BIS - LIMS (Laboratory Information Management System)

National Test House (WR), Mumbai

9323464313 [email protected]

Scope List

Reset

45 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

E250, 275, 300, 350, 410 A, BR, B0, C &E450,550,650A,BR

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	1000	-
Cl 15(Length, Width & Thickness)	-	1000	-
Cl 12(Sudden Load Applied)	-	1500	-
Cl 11.3(Press)	-	1500	-
Cl 10.3(UTM)	-	3000	-
Cl 7(Workmanship)	-	1000	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	3000	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	3000	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	3000	-
Cl. 15, 16(Width )	-	1000	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	1000	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	1000	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	1000	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	1000	-

Complete

24 Jul, 2022

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	3000	-
Cl 8.2(Press)	-	1000	-
Cl 13(Weight)	-	1000	-
Cl 12(Workmanship)	-	1000	-
Cl 14(Length, Width & Thickness)	-	1000	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	3000	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	3000	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	3000	-

Complete

24 Jul, 2022

-
-

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	200	-
7(CLASSIFICATION)	-	200	-
8(MARKING)	-	100	-
9(CHECKING OF DIMENSIONS)	-	300	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	-
11(PROVISION FOR EARTHING)	-	100	-
12(TERMINALS)	-	100	-
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	300	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	300	-
15(INTERLOCKED SOCKET-OUTLETS)	-	0	-
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1000	-
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
18(OPERATION OF EARTHING CONTACTS)	-	300	-
19(TEMPERATURE RISE)	-	1500	-
20(BREAKING CAPACITY)	-	1500	-
21(NORMAL OPERATION)	-	2500	-
22(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	400	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	300	-
24(MECHANICAL STRENGTH)	-	500	-
25(RESISTANCE TO HEAT)	-	500	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	300	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	200	-
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	500	-
29(RESISTANCE TO RUSTING)	-	200	-
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	500	-
11.5(PROVISIONS FOR EARTHING)	-	0	-
11.6(PROVISIONS FOR EARTHING)	-	0	-
12.1.1(TERMINALS)	-	0	-
12.1.2(TERMINALS)	-	0	-
12.2.1(TERMINALS)	-	0	-
12.2.3(TERMINALS)	-	0	-
12.2.4(TERMINALS)	-	0	-
12.2.5(TERMINALS)	-	0	-
12.2.6(TERMINALS)	-	0	-
12.2.7(TERMINALS)	-	0	-
12.2.8(TERMINALS)	-	0	-
12.2.9(TERMINALS)	-	0	-
12.2.10(TERMINALS)	-	0	-
12.2.11(TERMINALS)	-	0	-
12.3.1(TERMINALS)	-	0	-
12.3.2(TERMINALS)	-	0	-
12.3.3(TERMINALS)	-	0	-
12.3.4(TERMINALS)	-	0	-
12.3.5(TERMINALS)	-	0	-
12.3.6(TERMINALS)	-	0	-
12.3.7(TERMINALS)	-	0	-
12.3.8(TERMINALS)	-	0	-
12.3.9(TERMINALS)	-	0	-
12.3.10(TERMINALS)	-	0	-

