	-	300	NA
7.1(V)	-	300	NA
7.1( Copper %)	-	300	NA
7.1(Cr)	-	300	NA
7.1(Mo)	-	300	NA
7.1(Ni)	-	300	NA
Cl 8 & Table 3(UTM)	-	2000	NA
Cl 9(Press)	-	500	NA
Cl 11(Workmanship)	-	300	NA
Cl 12 & 13(Length, Width & Thickness)	-	700	NA

Complete

17 Jun, 2024

-
-

125

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 10.3(UTM)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 11.3(Press)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 12(Sudden Load Applied)	-	2800	For BIS Samples: 1.5 times of BIS testing charges
Cl 15(Length, Width & Thickness)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 18(Weight)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Depth)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Camber)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

126

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Deformations and Surface Characteristics)	-	8500	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1(Length, Width & Thickness)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2(Weight)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl 8.1(UTM)	-	2300	For BIS samples: 1.5 times of BIS testing charges
Cl 9.3(Load In One Direction)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 9.4(Load In Other Direction From Bend)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl 9.4(Load In Other Direction From Bend)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl 5(Deformations and Surface Characteristics)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 6.1(Nominal Size)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1(Length, Width & Thickness)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 7.2 Table -2 (Nominal Mass)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 8.1 Table 3(Tensile Strength (TS))	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl. 9.3, Table 4(Bend Test )	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	100	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

127

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

9000 View breakup
Rs.9000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	1500	NA
Cl 10.1(Manufacturing )	-	500	NA
Cl 10.1.1(Manufacturing )	-	500	NA
Cl 12(Workmanship)	-	500	NA
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	3500	NA
Cl 15(Workmanship)	-	500	NA

Complete

17 Jun, 2024

-
0.0

128

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl 7(Workmanship)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl 8(Workmanship)	-	750	For BIS Samples: 1.5 times of BIS testing charges
Cl 9(Workmanship)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2850	For BIS Samples: 1.5 times of BIS testing charges
Cl 13(Workmanship)	-	300	For BIS Samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

129

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

9500 View breakup
Rs.9500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	400	NA
6.1(Manganese %)	-	400	NA
6.1(Sulphur %)	-	400	NA
6.1(Phosphorus %)	-	400	NA
6.1(V)	-	400	NA
6.1( Nb)	-	400	NA
6.1( Copper %)	-	400	NA
6.1( Nitrogen%)	-	1000	NA
6.1(Silicon %)	-	400	NA
6.1( Aluminium %)	-	400	NA
6.1( Ti)	-	400	NA
6.1(Cr)	-	400	NA
6.1(Mo)	-	400	NA
6.1(Ni)	-	400	NA
Cl 8(UTM)	-	2000	NA
Cl 9(Press)	-	500	NA
Cl 10(Die Press)	-	1000	NA
Cl 12(Workmanship)	-	300	NA
Cl 13(Length, Width & Thickness)	-	400	NA

Complete

17 Jun, 2024

-
0.0

130

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.7000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	600	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	800	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	600	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
0.0

131

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

5250 View breakup
Rs.5250.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	250	NA
6.1(Manganese %)	-	250	NA
6.1(Sulphur %)	-	250	NA
6.1(Phosphorus %)	-	250	NA
6.1( Nitrogen%)	-	1000	NA
6.1(Silicon %)	-	250	NA
6.1( Aluminium %)	-	250	NA
6.1(V)	-	250	NA
6.1( Ti)	-	250	NA
6.1( Copper %)	-	250	NA
6.1( Nb)	-	250	NA
6.1(Boron)	-	250	NA
Cl 8(Workmanship)	-	500	NA
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	NA

Complete

17 Jun, 2024

-
0.0

132

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	NA
Clause 3.1.1(Phosphorus)	-	500	NA
Cl 4.1(Workmanship)	-	500	NA
Cl 5 & 6(Diameter)	-	1000	NA
Cl 7(UTM)	-	3000	NA
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	NA

