BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List

Reset

155 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(CLASSIFICATION OF PIPES)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
6.1.2(PVC Resin)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
8(SEALING RINGS)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
9.1(PIPE ENDS)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.1(Colour)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.1(Surface Finish)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.7(Sulphated Ash Content)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	10000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
11.2(Resistance to External Blows at 0°C)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
7.1.4(Length)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00
10.3(Effect on Water Test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.28000.00

Complete

17 Jun, 2024

-
-

IS 1293 (2005)

Plugs and socket- outlets of rated voltage up to and including 250 volts and rated current up to 16 amperes

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	100	For BIS sample 1.5 times of BIS testing charges, For other: Rs.10000/- upto 10A, Rs.15000/- Above 10A.
6.1(RATINGS)	-	100	-
6.2(RATINGS)	-	100	-
7(CLASSIFICATION)	-	100	-
7.1(CLASSIFICATION)	-	100	-
7.1.1 (CLASSIFICATION)	-	100	-
7.1.2(CLASSIFICATION)	-	100	-
7.1.3 (CLASSIFICATION)	-	100	-
7.1.4(CLASSIFICATION)	-	100	-
7.2(CLASSIFICATION)	-	100	-
7.2.1(CLASSIFICATION)	-	100	-
7.2.2 (CLASSIFICATION)	-	100	-
7.2.3(CLASSIFICATION)	-	100	-
7.2.4(CLASSIFICATION)	-	100	-
7.2.5(CLASSIFICATION)	-	100	-
7.3(CLASSIFICATION)	-	100	-
8.1(MARKING)	-	200	-
8.2(MARKING)	-	100	-
8.3(MARKING)	-	100	-
8.4(MARKING)	-	100	-
8.5(MARKING)	-	100	-
8.6(MARKING)	-	100	-
8.7(MARKING)	-	200	-
8.8(MARKING)	-	100	-
9.1(CHECKING OF DIMENSIONS)	-	500	-
9.2(CHECKING OF DIMENSIONS)	-	200	-
9.3(CHECKING OF DIMENSIONS)	-	200	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	-
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
11(PROVISION FOR EARTHING)	-	200	-
11.1(PROVISION FOR EARTHING)	-	100	-
11.2(PROVISION FOR EARTHING)	-	200	-
11.3(PROVISION FOR EARTHING)	-	100	-
11.4(PROVISION FOR EARTHING)	-	100	-
11.5(PROVISION FOR EARTHING)	-	200	-
12(TERMINALS)	-	100	-
12.1.1(TERMINALS)	-	100	-
12.1.2(TERMINALS)	-	100	-
12.2(TERMINALS)	-	200	-
12.2.1(TERMINALS)	-	100	-
12.2.2(TERMINALS)	-	100	-
12.2.3(TERMINALS)	-	100	-
12.2.4(TERMINALS)	-	100	-
12.2.5(TERMINALS)	-	200	-
12.2.6(TERMINALS)	-	200	-
12.2.7(TERMINALS)	-	200	-
12.2.8(TERMINALS)	-	200	-
12.2.9(TERMINALS)	-	200	-
12.2.10(TERMINALS)	-	200	-
12.2.11(TERMINALS)	-	200	-
12.3(TERMINALS)	-	200	-
12.3.1(TERMINALS)	-	200	-
12.3.2(TERMINALS)	-	200	-
12.3.3(TERMINALS)	-	200	-
12.3.4(TERMINALS)	-	200	-
12.3.5(TERMINALS)	-	200	-
12.3.6(TERMINALS)	-	200	-
12.3.7(TERMINALS)	-	200	-
12.3.8(TERMINALS)	-	200	-
12.3.9(TERMINALS)	-	200	-
12.3.10(TERMINALS)	-	500	-
12.3.11 (a)(TERMINALS)	-	250	-
12.3.11 (b)(TERMINALS)	-	250	-
12.3.12 (TERMINALS)	-	500	-
13.1(Construction of fixed Socket Outlets)	-	100	-
13.2(Construction of fixed Socket Outlets)	-	100	-
13.3(Construction of fixed Socket Outlets)	-	100	-
13.4(Construction of fixed Socket Outlets)	-	100	-
13.4(Construction of fixed Socket Outlets)	-	100	-
13.4(Construction of fixed Socket Outlets)	-	100	-
13.4(Construction of fixed Socket Outlets)	-	100	-
13.4(Construction of fixed Socket Outlets)	-	100	-
13.5(Construction of fixed Socket Outlets)	-	100	-
13.7(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	200	-
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	200	-
13.8(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.9(Construction of fixed Socket Outlets)	-	100	-
13.1(Construction of fixed Socket Outlets)	-	100	-
13.11(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.12(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.14(Construction of fixed Socket Outlets)	-	200	-
13.15(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.16(Construction of fixed Socket Outlets)	-	200	-
13.17(Construction of fixed Socket Outlets)	-	100	-
13.18(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.19(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.2(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	100	-
13.21(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	200	-
13.22(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	200	-
13.23(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	200	-
14.1(Construction of Plugs & Portables socket outlet )	-	100	-
14.2(Construction of Plugs & Portables socket outlet )	-	200	-
14.3(Construction of Plugs & Portables socket outlet )	-	200	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	--
14.8(Construction of Plugs & Portables socket outlet )	-	100	-
14.9(Construction of Plugs & Portables socket outlet )	-	100	-
14.1(Construction of Plugs & Portables socket outlet )	-	200	-
14.11(Construction of Plugs & Portables socket outlet )	-	200	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	-
15.0(Interlocked socket-outlets)	-	500	-
16.1(Resistance to Ageing )	-	500	-
16.2(Resistance to Harmful Ingress of Water)	-	500	-
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	200	-
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	200	-
16.2.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	200	-
16.2.4(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	200	-
16.3(Resistance to humidity)	-	500	-
17.1(Insulation Resistance)	-	500	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
17.2( Electric Strength)	-	500	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
18.0(Operation of Earthing Contacts)	-	200	-
19.0(Temperature Rise )	-	200	-
20.0(Making & Breaking Capacity)	-	500	-
21.0(Normal Operation)	-	200	-
21.0(Normal Operation)	-	200	-
21.0(Normal Operation)	-	200	-
21.0(Normal Operation)	-	200	-
22.1(Verification of Max withdrawal force)	-	100	-
22.2(Verification of Minimum withdrawal force)	-	100	-
23.1(Flexible cables & their connection )	-	100	-
23.2(Flexible cables & their connection )	-	200	-
23.3(Flexible cables & their connection )	-	200	-
23.4(Flexible cables & their connection )	-	200	-
24.1(a) Mechanical Strength )	-	200	-
24.2(For Portable single socket outlets/ plugs)	-	200	-
24.3(MECHANICAL STRENGTH)	-	200	-
24.4(For Portable socket outlets/ plugs)	-	200	-
24.5(For Portable single socket outlets/ plugs)	-	200	-
24.6(b) For screwed glands of accessories other than ordinary)	-	200	-
24.7(For plug pins provided with insulating sleeves)	-	200	-
24.8(c) For shuttered socket-outlets )	-	100	-
24.9(For portable multiple and combined socket outlets)	-	100	-
24.1(For plugs)	-	200	-
24.11(For portable socket outlets having means for suspension on a wall)	-	100	-
24.12(For portable socket outlets having means for suspension on a wall)	-	100	-
24.13(For portable socket outlets having means for suspension on a wall)	-	100	-
24.14(MECHANICAL STRENGTH)	-	100	-
24.14.1(e)Verification of the Non-removal of Covers or Cover-Plates )	-	100	-
24.14.2(f)Verification of the Removal of Covers or Cover-Plates )	-	100	-
24.15(Verification of the Removal of Covers or Cover-Plates )	-	100	-
24.16(Verification of the Removal of Covers or Cover-Plates )	-	100	-
24.17(Verification of the Removal of Covers or Cover-Plates )	-	200	-
24.18(Verification of the Removal of Covers or Cover-Plates )	-	100	-
25.1(RESISTANCE TO HEAT)	-	100	-
25.2(RESISTANCE TO HEAT)	-	200	-
25.3(RESISTANCE TO HEAT)	-	200	-
25.4(RESISTANCE TO HEAT)	-	200	-
26.1(Screws, current carrying parts and connections)	-	100	-
26.2(Screws, current carrying parts and connections)	-	100	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.7(Screws, current carrying parts and connections)	-	100	-
27.1(Creepage distances, clearances and distances through sealing compound )	-	200	-
27.2(Creepage distances, clearances and distances through sealing compound )	-	100	-
27.3(Creepage distances, clearances and distances through sealing compound )	-	100	-
28.1.1(Glow-Wire Test )	-	500	-
28.1.2(Addiitional tests for plugs with pins provided with insulating sleeves)	-	500	-
28.2(Resistance to Tracking)	-	500	-
29.0(Resistance to Rusting)	-	200	-
30.1(Addiitional tests on pins provided with insulating sleeves - Pressure Test at High Temperature)	-	200	-
30.2(Addiitional tests on pins provided with insulating sleeves - Static Damp Heat Test)	-	200	-
30.3(Addiitional tests on pins provided with insulating sleeves - Impact Test at Low Temperature)	-	200	-
30.4(Addiitional tests on pins provided with insulating sleeves - Tests at Low Temperature)	-	200	-

