BIS - LIMS (Laboratory Information Management System)

GEO CHEM LABORATORIES PVT.LTD.

Plot No-306, Udyog Vihar, Phase-2, Gurugram, Haryana, Gurugram, Gurugram, Haryana, 122016

9871590424 [email protected]

Scope List

Reset

48 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 6719 (1972)

Solid Pvc Soles And Heels

3800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.1(Hardness )	-	500	As per applicable clause
3.6 (vi)(Lead (as Pb) ppm)	-	500	As per applicable clause
3.6 (v)(Volatility, percent by means )	-	500	As per applicable clause
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	500	As per applicable clause
3.6 (iii)(Elongation at break, percent )	-	500	As per applicable clause
3.6 (ii)(Tensile Strength )	-	500	As per applicable clause
3.6 (i)(Relative density )	-	500	As per applicable clause
Cl.3,3.1,3.2,3.3,3.4,3.5(Material)	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

6700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Flexing resistance )	-	400	As per applicable clause
4.2(Water absorption)	-	400	As per applicable clause
4.2(Heat Shrinkage )	-	400	As per applicable clause
4.2(Shrinkage at room temp)	-	400	As per applicable clause
4.2(Split tear strength)	-	400	As per applicable clause
4.2(Compression set)	-	400	As per applicable clause
4.2(Hardness (Shore A))	-	400	As per applicable clause
4.2(Density )	-	400	As per applicable clause
4.2(Size & Thickness )	-	400	As per applicable clause
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, ii)(Hardness, Shore A durometer min)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, vii)(Heat shrinkage test at 100±1°C for 1 hour max)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	400	As per applicable clause
Cl.4 Cl.4.1.3 And 8.3,Table1, ix)(Flexing resistance)	-	400	As per applicable clause
5, 5.1(Marking)	-	400	As per applicable clause
6, 6.1(Packing)	-	400	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	400	As per applicable clauses
5/5.1(REQUIREMENTS-General)	-	400	As per applicable clauses
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	400	As per applicable clauses
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	400	As per applicable clauses
6(Marking and packing)	-	400	As per applicable clauses
8.1(Test methods)	-	400	As per applicable clauses
8.3(Measurement of thickness)	-	400	As per applicable clauses

Complete

28 Oct, 2023

-
-

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

19688 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	As per applicable Clauses
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	500	As per applicable Clauses
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	500	As per applicable Clauses
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	As per applicable Clauses
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	500	As per applicable Clauses
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	As per applicable Clauses
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	As per applicable Clauses
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	As per applicable Clauses
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	500	As per applicable Clauses
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	500	As per applicable Clauses
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	As per applicable Clauses
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	500	As per applicable Clauses
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	As per applicable Clauses
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	As per applicable Clauses
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	As per applicable Clauses
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	500	As per applicable Clauses
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	500	As per applicable Clauses
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	500	As per applicable Clauses
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	As per applicable Clauses
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	As per applicable Clauses
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	500	As per applicable Clauses
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	500	As per applicable Clauses
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	As per applicable Clauses
5, 5.1(Requirement)	-	500	As per applicable Clauses
6.1(Marking)	-	500	As per applicable Clauses
6, 6.1(Packing)	-	500	As per applicable Clauses

Complete

28 Oct, 2023

-
-

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

21713 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.2(Marking)	-	500	-
7.4(Marking)	-	500	-
7.5(Marking)	-	500	-
7.6(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
9(Starting, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance-Spillage test)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19(Abnormal Operation, IS 302-1)	-	1000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21(Mechanical Strength, IS 302-1)	-	1000	-
22.1(Construction, IS 302-1)	-	500	-
22.2(Construction)	-	500	-
22.3(Construction)	-	500	-
22.4(Construction)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction)	-	500	-
22.8(Construction)	-	500	-
22.9(Construction)	-	500	-
23(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components)	-	1000	-
24.4(Components)	-	1000	-
24.5(Components)	-	1000	-
24.6(Components)	-	1000	-
24.7(Components)	-	1000	-
24.8(Components)	-	1000	-
24.9(Components)	-	1000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	1000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	1000	-
34.3(Whisking egg whites )	-	1000	-
34.4(IDLI batter-Grinding of black gram)	-	500	-
34.4(IDLI batter-Grinding of rice)	-	500	-
34.5.1 (a)(Operational test for juicers )	-	500	-
34.5.1 (b)(Operational test for juicers )	-	500	-
34.5.2(Operational test for juicers )	-	500	-
35(Temperature withstand test for bowl)	-	500	-
36(Test for controls )	-	500	-
37(Strength of Assembly )	-	500	-
Cl 37(Verification)	-	500	-
Cl 36(Verification)	-	500	-
Cl 35(Verification)	-	500	-
Cl 34(Verification)	-	500	-
Cl.32(Verification)	-	500	-
Cl.31(Verification)	-	500	-
Cl.30(Verification)	-	500	-
CL.29(Verification)	-	500	-
Cl.28(Verification)	-	500	-
Cl.27(Verification)	-	500	-
Cl.26(Verification)	-	500	-
Cl.25(Verification)	-	500	-
Cl.24(Verification)	-	500	-
Cl.23(Verification)	-	500	-
Cl.22(Verification)	-	500	-
Cl.21(Verification)	-	500	-
Cl.20(Verification)	-	500	-
Cl.19(Verification)	-	500	-
Cl.18(Verification)	-	500	-
Cl. 16(Verification)	-	500	-
Cl.15(Verification)	-	500	-
Cl.14(Verification)	-	500	-
Cl.13(Verification)	-	500	-
Cl.11(Verification)	-	500	-
Cl.10(Verification)	-	500	-
Cl.8(Verification)	-	500	-
Cl. 7(Verification)	-	500	-
Cl. 6(Verification)	-	500	-

Complete

28 Oct, 2023

-
-

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

24750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	500	As per applicable clauses
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	500	As per applicable clauses
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	500	As per applicable clauses
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	500	As per applicable clauses
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	500	As per applicable clauses
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	500	As per applicable clauses
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	500	As per applicable clauses
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	500	As per applicable clauses
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	500	As per applicable clauses
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	500	As per applicable clauses
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	500	As per applicable clauses
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	As per applicable clauses
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	500	As per applicable clauses
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	500	As per applicable clauses
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	500	As per applicable clauses
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	500	As per applicable clauses
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	As per applicable clauses
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	500	As per applicable clauses
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	500	As per applicable clauses
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	500	As per applicable clauses
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	500	As per applicable clauses
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	500	As per applicable clauses
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	500	As per applicable clauses
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	500	As per applicable clauses
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	500	As per applicable clauses
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	500	As per applicable clauses
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	500	As per applicable clauses
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	500	As per applicable clauses
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	500	As per applicable clauses
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	500	As per applicable clauses
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	500	As per applicable clauses
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	500	As per applicable clauses
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	500	As per applicable clauses
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	500	As per applicable clauses
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	500	As per applicable clauses
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	500	As per applicable clauses
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	500	As per applicable clauses
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	500	As per applicable clauses
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	500	As per applicable clauses
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	500	As per applicable clauses
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	500	As per applicable clauses
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	500	As per applicable clauses
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	500	As per applicable clauses
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	500	As per applicable clauses
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	500	As per applicable clauses
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	500	As per applicable clauses
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	500	As per applicable clauses
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	As per applicable clauses
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	500	As per applicable clauses
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	500	As per applicable clauses
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	500	As per applicable clauses
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	500	As per applicable clauses
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	500	As per applicable clauses
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	500	As per applicable clauses
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	500	As per applicable clauses
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	500	As per applicable clauses
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	500	As per applicable clauses
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	500	As per applicable clauses
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	500	As per applicable clauses
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	500	As per applicable clauses
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	500	As per applicable clauses
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	500	As per applicable clauses
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	500	As per applicable clauses
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	500	As per applicable clauses
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	500	As per applicable clauses
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	500	As per applicable clauses
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	500	As per applicable clauses
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	500	As per applicable clauses
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	500	As per applicable clauses
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	500	As per applicable clauses
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	500	As per applicable clauses
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	500	As per applicable clauses
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	500	As per applicable clauses
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	500	As per applicable clauses
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	500	As per applicable clauses
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	500	As per applicable clauses
4(Types)	-	500	As per applicable clauses
5(Requirements)	-	500	As per applicable clauses
5.1(Design)	-	500	As per applicable clauses
5.10(consolidation test IS 3400 (Part 5))	-	500	As per applicable clauses
5.2.4(Reinforcing Material)	-	500	As per applicable clauses
5.2.8.4(Colour of the lace)	-	500	As per applicable clauses
5.3, 5.3.1,5.3.3,5.3.4(Construction)	-	500	As per applicable clauses
5.10(Consolidation Test IS 3400 (Part 5) : 1986)	-	500	As per applicable clauses
8(CHEMICAL REQUIREMENTS)	-	5000	As per applicable clauses
9, 9.1(BIS CERTIFICATION MARKING)	-	500	As per applicable clauses
10(Marking)	-	500	As per applicable clauses
11(Packing)	-	500	As per applicable clauses

