BIS - LIMS (Laboratory Information Management System)

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List

Reset

773 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15603 (2005)

Alphacypermethrin, WP - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Sieving Requirements)	-
3.2.3 (Suspensibility Test)	-
3.2.4 (Wettability)	-
3.3.2 (Acidity or Alkalinity)	-

Partial

-
-

IS 1165 (2002)

Milk Powder (Bi-lingual)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 (Bacterial count)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.1 (Description)	-
3.2 (Flavour and taste)	-
3.4.5 (Titratable acidity (lactic acid))	-

Partial

-
-

IS 427 (2013)

Distemper, dry, colour as required - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Form and Condition)	-
4.2.1 (Composition)	-
4.3.1 (Lead restriction)	-
4.2.2 & 7, Table-1(i) (Drying time)	-
4.2.2 & 7, Table-1(ii) (Consistency)	-
4.2.2 & 7, Table-1(iii) (Finish)	-
4.2.2 & 7, Table-1(iv) (Colour)	-
4.2.2 & 7, Table-1(vi) (Residue on seive)	-
4.2.2 & 7, Table-1(vii) (Recoating properties)	-
4.2.2 & 7, Table-1(viii) (Resistance to alkali)	-
4.2.2 & 7, Table-1(ix) (Resistance to dry rubbing)	-

Partial

-
-

IS 15489 (2013)

Paint, plastic emulsion - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Composition)	-
6.2 (Conditions in the Container)	-
6.3 (Thinning)	-
6.4 (Application Properties)	-
6.5 (Mass in kg/10 litre)	-
6.6 (Opacity)	-
Table 1, 6.10, 6.11 and 9.1 (Consistency)	-
Table 1, 6.10, 6.11 and 9.2 (Drying time,(a) Surface Dry, class A and B)	-
Table 1, 6.10, 6.11 and 9.3 (Drying time,(a) Surface Dry, ass C and D)	-
Table 1, 6.10, 6.11 and 9.4 (Drying time, Hard Dry, class A and B)	-
Table 1, 6.10, 6.11 and 9.5 (Drying time, Hard Dry, ass C and D)	-
Table 1, 6.10, 6.11 and 9.6 (Finish)	-
Table 1, 6.10, 6.11 and 9.7 (Gloss at 60°, class A)	-
Table 1, 6.10, 6.11 and 9.8 (Gloss at 60°, class B)	-
Table 1, 6.10, 6.11 and 9.9 (Gloss at 60°, class C)	-
Table 1, 6.10, 6.11 and 9.10 (Gloss at 60°, class D)	-
Table 1, 6.10, 6.11 and 9.11 (Colour)	-
Table 1, 6.10, 6.11 and 9.12 (Resistance to alkali)	-
Table 1, 6.10, 6.11 and 9.13 (Washability and eanability)	-
Table 1, 6.10, 6.11 and 9.14 (Accelerated storage stability)	-
Table 1, 6.10, 6.11 and 9.15 (Recoating properties)	-

Partial

-
-

IS 3450 (1994)

Carbon papers - Handwriting - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Description)	-
5.3 (Size)	-
5.4 (Carbon work)	-
5.3 (Resistance to curling)	-
Table- 1(i) (Substance of the)	-
Table- 1(ii) (Coating)	-
6 (Keeping quality)	-
Table- 1(i) (Substance of the)	-

Partial

-
-

IS 2339 (2013)

Aluminium paints for general purposes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Composition)	-
5.2 (Lead Restriction)	-
5.3/8.1 (i) (Drying time)	-
5.3/8.1 (iv) (Mass)	-
5.3/8.1 (v) (Wet opacity)	-
5.3/8.1 (vi) (Flexibility and adhesion, bend test)	-
5.3/8.1 (vii) (Resistance to humidity under condition of condensation)	-
5.3/8.1 (viii) (Flash point)	-
5.3/8.1 (ix) (Keeping properties)	-
5.1 (Composition)	-
5.2 (Lead Restriction)	-
5.3, 8.1, Table 1 (Drying time)	-
5.3, 8.1, Table 1 (Consistency)	-
5.3 and 8.1, Table 1, (Finish)	-
5.3 and 8.1, Table 1 (Mass)	-
5.3, 8.1, Table 1 ("Wet opacity,)	-
5.3 and 8.1, Table 1 (Flexibility and adhesion, bend test using Type 1 apparatus and 6.25 mm dia Mandrel)	-
5.3, 8.1, Table 1 (Resistance to humidity under condition of condensation)	-
5.3, 8.1, Table 1 (Flash point)	-
5.3, 8.1, Table 1 (Keeping properties)	-