Complete

17 Jun, 2024

-
-

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	3000		-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	3000		-

Complete

17 Jun, 2024

-
-

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	625	-

Complete

17 Jun, 2024

-
-

IS 9573 : Part 1 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 (General)	-	250	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2(Material)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.1(Lining)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.2(Reinforcement)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.3(Cover)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.3(Length)	-	200	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- cover)	-	650	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.6(Electrical Continuity Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	1000	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Material)	-	500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.1(Lining)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.2 (a)(Reinforcement)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.2 (b)(Reinforcement)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.2.3(Cover)	-	0	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.3 Sub Clause 4.3.3(Length)	-	150	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	750	For BIS samples: 1.5 times of BIS testing charges
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	750	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 8323 (2018)

Palm oil - Specification (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 and sub-clause 5.2(Description)	-	250	-
Clause 5 and sub-clause 5.2(Oil Soluble Colour)	-	500	-
Clause 5 and sub-clause 5.2.1(Clarity of Material)	-	500	-
Clause 5 and sub-clause 5.4(Aflatoxin)	-	1500	-
Clause 5 and sub-clause 5.3(Presence of non-edible oils and adultrants (Karanja Oil, Argemone Oil, Hydrocyanic acid, Mineral Oil, KUSUM OIL AND OTHER OILS CONTAINING CYANOGENIC COMPOUNDS, CASTOR OIL, NEEM OIL))	-	5000	-
Clause 5 and sub-clause 5.5(Metal contaminants)	-	2000	-
Clause 5 and sub-clause 5.5(pesticide residues)	-	1500	-
Clause 5 and sub-clause 5.6(Propyl Gallate)	-	500	-
Clause 5 and sub-clause 5.6(Ascorbyl Esters)	-	500	-
Clause 5 and sub-clause 5.6(BHA)	-	500	-
Clause 5 and sub-clause 5.6(BHT)	-	500	-
Clause 5 and sub-clause 5.6(TBHQ)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Melting point,, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Melting point, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Peroxide value, expressed as milliequivalents of oxygen per kg, Max,Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Peroxide value, expressed as milliequivalents of oxygen per kg, Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/xi(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/xi(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/xii(Hexane, ppm, Max, Refined Grade)	-	1500	-
Clause 5 and sub-clause 5.7/ Table 1/xii(Hexane, ppm, Max, Raw Grade)	-	1500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/i (Lead, mg/kg, Max)	-	500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/ii(Arsenic, mg/kg, Max)	-	500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iii(Cadmium, mg/kg, Max)	-	500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iv(Mercury (total) mg/kg, Max)	-	500	-

Complete

17 Jun, 2024

-
-

IS 4055 (2018)

Maize (Corn) oil - Specification (First Revision)

18350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 and sub-clause 5.2(Description)	-	250	-
Clause 5 and sub-clause 5.2(Peroxide Value)	-	500	-
Clause 5 and sub-clause 5.2(Oil Soluble Colour)	-	500	-
Clause 5 and sub-clause 5.2.1(Clarity of Material)	-	500	-
Clause 5 and sub-clause 5.4(Aflatoxin)	-	1500	-
Clause 5 and sub-clause 5.3(Presence of non-edible oils and adultrants (Karanja Oil, Argemone Oil, Hydrocyanic acid, Mineral Oil, KUSUM OIL AND OTHER OILS CONTAINING CYANOGENIC COMPOUNDS, CASTOR OIL, NEEM OIL))	-	5000	-
Clause 5 and sub-clause 5.5(Metal contaminants)	-	2000	-
Clause 5 and sub-clause 5.5(pesticide residues)	-	2000	-
Clause 5 and sub-clause 5.6(Propyl Gallate)	-	500	-
Clause 5 and sub-clause 5.6(Ascorbyl Esters)	-	500	-
Clause 5 and sub-clause 5.6(BHA)	-	500	-
Clause 5 and sub-clause 5.6(BHT)	-	500	-
Clause 5 and sub-clause 5.6(TBHQ)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iii(Refractive index at 40°C, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/iv(Specific gravity at 30°C/30°C, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/v(Saponification value, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vi(Iodine value (Wijs), Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/vii(Acid value, Max, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Refined Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Raw Grade)	-	750	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/ix(Flash point (Pensky-Martens), closed, °C, Min, Refined Grade, Raw Grade)	-	500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Hexane, ppm, Max, Refined Grade)	-	1500	-
Clause 5 and sub-clause 5.7/ Table 1/x(Hexane, ppm, Max, Raw Grade)	-	1500	-
Clause 5 and sub-clause 5.8.1.3 Table 2/i (Lead, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/ii(Arsenic, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iii(Cadmium, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iv(Mercury (total) mg/kg, Max)	-	400	-

Complete

17 Jun, 2024

-
-

IS 3491 (2018)

Safflower seed oil - Specification (First Revision)

19100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(TYPES AND GRADES)	-	250	For BIS samples: 1.5 times of BIS testing charges
5.1(Description)	-	250	For BIS samples: 1.5 times of BIS testing charges
5.2(Clarity and adulteration)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.3(Non-edible oils presence)	-	5000	For BIS samples: 1.5 times of BIS testing charges
5.4(aflatoxin)	-	1500	For BIS samples: 1.5 times of BIS testing charges
5.5(Metal contaminants and pesticide residues)	-	4000	For BIS samples: 1.5 times of BIS testing charges
5.6(permitted antioxidants and antioxidant synergists)	-	1500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Moisture and insoluble impurities)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Colour in a 1 inch cell on the Lovibond scale, expressed as (Y + 5R))	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Refractive index at 40ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Specific gravity at 30º/30ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Saponification value)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Iodine value (Wijs)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Bellier turbidity temperature, °C)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Acid value)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Unsaponifiable matter,)	-	750	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Flash point Pensky-Martens (closed), ºC)	-	500	For BIS samples: 1.5 times of BIS testing charges
5.7, Table 1(Hexane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(Pb)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(As)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(Cd)	-	400	For BIS samples: 1.5 times of BIS testing charges
5.8.1.3, Table 2(Hg)	-	400	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 547 (2018)

Sesame oil - Specification (Third Revision)

