BIS - LIMS (Laboratory Information Management System)

Hi Physix Laboratory India Private Limited

B-32/1/2, MIDC, Industrial Area, Ranjangaon, Pune, Pune, Pune, Maharashtra, 412220

8552003805 [email protected]

Scope List

Reset

92 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 13340 (1993)

Power capacitors of self-Healing type for AC power systems having rated voltage up to 650 V - Specification

01-10kVR,11-30kVR,31-50kVR

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

20 Jun, 2022

-
-

IS 16103 : Part 2 (2012)

Led modules for general lighting: Part 2 performance requirements

296000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	3000	-
7(Module Power)	-	6000	-
8(Light Output)	-	77000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	18000	-
10(LED Module Life)	-	150000	-
13(Test for Emission (Radiated and Conducted) of radio frequency distribution)	-	40000	-

Complete

20 Jun, 2022

-
-

IS 16107 : Part 1 (2012)

Luminaires performance: Part 1 general requirements

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2(Photometric and Electrical Data)	-	75000		-

Complete

20 Jun, 2022

-
-

IS 16107 : Part 2 : Sec 1 (2012)

Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire

263000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Total Input Power)	-	6000	-
8(Light Output)	-	77000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	18000	-
10(LED Luminaire Life)	-	160000	-

Complete

20 Jun, 2022

-
-

IS 16077 (2013)

Thin - Film terrestrial photovoltaic (PV) modules - Design qualification and type approval

1130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	0	-
10.1(Visual inspection)	-	5000	-
10.2(Maximum power determination)	-	10000	-
10.3(Insulation test)	-	5000	-
10.4(Measurement of temperature coefficients)	-	20000	-
10.5(Measurement of NOCT)	-	20000	-
10.6(Performance at STC and NOCT)	-	20000	-
10.7(Performance at low irradiance)	-	10000	-
10.8(Outdoor exposure test)	-	30000	-
10.9(Hot-spot endurance test)	-	200000	-
10.10(UV preconditioning)	-	100000	-
10.11(Thermal cycling test)	-	150000	-
10.12(Humidity freeze test)	-	100000	-
10.13(Damp heat test)	-	150000	-
10.14(Robustness of termination test)	-	5000	-
10.15(Wet leakage current test)	-	5000	-
10.16(Mechanical load test)	-	20000	-
10.17(Hail test)	-	10000	-
10.18(Bypass diode thermal' test)	-	70000	-
10.19(Light Soaking)	-	200000	-

Complete

20 Jun, 2022

-
-

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

1330000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	0	-
5.1(Mechanical Endurance)	-	10000	For VRLA:10000 up to 250AH, 10000 for >250AH to 500AH, 10000 for >500AH to 5000AH, 10000 For >5000AH to 10000AH. Testing charges varies according to types of batteries (i.e. For Lead Acid Cell/Battery (Vented/ Monoblock) & For Ni-MH/ Ni-CD Cell/Battery)
5.2(Charge efficiency)	-	0	Testing charges already included in clause number 5.1
5.3(Deep discharge protection)	-	0	Testing charges already included in clause number 5.1
5.4(Marking)	-	0	Testing charges already included in clause number 5.1
5.5(Dafety)	-	0	Testing charges already included in clause number 5.1
5.6(Documentation)	-	0	Testing charges already included in clause number 5.1
6(Finctional Characteristics)	-	0	-
7(General test conditions)	-	0	-
8.1(Capacity test)	-	40000	For VRLA: 40000 up to 250AH, 50000 for >250AH to 500AH, 60000 for >500AH to 5000AH, 80000 For >5000AH to 10000AH. Testing charges varies according to types of batteries (i.e. For Lead Acid Cell/Battery (Vented/ Monoblock) & For Ni-MH/ Ni-CD Cell/Battery)
8.2(Endurance test)	-	540000	For VRLA: 540000 up to 250AH, 675000 for >250AH to 500AH, 810000 for >500AH to 5000AH, 1080000 For >5000AH to 10000AH. Testing charges varies according to types of batteries (i.e. For LA (Vented/ Monoblock) & For Ni-MH/ Ni-CD Cell/Battery)
8.3(Charge retention test)	-	100000	For VRLA: 100000 up to 250AH, 125000 for >250AH to 500AH, 150000 for >500AH to 5000AH, 200000 For >5000AH to 10000AH. Testing charges varies according to types of batteries (i.e. For LA (Vented/ Monoblock) & For Ni-MH/ Ni-CD Cell/Battery)
8.4(Cycle endurance in Photovoltaic application)	-	600000	For VRLA: 600000 up to 250AH, 750000 for >250AH to 500AH, 900000 for >500AH to 5000AH, 1200000 For >5000AH to 10000AH. Testing charges varies according to types of batteries (i.e. For LA (Vented/ Monoblock) & For Ni-MH/ Ni-CD Cell/Battery)
8.5(Sulphation Test)	-	30000	For VRLA: 30000 up to 250AH, 40000 for >250AH to 500AH, 45000 for >500AH to 5000AH, 60000 For >5000AH to 10000AH. Testing charges varies according to types of batteries (i.e. For LA (Vented/ Monoblock) & For Ni-MH/ Ni-CD Cell/Battery)
8.6(Water loss test)	-	0	-
8.7(Non spillability)	-	10000	For VRLA: 10000 up to 250AH, 10000 for >250AH to 500AH, 10000 for >500AH to 5000AH, 10000 For >5000AH to 10000AH. Testing charges varies according to types of batteries (i.e. For LA (Vented/ Monoblock) & For Ni-MH/ Ni-CD Cell/Battery)