Complete

24 Jul, 2022

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

22500 View breakup
-

Clause No.	Exclusion	Remark
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	-
13.3(Armouring : Dimensions -Wire Diameter)	-	-
13.3(Armouring : Dimensions -Formed wire )	-	-
13.5.1(ARMOURING : Resistance)	-	-
13.5.2(ARMOURING : Resistance)	-	-
13.6 a)(ARMOURING: Tensile Strength)	-	-
13.6 b)(ARMOURING: Elongation )	-	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	-
13.6 g)(ARMOURING: Resistivity)	-	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	-
15.1 e)(Insulation resistance test : IR Constant )	-	-
15.1 f)(High voltage test ( water immersion test ))	-	-
15.1 g)(High voltage test at room temperature)	-	-
16.4(Flammability Test)	-	-
9.2(INSULATION : Thickness of Insulation)	-	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	-
9.4(INSULATION : Application of Insulation)	-	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	-
15.1 d)4)(Hot deformation : Insulation )	-	-
15.1 d)4)(Hot deformation : Sheath )	-	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	-
15.1 d)6)(Heat shock test- Insulation )	-	-
15.1 d)6)(Heat shock test- sheath )	-	-
15.1 d)7)(Thermal stability- insulation )	-	-
15.1 d)7)(Thermal stability- Sheath )	-	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	-
16.5(Oxygen Index Test)	-	-
16.6(Flame Retardance Test on Single Cables)	-	-
16.7(Flame Retardance Test on Bunched Cables)	-	-
16.9(Test for Halogen Acid Gas Evolution)	-	-
16.1(Temperature Index)	-	-
16.4(Flammability Test- Un affected portion)	-	-
16.4(Flammability Test- Period of Burning)	-	-
3.1(MATERIALS : CONDUCTOR)	-	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	-
6.1(MATERIALS : ARMGURING)	-	-
6.2(MATERIALS : ARMGURING)	-	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	-
8.1(CONSTRUCTION : CONDUCTOR)	-	-
8.2(CONSTRUCTION : CONDUCTOR)	-	-
10.1(CORE IDENTIFICATION)	-	-
10.2(CORE IDENTIFICATION)	-	-
10.3(CORE IDENTIFICATION)	-	-
10.3.1(Arrangement of Marking)	-	-
11.1(LAYING UP OF CORES)	-	-
11.2(LAYING UP OF CORES)	-	-
12.1(INNER SHEATH)	-	-
12.2(INNER SHEATH)	-	-
13.1.1(ARMOURING : Application)	-	-
13.1.2(Armouring: Coverage )	-	-
13.1.3(ARMOURING : Direction of lay )	-	-
13.1.4(ARMOURING : Application)	-	-
13.2(ARMOURING : Type of Armour)	-	-
13.2.1(ARMOURING : Type of Armour)	-	-
13.4(ARMOURING : Joints)	-	-
14.1(OUTER SHEATH)	-	-
14.2(OUTER SHEATH)	-	-
14.3(OUTER SHEATH : Colour )	-	-
16.1(DETAILS OF TESTS : General)	-	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	-
17.2(IDENTIFICATION : Cable Identification)	-	-
17.2.1(IDENTIFICATION : Cable Identification)	-	-
17.3(IDENTIFICATION : Cable Code)	-	-
9.3(Minimum Thickness of Reduce core insulation)	-	-
9.2(Thickness of Reduce core insulation)	-	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	-

Complete

24 Jul, 2022

-
-

IS 303 (1989)

Plywood for General Purposes -

MR/BWR

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	2000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1500	-

Complete

24 Jul, 2022

-
-

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 15(Workmanship)	-	1000	-
Cl. 14.3(Flattening test (Over 50 mm NB))	-	1000	-
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	1000	-
Cl. 14.1.1(Elongation)	-	3000	-
Cl. 14.1(Tensile Strength)	-	3000	-
Cl. 3.3, 10.2(Plain End)	-	1000	-
Cl. 11(Length)	-	1000	-
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	1000	-
Cl. 6.5(Height of Internal Fin)	-	1000	-
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	1000	-
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	1000	-
Clause 14.1.1(Elongation Percent)	-	3000	-
Clause 11.3(Approximate Length)	-	1000	-
Clause 11.2(Exact Length)	-	1000	-
Clause 11.1(Random Length)	-	1000	-
Clause 8.1 (Table3,4,5)(Nominal Bore )	-	1000	-

Complete

24 Jul, 2022

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	2000	-
Cl 7.2(Weight)	-	1000	-
Cl 6.1(Length, Width & Thickness)	-	1000	-
Cl 9.4(Load In Other Direction From Bend)	-	1000	-
Cl 9.3(Load In One Direction)	-	1000	-
Clause 6.3(Effective Cross-sectional Area)	-	1000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	-
5.7(PullOut (Bond Test))	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
4.2(Niobium (Nb))	-	500	-
4.2(Boron (B))	-	500	-
4.1( Ti)	-	500	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	300	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	200	-

Complete

24 Jul, 2022

-
-

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

20000 View breakup
-

Clause No.	Exclusion	Remark
11.2(Legibility)	-	-
11.1(Durability)	-	-
11(Identification)	-	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	-
10.4(Flammability test- Unaffected portion)	-	-
10.4(Flammability test-Burning after flame removal)	-	-
10.1(HV (water immersion))	-	-
10.2(HV (room temperature))	-	-
table 1 e) 3) (IR constant- max. Temp)	-	-
table 1 e) 3) (IR constant- Room temp )	-	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	-
10.8(Smoke density rating)	-	-
10.6(Halogen evolution)	-	-
10.7(Temperature index)	-	-
10.5(Oxygen index)	-	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	-
Table 1(Category Code)	-	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	-
Table 1 iii) d) 4)(Cracks Observed)	-	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	-
Table 1 iii) c) 4)(Cracks Observed)	-	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	-

