BIS - LIMS (Laboratory Information Management System)

GEO CHEM LABORATORIES PVT.LTD.

Plot No-306, Udyog Vihar, Phase-2, Gurugram, Haryana, Gurugram, Gurugram, Haryana, 122016

9871590424 [email protected]

Scope List

Reset

48 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 302 : Part 2 : Sec 13 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 13 frying pans, deep fat fryers and similar appliances

43000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1500	As per Applicable Clauses
31(Resistance to Rusting)	-	1500	As per Applicable Clauses
30(Resistance to Heat, Fire and Tracking)	-	1500	As per Applicable Clauses
29(Clearances, Creepage Distances & Solid Insulation)	-	1500	As per Applicable Clauses
28(Screws & Connections)	-	1500	As per Applicable Clauses
27(Provision For Earthing)	-	1500	As per Applicable Clauses
26(Terminals For External Conductors)	-	1500	As per Applicable Clauses
25(Supply Connection & External Flexible Cables and Cords)	-	1500	As per Applicable Clauses
24(Components)	-	1500	As per Applicable Clauses
23(Internal wiring)	-	1500	As per Applicable Clauses
22(Construction)	-	1500	As per Applicable Clauses
21(Mechanical strength)	-	1500	As per Applicable Clauses
20(Stability & Mechanical Hazards)	-	1500	As per Applicable Clauses
19(Abnormal Operation)	-	1500	As per Applicable Clauses
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1500	As per Applicable Clauses
16(Leakage Current and Electric Strength)	-	1500	As per Applicable Clauses
15(Moisture Resistance)	-	1500	As per Applicable Clauses
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	As per Applicable Clauses
11(Temperature Rise/Heating)	-	1500	As per Applicable Clauses
10(Power Input)	-	1500	As per Applicable Clauses
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1500	As per Applicable Clauses
7(Marking/ Marking & Instructions)	-	1500	As per Applicable Clauses
6(Classification)	-	1500	As per Applicable Clauses
5(Rating)	-	1500	As per Applicable Clauses
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	1500	As per Applicable Clauses

Complete

28 Oct, 2023

-
-

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

43000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1500	-
31(Resistance to Rusting)	-	1500	-
30(Resistance to Heat & Fire)	-	1500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1500	-
28(Screws & Connection)	-	1500	-
27(Provision For Earthing)	-	1500	-
26(Terminals For External Conductors)	-	1500	-
25(Supply Connection & External Flexible Cables and Cords)	-	1500	-
24(Component)	-	1500	-
23(Internal wiring)	-	1500	-
22(Construction)	-	1500	-
21(Mechanical strength)	-	1500	-
20(Stability & Mechanical Hazards)	-	1500	-
19(Abnormal Operation)	-	1500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1500	-
16(Leakage Current and Electric Strength)	-	1500	-
15(Moisture Resistance)	-	1500	-
14(Transient Over Voltage)	-	1500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	-
11(Temperature Rise/Heating)	-	1500	-
10(Power Input & Current)	-	1500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1500	-
7(Marking/ Marking & Instructions)	-	1500	-
6(Classification)	-	1500	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	1500	-

Complete

28 Oct, 2023

-
-

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	1500	-
30.0(Resistance To Heat and Fire)	-	1500	-
29.0(Creepage Distances and Clearances)	-	1500	-
28.0(Screws and Connections)	-	1500	-
27.0(Provision For Earthing)	-	1500	-
26.0(Terminals for external conductors)	-	1500	-
25.0(Supply Connection and External Flexible Cords)	-	1500	-
23.0(Internal Wiring)	-	1500	-
22.0(Construction)	-	1500	-
21.0(Mechanical Strength)	-	1500	-
20.0(Stability and mechanical hazards)	-	1500	-
19.0(Abnormal Operation)	-	1500	-
17.0(Overload Protection of transformer and associated circuit)	-	1500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1500	-
15.0(Moisture resistance)	-	1500	-
14.0(Transient Overvoltage)	-	1500	-
13.0(Leakage Current and electric strength at operating temperature)	-	1500	-
11.0(Heating)	-	1500	-
10.0(Input and Current)	-	1500	-
8.0(Protection against access to live parts)	-	1500	-
6.0(Classification)	-	1500	-
7.0(Marking and Instructions)	-	1500	-
24(Components)	-	1500	-
19.11.4.7()	-	1500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1500	-
19.11.4.5(Immunity to conducted discharges)	-	1500	-
19.11.4.4(Surge immunity test)	-	1500	-
19.11.4.3(Fast transient bursts)	-	1500	-
19.11.4.2(Radiated fields)	-	1500	-
19.11.4.1(Electrostatic discharges)	-	1500	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	1500	-

Complete

28 Oct, 2023

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

16257 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	500	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(TRANSIENT OVERVOLTAGES)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.16(Automatic cord reel)	-	500	-
22.32(Oxygen bomb for rubber material)	-	500	-
22.47(Water pressure inlet)	-	500	-
22.106(Interlocks)	-	500	-
22.3(Flexing test)	-	500	-
24(Components)	-	500	-
Annex BB(Appliance for board ships)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
Strength requiement for Seat Cl9.1(The seat shall withstand the load of 1150 N for 30 minutes without permanent distortion of the seat or the hinge fittings or damage to any finish.)	-	500	-

Complete

28 Oct, 2023

-
-

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

19365 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	1000	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
22.1(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1 disable)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-

Complete

28 Oct, 2023

-
-

IS 10322 : Part 5 : Sec 4 (1987)

Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.8(Photometric Test)	-	3000	-
13.7(Resistance to Heat, Fire & Tracking)	-	3000	-
13.6(Insulation Resistance and Electric Strength)	-	3000	-
13.5(Resistance To Dust & Moisture)	-	3000	-
13.4(Endurance Test and Thermal test)	-	3000	-
13.3(Mechanical Strength Test )	-	3000	-
11(Protection Against Electric Shock )	-	3000	-
10(External & Internal Wiring)	-	3000	-
9(Terminals)	-	3000	-
8(Provision for Earthing)	-	3000	-
7(Creepage Distance And Clearances)	-	3000	-
6(Construction)	-	3000	-
5(Marking)	-	3000	-

Complete

28 Oct, 2023

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	3000	-
20.5(Classification of Luminaires')	-	3000	-
20.6(Marking)	-	3000	-
20.7(Construction)	-	3000	-
20.8(Creepage Distance and Clearances)	-	3000	-
20.9(Provision for earthing)	-	3000	-
20.10(Terminals)	-	3000	-
20.11(External & Internal Wiring)	-	3000	-
20.12(Protection against electric shock)	-	3000	-
20.13(Endurance Tests and Thermal Tests)	-	3000	-
20.14(Resistance to Dust & Moisture)	-	3000	-
20.15(Insulation Resistance and Electric Strength)	-	3000	-
20.16(Resistance to Heat , fire and tracking)	-	3000	-

