BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List

Reset

155 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 303 (1989)

Plywood for General Purposes -

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	250	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2000	For BIS samples: 1.5 times of BIS testing charges
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	For BIS samples: 1.5 times of BIS testing charges
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 4159 (2002)

Mineral filled sheathed heating elements - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	200	NA
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	200	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	50	NA
Cl.8 of IS 4159:2002 & IS 302‐1:2008(Protection Against Electric Shock)	-	300	NA
Cl.10 of IS 4159:2002 & IS 302-1:2008(Input & Current)	-	500	NA
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	500	NA
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	500	NA
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	300	NA
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	300	NA
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	500	NA
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	500	NA
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	800	NA
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	800	NA
Cl.18 of IS 4159:2002(Endurance Test )	-	1500	NA
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	100	NA
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	100	NA
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	100	NA
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	100	NA
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	100	NA
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	100	NA
Cl.20 of IS 4159:2002 & IS 302-1: 2008(Stability & Mechanical Hazards )	-	500	NA
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	500	NA
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	200	NA
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	200	NA
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	200	NA
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	300	NA
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	200	NA
Cl.25 of IS 4159:2002 & IS 302-1: 2008(Supply connection & external flexible cables & cords)	-	500	NA
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	300	NA
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	500	NA
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	500	NA
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	100	NA
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	100	NA
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	100	NA
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	NA
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	NA
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	500	NA
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	500	NA
Cl. 31 of IS 4159:2002 & IS 302-1: 2008(Resistance to Rusting)	-	500	NA
Cl. 33.1 of IS 4159:2002(Finish Test )	-	300	NA
5(Ratings)	-	300	NA

Complete

17 Jun, 2024

-
-

IS 4989 : Part 4 (2003)

Multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires - Specification

- View breakup
Rs.31700/- (Provisional testing charges)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

- View breakup
Rs.5800.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

10000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	750	NA
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	750	NA
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	750	NA
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	750	NA
1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS)	-	750	NA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	1000	NA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	1000	NA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1000	NA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	1000	NA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	1000	NA
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	1000	NA
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	1000	NA
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	1000	NA
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	1000	NA
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS)	-	1000	NA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	750	NA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	750	NA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	750	NA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	750	NA
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	750	NA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	750	NA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	750	NA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	750	NA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	750	NA
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	750	NA
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	750	NA
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	750	NA
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	750	NA
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS)	-	750	NA
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	750	NA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	750	NA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1))	-	750	NA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	750	NA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	750	NA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS)	-	750	NA
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	750	NA
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	750	NA
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	750	NA
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	750	NA
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	750	NA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	750	NA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1))	-	750	NA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	750	NA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	750	NA
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	750	NA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	750	NA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	750	NANA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	750	NA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS)	-	750	NA
1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT)	-	750	NA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	750	NA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	750	NA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	750	NA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS)	-	750	NA
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT)	-	750	NA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	1500	NA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	1500	NA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	1500	NA
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	1500	NA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	1500	NA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	1500	NA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	1500	NA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	1500	NA
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	1500	NA

