BIS - LIMS (Laboratory Information Management System)

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 [email protected]

Scope List

Reset

87 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4368 (1967)

Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes

ALL GRADES ALL SIZES ALL DESIGNATION

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Hardness & Tensile Test)	-	2000	-
Cl 8(Diameter, Ovality & Weight)	-	1000	-
6.1, Table-1(Ladle Analysis)	-	7000	-

Complete

24 Oct, 2022

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Decarburization)	-	1500	-
Cl 9(Inclusion)	-	1500	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 13(Length, Width & Thickness)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 8(Press)	-	500	-
Cl 10(Erichsen Cupping)	-	500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 15(Length, Width & Thickness)	-	500	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-
Cl 11(Expansion Test)	-	500	-
Cl 14(Weldability)	-	1500	-
7.1(Carbon %)	-	1000	-
7.1(Manganese %)	-	1000	-
7.1(Phosphorus %)	-	1000	-
7.1(Sulphur %)	-	1000	-
7.1(Silicon %)	-	1000	-
7.1( Aluminium %)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 3502 (2009)

Steel chequered plates (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Length, Width, Thickness & Chequered Height)	-	500	-
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-

Complete

24 Oct, 2022

-
-

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

ALL GRADES ALL SIZE ALL DESIGNATION

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & 9(Diameter)	-	500	-
6(Carbon %)	-	1000	-
6(Manganese %)	-	1000	-
6(Phosphorus %)	-	1000	-
6(Sulphur %)	-	1000	-
6(Silicon %)	-	1000	-
6( Aluminium %)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

ALL GRADES ALL SIZE ALL DESIGNATION

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 12(Supplementary Requirements)	-	500	-
Cl 9(UTM & HBW)	-	2000	-
6.1, 6.2(carbon)	-	1000	-
6.1, 6.2(sulphur)	-	1000	-
6.1, 6.2(phosphorus)	-	1000	-
6.1, 6.2(manganese)	-	1000	-
6.1, 6.2(silicon )	-	1000	-
12.2(Bend Test)	-	500	-
6.1, 6.2(aluminium)	-	1500	-
6.1, 6.2(cromium)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 2041 (2009)

Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)

ALL GRADES ALL SIZE ALL DESIGNATION

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Length, Width & Thickness)	-	500	-
Cl 12.1(UTM)	-	1500	-
Cl 12.2(Press)	-	500	-
Cl 12.3(Load Impact )	-	1500	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Nickel-IS 228)	-	1500	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Molybdenum-IS 228)	-	1500	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Copper-IS 228)	-	1500	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Chromium-IS 228)	-	1500	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Nitrogen- IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Aluminium-IS 228)	-	1500	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Sulphur-IS 228)	-	1000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Phosphorous-IS 228)	-	1000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Manganese-IS228)	-	1000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Silicon-IS 228)	-	1000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Carbon-IS 228)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

ALL GRADES ALL SIZE ALL DESIGNATION

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Length, Width & Thickness)	-	500	-
Cl 12(UTM)	-	1500	-
Cl 13(Press)	-	500	-
6.1( Nitrogen%)	-	2000	-
6.1(Carbon %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
Cl 14(Workmanship)	-	1000	-
6.1( Aluminium %)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

all grades all size all designation available

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( CARBON)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SULPHUR)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(PHOSPHURS)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(MANGANESE)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NITROGEN)	-	2000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(SILICON)	-	1000	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)( ALUMINIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Nickel)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Chromium)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(Molybdenum)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(NIOBIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(VANADIUM)	-	1500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TIN)	-	1500	-
Cl 6(Diameter & Out Of Roundness)	-	500	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3)(TITANIUM)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

ALL GRADES ALL SIZE ALL DESIGNATION AVAILABLE

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	1500	-
Cl 10(Length, Width & Thickness)	-	500	-
Cl 8.5(Workmanship)	-	500	-
6.0(NITROGEN)	-	2000	-
6.0(CARBON)	-	1000	-
6.0(SILICON)	-	1000	-
6.0(MANGANESE)	-	1000	-
6.0(SULPHUR)	-	1000	-
6.0(PHOSPHORUS)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

All Grades/ All Sizes/All Designation

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Workmanship)	-	1500	-
Cl 8(UTM)	-	1500	-
Cl 11(Length, Width & Thickness)	-	500	-
7.0(CARBON)	-	1000	-
7.0(NITROGEN)	-	2000	-
7.0(SILICON)	-	1000	-
7.0(MANGANESE)	-	1000	-
7.0(PHOSPHORUS)	-	1000	-
7.0(SULPHUR)	-	1000	-
8(Mechanical and Physical Properties)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grades/ All sizes/ All Designation

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.3(UTM)	-	1500	-
Cl 11.3(Press)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl 12(Sudden Load Applied)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grades/ All Sizes/ All ADesignation

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1( Nitrogen%)	-	2000	-
4.1(Ni)	-	1500	-
4.1(Cr)	-	1500	-
4.1(Mo)	-	1500	-
4.1( Ti)	-	1500	-
4.1(V)	-	1500	-
4.1( Nb)	-	1500	-
4.1( Aluminium %)	-	1500	-
4.1( Copper %)	-	1500	-
Cl 8.1(UTM)	-	1500	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-

