BIS - LIMS (Laboratory Information Management System)

Spectro Analytical Labs Private Limited

S-1, GNEPIP Surajpur Industrial Area, Kasna Phase V, Greater Noida, Gautam Buddha Nagar, Gautam Buddha Nagar, Uttar Pradesh, 201308

9873571512 [email protected]

Scope List

Reset

57 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2041 (2009)

Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	500	-
Cl 10(Length, Width & Thickness)	-	500	-
Cl 12.1(UTM)	-	500	-
Cl 12.2(Press)	-	500	-
Cl 12.3(Load Impact )	-	2500	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Carbon-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Silicon-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Manganese-IS228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Phosphorous-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Sulphur-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Aluminium-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R220, R260,R 275,R355,H 235,H265, H295,H355)(Nitrogen- IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Niobium)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Vanadium)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Titanium)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Vanadium+Niobium+ Titanium)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Chromium-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Copper-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Nickel-IS 228)	-	2000	-
Table 1,Cl.7.1 (Grade:- R 275,R355,H 235,H265, H295,H355)(Molybdenum-IS 228)	-	2000	-

Complete

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	5000	-
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	2500	-
2.2(SELV circuits)	-	2500	-
2.3(TNV circuits)	-	2500	-
2.4(Limited current circuits)	-	2500	-
2.5(Limited power sources .)	-	2500	-
2.6(Provisions for earthing and bonding)	-	2500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	2500	-
2.8(Safety interlocks)	-	2500	-
2.9(Electrical insulation)	-	2500	-
2.10(Clearances, creepage distances and distances through insulation)	-	2500	-
3.1(General)	-	100	-
3.2(Connection to a mains supply)	-	900	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	1000	-
4.2(Mechanical strength)	-	3000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.5(Thermal requirements)	-	15000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	10000	-
5.1(Touch current and protective conductor curren)	-	5000	-
5.2(Electric strength)	-	2000	-
5.3(Abnormal operating and fault conditions)	-	5000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	10000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	10000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	5000	-
7.1(General)	-	5000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	5000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	5000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	10000	-

Complete

-
-

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	500	-
Cl 10.3(UTM)	-	500	-
Cl 11.3(Press)	-	500	-
Cl 12(Sudden Load Applied)	-	2000	-
Cl 13(Y Groove Cracking Test)	-	1500	-
Cl 15(Length, Width & Thickness)	-	500	-
Cl 18(Weight)	-	200	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	500	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	500	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	500	-

Complete

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	500	-
Cl 10.2(Press)	-	500	-
Cl 11(Length, Width & Thickness)	-	500	-
6.1(Carbon %)	-	1500	-
6.1(Manganese %)	-	1500	-
6.1(Phosphorus %)	-	1500	-
6.1(Sulphur %)	-	1500	-
6.1(Silicon %)	-	1500	-
6.1( Copper %)	-	1500	-
6.1( Aluminium %)	-	1500	-
6.1( Nb)	-	1500	-
6.1(V)	-	1500	-
6.1( Ti)	-	1500	-
6.1(Cr)	-	1500	-
6.1(Mo)	-	1500	-
6.1(Ni)	-	1500	-
6.1( Nitrogen%)	-	1500	-
Cl. 10.2(Bend)	-	500	-
Cl 11(Length)	-	500	-
Cl. 10.3(Camber)	-	500	-
11(Width)	-	500	-
11(Thickness)	-	500	-
10.1 (a)(Macro-examination)	-	1000	-
10.1 (b)(Sulphur print)	-	1000	-

Complete

-
-

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9( FREEDOM FROM DEFECTS)	-	500	-
10.1.a)( Macro examination IS 11371)	-	1000	-
10.1.b)( Sulphur print tests IS 12037)	-	1000	-
11 & 12(DIMENSIONS and Tolerances)	-	500	-
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2500	-
11(Dimensions)	-	500	-
Cl. 11, 12 Table 3(Thickness )	-	500	-
Cl. 11, 12 Table 3(Width Across Flat)	-	500	-

Complete

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

- View breakup
Rs.45000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
Excluding: Photometric Test (Cl.17)

IS 16088 (2012)

Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification of pipes)	-	0	-
6.2.1(Compound Chlorine content)	-	0	-
7(Dimension of Pipes: )	-	500	-
7.1.1 IS 12235 (Part 1) Table 1(Mean outside Diameter)	-	500	-
7.1.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point)	-	500	-
7.1.2 IS 12235 (Part 1) Table 1(Wall Thickness )	-	500	-
9.2(Opacity)	-	2000	-
9.3(Reversion test : )	-	2000	-
9.4(Vicat Softening Temperature)	-	1500	-
9.5(Density)	-	500	-
9.6(Fire Exposure )	-	150000	-
9.7(Flammability)	-	10000	-
10.1 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	35000	-
10.2(Resistance to external blows)	-	2500	-
10.3(Flattening)	-	5000	-
10.4(Tensile Strength)	-	1000	-
10.5(Kinking Resistance test)	-	2000	-

Complete

-
-

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	1500	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	500	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1000	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	500	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	2000	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	2000	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	500	-
7.2(Uniformity Requirements)	-	500	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2000	-

Complete

-
-

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	1500	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	500	-
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	500	-
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	500	-
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	500	-
5.1, 6.1, Table 1(Total chlorides)	-	500	-
6.2(moisture content)	-	500	-
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1500	-
7.1, Table 1(Soundnes)	-	1000	-
7.2(Uniformity Requirements)	-	500	-
8.3(Independent Testing)	-	500	-
11.1(Supplies of pulverized fuel)	-	500	-
11.2(Tolerance Requirements for the Quantity of Pulverized Fuel Ash Packed in Bags)	-	500	-
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	500	-
5.1, 6.1, Table 1(Loss on ignition)	-	500	-

Complete

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

- View breakup
Rs.40000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 14246 (2013)

Continuously pre-painted galvanized steel sheets and coils (First Revision)

38200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	0	-
Cl 4.2(Workmanship)	-	0	-
Cl 4.3(Workmanship)	-	500	-
Cl 6.2(Press)	-	500	-
Cl 6.3(HWB)	-	500	*HWB INCORRECT , CLAUSE 6.3 PENCIL HARDNESS
Cl 6.4(Load Resistance)	-	1000	-
Cl 6.5(Cross Hatch)	-	500	-
Cl 8(Salt Spray)	-	35000	-
Cl 9(Length, Width, Thickness & Mass)	-	500	-
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	500	-

Complete

-
-

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2, Table 3(Tensile Test-1608:Part 1)	-	500	-
8.2, Table 3(Proof Stress, N/mm2)	-	500	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	500	-
8.4(Bend Test)	-	500	-
8.5(Erichsen Cupping Test)	-	1000	-
10.1(Thickness, mm)	-	1000	-
10.2(width, mm)	-	1000	-
10.3(Length, mm)	-	1000	-
10.4(Flatness,mm)	-	500	-
10.5(Camber, mm)	-	500	-
11(Surface Finish)	-	500	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl . 6 .0(Freedom from defect)	-	500	-

Complete

-
-

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Lead Restriction)	-	1000	-
Cl 4.3, Table 1, S.no. i)(Drying time, Hard dry)	-	300	-
Cl 4.3, Table 1, S.no. ii)(Consistency)	-	300	-
Cl 4.3, Table 1, S.no. iii)(Finish)	-	200	-
Cl 4.3, Table 1, S.no. iv)(Wet opacity)	-	300	-
Cl 4.3, Table 1, S.no. v)(Colour)	-	200	-
Cl 4.3, Table 1, S.no. vi)( Mass)	-	200	-
Cl 4.3, Table 1, S.no. vii)(Water content)	-	500	-
Cl 4.3, Table 1, S.no.viii)(Flexibility and adhesion)	-	1000	-
Cl 4.3, Table 1, S.no. ix)(Stripping test )	-	300	-
Cl 4.3, Table 1, S.no. x)(Protection against corrosion under conditions of condensation)	-	1000	-
Cl 4.3, Table 1, S.no.xi)(Volatile matter, perce)	-	300	-
Cl 4.3, Table 1, S.no.xii)(Resistance to acid)	-	300	-
Cl 4.3, Table 1, S.no.xiii)(Resistance to alkali)	-	300	-
Cl 4.3, Table 1, S.no.xiv)(Resistance to Heat)	-	300	-
Cl 4.3, Table 1, S.no.xv)(Flash point ,)	-	300	-
Cl 4.3, Table 1, S.no.xvi)(Keeping properties)	-	10000	-

Complete

-
-

IS 164 (2015)

Ready mixed paint for road marking - Specification (Second Revision)

