BIS - LIMS (Laboratory Information Management System)

Hi Physix Laboratory India Private Limited

B-32/1/2, MIDC, Industrial Area, Ranjangaon, Pune, Pune, Pune, Maharashtra, 412220

8552003805 [email protected]

Scope List

Reset

92 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13021 : Part 1 (1991)

AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 1 general and safety requirements

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7.3(Test for Marking)	-	2000	-
8.1(TERMINALS)	-	3000	-
9.0(PROVISIONS FOR EARTHING)	-	2000	-
10, Table 1(Between live parts of different polarity)	-	2000	-
10, Table 1(Between live parts and acceptable metal parts which are permanently fixed to the ballast including screws or devices for fixing covers or fixing the ballast to its supports clearance)	-	0	Charges already included in clause 10.
10, Table 1(Between live parts and a Bat supporting surface or a loose metal cover, if any, if the construction does not ensure that the values under 2 above are maintained under the most unfavourable circumstances )	-	0	Charges already included in clause 10.
11.1(Ballasts, which do not rely upon the luminaire enclosure for protection against electric shock)	-	3000	-
11.2(Ballasts incorporating capacitors)	-	0	Charges already included in clause 11.1
12.0(PROTECTION AGAINST ELECTRIC SHOCK)	-	3000	-
13.0(MOISTURE RESISTANCE AND INSULATION)	-	4000	-
14.1(ELECTRIC STRENGTH)	-	2000	-
14.1.1, Table 2(Up to and including 42 V)	-	0	Charges already included in clause 14.1
14.1.1, Table 2(Above 42 V up to and including 1000 V)	-	0	Charges already included in clause 14.1
15.0(ABNORMAL CONDITIONS)	-	5000	-
16.1(Short-circuit across creepage distances and clearance in air)	-	5000	-
16.2(Short-Circuit Across or, if Applicable, Interruption of Semi-conductor Devices)	-	0	Charges already included in clause 16.1
16.3(Shert-Circuit Across Insulation Consisting of Covering of Lacquer, Enamel or Textile)	-	0	Charges already included in clause 16.1
16.4(Short-circuit across electrolytic capacitors.)	-	0	Charges already included in clause 16.1
17.0(Current carrying parts and connections)	-	2000	-
17.5, Table 3(Nominal Diameter Screw)	-	0	Charges already included in clause 17.0
17.5, Table 3(Torque ( Nm ), 1)	-	0	Charges already included in clause 17.0
17.5, Table 3(Torque ( Nm ), 2)	-	0	Charges already included in clause 17.0
18.3(External parts of insulating material providing protection against electric shock)	-	4000	-
18.4(Parts of insulating material retaining live parts in position )	-	0	Charges already included in clause 18.3
19.0(RESISTANCE TO CORROSION)	-	2000	-

Complete

20 Jun, 2022

-
-

IS 302 : Part 2 : Sec 24 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 24 refrigerators, food - Freezers and ice - Makers

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 , 7.12, 7.14,7.15(Marking)	-	5000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	5000	-
9(Starting of motor operated Appliances)	-	5000	Testing charges are for clause no.9
9.1(Startability Test)	-	0	Testing charges are included for clause no.9
9.2(Startability Test)	-	0	Testing charges are included for clause no.9
11(TEMPERATURE RISE)	-	15000	-
12,12.1,12.2 & 12.3(Heating)	-	10000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	10000	-
14( RADIO AND TELEVISION INTERFERENCE SUPPRESSION )	-	5000	-
15(Moisture resistance)	-	20000	-
16 & 16.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	10000	Testing charges are for clause no.16
16.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Testing charges are included for clause no.9
16.3 & table(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Testing charges are included for clause no.9
16.4(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( After the Humidity Treatment ))	-	0	Testing charges are included for clause no.9
17(Over load Protection )	-	10000	-
19(ABNORMAL OPERATION)	-	30000	-
20.1(Stability and mechanical hazards)	-	10000	Testing charges are for clause no.20.1
20.2(Stability and mechanical hazards)	-	0	Testing charges are included for clause no.20.1
21.1(MECHANICAL STRENGTH)	-	10000	Testing charges are for clause no.21.1
21.2(MECHANICAL STRENGTH)	-	0	Testing charges are included for clause no.21.1
22.1(Constructions)	-	15000	Testing charges are for clause no.22.1
22.2(Constructions)	-	0	Testing charges are included for clause no.22.1
22.3(Constructions)	-	0	Testing charges are included for clause no.22.1
22.4(Constructions)	-	0	Testing charges are included for clause no.22.1
22.5(Constructions)	-	0	Testing charges are included for clause no.22.1
22.6(Constructions)	-	0	Testing charges are included for clause no.22.1
22.7 to 22.10(Constructions)	-	0	Testing charges are included for clause no.22.1
22.11(Constructions)	-	0	Testing charges are included for clause no.22.1
22.12(Constructions)	-	0	Testing charges are included for clause no.22.1
22.13 to 22.33(Constructions)	-	0	Testing charges are included for clause no.22.1
22.101 to 22.103(Constructions)	-	0	Testing charges are included for clause no.22.1
23.1 & 23.2(Internal wiring)	-	5000	Testing charges are for clause no.23.1 & 23.2
23.3(Internal wiring)	-	0	Testing charges are included for clause no.23.1 & 23.2
23.4(Internal wiring)	-	0	Testing charges are included for clause no.23.1 & 23.2
23.5 to 23.8(Internal wiring)	-	0	Testing charges are included for clause no.23.1 & 23.2
24.1(Components)	-	10000	-
25.1(Supply connection and external flexible cords)	-	5000	Testing charges are for clause no.25.1
25.2(Supply connection and external flexible cords)	-	0	Testing charges are included for clause no.25.1
25.3(Supply connection and external flexible cords)	-	0	Testing charges are included for clause no.25.1
25.4(Supply connection and external flexible cords)	-	0	Testing charges are included for clause no.25.1
25.6(Supply connection and external flexible cords)	-	0	Testing charges are included for clause no.25.1
25.7 to 25.13(Supply connection and external flexible cords)	-	0	Testing charges are included for clause no.25.1
26.1 to 26.8(Terminals for external conductors)	-	5000	Testing charges are for clause no.26.1 to 26.8
26.9(Terminals for external conductors)	-	0	Testing charges are included for clause no.26.1 to 26.8
26.10 & 26.13(Terminals for external conductors)	-	0	Testing charges are included for clause no.26.1 to 26.8
27.1 to 27.4(Provision for earthing)	-	5000	Testing charges are for clause no. 27.1 to 27.4
27.5(Provision for earthing)	-	0	Testing charges are included for clause no. 27.1 to 27.4
28.1, Table No.-14(Screws and connections)	-	5000	Testing charges are for clause no. 28.2 to 28.4
28.2 to 28.4(Screws and connections)	-	0	Testing charges are included for clause no. 28.2 to 28.4
29.1 and table 2(creepage and Clearances distances )	-	5000	Testing charges are for clause no. 29.1
29.2 & 29.3(Clearances, creepage distances )	-	0	Testing charges are included for clause no. 29.1
30.1(Resistance to heat and fire)	-	10000	Testing charges are for clause no. 30.1
30.2(Resistance to heat and fire)	-	0	Testing charges are included for clause no. 30.1
30.3(Resistance to heat and fire)	-	0	Testing charges are included for clause no. 30.1
31(Resistance to rusting)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3000	-
7(Heating under normal operating conditions)	-	10000	-
8(Constructional requirements with regard to the protection against electric shock)	-	8000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	35000	Charges for Cl. No.10 will be variable as per the size of the products. Minimum charges are Rs.10000
11(Fault conditions)	-	10000	-
12(Mechanical strength)	-	10000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	15000	-
14(Components)	-	10000	-
15(TERMINALS)	-	3000	-
16(External flexible cords)	-	5000	-
17(Electrical connections and mechanical fixings)	-	3000	-
19(Stability and mechanical hazards)	-	10000	-
20(Resistance to fire)	-	8000	-