Complete

-
-

IS 2933 : Part 1 (2013)

Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2.1.(ii) (b)Viscosity by ford cup No-4)	-
Table 2..(ii) (Mass in Kg/10L,Min.)	-
6.4 (Lead Restriction)	-
Table 2 (iii) Drying time max. (a) Surface dry)	-
Table 2 (iii) Drying time max. (b) Hard dry)	-
Table 2 (iii) Drying time max. (c) Tack free)	-
Table 2 (iv) (Wet opacity Min,m²/10L)	-
6.1.5 (Phthalic anhydride)	-
Table 2 (v) (Finish)	-
Table 2 (vi) (Fineness of grind,microns,Max.)	-
Table 2 (vii) (Colour)	-
Table 2 (vii) (Colour)	-
Table 2 (ix) Flexibility and adhesion (a) Scratch hardness)	-
Table 2 (ix) Flexibility and adhesion (b) Bend Test,(with 6.25mm)	-
Table 2 (xi) (Flash point)	-
Table 2 (xii) (Keeping properties)	-
Table 2..(ii) (Mass in Kg/10L,Min.)	-

Partial

-
-

IS 265 (2021)

HYDROCHLORIC ACID SPECIFICATION Fifth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Description)	-
Table 1.(ii) (Residue on ignition)	-
Table 1.(iii) (Sulphates (SO4))	-
Table 1.(v) (Free chlorine and bromine)	-
Table 1.(vi) (Sulphite (as SO2))	-
Table 1.(vii) (heavy metals(as Pb))	-
Table 1.(ix) (Ammonium compounds (as NH4))	-
Table 1.(x) (Mercury(as Hg))	-
Table 1.(vi) (Sulphite (as SO2))	-

Complete

-
-

IS 13209 (1991)

Indelible ink - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2 (Description)	-
3.3 (Colour)	-
3.4 (Acidity)	-
3.5 (Total Solids)	-
3.6 (Development)	-
3.7, 3.7.1 (Bleaching)	-
3.7.2 (Resistance to Organic Solvents)	-
3.8 (Keeping Quality)	-
3.8 (Keeping Quality)	-

Partial

-
-

IS 15573 (2018)

Polyaluminium chloride (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Description -)	-
5.1.1, 5.1.2, 5.2, Table-1(i) (Aluminium as Al2O3,)	-
5.1.1, 5.1.2, 5.2, Table-1(ii) (Basicity)	-
5.1.1, 5.1.2, 5.2, Table-1(iii) (Chloride (as Cl))	-
5.1.1, 5.1.2, 5.2, Table-1(iv) (Sulphates(as SO4))	-
5.1.1, 5.1.2, 5.2, Table-1(x) (Insoluble)	-
5.1.1, 5.1.2, 5.2, Table-1(xi) (Ph of 5% of solution)	-
5.1.1,5.1.2,5.2, Table-1, Toxic substances (Mercury(as Hg))	-
5.1.1, 5.1.2 ,5.2, Table-1, Toxic substances (Arsenic(as As))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Cadmium(as Cd))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Lead(as Pb))	-
5.1.1.5.1.2,5.2, Table-1, Toxic substances (Iron(as Fe))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Manganese(as Mn))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Chromium (as Cr))	-
5.1.1, 5.12, 5.2, Table-1, Toxic substances (Selenium (as Se))	-
5.1.1.5.1.2,5.2, Table-1, Toxic substances (Iron(as Fe))	-

Partial

-
-

IS 266 (1993)