Complete

28 Oct, 2023

-
-

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

24300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	500	As applicable Clause
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	500	As applicable Clause
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	500	As applicable Clause
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	500	As applicable Clause
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	500	As applicable Clause
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	500	As applicable Clause
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	500	As applicable Clause
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	500	As applicable Clause
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	500	As applicable Clause
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	500	As applicable Clause
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	500	As applicable Clause
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	500	As applicable Clause
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	500	As applicable Clause
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	500	As applicable Clause
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	500	As applicable Clause
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	500	As applicable Clause
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	500	As applicable Clause
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	500	As applicable Clause
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	500	As applicable Clause
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	500	As applicable Clause
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	500	As applicable Clause
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	500	As applicable Clause
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	500	As applicable Clause
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	500	As applicable Clause
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	500	As applicable Clause
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	500	As applicable Clause
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	500	As applicable Clause
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	500	As applicable Clause
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	3000	As applicable Clause
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	500	As applicable Clause
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	500	As applicable Clause
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	500	As applicable Clause
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	As applicable Clause
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	500	As applicable Clause
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	500	As applicable Clause
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	500	As applicable Clause
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	500	As applicable Clause
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	500	As applicable Clause
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	500	As applicable Clause
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	500	As applicable Clause
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	500	As applicable Clause
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	500	As applicable Clause
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	500	As applicable Clause
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	500	As applicable Clause

Complete

28 Oct, 2023

-
-

IS 3735 (1996)

Canvas Shoes, Rubber Sole

18900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	500	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	500	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	500	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	500	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	500	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	500	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	500	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	500	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	500	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	500	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	500	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	500	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	500	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	500	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	500	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	500	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	500	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	500	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	500	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	500	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	500	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	500	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	500	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	500	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	500	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	500	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	500	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	500	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	500	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	500	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	500	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	500	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	500	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	500	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	500	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	500	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	500	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	500	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	500	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	500	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	500	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	500	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	500	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	500	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	500	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	500	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	500	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	500	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	500	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	500	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	500	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	500	-
4.8(Adhesion )	-	500	-
4.7(Consolidation test )	-	1000	-
4.6(Mass )	-	500	-
4.5(Finish )	-	500	-
4.4(Contruction )	-	500	-
4.3(Leg Height )	-	500	-
4.2(Design )	-	500	-
4.1.6.2(Thickness of components )	-	500	-
4.1.6.2(Ageing)	-	500	-
4.1.6(Compression set )	-	1000	-
4.1.6(Elongation at break )	-	1000	-
4.1.6(Tensile strength)	-	1000	-
4.1.6(Hardness (after accelerated ))	-	500	-
4.1.6(Flexing resistance test)	-	1000	-
4.1.6(Hardness )	-	500	-
4.1.6(Relative density)	-	500	-
4.1.5(Sulpher dyes content )	-	2000	-
4.1.5(Breaking Load )	-	1000	-
4.1.5(Length )	-	500	-
4.1.4(Thickness)	-	500	-
4.1.4(Size )	-	500	-
4.1.3(Color fastness to perspiration)	-	500	-
4.1.3(Colorfastness to washing)	-	500	-
4.1.3(Colorfastness to light )	-	1000	-
4.1.3(Single thread breaking load)	-	1000	-
4.1.3(Construction )	-	500	-
4.1.2(Colorfastness to light )	-	1000	-
4.1.2(Colorfastness to washing)	-	500	-
4.1.2(Breaking Strength )	-	1000	-
4.1.2(Width )	-	500	-
4.1.1.2(Colorfastness to washing)	-	500	-
4.1.1.1(Colorfastness to light )	-	1000	-
4.1.1 (Drill) (End & Picks/dm)	-	500	-
4.1.1 (Drill) (Colorfastness to light )	-	1000	-
4.1.1 (canvas )(End & Picks/dm)	-	500	-
4.1.1 (canvas )(Breaking Load )	-	1000	-

Complete

28 Oct, 2023

-
-

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	As per applicable clause
6(Classification )	-	1000	As per applicable clause
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	1000	As per applicable clause
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	As per applicable clause
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	As per applicable clause
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	As per applicable clause
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	As per applicable clause
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	As per applicable clause
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	As per applicable clause
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	As per applicable clause
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	As per applicable clause
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	1000	As per applicable clause
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	1000	As per applicable clause
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1000	As per applicable clause
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	1000	As per applicable clause
(Cl.24ofIS302-221:2011)(Component)	-	1000	As per applicable clause
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	1000	As per applicable clause
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	1000	As per applicable clause
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	1000	As per applicable clause
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	1000	As per applicable clause
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	As per applicable clause
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	As per applicable clause
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	1000	As per applicable clause
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	1000	As per applicable clause
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	1000	As per applicable clause
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	1000	As per applicable clause
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	1000	As per applicable clause
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	As per applicable clause
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	1000	As per applicable clause
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	1000	As per applicable clause
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	1000	As per applicable clause
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	1000	As per applicable clause
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	1000	As per applicable clause
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	1000	As per applicable clause
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	1000	As per applicable clause
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	1000	As per applicable clause
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	1000	As per applicable clause
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	1000	As per applicable clause
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	1000	As per applicable clause
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	1000	As per applicable clause
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	1000	As per applicable clause
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	1000	As per applicable clause
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	1000	As per applicable clause
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	1000	As per applicable clause
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	As per applicable clause
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	As per applicable clause
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	As per applicable clause
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	As per applicable clause
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	As per applicable clause
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	1000	As per applicable clause
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	1000	As per applicable clause
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	1000	As per applicable clause
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	1000	As per applicable clause
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	1000	As per applicable clause
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	1000	As per applicable clause
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	As per applicable clause
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	As per applicable clause
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	As per applicable clause
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	1000	As per applicable clause
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	1000	As per applicable clause
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	1000	As per applicable clause
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1000	As per applicable clause
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	1000	As per applicable clause
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1000	As per applicable clause
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1000	As per applicable clause
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	As per applicable clause
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	As per applicable clause
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	1000	As per applicable clause
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	1000	As per applicable clause
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	1000	As per applicable clause
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	1000	As per applicable clause
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	As per applicable clause
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	As per applicable clause
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	1000	As per applicable clause
7.101(Marking : Indifiction of water inlet and water outlet )	-	1000	As per applicable clause
7.14(Marking : Legibility and durability)	-	1000	As per applicable clause
7.13(Marking : Official language of Instruction )	-	1000	As per applicable clause
7.11(Marking : Indication of controls )	-	1000	As per applicable clause
7.8(Marking : Terminals )	-	1000	As per applicable clause
7.6(Marking : Symbol used )	-	1000	As per applicable clause
7.1(Marking : Warning for Open- outlet )	-	1000	As per applicable clause
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	1000	As per applicable clause
7.1(Marking : Statement for a pressure-relief device)	-	1000	As per applicable clause
7.1(Marking : Rated capacity)	-	1000	As per applicable clause
7.1(Marking : Rated pressure)	-	1000	As per applicable clause
7.1(Marking : Country of manufacture)	-	1000	As per applicable clause
7.1(Marking: IP Number)	-	1000	As per applicable clause
7.1(Marking: Symbol for Class II)	-	1000	As per applicable clause
7.1(Marking: Model or type reference)	-	1000	As per applicable clause
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	1000	As per applicable clause
7.1(Marking : Rated power input)	-	1000	As per applicable clause
7.1(Marking : Symbol for nature of supply )	-	1000	As per applicable clause
7.1(Marking : Rated Voltage )	-	1000	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

