BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List

Reset

155 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 75 (1973)

Specification for linseed oil, raw and refined (Second Revision)

20100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.2(clarity of the material)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.3(Admixture with other oils)	-	5500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Moisture and insoluble impurities)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Colour in a 1/4-inch cell on the Lovibond scale expressed as Y + 10 R)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Refractive index at 40°C)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Relative density at 30°C/30°C)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Saponification value)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Iodine value)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Acid value)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Unsaponifiable matter)	-	750	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Foot)	-	500	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Freedom from break)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Freedom from lead)	-	250	For BIS Samples: 1.5 times of BIS testing Charges
4.4, Table 1(Flash point ( Pensky-Martens ))	-	350	For BIS Samples: 1.5 times of BIS testing Charges

Complete

17 Jun, 2024

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	165	For BIS samples 1.5 times of BIS testing charges
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	170	For BIS samples 1.5 times of BIS testing charges
6.3(Standard Mark on Conduit)	-	165	For BIS samples 1.5 times of BIS testing charges
7.1.1(Maximum and minimum outside diameter of socket)	-	125	For BIS samples 1.5 times of BIS testing charges
7.1.1 Table-2(Length of Socket end)	-	125	For BIS samples 1.5 times of BIS testing charges
7.1.2(Maximum and minimum outside diameter of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.2(Minimum inside diameter of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.3(Length of conduit)	-	125	For BIS samples 1.5 times of BIS testing charges
7.4(Unifomity of The wall Thickness)	-	125	For BIS samples 1.5 times of BIS testing charges
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	200	For BIS samples 1.5 times of BIS testing charges
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1000	For BIS samples 1.5 times of BIS testing charges
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1000	For BIS samples 1.5 times of BIS testing charges
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	For BIS samples 1.5 times of BIS testing charges
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1000	For BIS samples 1.5 times of BIS testing charges
10(Resistance to Heat -Ball presure test)	-	1000	For BIS samples 1.5 times of BIS testing charges
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	500	For BIS samples 1.5 times of BIS testing charges
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	800	For BIS samples 1.5 times of BIS testing charges
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	750	For BIS samples 1.5 times of BIS testing charges
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	200	For BIS samples 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

6800 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.6,800/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 (i) (Apendix B)(Total milk solids -Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (i) (Apendix B)(Total milk solids - Partly Skimmed Condenied Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (i) (Apendix B)(Total milk solids - Skirmned Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (ii) (IS : 11762- 1986)(Fat -Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (ii) (IS : 11762- 1986)(Fat -Partly Skimmed Condenied Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (ii) (IS : 11762- 1986)(Fat -Skirmned Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (iii) (Apendix C)(Sucrose -Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (iii) (Apendix C)(Sucrose -Partly Skimmed Condenied Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (iii) (Apendix C)(Sucrose -Skirmned Condensed Milk)	-	300	For BIS samples: 1.5 times of BIS testing charges
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Partly Skimmed Condenied Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (vi) (Apendix D)(Titratable acidity (as lactic acid) -Skirmned Condensed Milk)	-	400	For BIS samples: 1.5 times of BIS testing charges
Table 1 (v) (Apendix E)(Accelerated starage test -Condensed Milk)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Table 1 (v) (Apendix E)(Accelerated starage test -Partly Skimmed Condenied Milk)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Table 1 (v) (Apendix E)(Accelerated starage test -Skirmned Condensed Milk)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.1(Salmonella IS 5887 Part 3)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.1(Shigella IS 5887 Part 7)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.2(Coliform Count IS 5401 Part 1)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.3(Yeast and Mould Count IS 5403)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.4(Coagulase positive Staphylococcus aureus IS 5887 Part 2)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl.5.1.10.5(Escherichia coli IS 5887 Part 1)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 11884 (1986)

Specification for fire - Resistant brattice sheeting made from unsupported plastics

- View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	200	For BIS samples 1.5 times of BIS testing charges
Cl. 6.1(Stress Relief Test- Appendix A)	-	750	For BIS samples 1.5 times of BIS testing charges
Cl. 6.2(Opacity- Appendix B)	-	750	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	1000	For BIS samples 1.5 times of BIS testing charges
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	1200	For BIS samples 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	500	For BIS samples 1.5 times of BIS testing charges
cl 2.2.2(Dimensions)	-	500	For BIS samples 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 12176 (1987)