Complete

24 Jul, 2022

-
-

IS 133 : Part 1 (2013)

Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

- View breakup
Under Coating : Rs. 10,000/-, Finishing : Rs. 10,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 viii(Alkali content)	-	500	-
6.1 Table-2 vii(Chloride content)	-	500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	-
7 Table-3 i.(Fineness)	-	-	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	-	-
7 Table-3 ii b(Expansion by Autoclave)	-	-	-
7 Table-3 iii a(Setting Time Initial)	-	-	-
7 Table-3 iii b(Setting Time Final)	-	-	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	-	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	-	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	-	-

Complete

24 Jul, 2022

-
-

IS 455 (2015)

Portland slag cement - Specification

- View breakup
Rs.10,000/- (Civil : Rs. 6,000/- & Chemical : Rs. 4,000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-

Complete

24 Jul, 2022

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Genral Purpose CR0, 1,2,3,4,5 and all new designations

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Chemical Composition)	-	2500	Mechanical Rs.7500/- for CR 1 and CR2, Rs.9500/- for others & Chemical Rs.2500/-
7.0(ALUMINIUM)	-	500	-
7.0(MICRO ALLOYS)	-	500	-
7.0(NITROGEN)	-	500	-
7.0(SILICON)	-	500	-
7.0(MANGANESE)	-	500	-
7.0(PHOSPHORUS)	-	500	-
7.0(SULPHUR)	-	500	-
7.0(CARBON)	-	500	-
8(Mechanical and Physical Properties)	-	7500	-

Complete

24 Jul, 2022

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.1(Average Compressive Strength)	-	4000		-

Complete

24 Jul, 2022

-
-

IS 14846 (2000)

Sluice valve for water works purposes (50 To 1200 mm size) - specification

- View breakup
Rs. 7500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
For Grade PN 1.0 and PN 1.6; Size (Dia.) Designation : 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 750, 800, 900, 1000, 1100 and 1200 mm

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Fe330, Fe410, Fe450 Size 168.3mm to 2540mm Dia

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Tensile test-Yield Strength)	-	3000	-
9.1(Tensile test-Strength)	-	3000	-
9.1(Tensile test- Elongation)	-	3000	-
14.1(Visual inspection, Appearance and Workmanship)	-	1000	-
14.2(Visual inspection, Appearance and Workmanship)	-	1000	-
14.3(Visual inspection, Appearance and Workmanship)	-	1000	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	1000	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD))	-	1000	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	1000	-
9.3(Guided bend test(For SAW Pipes))	-	1000	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	1000	-
11.1, Table 5.(Thickness)	-	1000	-
11.1, Table 5.(Mass)	-	1000	-
12.3.3(Ovality)	-	1000	-
12.5(Strightness)	-	1000	-
9.2.1(Flattening test for ERW pipes )	-	1000	-
9.2.3(Flattening Test for seamless pipes)	-	1000	-

Complete

24 Jul, 2022

-
-

IS 14933 (2001)

High Pressure Fire Fighting Hose -Specification

14000 View breakup
Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.4(Internal Dia)	-	1000	NA
Cl 4(Length)	-	1000	NA
Cl 5(Mass)	-	1000	NA
Cl 6(Coil Dia)	-	1000	NA
Cl 10(Hydaulic Proof Pressure Test)	-	1000	NA
Cl 11(Hydraulic Burst Pressure Test)	-	1000	NA
Cl 12(Kink test)	-	1000	NA
Cl 13 & Annex A(Adhesion Test)	-	1000	NA
Cl 14 & Annex B(Abrasion Resistance Test)	-	1000	NA
Cl 15(Accelerated Ageing Test)	-	2000	NA
Cl 16(Change in Length)	-	1000	NA
Cl 17.2(Oil Resistance Test)	-	1000	NA
Cl 17.3(Heat Resistance Test)	-	1000	NA

Complete

24 Jul, 2022

-
-

IS 2645 (2003)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(The permeability of water in specimen Prepared with WPC shall be less than half the permeability of plain cement specimens. (i.e ; < 50 percent))	-	0	-
Clause 3.2(Initial setting time of cement)	-	500	-
Clause 3.2(Final setting time of cement)	-	500	-
Cl 3.3(Compressive Strength, At 3days & 7 days)	-	4000	-
Clause 3.1 (Permeability to water of cement mortar)	-	3000	-
Clause 3.4(Chloride content)	-	1000	-