Complete

20 Jun, 2022

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	5000	-
1.6(Power interface .)	-	5000	-
1.7(Markings and instructions)	-	3000	-
2.1(Protection from electric shock and energy hazards)	-	5000	-
2.2(SELV circuits)	-	5000	-
2.3(TNV circuits)	-	5000	-
2.4(Limited current circuits)	-	3000	-
2.5(Limited power sources .)	-	5000	-
2.6(Provisions for earthing and bonding)	-	5000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	3000	-
2.8(Safety interlocks)	-	0	-
2.9(Electrical insulation)	-	35000	Testing charges for Cl. 2.9 will be variable as per size of products .Minimum charges will be 10000.
2.10(Clearances, creepage distances and distances through insulation)	-	10000	-
3.1(General)	-	2000	-
3.2(Connection to a mains supply)	-	3000	-
3.3(Wiring terminals for connection of external conductors)	-	5000	-
3.4(Disconnection from the mains supply)	-	3000	-
3.5(Interconnection of equipment)	-	3000	-
4.1(Stability)	-	5000	-
4.2(Mechanical strength)	-	5000	-
4.3(Design and construction)	-	8000	-
4.4(Protection against hazardous moving parts)	-	5000	-
4.5(Thermal requirements)	-	5000	-
4.6(Openings in enclosures)	-	4000	-
4.7(Resistance to fire)	-	5000	-
5.1(Touch current and protective conductor curren)	-	3000	-
5.2(Electric strength)	-	3000	-
5.3(Abnormal operating and fault conditions)	-	5000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	3000	-
7.1(General)	-	2000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	5000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	5000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	3000	-

Complete

20 Jun, 2022

-
-

IS 13585 : Part 1 (2012)

Shunt power capacitors of the non - Self - Healing type for ac systems having a rated voltage up to and including 1 000 v: Part 1 general - Performance, testing and rating - Safety requirements - Guide for installation and operation (First Revision)