Complete

28 Oct, 2023

-
-

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	3000	-
21.5(Classification of Luminaires')	-	3000	-
21.6(Marking)	-	3000	-
21.7(Construction)	-	3000	-
21.8(Creepage Distance and Clearances)	-	3000	-
21.10(Terminals)	-	3000	-
21.11(External & Internal Wiring)	-	3000	-
21.12(Protection against electric shock)	-	3000	-
21.13(Endurance Tests and Thermal Tests)	-	3000	-
21.14(Resistance to Dust & Moisture)	-	3000	-
21.15(Insulation Resistance and Electric Strength)	-	3000	-
21.16(Resistance to Heat , fire and tracking)	-	3000	-

Complete

28 Oct, 2023

-
-

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

1845 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	1000	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	2000	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	2000	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	2000	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	2000	-
10.0(Measurement of Heating up time)	-	2000	-
11.0(Measurement of sole plate temperature)	-	2000	-
12.0(Measurement of Tempearture Distribution)	-	2000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	2000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	2000	-
16.0(Measurement of Thermostatic staibility)	-	2000	-
6(Rating)	-	2000	-
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	2000	-
17(Finish)	-	2000	-

Complete

28 Oct, 2023

-
-

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

23550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.18 of IS 368:2014(Endurance)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	2000	-

Complete

28 Oct, 2023

-
-

IS 367 (1993)

Electric kettles and jugs for household and similar use - Specification (Fourth Revision)

67000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20(Finish)	-	2500	-
19(Endurance)	-	2500	-
18(Thermal Efficiency)	-	2500	-
17(Temperature of supporting surface)	-	2500	-
16(Minimum quantity of water that can be boiled)	-	2500	-
15(Time to boil water capacity)	-	2500	-
14(Time to boil one litre of water)	-	2500	-
13(Water Capacity)	-	2500	-
12(Mass)	-	2500	-
11(Overall Dimensions)	-	2500	-
9(Safety Requirements)	-	2500	-
8(Marking and Instruction)	-	2500	-
7(Classification)	-	2500	-
6(Rating)	-	2500	-

Complete

28 Oct, 2023

-
-

IS 13995 (1995)

Unlined moulded rubber boots - Specification

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	500	-
5.1.6(Design)	-	500	-
5.1.5(Flexing resistance of upper)	-	1000	-
5.1.4(Resistance to dry heat ageing )	-	1500	-
5.1.3(Tear Strength)	-	1000	-
5.1.2(Tensile Strength (after ageing))	-	1000	-
5.1.1(Tensile Strength (before ageing))	-	1000	-
4.1(Thickness )	-	750	-
6, 6.1(Marking)	-	500	-

Complete

28 Oct, 2023

-
-

IS 15844 (2010)

Sports Footwear Specification

25440 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.11(Corrosion resistance)	-	500	-
3.10(Ross Flex test)	-	500	-
3.10(Shape retention percent )	-	500	-
3.10(Crush load )	-	500	-
3.9(Lace abrasion test)	-	500	-
3.9(Strength of shoe lace tags )	-	500	-
3.9(Colour fastness to rubbing )	-	500	-
3.9(Breaking Strength )	-	500	-
3.8(Heat resistance tester )	-	500	-
3.8(Compression set )	-	500	-
3.8(Die-C tear Strength )	-	500	-
3.8(Elongation at Break )	-	500	-
3.8(Tensile Strength)	-	500	-
3.7(Flexing index)	-	500	-
3.7(Abrasion resistance )	-	500	-
3.7(Water absorption & loss percent )	-	500	-
3.7(Tensile Strength)	-	500	-
3.6(Ross flexing )	-	500	-
3.6(Adhesion to mid sole )	-	500	-
3.6(Abrasion resistance )	-	500	-
3.6(Die-C tear Strength )	-	500	-
3.6(Trouser tear strength )	-	500	-
3.5(Heat resistance tester )	-	500	-
3.5(Adhesive to sole)	-	500	-
3.5(Compression set )	-	500	-
3.5(Die-C tear Strength )	-	500	-
3.5(Split tear strength )	-	500	-
3.5(Elongation at Break )	-	500	-
3.5(Tensile Strength)	-	500	-
3.4(Colorfastness to light )	-	500	-
3.4(Colour fastness to crocking )	-	500	-
3.4(Tear Strength)	-	500	-
3.4(Elongation at Break )	-	500	-
3.4(Tensile Strength)	-	500	-
3.4(Adhesive Strength )	-	500	-
3.4(Hydrolysis )	-	500	-
3.4(Upper flexing resistance )	-	500	-
3.3.1(Contruction)	-	500	-
3.2.3 & 3.2.4(Visual )	-	500	-
3.2.2(Mass of pairs )	-	500	-
3.2.1(Design )	-	500	-
Cl. 3.6,Table 7,IS 3400(Part 17), iv)(Tear strength, kg/cm, Min)	-	500	-
Cl. 3.7 Table 10, Outsole Materials — Thermo Plastic Urethane (TPU) IS 3400 (Part 1) i)(Tensile strength)	-	500	-
CL. 3.8 Table 12, Insole Material: Stoble Non-woven, Annex G i)(Trouser tear strength, kg, Min)	-	500	-
CL. 3.8 Table 12, Cl. 6.12 IS 15298 (part1) ii)(Abrasion resistance, cycles, Min)	-	500	-
Cl. 3.8, Table 12, Annex F, iv)(Heat resistance, shrinkage linear, percent, Max)	-	500	-
Cl. 3.11 Table 16 A-3.4 of IS 7554 ii)(Resilience, percent, Min)	-	500	-
Cl. 3.11 Table 16 A-3.5 of IS 7554 iii)(Moisture resistance, percent, Min)	-	500	-
Cl. 3.11 Table 16 iv) a)A-3.1 of IS 7554(Initial dry area shape retention, percent, Min)	-	500	-
Cl. 3.11 Table 16 iv) b) A-3.3 of IS 7554(Area shape retention after 10th collapse, dry, percent, Min)	-	500	-
Cl. 3.11 Table 16,\ Annex B of IS 7554 v)(Peel strength, N/cm, Min)	-	500	-

Complete

28 Oct, 2023

-
-

IS 11544 (1986)