Complete

17 Jun, 2024

-
0.0

133

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1(Diameter)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Diameter & Ovality)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Weight)	-	100	For BIS samples: 1.5 times of BIS testing charges.
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1800	For BIS samples: 1.5 times of BIS testing charges.
Cl 9.3(Press)	-	400	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1( CARBON)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(SULPHUR)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(PHOSPHURS)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(MANGANESE)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(SILICON)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1( ALUMINIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Nickel)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Chromium)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Molybdenum)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(NIOBIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.2(VANADIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.3(TITANIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.1(Workmanship)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Diameter & Ovality)	-	400	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Weight)	-	100	For BIS samples: 1.5 times of BIS testing charges.
Cl 8(Physical Requirements)	-	1800	For BIS samples: 1.5 times of BIS testing charges.
Cl 9.3(Press)	-	400	For BIS samples: 1.5 times of BIS testing charges.

Complete

17 Jun, 2024

-
-

134

IS 14724 (1999)

Water purifiers with Ultra - Violet disinfection - Specification

19500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.19500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Workmanship)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl 5(Power Supply, Maximum Rate of Flow, Electrical Safety, Materials of Construction, Safety Against UV Exposure, Indicating Lights & In-Bullt Protections and Ease of Operation)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 6(Leakage-Tightness & Verification of Guarantees of Performance)	-	4000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.1(Test for turbidity (IS 3025 Part 10))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.2(Test for supended particles)	-	500	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.4(Test for adsorption of activated carbon (IS 3025 Part 5))	-	3000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.3(Test for Microbiology - Annex A)	-	8000	For BIS Samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
0.0

135

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table-1(Sulphur)	-	250	NA
Clause 6.1, Table-1(Phosphorus)	-	250	NA
6.2(Phosphorus %)	-	250	NA
6.2(Sulphur %)	-	250	NA
6.2( Nitrogen%)	-	1000	NA
7(Dimensions)	-	200	NA
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	700	NA
8.2(Mechanical Properties (as per IS 1717))	-	400	NA
8.3(Mechanical Properties (as per IS 1755))	-	400	NA
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	400	NA
9.1(Galvanizing Requirements )	-	500	NA
9.2(Galvanizing Requirements )	-	500	NA
9.3(Galvanizing Requirements )	-	400	NA
11(Freedom from defects)	-	200	NA

Complete

17 Jun, 2024

-
-

136

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

8500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	NA
8.2, Table 3(Tensile Test-1608:Part 1)	-	800	NA
8.2, Table 3(Proof Stress, N/mm2)	-	600	NA
8.2, Table 3(Elongation, %)	-	600	NA
8.4(Bend Test)	-	500	NA
8.5(Erichsen Cupping Test)	-	900	NA
10.1(Thickness, mm)	-	100	NA
10.2(width, mm)	-	100	NA
10.3(Length, mm)	-	100	NA
10.4(Flatness,mm)	-	100	NA
10.5(Camber, mm)	-	100	NA
11(Surface Finish)	-	200	NA
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	500	NA

Complete

17 Jun, 2024

-
0.0

137

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

9000 View breakup
Rs.9000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	500	NA
8.1 Table 2 Table 3(Manganese Content IS 228)	-	500	NA
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	500	NA
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	500	NA
8.1(CE)	-	100	NA
9.3(Guided bend test(For SAW Pipes))	-	500	NA
11.1, Table 5.(Outside Diameter (OD))	-	100	NA
11.1, Table 5.(Thickness)	-	100	NA
11.1, Table 5.(Mass)	-	100	NA
14.1(Visual inspection, Appearance and Workmanship)	-	50	NA
14.2(Visual inspection, Appearance and Workmanship)	-	50	NA
14.3(Visual inspection, Appearance and Workmanship)	-	50	NA
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	100	NA

Complete

17 Jun, 2024

-
0.0

138

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

4500 View breakup
Rs.4500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	300	N.A.
Cl 9(Tensile Test On UTM)	-	1000	N.A.
Cl 11(Workmanship)	-	700	N.A.
Cl 13(Workmanship)	-	100	N.A.