19600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 and sub-clause 5.8.1.3 Table 2/iv(Mercury (total) mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/iii(Cadmium, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/ii(Arsenic, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8.1.3 Table 2/i (Lead, mg/kg, Max)	-	400	-
Clause 5 and sub-clause 5.8/ Table 1/xi(Hexane, ppm, Max, Solvent Extracted - raw grade)	-	1500	-
Clause 5 and sub-clause 5.8/ Table 1/xi(Hexane, ppm, Max, Solvent Extracted - refined grade)	-	1500	-
Clause 5 and sub-clause 5.8/ Table 1/x(Flash point (Pensky-Martens), closed, °C, Min, Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/x(Flash point (Pensky-Martens), closed, °C, Min, Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ix(Bellier turbidity temperature, °C, Max, Expressed- raw grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ix(Bellier turbidity temperature, °C, Max ,Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Expressed- refined grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/viii(Unsaponifiable matter, percent by mass, Max, Expressed- refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Expressed- refined grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vii(Acid value, Max, Expressed- refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/vi(Iodine value (Wijs))	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/v(Saponification value)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/iv(Specific gravity at 30°C/30°C)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/iii(Refractive index at 40°C)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than ,Solvent Extracted - raw grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Solvent Extracted - refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Expressed- raw grade II)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Expressed- Raw grade I)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/ii(Colour on the Lovibond scale, expressed as (Y + 5R), not deeper than Expressed- refined grade)	-	500	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Solvent Extracted - raw grade)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Solvent Extracted - refined grade)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max, Expressed- Raw grade II)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max Expressed- Raw grade I)	-	750	-
Clause 5 and sub-clause 5.8/ Table 1/i(Moisture and insoluble impurities,percent by weight,Max Expressed- refined grade)	-	750	-
Clause 5 and sub-clause 5.7(TBHQ)	-	500	-
Clause 5 and sub-clause 5.7(BHT)	-	500	-
Clause 5 and sub-clause 5.7(BHA)	-	500	-
Clause 5 and sub-clause 5.7(Ascorbyl Esters)	-	500	-
Clause 5 and sub-clause 5.7(Propyl Gallate)	-	500	-
Clause 5 and sub-clause 5.6(pesticide residues)	-	1500	-
Clause 5 and sub-clause 5.6(Metal contaminants)	-	1600	-
Clause 5 and sub-clause 5.5(Baudouin Test)	-	500	-
Clause 5 and sub-clause 5.3(Presence of non-edible oils and adultrants (Karanja Oil, Argemone Oil, Hydrocyanic acid, Mineral Oil, KUSUM OIL AND OTHER OILS CONTAINING CYANOGENIC COMPOUNDS, CASTOR OIL, NEEM OIL))	-	5000	-
Clause 5 and sub-clause 5.4(Aflatoxin)	-	500	-
Clause 5 and sub-clause 5.2.1(Clarity of Material)	-	500	-
Clause 5 and sub-clause 5.2(Oil Soluble Colour)	-	500	-
Clause 5 and sub-clause 5.2(Peroxide Value)	-	500	-
Clause 5 and sub-clause 5.2(Description)	-	250	-

Complete

17 Jun, 2024

-
-

IS 543 (2018)

Cottonseed oil - Specification (Third Revision)

24400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no i)(Moisture and insoluble impurities)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ii)(Colour on the Lovibond scal)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iii)(Refractive index)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no iv)(Specific gravity)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no v)(Saponification value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no vi)(Iodine value)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7(Table 1, S. no vii)(Acid value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no viii)(Unsaponifiable matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no ix)(Polenske value)	-	500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no x)(Flash point)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no xi)(Hexane)	-	1500	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.7 (Table 1, S. no xii)(Refining loss)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no i)(Lead)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no ii)(Arsenic)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iii)(Cadmium)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 5.8.1.3 (Table 2, S. no iv)(Mercury)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl. 7(MARKING)	-	250	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 542 (2018)

Coconut oil - Specification (Third Revision)

19600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Description)	-	250	-
Cl. 5.7 (Table 1, S. no i)(Moisture and insoluble impurities)	-	750	-
Cl. 5.7 (Table 1, S. no ii)(Colour on the Lovibond scal)	-	500	-
Cl. 5.7 (Table 1, S. no iii)(Refractive index)	-	500	-
Cl. 5.7 (Table 1, S. no iv)(Specific gravity)	-	500	-
Cl. 5.7 (Table 1, S. no v)(Saponification value)	-	750	-
Cl. 5.7 (Table 1, S. no vi)(Iodine value)	-	600	-
Cl. 5.7(Table 1, S. no vii)(Acid value)	-	500	-
Cl. 5.7 (Table 1, S. no viii)(Unsaponifiable matter)	-	750	-
Cl. 5.7 (Table 1, S. no ix)(Polenske value)	-	500	-
Cl. 5.7 (Table 1, S. no x)(Flash point)	-	500	-
Cl. 5.7 (Table 1, S. no xi)(Hexane)	-	1500	-
Cl. 5.8.1.3 (Table 1, S. no i)(Lead)	-	500	-
Cl. 5.8.1.3 (Table 1, S. no ii)(Arsenic)	-	500	-
Cl. 5.8.1.3 (Table 1, S. no iv)(Mercury)	-	500	-
Cl. 7(MARKING)	-	250	-

Complete

17 Jun, 2024

-
-

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(CARBON)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(SULPHUR)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(PHOSPHORUS)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(MANGANESE)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(SILICON)	-	300	For BIS samples: 1.5 times of BIS testing charges
6.0(NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.0(MICRO ALLOYS)	-	3200	For BIS samples: 1.5 times of BIS testing charges
6.0(ALUMINIUM)	-	400	For BIS samples: 1.5 times of BIS testing charges
Cl 7(UTM)	-	5150	For BIS samples: 1.5 times of BIS testing charges
Cl 8.5(Workmanship)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl 8.6(Workmanship)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl 9(Workmanship)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl 10(Length, Width & Thickness)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

11500 View breakup
Rs.11500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1( Description)	-	250	-
Cl No 3.2(Miscibility with Water)	-	1000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	2500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	750	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	1000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	1000	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	1000	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	1000	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	1000	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	1000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	2500	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	2500	-

Complete

17 Jun, 2024

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
4.1.1(INSULATION : General Purjose Insulaiion)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
4.1.2(INSULATION : Heat Resisting Insulation)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
6.1(MATERIALS : ARMGURING)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
6.2(MATERIALS : ARMGURING)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
8.1(CONSTRUCTION : CONDUCTOR)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
8.2(CONSTRUCTION : CONDUCTOR)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
9.1(INSULATION )	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
9.2(INSULATION : Thickness of Insulation)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
9.4(INSULATION : Application of Insulation)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
10.1(CORE IDENTIFICATION)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
10.2(CORE IDENTIFICATION)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
10.3(CORE IDENTIFICATION)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
11.1(LAYING UP OF CORES)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
11.2(LAYING UP OF CORES)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
12.1(INNER SHEATH)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
12.2(INNER SHEATH)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.1.1(ARMOURING : Application)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.1.2(Armouring: Coverage )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.1.3(ARMOURING : Direction of lay )	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.1.4(ARMOURING : Application)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.2(ARMOURING : Type of Armour)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.2.1(ARMOURING : Type of Armour)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.3(Armouring : Dimensions -Wire Diameter)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.3(Armouring : Dimensions -Formed wire )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.4(ARMOURING : Joints)	-	50	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.5.1(ARMOURING : Resistance)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.5.2(ARMOURING : Resistance)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.6 a)(ARMOURING: Tensile Strength)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.6 b)(ARMOURING: Elongation )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
13.6 g)(ARMOURING: Resistivity)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
14.1(OUTER SHEATH)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
14.2(OUTER SHEATH)	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
14.3(OUTER SHEATH : Colour )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)1)(Physical tests for sheath : Elongation )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	100	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)4)(Hot deformation : Insulation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)4)(Hot deformation : Sheath )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)5)( Loss of mass in air oven- sheath )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)6)(Heat shock test- Insulation )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)6)(Heat shock test- sheath )	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)7)(Thermal stability- insulation )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 d)7)(Thermal stability- Sheath )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 e)(Insulation resistance test : IR Constant )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 f)(High voltage test ( water immersion test ))	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 g)(High voltage test at room temperature)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1 g)(High voltage test at room temperature)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.4 a)(Cold bend test- Insulation ( Optional test))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.4 a)(Cold bend test- Sheath ( Optional test))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.4 b)(Cold impact test- Insulation ( Optional test))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.4 b)(Cold impact test- Sheath ( Optional test))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.4(Flammability Test)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.5(Oxygen Index Test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.6(Flame Retardance Test on Single Cables)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.7(Flame Retardance Test on Bunched Cables)	-	5000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.9(Test for Halogen Acid Gas Evolution)	-	2500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.1(Temperature Index)	-	3000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	3000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.4(Flammability Test- Un affected portion)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
16.4(Flammability Test- Period of Burning)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
9.3(Minimum Thickness of Reduce core insulation)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
9.2(Thickness of Reduce core insulation)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	200	For BIS samples: 1.5 times of BIS testing charges, For others: Rs. 5000/- for single core unarmoured cable, Rs. 1500/- extra for each additional core, Rs. 1000/- extra for armoured cable, Rs. 10000/- for FR, Rs. 14000/- for FRLSH