01-10 kVR,11-30kVR,31-50kVR

251050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Capacitance measurement and output calculation : Measuring procedure )	-	24000	Testing Charges are for Cl. no. 7 Testing Charges for 01-10kVR are Rs.13000. Testing Charges for 11-30kVR are Rs.19000.
7.2( Capacitance tolerances)	-	0	Testing Charges are included in Cl. no. 7.1.
8.1(Measurement of the tangent of the loss angle (tan S) of the capacitor)	-	11000	Testing Charges are for Cl. no. 8 Testing Charges for 01-10kVR are Rs.8000. Testing Charges for 11-30kVR are Rs.9500.
8.2(Measurement of the tangent of the loss angle (tan S) of the capacitor : Loss requirements)	-	0	Testing Charges are included in Cl. no. 8.1.
9.1(Voltage test between terminals (routine test))	-	3000	Testing Charges are for Cl. no. 9 Testing Charges for 01-10kVR are Rs.5000. Testing Charges for 11-30kVR are Rs.4000.
9.2(Voltage test between terminals (type test))	-	0	Testing Charges are included in Cl. no. 9.1.
10.1(Voltage test between terminals and containe (Routine test))	-	3000	Testing Charges are for Cl. no. 10 Testing Charges for 01-10kVR are Rs.5000. Testing Charges for 11-30kVR are Rs.4000.
10.2(Voltage test between terminals and container (type test))	-	0	Testing Charges are included in Cl. no. 10.1.
11(Test of internal discharge device)	-	11000	Testing Charges are for Cl. no. 11 & 22 Testing Charges for 01-10kVR are Rs.8000. Testing Charges for 11-30kVR are Rs.9500.
12(Sealing test)	-	11000	Testing Charges for 01-10kVR are Rs.8000. Testing Charges for 11-30kVR are Rs.9500.
13(Thermal stability test)	-	24000	Testing Charges for 01-10kVR are Rs.13000. Testing Charges for 11-30kVR are Rs.19000.
14(Measurement of the tangent of the loss angle (tan 8) of the capacitor at elevated temperature)	-	24000	Testing Charges for 01-10kVR are Rs.13000. Testing Charges for 11-30kVR are Rs.19000.
15(Lightning impulse voltage test between terminals and container ()	-	3000	Testing Charges for 01-10kVR are Rs.5000. Testing Charges for 11-30kVR are Rs.4000.
16(Discharge test)	-	12000	Testing Charges for 01-10kVR are Rs.6000. Testing Charges for 11-30kVR are Rs.9500.
17(Ageing test)	-	47550	Testing Charges for 01-10kVR are Rs.51150. Testing Charges for 11-30kVR are Rs.48000.
19(Destruction test)	-	31000	Testing Charges for 01-10kVR are Rs.26000. Testing Charges for 11-30kVR are Rs.28350.
26.1(Marking : Rating plate)	-	1500	Testing Charges are for Cl.no. 26 & 27 Testing Charges for 01-10kVR are Rs.2500. Testing Charges for 11-30kVR are Rs.2000.
26.3(Warning plate)	-	0	Testing Charges are included in Cl. no. 26.1
27.1( Instruction sheet or rating plate)	-	0	Testing Charges are included in Cl. no. 26.1
6.2 j)(Disconnecting test on internal fuses)	-	20000	Testing Charges for 01-10kVR are Rs.20000 Testing Charges for 11-30kVR are Rs.20000.

Complete

20 Jun, 2022

-
-

IS 418 (2004)

Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)

49500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking, IS 418)	-	2000	2000 up to 25W, 2000 for above 25W to 40W, 2000 for above 40W to 60W, 2000 for above 60W to 100W, 2000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges.
7.1(Lamp Dimensions, IS 418:2004)	-	2000	2000 up to 25W, 2000 for above 25W to 40W, 2000 for above 40W to 60W, 2000 for above 60W to 100W, 2000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges.
7.2(Lamp Dimensions, IS 418:2004)	-	0	2000 up to 25W, 2000 for above 25W to 40W, 2000 for above 40W to 60W, 2000 for above 60W to 100W, 2000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges. Charges already included in clause 7.1.
8.1(Wattage, IS 418)	-	8000	8000 up to 25W, 10000 for above 25W to 40W, 12000 for above 40W to 60W, 15000 for above 60W to 100W, 20000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges.
8.2.1(Luminous Flux Initial, IS 418)	-	0	8000 up to 25W, 10000 for above 25W to 40W, 12000 for above 40W to 60W, 15000 for above 60W to 100W, 20000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges. Charges already included in clause 8.1.
9(Lumen Maintenance, IS 418)	-	12500	12500 up to 25W, 15000 for above 25W to 40W, 17500 for above 40W to 60W, 30000 for above 60W to 100W, 50000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges.
10.1(Life Test Requirements, IS 418)	-	25000	25000 up to 25W, 30000 for above 25W to 40W, 35000 for above 40W to 60W, 60000 for above 60W to 100W, 100000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges.
10.2(Life Test Requirements, IS 418)	-	0	25000 up to 25W, 30000 for above 25W to 40W, 35000 for above 40W to 60W, 60000 for above 60W to 100W, 100000 for above 100W to 200W. Charges varies for rated voltage at 110% voltage charges. Charges already included in clause number 10.1.
6(Marking, IS 418)	-	0	-

Complete

20 Jun, 2022

-
-

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

68000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Terminals)	-	5000	-
9(PROVISION FOR EARTHING)	-	2000	-
10(Protection against accidental contact with live parts)	-	2000	-
11(Mositure Resistance and Insulation)	-	10000	-
12(Electric Strength)	-	2000	-
13(Fault conditions)	-	10000	-
15(Construction)	-	5000	-
16(Creepage distance and clearances)	-	3000	-
17(Screws, current carrying parts and connections)	-	2000	-
18(Resistance to heat, fire and tracking)	-	5000	-
19(Resistance to corrosion)	-	2000	-

Complete

20 Jun, 2022

-
-

IS 2418 : Part 2 (2018)

Tubular fluorescent lamps for general lighting service: Part 2 performance requirements (Second Revision)

105000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5 of IS 2418:2:2018(MECHANCIAL, PHYSICAL AND STARTING REQUIREMENTS)	-	5000	-
Cl 5.1.2 of IS 2418:2:2018(Caps)	-	0	Charges already included in clause number 5.
Cl 5.1.3 of IS 2418:2:2018(Dimensions)	-	0	Charges already included in clause number 5.
Cl 5.2 of IS 2418:2:2018( Starting Requirements)	-	5000	-
Cl 6 of IS 2418:2:2018(MARKING)	-	2000	-
Cl 7.3 of IS 2418:2:2018(Visual Examination and Checking for Marking)	-	0	-
Cl 7.4 of IS 2418:2:2018(Burning Test)	-	3000	-
Cl 7.5 of IS 2418:2:2018(Starting Characteristics)	-	0	Charges already included in clause number 5.2.
Cl 7.6 of IS 2418:2:2018(Test for Electrical Luminous and Colour Characteristics)	-	30000	-
Cl 7.7 of IS 2418:2:2018(Chromaticity Co-ordinates )	-	0	Charges already included in clause number 7.6.
Cl 7.8 of IS 2418:2:2018(Life and Lumen Maintenance)	-	60000	-