Complete

20 Jun, 2022

-
-

IS 16046 (2015)

Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from them, for Use in Portable Applications ( First Revision )

- View breakup
Rs.Rs. 1,00,000/- for Ni Battery, Rs. 1,45,000/- for Ni Cell, Rs. 75,000/- for Li Battery, Rs. 1,45,000/- for Li Cell

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

20 Jun, 2022

-
-

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

1400000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	470000.00	470000.00 for upto 20kW, 690000.00 for Above 20kW - upto 50kW, 940000.00 for Above 50kW - upto 100kW, 1290000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
5(Marking and documentation)	-	30000.00	30000.00 for upto 20kW, 30000.00 for Above 20kW - upto 50kW, 30000.00 for Above 50kW - upto 100kW, 30000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
6(Environmental requirements and conditions)	-	60000.00	60000.00 for upto 20kW, 70000.00 for Above 20kW - upto 50kW, 80000.00 for Above 50kW - upto 100kW, 100000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
7(Protection against electric shock and energy hazards)	-	190000.00	190000.00 for upto 20kW, 240000.00 for Above 20kW - upto 50kW, 320000.00 for Above 50kW - upto 100kW, 410000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
8(Protection against Mechanical Hazards)	-	100000.00	100000.00 for upto 20kW, 130000.00 for Above 20kW - upto 50kW, 170000.00 for Above 50kW - upto 100kW, 210000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
9(Protection against Fire Hazards)	-	120000.00	120000.00 for upto 20kW, 150000.00 for Above 20kW - upto 50kW, 190000.00 for Above 50kW - upto 100kW, 230000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
10(Protection against Sonic Pressure Hazards)	-	50000.00	50000.00 for upto 20kW, 50000.00 for Above 20kW - upto 50kW, 50000.00 for Above 50kW - upto 100kW, 50000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
11(Protection against Liquid Hazards)	-	40000.00	40000.00 for upto 20kW, 40000.00 for Above 20kW - upto 50kW, 40000.00 for Above 50kW - upto 100kW, 40000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
12(Protection against Chemical Hazards)	-	40000.00	40000.00 for upto 20kW, 40000.00 for Above 20kW - upto 50kW, 40000.00 for Above 50kW - upto 100kW, 40000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
13(Physical Requirements)	-	240000.00	240000.00 for upto 20kW, 280000.00 for Above 20kW - upto 50kW, 340000.00 for Above 50kW - upto 100kW, 400000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.
14(Components)	-	60000.00	60000.00 for upto 20kW, 80000.00 for Above 20kW - upto 50kW, 100000.00 for Above 50kW - upto 100kW, 150000.00 for Above 100kW - upto 200kW. Note: Above Testing charges are included with IS 16221 (Part 1) also.