Complete

17 Jun, 2024

-
-

IS 1110 (1990)

Ferrosilicon (Bi-lingual)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Boron-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Zirconium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method)	-	1000	-

Complete

17 Jun, 2024

-
-

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & finish - IS 2202(Pt-1))	-	250	For BIS samples: 1.5 times of BIS testing charges
9.2(Workmanship & finish - IS 2202(Pt-1))	-	250	For BIS samples: 1.5 times of BIS testing charges
9.3(Workmanship & finish - IS 2202(Pt-1))	-	250	For BIS samples: 1.5 times of BIS testing charges
11.1(Height - IS 4020 (Pt-2))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.1(Width- IS 4020 (Pt-2))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.1(Thickness - IS 4020 (Pt-2))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.1(Variation in thickness - IS 4020 (Pt-2))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.1( Squareness Test - IS 4020 (Pt-2))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	300	For BIS samples: 1.5 times of BIS testing charges
11.3(Depth of deviation - IS 4020(Pt-4))	-	200	For BIS samples: 1.5 times of BIS testing charges
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.4(Depth of indentation - IS 4020(Pt-5))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	250	For BIS samples: 1.5 times of BIS testing charges
11.5(Residual deflection - IS 4020(Pt-6))	-	250	For BIS samples: 1.5 times of BIS testing charges
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.6(Residual deflection after removal of load - IS 4020(Pt-7))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.6(Lateral buckling during loading - IS 4020(Pt-7))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.6(Residual lateral buckling - IS 4020(Pt-7))	-	150	For BIS samples: 1.5 times of BIS testing charges
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.8(Buckling Test - IS 4020(Pt-9))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.8(Initial deflection - IS 4020(Pt-9))	-	0	For BIS samples: 1.5 times of BIS testing charges
11.8(Residual deformation after 15 minutes of unloading - IS 4020(Pt-9))	-	0	For BIS samples: 1.5 times of BIS testing charges
11.9(Slamming Test - IS 4020(Pt-10))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.1(Misuse Test - IS 4020(Pt-11))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	3000	For BIS samples: 1.5 times of BIS testing charges
11.11(Maximum departure from the general planeness - IS 4020(Pt-12))	-	0	For BIS samples: 1.5 times of BIS testing charges
11.11(The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12))	-	0	For BIS samples: 1.5 times of BIS testing charges
11.12(End Immersion Test - IS 4020(Pt-13))	-	1500	For BIS samples: 1.5 times of BIS testing charges
11.13(Knife Test - IS 4020(Pt-14))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16))	-	500	For BIS samples: 1.5 times of BIS testing charges
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	250	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	10000	For BIS samples: 1.5 times of BIS testing charges
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	10000	For BIS samples: 1.5 times of BIS testing charges
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	For BIS samples: 1.5 times of BIS testing charges
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	10000	For BIS samples: 1.5 times of BIS testing charges
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	10000	For BIS samples: 1.5 times of BIS testing charges
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	750	For BIS samples: 1.5 times of BIS testing charges
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	750	For BIS samples: 1.5 times of BIS testing charges
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1200	For BIS samples: 1.5 times of BIS testing charges
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	700	For BIS samples: 1.5 times of BIS testing charges
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	For BIS samples: 1.5 times of BIS testing charges
9.1(PIPE ENDS)	-	250	For BIS samples: 1.5 times of BIS testing charges
8(SEALING RINGS)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	For BIS samples: 1.5 times of BIS testing charges
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	For BIS samples: 1.5 times of BIS testing charges
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	For BIS samples: 1.5 times of BIS testing charges
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	For BIS samples: 1.5 times of BIS testing charges
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	For BIS samples: 1.5 times of BIS testing charges
7.2.1(DIMENSIONS-Socket)	-	250	For BIS samples: 1.5 times of BIS testing charges
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	For BIS samples: 1.5 times of BIS testing charges
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	For BIS samples: 1.5 times of BIS testing charges
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	100	For BIS samples: 1.5 times of BIS testing charges
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	For BIS samples: 1.5 times of BIS testing charges
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	For BIS samples: 1.5 times of BIS testing charges
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	For BIS samples: 1.5 times of BIS testing charges
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	For BIS samples: 1.5 times of BIS testing charges
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	For BIS samples: 1.5 times of BIS testing charges
5(CLASSIFICATION OF PIPES)	-	100	For BIS samples: 1.5 times of BIS testing charges
Clause 10.7(Sulphated Ash Content)	-	1000	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 1165 (2002)

Milk Powder (Bi-lingual)