11745 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	500	As per applicable clause
7(Design)	-	500	As per applicable clause
8(a) Upper Leather)	-	500	As per applicable clause
8(b) Lining Leather)	-	500	As per applicable clause
8(c) Bottom Material)	-	500	As per applicable clause
8(d) Steel Toe Cap)	-	500	As per applicable clause
8(e) Tape)	-	500	As per applicable clause
8(f) Bottom Filling)	-	500	As per applicable clause
8(g) Eyelet)	-	500	As per applicable clause
8(h) Toe Compound)	-	500	As per applicable clause
8(i) Threads)	-	500	As per applicable clause
8(j) Rivets)	-	500	As per applicable clause
8(k) Screw Wire)	-	500	As per applicable clause
8(l) Heel Pin)	-	500	As per applicable clause
8(m) Shank)	-	500	As per applicable clause
8(n) Laces)	-	500	As per applicable clause
8(o) Tongue Lining)	-	500	As per applicable clause
8(p) Adhesive)	-	500	As per applicable clause
8(q) Strengthening Piece)	-	500	As per applicable clause
8(r) Leather Components)	-	500	As per applicable clause
9(Manufacture)	-	500	As per applicable clause
10(Finish)	-	500	As per applicable clause
11(a) Boots with Leather Sole and Heel)	-	500	As per applicable clause
11(b) Boots with Rubber Sole and Heel)	-	500	As per applicable clause
12(Performance Test)	-	500	As per applicable clause
13(Design)	-	500	As per applicable clause
14(a) Upper Leather)	-	500	As per applicable clause
14(b) Lining Leather)	-	500	As per applicable clause
14(c) Bottom Material)	-	500	As per applicable clause
14(d) Steel Toe Cap)	-	500	As per applicable clause
14(e) Tape)	-	500	As per applicable clause
14(f) Bottom Filling)	-	500	As per applicable clause
14(g) Eyelet)	-	500	As per applicable clause
14(h) Toe Compound)	-	500	As per applicable clause
14(i) Threads)	-	500	As per applicable clause
14(j) Rivets)	-	500	As per applicable clause
14(k) Screw Wire)	-	500	As per applicable clause
14(l) Heel Pin)	-	500	As per applicable clause
14(m) Shank)	-	500	As per applicable clause
14(n) Laces)	-	500	As per applicable clause
14(o) Tongue Lining)	-	500	As per applicable clause
14(p) Adhesive)	-	500	As per applicable clause
14(q) Leather Components)	-	500	As per applicable clause
15(Manufacture)	-	500	As per applicable clause
16(Finish)	-	500	As per applicable clause
17(a) Shoes with Leather Sole and Heel)	-	500	As per applicable clause
17(b) Shoes with Rubber Sole and Heel)	-	500	As per applicable clause
18(Performance Test)	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

11745 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 (a)(Marking)	-	500	As per Applicable
4.1 (b)(Marking)	-	500	As per applicable
4.1 (c)(Marking)	-	500	As per applicable
4.1 (d)(Marking)	-	500	As per applicable
4.1 (e)(Marking)	-	500	As per applicable
7.1(Design)	-	500	As per applicable
10.1(Finish)	-	500	As per applicable
10.3(Finish)	-	500	As per applicable
10.4(Finish)	-	500	As per applicable
11.1(Mass Boots with Leather Sole and Heel)	-	500	As per applicable
11.2(Mass Boots with Rubber Sole and Heel)	-	500	As per applicable
12(Performance test)	-	500	As per applicable
13(Design)	-	500	As per applicable
16.1(Finish)	-	500	As per applicable
16.2(Finish)	-	500	As per applicable
16.3(Finish)	-	500	As per applicable
16.4(Finish)	-	500	As per applicable
17.1(Mass Shoes with Leather Sole and Heel)	-	500	As per applicable
17.2(Mass Shoes with Rubber Sole and Heel)	-	500	As per applicable
18(Performance test)	-	500	As per applicable

Complete

28 Oct, 2023

-
-

IS 15644 (2006)