Complete

20 Jun, 2022

-
-

IS 9974 : Part 1 (1981)

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MARKING : Mark of origin)	-	2000	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W.
5.1(MARKING : Rated wattage; )	-	0	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W. Charges already included in clause number 5.1 (Marking: Mark and Origin).
5.1(MARKING : Country of manufacture; )	-	0	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W. Charges already included in clause number 5.1 (Marking: Mark and Origin).
5.1(MARKING : Lamp designation )	-	0	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W. Charges already included in clause number 5.1 (Marking: Mark and Origin).
5.1(MARKING : Rated voltage or voltage range. )	-	0	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W. Charges already included in clause number 5.1 (Marking: Mark and Origin).
7.2.1(Lamp Starting Test : Lamp with External Starter)	-	3000	3000 for 70W, 3000 for above 70W to 150W, 3000 for above 150W to 250W, 3000 for above 250W to 400W.
7.2.2(Lamp Starting Test : Lamp with Internal Starter)	-	0	3000 for 70W, 3000 for above 70W to 150W, 3000 for above 150W to 250W, 3000 for above 250W to 400W. Charges already included in clause number 7.2.1
7.3.1(Lamp Worm-Up Test)	-	2000	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W.
7.3.2(Lamp Worm-Up Test)	-	0	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W. Charges already included in clause number 7.3.1
7.4.1(Lamp Electrical Characteristics : Ageing)	-	15000	15000 for 70W, 15000 for above 70W to 150W, 15000 for above 150W to 250W, 15000 for above 250W to 400W.
4.1(Lamp Dimensions )	-	1000	1000 for 70W, 1000 for above 70W to 150W, 1000 for above 150W to 250W, 1000 for above 250W to 400W.
4.2(Glass Bulb)	-	0	-
4.3.1(Caps)	-	1000	1000 for 70W, 1000 for above 70W to 150W, 1000 for above 150W to 250W, 1000 for above 250W to 400W.
4.3.3(Caps)	-	2000	2000 for 70W, 2000 for above 70W to 150W, 2000 for above 150W to 250W, 2000 for above 250W to 400W.
4.3.4(Caps : Insulation Resistance)	-	1000	1000 for 70W, 1000 for above 70W to 150W, 1000 for above 150W to 250W, 1000 for above 250W to 400W.
10.1(5 000 hours operation, )	-	30000	30000 for 70W, 40000 for above 70W to 150W, 60000 for above 150W to 250W, 90000 for above 250W to 400W.
10.2(Life Test)	-	0	30000 for 70W, 40000 for above 70W to 150W, 60000 for above 150W to 250W, 90000 for above 250W to 400W. Charges already included in clause number 10.1
10.2.1(Switching ‘on’ and switching ‘off’ during life test)	-	0	30000 for 70W, 40000 for above 70W to 150W, 60000 for above 150W to 250W, 90000 for above 250W to 400W. Charges already included in clause number 10.1

Complete

20 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 8 (2013)

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

185000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	50000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	5000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	35000	-
14.0(Resistance to Dust & Moisture)	-	12000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Functional Safety)	-	40000	-
18.0(Changeover Operation)	-	10000	-
19.0(High Temperature Operation)	-	5000	-
20.0(BATTERY CHARGERS FOR SELFCONTAINED EMERGENCY LUMINAIRES)	-	5000	-
21.0(TEST DEVICES FOR EMERGENCY OPERATION)	-	2000	-
22.0(REST MODE AND INIHIBITION MODE FACILITIES)	-	2000	-

Complete

20 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	0	-
20.5(Classification of Luminaires')	-	0	-
20.6(Marking)	-	2000	-
20.7(Construction)	-	20000	-
20.8(Creepage Distance and Clearances)	-	2000	-
20.9(Provision for earthing)	-	0	-
20.10(Terminals)	-	1000	-
20.11(External & Internal Wiring)	-	5000	-
20.12(Protection against electric shock)	-	8000	-
20.13(Endurance Tests and Thermal Tests)	-	25000	-
20.14(Resistance to Dust & Moisture)	-	12000	-
20.15(Insulation Resistance and Electric Strength)	-	5000	-
20.16(Resistance to Heat , fire and tracking)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

121000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	20000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	5000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	25000	-
14.0(Resistance to Dust & Moisture)	-	12000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Photometric Test)	-	40000	-

Complete

20 Jun, 2022

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

121000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	20000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	5000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	25000	-
14.0(Resistance to Dust & Moisture)	-	12000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Photometric Test)	-	40000	-

Complete

20 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

121000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6(Marking)	-	2000	-
7(Construction)	-	20000	-
8(Creepage Distance and Clearances)	-	2000	-
9(Provision for earthing)	-	2000	-
10(Terminals)	-	1000	-
11(External & Internal Wiring)	-	5000	-
12(Protection against electric shock)	-	2000	-
13(Endurance Tests and Thermal Tests)	-	25000	-
14(Resistance to Dust and Moisture)	-	12000	-
15(Insulation Resistance and Electric Strength)	-	5000	-
16(Resistance to Heat , fire and tracking)	-	5000	-
17(Photometric Test)	-	40000	-

Complete

20 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

121000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	20000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	5000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	25000	-
14.0(Resistance to Dust & Moisture)	-	12000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Photometric Test)	-	40000	-

Complete

20 Jun, 2022

-
-

IS 15111 : Part 2 (2002)

Self ballasted lamps for general lighting services: Part 2 performance requirements