- View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5 and 5 of IS 5116 .(IS 5116)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 5 and 5 of IS 5116 .(All copper and copper alloy parts shall pass mercurous nitrate test .)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 5 and 5 of IS 5116 .(IS 5116)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 5 and 5 of IS 5116 .(IS 5116)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 5 and IS 5116 .Surface of Glass Or Glass Ceramic(IS 5116)	-	250	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
IS 5116 .(Toughened glass shall fragment into small particles.)	-	500	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
IS 5116 .(The number of glass fragments contained in a square of side 50mm located in the area of the largest pieces shall be at least 40 numbers. (Test Method as per Cl.15.2))	-	500	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 6 , DESIGN FOR MAINTENANCE(Cl 6.1)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 6.2(The parts of burner shall not become disconnected during operation of appliance.the centers of adjoining burner shall not be less than 180 mm.)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 7(Cl 7)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
4.1 of IS 5116(General)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
4.1.1(General)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
4.2 of IS 5116(General)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5 (5.1 of IS 5116)(Materials)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5 (5.1.1 of IS 5116)(Materials)	-	250	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5 (5.2 of IS 5116)(Materials)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5 (5.3 of IS 5116)(Materials)	-	200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5 (5.4 of IS 5116)(Materials)	-	300	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5 (5.5 of IS 5116)(Materials)	-	200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5 (5.7 of IS 5116)(Materials)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
5.1 of IS 4246(Materials)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
6.1(Mechanical (Design for Maintenance))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
6.2(Mechanical (Design for Maintenance))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
6.3(Mechanical (Design for Maintenance))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
6.4(Mechanical (Design for Maintenance))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
6.5(Mechanical (Design for Maintenance))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
6.6(Mechanical (Design for Maintenance))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
7(Rigidity and Stability)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.1 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.2 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.3 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.3.1 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.3.2 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.3.3 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.4.1 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.4.2 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.5 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.6 of IS 5116)(Mechanical (Workmanship and Finish))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.1 (7.7 of IS 5116)(Mechanical (Workmanship and Finish))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.2(Mechanical (Workmanship and Finish))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
8.3(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.1 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.2 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.3 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.4 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.5 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.5.1 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.6 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.7 of IS 5116 )(Taper plug taps shall have dimensional allowances when in 'OFF' position given in Fig. 4.(A 1.1 Min)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.7 of IS 5116 )(Taper plug taps shall have dimensional allowances when in 'OFF' position given in Fig. 4.(B 0.4 Min))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.7 of IS 5116 )(Taper plug taps shall have dimensional allowances when in 'OFF' position given in Fig. 4.(C 3.0 Min))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.7 of IS 5116 )(Taper plug taps shall have dimensional allowances when in 'OFF' position given in Fig. 4.(D 2.80 Min))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.7 of IS 5116 )(Taper plug taps shall have dimensional allowances when in 'OFF' position given in Fig. 4.(A1 1.2 Min))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.7 of IS 5116 )(Taper plug taps shall have dimensional allowances when in 'OFF' position given in Fig. 4.(B1 0.4 Min))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.7 of IS 5116 )(Taper plug taps shall have dimensional allowances when in 'OFF' position given in Fig. 4.(C1 3.0 Min))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.8 of IS 5116 )(All controls or taps shall be easy to operate at all temperatures normally attained in use.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.9 of IS 5116 )(Screws, nuts, etc, which regulate the tension of taps valve or springs, shall not loosen in operation of the appliance. It shall not be possible to cause a leak during normal manual operation of tap.)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.10 of IS 5116 )(Screw-down valves shall be so designed that it is impossible to withdraw completely the valve stem in the normal operation of the tap.)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.11 of IS 5116 )(Taps having an 'OFF' position shall have positive stops at the 'OFF' and simmer position except that special purpose taps (for appliance incorporating auto or self ignition device), for example, taps with simmering position in between 'OFF' and 'ON' may have a movement beyond the simmer position with a positive stop)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 9 (Cl 8.11.1 of IS 5116 )(Simmer flame shall be obtained by fixed simmer orifice.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
9 (8.12 of IS 5116)(Mechanical (Workmanship and Finish))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 10 (cl 9.1 of 1S 51 I6 )(The injector Jets shall be fixed calibrated type and it shall not be possible to loosen them without the use of tools. The dimensions of the injector Jet shall conform to the following requirements: Across flats 6 mm. nominal M 5 or 1BA)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 10 (cl 9.1 of 1S 51 I6 )(Projection from the face of mounting)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 10 (cl 9.1 of 1S 51 I6 )(Threads 6 mm, Min)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 10 (cl 9.1.1 of 1S 51 I6 )(Injector Jet shall be made of metal, with or without ceramic tip. The melting point of the metal shall not be less than 650°C.)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 10 (cl 9.2 of 1S 51 I6 )(The size of the Jet in litres per hour of flow of LPG at STP conditions shall be impressed upon it.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 11 (cl 10.1 of 1S 51 I6 )(The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools (see Fig. 5 for guidance).)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 11 (cl 10.2 of 1S 51 I6 )(The burner supports shall be rigid and shall be fixed in their place. Their construction shall ensure the stability of the burners and shall prevent their undue movement in a horizontal plane.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 11 (cl 10.3 of 1S 51 I6 )(The lightness of the joints in the burner assembly shall not depend upon adhesives or any kind ot packmg)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 11 (cl 10.4 of 1S 51 I6 )(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place ( see Fig. 6 ).)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 11 (cl 10.5 of 1S 51 I6 )(If the burner is made and assembled in two or more parts they shall be so designed to provide proper self-locating arrangement so that they are always re-assembled to its original design preventing any maladjustment in their assembly. This shall also be applicable for primary air regulators.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 11.2(For burners having centre flame,provision shall be made to protect the centre flame from pans resting directly on burner top and smothering the centre flame.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 11 .3(The stove comprising two or more burners shall include one burner having a rating of at least 1490 kcal/h, based on net calorific value of the gas ( when using commercial butane).)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 12.1(The design of the pan supports shall be such that it is practicable to support a pan of 100mm diameter, over at least one top burner without the use of loose rings, and such that 125 mm diameter vessel remains stable over each burner. Prongs of the support shall have suitable taper to accommodate round bottom pans.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 12.1.1(Loose pan supports shall be so designed that it is not possible to place them firmly in other than proper position.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 13.1 (Cl 16 OF IS 5116)(All gas carrying parts of the appliance shall be sound and these parts when connected, to form a complete assembly shall also be soundagainst any gas leakage. The complete assembly shall also be sound against any gas leakage. The complete assembly shall be checked at 14.71 kN/m2 (approx 150 gf/cm2). The details of test are given in Annex J.)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 13.2 .1(The stove may be provided with a gas leak indicator. If gas leak indicator is provided, it shall conform to the requirements of IS 13432 (Part 1) or IS 13432 (Part 2).)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.1 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 14.1(Cl 18.2 of IS 5116)(Where nozzles for flexible tubing are fitted, they shall be so positioned as to facilitate fitting of the tubing and also to prevent heating of the tubing to more than 60°C. Shape of nozzles is given in Fig. 7.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.2 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.2 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.2 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.2 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.2 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.2 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 14.1(Cl 18.3 of IS 5116)(Screwed gas inlet and outlet connections shall have threads specified in 17.3.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 14.1(Cl 18.4 of IS 5116)(The pipe/tube used for main gas rail shall be of mild steel. The wall thickness of main gas rail shall be 1.6 mm + no Iimit/–0.15 mm.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 14.1(Cl 18.4 of IS 5116)(The external surface of the gas rail shall be treated to resist corrosion.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
14.1 (18.4 of IS 5116)(Mechanical (Gas Inlet Connection))	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 14.2(The position of the gas inlet shall allow connection to a gas supply on either side of the appliance. Inlet connection at the rear is also permitted. It shall be possible to change gas inlet from one side to other side easily by standard tools.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl.15(When tested as specified in Annex C, the vertical resultant deflection of the top surface measured at the centre of length of the body, shall not exceed 2 mm and the distance between the opposite sides (lengthwise and widthwise) shall not change by more than 5 mm.)	-	200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 17.1(Each burner assembly under separate ‘ON/OFF’ control shall give + 8 percent of the manufacturers’ specified gas consumption in I/h or heat input in kcaVh at 2942 kN/m2 (30 gf/cmz))	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
17.1.2(Gas Consumption)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl17.2.1(It shall be possible to reduce the consumption rate of the burner to the following extent by providing a fixed simmer orifice in the gas tap: a) For burners up to 60 I/h gas rate, 35 percent of the rated capacity; and)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl17.2.1(b) For burners above 60 I/h gas rate, 22 I/h or 26 percent of the rated capacity whichever is higher.)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl17.2.2(When the gas consumption of a burner is reduced to simmer as described in 17.2, the flame shall not extinguish, blow off, strike back or form soot when tested with commercial LPG at 2942 kN/m2 (30 gf/cm2) gas inlet pressure.)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
cl 18.1(There shall be easy and safe access for lighting and relighting each burner by a match stick and it shall be easy to see that the burner is lighted. Where)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
cl 18.1(the burner or burners are lighted by automatic ignition (battery of flint-operated) or by a pilot flame, it shall not be possible for gas to be admitted to the main burner without being smoothly ignited by the pilot flame. Each burner should be at room temperature at the beginning of the test and should be tested in turn)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
cl 18.2(If a flame is applied to any of the outer row of the burner ports when the gas is flowing, flame travel shall be complete. This applies for the all pressures from 2452 to 3432 kN/m2 (25 to 35 gf/cm2), taps being fully opened and without a pan over the burner.)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl18.3(When the burner is ignited from a pilot flame and / or by an electric/electronic method, the ignition and flame travel shall be smooth at pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2) with the burner tap turned full ‘ON’ and ignition shall be effected without undue delay after turning on taps)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl18.4 (Cl14 of IS 5116)(Shall prevent gas from being supplied to the main burner until the pilot flame, if provided, is established;)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl18.4 (Cl14 of IS 5116)(Shall, after flame failure, stop all gas flow to the main burner;)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl18.4 (Cl14 of IS 5116)(Shall be actuated only by a pilot flame, if provided, to ignite the main burner without failure or delay;)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl18.4 (Cl14 of IS 5116)(Shall open and close in times not exceeding the following limits:Opening from cold Closing from the fully heated condition Time Manually Non-manually Operated, Operated, seconds seconds 40 90 75 90)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl18.4 (Cl14 of IS 5116)(Shall be free from any weakness in design which will give rise to failure to danger; and)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl18.4 (Cl14 of IS 5116)(Shall be protected against adjustment by unauthorized persons.)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
18.4 (14.2 of IS 5116)(Ignition and Flame travel)	-	50	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 19.1(It shall be possible to operate the appliance with taps fully open at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gflcmz to 35 gf/cm2) without the flame extinguishing, blowing off or striking back and without the formation of soot)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 19.1.1(When the gas consumption of a burner is reduced to simmer after operating for half an hour at full ‘ON’, the flame shall not extinguish, blow off, strike back or form soot when tested with commercial LPG at 2942 kN/m2 (30 gf/cm2) gas inlet pressure.)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 19.2(Pilot flames shall be stable, without lifting or soot deposition, at gas inlet pressure from 2 452kN/m2to3432 kN/m2 (25 gf/cm2 to 35 gf7cm2).)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl19.3(The fixed minimum pilot rate shall be sufficient to relight the main burnerat2452 kN/m2 (25 gf/cm2) gas inlet pressure.)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl.20(The ignition of the burner flames, their operation and turning ‘OFF’ shall not give rise to undue or excessive noise during all the operations.)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
21(Flash Back)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl 22(A vessel, 150 mm diameter, full of water, shall be placed on the burner and the burner lighted at ‘ON’ position of the tap for one hour. After the test, no soot (unburned carbon) shall be deposited on the burner and on the bottom of the vessel. This applies for all pressures from 2452 kN/m2 to 3432 kNlm2 (25 gf/cm2 to 35 gf/cm2))	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl.23(There shall be no extinction of the flames on any of the burners operating at maximum consumption when the appliance is placed in a general (not localized) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the appliance relative to neighboring walls and the direction of the draught shall be varied to correspond to likely conditions of appliance installation. This applies for all pressures from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).)	-	150	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
Cl.24(Annexure E)(on no account the carbon monoxidel carbon dioxide ratio of the exhaust gases of any burner. operating at any consumption at which the burner is stable at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.)	-	250	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	250	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
25.1 ( 23.1 of IS 5116 )(Fire Hazard and Limiting Temperatures)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
25.1 ( 23.2 of IS 5116 )(Fire Hazard and Limiting Temperatures)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
25.1 ( 23.2.1 of IS 5116 )(Fire Hazard and Limiting Temperatures)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
25.1 ( 23.2.2 of IS 5116 )(Fire Hazard and Limiting Temperatures)	-	100	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
25.2(Fire Hazard and Limiting Temperatures)	-	200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
26 (for burner 1)(Thermal Efficiency)	-	500	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
26 (for burner 2)(Thermal Efficiency)	-	1200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
26 (for burner 3)(Thermal Efficiency)	-	1200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
26 (for burner 4)(Thermal Efficiency)	-	1200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.
26 (for burner 5)(Thermal Efficiency)	-	1200	For BIS Samples: 1.5 times of BIS testing charges, For other: Rs. 9800/-, Rs. 1200/- extra for each additional burner.