Safety of electric toys

Safety of Electric Toys

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	500	As per Applicable Clause
8.0(Power Input)	-	500	As per Applicable Clause
9.0(Heating and abnormal operation)	-	500	As per Applicable Clause
10.0(Electrical strength at operating temperature)	-	500	As per Applicable Clause
11.1(Moisture resistance)	-	500	As per Applicable Clause
11.2(Resistant to humidity)	-	500	As per Applicable Clause
12.0(Electric strength at room temperature)	-	500	As per Applicable Clause
13.0(Mechanical strength)	-	500	As per Applicable Clause
14.1(Construction)	-	500	As per Applicable Clause
14.2(Construction)	-	500	As per Applicable Clause
14.3(Construction)	-	500	As per Applicable Clause
14.4(Construction)	-	500	As per Applicable Clause
14.5(Construction)	-	500	As per Applicable Clause
14.6(Construction)	-	500	As per Applicable Clause
14.7(Construction)	-	500	As per Applicable Clause
14.8(Construction)	-	500	As per Applicable Clause
14.9(Construction)	-	500	As per Applicable Clause
14.1(Construction)	-	500	As per Applicable Clause
14.11(Construction)	-	500	As per Applicable Clause
14.12(Construction)	-	500	As per Applicable Clause
14.13(Construction)	-	500	As per Applicable Clause
14.14(Construction)	-	500	As per Applicable Clause
15.1(Protection of cords and wires)	-	500	As per Applicable Clause
15.2(Protection of cords and wires)	-	500	As per Applicable Clause
17 Table-1(Screws and connections)	-	500	As per Applicable Clause
17 Table-1(Nominal daimeter of screws made of insulating material)	-	500	As per Applicable Clause
18.0(Clearance and creepage distance)	-	500	As per Applicable Clause
19.1(Ball pressure test IEC 60695-10-2)	-	500	As per Applicable Clause
19.2.1(Glow wire test IEC 60695-2-11)	-	500	As per Applicable Clause
19.2.2(Needle flame test)	-	500	As per Applicable Clause
16.0(Components)	-	500	As per Applicable Clause
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
9873 (Part-7) 4.10(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	2400	-
9873 (Part-7) 4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	2400	-
9873 (Part-7) 4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	2400	-
9873 (Part-7) 4.7(pH value - ISO 787-9)	-	2400	-
9873 (Part-7) 4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	2400	-
9873 (Part-7) 4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	2400	-
9873 (Part-7) 4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	2400	-
9873 (Part-7) 4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	2400	-
9873 (Part-7) 4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	2400	-
9873 (Part-7) 4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	2400	-
9873 (Part-7) 4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 43(Preservatives - Benzenemethanaminium, N,Ndimethyl-N-[2-[2-[4-(1,1,3,3,- tetramethylbutyl)phenoxy] ethoxy] ethyl]-, chloride (Benzethonium Chloride)- EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 42(Preservatives - Sodium N-hydroxymethyl-glycinate - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 41(Preservatives - 3-(p-Chlorophenoxy)-propane-1,2 diol (Chlorphenesin) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 40(Preservatives - Pentane-1,5-dial (Glutaraldehyde, Glutaral) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 39(Preservatives -Benzenecarboximidamide, 4,4’-(1,6-hexanediyl-bis-(oxy))-bis-(3-nitrobenzamidine) and its salts (including isethionate and phydroxybenzoate): hexamidine, hexamidine diisethionate, hexamidine paraben - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 38(Preservatives - N-(Hydroxymethyl)-N-(dihydroxymethyl-1,3-dioxo-2,5-imidazolidinyl-4)-N’-(hydroxymethyl) urea (Diazolidinyl Urea) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 37(Preservatives - 4,4-Dimethyl-1,3-oxazolidine - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 36(Preservatives - Alkyl (C 12–22) trimethyl ammonium bromide and chloride: Behentrimonium chloride, cetrimonium bromide, cetrimonium chloride, laurtrimonium bromide, laurtrimonium chloride, steartrimonium bromide, steartrimonium chloride - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 35(Preservatives - N,N″-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13-tetraazatetradecanediamidine and its digluconate, diacetate and dihydrochloride: Chlorhexidine, Chlorhexidine Diacetate, Chlorhexidine Digluconate Chlorhexidine Dihydrochloride (as chlorhexidine) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 34(Preservatives - 2-Chloroacetamide - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 33(Preservatives - 2-Benzyl-4-chlorophenol (Chlorophene) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one (MIT) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 31(Preservatives - Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one with magnesium chloride and magnesium nitrate (of a mixture in the ratio 3:1 of 5-chloro-2-methylisothiazol 3(2H)-one and 2-methylisothiazol-3 (2H)-one) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 30(Preservatives - 4-Isopropyl-m-cresol (o-Cymen-5-ol) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 29(Preservatives - 2,2’-methylenebis(6-bromo-4-chlorophenol) (Bromochlorophene) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 28(Preservatives - 1-Hydroxy-4-methyl-6-(2,4,4- trimethylpentyl) 2-pyridon and its monoethanolamine salt (Piroctone Olamine) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 27(Preservatives - 1,3-Bis (hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione (DMDM Hydantoin) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 26(Preservatives -1-(4-Chlorophenoxy)-1-(imidazol-1-yl)-3,3-dimethylbutan-2-one (Climbazole) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 25(Preservatives - Methenamine-3-chloro-allylochloride (Quaternium-15) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 24(Preservatives - Methenamine - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 23(Preservatives - 2-Phenoxyethanol - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 22(Preservatives -Poly(methylene),.alpha.,.omega.-bis[[[(aminoiminomethyl) amino]iminomethyl] amino]-, dihydrochloride (Polyaminopropyl biguanide) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 21(Preservatives -N,N″-methylenebis[N′-[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]urea] (Imidazolidinyl urea) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 20(Preservatives - Chloroxylenol - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 18(Preservatives - 1-(4-Chlorophenyl)-3-(3,4-dichlorophenyl) urea (Triclocarban) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 17(Preservatives - 2,4-Dichlorobenzyl alcohol - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 16(Preservatives - 2-Bromo-2-nitropropane-1,3-diol (Bronopol) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 13(Preservatives - 3,3’-Dibromo-4,4’-hexamethylenedioxydi-benzamidine and its salts (including isethionate) (Dibromohexamidine isethionate) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 12(Preservatives - Formic acid, sodium formate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 11(Preservatives - 3-Acetyl-6-methylpyran-2,4 (3H)-dione and its salts: Dehydroacetic acid, sodium dehydroacetate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 10(Preservatives -4-Hydroxybenzoic acid, methylparaben, potassium ethylparaben, potassium paraben, sodium methylparaben, sodium ethylparaben, ethylparaben, sodium paraben, potassium methylparaben, calcium paraben, phenylparaben (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 9(Preservatives - Chlorobutanol - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 8(Preservatives - Inorganic sulfites and hydrogen-sulfites: Sodium sulfite, ammonium bisulfite, ammonium sulfite, potassium sulfite, potassium, hydrogen sulfite, sodium bisulfite, sodium metabisulfite, potassium metabisulfite (as free SO2) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 7(Preservatives - Pyrithione zinc - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation)	-	2400	-
4.3 - Annex - D- Table D.1 - Ref 5(Preservatives - Paraformaldehyde (free-formaldehyde)- EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 4(Preservatives - Hexa-2,4-dienoic acid and its salts: Sorbic acid, calcium sorbate, sodium sorbate potassium sorbate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 3(Preservatives - Propionic acid,, ammonium propionate, calcium propionate, magnesium propionate, potassium propionate, sodium propionate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.3 - Annex - D- Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part-7) 4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	2400	-
9873 (Part-7) 4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	2400	-
9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	300	-
9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	300	-
9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	300	-
9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	300	-
9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	300	-
9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	300	-
9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	300	-
9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	300	-

Complete

28 Oct, 2023

-
-

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

Safety of Toys Phthalates

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-

Complete

28 Oct, 2023

-
-

IS 9873 : Part 7 (2017)

Safety of toys: Part 7 requirements and test methods for finger paints

Finger Paints

12000 View breakup
Rs.18000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	2400	As per applicable clause
4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	2400	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 3(Preservatives - Propionic acid,, ammonium propionate, calcium propionate, magnesium propionate, potassium propionate, sodium propionate (as acid) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 4(Preservatives - Hexa-2,4-dienoic acid and its salts: Sorbic acid, calcium sorbate, sodium sorbate potassium sorbate (as acid) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 5(Preservatives - Paraformaldehyde (free-formaldehyde)- EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 7(Preservatives - Pyrithione zinc - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 8(Preservatives - Inorganic sulfites and hydrogen-sulfites: Sodium sulfite, ammonium bisulfite, ammonium sulfite, potassium sulfite, potassium, hydrogen sulfite, sodium bisulfite, sodium metabisulfite, potassium metabisulfite (as free SO2) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 9(Preservatives - Chlorobutanol - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 10(Preservatives -4-Hydroxybenzoic acid, methylparaben, potassium ethylparaben, potassium paraben, sodium methylparaben, sodium ethylparaben, ethylparaben, sodium paraben, potassium methylparaben, calcium paraben, phenylparaben (as acid) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 11(Preservatives - 3-Acetyl-6-methylpyran-2,4 (3H)-dione and its salts: Dehydroacetic acid, sodium dehydroacetate (as acid) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 12(Preservatives - Formic acid, sodium formate (as acid) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 13(Preservatives - 3,3’-Dibromo-4,4’-hexamethylenedioxydi-benzamidine and its salts (including isethionate) (Dibromohexamidine isethionate) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 14(Preservatives - Undec-10- enoic acid and its salts: Undecylenic acid, potassium undecylenate, sodium undecylenate, calcium undecylenate, TEA-undecylenate, MEA-undecylenate (as acid) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 15(Preservatives - 5- Pyrimidinamine, 1,3- bis (2-ethylhexyl)-5- methylhexahydropyrimidin-5-amine (Hexetidine) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 16(Preservatives - 2-Bromo-2-nitropropane-1,3-diol (Bronopol) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 17(Preservatives - 2,4-Dichlorobenzyl alcohol - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 18(Preservatives - 1-(4-Chlorophenyl)-3-(3,4-dichlorophenyl) urea (Triclocarban) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 20(Preservatives - Chloroxylenol - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 21(Preservatives -N,N″-methylenebis[N′-[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]urea] (Imidazolidinyl urea) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 22(Preservatives -Poly(methylene),.alpha.,.omega.-bis[[[(aminoiminomethyl) amino]iminomethyl] amino]-, dihydrochloride (Polyaminopropyl biguanide) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 23(Preservatives - 2-Phenoxyethanol - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 24(Preservatives - Methenamine - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 25(Preservatives - Methenamine-3-chloro-allylochloride (Quaternium-15) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 26(Preservatives -1-(4-Chlorophenoxy)-1-(imidazol-1-yl)-3,3-dimethylbutan-2-one (Climbazole) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 27(Preservatives - 1,3-Bis (hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione (DMDM Hydantoin) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 28(Preservatives - 1-Hydroxy-4-methyl-6-(2,4,4- trimethylpentyl) 2-pyridon and its monoethanolamine salt (Piroctone Olamine) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 29(Preservatives - 2,2’-methylenebis(6-bromo-4-chlorophenol) (Bromochlorophene) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 30(Preservatives - 4-Isopropyl-m-cresol (o-Cymen-5-ol) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 31(Preservatives - Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one with magnesium chloride and magnesium nitrate (of a mixture in the ratio 3:1 of 5-chloro-2-methylisothiazol 3(2H)-one and 2-methylisothiazol-3 (2H)-one) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one (MIT) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 33(Preservatives - 2-Benzyl-4-chlorophenol (Chlorophene) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 34(Preservatives - 2-Chloroacetamide - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 35(Preservatives - N,N″-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13-tetraazatetradecanediamidine and its digluconate, diacetate and dihydrochloride: Chlorhexidine, Chlorhexidine Diacetate, Chlorhexidine Digluconate Chlorhexidine Dihydrochloride (as chlorhexidine) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 36(Preservatives - Alkyl (C 12–22) trimethyl ammonium bromide and chloride: Behentrimonium chloride, cetrimonium bromide, cetrimonium chloride, laurtrimonium bromide, laurtrimonium chloride, steartrimonium bromide, steartrimonium chloride - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 37(Preservatives - 4,4-Dimethyl-1,3-oxazolidine - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 38(Preservatives - N-(Hydroxymethyl)-N-(dihydroxymethyl-1,3-dioxo-2,5-imidazolidinyl-4)-N’-(hydroxymethyl) urea (Diazolidinyl Urea) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 39(Preservatives -Benzenecarboximidamide, 4,4’-(1,6-hexanediyl-bis-(oxy))-bis-(3-nitrobenzamidine) and its salts (including isethionate and phydroxybenzoate): hexamidine, hexamidine diisethionate, hexamidine paraben - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 40(Preservatives - Pentane-1,5-dial (Glutaraldehyde, Glutaral) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 41(Preservatives - 3-(p-Chlorophenoxy)-propane-1,2 diol (Chlorphenesin) - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 42(Preservatives - Sodium N-hydroxymethyl-glycinate - EU Cosmetics Legislation)	-	500	As per applicable clause
4.3 - Annex - D- Table D.1 - Ref 43(Preservatives - Benzenemethanaminium, N,Ndimethyl-N-[2-[2-[4-(1,1,3,3,- tetramethylbutyl)phenoxy] ethoxy] ethyl]-, chloride (Benzethonium Chloride)- EU Cosmetics Legislation)	-	500	As per applicable clause
4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	500	As per applicable clause
4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	500	As per applicable clause
4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	500	As per applicable clause
4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	1000	As per applicable clause
4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	1000	As per applicable clause
4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	500	As per applicable clause
4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	500	As per applicable clause
4.7(pH value - ISO 787-9)	-	500	As per applicable clause
4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	500	As per applicable clause
4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	1500	As per applicable clause
4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 9873 : Part 4 (2017)

Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use

Safety of Toys Part 4

15000 View breakup
Rs.15000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 and 6.2.1( Strength of toys other than swings)	-	500	-
4.1.2 and A.4.1.2(Maximum height)	-	500	-
4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	500	-
4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	500	-
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	500	-
4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	500	-
4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	500	-
4.1.4.4 and 6.7.2 (Motion rides)	-	500	-
4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	500	-
4.1.4.5 (Slides)	-	500	-
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	-
4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	500	-
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	500	-
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	500	-
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	500	-
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	500	-
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	500	-
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	500	-
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	500	-
4.3(Rung ladders, stepladders and stairways)	-	500	-
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	500	-
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	500	-
4.3 c(The surface of the tread shall not be slippery)	-	500	-
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	500	-
4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	500	-
4.3 f(The inclination of stairways)	-	500	-
4.3 f(The inclination of stepladders)	-	500	-
4.3 f(The inclination of rung ladders)	-	500	-
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	500	-
4.3 g(A means of continuous hand support from a height of 760 mm)	-	500	-
4.4.1 (Head and neck entrapment)	-	500	-
4.4.2(Entrapment of clothing and hair)	-	500	-
4.4.3(Entrapment of feet)	-	500	-
4.4.4(Entrapment of fingers)	-	500	-
4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	500	-
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	500	-
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	500	-
4.6.1 and A.4.6.(Stability of slides)	-	500	-
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	500	-
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	500	-
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	-
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	-
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	500	-
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	500	-
4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	-
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	500	-
4.6.4 and A.4.6.(Roller slides)	-	500	-
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	-
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	500	-
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	500	-
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	500	-
4.7.3.1(Swings intended for children under 36 months)	-	500	-
4.7.3.2(Toddler swings without a crossbeam)	-	500	-
4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	500	-
4.7.4(Impact from swing elements - Average surface compression)	-	500	-
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	500	-
4.7.5(Elements excluding free swinging)	-	500	-
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	500	-
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	-
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	500	-
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	500	-
4.7.8 d and A.4.7.8(Straps and chains - Width)	-	500	-
4.7.8 d and A.4.7.8(Accessible chains)	-	500	-
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	-
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	-
4.8(Seesaws )	-	500	-
4.9(Carousels and rocking toys)	-	500	-
4.9(Free height of fall for carousels and rocking toys)	-	500	-
4.10.1 and A.4.10(Inflatable activity toys - General)	-	500	-
4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	-
4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	500	-
4.10.4.1 and A.4.10(Containment - General)	-	500	-
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing)	-	500	-
4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	500	-
4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	500	-
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	500	-
4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	500	-
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	500	-
4.10.4.4 and A.4.10(Safe collapse)	-	500	-
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	500	-
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	500	-
4.11.1(Paddling pools - General)	-	500	-
4.11.2(Edges, points, and small parts)	-	500	-
4.11.3(Paddling pools with inflatable walls)	-	500	-
5.1(Labelling)	-	500	-
5.2(Assembly and installation instructions)	-	500	-
5.3(Maintenance instructions)	-	500	-
5.4(Warnings)	-	500	-

Complete

28 Oct, 2023

-
-

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-
4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	300	-

Complete

28 Oct, 2023

-
-

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

1500 View breakup
Rs.1500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	-
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1500	-
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1500	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	-
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1500	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1500	-
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	1500	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	1500	-
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1500	-
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1500	-
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1500	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1500	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1500	-
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	-
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	-
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1500	-
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	1500	-