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	3000	-
8.1(STARTING AND RUN-UP)	-	3000	-
8.2(STARTING AND RUN-UP)	-	0	Testing charges already included in clause number 8.1
9(Lamp Wattage)	-	3000	-
10(Luminous Flux)	-	3000	-
11(Colour)	-	3000	-
12(LUMEN MAINTENANCE)	-	3000	-
13.1(Life)	-	30000	-
13.2(Life)	-	0	Testing charges already included in clause number 13.1
14(Harmonics)	-	5000	-
15(Lamp Efficacy)	-	3000	-
16(Power factor)	-	2000	-
18.1(Marking)	-	2000	-
18.2(BIS Cirtification Marking)	-	0	Testing charges already included in clause number 18.1

Complete

20 Jun, 2022

-
-

IS 15111 : PART 1 AND PART 2 (2002)

Self ballasted lamps for general lighting services: Part 1 safety requirements

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	2000	-
6.2(Marking)	-	0	Testing charges already included in clause number 6.1
6.3(Marking)	-	0	Testing charges already included in clause number 6.1
6.4(BIS Certification Marking)	-	0	Testing charges already included in clause number 6.1
7(Interchangeability )	-	2000	-
8(Protection against electric shock)	-	5000	-
9.2(Insulation Resistance)	-	15000	-
9.2(The insulation resistance of B 22 caps between shell and contact shall be not less than 5 MΩ When measure with a 500 voltage DC.)	-	0	Testing charges already included in clause number 9.2
9.3(Electric Strength)	-	0	Testing charges already included in clause number 9.2
10(Mechanical strength test )	-	10000	-
11(Cap Temperature rise test )	-	5000	-
12(Resistance to heat)	-	5000	-
13(Resistance to Flame and Ignition)	-	5000	-
14(Fault Conditions)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	5000	-
10(PROVISION FOR EARTHING)	-	4000	-
11(MOISTURE RESISTANCE)	-	5000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	5000	-
15(Transformer heating)	-	10000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	3000	-
18(Screws, current carrying parts and connections)	-	3000	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	2000	-

Complete

20 Jun, 2022

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	12000	-
7(Protection against accidental contact with live parts)	-	5000	-
8(Insulation Resistance and Electric Strength)	-	15000	-
9(MECHANICAL STRENGTH)	-	1000	-
10(cap temperature)	-	5000	-
11(Resistance to Heat)	-	5000	-
12(Resistance to Flame and Ignition)	-	5000	-
13(Fault conditions)	-	10000	-
14(Creepage distance and clearances)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
7.1(Marking- IS 302-1)	-	1000	-
7.2(Marking)	-	0	Testing charges already included in 7.1
7.4(Marking)	-	0	Testing charges already included in 7.1
7.5(Marking)	-	0	Testing charges already included in 7.1
7.6(Marking)	-	0	Testing charges already included in 7.1
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
9(Starting, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges already included in 13
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	0	Testing charges already included in 15
15.2(Moisture Resistance-Spillage test)	-	0	Testing charges already included in 15
15(Moisture Resistance, IS 302-1)	-	3000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges already included in 16
Cl.18(Verification)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	4000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21(Mechanical Strength, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	2000	-
22.2(Construction)	-	0	Testing charges already included in 22.1
22.3(Construction)	-	0	Testing charges already included in 22.1
22.4(Construction)	-	0	Testing charges already included in 22.1
22.5(Construction)	-	0	Testing charges already included in 22.1
22.6(Construction)	-	0	Testing charges already included in 22.1
22.8(Construction)	-	0	Testing charges already included in 22.1
22.9(Construction)	-	0	Testing charges already included in 22.1
23(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	2000	-
28(Screws & Connections, IS 302-1)	-	1000	-
35(Temperature withstand test for bowl)	-	3000	-
36(Test for controls )	-	1000	-
37(Strength of Assembly )	-	2000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	1000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	2000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.3(Whisking egg whites )	-	0	Testing charges already included in 34.2
34.4(IDLI batter-Grinding of black gram)	-	0	Testing charges already included in 34.2
34.4(IDLI batter-Grinding of rice)	-	0	Testing charges already included in 34.2
34.5.1 (a)(Operational test for juicers )	-	0	Testing charges already included in 34.2
34.5.1 (b)(Operational test for juicers )	-	0	Testing charges already included in 34.2
34.5.2(Operational test for juicers )	-	0	Testing charges already included in 34.2

Complete

20 Jun, 2022

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	15000	-
4.7(Marking & instructions)	-	3000	-
5.1(Protection against shock and energy hazards)	-	5000	-
5.2(Requirement of auxiliary circuits)	-	10000	-
5.3(Protective earthing and bonding)	-	5000	-
5.4(AC and DC power isolation)	-	3000	-
5.5(Over current and earth fault condition)	-	5000	-
5.6(Safety interlocks)	-	5000	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	-
6.1(Wiring, connections and supply)	-	3000	-
6.2(Connection to power)	-	5000	-
6.3(Wiring terminals for external power conductors)	-	5000	-
7.1(Enclosure)	-	5000	-
7.2(STABILITY)	-	5000	-
7.3(MECHANICAL STRENGTH)	-	5000	-
7.4(Construction details)	-	5000	-
7.5(Resistance to fire)	-	5000	-
7.6(Battery location)	-	8000	-
7.7(Temperature rise)	-	5000	-
8.1(General procision for earth leakage)	-	5000	-
8.2(Electric Strength)	-	3000	-
8.3(Abnormal operating and fault conditions)	-	5000	-
9.0(Connection to telecommunication networks)	-	10000	-
4.5(Components)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	2000	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	4000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(TRANSIENT OVERVOLTAGES)	-	1000	-
15(MOISTURE RESISTANCE)	-	4000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
19(ABNORMAL OPERATION)	-	3000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	3000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	4000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	-

