BIS - LIMS (Laboratory Information Management System)

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 [email protected]

Scope List

Reset

87 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 4223 (1975)

Steel Wire For Umbrella Ribs

ALL GRADES ALL SIZES ALL DESIGNATION

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.1(Sulphur- Appropriate parts of IS 228.)	-	1000	-
Cl 6.1(Phosphorus- Appropriate parts of IS 228.)	-	1000	-
7(Freedom rom defects , IS 4223)	-	500	-
8,9 (Sizes and Tolerances - IS 4223)	-	500	-
10.1, Table 1(Mechanical ptoperties - IS 1608(Pt -1))	-	1500	-
10.4( Straightness Test - IS 4223)	-	500	-

Complete

24 Oct, 2022

-
-

IS 3885 : Part 2 (1992)

Steel for the manufacture of laminated springs (Railway Rollingstock): Part 2 rib and groove sections (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1, 6.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 3.1, 6.1 & Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 3.1, 6.1 & Table 1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 3885 : Part 1 (1992)

Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1, 6.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3.1, 6.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
7.1(Hardness)	-	500	-
10(Freedom from defects)	-	500	-
9(Inclusion Rating)	-	1500	-
8(Decarburisation)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 3431 (1982)

Specification for steel for the manufacture of volute helical and laminated springs for automotive suspension (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 2.1, 5.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 2.1, 5.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 2.1, 5.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 2.1, 5.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 2.1, 5.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
10(Freedom from defects)	-	500	-
11(Surface Decarburisation)	-	1500	-
12(Straightness)	-	500	-
Cl. 2.1, 5.1 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
13, Table 5&Table 6(Dimensions and Tolerance)	-	500	-

Complete

24 Oct, 2022

-
-

IS 3195 (1992)

Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3, 6.1, 6.2 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 3, 6.1, 6.2 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
7(Hardness)	-	500	-
8(Decarburisation)	-	1500	-
9(Inclusion rating)	-	1500	-
10(Freedom from defects)	-	500	-
11( DIMENSIONS AND TOLERANCES)	-	500	-

Complete

24 Oct, 2022

-
-

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Carbon- Relevant parts of IS 228.)	-	1000	-
Cl. 5.1(Manganese- Relevant parts of IS 228.)	-	1000	-
Cl. 5.1(Sulphur- Relevant parts of IS 228.)	-	1000	-
Cl. 5.1(Phosphorus- Relevant parts of IS 228.)	-	1000	-
7(Sizes and tolernces)	-	500	-
8(FREEDOM FROM DEFECTS)	-	500	-

Complete

24 Oct, 2022

-
-

IS 2507 (1975)

Specification for cold - rolled steel strips for springs (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(FREEDOM FROM DEFECTS)	-	500	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Carbon- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Silicon- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Manganese- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Sulphur- Appropriate parts of IS 228.)	-	1000	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1(Phosphorus- Appropriate parts of IS 228.)	-	1000	-
10(Physical properties(optional))	-	1500	-

Complete

24 Oct, 2022

-
-

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
7.1(i)Ultimate Tensile Strength,)	-	1500	-
8( DIMENSIONS AND TOLERANCES)	-	500	-

Complete

24 Oct, 2022

-
-

IS 1812 (1982)

Specification for carbon steel wire for the manufacture of wood screws (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8( FREEDOM FROM DEFECTS)	-	500	-
7(. SIZE TOLERANCE)	-	500	-
6.2( Bend Test )	-	500	-
Cl. 5.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 3748 (1990)

Tool and die steels - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, 7.2, 12.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl 7.1, 7.2, 12.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl 7.1, 7.2, 12.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl 7.1, 7.2, 12.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl 7.1, 7.2, 12.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
6(Freedom from defects)	-	500	-
9.1(Hardness , max-IS 1500 )	-	500	-
10(Dimensions and Tolerances, mm)	-	500	-
14.3(iii)Macro etch test)	-	1500	-
14.6(vi) Metallographic test)	-	1500	-
Cl 7.1, 7.2, 12.1 & Table 1(Cobalt- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 7494 (1981)