Complete

28 Oct, 2023

-
-

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

3000 View breakup
Rs.3000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	500	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	500	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	500	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	500	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	500	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	500	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	500	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	500	-
4.3.2 - 5.21( Expanding materials)	-	500	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	500	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	500	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	500	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	500	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	500	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	500	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	500	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	500	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	500	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	500	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	500	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	500	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	500	-
4.6.2(Edges-Functional sharp edges)	-	500	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	-
4.6.4( Edges-Edges on moulded toys)	-	500	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	500	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	-
4.7.2 - a(Points-Functional sharp points)	-	500	-
4.7.2 - b(Points-Functional sharp points)	-	500	-
4.7.3 (Wooden toys)	-	500	-
4.8.1(Projections-General requirments)	-	500	-
4.8.1(Projections-General requirments)	-	500	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	500	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	500	-
4.9 - c( Metal wires and rods)	-	500	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	500	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	-
4.9 - c( Metal wires and rods-Spokes ends)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	500	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	500	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	500	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	500	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	500	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	500	-
4.11.6(Cords- Electrical cables)	-	500	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	500	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	500	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	500	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	500	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	500	-
4.11.10(Cords-Cords on toy bags)	-	500	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	500	-
4.11.11( Cords, strings and lines for flying toys- )	-	500	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
4.14(a)(Springs)	-	500	-
4.14(b)(Springs)	-	500	-
4.14(c)(Springs)	-	500	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
4.18.2(b)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles)	-	500	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	500	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	500	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	500	-
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	500	-
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	500	-
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	500	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.2(Aquatic toys)	-	500	-
4.21(a)(Braking)	-	500	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	-
4.21(b)(braking)	-	500	-
4.22.1(Toy bicycles-Instructions for use)	-	500	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	500	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	500	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	500	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	500	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	500	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	500	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	500	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	-
4.25(Liquid-filled toys)	-	500	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28( Percussion caps specifically designed for use in toys)	-	500	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	500	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	500	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	500	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	500	-
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	500	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	500	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	500	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	500	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	-
4.30.6 ( Toy scooters-Braking)	-	500	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	500	-
4.30.7( Toy scooters-Wheel size(diameter))	-	500	-
4.30.8(Toy scooters-Projections)	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	500	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	500	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	500	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	500	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	500	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	1500	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	1500	-
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	-
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	1500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	1500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1500	-
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	500	-
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	-
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	500	-
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	500	-
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500	-
9873 (Part - 1) 4.2.2(b) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	500	-
9873 (Part - 1) 4.2.2(a) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	500	-
9873 (Part - 1) 4.2.2 - 5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	500	-
9873 (Part - 1) 4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
9873 (Part - 1) 4.34(Sledges and toboggans with cords for pulling)	-	500	-
9873 (Part - 1) 4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	500	-
9873 (Part - 1) 4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	500	-
9873 (Part - 1) 4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	500	-
9873 (Part - 1) 4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
9873 (Part - 1) 4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
9873 (Part - 1) 4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	500	-
9873 (Part - 1) 4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	500	-
9873 (Part - 1) 4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
9873 (Part - 1) 4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	500	-
9873 (Part - 1) 4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	500	-
9873 (Part - 1) 4.30.8(Toy scooters-Projections)	-	500	-
9873 (Part - 1) 4.30.7( Toy scooters-Wheel size(diameter))	-	500	-
9873 (Part - 1) 4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	500	-
9873 (Part - 1) 4.30.6 ( Toy scooters-Braking)	-	500	-
9873 (Part - 1) 4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	-
9873 (Part - 1) 4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
9873 (Part - 1) 4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
9873 (Part - 1) 4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
9873 (Part - 1) 4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
9873 (Part - 1) 4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
9873 (Part - 1) 4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	500	-
9873 (Part - 1) 4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	500	-
9873 (Part - 1) 4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	500	-
9873 (Part - 1) 4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	500	-
9873 (Part - 1) 4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	500	-
9873 (Part - 1) 4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	500	-
9873 (Part - 1) 4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	500	-
9873 (Part - 1) 4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	500	-
9873 (Part - 1) 4.30.2(Toy scooters-Warnings and instructions for use)	-	500	-
9873 (Part - 1) 4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
9873 (Part - 1) 4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
9873 (Part - 1) 4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
9873 (Part - 1) 4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
9873 (Part - 1) 4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
9873 (Part - 1) 4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
9873 (Part - 1) 4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	500	-
9873 (Part - 1) 4.28( Percussion caps specifically designed for use in toys)	-	500	-
9873 (Part - 1) 4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
9873 (Part - 1) 4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	-
9873 (Part - 1) 4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	-
9873 (Part - 1) 4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	-
9873 (Part - 1) 4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
9873 (Part - 1) 4.25(Liquid-filled toys)	-	500	-
9873 (Part - 1) 4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	-
9873 (Part - 1) 4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	500	-
9873 (Part - 1) 4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	500	-
9873 (Part - 1) 4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	500	-
9873 (Part - 1) 4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	-
9873 (Part - 1) 4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	-
9873 (Part - 1) 4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	-
9873 (Part - 1) 4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	500	-
9873 (Part - 1) 4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	500	-
9873 (Part - 1) 4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	-
9873 (Part - 1) 4.22.2(Toy bicycles-Determination of maximum saddle height)	-	500	-
9873 (Part - 1) 4.22.1(Toy bicycles-Instructions for use)	-	500	-
9873 (Part - 1) 4.21(b)(braking)	-	500	-
9873 (Part - 1) 4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	-
9873 (Part - 1) 4.2(Aquatic toys)	-	500	-
9873 (Part - 1) 4.19(Rotors and propellers)	-	500	-
9873 (Part - 1) 4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	500	-
9873 (Part - 1) 4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	500	-
9873 (Part - 1) 4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	500	-
9873 (Part - 1) 4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	500	-
9873 (Part - 1) 4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
9873 (Part - 1) 4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	500	-
9873 (Part - 1) 4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	500	-