Specification for sweetened ultra high temperature (UHT) treated condensed milk

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1- Table 1-Sl No.-i(Total milk solids)	-	500	Provisional Testing Charges
4.1.1- Table 1-Sl No.-ii(Fat)	-	500	Provisional Testing Charges
4.1.1- Table 1-Sl No.-iii(Sucrose)	-	500	Provisional Testing Charges
4.1.1- Table 1-Sl No.-iv(Titratable acidity ( as lactic acid ))	-	250	Provisional Testing Charges
4.1.1- Table 1-Sl No.-v(Titratable acidity (as acetic acid) after incubation, of packages for 7 days at 37°C.)	-	250	Provisional Testing Charges
4.1.4(Colour)	-	500	Provisional Testing Charges
4.1.5(Flavour & Taste)	-	500	Provisional Testing Charges
4.1.10.1(Bacterial spores ( plate count ))	-	500	Provisional Testing Charges
4.1.10.2(Coliform count)	-	500	Provisional Testing Charges
4.1.10.3(Coagulase positive Staphylococcus aureus)	-	500	Provisional Testing Charges

Complete

17 Jun, 2024

-
-

IS 447 (1988)

Specification for rubber hose for welding (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.2 - Table 1(Dimensions and Tolerances)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 3.3 - Table 2(Physical Requirements)	-	4000	For BIS samples 1.5 times of BIS testing charges
Cl. 3.4 - Table3(Performance Requirements)	-	5000	For BIS samples 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

100

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
4(INSULATION : MATERIALS)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
5.1(FILLER AND INNER SHEATH)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
5.2(FILLER AND INNER SHEATH)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
6(ARMOURING)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
7(OUTER SHEATH)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
8.1(CONDUCTOR: CONSTRUCTION)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
8.2(PROTECTIVE BARRIER)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
9.1(Insulation Applied by extrusicn)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
9.2(Thickness of Insulation - Average)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
9.3(Thickness of Insulation - Minimum)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
9.4(Application of Insulation)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
10.1(Core Identification)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
10.2(Core Identification- Neutral)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
10.3(Core Identification by number )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
10.4(Core Identification by number - Neutral )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
11(LAVING UP OF CORES)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
12.1 & 12.2(Inner sheath : Application)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
12.3(Thickness of Inner Sheath)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.1(Armouring: Application)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.1.2(Armouring: Coverage )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.1.3(Armouring: Direction of Lay )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.2(Type of armour )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.3(Armouring : Dimensions -Wire Diameter)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.3(Armouring : Dimensions -Formed wire )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.4(Armour: Joint)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.5(Armouring : Resistance Test)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.6 a)(ARMOURING: Tensile Strength)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.6 b)(ARMOURING: Elongation )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
13.6 g)(ARMOURING: Resistivity)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
14.1(Outer Sheath : Application)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
14.2(Colour of outer sheath)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
14.3(Thickness of outer sheath - AVERAGE)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
14.3(Thickness of outer sheath - minimum)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 a) i)(Annealing Test ( For copper wire ) )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 a) iii)(Wrapping test (for aluminium))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 a) iv)(Resistance test - Main conductor)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	3000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) v) (Sheath : Hot deformation)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) vi) (Sheath : Heat shock test)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 e) vii) (Sheath : Thermalstability)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.2(HIGH VOLTAGE TEST )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.3(FLAMMABILITY TEST : Period of Burning )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.3(FLAMMABILITY TEST : Unaffected length )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.9(Oxygen Index Test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.1(Flame Retardance Test on Single Cables)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.11(Flame Retardance Test on Bunched Cables)	-	5000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.13(Test for Halogen Acid Gas Evolution)	-	3500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
16.14(Temperature Index)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.4 (a)(Cold bend)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
Table 4(Copper purity test)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
Cl No. 16.10(Smoke density test)	-	2500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.
15.4 (b)(Cold impact)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 6,500/- for single core, 30% extra for each additional core, Rs. 10,000/- for FR, Rs. 14,000/- for FRLSH.