Specification for slipper, rubber

4300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.6(Thickness of components)	-	500	-
3.2.5(Type of Thread)	-	500	-
3.2.4(Colour fasntess to washing)	-	500	-
3.2.4(Picks per cm)	-	500	-
3.2.4(End per cm)	-	500	-
3.2.4(Mass per unit area)	-	500	-
3.2(Flexural endurance)	-	500	-
3.2(Hardness (IRHD))	-	500	-
3.2(Relative density )	-	500	-
3.1(Shape & Design)	-	500	-
3.2.2(Bottom Filling Material)	-	500	-
3.2.4.1(Weave of fabrics)	-	500	-
3.2.7(vulcanized process)	-	500	-
3.2.8(Workmanship and Finish -)	-	500	-
3.2.9(Preservation -)	-	500	-
Cl. 4, Cl. 4.1, Cl 4.2, Cl. 4.3(Marking and packing)	-	500	-

Complete

28 Oct, 2023

-
-

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

27825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	500	-
Table 1(CLASS II)	-	500	-
5.2.2.1(General)	-	500	-
5.2.2.2(Height of upper)	-	500	-
5.2.2.3(Seat region)	-	500	-
5.3.2.1(Construction)	-	500	-
5.3.1.2(Upper/outsole bond strength)	-	500	-
5.3.2.2(Leakproofness)	-	500	-
5.3.2.3(Specific ergonomic features )	-	500	-
5.3.4.1(Slip resistance)	-	750	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	750	-
5.3.4.3(Slip resistance on steel floor with glycerine )	-	750	-
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	750	-
5.3.2.5(Innocuousness )	-	20000	-
5.4.2.1(Upper)	-	500	-
5.4.2.2(Thickness )	-	500	-
5.4.2.3(Tear strenth)	-	500	-
5.4.2.4(Tensile properties)	-	500	-
5.4.2.5(Flexing resistance )	-	500	-
5.4.2.6(Water vapour permeability and coefficient )	-	500	-
5.4.2.7(pH value )	-	500	-
5.4.2.8(Hydrolysis)	-	500	-
5.4.2.9(Chromium VI content )	-	1000	-
5.5.2.1(Tear strength )	-	500	-
5.5.2.2(Abrasion resistance )	-	500	-
5.5.2.3(Water vapour permeability and coefficient )	-	500	-
5.5.2.4(pH value )	-	500	-
5.5.2.5(Chromium VI content )	-	500	-
5.6(Tongue )	-	500	-
5.6.2.1(Tear strength )	-	500	-
5.6.2.2(pH value )	-	500	-
5.6.2.3(Chromium VI content )	-	500	-
5.7.2.1(Insole and insock )	-	500	-
5.7.2.2(Insole and insock )	-	500	-
5.7.2.3(Water absorption and desorption )	-	500	-
5.7.4.1(Abrasion resistance )	-	500	-
5.7.4.2(Abrasion resistance )	-	500	-
5.7.2.5(Chromium VI content )	-	1000	-
5.8.2.1(Outsole)	-	500	-
5.8.1.1(Thickness )	-	500	-
5.8.1.2(Cleated area )	-	500	-
5.8.1.3(Cleat height)	-	500	-
5.8.2.2(Tear strength )	-	500	-
5.8.2.3(Abrasion resistance )	-	500	-
5.8.2.4(Flexing resistance )	-	500	-
5.8.2.5(Hydrolysis )	-	500	-
5.8.2.6(Interlayer bond strength )	-	500	-
6.2.1.1(Metallic anti-penetration insert )	-	500	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	500	-
6.2.1.2(Construction)	-	500	-
6.2.1.3(Dimensions )	-	500	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	500	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	500	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	500	-
6.2.2.1(Conductive footwear)	-	500	-
6.2.2.2(Antistatic footwear)	-	500	-
6.2.2.3(Electrically insulating footwear )	-	500	-
6.2.3.1(Heat insulation of sole complex )	-	500	-
6.2.3.2(Cold insulation of sole complex)	-	500	-
6.2.2.4(Energy absorption of seat region )	-	500	-
6.2.2.5(Water resistance )	-	500	-
6.2.2.6(Ankle protection)	-	500	-
6.2.7.1(Cut resistance foot wear)	-	500	-
6.2.7.2(Cut resistance foot wear)	-	500	-
6.2.7.3(Resistance to cutting)	-	500	-
6.2.7.4(Pentration resistance)	-	500	-
6.3.2.2(Upper- water penetration)	-	500	-
6.4.2.1(Resistance to hot contact)	-	500	-
6.4.2.2(Resistance to fuel oil)	-	500	-
7(a)(Marking)	-	500	-
7(b)(Marking)	-	300	-
7(c)(Marking)	-	300	-
7(d)(Marking)	-	300	-
7(e)(Marking)	-	300	-

Complete

28 Oct, 2023

-
-

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

29850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	500	-
5.2.3 Table-2(Seat Region)	-	500	-
5.3.1.1 Table-2(Construction)	-	500	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	500	-
Table-2(Strength)	-	500	-
5.3.2.1 Table-2(General)	-	500	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	500	-
5.3.2.3 Table-2(Impact Resistance -T- )	-	500	-
5.3.2.4 Table-2(Compression)	-	500	-
5.3.2.5 Table-2(Behaviour of toe cap)	-	500	-
5.3.3 Table-2(Leak Proofness)	-	500	-
5.3.4 Table-2(Specific Ergonomic)	-	500	-
Table-2(Features)	-	500	-
5.3.5.2 Table-2(Slip Resistance SRA)	-	500	-
5.3.5.3 Table-2(Slip Resistance SRB)	-	500	-
Table-2(0.18)	-	500	-
5.3.5.4 Table-2(Slip Resistance SRC)	-	500	-
5.4.1 Table-2(General)	-	500	-
5.4.2 Table-2(Thickness)	-	500	-
5 4 3 Table-2(Tear Strength)	-	500	-
5.4.4 Table-2(Tensile Properties)	-	500	-
5.4.5 Table-2(Flexing Resistance)	-	500	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	500	-
5 4.7 Table-2( )	-	500	-
5 4.8 Table-2(Hydrolysis)	-	500	-
5.4 9 Table-2(Chrome VI)	-	500	-
5.5.1 Table-2(Tear Strength)	-	500	-
5.5.2 Table-2(Abrasion Resistance)	-	500	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	500	-
5.5.4 Table-2(pH Value)	-	500	-
5.5.5 Table-2(Chrome VI)	-	500	-
5.6.1 Table-2(Tear Strength)	-	500	-
5.6.2 Table-2(pH Value)	-	500	-
5.6.3 Table-2(Chromium VI)	-	500	-
5.7.1 Table-3(Thickness)	-	500	-
5.7.2 Table-3(pH Value)	-	500	-
5.7.3 Table-3(Water Absorption &)	-	500	-
Table-3(Desorption)	-	500	-
5.7.4.1 Table-3(Insole Abrasion)	-	500	-
5.7.4.2 Table-3(Abrasion)	-	500	-
5.7.5 Table-3(Chromium VI)	-	500	-
5.8.1 Table-2(Design)	-	500	-
5.8.2 Table-2(Tear Strength)	-	500	-
5.8.3 Table-3(Abrasion Resistance)	-	500	-
5.8.4 Table-3(Flexing Resistance)	-	500	-
5.8.5 Table-3(Hydrolysis)	-	500	-
5.8.6 Table-2(Interlayer BondStrength)	-	500	-
6.2.1 Table-I8(Penetration Resistance)	-	500	-
6.2.2.1 Table-18(Electrical Properties)	-	500	-
Table-18(Conductive Footwear)	-	500	-
6.2.2.2 Table-18(Antistatic Footwear)	-	500	-
6.2.2.3 Table-18(Electrically Insulated)	-	500	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	500	-
6.2.3.2 Table-18(Cold Insulated)	-	500	-
6.2.4 Table-18(Energy Absorption of seat region)	-	500	-
6.2.5 Table-18(Water Resistance)	-	500	-
6.2.6 Table-18(Ankle Protection)	-	500	-
6.2.7 Table-18(Cut Resistance)	-	500	-
6.3 Table-18(Water Penetration & Absorption)	-	500	-
6.4.1 Table-18(Resistance to Hot Contact)	-	500	-
6.4.2 Table-18(Resistance to Fuel oil)	-	500	-
Cl.4, Table1, Annex A ISO 20344 :2011(Classification and designs)	-	500	-
Cl. 5,Cl.5.1Table 2, Table 3(General)	-	500	-
Cl. 5.2, Cl.5.2.1, Figure 3,(General)	-	500	-
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	500	-
Cl.7, table 2,table 18,table 20, table21, EN 13832-1,EN 13832-3: 2006,6.2.2.3(Electrically insulating footwear)	-	500	-
8(Information to be supplied)	-	500	-
Cl.8.1 IS 15298 Part 3:2018, ISO 20346 :2014(General)	-	500	-
8.2(Electrical properties)	-	500	-
8.2.1(Conductive footwear)	-	500	-
8.2.2(Antistatic footwear)	-	500	-
8.3(Insocks)	-	500	-