Complete

17 Jun, 2024

-
-

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

16500 View breakup
Rs.16500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli(or thermotolerant bacteria))	-	450	N.A.
6.1.2(Coliform , bacteria)	-	450	N.A.
6.1.3(Faecal Streptococci )	-	450	N.A.
6.1.3(Staphylococcus Aureus)	-	450	N.A.
6.1.4(Sulphite Reducing Anaerobes )	-	450	N.A.
6.1.5(Pseudomonas Aeruginosa )	-	500	N.A.
6.1.6(Yeast and Mould )	-	450	N.A.
6.1.7(Salmonella )	-	500	N.A.
6.1.7(Shigella)	-	500	N.A.
6.1.8(Vibrio cholera )	-	450	N.A.
6.1.8(Vibrio parahemolyticus)	-	450	N.A.
6.2 Table-1 i(Colour)	-	200	N.A.
6.2 Table-1 ii(Odour)	-	100	N.A.
6.2 Table-1 iii(Taste)	-	100	N.A.
6.2 Table-1 iv(Turbidity)	-	200	N.A.
6.2 Table-1 v(Total dissolved solids)	-	200	N.A.
6.2 Table-1 vi(pH)	-	100	N.A.
6.2 Table-2 i(Nitrate (as NO3))	-	200	N.A.
6.2 Table-2 ii(Nitrite (as NO2))	-	200	N.A.
6.2 Table-2 iii(Sulphide (as H2S))	-	200	N.A.
6.2 Table-2 iv(Manganese (as Mn))	-	200	N.A.
6.2 Table-2 v(Copper (as Cu))	-	200	N.A.
6.2 Table-2 vi(Zinc (as Zn))	-	200	N.A.
6.2 Table-2 vii(Flouride (as F))	-	200	N.A.
6.2 Table-2 viii(Barium (as Ba))	-	20	N.A.
6.2 Table-2 ix(Antimony (as Sb))	-	200	N.A.
6.2 Table-2 x(Borates (as B))	-	200	N.A.
6.2 Table-2 xi(Silver (as Ag))	-	200	N.A.
6.2 Table-2 xii(Chloride (as Cl))	-	200	N.A.
6.2 Table-2 xiii(Sulphate (as SO4),)	-	200	N.A.
6.2 Table-2 xiv(Magnesium (as Mg))	-	200	N.A.
6.2 Table-2 xv(Calcium (as Ca))	-	200	N.A.
6.2 Table-2 xvi(Sodium (as Na))	-	200	N.A.
6.2 Table-2 xvii(Alkalinity (as HCO3))	-	200	N.A.
6.2 Table-2 xviii(Selenium (as Se))	-	200	N.A.
6.2 Table-2 xix(Mineral Oil)	-	500	N.A.
6.2 Table-2 xx(Phenolic compounds (as C6H5OH))	-	300	N.A.
6.2 Table-2 xxi(Anionic surface active agents (as MBAS))	-	300	N.A.
6.2 Table-3 i(Arsenic (as As))	-	200	N.A.
6.2 Table-3 ii(Cadmium (as Cd))	-	200	N.A.
6.2 Table-3 iii(Cyanide (as CN))	-	200	N.A.
6.2 Table-3 iv(Chromium (as Cr))	-	200	N.A.
6.2 Table-3 v(Mercury (as Hg))	-	200	N.A.
6.2 Table-3 vi(Lead (as Pb)	-	200	N.A.
6.2 Table-3 vii(Nickel (as Ni))	-	200	N.A.
6.2 Table-3 viii(Polychlorinated biphenyle (PCB))	-	500	N.A.
6.2 Table-3 ix(Polynuclear aromatic hydrocarbons)	-	500	N.A.
6.3(o,p DDT)	-	100	N.A.
6.3(p,p DDT)	-	100	N.A.
6.3(o,p DDE)	-	100	N.A.
6.3(p, DDE)	-	100	N.A.
6.3(o,p DDD)	-	100	N.A.
6.3(p,p DDD)	-	100	N.A.
6.3(γ-HCH (Lindane))	-	100	N.A.
6.3(α-HCH)	-	100	N.A.
6.3(β-HCH)	-	100	N.A.
6.3(δ-HCH)	-	100	N.A.
6.3(α Endosulfan)	-	100	N.A.
6.3(β Endosulfan)	-	100	N.A.
6.3(Endosulfan Sulphate)	-	100	N.A.
6.3(Monocrotophos)	-	100	N.A.
6.3(Ethion)	-	100	N.A.
6.3(Chlorpyrifos)	-	100	N.A.
6.3(Phorate)	-	100	N.A.
6.3(Phorate sulphoxide)	-	100	N.A.
6.3(phorate sulphone)	-	100	N.A.
6.3(2,4-D)	-	100	N.A.
6.3(Butachlor)	-	100	N.A.
6.3(Isoproturon)	-	100	N.A.
6.3(Alachlor)	-	100	N.A.
6.3(Atrazine)	-	100	N.A.
6.3(Methyl Parathion)	-	100	N.A.
6.3(Methyl Paraoxon)	-	100	N.A.
6.3(Malathion)	-	100	N.A.
6.3(Malaoxon)	-	100	N.A.
6.3(Aldrin)	-	100	N.A.
6.3(Dieldrin)	-	500	N.A.