Complete

17 Jun, 2024

-
-

101

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	500	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	500	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	500	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	3000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1500	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	2000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	5500	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	1500	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	2500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	5000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	1500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	1500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	0	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	0	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	2500	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	1000	-
10.0(Measurement of Heating up time)	-	2000	-
11.0(Measurement of sole plate temperature)	-	2000	-
12.0(Measurement of Tempearture Distribution)	-	2000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1500	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	1000	-
17(Finish)	-	500	-

Complete

17 Jun, 2024

-
-

102

IS 13021 : Part 1 (1991)

AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 1 general and safety requirements

- View breakup
Rs.46000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

103

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

- View breakup
Rs.5000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

104

IS 285 (1992)

Laundry soaps - Specification (Third Revision)

- View breakup
Rs.7300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

105

IS 1322 (1993)

Bitumen Felts for Water Proofing and Damp-proofing

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2 & Table 1(Weight)	-	250	-
4.3.3, & Table 1(Weight )	-	250	-
5.4 & Table 1(Weight )	-	250	-
6(Dimension-IS 1322)	-	400	-
7.1(Breaking Strength test- IS 13826(Part 1))	-	500	-
7.1(Pliabilitry Test-IS 13826(Part 2))	-	500	-
7.1(Strage Sticking Test-IS 13826(Part 3))	-	500	-
7.1(Pressure Head Test-IS 13826(Part-4 )	-	400	-
7.1(Heat Resistance Test-IS 13826(Part 5))	-	500	-
7.1(Water Absorption Test-IS 13826(Part 6))	-	500	-

Complete

17 Jun, 2024

-
-

106

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	1000	For BIS samples: 1.5 times of BIS testing charges.
7.1 Table-1(Dimensional measurement of wires)	-	500	For BIS samples: 1.5 times of BIS testing charges.
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor )	-	1000	For BIS samples: 1.5 times of BIS testing charges.
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	For BIS samples: 1.5 times of BIS testing charges.
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	For BIS samples: 1.5 times of BIS testing charges.
9.1(Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges.
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	For BIS samples: 1.5 times of BIS testing charges.
9.3(Direction of Lay)	-	500	For BIS samples: 1.5 times of BIS testing charges.
9.4(Multiple layers of wires)	-	500	For BIS samples: 1.5 times of BIS testing charges.
12.2 Table 1(Breaking Load Test- Before Stranding)	-	2000	For BIS samples: 1.5 times of BIS testing charges.
12.2 Table 1(Breaking Load Test- After Stranding)	-	2000	For BIS samples: 1.5 times of BIS testing charges.
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	For BIS samples: 1.5 times of BIS testing charges.
12.3 Table 1(Elongation Test- After Stranding)	-	1000	For BIS samples: 1.5 times of BIS testing charges.
12.4 Table 1(Resistance of Aluminium wire)	-	1000	For BIS samples: 1.5 times of BIS testing charges.
9.2(Lay Ratio 24 wire layer)	-	500	For BIS samples: 1.5 times of BIS testing charges.
9.2(Lay Ratio 18 wire layer)	-	500	For BIS samples: 1.5 times of BIS testing charges.
9.2(Lay Ratio 12 wire layer)	-	500	For BIS samples: 1.5 times of BIS testing charges.
9.2(Lay Ratio 3/6 wire layer)	-	500	For BIS samples: 1.5 times of BIS testing charges.

Complete

17 Jun, 2024

-
-

107

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	500	N.A.
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	500	N.A.
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	750	N.A.
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	500	N.A.
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	N.A.
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	1750	N.A.
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	N.A.
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	1500	N.A.
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1750	N.A.
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1500	N.A.
3.4-Table 1(vi)(Compression set)	-	1200	N.A.
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	3500	N.A.
Clause 4.3 Table 1(Zinc oxide)	-	500	N.A.
Clause 3.4 Table 1(Heavy metal content)	-	750	N.A.
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	1500	N.A.