Sulphuric acid - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.2 (Description)	-
4.2 Table-1(iii) (Iron (as Fe),)	-
4.2&3 Table-1(iv) (Chlorides (as ),)	-
4.2, Table-1(vii) (Oxiddizable Impurities(as S02),)	-
4.2Table-1(viii) (Organic matter)	-
4.2 Table-1(xi) (Selenium(as Se),)	-
4.2 Table-1(xii) (Mangnese (as Mn),)	-
4.2Table-1(v) (Lead (as Pb))	-
4.2, Table-1(xiv) (Zinc (as Zn),)	-
4.2, Table-1(ix) (Nitrate)	-
4.2, Table-1(x) (Ammonia)	-
4.2 Table-1(iii) (Iron (as Fe),)	-

Complete

-
-

IS 573 (1992)

Trisodium phosphate - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Description)	-
5.2, Table-1(i) (Matter insoluble in water)	-
5.2, Table-1(ii) (Phosphates(as P₂O₅))	-
5.2, Table-1(iii) (Carbonares(as Na₂CO₃))	-
5.2, Table-1(iv) (Carbonate Alkalinity (as NaOH))	-
5.2, Table-1(v) (Free sodium hydroxide (as NaOH))	-
5.2, Table-1(vi) (Total alkalinity ( as NaOH))	-
5.2, Table-1(ix) (Sulphates(as SO4))	-
5.2, Table-1(x) (Arsenic(as As2O3))	-
5.2, Table-1(xii) (Soluble silica(as SiO2))	-
5.2, Table-1(xiii) (Chloride (as Cl))	-

Complete

-
-

IS 2730 (1977)

Specification for magnesium sulphate (Epsom Salts) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 Table 1 .Sl No.i (Magnesium sulphate ( as MgSO4 ), ( calculated with reference to the material dried at 300°C),)	-
3.2 Table 1 .Sl No.vii (Matter insoluble in water)	-
3.2 Table 1 .Sl No.viii (Acidity or alkalinity)	-
3.2 Table 1 .Sl No.ii (Chlorides (as Cl))	-
3.2 Table 1 .Sl No.iii (Lead (as Pb))	-
3.2 Table 1 .Sl No.iv (Arsenic ( as As2O3 ))	-
3.2 Table 1 .Sl No.v (Iron as ( Fe ))	-
3.2 Table 1 .Sl No.vi (Zinc)	-
3.1 (Description)	-

Partial

-
-

IS 7021 (2017)

Protein - Rich food supplements for infants and pre - School children - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3.3 Table 2 (Moisture)	-
4.3.3 Table 2 (Total Ash)	-
4.3.1 (Description)	-
4.3.2 (Flavour)	-
4.3.3 Table 2 (Crude Fibre)	-
4.3.3 Table 2 (Fat)	-
4.3.3 Table 2 (Protein)	-
4.3.3 Table 2 (Acid insoluble Ash)	-

Partial

-
-

IS 6031 (1997)

Calcium propionate, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (DESCRIPTION)	-
4.1 (Identification Tests)	-
4.3, Table 1 (Moisture,)	-
4.2 (pH )	-
4.3, Table 1 (Matter insoluble in water)	-
4.3, Table 1 (Heavy metals)	-
4.3, Table 1 (Fe)	-
4.3, Table 1 (Magnesium (as MgO))	-
3.0 (DESCRIPTION)	-

Partial

-
-

IS 5470 (2002)

Dicalcium phosphate, animal feed grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (Description)	-
4.4 Table 1 (Moisture)	-
4.4 Table 1 (Acid insoluble ash)	-
4.4 Table 1 (Total ash)	-
4.4 Table 1 (Arsenic ( as As2O3 ))	-
4.4 Table 1 (Lead ( as Pb ))	-
4.4 Table 1 (Phosphorus ( as P ))	-
4.4 Table 1 (Calcium ( as Ca ))	-
4.1 (Sieve Test)	-
4.4 Table 1 (Presence of proteinous/organic impurities)	-
3.0 (Description)	-

Partial

-
-

IS 2802 (1964)

Specification for ice-cream

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Acidity percent, ice cream only)	-
4.1 Table 1 (Total Solids)	-
4.1 Table 1 (weight in gram, ice cream)	-
4.1 Table 1 (Milk Fat, ice cream)	-
4.1 Table 1 (Sucrose, all types)	-
3.2 (Texture and Appearance)	-
3.1 (Odour and Flavour)	-
3.3 (Freedom from Dirt)	-