Complete

24 Jul, 2022

-
-

IS 12406 (2003)

Medium density fibre boards for general purpose - Specification (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11.5(Test For Moisture Content)	-	1000	-
Cl 11.4(Test For Density)	-	500	-
Cl 11.6(Test For water Absorption)	-	1000	-
Cl 11.7.1(Due To General Absorption)	-	1000	-
Cl 11.7.2(Due To Surfacel Absorption)	-	2000	-
Cl 11.8(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2500	-
Cl 11.9(Test For Internal Bond)	-	2000	-
Cl 11.10(Test For Screw Withdrawal Strength)	-	1500	-

Complete

24 Jul, 2022

-
-

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Diameter of Core Wire)	-	500	-
7.1.2(Length of Electrodes)	-	500	-
7.2.1(Contact End)	-	500	-
7.2.2(Arc striking End)	-	500	-
7.3(Concentricity of Flux covering with core wire)	-	500	-
7.4(Defects of Core wire and Coverings)	-	500	-
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	8000	Tensile test with weld preparation to check quality
9.1.2 Table 6 ( Yield Stress -Annex F)	-	8000	Tensile test with weld preparation to check quality
9.1.3 Table 6 ( Impact Strength-Annex F)	-	5000	Room Temperature Rs. 3000 /- and 5000 for sub zero temp.
9.2(Butt Weld Bend Test-IS 1599)	-	1000	-
9.3(Running PerformanceTest-Annex H)	-	5000	-
9.4(Increased Metal Recovery Test-IS 13043)	-	3000	-
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	5000	-
9.6(Radiographic Test- IS 1182)	-	6000	Radiography with weld plate preparation to check quality of welding electrode.
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	2500	-
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	2500	-
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	2500	-
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	2500	-
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	2500	-
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	2500	-
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Cr+Ni+Mo - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-

Complete

24 Jul, 2022

-
-

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

1 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1-Table 1( DIMENSIONS OF TUBULARS-Pieces )	-	1		-

Complete

24 Jul, 2022

-
-

IS 1258 (2005)

Bayonet lamp holders (Fourth Revision)

- View breakup
Rs.6000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1.1(MOISTURE CONTENT)	-	1000	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1000	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	2000	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	0	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2000	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	2500	-
9.1.6 (Table 3)(Static bending strength)	-	3000	-
9.1.5(Mycological test)	-	2500	-
6.1(DIMENSIONS)	-	1000	-
7.1(WORKMANSHIP AND FINISH )	-	1000	-
9.1.4(Tensile strength)	-	2500	-
9.1.7 (Table 4)(Wet bending strength)	-	3000	-

Complete

24 Jul, 2022

-
-

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(DIMENSIONS & TOLERANCES )	-	2000	-
10.1.1(MOISTURE CONTENT)	-	10002	-
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	2000	-
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	2000	-
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	2500	-
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	3000	-
10.1.5(MYCOLOGICAL TEST )	-	2500	-
8.1(WORKMANSHIP AND FINISH )	-	500	-
10.1.6(TENSILE STRENGTH)	-	2500	-
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	3000	-

Complete

24 Jul, 2022

-
-

IS 299 (2012)

Alumino - Ferric - Specification (Fifth Revision)

- View breakup
Rs.4875/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
For Grade I, II and III only

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

- View breakup
Rs.6750/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3(Freedom from Coarse Particles)	-	400	-
6.4(Skin Formation)	-	400	-
6.5(Thinning Properties)	-	400	-
6.6(Application Properties)	-	400	-
6.8(Lead Restriction)	-	400	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	400	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	400	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	400	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	400	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	400	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	400	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	400	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	400	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	400	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	400	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	400	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	400	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	400	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	400	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	400	-
6.9 Table 2 (6) Colour , (Finishing))	-	400	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	400	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	400	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	400	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	400	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	400	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	400	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	400	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	400	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	400	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	400	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	400	-
6.7.1.3(QUV apparatus)	-	400	-

Complete

24 Jul, 2022

-
-

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

- View breakup
Rs. 13,500/- (Mechanical : Rs. 9,500/- & Chemical : Rs. 4,000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

24 Jul, 2022

-
-

IS 13801 (2013)

Chequered Cement Concrete Tiles -

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	500	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.1(Concavity & Convexity )	-	500	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.5(Wet transverse strength)	-	2000	-
Cl 12.6(Resistance to wear)	-	2500	-

Complete

24 Jul, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

National Test House (WR), Mumbai

9323464313 [email protected]

Scope List

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found