Complete

28 Oct, 2023

-
-

IS 12254 (1993)

Polyvinyl chloride (PVC) Industrial boots - Specification (First Revision)

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Sulphur content )	-	3000	-
5.5(Relative Density)	-	500	-
5.6(Volatility )	-	500	-
5.7(Lead Content )	-	1000	-
5.1.1(Shape and Dimension)	-	500	-
5.2(Shape and Dimension)	-	500	-
5.3.1(Thickness)	-	500	-
5.3.2 Table 1(Thickness, Boot Upper, IS 12240 (Part 1))	-	500	-
5.3.2 Table 1(Thickness, Foxing strip, At the Heel, IS 12240 (Part 1))	-	500	-
5.3.2 Table 1(Thickness, Foxing strip , Elsewhere, IS 12240 (Part 1))	-	500	-
5.3.2 Table 1(Boot Bottom, Full Thickness, IS 12240 (Part 1))	-	500	-
5.3.2 Table 1(Boot Bottom, Outsole only, IS 12240 (Part 1))	-	500	-
5.3.2 Table 1(Heel , Full Thickness, IS 12240 (Part 1))	-	500	-
5.3.2 Table 1(Heel, Wearing surface to filler Block,IS 12240 (Part 1))	-	500	-
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	500	-
5.5(Relative Density, IS 12240 (Part 3))	-	500	-
5.6(Volatility, IS 12240 ( Part 2) )	-	500	-
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	500	-
5.8 Table 3(Tensile Requirements, Sole, IS 12240 (part 6))	-	500	-
5.9(Resistance to Cut Growth (Flexing test) for Sole, IS 12240 (Part 7))	-	500	-
5.1(Resistance to Flexing for Upper, IS 12240 (Part 8))	-	500	-
5.11(Leg Height, IS 12240 (part 9))	-	500	-
5.12(Leakage Resistance)	-	500	-
5.13(Cold Flex Temperature)	-	500	-
5.14(Finish)	-	500	-
5.13(Cold flex test)	-	500	-
5.10(resistance to flexing for upper )	-	500	-
5.9(Resistance to cut growth (flexing test))	-	500	-
5.8(Tensile Strength )	-	500	-
5.7(Lead contect )	-	1000	-
5.6(Volatility )	-	500	-
5.5(Relative density )	-	500	-
5.4(Hardness (IRHD))	-	500	-
5.3(Thickness )	-	500	-
5.2(Soling pattern )	-	500	-
5.1(Shape & Design)	-	500	-

Complete

28 Oct, 2023

-
-

IS 13893 (1994)

Polyurethane soles semirigid - specification

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	500	As per applicable clause
4.3(Ross Flex test)	-	500	As per applicable clause
4.3(Flexural strength )	-	500	As per applicable clause
4.3(Abrasion Resistance)	-	500	As per applicable clause
4.3(Elongation at break)	-	500	As per applicable clause
4.3(Tensile Strength )	-	500	As per applicable clause
4.3(Hardness Shore(A))	-	500	As per applicable clause
4.3(Relative density )	-	500	As per applicable clause
4.2(Thickness )	-	500	As per applicable clause
4.1(Design)	-	500	As per applicable clause
5, 5.1, 5.2(Packing And Marking)	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 16645 (2018)

Moulded Plastics Footwear ” Lined or Unlined Polyurethane Boots for General Industrial use ” Specification

7600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.8.2& 5.8.3(Hydrolysis )	-	500	As per applicable clause
5.8.1(Tensile strength after Hydrolysis)	-	500	As per applicable clause
5.7(Split tear strength )	-	500	As per applicable clause
5.6(Resistance to soling to cut growth)	-	500	As per applicable clause
5.5(Cold flex temp of upper)	-	500	As per applicable clause
5.4(Hardness (IRHD))	-	500	As per applicable clause
5.3(Tesile Strength )	-	500	As per applicable clause
5.2(Resistance to flexing of boot upper)	-	500	As per applicable clause
5.1(General )	-	500	As per applicable clause
4.3(Thickness of components )	-	500	As per applicable clause
4.2(Thickness )	-	500	As per applicable clause
4.1(Soling Pattern )	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 14544 (1998)

Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification

18975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	500	As per applicable clause
5, 5.1(Requirements )	-	500	As per applicable clause
5.2, 5.2.1, 5.2.1.1(Materials - Upper Leather )	-	500	As per applicable clause
5.2.2(Materials - Insole Material )	-	500	As per applicable clause
5.2.3(Materials - Stiffener )	-	500	As per applicable clause
5.2.4(Materials - Lining Material )	-	500	As per applicable clause
5.2.5(Materials - Threads )	-	500	As per applicable clause
5.2.6, 5.2.6.1(Materials - Grinderies - Lasting tacks )	-	500	As per applicable clause
5.2.6, 5.2.6.2(Materials - Grinderies - Shanks)	-	500	As per applicable clause
5.2.6, 5.2.6.3(Materials - Grinderies - Eyelets)	-	500	As per applicable clause
5.2.7(Materials - Cotton NEWAR)	-	500	As per applicable clause
5.2.8(Materials - Toe-Compound)	-	500	As per applicable clause
5.2.9(Materials - Laces)	-	500	As per applicable clause
5.2.10(Materials - Steel Toe Cap)	-	500	As per applicable clause
5.2.11.1 (Table 1)(Sole and Heel )	-	500	As per applicable clause
5.2.11.2(Sole and Heel )	-	500	As per applicable clause
5.2.11.3 (Table 2)(Sole and Heel )	-	500	As per applicable clause
5.2.11.4(Sole and Heel )	-	500	As per applicable clause
5.3 (Table 3)(Components)	-	500	As per applicable clause
5.4.8(Workmanship and Finish)	-	500	As per applicable clause
5.4.8.2(Workmanship and Finish)	-	500	As per applicable clause
5.4.8.3(Workmanship and Finish)	-	500	As per applicable clause
5.5, 5.5.1(Mass)	-	500	As per applicable clause
5.5, 5.5.2(Mass)	-	500	As per applicable clause
5.5, 5.5.3(Mass)	-	500	As per applicable clause
5.6(Performance Test)	-	500	As per applicable clause
5.7, 5.7.1(Adhesion Test on Moulded Bottoms)	-	500	As per applicable clause
5.7, 5.7.2(Adhesion Test on Moulded Bottoms)	-	500	As per applicable clause
7, 7.1(Marking)	-	500	As per applicable clause
7.1.1, 7.1.2(Marking)	-	500	As per applicable clause
5.7(Adhesion Test )	-	500	As per applicable clause
5.6(Impact resistance )	-	500	As per applicable clause
5.5(Mass per pairs)	-	500	As per applicable clause
5.4(Construction)	-	500	As per applicable clause
5.3(Thickness of components )	-	500	As per applicable clause
5.2.11.4(Ageing Test)	-	500	As per applicable clause
5.2.11.2(Mass after resistance to chemical effect)	-	500	As per applicable clause
5.2.11(Flexing Resistance )	-	500	As per applicable clause
5.2.11(Tensile Strength )	-	500	As per applicable clause
5.2.11(Elongation at break)	-	500	As per applicable clause
5.2.11(Hardness (IRHD))	-	500	As per applicable clause
5.2.11(Material Sole & heel )	-	500	As per applicable clause
5.2.10(Impact resistance )	-	500	As per applicable clause
5.2.9(Length )	-	500	As per applicable clause
5.2.8(Toe-compound )	-	500	As per applicable clause
5.2.7(Width of fabric)	-	500	As per applicable clause
5.2.6.3(Eyelets diameter)	-	500	As per applicable clause
5.2.6.2(Corrosion Shanks )	-	500	As per applicable clause
5.2.6.1(Corrosion test Lasting tacks)	-	500	As per applicable clause
5.2.5(Breaking Strength )	-	500	As per applicable clause
5.2.5(Twist)	-	500	As per applicable clause
5.2.5(Count)	-	500	As per applicable clause
5.2.5(Composition )	-	500	As per applicable clause
5.2.4(Lining Material )	-	500	As per applicable clause
5.2.3(Peel Strength )	-	500	As per applicable clause
5.2.3(Shape Retention)	-	500	As per applicable clause
5.2.3(Moisture)	-	500	As per applicable clause
5.2.3(Resilience Test)	-	500	As per applicable clause
5.2.3(Hardness )	-	500	As per applicable clause
5.2.3(Dry collapsing)	-	500	As per applicable clause
5.2.2(Insole Material )	-	500	As per applicable clause
5.2(Material )	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 17043 (2018)

Derby shoes - Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	1000	As per applicable clause
4.15.2(Breaking load & tag retention)	-	1000	As per applicable clause
4.15.1(Length of laces )	-	1000	As per applicable clause
4.14(Eyelet strength )	-	1000	As per applicable clause
4.13.8(Flex resistance )	-	1000	As per applicable clause
4.13.7(Abrasion resistance )	-	1000	As per applicable clause
4.13.6(Tear Strength)	-	1000	As per applicable clause
4.13.5(Ageing test)	-	1000	As per applicable clause
4.13.4(Hardness (IRHD))	-	1000	As per applicable clause
4.13.3(Density )	-	1000	As per applicable clause
4.13.2(Thickness )	-	1000	As per applicable clause
4.13.1(Meterial)	-	1000	As per applicable clause
4.12(Breaking Strength of thread)	-	1000	As per applicable clause
4.11.2(Tear Strength)	-	1000	As per applicable clause
4.11.1(Thickness )	-	1000	As per applicable clause
4.10(Toe Puff & counter stiffener thickness )	-	1000	As per applicable clause
4.9.3(Abrasion resistance )	-	1000	As per applicable clause
4.9.2(Water absorption & desorption )	-	1000	As per applicable clause
4.9.1(Thickness )	-	1000	As per applicable clause
4.8.3(Water absorption & desorption )	-	1000	As per applicable clause
4.8.2(Abrasion )	-	1000	As per applicable clause
4.8.1(Thickness )	-	1000	As per applicable clause
4.7.4(Water vapour permeability & coefficent )	-	1000	As per applicable clause
4.7.3(Abrasion resistance )	-	1000	As per applicable clause
4.7.2(Tear Strength)	-	1000	As per applicable clause
4.7.1(Thickness )	-	1000	As per applicable clause
4.6.4(Water penetration and water absorption)	-	1000	As per applicable clause
4.6.3(Water vapour permeability & coefficent )	-	1000	As per applicable clause
4.6.2(Tear Strength)	-	1000	As per applicable clause
4.6.1(Thickness )	-	1000	As per applicable clause
4.5.8(Energy absorption of seat region )	-	1000	As per applicable clause
4.5.7(Cold insulation tester )	-	1000	As per applicable clause
4.5.6(Heat insulation of sole complex)	-	1000	As per applicable clause
4.5.5.1(Electrical Properties Antistatic )	-	1000	As per applicable clause
4.5.4(Slip Resitance)	-	1000	As per applicable clause
4.5.3.2(Interayer bond strength)	-	1000	As per applicable clause
4.5.3.1(Upper/outsole bond strength)	-	1000	As per applicable clause
4.5.2(Ergonomic Feature)	-	1000	As per applicable clause
4.5.1(Contruction)	-	1000	As per applicable clause
4.4(Height of upper )	-	1000	As per applicable clause
4.3.2(Weight)	-	1000	As per applicable clause
4.4, Table 3(Height of the Upper)	-	1000	As per applicable clause
4.5.3(Bond Strength)	-	1000	As per applicable clause
4.9(Insocks)	-	1000	As per applicable clause
6.1(Scale of Sampling)	-	1000	As per applicable clause
6.2(Methods of Selecting Footwear)	-	1000	As per applicable clause
6.3.1(Visual and Tactile Examination)	-	1000	As per applicable clause
6.3.2(Dimensional Characteristics)	-	1000	As per applicable clause
6.3.3.1(Tests for physical requirements)	-	1000	As per applicable clause
6.3.3.2(Tests for chemical requirements)	-	1000	As per applicable clause
7(Marking)	-	1000	As per applicable clause
6.1.3, Table 4(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	1000	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 17037 (2018)