9873 (Part - 1) 4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	500	-
9873 (Part - 1) 4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
9873 (Part - 1) 4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	-
9873 (Part - 1) 4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	500	-
9873 (Part - 1) 4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	-
9873 (Part - 1) 4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	-
9873 (Part - 1) 4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	-
9873 (Part - 1) 4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	500	-
9873 (Part - 1) 4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	500	-
9873 (Part - 1) 4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	-
9873 (Part - 1) 4.18.2(c)(Projectile toys-Projectiles-Radius)	-	500	-
9873 (Part - 1) 4.18.2(c)(Projectile toys-Projectiles)	-	500	-
9873 (Part - 1) 4.18.2(b)(Projectile toys-Projectiles)	-	500	-
9873 (Part - 1) 4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
9873 (Part - 1) 4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	-
9873 (Part - 1) 4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	-
9873 (Part - 1) 4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	500	-
9873 (Part - 1) 4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	500	-
9873 (Part - 1) 4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	500	-
9873 (Part - 1) 4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	500	-
9873 (Part - 1) 4.16.3(Enclosures-Toys that enclose the head)	-	500	-
9873 (Part - 1) 4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	500	-
9873 (Part - 1) 4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	500	-
9873 (Part - 1) 4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	500	-
9873 (Part - 1) 4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	500	-
9873 (Part - 1) 4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	500	-
9873 (Part - 1) 4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	-
9873 (Part - 1) 4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	500	-
9873 (Part - 1) 4.16.1(Enclosures-Ventilation)	-	500	-
9873 (Part - 1) 4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	-
9873 (Part - 1) 4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	-
9873 (Part - 1) 4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
9873 (Part - 1) 4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
9873 (Part - 1) 4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
9873 (Part - 1) 4.16.1(Enclosures-Ventilation)	-	500	-
9873 (Part - 1) 4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	-
9873 (Part - 1) 4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
9873 (Part - 1) 4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	-
9873 (Part - 1) 4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	-
9873 (Part - 1) 4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	-
9873 (Part - 1) 4.14(c)(Springs)	-	500	-
9873 (Part - 1) 4.14(b)(Springs)	-	500	-
9873 (Part - 1) 4.14(a)(Springs)	-	500	-
9873 (Part - 1) 4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
9873 (Part - 1) 4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
9873 (Part - 1) 4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
9873 (Part - 1) 4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	-
9873 (Part - 1) 4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
9873 (Part - 1) 4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
9873 (Part - 1) 4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
9873 (Part - 1) 4.12.3(Folding mechanisms-Hinge line clearance)	-	500	-
9873 (Part - 1) 4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
9873 (Part - 1) 4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
9873 (Part - 1) 4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	500	-
9873 (Part - 1) 4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
9873 (Part - 1) 4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	-
9873 (Part - 1) 4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	500	-
9873 (Part - 1) 4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	-
9873 (Part - 1) 4.9 - c( Metal wires and rods-Spokes ends)	-	500	-
9873 (Part - 1) 4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	-
9873 (Part - 1) 4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	-
9873 (Part - 1) 4.8.1(Projections-General requirments)	-	500	-
9873 (Part - 1) 4.7.3 (Wooden toys)	-	500	-
9873 (Part - 1) 4.7.2 - b(Points-Functional sharp points)	-	500	-
9873 (Part - 1) 4.7.2 - a(Points-Functional sharp points)	-	500	-
9873 (Part - 1) 4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	-
9873 (Part - 1) 4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	500	-
9873 (Part - 1) 4.6.4( Edges-Edges on moulded toys)	-	500	-
9873 (Part - 1) 4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	-
9873 (Part - 1) 4.5.7(Shape, size and strength of certain toys-Marbles)	-	500	-
9873 (Part - 1) 4.5.6(Shape, size and strength of certain toys-Balloons)	-	500	-
9873 (Part - 1) 4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	500	-
9873 (Part - 1) 4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	500	-
9873 (Part - 1) 4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	500	-
9873 (Part - 1) 4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	-
9873 (Part - 1) 4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	500	-
9873 (Part - 1) 4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	-
9873 (Part - 1) 4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	-
9873 (Part - 1) 4.3.2 - 5.21( Expanding materials)	-	500	-
9873 (Part - 1) 4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	500	-
9873 (Part - 1) 4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	500	-
9873 (Part - 1) 4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	-
9873 (Part - 1) 4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	500	-
9873 (Part - 1) 4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	500	-
9873 (Part - 1) 4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	500	-
9873 (Part - 1) 4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	500	-
9873 (Part - 1) 4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	500	-
9873 (Part - 1) 4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
9873 (Part - 1) 4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	-
9873 (Part - 1) 4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	500	-
9874 (Part - 4) 5.4(Warnings)	-	500	-
9874 (Part - 4) 5.3(Maintenance instructions)	-	500	-
9874 (Part - 4) 5.2(Assembly and installation instructions)	-	500	-
9874 (Part - 4) 5.1(Labelling)	-	500	-
9874 (Part - 4) 4.11.3(Paddling pools with inflatable walls)	-	500	-
9874 (Part - 4) 4.11.2(Edges, points, and small parts)	-	500	-
9874 (Part - 4) 4.11.1(Paddling pools - General)	-	500	-
9874 (Part - 4) 4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.)	-	500	-
9874 (Part - 4) 4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point )	-	500	-
9874 (Part - 4) 4.10.4.4 and A.4.10(Safe collapse)	-	500	-
9874 (Part - 4) 4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.)	-	500	-
9874 (Part - 4) 4.10.4.3 and A.4.10(The first metre at the top of slopes)	-	500	-
9874 (Part - 4) 4.10.4.3 and A.4.10(Slopes shall be treated as a platform.)	-	500	-
9874 (Part - 4) 4.10.4.2 and A.4.10(Permanently roofed Containment walls)	-	500	-
9874 (Part - 4) 4.10.4.2 and A.4.10(Containment walls with a minimum height )	-	500	-
9874 (Part - 4) 4.10.4.1 and A.4.10(Containment - General)	-	500	-
9874 (Part - 4) 4.10.3 and A.4.10(Connection tubes for continuous inflation)	-	500	-
9874 (Part - 4) 4.10.2 and A.4.10(Inflatable activity toys - Anchorage)	-	500	-
9874 (Part - 4) 4.10.1 and A.4.10(Inflatable activity toys - General)	-	500	-
9874 (Part - 4) 4.9(Free height of fall for carousels and rocking toys)	-	500	-
9874 (Part - 4) 4.9(Carousels and rocking toys)	-	500	-
9874 (Part - 4) 4.8(Seesaws )	-	500	-
9874 (Part - 4) 4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal)	-	500	-
9874 (Part - 4) 4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height)	-	500	-
9874 (Part - 4) 4.7.8 f and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
9874 (Part - 4) 4.7.8 e and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
9874 (Part - 4) 4.7.8 d and A.4.7.8(Accessible chains)	-	500	-
9874 (Part - 4) 4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter )	-	500	-
9874 (Part - 4) 4.7.8 b and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
9874 (Part - 4) 4.7.8 a and A.4.7.8(Suspension connectors and means of suspension)	-	500	-
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements)	-	500	-
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less)	-	500	-
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	-
9874 (Part - 4) 4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm)	-	500	-
9874 (Part - 4) 4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam)	-	500	-
9874 (Part - 4) 4.7.5(Elements excluding free swinging)	-	500	-
9874 (Part - 4) 4.7.5(Free swinging elements)	-	500	-
9874 (Part - 4) 4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures)	-	500	-
9874 (Part - 4) 4.7.4(Impact from swing elements - Average surface compression)	-	500	-
9874 (Part - 4) 4.7.4(Impact from swing elements - swing elements shall not impart an average peak value of acceleration)	-	500	-
9874 (Part - 4) 4.7.3.2(Toddler swings without a crossbeam)	-	500	-
9874 (Part - 4) 4.7.3.1(Swings intended for children under 36 months)	-	500	-
9874 (Part - 4) 4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings)	-	500	-
9874 (Part - 4) 4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less above the ground)	-	500	-
9874 (Part - 4) 4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground)	-	500	-
9874 (Part - 4) 4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams)	-	500	-
9874 (Part - 4) 4.6.4 and A.4.6.(Roller slides)	-	500	-
9874 (Part - 4) 4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°)	-	500	-
9874 (Part - 4) 4.6.3 e and A.4.6.(The run-out section for the slide)	-	500	-
9874 (Part - 4) 4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section)	-	500	-
9874 (Part - 4) 4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides)	-	500	-
9874 (Part - 4) 4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have)	-	500	-
9874 (Part - 4) 4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have)	-	500	-
9874 (Part - 4) 4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.)	-	500	-
9873 (Part - 4) 4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more)	-	500	-
9873 (Part - 4) 4.6.1 and A.4.6.(Stability of slides)	-	500	-
9873 (Part - 4) 4.5.3(Stability of activity toys with a free height of fall of more than 600 mm)	-	500	-
9873 (Part - 4) 4.5.2(Stability of activity toys with a free height of fall of 600 mm or less)	-	500	-
9873 (Part - 4) 4.5.1(Stability of activity toys other than slides, swings and toys with crossbeams - General)	-	500	-
9873 (Part - 4) 4.4.4(Entrapment of fingers)	-	500	-
9873 (Part - 4) 4.4.3(Entrapment of feet)	-	500	-
9873 (Part - 4) 4.4.2(Entrapment of clothing and hair)	-	500	-
9873 (Part - 4) 4.4.1 (Head and neck entrapment)	-	500	-