Complete

20 Jun, 2022

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

170000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	2000	-
10(POWER INPUT AND CURRENT)	-	8000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	-
14(IMPULSE VOLTAGE TEST)	-	2000	-
15(HUMIDITY TREATMENT TEST)	-	3000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	40000	-
19(ABNORMAL OPERATION)	-	10000	Excluding the testing charges of EMI/EMC (Cl. no. 19.11.4.1 to 19.11.4.7 of IS 302-1:2008
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	5000	-
22(CONSTRUCTION)	-	10000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	20000	Additional testing charges will be applicable for other components testing ,if required . Excluding for testing charges of components
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	4000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	3000	-
11(HEATING)	-	10000	-

Complete

20 Jun, 2022

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Adapters for household & similar electrical appliances

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	2000	Testing charges are for Cl. no.8.
8.1.2(Protection against live parts in openings)	-	0	Testing charges are included in Cl. no.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges are included in Cl. no.8.1.1
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges are included in Cl. no.8.1.1
10.1(Power input)	-	5000	Testing charges are for Cl. no.10.
10.2(Current input)	-	0	Testing charges are included in Cl. no.10.1
11.1(General)	-	6000	Testing charges are for Cl. no.11.
11.2(General)	-	0	Testing charges are included in Cl. no.11.1
11.3(Heating)	-	0	Testing charges are included in Cl. no.11.3
13.1(General)	-	3000	Testing charges are for Cl. no.13.
13.2(Leakage current at operating temperature)	-	0	Testing charges are included in Cl. no.13.1
13.3(Electric Strength at operating temperature)	-	0	Testing charges are included in Cl. no.13.1
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	3000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges are included in Cl. no.15
15.2(Spillage Test)	-	0	Testing charges are included in Cl. no.15
15.3(Humidity Test)	-	0	Testing charges are included in Cl. no.15
16.0(General)	-	3000	-
16.1(General)	-	0	Testing charges are included in Cl. no.16
16.2(Leakage Current (after Clause 15))	-	0	Testing charges are included in Cl. no.16
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges are included in Cl. no.16
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
19(Abnormal Operation)	-	10000	Excluding the testing charges of EMI/EMC (Cl. no. 19.11.4.1 to 19.11.4.7 of IS 302-1:2008.
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	5000	-
22(Construction verification related test)	-	5000	-
23(General)	-	1000	-
24(Components)	-	10000	Additional testing charges will be applicable for other components testing ,if required. Excluding the testing charges of components.
25(Supply connection and external flexible cords)	-	3000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	4000	Testing charges are for Cl. 30.
30.2(Glow Wire Test)	-	0	Testing charges are included in Cl. no.30.1
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-

Complete

20 Jun, 2022

-
-

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

Routine Test , Type Test : Class A, B, C, D

455750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.5(Tangent of loss angle)	-	18000	-
2.6(Visual Examination)	-	4000	-
2.7(Voltage test between terminals)	-	9000	-
2.8(Voltage test between terminals and case)	-	9000	-
2.9(Capacitance measurement)	-	13500	-
2.1(Check of dimensions)	-	4000	-
2.11.1(Robustness of terminations)	-	18000	-
2.11.1.1(Tensile)	-	4000	-
2.11.1.2(Bending (half cf the terminations))	-	4000	-
2.11 .1.3(Torsion (other half of the terminations))	-	4000	-
2.11.1.4(Torque (screw terminals))	-	4000	-
2.11.1.5(Visual Examination)	-	2000	-
2.11.2(Soldering)	-	5000	-
2.11.3(Vibration)	-	20000	-
2.11.4(fixing bolt or stud (if fitted))	-	1500	-
2.12(Sealing Test)	-	9000	-
2.13(Endurance test)	-	177000	-
2.13.1(Endurance test :Testing in air with forced circulation)	-	0	Testing charges are included in Cl. no. 2.13
2.13.3(Endurance test : Conditions of compliance)	-	0	Testing charges are included in Cl. no. 2.13
2.14(Damping heat test)	-	66000	-
2.15(Self-healing test (if applicable))	-	9000	-
2.16.3(Destruction test : Test procedure)	-	44250	-
2.16.3.1(Destruction test : Test procedure - Preparation and pre-conditioning )	-	0	Testing charges are included in Cl. no. 2.16.3
2.16.3.2(Destruction test : Test procedure : DC conditioning)	-	0	Testing charges are included in Cl. no. 2.16.3
2.16.3.3(Destruction test : Test procedure : AC destruction test)	-	0	Testing charges are included in Cl. no. 2.16.3
2.16.4(Destruction tes: Evaluation of the failure )	-	0	Testing charges are included in Cl. no. 2.16.3
5.1(Check marking)	-	4000	-

Complete

20 Jun, 2022

-
-

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

43000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	1000	Testing Charges are for Cl. 7
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	Testing Charges are for Cl. 7
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	Testing Charges are for Cl. 7
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	Testing Charges are for Cl. 7
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	2000	Testing Charges are for Cl. 8
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	Testing Charges are for Cl. 8
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	Testing Charges are for Cl. 8
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	Testing Charges are for Cl. 8
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	Testing Charges are for Cl. 8
9.1(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	3000	Testing Charges are for Cl. 9
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	Testing Charges are for Cl. 9
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	Testing Charges are for Cl. 9
9.3.1(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	Testing Charges are for Cl. 9
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	2000	Testing Charges are for Cl. 9.4
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	1000	Testing Charges are for Cl.9.6
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	Testing Charges are for Cl.9.6
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	1000	Testing Charges are for Cl.9.7
10(Mechanical Properties )	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	2000	Testing Charges are for Cl.10.2
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	Testing Charges are for Cl.10.2
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	Testing Charges are for Cl.10.2
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	Testing Charges are for Cl.10.2
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	Testing Charges are for Cl.10.2
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	Testing Charges are for Cl.10.2
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	Testing Charges are for Cl.10.2
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	Testing Charges are for Cl.10.2
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	Testing Charges are for Cl.10.2
10.3(Impact Test [ Cl.10.3 ])	-	10000	-
10.3.4(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	Testing Charges are for Cl.10.2
10.4(Linear Deflection Test [ Cl.10.4 ])	-	0	-
10.5(External load Test [ Cl.10.5 ])	-	5000	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	5000	Testing Charges are for Cl.11
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	0	Testing Charges are for Cl.11
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	5000	Testing Charges are for Cl.12
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	Testing Charges are for Cl.12
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	Testing Charges are for Cl.12
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	Testing Charges are for Cl.12
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	Testing Charges are for Cl.12
9.3.2, table 3(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	Testing Charges are for Cl.9
7.101(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	Testing Charges are for Cl.7
7.102(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	Testing Charges are for Cl.7
9.1.101(Construction)	-	0	Testing Charges are for Cl.9