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Application)	-	2000	-
Cl 5.3(Durability)	-	2000	-
Cl. 5.4(Lead Restriction)	-	1000	-
Cl 5.5, Table 1, S.no. i)(Drying time, a) Surface dry)	-	250	-
Cl 5.5, Table 1, S.no. i)(Drying time, b) Hard dry)	-	250	-
Cl 5.5, Table 1, S.no. ii)(Consistency)	-	500	-
Cl 5.5, Table 1, S.no. iii)(Finish)	-	300	-
Cl 5.5, Table 1, S.no. iv)(Colour)	-	300	-
Cl 5.5, Table 1, S.no. v)(Wet opacity)	-	1000	-
Cl 5.5, Table 1, S.no. vi)(Resistance to bleeding)	-	2000	-
Cl 5.5, Table 1, S.no. vii)(Recoating property)	-	2000	-
Cl 5.5, Table 1, S.no. viii)(Resistance to wear: a) For Grade 1)	-	2000	-
Cl 5.5, Table 1, S.no. viii)(Resistance to wear: a) For Grade 2)	-	2000	-
Cl 5.5, Table 1, S.no. ix)(Residue on sieve)	-	2000	-
Cl 5.5, Table 1, S.no. x)(Flash point )	-	500	-
Cl 5.5, Table 1, S.no. xi)(xi) Mass)	-	300	-
Cl 5.5, Table 1, S.no. xii)(Keeping properties)	-	10000	-
Cl 5.6 & Cl 5.6.2.1(Optional Requirement for ECO-Mark, volatile organic compounds,)	-	2000	-
5.6.2.2( Optional Requirement for ECO-Marktoxic metals such as cadmium, chromium (VI) and their compounds)	-	2000	-

Complete

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	1000	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 ii a(Expansion after aeration)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 i.(Fineness)	-	1500	-
6.1 Table-2 viii(Alkali content)	-	500	-
6.1 Table-2 vii(Chloride content)	-	500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 iv(Magnesia)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-

Complete

-
-

IS 455 (2015)

Portland slag cement - Specification

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	1000	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	1000	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	1000	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	500	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	500	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	1500	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	500	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	500	-

Complete

-
-

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	3000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	1000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	1000	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- i(Fineness 4031 Part 2)	-	1500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-

Complete

-
-

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	1000	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	1000	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	3000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	-

Complete

-
-

IS 8042 (2015)

White portland cement - Specification (Third Revision)

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1000	-
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	500	-
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1000	-
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	500	-
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	500	-
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	3000	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	500	-

Complete

-
-

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

Upto 200 mm Dia

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6, 6.1(PIPE DESCRIPTION)	-	500	-
7.4 table -3 & 4(6.1 Dimensions)	-	500	-
8.2(Longitudinal Reversion Test)	-	2000	-
8.4( Melt Flow Rate)	-	2000	-
8.5 (Oxidation Induction Time)	-	5000	-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1000	-
8.9 table-6(Elongation at Break)	-	1000	-
8.1(Slow Crack Growth Rate)	-	20000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	20000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	20000	-

Complete

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

68000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	1000	-
6(Hazardous radiations)	-	5000	-
7(Heating under normal operating conditions)	-	10000	-
8(Constructional requirements with regard to the protection against electric shock)	-	10000	-
9(Electric shock hazard under normal operating conditions)	-	7000	-
10(Insulation requirements)	-	20000	-
11(Fault conditions)	-	5000	-
12(Mechanical strength)	-	23000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	-
14(Components)	-	5000	-
15(TERMINALS)	-	2000	-
16(External flexible cords)	-	5000	-
17(Electrical connections and mechanical fixings)	-	3000	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	1000	-
19(Stability and mechanical hazards)	-	5000	-
20(Resistance to fire)	-	10000	-

Complete

-
-

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	500	-
Cl 9(Press)	-	500	-
Cl 10(Die Press)	-	1000	-
Cl 12(Workmanship)	-	500	-
Cl 13(Length, Width & Thickness)	-	1200	-
6.1(Carbon %)	-	1500	-
6.1(Manganese %)	-	1500	-
6.1(Phosphorus %)	-	1500	-
6.1(Sulphur %)	-	1500	-
6.1(Silicon %)	-	1500	-
6.1( Copper %)	-	1500	-
6.1( Aluminium %)	-	1500	-
6.1( Nb)	-	1500	-
6.1(V)	-	1500	-
6.1( Ti)	-	1500	-
6.1(Cr)	-	1500	-
6.1(Mo)	-	1500	-
6.1(Ni)	-	1500	-
6.1( Nitrogen%)	-	1500	-
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	-
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	-
14(Calculation of weight)	-	500	-