Partial

-
-

IS 4752 (1994)

Sodium metabisulphite, food grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.4 Table 1 (Water insoluble matter)	-
3.4 Table 1 (Thiosulphate)	-
3.4 Table 1 (Arsenic)	-
3.4 Table 1 (Iron)	-
3.4 Table 1 (Heavy metals)	-
3.4 Table 1 (Selenium)	-
3.4 Table 1 (Purity, as SO2)	-
3.4 Table 1 (Purity, as Na2S2O5)	-
3.4 Table 1 (pH)	-

Complete

-
-

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 a) (MARKING OF METERS : Name Plate )	-
7.1 b) (MARKING OF METERS : Name Plate )	-
7.1 c) (MARKING OF METERS : Name Plate )	-
7.1 d) (MARKING OF METERS : Name Plate )	-
7.1 e) (MARKING OF METERS : Name Plate )	-
7.1 f) (MARKING OF METERS : Name Plate )	-
7.1 g) (MARKING OF METERS : Name Plate )	-
7.1 h) (MARKING OF METERS : Name Plate )	-
7.1 j) (MARKING OF METERS : Name Plate )	-
7.1 k) (MARKING OF METERS : Name Plate )	-
7.1 m) (MARKING OF METERS : Name Plate )	-
7.1 p) (MARKING OF METERS : Name Plate )	-
7.1 n) (MARKING OF METERS : Name Plate )	-
12.7.6.3 (ac Voltage test)	-
12.7.6.4 (Insulation resistance test)	-
11.1 (Limits of Error and Interpretation or Test Results)	-
12.16 a) (Limits of Error and Interpretation or Test Results)	-
12.16 b) (Limits of Error and Interpretation or Test Results)	-
12.16 c) (Limits of Error and Interpretation or Test Results)	-
12.15 (Test of Meter Constant/Registration)	-
12.14 (Test of Starting Conditions)	-
12.13 (Test of No-Load Condition)	-
12.7.4 (Test of Influence of Self-Heating)	-
12.17 (Repeatability of Error Test )	-
12.7.2 (Test of Influence of Supply Voltage)	-
12.7.5 (Test of Influence of Heating)	-
12.8 (TestorImmunity to Earth Fault)	-
12.3.3 ( Spring Hammer Test)	-
12.4 (Testof Resistance to Heat and Fire )	-
6.1 (General)	-
6.2 (Meter case)	-
6.3 (Window)	-
6.6 (Clearance and creepage dis¬t¬ances)	-
6.7 (Insulating encased meter)	-
7.1.1 (BIS Standard Mark)	-
7.2 (Connection diagrams and terminal marking)	-
Cl 6.3 (Inspection)	-

Partial

-
-

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (CLASS I)	-
Table 1 (CLASS II)	-
5.2.2.1 (General)	-
5.2.2.2 (Height of upper)	-
5.2.2.3 (Seat region)	-
5.3.2.1 (Construction)	-
5.3.1.2 (Upper/outsole bond strength)	-
5.3.2.2 (Leakproofness)	-
5.3.2.3 (Specific ergonomic features )	-
5.3.4.1 (Slip resistance)	-
5.3.4.2 (Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-
5.3.4.3 (Slip resistance on steel floor with glycerine )	-
5.3.4.4 (Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-
5.4.2.1 (Upper)	-
5.4.2.2 (Thickness )	-
5.4.2.3 (Tear strenth)	-
5.4.2.4 (Tensile properties)	-
5.4.2.5 (Flexing resistance )	-
5.4.2.6 (Water vapour permeability and coefficient )	-
5.5.2.1 (Tear strength )	-
5.5.2.2 (Abrasion resistance )	-
5.5.2.3 (Water vapour permeability and coefficient )	-
5.6 (Tongue )	-
5.6.2.1 (Tear strength )	-
5.7.2.1 (Insole and insock )	-
5.7.2.3 (Water absorption and desorption )	-
5.7.4.1 (Abrasion resistance )	-
5.7.4.2 (Abrasion resistance )	-
5.8.2.1 (Outsole)	-
5.8.1.1 (Thickness )	-
5.8.1.2 (Cleated area )	-
5.8.1.3 (Cleat height)	-
5.8.2.2 (Tear strength )	-
5.8.2.3 (Abrasion resistance )	-
5.8.2.4 (Flexing resistance )	-
5.8.2.6 (Interlayer bond strength )	-
6.2.2.1 (Conductive footwear)	-
6.2.2.2 (Antistatic footwear)	-
6.2.3.1 (Heat insulation of sole complex )	-
6.2.3.2 (Cold insulation of sole complex)	-
6.2.2.4 (Energy absorption of seat region )	-
6.2.2.5 (Water resistance )	-
6.3.2.2 (Upper- water penetration)	-
6.4.2.1 (Resistance to hot contact)	-