Complete

20 Jun, 2022

-
-

IS 1709 (1984)

Specification for capacitors or electric fan motors (First Revision)

Self Healing , Non Self Healing

359800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3.1(Insualtion Resistance between terminal and container)	-	6000	Testing charges are for Cl. No. 7.3
Cl. 5.1(Capacitor)	-	6000	Testing charges are for Cl. No. 5
Cl. 5.2(Capacitor)	-	0	Testing charges are for Cl. No. 5
Cl. 5.3(Capacitor)	-	0	Testing charges are for Cl. No. 5
Cl. 5.4(Capacitor)	-	0	Testing charges are for Cl. No. 5
Cl 5.5(Capacitor)	-	0	Testing charges are for Cl. No. 5
Cl. 5.6(Capacitor)	-	0	Testing charges are for Cl. No. 5
Cl. 5.7(Capacitor)	-	0	Testing charges are for Cl. No. 5
Cl. 6.2(Product may also be marked with standard mark.)	-	6000	Testing charges are for Cl. No. 6
Cl. 7.3.2(Insulation Resistance between terminals)	-	0	Testing charges are for Cl. No. 7.3
Cl. 7.4.1(Capacitors shall be subjected to an ac voltage test as specified in Table 2.)	-	13000	Testing charges are for Cl. No. 7.4
Cl. 7.4.2(Capacitors shall be subjected for 10sec to a test between terminals and metal foil wrapped tightly around the surface of the container with s sinusoidal test voltages. Test Voltage:2000Vrms for 10sec During the test, no dielectric breakdown or flashover shall occur. )	-	0	Testing charges are for Cl. No. 7.4
Cl. 7.5(Capacitance measured at rated frequency and rated voltage.)	-	13000	-
Cl.7.6(Tangent of Loss Angle measured at rated frequency and rated voltage. The maximum value of the tangent of loss angle for Self-healing MPP Type.)	-	19000	-
Cl. 7.7(A weight of 2kg shall be suspended freely from each one of them in turn for a period of 10 sec. There shall be no damage to the capacitor or termination after this loading.)	-	6000	-
Cl 7.8(Each termination shall withstand two consecutive bends as specified without damage to the capacitors)	-	6000	-
Cl 7.9(Soldering tags shall withstand two consecutive cycles of bending as specified without damage to the capacitors.)	-	6000	-
Cl. 7.10(There shall be no damage to the capacitors when the torque is applied to the nuts and screws of threaded terminations:)	-	6000	-
Cl. 7.11(The capacitor shall be not suffer any damage when the specified soldering iron is applied to the termination of 15 sec.)	-	6000	-
Cl. 7.12(Unenergized capacitor units kept in a position most likely to reveal leakage and heated throughout so that all parts of the container reach the temperature 5ºC higher the maximum operating temperature value. Total heating and cooling cycle time shall be 8 hours. After the sealing test No leakage shall occure.)	-	13000	-
Cl. 7.13(Capacitance)	-	19000	-
Cl. 7.13(Change in capacitance at 70°C as compare to 27°C. (Limit: 5%Max.) )	-	0	Testing charges are for Cl. No. 7.13
Cl. 7.13(Change in capacitance at 0°C as compare to 27°C. (Limit: 3%Max.) )	-	0	Testing charges are for Cl. No. 7.13
a(ISS 1709 : 1984)	-	6000	Testing charges are for Cl. No. 6
b(Manufacturers name or trade-mark and Serial number)	-	0	Testing charges are for Cl. No. 6
c(Rated Voltage)	-	0	Testing charges are for Cl. No. 6
d(Rated frequency)	-	0	Testing charges are for Cl. No. 6
e(Rated Capacitance)	-	0	Testing charges are for Cl. No. 6
f(Rated anbient Temperature)	-	0	Testing charges are for Cl. No. 6
Cl. 7.2(The capcitors shall be visually examined for finish and marking)	-	0	0
Cl. 7.14.1(Before test capacitance shall be measured. Th capacitor shall be subjected for 10 seconds to an ac voltage of 1.5 ti9mes the rated voltage. If rewer than five breakdown occure during the time, The voltage shall be increased slowly until five breakdown occured until voltage occured 3.5 times the rated voltage. voltage reduced to 0.8 times, no breakdown is permitted after decreased of voltage.)	-	13000	Testing charges are for Cl. No. 7.14 Not applicable for Non Self Healing Capacitors
Cl. 7.14.2(If only one or no breakdown has occurred since begning of the test when voltage has reached 3.5 times the rated voltage, the test shall be repeated on aonther identical capacitor.)	-	0	Testing charges are for Cl. No. 7.14
Cl.7.14.3(Before and after the test,the cpacitance shall be measured, A chage not greater than 0.3 %in its value shall be allowec.)	-	0	Testing charges are for Cl. No. 7.14
Cl. 7.15(After the test Capcitance variation)	-	63000	-
Cl. 7.16(The capacitors are mounted in a air circulated test chamber as specified and capacitors are energized at test voltage 1.25UN for 500hr Continuously at 50Hz. During the test no permanent breskdown,intertuption or flashover shall occure.)	-	95000	-
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and then capacitance shall be measured.)	-	0	Testing charges are for Cl. No. 7.16
Cl. 7.16(Change in capacitance, (Limit: 5%Max.) )	-	0	Testing charges are for Cl. No. 7.16
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and the tangent of loss angle shall be then measured. )	-	0	Testing charges are for Cl. No. 7.16
Cl. 7.16(Change in Tangent of Loss angle, (Limit: ----) )	-	0	Testing charges are for Cl. No. 7.16
Cl. 7.17(The capacitor sample was mounted in a circulating air oven maintained at a temperature 10ºC above the maximum operating temperature as specified without energizing. Capacitor energized at 1.4 times rated voltage by applying test voltage between terminal for 1 h, then 1.6 times rated voltage for 1 h, then 1.8 times rated voltage for 1 h, then 2.0 times rated voltage for 1 h then switch off. Then 2.0 times the rated voltage for an 8 h period each in four cycles of 24h. After completion of the test, the capacito is consider to have passe destruction test if a) Current through it has not been interruped by the delayed action test circuit fuse or by any internal fuse. b) The currnt through it has been interrputed without any harmful effect occurring. c)Three delayed action test ciucuit fuse have cleared without any hamfu effect occurring.d) The endurance is entact at the end of test e) The test voltage between terminals and container is passed at the end of the test.)	-	63800	Not applicable for Non Self Healing Capacitors.