Anti riot shoes - Specification

50300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	1000	As per applicable clauses
4.16.2(Breaking load & lag retention)	-	1000	As per applicable clauses
4.16.1(Length of laces )	-	1000	As per applicable clauses
4.15(D-ring and Hooks )	-	1000	As per applicable clauses
4.15.10(Resistance to fuel oil )	-	1000	As per applicable clauses
4.15.9(Resistance to hot contact )	-	1000	As per applicable clauses
4.15.8(Flex resistance )	-	1000	As per applicable clauses
4.15.7(Abrasion resistance )	-	1000	As per applicable clauses
4.15.6(Tear Strength)	-	1000	As per applicable clauses
4.14.5(Ageing test)	-	1000	As per applicable clauses
4.14.4(Hardness (IRHD))	-	1000	As per applicable clauses
4.14.3(Density )	-	1000	As per applicable clauses
4.14.2(Thickness )	-	1000	As per applicable clauses
4.14.1(Meterial)	-	1000	As per applicable clauses
4.13(Breaking Strength of thread)	-	1000	As per applicable clauses
4.12.2(Tear Strength)	-	1000	As per applicable clauses
4.12.1(Thickness )	-	1000	As per applicable clauses
4.11.2(Tear Strength)	-	1000	As per applicable clauses
4.11.1(Thickness)	-	1000	As per applicable clauses
4.10(Counter stiffener thickness)	-	1000	As per applicable clauses
4.9.3(Water absorption & desorption )	-	1000	As per applicable clauses
4.9.2(Abrasion resistance )	-	1000	As per applicable clauses
4.9.1(Meterial)	-	1000	As per applicable clauses
4.8.3(Water absorption & desorption )	-	1000	As per applicable clauses
4.8.2(Abrasion resistance )	-	1000	As per applicable clauses
4.8.1(Meterial)	-	1000	As per applicable clauses
4.7.5(Water vapour permeability & coefficent )	-	1000	As per applicable clauses
4.7.4(Abrasion resistance )	-	1000	As per applicable clauses
4.7.3(Tear Strength)	-	1000	As per applicable clauses
4.7.1(Meterial)	-	1000	As per applicable clauses
4.6.4(Water penetration and water absorption)	-	1000	As per applicable clauses
4.6.3(Water vapour permeability & coefficent )	-	1000	As per applicable clauses
4.6.2(Tear Strength)	-	1000	As per applicable clauses
4.6.1(Thickness )	-	1000	As per applicable clauses
4.5.11(Water resistance machine method)	-	1000	As per applicable clauses
4.5.11(Water Resistance Tray method )	-	1000	As per applicable clauses
4.5.11(Thickness Toe puff & counter stiffener)	-	1000	As per applicable clauses
4.5.10(Energy absorption of seat region )	-	1000	As per applicable clauses
4.5.9(Cold insulation of sole complex)	-	1000	As per applicable clauses
4.5.8(Heat insulation of sole complex)	-	1000	As per applicable clauses
4.5.7.1(Antistatic test)	-	1000	As per applicable clauses
4.5.6.4(Compression resistance)	-	1000	As per applicable clauses
4.5.6.3(Impact resistance )	-	1000	As per applicable clauses
4.5.6.2(Internal Toe cap length)	-	1000	As per applicable clauses
4.5.6.1(General)	-	1000	As per applicable clauses
4.5.5.4(Ageing test)	-	1000	As per applicable clauses
4.5.5.3(Nail penetraion Insert )	-	1000	As per applicable clauses
4.5.5.2(Flex resistance )	-	1000	As per applicable clauses
4.5.5.1(Dimension)	-	1000	As per applicable clauses
4.5.4(Slip Resitance)	-	1000	As per applicable clauses
4.5.3.2(Interayer bond strength)	-	1000	As per applicable clauses
4.5.3.1(Upper/outsole bond strength)	-	1000	As per applicable clauses
4.5.2(Ergonomic Feature)	-	1000	As per applicable clauses
4.5.1(Contruction)	-	1000	As per applicable clauses
4.4(Height of upper )	-	1000	As per applicable clauses
4.3.2(Weight)	-	1000	As per applicable clauses
4.3.1(Size)	-	1000	As per applicable clauses
4.2(Design )	-	1000	As per applicable clauses
4.1(General)	-	1000	As per applicable clauses
4.5.3(Bond strength)	-	1000	As per applicable clauses
4.9(Insocks)	-	1000	As per applicable clauses
5(Chemical Requirements)	-	1000	As per applicable clauses
6.1(Scale of Sampling)	-	1000	As per applicable clauses
6.2(Methods of Selecting Footwear)	-	1000	As per applicable clauses
6.3.1(Visual and Tactile Examination)	-	1000	As per applicable clauses
6.3.2(Dimensional Characteristics)	-	1000	As per applicable clauses
6.3.3.1(Tests for physical requirements)	-	1000	As per applicable clauses
6.3.3.2(Tests for chemical requirements)	-	1000	As per applicable clauses
7(Marking)	-	1000	As per applicable clauses
4.4, Table 2(Shoe size)	-	1000	As per applicable clauses
4.4, Table 2(Height)	-	1000	As per applicable clauses
6.1.3, Table 3(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	1000	As per applicable clauses

