BIS - LIMS (Laboratory Information Management System)

National Test House (WR), Mumbai

9323464313 [email protected]

Scope List

Reset

45 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Composition)	-	100	-
4.2.1(Lead Restriction)	-	400	-
Cl 4.3, Table 1, S.no. i)(Drying time, Hard dry)	-	300	-
Cl 4.3, Table 1, S.no. ii)(Consistency)	-	200	-
Cl 4.3, Table 1, S.no. iii)(Finish)	-	200	-
Cl 4.3, Table 1, S.no. iv)(Wet opacity)	-	300	-
Cl 4.3, Table 1, S.no. v)(Colour)	-	100	-
Cl 4.3, Table 1, S.no. vi)( Mass)	-	200	-
Cl 4.3, Table 1, S.no. vii)(Water content)	-	500	-
Cl 4.3, Table 1, S.no.viii)(Flexibility and adhesion)	-	200	-
Cl 4.3, Table 1, S.no. ix)(Stripping test )	-	300	-
Cl 4.3, Table 1, S.no. x)(Protection against corrosion under conditions of condensation)	-	500	-
Cl 4.3, Table 1, S.no.xi)(Volatile matter, perce)	-	200	-
Cl 4.3, Table 1, S.no.xii)(Resistance to acid)	-	300	-
Cl 4.3, Table 1, S.no.xiii)(Resistance to alkali)	-	300	-
Cl 4.3, Table 1, S.no.xiv)(Resistance to Heat)	-	300	-
Cl 4.3, Table 1, S.no.xv)(Flash point ,)	-	300	-
Cl 4.3, Table 1, S.no.xvi)(Keeping properties)	-	300	-

Complete

24 Jul, 2022

-
-

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

- View breakup
Rs.7,500/- (Civil : Rs. 7,000/- )

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

- View breakup
Rs.4500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

- View breakup
Rs.7500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
Size : 15 mm to 100 mm; Types : Light , medium weight; Broad and Square Type. Heavy Type I & II

IS 4860 (1968)

Specification for acid - Resistant bricks

- View breakup
Rs.9500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Remark
3(CONDUCTOR: MATERIALS)	-	-
4(INSULATION : MATERIALS)	-	-
5.1(FILLER AND INNER SHEATH)	-	-
5.2(FILLER AND INNER SHEATH)	-	-
6(ARMOURING)	-	-
7(OUTER SHEATH)	-	-
8.1(CONDUCTOR: CONSTRUCTION)	-	-
8.2(PROTECTIVE BARRIER)	-	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	-
9.1(Insulation Applied by extrusicn)	-	-
9.2(Thickness of Insulation - Average)	-	-
9.3(Thickness of Insulation - Minimum)	-	-
9.4(Application of Insulation)	-	-
10.1(Core Identification)	-	-
10.3(Core Identification by number )	-	-
10.2(Core Identification- Neutral)	-	-
10.4(Core Identification by number - Neutral )	-	-
11(LAVING UP OF CORES)	-	-
12.1 & 12.2(Inner sheath : Application)	-	-
12.3(Thickness of Inner Sheath)	-	-
13.1(Armouring: Application)	-	-
13.2(Type of armour )	-	-
13.3(Armouring : Dimensions -Wire Diameter)	-	-
13.3(Armouring : Dimensions -Formed wire )	-	-
13.4(Armour: Joint)	-	-
13.5(Armouring : Resistance Test)	-	-
13.6 a)(ARMOURING: Tensile Strength)	-	-
13.6 b)(ARMOURING: Elongation )	-	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	-
13.6 g)(ARMOURING: Resistivity)	-	-
14.1(Outer Sheath : Application)	-	-
14.2(Colour of outer sheath)	-	-
14.3(Thickness of outer sheath - AVERAGE)	-	-
14.3(Thickness of outer sheath - minimum)	-	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	-
15.1 a) iii)(Wrapping test (for aluminium))	-	-
15.1 a) iv)(Resistance test - Main conductor)	-	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	-
15.1 e) v) (Sheath : Hot deformation)	-	-
15.1 e) vi) (Sheath : Heat shock test)	-	-
15.1 e) vii) (Sheath : Thermalstability)	-	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	-
16.2(HIGH VOLTAGE TEST )	-	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	-
16.9(Oxygen Index Test)	-	-
16.1(Flame Retardance Test on Single Cables)	-	-
16.11(Flame Retardance Test on Bunched Cables)	-	-
16.14(Temperature Index)	-	-
16.13(Test for Halogen Acid Gas Evolution)	-	-
17.1(Manufacturer'. ldeadentificatioa)	-	-
17.2(cable Indentification )	-	-
17.3(cable Code )	-	-