Specification for steel for valves for internal combustion engines (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, 6.2, 6.3, & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1, 6.2, 6.3, & Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
5(Freedom from defects)	-	500	-
9.1, Table 5(Tensile Test-1608:Part 1)	-	1500	-
12(Dimensions and Tolerances, mm)	-	1000	-
10(Inclusion rating)	-	1500	-
Cl. 6.1, 6.2, 6.3, & Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8(Freedom from defects)	-	500	-
6.1, Table 3 (Impact Test)	-	1000	-
7(Workmanship & Finish)	-	500	-
6.1, Table 3 (Tensile Test-1608:Part 1)	-	1500	-
6.1, Table 3 (Yield Strength, Mpa)	-	1500	-
6.1, Table 3 (Elongation, %)	-	1500	-
6.1, Table 3 (Reduction in area, Percent)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 9550 (2001)

Bright steel bars - Specification (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Decarburisation)	-	1500	-
8.1 and 8.2(Dimensions and Tolerances, mm)	-	500	-
7(Mechancial Properties)	-	500	-
8.2.3(Straightness Tolerances)	-	500	-
Cl.6(Parameter as per requiremnt of purchaser.)	-	5000	-

Complete

24 Oct, 2022

-
-

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 6.1 & Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
10.2(Tensile Test-1608:Part 1)	-	1500	-
12 and 13(Dimensions and Tolerances)	-	500	-
11(Impact Test-1757)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions and Tolerances)	-	500	-
6(Freedom from defects)	-	500	-
Cl. 5.1, 5.2 & Table1(Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5.1, 5.2 & Table1(Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1, 5.2 & Table1(Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	2000	-

Complete

24 Oct, 2022

-
-

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Sulphur -IS 228 or method specified in relevant ISO standard)	-	1000	-
Cl.4(Phosphorus -IS 228 or method specified in relevant ISO standard)	-	1000	-
5.2(Tensile Test-1608:Part 1)	-	1500	-
5.3(Bend Test-1599)	-	500	-
7.1(Freedom from defects)	-	500	-
8.2(Width)	-	500	-
8.2(Thickness)	-	500	-
9.1(Finishing & Packing)	-	500	-

Complete

24 Oct, 2022

-
-

IS 1110 (1990)

Ferrosilicon - Specification (Fourth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Carbon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Silicon- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Sulphur- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Phosphorus- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Aluminium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1500	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Manganese-IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1000	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Titanium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1500	-
Cl. 4.1, 7.2.1, 7.2.2 & 7.2.3, Table 1(Calcium- IS 1559 (Parts 1 to 7) or any other established instrumental/ chemical method )	-	1500	-

Complete

24 Oct, 2022

-
-

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1000	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1000	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	1500	-
10(Hardness)	-	500	-
8.3(Flattening Test- IS 2328)	-	1000	-
14.0(Workmanship)	-	2000	-

Complete

24 Oct, 2022

-
-

IS 7138 (1973)

Specification for steel tubes for furniture purposes

ALL GRADES ALL SIZES ALL DESIGNATION

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(DIMENSIONS)	-	500	-
9.1(Tensile Test)	-	1500	-
9.2(Bend test)	-	500	-
4.2(Tolerance)	-	500	-

Complete

24 Oct, 2022

-
-

IS 3074 (2013)

Steel tubes for automotive purposes - Specification (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7, 20,Table 1,2,4 &6( C)	-	1000	-
7, Table 1,2,4 &6(Mn)	-	1000	-
7, Table 1,2,4 &6(S)	-	1000	-
7, Table 1,2,4 &6(P)	-	1000	-
7, Table 1,2,4 &6(Si)	-	1000	-
8.3,18,(Flattening Test)	-	500	-
5.1(Workmanship)	-	500	-
8.2,15,17,22, Table 3,5 &7(Tensile Tests,IS 1608 Part 1)	-	1500	-
7, Table 1,2,4 &6(Ni)	-	1500	-
7, Table 1,2,4 &6(Mo)	-	1500	-
8.5(Drift Test)	-	500	-