Complete

17 Jun, 2024

-
-

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 6.1.1, Table-1( CARBON)	-	300	For BIS samples: 1.5 times of BIS testing charges
Clause - 6.1.1, Table-1(SULPHUR)	-	300	For BIS samples: 1.5 times of BIS testing charges
Clause - 6.1.1, Table-1(PHOSPHURS)	-	300	For BIS samples: 1.5 times of BIS testing charges
Clause - 6.1.1, Table-1(MANGANESE)	-	300	For BIS samples: 1.5 times of BIS testing charges
Clause - 6.1.1, Table-1(NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Clause - 6.1.1, Table-1(SILICON)	-	300	For BIS samples: 1.5 times of BIS testing charges
Clause - 6.1.1, Table-1( ALUMINIUM)	-	300	For BIS samples: 1.5 times of BIS testing charges
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	750	For BIS samples: 1.5 times of BIS testing charges
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	750	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.3(Dimensional Requirements - Thickness - Annexure E)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	For BIS samples: 1.5 times of BIS testing charges
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	100	For BIS samples: 1.5 times of BIS testing charges
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	500	For BIS samples: 1.5 times of BIS testing charges
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	500	For BIS samples: 1.5 times of BIS testing charges
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	500	For BIS samples: 1.5 times of BIS testing charges
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	500	For BIS samples: 1.5 times of BIS testing charges
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	500	For BIS samples: 1.5 times of BIS testing charges
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	500	For BIS samples: 1.5 times of BIS testing charges
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	For BIS samples: 1.5 times of BIS testing charges
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	1000	For BIS samples: 1.5 times of BIS testing charges
9.2.3(Adhesion of Plies - Annexure H)	-	500	For BIS samples: 1.5 times of BIS testing charges
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	3000	For BIS samples: 1.5 times of BIS testing charges
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1000	For BIS samples: 1.5 times of BIS testing charges
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1000	For BIS samples: 1.5 times of BIS testing charges
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1000	For BIS samples: 1.5 times of BIS testing charges
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1000	For BIS samples: 1.5 times of BIS testing charges
9.2.6(Spot test - Annexure L)	-	1000	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Aluminium Content)	-	500	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Aluminium Content)	-	500	---
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Silicon Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Silicon Content)	-	500	---
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	500	--
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	500	--
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	500	---
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	500	---
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	500	--
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	500	---
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	500	---
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Magnesium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Magnesium Content)	-	500	---
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Iron Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Iron Content)	-	500	--
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Manganese Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Manganese Content)	-	500	---
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Zinc Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Zinc Content)	-	500	--
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Titanium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Titanium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Chromium Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Chromium Content)	-	500	----
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	500	--
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500 (Copper Content)	-	500	---
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000 (Copper Content)	-	500	---
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	500	---
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	500	---
4.1 .3(Workmanship and Appearance)	-	500	---
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1000	-
4.1.5(Rubber Ring)	-	500	--
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	500	--
6.1.1, 6.1.1.1(Leakage Test)	-	1000	---
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	1000	----
6.1.3, 6.1.3.1(Weldability Test)	-	2000	---

Complete

17 Jun, 2024

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Annealing test (for copper))	-	500	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.1(Tensile test (for Al)-Before Stranding)	-	250	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.1(Tensile test (for Al)- After Stranding)	-	250	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.1(Wrapping test (for Al))	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.2(Conductor resistance test)	-	500	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.11(Per sulphate test (for tinned Cu cable only))	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
9(Overall dimensions)	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
9.1(Ovality)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
5.3(Thickness of Insulation)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
5.2(Application )	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
8.3(Thickness of Sheath)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 1)(Elongation (Without ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 3)(Elongation (After ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 3)(TS variation)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 3)(Elongation variation)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 3)(Sheath- TS variation)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 4)(Cracks Observed)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 4)(Cracks Observed)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 5)(Heat shock-Insulation )	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 5)(Heat shock-Sheath )	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1(Category Code)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 8)(Cold bend for insulation)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) c) 9)(Cold impact for insulation)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 8)(Cold bend for sheath)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 1 iii) d) 9)(Cold impact for sheath)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.5(Oxygen index)	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.7(Temperature index)	-	3000	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.6(Halogen evolution)	-	5000	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.8(Smoke density rating)	-	3000	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.1(HV (water immersion))	-	300	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.1(HV (water immersion))	-	1500	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.2(HV (room temperature))	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
table 1 e) 3) (Volume Resistivity - Room temp )	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
table 1 e) 3) (IR constant- Room temp )	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
table 1 e) 3) (IR constant- max. Temp)	-	200	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.4(Flammability test-Burning after flame removal)	-	250	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.4(Flammability test- Unaffected portion)	-	250	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1000	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
11(Identification)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
11.1(Durability)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
11.2(Legibility)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
13(Cable code)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
12(CONSTRUCTION Core Identification)	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
8.1(Sheath Material )	-	100	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
7(Binder Tape)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
6.2(Filler)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
6.1(Filler)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
5.1(Insulation)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.4(Joints in Conductor)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.4(Joints in Conductor)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.1(Conductor - Material)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4.1(Conductor - Material)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
4, IS 8130(Construction of conductor)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 2, IS 8130(No fo wire in a conductor)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
8.3(Minimum thickness of Sheath)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
8.3(Avarage thickness of Sheath)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
5.3(Minimum thickness of insulation)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
5.3(Avarage thickness of insulation)	-	50	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.
Table 4(Copper purity test)	-	4000	For BIS samples: 1.5 times of BIS testing charges. For others: Rs. 10000/- for single core, Rs. 1000/- for each additional core, Rs. 10000/- for FR, Rs. 14000/- for FRLSH.

