BIS - LIMS (Laboratory Information Management System)

Shri Krishna Test House

B-70/1, Gali no 8 , New modern Shahdara ,Near DDA Flats mansarover park shahdara, Delhi, Shahdara, Delhi, 110032

9891112786 [email protected]

Scope List

Reset

36 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4(Materials)	-	12000		NA

Complete

05 Oct, 2022

-
-

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	500	NA
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	1000	NA
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	1000	NA
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	1000	NA
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	1000	NA
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	1000	NA
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1000	NA
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	1000	NA
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1500	NA
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1000	NA
3.4-Table 1(vi)(Compression set)	-	1000	NA
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	1000	NA
Clause 4.3 Table 1(Zinc oxide)	-	500	NA
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	500	NA
Clause 3.4 Table 1(Heavy metal content)	-	1000	NA

Complete

05 Oct, 2022

-
-

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking)	-	500	NA
4(Type)	-	500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content)	-	1500	NA
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content)	-	1500	NA
6(Thickness of sheet/strip)	-	1000	NA
6(Depth of bowl)	-	1000	NA
6(Internal dimensions of the bowl)	-	1000	NA
6(Bowl locating limits)	-	1000	NA
6(Co-ordinating sizes)	-	1000	NA
7.1(Consruction and workmanship)	-	1000	NA
7.3(Drainers)	-	500	NA
7.4(Waste outlet)	-	500	NA
7.5(Tap holes)	-	200	NA
7.6(Overflows)	-	200	NA
8(Finish)	-	1100	NA

Complete

05 Oct, 2022

-
-

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

STAINLESS STEEL WIRE RODS

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Heat Treatment)	-	2500	NA
Cl 9(Tensile & Hardness)	-	4500	NA
Cl 10(Diameter & Out Of Round)	-	2000	NA
6(The wire rods shall be smooth on surface and free from harmful surface defects)	-	200	-
7, Table 1of IS:6527 (Designation X04Cr13)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Aluminium)	-	200	-
7, Table 1of IS:6527 (Designation X04Cr13)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr13)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Carbon)	-	400	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Silicon)	-	400	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Manganese)	-	400	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Nickel)	-	400	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Niobium)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Titanium)	-	300	-
Cl 8(Heat Treatment)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr17Ni12Mo2)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X07Cr18Ni9)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr18Ni10)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X02Cr18Ni11)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X30Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X20Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(%Elongation)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(Ultimate Tensile Strength)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X12Cr13)(0.2% Proof Stress)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Hardness)	-	500	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(%Elongation)	-	200	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(Ultimate Tensile Strength)	-	200	-
9, Table 3 & 4 of IS:6527 (Designation X04Cr13)(0.2% Proof Stress)	-	200	-
10 & 10.1, Dia over 20 mm (Out of round)	-	200	-
10 & 10.1, Dia- (5.5-9.5 mm)(Size, Tolerance)	-	200	-
10 & 10.1, Dia- (5.5-9.5 mm)(Out of round)	-	200	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Size, Tolerance)	-	200	-
10 & 10.1, Dia over 9.5 mm upto 16 mm (Out of round)	-	200	-
10 & 10.1, Dia over 16 mm upto 20 mm (Size, Tolerance)	-	200	-
10 & 10.1, Dia over 16 mm upto 20 mm (Out of round)	-	200	-
10 & 10.1, Dia over 20 mm (Size, Tolerance)	-	200	-
Cl 10(Diameter & Out Of Round)	-	200	-
7, Table 1of IS:6527 (Designation X12Cr13)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X12Cr13)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X20Cr13)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X30Cr13)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Niobium)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11)(Titanium)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Niobium)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr18Ni10)(Titanium)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X07Cr18Ni9)(Titanium)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Niobium)	-	300	-
7, Table 1of IS:6527 (Designation X04Cr17Ni12Mo2)(Titanium)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X02Cr17Ni12Mo2)(Niobium)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Carbon)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Silicon)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Manganese)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nickel)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Chromium)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Sulphur)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Phosphorous)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Nitrogen)	-	500	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Copper)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Molybdenum)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Niobium)	-	300	-
7, Table 1of IS:6527 (Designation X10Cr17Mn6Ni4)(Titanium)	-	300	-

Complete

05 Oct, 2022

-
-

IS 13395 (1995)

Performance of handles and handle assemblies attached to cookware - Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	2000	NA
5.2(Bending Strength)	-	2000	NA
5.3(Torque Strength)	-	2000	NA
5.4(Impact Strength)	-	2000	NA
5.5(Fatigue Resistance)	-	2000	NA
5.6(Leakage)	-	2000	NA
5.7(Thermal Insulation)	-	2000	NA
5.8(Heat Resistance)	-	2000	NA
5.9(Washing Resistance)	-	2000	NA
5.1(Burning Resistance)	-	2000	NA

Complete

05 Oct, 2022

-
-

IS 444 (2017)

Rubber hoses, textile - Reinforced, for general - Purpose water applications - Specification (Fifth Revision)

TYPE 1, 2 & 3, BORE DIAMETER 10 mm TO 100 mm

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Lining - IS 444)	-	500	NA
6.1- Table 1(Internal diameters - ISO 4671)	-	500	NA
6.2(Concentricity - ISO 4671)	-	500	NA
6.3(Length -IS 4671)	-	500	NA
6.4( thickness of the lining plus cover - ISO 4671)	-	500	NA
6.4(If the cover is fluted, the depth of the flutes - ISO 4671)	-	500	NA
7.1 - Table 2( tensile strength of Lining - ISO 37 )	-	1000	NA
7.1 - Table 2( tensile strength of Cover - ISO 37 )	-	1000	NA
7.1 - Table 2(elongation at break of Lining - ISO 37)	-	1000	NA
7.1 - Table 2(elongation at break of Cover - ISO 37)	-	1200	NA
7.1 - Table 2(Change in tensile strength of Lining from original value after ageing(max) - ISO 188 and ISO 37)	-	1200	NA
7.1 - Table 2(Change in tensile strength of Cover from original value after ageing(max) - ISO 188 and ISO 37)	-	1200	NA
7.1 - Table 2(Change in elongation at break of Lining from original value after ageing (max.) - ISO 188 and ISO 37)	-	1200	NA
7.1 - Table 2(Change in elongation at break of Cover from original value after ageing (max.) - ISO 188 and ISO 37)	-	1200	NA
7.2 - Table 3(Proof pressure at 23 °C - ISO 1402)	-	2000	NA
4(Classification - IS 444)	-	1000	NA

Complete

05 Oct, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

Shri Krishna Test House

B-70/1, Gali no 8 , New modern Shahdara ,Near DDA Flats mansarover park shahdara, Delhi, Shahdara, Delhi, 110032

9891112786 [email protected]

Scope List