Complete

20 Jun, 2022

-
-

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 IS/IEC 61730-1( Classification, Application and Inteded Use)	-	5000	-
5, 5.1 IS/IEC 61730-1( Requirements for design and Construction)	-	195000	Complete testing charges for Clause number 5 including all sub clauses.
5.2 IS/IEC 61730-1( Marking and Documentation)	-	0	Testing charges already covered in clause number 5.
5.3, 5.3.1 IS/IEC 61730-1( Electrical Components and Insualtion)	-	0	Testing charges already covered in clause number 5.
5.3.2 IS/IEC 61730-1( Internal Wiring)	-	0	Testing charges already covered in clause number 5.
5.3.3 IS/IEC 61730-1( External Wirings and cables)	-	0	Testing charges already covered in clause number 5.
5.3.4 IS/IEC 61730-1( Connectors)	-	0	Testing charges already covered in clause number 5.
5.3.5 IS/IEC 61730-1( Junction Box for PV modules)	-	0	Testing charges already covered in clause number 5.
5.3.6 IS/IEC 61730-1( Front sheet and back Sheet)	-	0	Testing charges already covered in clause number 5.
5.3.7 IS/IEC 61730-1( Insulation Barrier)	-	0	Testing charges already covered in clause number 5.
5.3.8 IS/IEC 61730-1( Electrical Connections)	-	0	Testing charges already covered in clause number 5.
5.3.9 IS/IEC 61730-1( Encapsulants)	-	0	Testing charges already covered in clause number 5.
5.3.10 IS/IEC 61730-1( Bypass Diodes)	-	0	Testing charges already covered in clause number 5.
5.4, 5.4.1 IS/IEC 61730-1( Mechanical and Electromechanical connections)	-	0	Testing charges already covered in clause number 5.
5.4.2 IS/IEC 61730-1( Screw Connctions)	-	0	Testing charges already covered in clause number 5.
5.4.3 IS/IEC 61730-1( Rivets)	-	0	Testing charges already covered in clause number 5.
5.4.4 IS/IEC 61730-1( Thread Cutting Screws)	-	0	Testing charges already covered in clause number 5.
5.4.5 IS/IEC 61730-1( Form/Press/Tight/Fit)	-	0	Testing charges already covered in clause number 5.
5.4.6 IS/IEC 61730-1( Connections by adhesives)	-	0	Testing charges already covered in clause number 5.
5.4.7 IS/IEC 61730-1( Other Connections)	-	0	Testing charges already covered in clause number 5.
5.5, 5.5.1 IS/IEC 61730-1( Materials)	-	0	Testing charges already covered in clause number 5.
5.5.2 IS/IEC 61730-1( Polymeric Materials)	-	0	Testing charges already covered in clause number 5.
5.5.2.3.2 IS/IEC 61730-1( Endurance to Electrical Stress)	-	0	Testing charges already covered in clause number 5.
5.5.2.3.3 IS/IEC 61730-1( Endurance to thermal stress-RTE (RTI) or TI )	-	0	Testing charges already covered in clause number 5.
5.5.2.3.4 IS/IEC 61730-1( Polymeric Insulating materials used as external Parts)	-	0	Testing charges already covered in clause number 5.
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	0	Testing charges already covered in clause number 5.
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions )	-	0	Testing charges already covered in clause number 5.
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	0	Testing charges already covered in clause number 5.
5.5.3.2 IS/IEC 61730-1( Current Carrying Parts)	-	0	Testing charges already covered in clause number 5.
5.5.4 IS/IEC 61730-1(Adhesives)	-	0	Testing charges already covered in clause number 5.
5.6, 5.6.1 IS/IEC 61730-1( Protection Agianst Electric Shock)	-	0	Testing charges already covered in clause number 5.
5.6.2 IS/IEC 61730-1( Protection Agianst accessibility to hazardeous live parts)	-	0	Testing charges already covered in clause number 5.
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	0	Testing charges already covered in clause number 5.
5.6.4 IS/IEC 61730-1( Distance through Insulation)	-	0	Testing charges already covered in clause number 5.

Complete

20 Jun, 2022

-
-

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-35(Classification)	-	0	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	1000	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	2000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	3000	-
Cl. 11 IS 302-2-35(Heating)	-	5000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	4000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	2000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	5000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	4000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	5000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	2000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	2000	-
Cl. 22 IS 302-2-35(Construction )	-	3000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	1000	-
Cl. 24 IS 302-2-35(Components)	-	2000	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	1000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	3000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	1000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	2000	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	4000	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	1000	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	1000	-

Complete

20 Jun, 2022

-
-

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	0	-
8.0(Protection against access to live parts)	-	2000	-
7.0(Classification)	-	1000	-
10.0(Input and Current)	-	3000	-
11.0(Heating)	-	3000	-
13.0(Leakage Current and electric strength at operating temperature)	-	3000	-
14.0(Transient Overvoltage)	-	2000	-
15.0(Moisture resistance)	-	5000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	2000	-
17.0(Overload Protection of transformer and associated circuit)	-	2000	-
19.0(Abnormal Operation)	-	5000	Excluding the testing charges of EMI/EMC (Cl. 19.11.4.1 to 19.11.4.7 of IS 302-1:2008
20.0(Stability and mechanical hazards)	-	2000	-
21.0(Mechanical Strength)	-	3000	-
22.0(Construction)	-	5000	-
23.0(Internal Wiring)	-	2000	-
24.0(Components)	-	5000	Additional testing charges will be applicable for other components testing, if required. Excluding the testing charges of components
25.0(Supply Connection and External Flexible Cords)	-	3000	-
26.0(Terminals for external conductors)	-	1000	-
27.0(Provision For Earthing)	-	2000	-
28.0(Screws and Connections)	-	1000	-
29.0(Creepage Distances and Clearances)	-	2000	-
30.0(Resistance To Heat and Fire)	-	3000	-
31.0(Resistance To Rusting)	-	3000	-
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-