Complete

17 Jun, 2024

-
-

139

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

5000 View breakup
Rs.5000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	NA
6.1(Manganese %)	-	500	NA
6.1(Phosphorus %)	-	500	NA
6.1(Sulphur %)	-	500	NA
6.1(Silicon %)	-	500	NA
6.1( Aluminium %)	-	500	NA
Cl 8(Workmanship)	-	500	NA
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	NA

Complete

17 Jun, 2024

-
0.0

140

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	NA
6(Freedom From Defects)	-	200	NA
9.3(Tensile Test-1608:Part 1)	-	900	NA
9.3, Table 3 (Yield Strength, Mpa)	-	800	NA
9.3, Table 3 (Elongation, %)	-	800	NA
11(Surface finish)	-	300	NA
14.1(Thickness,mm)	-	200	NA
14.2( Width, mm)	-	200	NA
14.3(Length, mm)	-	200	NA
14.5(Camber, mm)	-	200	NA
14.4(Flatness, mm)	-	200	NA

Complete

17 Jun, 2024

-
-

141

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

6500 View breakup
Rs.6500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	2000	NA
Cl 9(Press)	-	400	NA
Cl 10(Sudden Load Applied)	-	1500	NA
Cl 11(Expansion Test)	-	200	NA
Cl 13(Workmanship)	-	100	NA
Cl 15(Length, Width & Thickness)	-	400	NA
7.1(Carbon %)	-	250	NA
7.1(Manganese %)	-	250	NA
7.1(Sulphur %)	-	250	NA
7.1(Phosphorus %)	-	250	NA
7.1(CE)	-	200	NA
7.1( Nitrogen%)	-	500	NA
7.1(Silicon %)	-	250	NA
7.1( Aluminium %)	-	250	NA
7.1( Nb)	-	250	NA
7.1(V)	-	250	NA
7.1( Ti)	-	250	NA
7.1( Copper %)	-	250	NA
7.1(Cr)	-	250	NA
7.1(Mo)	-	250	NA
7.1(Ni)	-	250	NA

Complete

17 Jun, 2024

-
0.0

142

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	NA
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	NA
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	70	NA
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	70	NA
Cl. 10.1, 14.1, 18.1(Straightness)	-	70	NA
Cl. 10.2, Fig 1(Outside dimension (B))	-	70	NA
Cl. 10.2, Fig 1(Outside dimension (H))	-	70	NA
Cl. 10.2, Fig 1(Outside dimension (T))	-	70	NA
Cl. 10.4, Fig 2(Concavity, X1)	-	70	NA
Cl. 10.4, Fig 2(Convexity, X2)	-	70	NA
Cl. 10.5, Fig 3(Squareness of side)	-	70	NA
Cl. 10.6, Fig 4(External Corner Radius)	-	70	NA
Cl. 10.7, Fig 5(Total twist, V)	-	70	NA
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	500	NA
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	NA
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	NA
Cl. 14.1(Exact Length)	-	70	NA
Cl. 14.1(Random Length)	-	70	NA
Cl. 14.1(Weight on individual length)	-	70	NA

Complete

17 Jun, 2024

-
-

143

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

5500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.5,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	NA
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	NA
9( FREEDOM FROM DEFECTS)	-	200	NA
10.1.a)( Macro examination IS 11371)	-	500	NA
10.1.b)( Sulphur print tests IS 12037)	-	500	NA
11 & 12(DIMENSIONS and Tolerances)	-	300	NA

Complete

17 Jun, 2024

-
0.0

144

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

5500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.5,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	200	NA
Cl 10.1(Workmanship)	-	100	NA
Cl 10.2(Workmanship)	-	100	NA
Cl 10.2(Press)	-	200	NA
Cl 10.3(Workmanship)	-	700	NA
Cl 11(Length, Width & Thickness)	-	400	NA
6.1(Carbon %)	-	300	NA
6.1(Manganese %)	-	300	NA
6.1(Phosphorus %)	-	300	NA
6.1(Sulphur %)	-	300	NA
6.1(Silicon %)	-	300	NA
6.1( Nitrogen%)	-	300	NA
6.1( Copper %)	-	300	NA
6.1( Nb)	-	200	NA
6.1( Aluminium %)	-	300	NA
6.1(V)	-	300	NA
6.1( Ti)	-	300	NA
6.1(Cr)	-	200	NA
6.1(Mo)	-	200	NA
6.1(Ni)	-	200	NA