Partial

-
-

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.2 Table-2 (Height of upper)	-
5.2.3 Table-2 (Seat Region)	-
5.3.1.1 Table-2 (Construction)	-
5.3.1.2 Table-2 (Upper/Outsole Bond)	-
Table-2 (Strength)	-
5.3.2.1 Table-2 (General)	-
5.3.2.2 Table-2 (Internal Length of toe cap)	-
5.3.2.3 Table-2 (Impact Resistance -T- )	-
5.3.2.4 Table-2 (Compression)	-
5.3.2.5 Table-2 (Behaviour of toe cap)	-
5.3.3 Table-2 (Leak Proofness)	-
5.3.4 Table-2 (Specific Ergonomic)	-
Table-2 (Features)	-
5.3.5.2 Table-2 (Slip Resistance SRA)	-
5.3.5.3 Table-2 (Slip Resistance SRB)	-
5.3.5.4 Table-2 (Slip Resistance SRC)	-
5.4.1 Table-2 (General)	-
5.4.2 Table-2 (Thickness)	-
5 4 3 Table-2 (Tear Strength)	-
5.4.4 Table-2 (Tensile Properties)	-
5.4.5 Table-2 (Flexing Resistance)	-
5.4.6 Table-2 (Water Vapour Permeability & Coefficient)	-
5.5.1 Table-2 (Tear Strength)	-
5.5.2 Table-2 (Abrasion Resistance)	-
5.5.3 Table-2 (Water Vapour Permeability & Coefficient)	-
5.6.1 Table-2 (Tear Strength)	-
5.7.1 Table-3 (Thickness)	-
5.7.3 Table-3 (Water Absorption &)	-
5.7.4.1 Table-3 (Insole Abrasion)	-
5.7.4.2 Table-3 (Abrasion)	-
5.8.1 Table-2 (Design)	-
5.8.2 Table-2 (Tear Strength)	-
5.8.3 Table-3 (Abrasion Resistance)	-
5.8.4 Table-3 (Flexing Resistance)	-
5.8.6 Table-2 (Interlayer BondStrength)	-
6.2.2.1 Table-18 (Electrical Properties)	-
6.2.2.2 Table-18 (Antistatic Footwear)	-
6.2.3.1 Table-18 (Heat Insulated Comp)	-
6.2.3.2 Table-18 (Cold Insulated)	-
6.2.4 Table-18 (Energy Absorption of seat region)	-
6.2.5 Table-18 (Water Resistance)	-
6.2.6 Table-18 (Ankle Protection)	-
6.2.7 Table-18 (Cut Resistance)	-
6.3 Table-18 (Water Penetration & Absorption)	-
6.4.1 Table-18 (Resistance to Hot Contact)	-