Complete

20 Jun, 2022

-
-

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

upto 3kW & above 3kW to 5kW

57000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	4000	4000 for Upto 3kW & 5000 for Upto 5kW
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.18 of IS 2082:2018( Reheating Time)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.22 of IS 2082:2018(Finish)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
7(Marking)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
6(Classification )	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	2000	2000 for Upto 3kW & 3000 for Upto 5kW
(Cl.11 of 302-2-21:2011)(Heating)	-	3000	3000 for Upto 3kW & 4000 for Upto 5kW
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	3000	3000 for Upto 3kW & 3000 for Upto 5kW
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	3000	3000 for Upto 3kW & 3000 for Upto 5kW
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	4000	4000 for Upto 3kW & 4000 for Upto 5kW
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	3000	3000 for Upto 3kW & 4000 for Upto 5kW
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.24ofIS302-221:2011)(Component)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	2000 for Upto 3kW & 2000 for Upto 5kW
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	3000	3000 for Upto 3kW & 3000 for Upto 5kW
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	999.99	1000 for Upto 3kW & 1000 for Upto 5kW
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	1000 for Upto 3kW & 1000 for Upto 5kW

Complete

20 Jun, 2022

-
-

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

105000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.10(Lamp minimum overall length)	-	3000	-
Clause No. 4.9(Lamp cap temperature rise)	-	5000	-
Clause No. 4.8(Creepage distance for caps)	-	3000	-
Clause No. 4.7(Resistance to heat & fire)	-	20000	-
Clause No. 4.6(Parts which can become accidentally live)	-	2000	-
Clause No. 4.5(Electric strength )	-	3000	-
Clause No. 4.4(Insulation Resistance Measurement)	-	2000	-
Clause No. 4.3(Mechanical requirement for caps)	-	65000	-
Clause No. 4.2 (Marking.)	-	2000	-

Complete

20 Jun, 2022

-
-

IS 10617 (2018)

Hermetic compressors - Specification (Second Revision)

975000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.1 & 5.1 -Table 2, 3, 4,5(Compressor Performance Test & Compressor Capacity Rating Test)	-	400000		-

Complete

20 Jun, 2022

-
-

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

103000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Insulation and Wiring)	-	0	5000 for Battery, 3000 for Cells. Testing Charges already included in clause 5.
5.3(Venting)	-	0	5000 for Battery, 3000 for Cells. Testing Charges already included in clause 5.
5.4(Temperature, Voltage and Current Management)	-	0	5000 for Battery, 3000 for Cells. Testing Charges already included in clause 5.
5.5(Terminal Contacts)	-	0	5000 for Battery, 3000 for Cells. Testing Charges already included in clause 5.
5.6(Assembly of Cells into batteries)	-	0	5000 for Battery, 3000 for Cells. Testing Charges already included in clause 5.
5.7(Quality Plan)	-	0	5000 for Battery, 3000 for Cells. Testing Charges already included in clause 5.
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	90000	90000 for Battery, 137000 for Cells. Total testing Charges for clause 7.
7.1(Charging procedure for test purposes)	-	0	90000 for Battery, 137000 for Cells. Testing Charges already included in clause 7.
7.2(Intended Use)	-	0	90000 for Battery, 137000 for Cells. Testing Charges already included in clause 7.
7.3(Reasonably foreseeable misuse)	-	0	90000 for Battery, 137000 for Cells. Testing Charges already included in clause 7.
8(Information for safety)	-	6000	6000 for Battery, 6000 for Cells. Testing Charges for clause 8.
8.1(General)	-	0	6000 for Battery, 6000 for Cells. Testing Charges already included in clause 8.
8.2(Small Cell and battery safety information)	-	0	6000 for Battery, 6000 for Cells. Testing Charges already included in clause 8.
9(Marking)	-	1000	1000 for Battery, 1000 for Cells. Testing Charges of clause 9.
9.1(Cell Marking)	-	0	1000 for Battery, 1000 for Cells. Testing Charges already included in clause 9.
9.2(Battery Marking)	-	0	1000 for Battery, 1000 for Cells. Testing Charges already included in clause 9.
9.3(Caution for ingestion of small cells and batteries)	-	0	1000 for Battery, 1000 for Cells. Testing Charges already included in clause 9.
9.4(Other information)	-	0	1000 for Battery, 1000 for Cells. Testing Charges already included in clause 9.
10(Packaging)	-	1000	1000 for Battery, 1000 for Cells.
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	5000	5000 for Battery, 3000 for Cells. Testing Charges of clause 5.
5.1(General)	-	0	5000 for Battery, 3000 for Cells. Testing Charges already included in clause 5.