Complete

17 Jun, 2024

-
-

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

- View breakup
Rs.6250.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	250	For BIS samples: 1.5 times of BIS testing charges
4.1(Sulphur-Percentage by mass)	-	500	For BIS samples: 1.5 times of BIS testing charges
4.1(Phosphorus-Percentage by mass)	-	500	For BIS samples: 1.5 times of BIS testing charges
6.0(Workmanship)	-	300	For BIS samples: 1.5 times of BIS testing charges
8.0(Straightness)	-	600	For BIS samples: 1.5 times of BIS testing charges
11.2(Surface Protection)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.1.1(Yield Stress)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.1.2(Elongation)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.1.3(Tensile Strength)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.2(Flattening Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.3(Bend Test (Strip))	-	250	For BIS samples: 1.5 times of BIS testing charges
13.4(Bend Test (Whole Tube))	-	250	For BIS samples: 1.5 times of BIS testing charges
13.5(Drift Expansion Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
13.6(Crush Test)	-	1000	For BIS samples: 1.5 times of BIS testing charges
19.1.3(Height of Internal Fin)	-	200	For BIS samples: 1.5 times of BIS testing charges
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	300	For BIS samples: 1.5 times of BIS testing charges
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	300	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 8963 (2006)

Chlorpyrifos, technical - (First Revision) specification

2400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 Table 1(Water content)	-	400	For BIS samples: 1.5 times of BIS testing charges
3.2 Table 1(Acidity)	-	400	For BIS samples: 1.5 times of BIS testing charges
3.2 Table 1(Material insoluble in acetone)	-	0	For BIS samples: 1.5 times of BIS testing charges
3.2 Table 1(Chlorpyrifos content)	-	1000	For BIS samples: 1.5 times of BIS testing charges
3.1(Description )	-	200	For BIS samples: 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 15644 (2006)

Safety of electric toys

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	500	-
8.0(Power Input)	-	500	-
9.0(Heating and abnormal operation)	-	1000	-
10.0(Electrical strength at operating temperature)	-	1500	-
11.1(Moisture resistance)	-	2000	-
11.2(Resistant to humidity)	-	1500	-
12.0(Electric strength at room temperature)	-	1000	-
13.0(Mechanical strength)	-	500	-
14.1(Construction)	-	50	-
14.2(Construction)	-	50	-
14.3(Construction)	-	50	-
14.4(Construction)	-	50	-
14.5(Construction)	-	50	-
14.6(Construction)	-	50	-
14.7(Construction)	-	100	-
14.8(Construction)	-	100	-
14.9(Construction)	-	100	-
14.1(Construction)	-	250	-
14.11(Construction)	-	50	-
14.12(Construction)	-	50	-
14.13(Construction)	-	50	-
14.14(Construction)	-	50	-
15.1(Protection of cords and wires)	-	250	-
15.2(Protection of cords and wires)	-	250	-
16.0(Components)	-	500	-
17 Table-1(Screws and connections)	-	250	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	250	-
18.0(Clearance and creepage distance)	-	500	-
19.1(Ball pressure test IEC 60695-10-2)	-	500	-
19.2.1(Glow wire test IEC 60695-2-11)	-	750	-
19.2.2(Needle flame test)	-	1000	-
20.0(Radiation, toxicity and similar hazards)	-	500	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	625	-
9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	625	-
9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	625	-
9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	625	-

Complete

17 Jun, 2024

-
-

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

- View breakup
Rs.10000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
Except Cl.24 cycle test for components

IS 1656 (2007)

Milk - Cereal based complementary foods - Specification (Fourth Revision)

- View breakup
Rs.16350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 11536 (2007)

Processed - Cereal based complementary foods - Specification (Second Revision)

- View breakup
Rs.16250.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 14433 (2007)

Infant milk substitutes - Specification (First Revision)