Complete

20 Jun, 2022

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

89000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification of Luminaires')	-	0	-
4(General Test Requireements)	-	0	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	20000	-
8.0(Creepage Distance and Clearances)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	15000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	25000	-
14.0(Resistance to Dust & Moisture)	-	12000	-
15.0(Insulation Resistance and Electric Strength)	-	5000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking, IS 9537-2)	-	1000	Testing charges are for Cl. no. 6.
6.1(Marking, IS 9537-2)	-	0	Testing charges are for Cl. no. 6.
6.1(Marking, IS 9537-2)	-	0	Testing charges are for Cl. no. 6.
6.2(Marking, IS 9537-2)	-	0	Testing charges are for Cl. no. 6.
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	0	Testing charges are for Cl. no. 6.
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	3000	Testing charges are for Cl. no. 7.
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	0	Testing charges are for Cl. no. 7.
7.3(Dimensions (Wall thickness), IS 9537-2)	-	0	Testing charges are for Cl. no. 7.
7.4(Screw threads, IS 9537-2)	-	0	Testing charges are for Cl. no. 7.
8.1(Construction, Cl. 8 of IS 9537-1)	-	2000	Testing charges are for Cl. no. 8.
8.2(Construction, IS 9537-2)	-	0	Testing charges are for Cl. no. 8.
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	10000	-
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	8000	-
13(External Influences, IS 9537-2)	-	5000	-
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	0	Testing charges are for Cl. no. 7.

Complete

20 Jun, 2022

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

46000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	0	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	Charges are for Cl.7
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	Charges included in Cl.7.1
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	Charges included in Cl.7.1
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	Charges included in Cl.7.1
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	Charges included in Cl.7.1
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	Charges included in Cl.7.1
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	Charges included in Cl.7.1
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	Charges included in Cl.7.1
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	Charges included in Cl.7.1
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	Charges included in Cl.7.1
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	Charges included in Cl.7.1
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	Charges included in Cl.7.1
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	Charges included in Cl.7.1
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	Charges included in Cl.7.1
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	Charges included in Cl.7.1
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	Charges included in Cl.7.1
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	0	Charges included in Cl.7.1
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	2000	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	2000	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	3000	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	0	Charges included in Cl.11
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	0	Charges included in Cl.11
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	3000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	0	Charges included in Cl.13
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	2000	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	4000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	3000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	3000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	Charges included in Cl.19
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	Charges included in Cl.19
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	Charges included in Cl.19
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	0	Charges included in Cl.19
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	2000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	2000	Charges are for Cl. 21
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	Charges included in Cl.21.1
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	2000	Charges included in Cl.22
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	Charges included in Cl.22.2
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	0	Charges included in Cl.22.1
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	Charges included in Cl.22.1
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	Charges included in Cl.22.1
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	Charges included in Cl.22.1
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	Charges included in Cl.22.1
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	Charges included in Cl.22.1
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	Charges included in Cl.22.1
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	Charges included in Cl.22.1
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	Charges included in Cl.22.1
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	Charges included in Cl.22.1
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	Charges included in Cl.22.1
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	Charges included in Cl.22.1
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	Charges included in Cl.22.1
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	Charges included in Cl.22.1
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	Charges included in Cl.22.1
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	Charges included in Cl.22.1
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	Charges included in Cl.22.1
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	Charges included in Cl.22.1
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	Charges included in Cl.22.1
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	Charges included in Cl.22.1
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	Charges included in Cl.22.1
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	0	Charges included in Cl.22.1
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	1000	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	0	Charges included in Cl.23
Cl.24 of IS 302-2-35:2017(Component )	-	1000	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	2000	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	Charges included in Cl.25
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	Charges included in Cl.25
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	Charges included in Cl.25
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	Charges included in Cl.25
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	Charges included in Cl.25
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	Charges included in Cl.25
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	Charges included in Cl.25
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	2000	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	0	Charges included in Cl.27
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	Charges are for cl. 29
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	Charges included in Cl.29
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	3000	Charges are for Cl.30
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	Charges included in Cl.30
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	1000	-

Complete

20 Jun, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

Hi Physix Laboratory India Private Limited

B-32/1/2, MIDC, Industrial Area, Ranjangaon, Pune, Pune, Pune, Maharashtra, 412220

8552003805 [email protected]

Scope List