Complete

20 Jun, 2022

-
-

IS 16046 : Part 2 (2018)

123000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	-
5(General Safety Considerations)	-	5000	5000 for Battery, 3000 for Cells.
5.1(General)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
5.2(Insulation and Wiring)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
5.3(Venting)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
5.4(Temperature, Voltage and Current Management)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
5.5(Terminal Contacts)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
5.6(Assembly of Cells into batteries)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
5.7(Quality Plan)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
5.8(Battery Safety Components)	-	0	5000 for Battery, 3000 for Cells. Testing charges already included in clause 5.
6(Tyoe Test amd Sample Size)	-	0	-
7(Specific requirements and tests)	-	110000	110000 for Battery, 120000 for Cells.
7.1(Charging procedure for test purposes)	-	0	110000 for Battery, 120000 for Cells. Testing charges already included in clause 7.
7.2(Intended Use)	-	0	110000 for Battery, 120000 for Cells. Testing charges already included in clause 7.
7.3(Reasonably foreseeable misuse)	-	0	110000 for Battery, 120000 for Cells. Testing charges already included in clause 7.
8(Information for safety)	-	6000	6000 for Battery, 6000 for Cells.
8.1(General)	-	0	6000 for Battery, 6000 for Cells. Testing charges already included in clause 8.
8.2(Small Cell and battery safety information)	-	0	6000 for Battery, 6000 for Cells. Testing charges already included in clause 8.
9(Marking)	-	1000	1000 for Battery, 1000 for Cells.
9.1(Cell Marking)	-	0	1000 for Battery, 1000 for Cells. Testing charges already included in clause 9.
9.2(Battery Marking)	-	0	1000 for Battery, 1000 for Cells. Testing charges already included in clause 9.
9.3(Caution for ingestion of small cells and batteries)	-	0	1000 for Battery, 1000 for Cells. Testing charges already included in clause 9.
9.4(Other information)	-	0	1000 for Battery, 1000 for Cells. Testing charges already included in clause 9.
10(Packaging)	-	1000	1000 for Battery, 1000 for Cells.

Complete

20 Jun, 2022

-
-

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 369:2019(Dimensions)	-	5000	-
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	5000	-
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	5000	-
Cl.10 of IS 369:2019(Warming-up time of the heater)	-	5000	-
Cl.11 of IS 369:2019(Stability of room temperature)	-	10000	-
Cl.12 of IS 369:2019(Set-back)	-	10000	-
Cl.14 of IS 369:2019(Inrush current)	-	5000	-
Cl.15 of IS 369:2019(Effect of radiant heat)	-	10000	-
Cl.16 of IS 369:2019(Usable power)	-	5000	-
Cl.13 of IS 369:2019(Frost protection temperature)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

41000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Rating)	-	1000	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	Testing charges already included in clause number 8.
8.1,a(Marking )	-	0	Testing charges already included in clause number 8.
8.1,b(Marking )	-	0	Testing charges already included in clause number 8.
8.1,c(Marking )	-	0	Testing charges already included in clause number 8.
8.1,d(Marking )	-	0	Testing charges already included in clause number 8.
8.1,e(Marking )	-	0	Testing charges already included in clause number 8.
8.1,f(Marking )	-	0	Testing charges already included in clause number 8.
8.1,g(Marking )	-	0	Testing charges already included in clause number 8.
8.2(Marking )	-	0	Testing charges already included in clause number 8.
8.3,a(Marking )	-	0	Testing charges already included in clause number 8.
8.3,b(Marking )	-	0	Testing charges already included in clause number 8.
8.3,c(Marking )	-	0	Testing charges already included in clause number 8.
8.3,d(Marking )	-	0	Testing charges already included in clause number 8.
8.3,e(Marking )	-	0	Testing charges already included in clause number 8.
8.4(Marking )	-	0	Testing charges already included in clause number 8.
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	1000	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	0	Testing charges already included in clause number 8.
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	0	Testing charges already included in clause number 8.
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	0	Testing charges already included in clause number 8.
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	0	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	0	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	0	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	0	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	0	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	0	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	0	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	0	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	0	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	0	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	0	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	0	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	0	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	0	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	0	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	0	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	0	-
10.1(Speed Regulators)	-	3000	-
10.2(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.3(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.4(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.5(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.6(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.7(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
10.8(Speed Regulators)	-	0	Testing charges already included in clause number 10.1
11.1(Starting)	-	1000	-
11.2(Starting)	-	0	Testing charges already included in clause number 11.1
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	0	-
14.4(Measurement of Speed of the Fan )	-	2000	-
14.5(Measurement of Power factor and Power Input)	-	3000	-
16(Endurance Test)	-	10000	-
17(Test for Harmonic Distortion)	-	8000	-

Complete

20 Jun, 2022

-
-

IS 3315 (2019)

Evaporative air coolers (Desert Coolers?) - Specification (Third Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(PERFORMANCE REQUIREMENTS)	-	40000	Charges for Cl. 6.1& 9.3- Rs.10000, For Cl. 6.2(c),8.2.8 &8.4.3-Rs.10000, For Cl. 6.2(a),(b)& 10.4- Rs.20000
8.2.8, 8.4.3,& 6.2©(Power Consumption Test)	-	10000	Charges are for Cl. 6.2(c),8.2.8,8.4.3
8.3.1 ,8.4.2, & 6.2(Cooling Efficiency and Air Delivery Test)	-	10000	Charges are for 6.2 (a),(b) & 10.4
8.2.2(Protection against Electric Shock )	-	5000	-
8.2.3 (High Voltage Tests)	-	5000	-
8.2.4(Insulation Resistance Test)	-	5000	-
8.2.5( Leakage Current)	-	5000	-
8.2.6( Earthing Connections Tests)	-	5000	-
9.5( Energy Consumption)	-	10000	-
15( MARKING AND INFORMATION)	-	5000	-