Complete

17 Jun, 2024

-
0.0

145

IS 9873 : Part 3 (2017)

Safety of toys: Part 3 migration of certain elements (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	650	NA

Complete

17 Jun, 2024

-
-

146

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

19400 View breakup
Rs.19400.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	NA
2.1.1(Type and Desiganation)	-	100	NA
2.1.2(Type and Desiganation)	-	100	NA
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	NA
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
4.1(Performance Requirments)	-	700	NA
4.2(Performance Requirments)	-	700	NA
4.3(Performance Requirments)	-	700	NA
4.4(Performance Requirments)	-	1800	NA
4.5(Performance Requirments)	-	1700	NA
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	500	NA
4.7(Electrolytic corrosion)	-	1500	NA
4.8(Stability to accelerated ageing )	-	1000	NA
4.9(Insulation resistance test)	-	500	NA
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	9100	NA

Complete

17 Jun, 2024

-
Up to 0.22mm thickness only

147

IS 1110 (1990)

Ferrosilicon - Specification (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Boron-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Zirconium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	NA

Complete

17 Jun, 2024

-
-

148

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 2(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
5& 5.1, Table 3(Coordinating size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 3(Work size-IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 3(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
5& 5.1, Table 4(Nominal size-IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 4(Work size-IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 4(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 5,i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 5, i b (Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1000	Provisional Testing Charges
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	800	Provisional Testing Charges
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	Provisional Testing Charges
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	Provisional Testing Charges
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	500	Provisional Testing Charges
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	500	Provisional Testing Charges
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	1150	Provisional Testing Charges
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	1150	Provisional Testing Charges
6 table 6, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 6, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 6, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	Provisional Testing Charges
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	800	Provisional Testing Charges
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	Provisional Testing Charges
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	500	Provisional Testing Charges
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 7, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 7, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 7, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	Provisional Testing Charges
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	800	Provisional Testing Charges
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	500	Provisional Testing Charges
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	Provisional Testing Charges
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	500	Provisional Testing Charges
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 8, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 8, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 8, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	Provisional Testing Charges
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	1150	Provisional Testing Charges
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	1150	Provisional Testing Charges
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	Provisional Testing Charges
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	500	Provisional Testing Charges
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	500	Provisional Testing Charges
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 9, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 9, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 9, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	Provisional Testing Charges
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	800	Provisional Testing Charges
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	500	Provisional Testing Charges
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	500	Provisional Testing Charges
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 9, ii q(Bulk Density-)	-	500	Provisional Testing Charges
6 table 9, iii a(Resistance to staining )	-	500	Provisional Testing Charges
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges

Complete

17 Jun, 2024

-
-

149

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	200	NA
3.2.2(Cold Test)	-	500	NA
3.2.3(Flash Point (Abel))	-	500	NA
3.2.4(Emulsion Stability)	-	500	NA
3.3.1(Chloropyrifos content)	-	1300	NA
3.3.2(Acidity (as H2SO4), )	-	500	NA

Complete

17 Jun, 2024

-
-

150

IS 191 (2007)

Copper - Specification (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Silver- IS 440)	-	200	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	1700	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Phosphorus- IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Arsenic- IS440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Antimony-IS440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Bismuth-IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Iron IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Lead IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Nickel IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Oxygen IS 440)	-	250	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Selenium - IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Tellurium- IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Tin - IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Znic-IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Total Impurities- IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
7.1 - Table 4(Sulphur- IS 440)	-	100	For BIS samples: 1.5 times of BIS testing charges.
8.1(FREEDOM FROM DEFECTS)	-	100	For BIS samples: 1.5 times of BIS testing charges.
8.2(FREEDOM FROM DEFECTS)	-	100	For BIS samples: 1.5 times of BIS testing charges.
9.1- Table 5(Mass Resistivity- IS 3635)	-	100	For BIS samples: 1.5 times of BIS testing charges.

Complete

17 Jun, 2024

-
-

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List