Complete

17 Jun, 2024

-
-

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	500	-
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	500	-
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1000	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	100	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	100	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	100	-
7.3.1(No.of Ribs)	-	100	-
7.3.2(Rib height)	-	100	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	100	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	100	-
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	100	-
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	100	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	100	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	100	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	100	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	100	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	100	-
8.4(Sealing rings - Hardness)	-	300	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	100	-
9.1(Visual Appearance)	-	300	-
9.2(Internal Diameter)	-	500	-
9.3(Density IS 12235 (Part 14))	-	1000	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1000	-
9.5(Tensile Strength IS 12235(Part 13))	-	1500	-
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1000	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	2000	-

Complete

17 Jun, 2024

-
-

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

8150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Listeria monocytogenes)	-	500	-
5.6(Spore count, Anaerobic (Sulfite reducing Clostridia))	-	250	-
5.6(Spore count, Aerobic (Bacillus cereus))	-	250	-
5.6(Salmonella)	-	500	-
5.6(Coagulase positive Staphylococcus aureus)	-	500	-
5.6(Escherichia coli)	-	500	-
5.6(Coliform count )	-	500	-
5.6(Bacterial count)	-	500	-
5.6(Scorched particles)	-	550	-
5.6(Titratable acidity (lactic acid))	-	550	-
5.6(Total ash (on dry basis))	-	550	-
5.6(Insolubility index)	-	550	-
5.6(Milk fat)	-	550	-
5.6(Milk protein in milk solids not fat)	-	500	-
5.6(Moisture)	-	500	-
5.2(Absence of extraneous matter, added colour and added flavour)	-	300	-
4(Description)	-	300	-
Cl 5.4(The flavour of the product or of the reconstituted milk shall be pleasant and clean (see IS 10030).)	-	300	-

Complete

17 Jun, 2024

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(CARBON)	-	300	For BIS samples: 1.5 times of BIS testing charges
7.0(SULPHUR)	-	300	For BIS samples: 1.5 times of BIS testing charges
7.0(PHOSPHORUS)	-	300	For BIS samples: 1.5 times of BIS testing charges
7.0(MANGANESE)	-	300	For BIS samples: 1.5 times of BIS testing charges
7.0(SILICON)	-	300	For BIS samples: 1.5 times of BIS testing charges
7.0(NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges
7.0(ALUMINIUM)	-	400	For BIS samples: 1.5 times of BIS testing charges
7.0(MICRO ALLOYS)	-	3200	For BIS samples: 1.5 times of BIS testing charges
8(Mechanical and Physical Properties)	-	7150	For BIS samples: 1.5 times of BIS testing charges
Cl 9.5(Workmanship)	-	1000	For BIS samples: 1.5 times of BIS testing charges
Cl 9.6(Workmanship)	-	300	For BIS samples: 1.5 times of BIS testing charges
Cl 10(Workmanship)	-	250	For BIS samples: 1.5 times of BIS testing charges
Cl 11(Length, Width & Thickness)	-	500	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

18000 View breakup
Rs.18000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4 i)(Dieldrin)	-	125	N.A.
5.4 i)(Aldrin)	-	125	N.A.
5.4 i)(Malaoxon)	-	250	N.A.
5.4 i)(Malathion)	-	250	N.A.
5.4 i)(Methyl Paraoxon)	-	250	N.A.
5.4 i)(Methyl Parathion)	-	250	N.A.
5.4 i)(Atrazine)	-	250	N.A.
5.4 i)(Alachlor)	-	250	N.A.
5.4 i)(Isoproturon)	-	250	N.A.
5.4 i)(Butachlor)	-	250	N.A.
5.4 i)(2,4-D)	-	250	N.A.
5.4 i)(phorate sulphone)	-	250	N.A.
5.4 i)(Phorate sulphoxide)	-	250	N.A.
5.4 i)(Phorate)	-	250	N.A.
5.4 i)(Chlorpyrifos)	-	250	N.A.
5.4 i)(Ethion)	-	250	N.A.
5.4 i)(Monocrotophos)	-	250	N.A.
5.4 i)(Endosulfan Sulphate)	-	83	N.A.
5.4 i)(beta-Endosulfan)	-	83	N.A.
5.4 i)(alpha-Endosulfan)	-	83	N.A.
5.4 i)(Delta-HCH)	-	83	N.A.
5.4 i)(beta-HCH)	-	83	N.A.
5.4 i)(alpha-HCH)	-	83	N.A.
5.4 i)(Gamma-HCH (Lindane))	-	250	N.A.
5.4 i)(p,p DDD)	-	42	N.A.
5.4 i)(o,p DDD)	-	42	N.A.
5.4 i)(p,p DDE)	-	42	N.A.
5.4 i)(o,p DDE)	-	42	N.A.
5.4 i)(p,p DDT)	-	42	N.A.
5.4 i)(o,p DDT)	-	42	N.A.
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	350	N.A.
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	350	N.A.
5.3 Table-3 vii (Nickel (as Ni))	-	200	N.A.
5.3 Table-3 vi(Chromium (as Cr))	-	200	N.A.
5.3 Table-3 v (Lead (as Pb))	-	200	N.A.
5.3 Table-3 iv (Cyanide (as CN))	-	250	N.A.
5.3 Table-3 iii (Arsenic (as As))	-	200	N.A.
5.3 Table-3 ii (Cadmium (as Cd))	-	200	N.A.
5.3 Table-3 i (Mercury (as Hg))	-	200	N.A.
5.3 Table-2 xxiv (Borates (as B))	-	100	N.A.
5.3 Table-2 xxiii (Antimony (as Sb))	-	200	N.A.
5.3 Table-2 xxii (Sulphide (as H2S))	-	100	N.A.
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	100	N.A.
5.3 Table-2 xx (Mineral oil)	-	400	N.A.
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	100	N.A.
5.3 Table-2 xviii (Residual free chlorine)	-	100	N.A.
5.3 Table-2 xvii (Sodium (as Na))	-	200	N.A.
5.3 Table-2 xvi (Magnesium (as Mg))	-	250	N.A.
5.3 Table-2 xv (Calcium (as Ca),)	-	250	N.A.
5.3 Table-2 xiv (Alkaliniity (as HCO3))	-	250	N.A.
5.3 Table-2 xiii (Sulphate (as SO4),)	-	250	N.A.
5.3 Table-2 xii (Selenium (as Se),)	-	200	N.A.
5.3 Table-2 xi (Chloride (as Cl))	-	250	N.A.
5.3 Table-2 x (Aluminium (as Al))	-	200	N.A.
5.3 Table-2 ix (Silver (as Ag))	-	200	N.A.
5.3 Table-2 viii (Zinc (as Zn))	-	200	N.A.
5.3 Table-2vii (Fluoride (as F))	-	250	N.A.
5.3 Table-2 vi (Nitrite (as NO2))	-	250	N.A.
5.3 Table-2 v (Nitrate (as NO3))	-	250	N.A.
5.3 Table-2 iv (Manganese (as Mn))	-	200	N.A.
5.3 Table-2 iii (Iron (as Fe),)	-	200	N.A.
5.3 Table-2 ii (Copper (as Cu))	-	200	N.A.
5.3 Table-2 i (Barium (as Ba))	-	200	N.A.
5.3 Table-1vi (pH)	-	100	N.A.
5.3 Table-1 v (Total dissolved solids)	-	250	N.A.
5.3 Table-1 iv(Turbidity)	-	200	N.A.
5.3 Table-1 iii (Taste)	-	100	N.A.
5.3 Table-1 ii (Odour)	-	100	N.A.
5.3 Table-1 i (Colour)	-	200	N.A.
5.3(Description)	-	100	N.A.
5.2.9(Vibrio parahaemolyticus)	-	500	N.A.
5.2.9(Vibrio cholera)	-	500	N.A.
5.2.8(Shigella)	-	500	N.A.
5.2.8(Salmonella)	-	500	N.A.
5.2.7(Yeast and Mould)	-	500	N.A.
5.2.6(Aerobic Microbial Count at 37°C)	-	250	N.A.
5.2.6(Aerobic Microbial Count at 20-22°C)	-	250	N.A.
5.2.5(Pseudomonas Aeruginosa)	-	500	N.A.
5.2.4(Sulphite Reducing Anaerobes)	-	500	N.A.
5.2.3(Staphylococcus Aureus)	-	500	N.A.
5.2.3(Faecal Streptococci)	-	500	N.A.
5.2.2(Coliform)	-	500	N.A.
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	500	N.A.