Complete

20 Jun, 2022

-
-

IS 11037 (2019)

Electronic Type Fan Regulators — Specification ( First Revision )

72000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Design and General Construction)	-	5000	-
6.2(Design and General Construction)	-	0	Testing charges already included in 6.1
6.3(Design and General Construction)	-	0	Testing charges already included in 6.1
6.5(Design and General Construction)	-	0	Testing charges already included in 6.1
6.6(Design and General Construction)	-	0	Testing charges already included in 6.1
7.4.1(a)(Mechanical strength )	-	2000	-
7.4.1(b)(Mechanical strength )	-	0	Testing charges already included in 7.4
7.6(General and safety requirements)	-	2000	-
7.7(Voltage drop)	-	2000	-
8.1(Performance)	-	5000	-
8.2(Performance)	-	0	Testing charges already included in 8.1
8.3(Performance)	-	0	Testing charges already included in 8.1
9.1 (a)(Marking )	-	2000	-
9.1 (b)(Marking )	-	0	Testing charges already included in 9.1
9.1 (c)(Marking )	-	0	Testing charges already included in 9.1
9.1 (d)(Marking )	-	0	Testing charges already included in 9.1
9.1 (e)(Marking )	-	0	Testing charges already included in 9.1
9.1 (f)(Marking )	-	0	Testing charges already included in 9.1
9.5.1 , 7.3 (a)(Temperature Rise )	-	5000	-
9.5.1 , 7.3(Temperature Rise)	-	0	Testing charges already included in 9.5.1
9.5.1 , 7.3 (b)(Temperature Rise)	-	0	Testing charges already included in 9.5.1
9.5.2, 7.2(Leakage Current Test(as per Cl.13.2 of IS 302 (Part 1).)	-	2000	-
9.5.3(High Voltage Test)	-	2000	-
9.5.7, 9.5.4(Moisture Resistance )	-	7000	-
9.5.5(Earthing Connection)	-	2000	-
9.5.6(Protection against electric shock (as per Cl.8 of IS 302 (Part 1))	-	2000	-
9.5.8, (Mechanical strength (as per Cl.21.1 of IS 302-1:2008))	-	2000	-
9.5.9, 7.5, Table-1(Creepage Distances and Clearances (as per Cl. 29 of IS 302-1))	-	2000	-
9.5.10( Electrical Endurance Test)	-	5000	-
9.5.11.3(Environmental Tests)	-	10000	Testing charges for cold test and dry heat test.
9.5.11.4(Environmental Tests)	-	5000	-
9.5.12(Resistance to Abnormal Heat and to Fire)	-	5000	-
9.5.13(Resistance to Rusting )	-	3000	-
9.5.14(Checking of Dimensions)	-	2000	-
9.2(Marking )	-	0	-
9.5.11.2(Environmental Tests)	-	4000	-

Complete

20 Jun, 2022

-
-

IS 14286 : Part 1 : Sec 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules (Second Revision)

1315000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Visual inspection (MQT 01))	-	5000	-
11.2(Maximum power determination (MQT 02))	-	10000	-
11.3(Insulation test (MQT 03))	-	5000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	60000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	20000	-
11.6(Performance at STC and NMOT (MQT 06))	-	80000	-
11.7(Performance at low irradiance (MQT 07))	-	30000	-
11.8(Outdoor exposure test (MQT 08))	-	30000	-
11.9(Hot-spot endurance test (MQT 09))	-	200000	-
11.1(UV preconditioning test (MQT 10))	-	100000	-
11.11(Thermal cycling test (MQT 11))	-	250000	-
11.12(Humidity-freeze test (MQT 12))	-	100000	-
11.13(Damp heat test (MQT 13))	-	150000	-
11.14(Robustness of terminations (MQT 14))	-	10000	-
11.15(Wet leakage current test (MQT 15))	-	5000	-
11.16(Static mechanical load test (MQT 16))	-	20000	-
11.17(Hail test (MQT 17))	-	10000	-
11.18(Bypass diode thermal test (MQT 18))	-	80000	-
11.19(Stabilization (MQT 19))	-	150000	-

Complete

20 Jun, 2022

-
-

IS 14286 : Part 1 : Sec 2 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 2 special requirements for testing of thin - Film cadmium telluride (CdTe) based photovoltaic (Pv) modules (Second Revision)