9873 (Part - 4) 4.3 g(A means of continuous hand support from a height of 760 mm)	-	500	-
9873 (Part - 4) 4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm)	-	500	-
9873 (Part - 4) 4.3 f(The inclination of rung ladders)	-	500	-
9873 (Part - 4) 4.3.e(The depth of treads on stepladders with closed risers or stairways)	-	500	-
9873 (Part - 4) 4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders)	-	500	-
9873 (Part - 4) 4.3 c(The surface of the tread shall not be slippery)	-	500	-
9873 (Part - 4) 4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.)	-	500	-
9873 (Part - 4) 4.3 f(The inclination of stepladders)	-	500	-
9873 (Part - 4) 4.3 f(The inclination of stairways)	-	500	-
9873 (Part - 4) 4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more)	-	500	-
9873 (Part - 4) 4.3(Rung ladders, stepladders and stairways)	-	500	-
9873 (Part - 4) 4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails)	-	500	-
9873 (Part - 4) 4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design)	-	500	-
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1)	-	500	-
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.)	-	500	-
9873 (Part - 4) 4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground)	-	500	-
9873 (Part - 4) 4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground)	-	500	-
9873 (Part - 4) 4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground)	-	500	-
9873 (Part - 4) 4.1.6 (Open tubing IS 9873 -1 / ISO 8124-1.)	-	500	-
9873 (Part - 4) 4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables)	-	500	-
9873 (Part - 4) 4.1.4.5 (Slides)	-	500	-
9873 (Part - 4) 4.1.4.5 and 6.7.1.2 and Fig.9(Slides)	-	500	-
9873 (Part - 4) 4.1.4.4 and 6.7.2 (Motion rides)	-	500	-
9873 (Part - 4) 4.1.4.3 and 6.7.1 and Fig.8(Upright protrusions)	-	500	-
9873 (Part - 4) 4.1.4.2 and 6.7.1 and Fig.7(All protrusions)	-	500	-
9873 (Part - 4) 4.1.4.1 and 6.7.1 and Fig.6(Protruding parts)	-	500	-
9873 (Part - 4) 4.1.3 and A.4.1.3(Corners and edges other than moving parts)	-	500	-
9873 (Part - 4) 4.1.3 and A.4.1.3(Corners and edges on moving parts)	-	500	-
9873 (Part - 4) 4.1.2 and A.4.1.2(Maximum height)	-	500	-
9873 (Part - 4) 4.1.1 and 6.2.1( Strength of toys other than swings)	-	500	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	400	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	400	-
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	300	-
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	300	-
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	300	-
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	300	-
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	300	-
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	300	-
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	300	-
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	300	-
9873 (Part - 7) 4.10(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks)	-	2400	-
9873 (Part - 7) 4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8)	-	2400	-
9873 (Part - 7) 4.8(shall only use binding agents, extenders, humectants and surfactants which are not classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10))	-	2400	-
9873 (Part - 7) 4.7(pH value - ISO 787-9)	-	2400	-
9873 (Part - 7) 4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6)	-	2400	-
9873 (Part - 7) 4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C)	-	2400	-
9873 (Part - 7) 4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C)	-	2400	-
9873 (Part - 7) 4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C)	-	2400	-
9873 (Part - 7) 4.5.1.2 - Table 2(Total,carcinogenic primary aromatic amines - Annex C)	-	2400	-
9873 (Part - 7) 4.5.1.2 - Table 2(Individual carcinogenic primary aromatic amines - Annex C)	-	2400	-
9873 (Part - 7) 4.5.1.1 - Table 1(Primary aromatic amines - Annex C)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.4 (ref. Table 1 row 3 of ISO 8124 - 3 - 2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 43(Preservatives - Benzenemethanaminium, N,Ndimethyl-N-[2-[2-[4-(1,1,3,3,- tetramethylbutyl)phenoxy] ethoxy] ethyl]-, chloride (Benzethonium Chloride)- EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 42(Preservatives - Sodium N-hydroxymethyl-glycinate - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 41(Preservatives - 3-(p-Chlorophenoxy)-propane-1,2 diol (Chlorphenesin) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 40(Preservatives - Pentane-1,5-dial (Glutaraldehyde, Glutaral) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 39(Preservatives -Benzenecarboximidamide, 4,4’-(1,6-hexanediyl-bis-(oxy))-bis-(3-nitrobenzamidine) and its salts (including isethionate and phydroxybenzoate): hexamidine, hexamidine diisethionate, hexamidine paraben - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 38(Preservatives - N-(Hydroxymethyl)-N-(dihydroxymethyl-1,3-dioxo-2,5-imidazolidinyl-4)-N’-(hydroxymethyl) urea (Diazolidinyl Urea) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 37(Preservatives - 4,4-Dimethyl-1,3-oxazolidine - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 36(Preservatives - Alkyl (C 12–22) trimethyl ammonium bromide and chloride: Behentrimonium chloride, cetrimonium bromide, cetrimonium chloride, laurtrimonium bromide, laurtrimonium chloride, steartrimonium bromide, steartrimonium chloride - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 35(Preservatives - N,N″-bis(4-chlorophenyl)-3,12-diimino-2,4,11,13-tetraazatetradecanediamidine and its digluconate, diacetate and dihydrochloride: Chlorhexidine, Chlorhexidine Diacetate, Chlorhexidine Digluconate Chlorhexidine Dihydrochloride (as chlorhexidine) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 34(Preservatives - 2-Chloroacetamide - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 33(Preservatives - 2-Benzyl-4-chlorophenol (Chlorophene) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one (MIT) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 31(Preservatives - Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one with magnesium chloride and magnesium nitrate (of a mixture in the ratio 3:1 of 5-chloro-2-methylisothiazol 3(2H)-one and 2-methylisothiazol-3 (2H)-one) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 30(Preservatives - 4-Isopropyl-m-cresol (o-Cymen-5-ol) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 29(Preservatives - 2,2’-methylenebis(6-bromo-4-chlorophenol) (Bromochlorophene) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 28(Preservatives - 1-Hydroxy-4-methyl-6-(2,4,4- trimethylpentyl) 2-pyridon and its monoethanolamine salt (Piroctone Olamine) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 27(Preservatives - 1,3-Bis (hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione (DMDM Hydantoin) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 26(Preservatives -1-(4-Chlorophenoxy)-1-(imidazol-1-yl)-3,3-dimethylbutan-2-one (Climbazole) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 25(Preservatives - Methenamine-3-chloro-allylochloride (Quaternium-15) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 24(Preservatives - Methenamine - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 23(Preservatives - 2-Phenoxyethanol - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 22(Preservatives -Poly(methylene),.alpha.,.omega.-bis[[[(aminoiminomethyl) amino]iminomethyl] amino]-, dihydrochloride (Polyaminopropyl biguanide) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 21(Preservatives -N,N″-methylenebis[N′-[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]urea] (Imidazolidinyl urea) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 20(Preservatives - Chloroxylenol - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 18(Preservatives - 1-(4-Chlorophenyl)-3-(3,4-dichlorophenyl) urea (Triclocarban) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 17(Preservatives - 2,4-Dichlorobenzyl alcohol - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 16(Preservatives - 2-Bromo-2-nitropropane-1,3-diol (Bronopol) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 15(Preservatives - 5- Pyrimidinamine, 1,3- bis (2-ethylhexyl)-5- methylhexahydropyrimidin-5-amine (Hexetidine) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 14(Preservatives - Undec-10- enoic acid and its salts: Undecylenic acid, potassium undecylenate, sodium undecylenate, calcium undecylenate, TEA-undecylenate, MEA-undecylenate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 13(Preservatives - 3,3’-Dibromo-4,4’-hexamethylenedioxydi-benzamidine and its salts (including isethionate) (Dibromohexamidine isethionate) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 12(Preservatives - Formic acid, sodium formate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 11(Preservatives - 3-Acetyl-6-methylpyran-2,4 (3H)-dione and its salts: Dehydroacetic acid, sodium dehydroacetate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 10(Preservatives -4-Hydroxybenzoic acid, methylparaben, potassium ethylparaben, potassium paraben, sodium methylparaben, sodium ethylparaben, ethylparaben, sodium paraben, potassium methylparaben, calcium paraben, phenylparaben (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 9(Preservatives - Chlorobutanol - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 8(Preservatives - Inorganic sulfites and hydrogen-sulfites: Sodium sulfite, ammonium bisulfite, ammonium sulfite, potassium sulfite, potassium, hydrogen sulfite, sodium bisulfite, sodium metabisulfite, potassium metabisulfite (as free SO2) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 7(Preservatives - Pyrithione zinc - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation)	-	2400	-
4.3 - Annex - D - Table D.1 - Ref 5(Preservatives - Paraformaldehyde (free-formaldehyde)- EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 4(Preservatives - Hexa-2,4-dienoic acid and its salts: Sorbic acid, calcium sorbate, sodium sorbate potassium sorbate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 3(Preservatives - Propionic acid,, ammonium propionate, calcium propionate, magnesium propionate, potassium propionate, sodium propionate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 2(Preservatives - Ammonium benzoate calcium benzoate, potassium benzoate, magnesium benzoate, MEA-benzoate, methyl benzoate, ethyl benzoate, propyl benzoate, butyl benzoate, isobutyl benzoate, isopropyl benzoate, phenyl benzoate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.3 - Annex - D - Table D.1 - Ref 1(Preservatives - Benzoic acid, sodium benzoate (as acid) - EU Cosmetics Legislation)	-	2400	-
9873 (Part - 7) 4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C)	-	2400	-
9873 (Part - 7) 4.2.1 (Colourants used in finger paint shall not have any of the health hazard classifications set out in 4.1 (hazard class 3.1 to 3.10) - ISO 8124)	-	2400	-
5.24.6.1(Tension Test General procedure)	-	500	-
4.1(Normal use)	-	500	-
4.3.1(Material quality)	-	500	-

Complete

28 Oct, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

GEO CHEM LABORATORIES PVT.LTD.

Plot No-306, Udyog Vihar, Phase-2, Gurugram, Haryana, Gurugram, Gurugram, Haryana, 122016

9871590424 [email protected]

Scope List