Complete

24 Jul, 2022

-
-

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

- View breakup
Rs. 12,000/- (Mechanical : Rs. 7,000/- & Chemical : Rs. 5,000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
Rs. 9,000/- (Mechanical : Rs. 5,500/- & Chemical : Rs. 3,500/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 1328 (1996)

Veneered Decorative Plywood -Specification

- View breakup
Rs.5000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

9000 View breakup
Rs.9000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1000	NA
4.2.3(Carbon Dispersion Test)	-	1000	NA
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	NA
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	NA
6.1(Finish)	-	1000	NA
7.1.1(Resistance to Deformation)	-	2000	NA
7.2(Resistance to Impact)	-	1000	NA
7.3(Test for Top Load Resistance)	-	2000	NA
7.4(Tensile Strength)	-	3000	NA
7.5(Flexural Modulus)	-	2000	NA
7.6(overall Migration)	-	1000	NA

Complete

24 Jul, 2022

-
-

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Remark
6(Ratings)	-	-
6.1(Ratings)	-	-
6.2(Ratings)	-	-
7(Classification)	-	-
7.1(Classification)	-	-
7.1.1(Classification)	-	-
7.1.2(Classification)	-	-
7.1.3(Classification)	-	-
7.1.4(Classification)	-	-
7.1.5(Classification)	-	-
7.1.6(Classification)	-	-
7.1.7(Classification)	-	-
7.1.8(Classification)	-	-
7.2(Classification)	-	-
8(Marking)	-	-
8.1(Marking)	-	-
8.2(Marking)	-	-
8.3(Marking)	-	-
8.4(Marking)	-	-
8.5(Marking)	-	-
8.6(Marking)	-	-
8.7(Marking)	-	-
8.8(Marking)	-	-
8.9(Marking)	-	-
10(Protection against Electric Shock)	-	-
10.1(Protection against electric shock )	-	-
10.2(Protection against electric shock )	-	-
10.3(Protection against electric shock )	-	-
10.3.1(Protection against electric shock )	-	-
10.3.2(Protection against electric shock )	-	-
10.4(Protection against electric shock )	-	-
10.5(Protection against electric shock )	-	-
10.6(Protection against electric shock )	-	-
10.7(Protection against electric shock )	-	-
11.1(Provision for earthing)	-	-
11.2(Provision for earthing)	-	-
11.3(Provision for earthing)	-	-
11.4(Provision for earthing)	-	-
12(Terminals)	-	-
12.1(Terminals)	-	-
12.2(Terminals)	-	-
12.2.1(Terminals)	-	-
12.2.2(Connection of conductor)	-	-
12.2.3(Mechanical strength of terminals)	-	-
12.2.4(Resistance to corrosion)	-	-
12.2.5(Undue damage to conductor)	-	-
12.2.6(Terminals)	-	-
12.2.7(Insertion of conductor)	-	-
12.2.8(Terminals)	-	-
12.2.9(Locking against accidental loosening)	-	-
12.2.10(Terminals)	-	-
12.2.11(Distance between screw and conductor)	-	-
12.2.12(Terminals)	-	-
12.3(Terminals)	-	-
12.3.1(Terminals)	-	-
12.3.2(Screwless terminals)	-	-
12.3.3(Connectin of conductor)	-	-
12.3.4(Material of terminals)	-	-
12.3.5(Clamping)	-	-
12.3.6(Connection)	-	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	-
12.3.8(Screwless terminals design)	-	-
12.3.9(Screwless terminal fixing)	-	-
12.3.10(Terminals)	-	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	-
13(Constructional requirements )	-	-
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	-
13.2(b) Construction of switch [Cl 13.2])	-	-
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	-
13.4(d) Ordinary switches [Cl 13.4])	-	-
13.5(e) Rotary switches [Cl 13.5])	-	-