1465000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 IS 14286( Marking and Documentation)	-	0	-
11.1 IS 14286( Visual inspection)	-	5000	-
11.2 IS 14286( Maximum power determination)	-	10000	-
11.3 IS 14286( Insulation Test)	-	5000	-
11.4 IS 14286( Measurement of temperature coefficients)	-	60000	-
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	20000	-
11.6 IS 14286( Performance at STC and NMOT)	-	80000	-
11.7 IS 14286( Performance at low irradiance)	-	30000	-
11.8 IS 14286( Outdoor exposure Test)	-	30000	-
11.9 IS 14286( Hot-spot endurance test)	-	200000	-
11.10 IS 14286( UV Preconditioning test )	-	100000	-
11.11 IS 14286( Thermal cycling test)	-	250000	-
11.12 IS 14286( Humidity-freeze test)	-	100000	-
11.13 IS 14286(Damp heat test)	-	150000	-
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	10000	-
11.15 IS 14286( Wet leakage current test)	-	5000	-
11.16 IS 14286( Static Mechanical load test)	-	20000	-
11.17, Table 3 & 4, IS 14286( Hail test)	-	10000	-
11.18 IS 14286( Bypass diode testing)	-	80000	-
11.19 IS 14286( Stabilization )	-	300000	-

Complete

20 Jun, 2022

-
-

IS 14286 : Part 1 : Sec 3 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 3 special requirements for testing of thin - Film amorphous silicon based photovoltaic (Pv) modules (Second Revision)

1465000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 IS 14286( Marking and Documentation)	-	0	-
11.1 IS 14286( Visual inspection)	-	5000	-
11.2 IS 14286( Maximum power determination)	-	10000	-
11.3 IS 14286( Insulation Test)	-	5000	-
11.4 IS 14286( Measurement of temperature coefficients)	-	60000	-
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	20000	-
11.6 IS 14286( Performance at STC and NMOT)	-	80000	-
11.7 IS 14286( Performance at low irradiance)	-	30000	-
11.8 IS 14286( Outdoor exposure Test)	-	30000	-
11.9 IS 14286( Hot-spot endurance test)	-	200000	-
11.10 IS 14286( UV Preconditioning test )	-	100000	-
11.11 IS 14286( Thermal cycling test)	-	250000	-
11.12 IS 14286( Humidity-freeze test)	-	100000	-
11.13 IS 14286(Damp heat test)	-	150000	-
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	10000	-
11.15 IS 14286( Wet leakage current test)	-	5000	-
11.16 IS 14286( Static Mechanical load test)	-	20000	-
11.17, Table 3 & 4, IS 14286( Hail test)	-	10000	-
11.18 IS 14286( Bypass diode testing)	-	80000	-
11.19(Stabilization (MQT 19))	-	300000	-

Complete

20 Jun, 2022

-
-

IS 14286 : Part 1 : Sec 4 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 4 special requirements for testing of thin - Film Cu(In,ga)(S,se)2 based photovoltaic (Pv) modules (Second Revision)

1465000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Insulation test (MQT 03))	-	5000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	60000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	20000	-
11.6(Performance at STC and NMOT (MQT 06))	-	80000	-
11.7(Performance at low irradiance (MQT 07))	-	30000	-
11.8(Outdoor exposure test (MQT 08))	-	30000	-
11.9(Hot-spot endurance test (MQT 09))	-	200000	-
11.1(UV preconditioning test (MQT 10))	-	100000	-
11.11(Thermal cycling test (MQT 11))	-	250000	-
11.12(Humidity-freeze test (MQT 12))	-	100000	-
11.13(Damp heat test (MQT 13))	-	150000	-
11.14(Robustness of terminations (MQT 14))	-	10000	-
11.15(Wet leakage current test (MQT 15))	-	5000	-
11.16(Static mechanical load test (MQT 16))	-	20000	-
11.17(Hail test (MQT 17))	-	10000	-
11.18(Bypass diode thermal test (MQT 18))	-	80000	-
11.19(Stabilization (MQT 19))	-	300000	-

Complete

20 Jun, 2022

-
-

IS 16169 (2019)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures (First Revision)

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Test for single or multi-phase inverter)	-	100000	Testing Charges mentioned are for Upto 20kW. For >20kW to 50kW =Rs.150000 For >50kW to 100kW =Rs.200000 For >100kW to 200kW =Rs.300000
Annex A(Islanding as it applies to PV systems)	-	0	-
Annex B(Test for independent islanding device)	-	0	-

Complete

20 Jun, 2022

-
-

IS 1474 (1959)

Specification for commercial refrigerators

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.5.1(Pressure Test)	-	10000	-
7.5.3(Insulation Resistance Test (Assembly Test))	-	5000	-
7.5.4(Thermal Insulation Test)	-	25000	-
7.5.5(Condensation Test)	-	50000	-
7.5.6(Rating Test)	-	140000	-
7.5.7(Test for Adequate Rating of Compressor Motor)	-	80000	-
7.5.8(Door Seal Test)	-	5000	-
3.3.1(Gross Volume)	-	5000	Testing charges are for Cl. 3
3.3(Volume of evaporator space)	-	0	Testing charges are mentioned in cl. 3.3.1