Complete

17 Jun, 2024

-
-

108

IS 13395 (1995)

Performance of handles and handle assemblies attached to cookware - Specification

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	250	Provisional Testing Charges
5.2(Bending Strength)	-	500	Provisional Testing Charges
5.3(Torque Strength)	-	500	Provisional Testing Charges
5.4(Impact Strength)	-	500	Provisional Testing Charges
5.5(Fatigue Resistance)	-	500	Provisional Testing Charges
5.6(Leakage)	-	500	Provisional Testing Charges
5.7(Thermal Insulation)	-	500	Provisional Testing Charges
5.8(Heat Resistance)	-	750	Provisional Testing Charges
5.9(Washing Resistance)	-	1000	Provisional Testing Charges
5.1(Burning Resistance)	-	1000	Provisional Testing Charges

Complete

17 Jun, 2024

-
-

109

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

- View breakup
Rs.12000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

110

IS 14309 (1995)

Blended edible vegetable oils specification

9500 View breakup
Rs.9500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Moisture and volatile matter percent by mass, Max type1)	-	750	N.A.
Table-1(Acid value, mx type 1)	-	500	N.A.
Table-1(Unsaponifiable matter, percent by mass, MaX type1)	-	500	N.A.
Table-1(Flash point, Pen&y-Martens type1)	-	400	N.A.

Complete

17 Jun, 2024

-
-

111

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

112

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
10 (elec)(Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
10 (elec)(Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
10 (elec)(Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
10 (mech)(Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	For BIS samples: 1.5 times of BIS testing charges
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1500	For BIS samples: 1.5 times of BIS testing charges
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1500	For BIS samples: 1.5 times of BIS testing charges
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1500	For BIS samples: 1.5 times of BIS testing charges
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.7.2 (chem)(Mass of Zinc coating)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.7.2 (chem)(Uniformity of Zinc coating)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	For BIS samples: 1.5 times of BIS testing charges
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

113

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1500	For BIS samples 1.5 times of BIS testing charges
4.2.3(Carbon Dispersion Test)	-	500	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	125	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	125	For BIS samples 1.5 times of BIS testing charges
5.3(Types and Features )	-	125	For BIS samples 1.5 times of BIS testing charges
5.6(Types and Features )	-	125	For BIS samples 1.5 times of BIS testing charges
6.1(Finish)	-	250	For BIS samples 1.5 times of BIS testing charges
7.1.1(Resistance to Deformation)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.2(Resistance to Impact)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.3(Test for Top Load Resistance)	-	1000	For BIS samples 1.5 times of BIS testing charges
7.4(Tensile Strength)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.5(Flexural Modulus)	-	1500	For BIS samples 1.5 times of BIS testing charges
7.6(overall Migration)	-	3000	For BIS samples 1.5 times of BIS testing charges
5(Types and Features )	-	500	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	For BIS samples 1.5 times of BIS testing charges
7.1.2(Resistance to Deformation)	-	1500	For BIS samples 1.5 times of BIS testing charges
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	200	For BIS samples 1.5 times of BIS testing charges
5.2 Table 2 (7)(Minimum Wall Thickness)	-	150	For BIS samples 1.5 times of BIS testing charges
5.4(Wall Thickness above effective height)	-	150	For BIS samples 1.5 times of BIS testing charges
9.1(Lid Thickness)	-	150	For BIS samples 1.5 times of BIS testing charges
9.1(Man-Hole and Hand-Hole Lids)	-	150	For BIS samples 1.5 times of BIS testing charges
9.2(Man-Hole and Hand-Hole Lids)	-	150	For BIS samples 1.5 times of BIS testing charges
9.2.1(Man-Hole and Hand-Hole Lids)	-	150	For BIS samples 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

114

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	100	For BIS samples 1.5 times of BIS testing charges
6(Dimensions of pipes)	-	500	For BIS samples 1.5 times of BIS testing charges
7(Visual Appearance)	-	250	For BIS samples 1.5 times of BIS testing charges
8.1(Hydraulic characteristics)	-	5500	For BIS samples 1.5 times of BIS testing charges
8.2(Reversion)	-	1500	For BIS samples 1.5 times of BIS testing charges
8.3(Density)	-	1000	For BIS samples 1.5 times of BIS testing charges
8.4(Melt Flow Rate)	-	1250	For BIS samples 1.5 times of BIS testing charges
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	For BIS samples 1.5 times of BIS testing charges
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1000	For BIS samples 1.5 times of BIS testing charges
10(Marking)	-	200	For BIS samples 1.5 times of BIS testing charges
3(Designation)	-	200	For BIS samples 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