13.6(f) Screws and other means [Cl 13.6])	-	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	-
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	-
13.15(Constructional requirements )	-	-
13.15.1(Constructional requirements )	-	-
13.15.2(Constructional requirements )	-	-
14(Mechanism [Cl. 14])	-	-
14.1(Mechanism)	-	-
14.2(Mechanism)	-	-
14.3(Mechanism)	-	-
14.4(Mechanism)	-	-
14.5(Mechanism)	-	-
14.6(Mechanism)	-	-
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	-
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	-
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	-
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	-
16(Insulation resistance and electric strength )	-	-
16.1(Insulation resistance [Cl. 16.1])	-	-
16.2( Electric Strength [Cl. 16.2])	-	-
16.3(Flash test)	-	-
17(Temperature- rise [Cl. 17])	-	-
18(Marking and breaking Capacity[Cl. 18])	-	-
18.1(Making and breaking capacity )	-	-
18.2(Making and breaking capacity )	-	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	-
19.1(Normal operation)	-	-
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	-
20(Mechanical Strength Test [Cl. 20])	-	-
20.1(Mechanical Strength Test)	-	-
20.2(Mechanical Strength Test)	-	-
20.3(Mechanical Strength Test)	-	-
20.4(Mechanical strength )	-	-
20.4.1(Mechanical strength )	-	-
20.4.2(Mechanical strength )	-	-
20.5(Mechanical Strength Test)	-	-
20.6(Mechanical Strength Test)	-	-
20.7(Mechanical Strength Test)	-	-
20.8(Mechanical Strength Test)	-	-
20.9(Mechanical strength )	-	-
21.1(Resistance to heat )	-	-
21.2(Resistance to Heat)	-	-
21.3(Resistance to heat )	-	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	-
22.1(i) Screw & Nuts [Cl.22.1])	-	-
22.2(Measurement and manual test)	-	-
22.3(iii) Electrical Connections [Cl.22.3])	-	-
22.4(ii) Screw & rivets [Cl . 22.4])	-	-
22.5(iv) Current carrying part [Cl.22.5])	-	-
22.6(Inspection and chemical analysis)	-	-
22.7(Screws, current carrying parts and connections )	-	-
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	-
23.1(Creepage distances, clearances & distance through sealing compound )	-	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	-
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	-
25 of IS 3854 : 1997(Resistance to rusting)	-	-

Complete

24 Jul, 2022

-
-

IS 14587 (1998)

Prelaminated Medium Density Fibre Board -specification

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2, Table-1(Test for Density)	-	500	-
10.4, Table-1(Test for Water Absorption)	-	1000	-
10.5(test for swelling in water)	-	2000	-
10.6(test for modulis of rupture)	-	2500	-
10.7(Test for tensile strength perpendicular to Surface)	-	2000	-
10.8(Test for tensile strength perpendicular to Surface after ageing )	-	2000	-
10.9(test screw withdrawal strength)	-	1500	-
10.1(test for surface abrasion resistance)	-	5000	-
10.11(test for resistance to steam)	-	500	-
10.12(test for resistance to crack)	-	500	-
10.13(test for resistance to cigarette burn)	-	500	-
10.14(test for resistance to stain)	-	1500	-

Complete

24 Jul, 2022

-
-

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

- View breakup
Rs.5000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

National Test House (WR), Mumbai

9323464313 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found