Partial

-
-

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,Table 1 (Class I, IS 15298)	-
4,Table 1 (Class II, IS 15298)	-
5.2,5.2.1, Fig 3 (Design,General, IS 15298)	-
5.2.2, Fig 4 (Height of Upper, ISO 20344 , 6.2)	-
5.2.3, Table 10 ,Design A (Seat Region)	-
5.3.1.1 (Construction)	-
5.3.1.2 (Upper/outer sole bond strength , ISO 20344 , 5.2)	-
5.3.2.1 (General, EN 12568 OF 4.2.2.2)	-
5.3.2.2,Table 5 (Internal length of toecaps , ISO 20344 , 5.3)	-
5.3.2.3,Table 6 (Impact resistance of safety footwear,ISO 20344 , 5.4)	-
5.3.2.4 ,Table 6 (Compression Resistance of safety footwear ,ISO20344 , 5.5)	-
5.3.2.5.1 (Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-
5.3.2.5.2 (Non metallic toe caps ,EN 12568)	-
5.3.3 (Leak proofness ,ISO 20344 , 5.7)	-
5.3.4 (Specific ergonomic feature ,ISO 20344 , 5.1)	-
5.3.5.2,Table 7 (Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-
5.3.5.3,Table 8 (Slip resistance on steel floor with glycerin)	-
5.3.5.4 (Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-
5.3.6 (Innocuousness)	-
5.4.1,Table 10 (General)	-
5.4.2, Table 11 (Thickness , ISO 20344 , 6.1 )	-
5.4.3, Table 12 (Tear Strength, ISO 20344 , 6.3 )	-
5.4.4, Table 13 (Tensile properties ,ISO 20344 , 6.4.1 )	-
5.4.5, Table 14 (Flexing resistance ,ISO 20344,6.5)	-
5.4.6 (Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-
5.5.1,Table 15 (Tear Strength, ISO 20344 , 6.3)	-
5.5.2 (Abrasion Resistance ;ISO 20344 , 6.12)	-
5.5.3 (Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-
5.6 (Tongue - IS 15298 Part 2 )	-
5.6.1,Table 16 (Tear Strength, ISO 20344 , 6.3)	-
5.7.1;Table 3 (Thickness ; ISO 20344,7.1)	-
5.7.3 (Water Absorption and desorption ISO 20344,7.2 )	-
5.7.4.1 (Insole ; ISO 20344,7.3 )	-
5.7.4.2 (Insocks ; ISO 20344, 6.12)	-
5.8.1 (Design, IS 15298 Part 2 )	-
5.8.1.1, Table 17 (Thickness ; ISO 20344, 8.1.2)	-
5.8.1.2 (Cleated area ; ISO 20344 , Fig 38)	-
5.8.1.3, Table 17 (Cleat height; ISO 20344, 8.1)	-
5.8.2 (Tear Strength, ISO 20344 , 8.2)	-
5.8.3 (Abrasion Resistance ;ISO 20344 , 8.3)	-
5.8.4 (Flexing resistance ,ISO 20344,8.4)	-
5.8.6 (Interlayer bond strength; ISO 20344, 5.2)	-
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-
6.2.2.2 (Antistatic footwear ; ISO 20344,5.10)	-
6.2.3.1 (Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-
6.2.3.2 (Cold insulation of sole complex; ISO 20344,5.13)	-
6.2.4 (Energy absorption of seat region; ISO 20344,5.14)	-
6.2.5 (Water resistance ; 5.15.1 & 5.15.2)	-
6.2.6.1 (Construction)	-
6.2.6.2 , Table 19 (Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-
6.3 (Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-
6.4.1 (Resistance to hot contact ; ISO 20344 , 8.7)	-

Partial

-
-

IS 4684 (1975)

Specification for edible groundnut flour (Expeller Pressed) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.5 Table 1 (Acid-insoluble ash)	-
2.5 Table 1 (Acid value of extracted fat)	-
2.5 Table 1 (Total ash)	-
2.5 Table 1 (Crude fibre (on dry basis))	-
2.5 Table 1 (Moisture)	-
2.5 Table 1 (Fat ( on dry basis))	-
2.5 Table 1 (Protein)	-
2.2 (Description)	-
2.6 Table 2 (Coliform bacterial count)	-
2.6 Table 2 (Total bacterial count)	-
2.6 Table 2 (Salmonella bacteria)	-

Partial

-
-

IS 9359 (1995)

Pesticide - Phorate G encapsulated - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Constituents)	-
3.2.1 (Physical -Description)	-
3.2.2 (Physical - Sieving Requiremenr)	-
3.2.2.1 (ratio of lower to upper sieve sixes)	-
3.2.5 (Moisture Content)	-
3.3.1 (Phorate Content)	-
3.3.2 (Acidity)	-
3.2.4.2 (Encapsulation- The active ingredient in the water (%, by Mass))	-