115

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	300	For BIS samples: 1.5 times of BIS testing charges
6(Rating)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
7(Classification)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8.9(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
8(Marking)	-	300	For BIS samples: 1.5 times of BIS testing charges
10(Protection against Electric Shock)	-	500	For BIS samples: 1.5 times of BIS testing charges
11.1(Provision for earthing)	-	1000	For BIS samples: 1.5 times of BIS testing charges
12(Terminals)	-	500	For BIS samples: 1.5 times of BIS testing charges
12.2.1(Terminals)	-	500	For BIS samples: 1.5 times of BIS testing charges
12.2.2(Connection of conductor)	-	200	For BIS samples: 1.5 times of BIS testing charges
12.2.3(Mechanical strength of terminals)	-	200	For BIS samples: 1.5 times of BIS testing charges
12.2.4(Resistance to corrosion)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.2.5(Undue damage to conductor)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.2.7(Insertion of conductor)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.2.9(Locking against accidental loosening)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.2.11(Distance between screw and conductor)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.3.2(Screwless terminals)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.3.3(Connectin of conductor)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.3.4(Material of terminals)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.3.5(Clamping)	-	100	For BIS samples: 1.5 times of BIS testing charges
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	100	For BIS samples: 1.5 times of BIS testing charges
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	500	For BIS samples: 1.5 times of BIS testing charges
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	250	For BIS samples: 1.5 times of BIS testing charges
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.2(b) Construction of switch [Cl 13.2])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.2(i) Installation Test)	-	100	For BIS samples: 1.5 times of BIS testing charges
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.4(d) Ordinary switches [Cl 13.4])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.5(e) Rotary switches [Cl 13.5])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.6(f) Screws and other means [Cl 13.6])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.8(h) Assessories combined with switches [Cl. 13.8])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	For BIS samples: 1.5 times of BIS testing charges
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	100	For BIS samples: 1.5 times of BIS testing charges
14(Mechanism [Cl. 14])	-	200	For BIS samples: 1.5 times of BIS testing charges
14.4(Mechanism)	-	200	For BIS samples: 1.5 times of BIS testing charges
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	500	For BIS samples: 1.5 times of BIS testing charges
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	250	For BIS samples: 1.5 times of BIS testing charges
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	250	For BIS samples: 1.5 times of BIS testing charges
15.3(c) Resistance to Humidity [Cl. 15.3])	-	250	For BIS samples: 1.5 times of BIS testing charges
16.1(Insulation resistance [Cl. 16.1])	-	500	For BIS samples: 1.5 times of BIS testing charges
16.2( Electric Strength [Cl. 16.2])	-	500	For BIS samples: 1.5 times of BIS testing charges
17(Temperature- rise [Cl. 17])	-	1000	For BIS samples: 1.5 times of BIS testing charges
18(Marking and breaking Capacity[Cl. 18])	-	1000	For BIS samples: 1.5 times of BIS testing charges
18(Marking and breaking Capacity[Cl. 18])	-	1000	For BIS samples: 1.5 times of BIS testing charges
14.3(d)Test for arcing and sparking [Cl 14.3])	-	100	For BIS samples: 1.5 times of BIS testing charges
19(Normal Operation [Cl. 19] a) General & Operation)	-	300	For BIS samples: 1.5 times of BIS testing charges
19(b) Electric Strength)	-	300	For BIS samples: 1.5 times of BIS testing charges
19(c)Temperature-rise )	-	300	For BIS samples: 1.5 times of BIS testing charges
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	300	For BIS samples: 1.5 times of BIS testing charges
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	300	For BIS samples: 1.5 times of BIS testing charges
20(Mechanical Strength Test [Cl. 20])	-	500	For BIS samples: 1.5 times of BIS testing charges
21(Resistance to Heat [Cl.21])	-	500	For BIS samples: 1.5 times of BIS testing charges
21(Resistance to Heat [Cl.21])	-	500	For BIS samples: 1.5 times of BIS testing charges
21(Resistance to Heat [Cl.21])	-	500	For BIS samples: 1.5 times of BIS testing charges
22(Screw, Current Carrying Part And Connection [Cl.22])	-	300	For BIS samples: 1.5 times of BIS testing charges
22.1(i) Screw & Nuts [Cl.22.1])	-	300	For BIS samples: 1.5 times of BIS testing charges
22.3(iii) Electrical Connections [Cl.22.3])	-	300	For BIS samples: 1.5 times of BIS testing charges
22.4(ii) Screw & rivets [Cl . 22.4])	-	300	For BIS samples: 1.5 times of BIS testing charges
22.5(iv) Current carrying part [Cl.22.5])	-	300	For BIS samples: 1.5 times of BIS testing charges
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	500	For BIS samples: 1.5 times of BIS testing charges
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	500	For BIS samples: 1.5 times of BIS testing charges
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	500	For BIS samples: 1.5 times of BIS testing charges
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	500	For BIS samples: 1.5 times of BIS testing charges
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	500	For BIS samples: 1.5 times of BIS testing charges
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