Complete

28 Oct, 2023

-
-

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Phthalates contect )	-	3000	As per applicable clause
8.6(Carcinogenic Disperse Dyes)	-	4000	As per applicable clause
8.6(Allergenic Disperse Dyes)	-	4000	As per applicable clause
8.6(Leak Proof test)	-	1000	As per applicable clause
8.4(Volatility & lead content )	-	1000	As per applicable clause
8.3(Compression Resistance)	-	1000	As per applicable clause
8.3(Impact resistance )	-	1000	As per applicable clause
8.2(Internal Toe cap length)	-	1000	As per applicable clause
8.1(Height of upper )	-	1000	As per applicable clause
8.0(Construction)	-	1000	As per applicable clause
7.10(Ageing test)	-	1000	As per applicable clause
7.9(Hydrolysis)	-	1000	As per applicable clause
7.8(Insocks Material )	-	1000	As per applicable clause
7.7.5(Upper / Outsole bond strength)	-	1000	As per applicable clause
7.7.4(Interlayer Bond Strength )	-	1000	As per applicable clause
7.7.3(Flexing Resistance )	-	1000	As per applicable clause
7.7.2(Abrasion Resistance)	-	1000	As per applicable clause
7.7.1(Tear Strength )	-	1000	As per applicable clause
7.7(Hardness (IRHD))	-	1000	As per applicable clause
7.7(Thickness)	-	1000	As per applicable clause
7.7(Density )	-	1000	As per applicable clause
7.6(Peel Strength )	-	1000	As per applicable clause
7.6(Shape retention)	-	1000	As per applicable clause
7.6(Moisture )	-	1000	As per applicable clause
7.6(Resilience test )	-	1000	As per applicable clause
7.6(Hardness)	-	1000	As per applicable clause
7.6(Dry collapsing)	-	1000	As per applicable clause
7.5(Insocks )	-	1000	As per applicable clause
7.5(Insoles )	-	1000	As per applicable clause
7.5(Water abrasion & desorption)	-	1000	As per applicable clause
7.5(Thickness )	-	1000	As per applicable clause
7.4(Tensile Strength )	-	1000	As per applicable clause
7.4(Abrasion Resistance)	-	1000	As per applicable clause
7.4(Tear Strength )	-	1000	As per applicable clause
7.3(Flexing Resistance )	-	1000	As per applicable clause
7.3(Tensile Strength )	-	1000	As per applicable clause
7.3(Thickness )	-	1000	As per applicable clause
7.3(Water Vapour permeability & coefficient )	-	1000	As per applicable clause
7.3(Tear Strength )	-	1000	As per applicable clause
7.1(Compression Tester)	-	1000	As per applicable clause
7.1(Impact resistance )	-	1000	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

19365 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	As Per applicable Clauses
7.0(Marking and instructions)	-	1000	As Per applicable Clauses
8.0(Protection against access to live part test)	-	1000	As Per applicable Clauses
9.0(Starting of motor-operated appliances test)	-	1000	As Per applicable Clauses
10.0(Power Input and current test)	-	1000	As Per applicable Clauses
11.0(Heating test)	-	1000	As Per applicable Clauses
13.0(Leakage current and electric strength test)	-	1000	As Per applicable Clauses
14.0(Transient voltages)	-	1000	As Per applicable Clauses
15.0(Moisture Resistance)	-	1000	As Per applicable Clauses
16.0(Leakage current and electric strength test)	-	1000	As Per applicable Clauses
17.0(Overload protection of transformers test)	-	1000	As Per applicable Clauses
18.0(Endurance test)	-	1000	As Per applicable Clauses
19.0(Abnormal Operations)	-	1000	As Per applicable Clauses
20.0(Stability and Mechanical Hazards)	-	1000	As Per applicable Clauses
21.0(Mechanical Strength)	-	1000	As Per applicable Clauses
22.0(Construction verification related tests)	-	1000	As Per applicable Clauses
23.0(Internal wiring)	-	1000	As Per applicable Clauses
24.0(Components)	-	1000	As Per applicable Clauses
25.0(Supply connections and External Flexible Cords)	-	1000	As Per applicable Clauses
26.0(Terminal for External Conductors)	-	1000	As Per applicable Clauses
27.0(Provision for Earthing)	-	1000	As Per applicable Clauses
28.0(Screws and connections)	-	1000	As Per applicable Clauses
29.0(Clearances and Creepage distances and solid insulation)	-	1000	As Per applicable Clauses
30.0(Resistance to heat and fire)	-	1000	As Per applicable Clauses
31.0(Resistance to rusting)	-	1000	As Per applicable Clauses
32.0(Radiation, Toxicity and Similar hazards)	-	1000	As Per applicable Clauses

Complete

28 Oct, 2023

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	As per applicable clause
7(Marking and instructions)	-	1000	As per applicable clause
8(Protection against live parts)	-	1000	As per applicable clause
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	As per applicable clause
10(POWER INPUT AND CURRENT)	-	1000	As per applicable clause
11(HEATING)	-	1000	As per applicable clause
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	As per applicable clause
14(IMPULSE VOLTAGE TEST)	-	1000	As per applicable clause
15(HUMIDITY TREATMENT TEST)	-	1000	As per applicable clause
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	As per applicable clause
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	As per applicable clause
18(ENDURANCE)	-	1000	As per applicable clause
19(ABNORMAL OPERATION)	-	1000	As per applicable clause
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	As per applicable clause
21(MECHANICAL STRENGTH)	-	1000	As per applicable clause
22(CONSTRUCTION)	-	1000	As per applicable clause
23(INTERNAL WIRING)	-	1000	As per applicable clause
24(COMPONENTS)	-	1000	As per applicable clause
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	As per applicable clause
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	As per applicable clause
27(PROVISION FOR EARTHING)	-	1000	As per applicable clause
28(SCREWS AND CONNECTIONS)	-	1000	As per applicable clause
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	As per applicable clause
30(RESISTANCE TO HEAT AND FIRE)	-	1000	As per applicable clause
31(RESISTANCE TO RUSTING)	-	1000	As per applicable clause
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

48000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	1000	-
13.1(General)	-	500	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1000	-
15.0(General)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1000	-
16.0(General)	-	500	-
16.1(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
19(Abnormal Operation)	-	1000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
22(Construction verification related test)	-	1000	-
23(General)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	1000	-
11.4(Heating appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	1000	-
11.8(Temperature rise)	-	1000	-