Complete

20 Jun, 2022

-
-

IS 2312 (1967)

Specification for propeller type AC ventilating fans (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Sizes )	-	1000	Testing charges are for Cl. no.3
4.1(Rated Voltage)	-	0	-
5.1(Rated frequency)	-	0	-
6.1(Design and General Construction)	-	2000	Testing charges are for Cl. no.6
6.3(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.3(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.4(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.5(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.6(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.7(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.9(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.1(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.11(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
6.12(Design and General Construction)	-	0	Testing charges are for Cl. no.6.1
7.1(Design and General Construction)	-	0	-
8.1(Design and General Construction)	-	0	-
9(Design and General Construction)	-	0	-
10.1(Starting )	-	3000	Testing charges are for Cl. no.10
11.1(Interchangeability)	-	2000	Testing charges are for Cl. no.11
13.1(Marking)	-	0	-
13.1 (a)(Marking)	-	0	-
13.1 (b)(Marking)	-	0	-
13.1 (c)(Marking)	-	0	-
13.1 (d)(Marking)	-	0	-
13.1 (e)(Marking)	-	0	-
13.1 (f)(Marking)	-	0	-
13.1 (g)(Marking)	-	0	-
13.1 (h)(Marking)	-	0	-
13.1 (j)(Marking)	-	0	-
13.2(Marking)	-	0	-
13.4(Marking)	-	0	-
14.2 & 15.1(Air Delivery)	-	6000	Testing charges are for Cl. no.14.2
14.3.A(Temperature-Rise (for motors))	-	3000	Testing charges are for Cl. no.14.3
14.3.A(Temperature-Rise (for motors))	-	0	Testing charges are for Cl. no.14.3
14.3.A(Temperature-Rise (for motors))	-	0	Testing charges are for Cl. no.14.3
14.3.A(Temperature-Rise (for motors))	-	0	Testing charges are for Cl. no.14.3
14.3.B(Temperature-Rise (for regulators))	-	0	Testing charges are for Cl. no.14.3
14.3.B(Temperature-Rise (for regulators))	-	0	Testing charges are for Cl. no.14.3
14.3.B(Moistureproofness (for regulators only))	-	0	Testing charges are for Cl. no.14.3
14.3.B(Moistureproofness (for regulators only))	-	0	Testing charges are for Cl. no.14.3
14.5(Mechanical Endurance (for regulators only))	-	0	-
14.1 & 14.6(Power factor)	-	2000	Testing charges are for Cl. no.14.6
14.7(ac leakage)	-	1000	-
14.8(High voltage test)	-	1000	-
14.9(Insulation-Resistance)	-	3000	-
14.1(Earthing continuity)	-	2000	-
14.11 & 15.1(Electrical Input)	-	3000	Testing charges are for Cl. no.14.11
14.12 & 16(Fan Speed)	-	4000	Testing charges are for Cl. no.14.12
14.4(Moistureproofness (for regulators only))	-	5000	-
14.4(Moistureproofness (for regulators only))	-	0	Testing charges are for Cl. no.14.4

Complete

20 Jun, 2022

-
-

IS 1534 : Part 1 (1977)

Ballasts for fluorescent lamps:Part 1 For switch start circuits

72000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.13(Performance)	-	10000	-
9.12(Resistance To Corrosion)	-	1000	-
9.11(Resistance To Heat)	-	3000	-
9.1(Test for Mechanical Strength)	-	2000	-
9.9(Test For Limitations Of Ballast Heating)	-	5000	-
9.8(Test for Thermal Endurance Of Windings)	-	30000	-
9.7(Moisture Resistance and Insulation)	-	2000	-
9.6(Voltage Across Capacitors)	-	1000	-
9.5(Protection against Accidental Contacts and Electric Shock)	-	2000	-
9.4(Visual Examination)	-	1000	-
8(Marking)	-	2000	-
7(Creepage Distances and Clearances)	-	2000	-
6(Provision For Earthing)	-	2000	-
5(Screws, Current-Carrying Parts And Connections)	-	1000	-
4(Terminals For External Wiring)	-	3000	-
3(General Design, Construction and workmanship)	-	2000	-

Complete

20 Jun, 2022

-
-

IS 4283 (1981)

Withdrawal

- View breakup
Rs. 47,000/- upto 3 kW

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

20 Jun, 2022

-
-

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

74000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.0(Measurement of Heating up time)	-	3000	-
11.0(Measurement of sole plate temperature)	-	3000	-
12.0(Measurement of Tempearture Distribution)	-	3000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	3000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	3000	0
16.0(Measurement of Thermostatic staibility)	-	4000	-
17(Finish)	-	1000	-

Complete

20 Jun, 2022

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Hi Physix Laboratory India Private Limited

B-32/1/2, MIDC, Industrial Area, Ranjangaon, Pune, Pune, Pune, Maharashtra, 412220

8552003805 [email protected]

Scope List

No Record Found

No Record Found

No Record Found