116

IS 14542 (1998)

Partly skimmed milk powder specification

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	500	-
Table 1(i)(Moisture Type II (IS 11623))	-	500	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	400	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	400	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	400	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	400	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	400	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	400	-
Cl 6.4(Flavour and Taste (IS 10030))	-	200	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	500	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	500	-

Complete

17 Jun, 2024

-
-

117

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

- View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.10000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
xcept screw-less type terminals

118

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	200	NA
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1500	NA
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	750	NA
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	750	NA
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	2500	NA
5.1 table -1(DIMENSIONS OF PIPES)	-	150	NA
5.1.2(Ovality)	-	100	NA
6.1(VISUAL APPEARANCE)	-	250	NA
7.1 Table -2(Hydraulic Characteristics)	-	500	NA
7.2(Reversion Test)	-	1000	NA
7.3(Tensile Test)	-	1500	NA
7.4table-2(Fusion Compatibility Test)	-	0	NA
7.5(Density)	-	1500	NA
7.6(Melt now Rate (MFR))	-	1500	NA
(Cl.4.2)(Carbon black- a)carbon content)	-	1500	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	1000	-
Cl.5(Dimensions of pipe - i) Outside diameter)	-	200	-
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	200	-
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	200	-
Cl.6(Visual Appearance)	-	200	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	2000	-
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1000	-
Cl.7.2)(Reversion Test)	-	1000	-
Cl.7.3(Tensile Test- i) Tensile Strength)	-	1500	-
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	2000	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	1000	-
(Cl.7.5)(Density)	-	1000	-
Cl.7.6(Melt Flow Rate)	-	1000	-

Complete

17 Jun, 2024

-
-

119

IS 14609 (1999)

Dry chemical powder for fighting a,b,c, class fires specification

- View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

120

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

12250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	100	NA
5(Colour of fittings)	-	250	NA
7.1,Table 1(Wall thickness)	-	100	NA
7.2 ,Table 2&3(Socket Dimensions)	-	100	NA
7.3(Dimensions of waste trap(Nahani Trap)	-	100	NA
8(Sealing Rings)	-	500	NA
10(Workmanship)	-	100	NA
11(Design requirements)	-	100	NA
12.1(Visual appearance)	-	250	NA
12.2(Stress relief test)	-	1500	NA
12.3(Vicat softening tempewrature)	-	1000	NA
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	NA
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	NA
Cl.15, Annex B(Sulphated Ash Content)	-	1500	NA
16.1(Impact test)	-	1500	NA
17(Watet tightness of joint)	-	1500	NA
19(Marking)	-	100	NA
4(Size Designation)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	200	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	200	-
11.5,Table 6(Pipe Clips)	-	200	-

Complete

17 Jun, 2024

-
-

First
Prev
3
4
5
6
Next
Last

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found