Complete

28 Oct, 2023

-
-

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

149850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,Table 1(Class I, IS 15298)	-	800	As per applicable
4,Table 1(Class II, IS 15298)	-	800	As per applicable
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	800	As per applicable
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	800	As per applicable
5.2.3, Table 10 ,Design A(Seat Region)	-	800	As per applicable
5.3.1.1(Construction)	-	800	As per applicable
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	800	As per applicable
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	800	As per applicable
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	800	As per applicable
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	800	As per applicable
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	800	As per applicable
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	800	As per applicable
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	800	As per applicable
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	800	As per applicable
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	800	As per applicable
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	800	As per applicable
5.3.6(Innocuousness)	-	800	As per applicable
5.4.1,Table 10(General)	-	800	As per applicable
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	800	As per applicable
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	800	As per applicable
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	800	As per applicable
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	800	As per applicable
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	800	As per applicable
5.4.7(Ph Value ; ISO 20344,6.9)	-	800	As per applicable
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	800	As per applicable
5.4.9(Chromium VI content; ISO 17075)	-	800	As per applicable
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	800	As per applicable
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	800	As per applicable
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	800	As per applicable
5.5.4(Ph Value ; ISO 20344,6.9)	-	800	As per applicable
5.5.5(Chromium VI content; ISO 17075)	-	800	As per applicable
5.6(Tongue - IS 15298 Part 2 )	-	800	As per applicable
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	800	As per applicable
5.6.2(Ph Value ; ISO 20344,6.9)	-	800	As per applicable
5.6.3(Chromium VI content; ISO 17075)	-	800	As per applicable
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	800	As per applicable
5.7.2(Ph Value ; ISO 20344,6.9)	-	800	As per applicable
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	800	As per applicable
5.7.4.1(Insole ; ISO 20344,7.3 )	-	800	As per applicable
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	800	As per applicable
5.7.5(Chromium VI content; ISO 17075)	-	800	As per applicable
5.8.1(Design, IS 15298 Part 2 )	-	800	As per applicable
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	800	As per applicable
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	800	As per applicable
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	800	As per applicable
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	800	As per applicable
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	800	As per applicable
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	800	As per applicable
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	800	As per applicable
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	800	As per applicable
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	800	As per applicable
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	800	As per applicable
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	800	As per applicable
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	800	As per applicable
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	800	As per applicable
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	800	As per applicable
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	800	As per applicable
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	800	As per applicable
6.2.2.3(Electrically insulating footwear; EN 50321)	-	800	As per applicable
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	800	As per applicable
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	800	As per applicable
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	800	As per applicable
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	800	As per applicable
6.2.6.1(Construction)	-	800	As per applicable
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	800	As per applicable
6.2.7 (Ankle protection ; ISO 20344 , 5.17)	-	800	As per applicable
6.2.8.1(Design)	-	800	As per applicable
6.2.8.2(Construction)	-	800	As per applicable
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	800	As per applicable
6.2.8.4(Penetration Resistance)	-	800	As per applicable
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	800	As per applicable
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	800	As per applicable
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	800	As per applicable
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	800	As per applicable

Complete

28 Oct, 2023

-
-

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

63200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(REQUIREMENTS)	-	1000	As per applicable clause
5.2(Materials)	-	1000	As per applicable clause
5.2.1(Materials)	-	1000	As per applicable clause
5.2.1.1(Materials)	-	1000	As per applicable clause
5.2.2(Materials)	-	1000	-
5.2.3(Materials)	-	1000	As per applicable clause
5.2.4(Materials)	-	1000	As per applicable clause
5.2.5(Materials)	-	1000	As per applicable clause
5.2.6(Materials)	-	1000	As per applicable clause
5.2.6.1(Materials)	-	1000	As per applicable clause
5.2.6.2(Materials)	-	1000	As per applicable clause
5.2.6.3(Materials)	-	1000	As per applicable clause
5.2.7(Materials)	-	1000	As per applicable clause
5.2.8(Materials)	-	1000	As per applicable clause
5.2.9(Materials)	-	1000	As per applicable clause
5.2.10(Materials)	-	1000	As per applicable clause
5.2.11(Materials)	-	1000	As per applicable clause
5.2.11.1(Materials)	-	1000	As per applicable clause
5.2.11.2(Materials)	-	1000	As per applicable clause
5.2.11.3(Materials)	-	1000	As per applicable clause
5.3(Components)	-	1000	As per applicable clause
5.4( Manufacture )	-	1000	As per applicable clause
5.4.1( Manufacture )	-	1000	As per applicable clause
5.4.8(Workmanship and Finish)	-	1000	As per applicable clause
5.5(Mass)	-	1000	As per applicable clause
5.6(Performance Test)	-	1000	As per applicable clause
5.7(Adhesion Test on Moulded Bottoms)	-	1000	As per applicable clause
5.6.(Toe Impact test)	-	1000	As per applicable clause
5.5(Mass per pairs)	-	1000	As per applicable clause
5.4.8(Leg height)	-	1000	As per applicable clause
5.4(Dimension )	-	1000	As per applicable clause
5.3 & 5.4.2(Thickness of components )	-	1000	As per applicable clause
5.2.11.2(Flexing resistance)	-	1000	As per applicable clause
5.2.11.2(Resistance to Fuel Oil)	-	1000	As per applicable clause
5.2.11.2(Elongation at break)	-	1000	As per applicable clause
5.2.11.2(Tensile Strength)	-	1000	As per applicable clause
5.2.11.2(Hardness (Shore A))	-	1000	As per applicable clause
5.2.11(Hardness (IRHD)-after ageing)	-	1000	As per applicable clause
5.2.11(Flexing resistance)	-	1000	As per applicable clause
5.2.11(Elongation at break)	-	1000	As per applicable clause
5.2.11(Tensile Strength)	-	1000	As per applicable clause
5.2.11(Hardness (IRHD))	-	1000	As per applicable clause
5.2.11(Relative density )	-	1000	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

6600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Stud bolt)	-	500	As per applicable clause
5.4(Stud diameter)	-	500	As per applicable clause
5.4(Tear strength )	-	500	As per applicable clause
5.4(Hardness (Shore A))	-	500	As per applicable clause
5.4(Breaking strength )	-	500	As per applicable clause
5.4(Elongation at break )	-	500	As per applicable clause
5.4(Tensile Strength )	-	500	As per applicable clause
5.4(Relative density )	-	500	As per applicable clause
5.4(Shrinkage test (at 100 C temp))	-	500	As per applicable clause
5.4(Shrinkage test (at room temp))	-	500	As per applicable clause
5.4(Split tear strength )	-	500	As per applicable clause
5.4(Compression set)	-	500	As per applicable clause
5.4(Hardness (Shore A))	-	500	As per applicable clause
5.4(Relative density)	-	500	As per applicable clause
5.3(Thickness )	-	500	As per applicable clause
5.1(Shape & Design)	-	500	As per applicable clause
6, 6.1, 6.2(Marking and packing)	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

IS 6721 (1972)

Specification for PVC sandal

3400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Dimension)	-	500	As per applicable clause
4.0(Lead Content )	-	500	As per applicable clause
4.0(Volatility % by mass)	-	500	As per applicable clause
4.0(Tear strength )	-	500	As per applicable clause
4.0(Elongation at break )	-	500	As per applicable clause
4.0(Tensile Strength )	-	500	As per applicable clause
4.0(Hardness (IRHD))	-	500	As per applicable clause
4.0(Density )	-	500	As per applicable clause
4.2(Design)	-	500	As per applicable clause
6(Marking)	-	500	As per applicable clause

Complete

28 Oct, 2023

-
-

Bureau of Indian Standards

The National Standards Body of India

GEO CHEM LABORATORIES PVT.LTD.

Plot No-306, Udyog Vihar, Phase-2, Gurugram, Haryana, Gurugram, Gurugram, Haryana, 122016

9871590424 [email protected]

Scope List