Complete

17 Jun, 2024

-
-

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Capacity)	-	750	-
5.1.1(Body, Lid, Containers and Grid)	-	500	-
5.1.2(Body, Lid, Containers and Grid)	-	500	-
5.1.3(Body, Lid, Containers and Grid)	-	500	-
5.1.4(Body, Lid, Containers and Grid)	-	500	-
5.2(Safety Relief Device)	-	500	-
5.3(Gasket)	-	500	-
5.4(Handles and Knobs)	-	500	-
5.5(Pressure Regulating Device)	-	500	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	500	-
5.7(Vent Pipe)	-	500	-
5.8(Vent Pipe Nut)	-	500	-
5.9(Spring)	-	500	-
6(CONSTRUCTION)	-	500	-
6.1(Pressure Regulating Device)	-	100	-
6.1.1(Pressure Regulating Device)	-	100	-
6.1.2(Pressure Regulating Device)	-	100	-
6.1.3(Pressure Regulating Device)	-	100	-
6.1.4(Pressure Regulating Device)	-	100	-
6.1.5(Pressure Regulating Device)	-	100	-
6.2(Safety Relief Device)	-	100	-
6.2.1(Safety Relief Device)	-	100	-
6.2.2(Safety Relief Device)	-	100	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	500	-
6.3.2(The cooker shall satisfy the type test prescribed in Annex D.)	-	500	-
6.4.1(Handles and Knobs)	-	100	-
6.4.1.1(Handles and Knobs)	-	2000	-
7.1(WORKMANSHIP AND FINISH)	-	200	-
7.2(WORKMANSHIP AND FINISH)	-	200	-
7.3(WORKMANSHIP AND FINISH)	-	200	-
7.4(WORKMANSHIP AND FINISH)	-	500	-
8.1(Air Pressure Test)	-	750	-
8.2(Proof Pressure Test)	-	750	-
8.3(Operating Test for Pressure Regulating Device)	-	750	-
8.4(Test for Safety Pressure Relief Device)	-	1000	-
8.5(Bursting Pressure Test)	-	1500	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	500	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	500	-
8.8(Test for Spring Loaded Mechanism)	-	3000	-
8.9(Test for Spring Loaded Mechanism)	-	2500	-
8.10 (a)(Handles of the cooker- Resistance to Burning)	-	500	-
8.10 (b)(Handles of the cooker- Heat Resistance)	-	500	-
8.10 (c)(Handles of the cooker- Torque Strength)	-	500	-
8.10 (d)(Handles of the cooker- Bending Strength)	-	500	-
8.10 (e)(Handles of the cooker- Fatigue Resistance)	-	500	-
8.10 (f)(Handles of the cooker- Thermal Insualtion Test)	-	500	-
8.10 NOTES (3)(Handles of the cooker - Proof Pressure)	-	150	-
8.10 NOTES (4)(Handles of the cooker)	-	150	-
8.10 NOTES (5)(Handles of the cooker)	-	150	-
8.10 NOTES (6)(Handles of the cooker)	-	150	-
8.11.1 (a)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	250	-
8.11.1 (b)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	250	-
8.11.1 (c)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	250	-
8.11.1.1 (Thermal shock test for externally coated cooker)	-	250	-
8.12.1(Internal Coating)	-	1000	-
8.14(3 Ply Construction Cooker Body)	-	2500	-

Complete

17 Jun, 2024

-
-

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	500	-
7.1.1(Accessories Classification)	-	50	-
7.1.2(Accessories Classification)	-	50	-
7.1.3(Accessories Classification)	-	50	-
7.1.4(Accessories Classification)	-	50	-
7.1.5(Accessories Classification)	-	50	-
7.2.1(Socket-Outlets Classification)	-	50	-
7.2.2(Socket-Outlets Classification)	-	50	-
7.2.3(Socket-Outlets Classification)	-	50	-
7.2.4(Socket-Outlets Classification)	-	50	-
7.3(Plug Classification)	-	100	-
8.1(MARKING)	-	100	-
8.8(MARKING)	-	100	-
8.9(MARKING)	-	100	-
9.1(CHECKING OF DIMENSIONS)	-	500	-
9.2(CHECKING OF DIMENSIONS)	-	200	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	-
11.1(PROVISIONS FOR EARTHING)	-	200	-
11.2(PROVISIONS FOR EARTHING)	-	200	-
11.3(PROVISIONS FOR EARTHING)	-	200	-
11.4(PROVISIONS FOR EARTHING)	-	200	-
11.5(PROVISIONS FOR EARTHING)	-	200	-
11.6(PROVISIONS FOR EARTHING)	-	200	-
12.1.1(TERMINALS)	-	100	-
12.1.2(TERMINALS)	-	100	-
12.2.1(TERMINALS)	-	100	-
12.2.2(TERMINALS)	-	100	-
12.2.3(TERMINALS)	-	100	-
12.2.4(TERMINALS)	-	100	-
12.2.5(TERMINALS)	-	100	-
12.2.6(TERMINALS)	-	100	-
12.2.7(TERMINALS)	-	100	-
12.2.8(TERMINALS)	-	100	-
12.2.9(TERMINALS)	-	100	-
12.2.10(TERMINALS)	-	100	-
12.2.11(TERMINALS)	-	100	-
12.3.1(TERMINALS)	-	100	-
12.3.2(TERMINALS)	-	100	-
12.3.3(TERMINALS)	-	100	-
12.3.4(TERMINALS)	-	100	-
12.3.5(TERMINALS)	-	100	-
12.3.6(TERMINALS)	-	100	-
12.3.7(TERMINALS)	-	100	-
12.3.8(TERMINALS)	-	100	-
12.3.9(TERMINALS)	-	100	-
12.3.10(TERMINALS)	-	300	-
12.3.11(TERMINALS)	-	300	-
12.3.12(TERMINALS)	-	300	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	500	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
15(INTERLOCKED SOCKET-OUTLETS)	-	300	-
16.1(RESISTANCE TO AGEING,)	-	500	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	-
16.3(Resistance to Humidity)	-	500	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	-
18(OPERATION OF EARTHING CONTACTS)	-	500	-
19(TEMPERATURE RISE)	-	500	-
20(BREAKING CAPACITY)	-	500	-
21(NORMAL OPERATION)	-	200	-
21(NORMAL OPERATION)	-	200	-
21(NORMAL OPERATION)	-	200	-
21(NORMAL OPERATION)	-	200	-
22.1(Verification of the Maximum Withdrawal Force)	-	200	-
22.2(Verification of Minimum Withdrawal Force)	-	200	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	200	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	100	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	100	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	100	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	100	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	100	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	100	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	100	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	100	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	100	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	100	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	100	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	100	-
24.15(MECHANICAL STRENGTH )	-	100	-
24.16(MECHANICAL STRENGTH )	-	100	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	100	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	250	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	250	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	250	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	250	-
25.4(RESISTANCE TO HEAT )	-	250	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	250	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	250	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	250	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	400	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	400	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	400	-
29(RESISTANCE TO RUSTING)	-	500	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	300	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	500	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	500	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	500	-
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	-
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	-
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	-
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	-

Complete

17 Jun, 2024

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List

No Record Found