Complete

24 Oct, 2022

-
-

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1.3(Tensile Strength)	-	1500	-
4.1(Sulphur-Percentage by mass)	-	1000	-
4.1(Phosphorus-Percentage by mass)	-	1500	-
13.2(Flattening Test)	-	500	-
13.3(Bend Test (Strip))	-	500	-
6.0(Workmanship)	-	500	-

Complete

24 Oct, 2022

-
-

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 Table 1(Carbon)	-	1000	-
Cl. 5.1 Table 1(Silicon)	-	1000	-
Cl. 5.1 Table 1(Manganese)	-	1000	-
Cl. 5.1 Table 1(Phosphorous)	-	1000	-
Cl. 5.1 Table 1(Sulphur)	-	1000	-
Cl. 8.1(Tensile Strength)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-

Complete

24 Oct, 2022

-
-

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Surface Finish)	-	500	-
8.5(Erichsen Cupping Test)	-	500	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-

Complete

24 Oct, 2022

-
-

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

ALL GRADES ALL SIZES ALL DESIGNATION

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Clause - 5.1, Table-3( CARBON)	-	1000	-
Clause - 5.1, Table-3(SILICON)	-	1000	-
Clause - 5.1, Table-3(MANGANESE)	-	1000	-
Clause - 5.1, Table-3(PHOSPHURS)	-	1000	-
Clause - 5.1, Table-3(SULPHUR)	-	1000	-

Complete

24 Oct, 2022

-
-

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	1500	-
11(Surface finish)	-	500	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-

Complete

24 Oct, 2022

-
-

IS 15962 (2012)

Structural steels for buildings and structures with improved seismic resistance

ALL GRADES ALL SIZES ALL DESIGNATION

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Freedom from Defects)	-	500	-
Cl 13(Dimensions)	-	500	-
Cl 10(Tensile Test)	-	1500	-
Clauses 7, 8.1 & .2, Table- 1(E250S, C)	-	1000	-
Clauses 7, 8.1 & .2, Table- 1(E250S, Mn )	-	1000	-
Clauses 7, 8.1 & .2, Table- 1(E250S, P)	-	1000	-
Clauses 7, 8.1 & .2, Table- 1(E250S, S)	-	1000	-
Clauses 7, 8.1 & .2, Table- 1(E250S, Si)	-	1000	-
Cl 11(Impact Test)	-	2000	-

Complete

24 Oct, 2022

-
-

IS 15914 (2011)

High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(UTM)	-	1500	-
Cl 10(Length, Width & Thickness)	-	500	-
6.0(CARBON)	-	1000	-
6.0(SULPHUR)	-	1000	-
6.0(PHOSPHORUS)	-	1000	-
6.0(MANGANESE)	-	1000	-
6.0(SILICON)	-	1000	-
6.0(ALUMINIUM)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 15103 (2002)

Fire resistant steel - Specification

ALL GRADES ALL SIZES ALL DESIGNATION

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Tensile Test)	-	1500	-
Cl 11(Bend Test)	-	500	-
Cl 12(Impact Test)	-	1000	-
Cl 13(Freedom from Defects)	-	500	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, C)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Si)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mn)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, P)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, S)	-	1000	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Cr)	-	1500	-
Clauses 6 & 7.1, Table- 1(FR- Fe 410, Mo)	-	1500	-

Complete

24 Oct, 2022

-
-

IS 11587 (1986)

Specification for structural weather resistant steels

ALL GRADES ALL SIZES ALL DESIGNATION

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Tensile Test)	-	1500	-
Cl 9(Bend Test)	-	500	-
Cl 10(Impact Test)	-	1500	-
Cl 11(Flattening Test)	-	500	-
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	1000	-
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	1500	-

Complete

24 Oct, 2022

-
-

Bureau of Indian Standards

The National Standards Body of India

National Institute of secondary steel technology

Post Box No. 92, GT Road, Sirhind Side, Opposite Floating restaurant, MANDI GOBINDGARH, Fatehgarh Sahib, Punjab, 147301

9815904568 [email protected]

Scope List