Complete

24 Oct, 2022

-
-

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Press)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	1000	-
Cl 8 & Table 3(UTM)	-	1500	-
7.1(Carbon %)	-	1000	-
7.1(Manganese %)	-	1000	-
7.1(Phosphorus %)	-	1000	-
7.1(Silicon %)	-	1000	-
7.1( Nitrogen%)	-	2000	-
7.1(Sulphur %)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1500	-
Cl 9(Press)	-	500	-
Cl 12(Length, Width & Thickness)	-	500	-

Complete

24 Oct, 2022

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

7500 View breakup
Rs.7500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1( Nitrogen%)	-	2000	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 10.2(Workmanship)	-	500	-

Complete

24 Oct, 2022

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

16500 View breakup
Rs.9000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
9( FREEDOM FROM DEFECTS)	-	500	-
11 & 12(DIMENSIONS and Tolerances)	-	500	-
10.1.a)( Macro examination IS 11371)	-	1500	-
10.1.b)( Sulphur print tests IS 12037)	-	2000	-

Complete

24 Oct, 2022

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

13500 View breakup
Rs.5500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	500	-
6.1(Manganese %)	-	500	-
6.1(Silicon %)	-	500	-
6.1(Sulphur %)	-	500	-
6.1(Phosphorus %)	-	500	-
6.1( Nitrogen%)	-	2000	-
6.1( Aluminium %)	-	1500	-
6.1( Copper %)	-	1500	-
6.1( Nb)	-	1500	-
6.1(V)	-	1500	-
6.1( Ti)	-	1500	-
Cl 8(UTM)	-	500	-
Cl 13(Length, Width & Thickness)	-	500	-
Cl 9(Press)	-	500	-

Complete

24 Oct, 2022

-
-

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
TABLE-1 (Clause-4)( CARBON)	-	500	-
TABLE-1 (Clause-4)(MANGANESE)	-	500	-
TABLE-1 (Clause-4)(SILICON)	-	500	-
TABLE-1 (Clause-4)(SULPHUR)	-	500	-
TABLE-1 (Clause-4)(PHOSPHURS)	-	500	-
TABLE-1 (Clause-4)( ALUMINIUM)	-	1500	-
TABLE-1 (Clause-4)(Nickel)	-	1500	-
TABLE-1 (Clause-4)(Chromium)	-	1500	-
TABLE-1 (Clause-4)(Molybdenum)	-	1500	-
TABLE-1 (Clause-4)(NIOBIUM)	-	1500	-
TABLE-1 (Clause-4)(VANADIUM)	-	1500	-
TABLE-1 (Clause-4)(TITANIUM)	-	1500	-
3 Tables 2 to 9(Types)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	500	-
Clause -4, 4.1(MANGANESE)	-	500	-
Clause -4, 4.1(SILICON)	-	500	-
Clause -4, 4.1(SULPHUR)	-	500	-
Clause -4, 4.1(PHOSPHURS)	-	500	-
Clause -4, 4.1(NITROGEN)	-	2000	-
Clause -4, 4.1( ALUMINIUM)	-	1500	-
Clause -4, 4.1(Nickel)	-	1500	-
Clause -4, 4.1(Chromium)	-	1500	-
Clause -4, 4.1(Molybdenum)	-	1500	-
Clause -4, 4.1(NIOBIUM)	-	1500	-
Clause -4, 4.2(VANADIUM)	-	1500	-
Clause -4, 4.3(TITANIUM)	-	1500	-
Cl 8(Physical Requirements)	-	1500	-
Cl 6.1(Diameter)	-	500	-
Cl 6.2(Weight)	-	500	-

Complete

24 Oct, 2022

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	-
Clause 3.1.1(Phosphorus)	-	500	-
Cl 7(UTM)	-	1500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	-

Complete

24 Oct, 2022

-
-

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

5500 View breakup
Rs.4500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.(Size-Height)	-	500	-
6.1.1.2(Macro Examination)	-	1500	-
6.1.1.3(Micro Examination)	-	1500	-
4.1(Size-Width)	-	500	-
6.2(Side Hung Shutter- Thickness of hinge)	-	500	-
6.2(Side Hung Shutter- Pin diameter)	-	500	-
6.2(Side Hung Shutter-Width of hinge)	-	500	-

Complete

24 Oct, 2022

-
-

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	600	-
6.1(Manganese %)	-	600	-
6.1(Silicon %)	-	600	-
6.1(Sulphur %)	-	600	-
6.1(Phosphorus %)	-	600	-
6.1( Aluminium %)	-	1500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	500	-
6.1(Silicon %)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

All grades and sizes testing available

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Mass of Coating: Single Spot Test)	-	2500	-
Cl 10(Galvanising Test)	-	2500	-
Cl 8.1(UTM)	-	500	-
Cl 14(Length, Width & Thickness)	-	500	-
Cl 13(Weight)	-	500	-
Cl 8.2(Press)	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Pitch of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Depth of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	500	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-

Complete

24 Oct, 2022

-
-

IS 210 (2009)

Grey iron castings - Specification (First Revision)

All Grades and size

4500 View breakup
Rs.2500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1000	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	1500	Dumble Sample Preparation Rs.500/-5
16, Table 3(Hardness Test)	-	500	-
13(SIZE OF TEST BARS-Diameter)	-	250	-
13(SIZE OF TEST BARS-Length)	-	250	-
17,Annex B(TRANSVERSE TEST)	-	500	-
10.1(FREEDOM FROM DEFECTS)	-	500	-

Complete

24 Oct, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 [email protected]

Scope List