Complete

-
-

IS 9356 (1980)

Specification for butachlor emulsifiable concentrates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.3 (Flash Point)	-
2.2.2 (Cold Test)	-
2.2.4 (Emulsion Stability)	-
2.2.1 (Description)	-
2.3.2 (Acidity)	-
2.3.1 (Butachlor Content, NV upto 9)	-
2.3.1 (Butachlor Content, NV above 9 below 50)	-
2.3.1 (Butachlor Content, NV above 50)	-
2.1.1 (Constituents)	-
2.2.2 (Cold Test)	-

Complete

-
-

IS 899 (1971)

Specification for tapioca sago (Saboodana) (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 Table 1 (Moisture)	-
3.5 Table 1 (Total ash)	-
3.5 Table 1 (Acid insoluble ash)	-
3.5 Table 1 (Starch)	-
3.5 Table 1 (Sulphur dioxide)	-
3.5 Table 1 (Crude fibre)	-
3.5 Table 1 (pH of aqueous extract)	-
3.1 (Description )	-
3.4 (Gelatinization)	-

Partial

-
-

IS 4467 (1996)

Caramel - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 1 plain)	-
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 2 Caustic sulphite)	-
6.1.2 Table 1 (Colour Intensity, Type 2 Caustic sulphite)	-
6.2.1 Table 2 (Total Nitrogen, Type 1 plain)	-
6.2.1 Table 2 (Mercury, all types)	-
6.1.2 Table 1 (Colour Intensity, Type 1 plain)	-
6.2.1 Table 2 (Sulphur dioxide, Type 2 Caustic sulphite)	-
6.2.1 Table 2 (Total Nitrogen, Type 2 Caustic sulphite)	-
6.2.1 Table 2 (Total Sulphur,Type 1 plain)	-
6.2.1 Table 2 (Total Sulphur, Type 3 ammonia process)	-
6.1.2 Table 1 (Colour Intensity, Type 3 ammonia process)	-
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 3 ammonia process)	-
6.1.2 Table 1 (Ammoniacal Nitrogen, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Sulphur dioxide, Type 4 sulphite ammonia)	-
6.1.2 Table 1 (Colour Intensity, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Total Sulphur, Type 2 Caustic sulphite)	-
6.1.2 Table 1 (Arsenic, all types)	-
6.1.2 Table 1 (Lead ( as Pb), all types)	-
6.2.1 Table 2 (Total Nitrogen, Type 3 ammonia process)	-
6.2.1 Table 2 (Total Nitrogen, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Total Sulphur, Type 4 sulphite ammonia)	-
6.2.1 Table 2 (Copper,all types)	-
6.2.1 Table 2 (Heavy Metals, all types)	-
6.1.2 Table 1 (solid Content, Type 2 Caustic sulphite)	-
6.1.2 Table 1 (solid Content, Type 4 sulphite ammonia)	-
6.1.2 Table 1 (solid Content, Type 1 plain)	-
6.1.2 Table 1 (solid Content, Type 3 ammonia process)	-
6.1.2 Table 1 (4-Methylimidazole, Type 4 sulphite ammonia)	-
6.1.2 Table 1 (4-Methylimidazole, Type 3 ammonia process)	-
6.1.1 (Description)	-
6.3 (Calclulation on Solid Basis)	-

Partial

-
-

IS 8707 (2013)

Mancozeb, technical - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table 1 (Mancozeb content)	-

Partial

-
-

IS 8291 (1976)

Specification for phenthoate emulsifiable concentrates

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point)	-
2.2.4 (Emulsion Stability)	-
2.3.1 (Phenthoate Content)	-
2.3.2 (Acidity/Alkalinity)	-

Complete

-
-

IS 8028 (1987)

Specification for quinalphos Be (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.3.2 (Acidity/Alkalinity)	-
2.2.4 (Emulsion Stability)	-

Complete

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Central Laboratory (CL)

20/9, Site 4, Sahibabad Industrial Area, Sahibabad, Ghaziabad, Ghaziabad, Uttar Pradesh, 201010

- [email protected]

Scope List