21100 View breakup
Rs.21100.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Description)	-	250	N.A.
6.3(Flavour taste and odour)	-	250	N.A.
6.4(Scorched particles)	-	250	N.A.
6.5(Linoleate)	-	250	N.A.
6.5(Vitamin E (for type 2 only))	-	750	N.A.
6.9.1(Bacterial count)	-	500	N.A.
6.9.2(Coliform count)	-	500	N.A.
6.9.3(Escherichia coli)	-	500	N.A.
6.9.4(Staphylococcus Aureus)	-	500	N.A.
6.9.5(Salmonella and shigella)	-	500	N.A.
6.9.6(Yeast and mould count)	-	500	N.A.
6.1(Moisture)	-	250	N.A.
6.1(Milk protein)	-	250	N.A.
6.1(Milk fat)	-	125	N.A.
6.1(Total fat)	-	125	N.A.
6.1(Total ash)	-	400	N.A.
6.1(Acid insoluble ash)	-	400	N.A.
6.1(Insolubility index)	-	200	N.A.
6.1(Solubility)	-	200	N.A.
6.1(Vitamin A (as Retinol))	-	750	N.A.
6.1(Iron)	-	250	N.A.
6.1(Lead)	-	250	N.A.
6.1(Arsenic)	-	250	N.A.
6.1(Tin)	-	250	N.A.
6.1(Cadmium)	-	250	N.A.
6.1(Added Vitamin D (expressed as chole-calciferol))	-	750	N.A.
6.1(Thiamin)	-	750	N.A.
6.1(Niacin)	-	750	N.A.
6.1(Riboflavin)	-	750	N.A.
6.1(Vitamin B6)	-	750	N.A.
6.1(Vitamin B12)	-	750	N.A.
6.1(Folic acid)	-	500	N.A.
6.1(Pentothenic acid)	-	500	N.A.
6.1(Biotin )	-	500	N.A.
6.1(Vitamin C)	-	750	N.A.
6.1(Vitamin K)	-	750	N.A.
6.1(Calcium)	-	300	N.A.
6.1(Phosphorus)	-	300	N.A.
6.1(Iodine)	-	500	N.A.
6.1(Copper)	-	300	N.A.
6.1(Manganese)	-	300	N.A.
6.1(Zinc)	-	300	N.A.
6.1(Sodium)	-	200	N.A.
6.1(Potassium)	-	200	N.A.
6.1(Chloride)	-	200	N.A.
6.1(Magnesium)	-	200	N.A.
6.1(Choline)	-	200	N.A.
6.1(Selenium)	-	300	N.A.
6.1(Vitamin E ( as alpha tocopherol compounds))	-	750	N.A.

Complete

17 Jun, 2024

-
-

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

- View breakup
Rs.10000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
Except Cl.24 cycle test for components

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

- View breakup
Rs.45000/- for adapters

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
Exlcuding clause 24 & clause 19.11.4.2.

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	2500	-
15(MOISTURE RESISTANCE)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	-
18(ENDURANCE)	-	2000	-
19(ABNORMAL OPERATION)	-	2500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	2500	-
31(RESISTANCE TO RUSTING)	-	2500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2500	-

Complete

17 Jun, 2024

-
-

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	100	For BIS samples 1.5 times of BIS testing charges
4(Size of fitting)	-	100	For BIS samples 1.5 times of BIS testing charges
5.1 Table-1 Fig.1(Dimension of Socket length)	-	100	For BIS samples 1.5 times of BIS testing charges
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	100	For BIS samples 1.5 times of BIS testing charges
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	150	For BIS samples 1.5 times of BIS testing charges
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	150	For BIS samples 1.5 times of BIS testing charges
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	750	For BIS samples 1.5 times of BIS testing charges
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	1250	For BIS samples 1.5 times of BIS testing charges
8(Marking)	-	100	For BIS samples 1.5 times of BIS testing charges

Complete

17 Jun, 2024

-
-

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1, Table-1, Fig-1(Nominal size)	-	100	NA
3.2.1, Table-1, Fig-1(B)	-	100	NA
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	100	NA
3.2.1, Table-1, Fig-1(Plumbing)	-	100	NA
Clause 3.2.2, and Fig. 2(Nominal size)	-	100	NA
Clause 3.2.2, and Fig. 2.(B)	-	100	NA
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	100	NA
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	100	NA
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	500	NA
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	500	NA
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	500	NA
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	500	NA
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	500	NA
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	500	NA
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	1500	NA
3.1(General)	-	500	NA

Complete

17 Jun, 2024

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	160	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
6.2(DIMENSIONS)	-	160	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
6.3(DIMENSIONS)	-	180	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.1(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.2(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.3(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
7.5(WORKMANSHIP AND FINISH )	-	60	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.1(MOISTURE CONTENT)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.4(Tensile strength)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.5(Mycological test)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.5 , 9.1.3.1.1(Mycological test)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.5 , 9.1.3.1.2(Mycological test)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.6 (Table 3)(Static bending strength)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.7 (Table 4)(Wet bending strength)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
9.1.8(Retention of preservative)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
11.1(MARKING)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
11.2(MARKING)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
6.3(DIMENSIONS)	-	0	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	400	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	400	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	200	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.13,000/-

Complete

17 Jun, 2024

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

117000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	2000	-
1.6(Power interface .)	-	5000	-
1.7(Markings and instructions)	-	3000	-
2.1(Protection from electric shock and energy hazards)	-	5000	-
2.2(SELV circuits)	-	5000	-
2.3(TNV circuits)	-	3000	-
2.4(Limited current circuits)	-	6000	-
2.5(Limited power sources .)	-	6000	-
2.6(Provisions for earthing and bonding)	-	8000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	3000	-
2.8(Safety interlocks)	-	2000	-
2.8.2/2.8.5(Interlock switches)	-	2000	-
2.8.7(Switches and Relay)	-	1000	-
2.9(Electrical insulation)	-	8000	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	500	-
2.10.5.4(Opto-coupler)	-	100	-
2.10.5.6(Thin sheet materials)	-	100	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.5.12(Wires in wound components)	-	500	-
2.10.5.13(Winding wire)	-	100	-
2.10.5.14(Additional insulation in wound components)	-	200	-
2.10.6(PCB material)	-	300	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	2000	-
2.10.8.4(Abrasion resistance test)	-	2000	-
2.10.9(Thermal Cycling)	-	2000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	200	-
2.10.12(Enclosed and sealed parts)	-	200	-
3.1(General)	-	500	-
3.1.4(Internal wire)	-	500	-
3.2(Connection to a mains supply)	-	1000	-
3.2.4(Appliance inlet /connector)	-	500	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	3000	-
4.2(Mechanical strength)	-	1000	-
4.2.8(Cathode Ray Tubes)	-	1000	-
4.3(Design and construction)	-	2000	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	3000	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	1000	-
4.3.13.2(Ionizing radiation)	-	1000	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	-
4.3.13.5(LED, laser class)	-	1000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	2000	-
5.1(Touch current and protective conductor curren)	-	2000	-
5.2(Electric strength)	-	3000	-
5.3(Abnormal operating and fault conditions)	-	3000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
Annex B(Motor tests under abnormal conditions)	-	2000	-
Annex C(Transformers)	-	2000	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	-
Annex EE(Household and home/ office document/ media shredders)	-	1000	-

Complete

17 Jun, 2024

-
-

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

- View breakup
Rs.14750.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	1500	-
7.0(Construction)	-	3000	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	5000	-
10.0(Terminals)	-	3000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	3000	-
13.0(Endurance Tests and Thermal Tests)	-	8000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	3000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Photometric Test)	-	2000	-

Complete

17 Jun, 2024

-
-

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT)	-	1000	N.A.
3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-	250	N.A.
4/4.1.1(Elongation at break (Class A' Tubes))	-	1500	N.A.
4/4.1.1(Elongation at break (Class B' Tubes))	-	1500	N.A.
4/4.1.2( Strength of Splice (Class A' Tubes))	-	1500	N.A.
4/4.1.2( Strength of Splice (Class B' Tubes))	-	1500	N.A.
4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes))	-	2500	N.A.
4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes))	-	2500	N.A.
4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B))	-	3000	N.A.
5(AIR TIGHTNESS)	-	1500	N.A.

Complete

17 Jun, 2024

-
-

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

- View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.55000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
Restricted to cap type B22d, E27, & E14 only

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

- View breakup
Rs.60000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

17 Jun, 2024

-
Included w.e.f. 15-10-2020

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE, Azadhpur

A-62/3, G T KARNAL ROAD INDUSTRIAL AREA, OPPOSITE HANS CINEMA, AZADPUR, DELHI 110033, Delhi, North, Delhi, 110033

9810442016 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found