Complete

-
-

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	500	-
Cl 9(Press)	-	500	-
Cl 10(Sudden Load Applied)	-	2500	-
Cl 11(Expansion Test)	-	3500	-
Cl 13(Workmanship)	-	500	-
Cl 14(Weldability)	-	500	-
Cl 15(Length, Width & Thickness)	-	500	-
7.1(Carbon %)	-	1500	-
7.1(Manganese %)	-	1500	-
7.1(Phosphorus %)	-	1500	-
7.1(Sulphur %)	-	1500	-
7.1(Silicon %)	-	1500	-
7.1( Copper %)	-	1500	-
7.1( Aluminium %)	-	1500	-
7.1( Nb)	-	1500	-
7.1(V)	-	1500	-
7.1( Ti)	-	1500	-
7.1(Cr)	-	1500	-
7.1(Mo)	-	1500	-
7.1(Ni)	-	1500	-
7.1( Nitrogen%)	-	1500	-
7.1(CE)	-	1500	-

Complete

-
-

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

6700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	na
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	na
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	na
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	na
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	na
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	na
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	na
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	NA
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	NA
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	NA
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	NA
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	NA
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	NA
6(Freedom from defects , IS 6911)	-	500	NA
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	500	NA
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	500	NA
10.3(Bend Test - IS 1599)	-	500	NA
11,Table 7(Erichsen cupping test-IS 10175)	-	1000	NA
15(Surface Finish)	-	500	NA
17(Dimension and tolerance)	-	500	NA
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	3000	-
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	3000	-

Complete

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

- View breakup
Rs.40000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	500	-
Cl 8.2(Press)	-	1000	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	1000	-
Cl 13(Weight)	-	500	-
Cl 14(Length, Width & Thickness)	-	500	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	500	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	500	-
5.1(phosphorus)	-	1500	-
5.1(aluminium)	-	1500	-
5.1(manganese)	-	1500	-
5.1(carbon)	-	1500	-
5.1(sulphur)	-	1500	-
5.1(Titanium)	-	1500	-
5.1(micro alloy)	-	1500	-
Cl. 17(Marking )	-	0	-
5.1(carbon)	-	1500	-
5.1(manganese)	-	1500	-
5.1(sulphur)	-	1500	-
5.1(phosphorus)	-	1500	-
5.1(aluminium)	-	1500	-
5.1(silicon )	-	1500	-
5.1(nitrogen)	-	1500	-
5.1(copper)	-	1500	-
5.1(micro alloy)	-	1500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	1500	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	1500	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	1500	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	1500	-

Complete

-
-

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9 (Dimensions & tolerances)()	-	500	-
Table-1,(Clauses 5.1 and 7.2)(Carbon)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Sulphor)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Phosphorous)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Manganese)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Silicon)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Aluminium)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Chromium)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Nickel)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Molybdenum)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Copper)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Boron)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Vanadium)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Titanium)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(Nitrogen)	-	1500	-
Table-1,(Clauses 5.1 and 7.2)(S+P)	-	1500	-
9(Dimesion (Diameter))	-	500	-
9(Dimesion (Out of Roundness))	-	500	-
10(Mechanical Properties (Tensile strength))	-	500	-
10(Mechanical Properties (Reduction in Area))	-	500	-
12(Surface Defects)	-	500	-
13(Decarburization Test)	-	1000	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thin, worse))	-	1000	-
14(Type B (Alumina Type) (Thin, worse))	-	1000	-
14(Type C (Silicate Type) (Thin, worse))	-	1000	-
14(Type D( Globular Oxide Type ) (Thin, worse))	-	1000	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thin, Mean))	-	1000	-
14(Type C (Silicate Type) (Thin, Mean))	-	1000	-
14(Type D( Globular Oxide Type ) (Thin, Mean))	-	1000	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thick, worse))	-	1000	-
14(Type B (Alumina Type) (Thick, worse))	-	1000	-
14(Type C (Silicate Type) (Thick, worse))	-	1000	-
14(Type D( Globular Oxide Type ) (Thick, worse))	-	1000	-
16(Axial Segregation (Optional))	-	2000	-
14(Type B (Alumina Type) (Thin, Mean))	-	1000	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thick, Mean))	-	1000	-
14(Type B (Alumina Type) (Thick, Mean))	-	1000	-
14(Type C (Silicate Type) (Thick, Mean))	-	1000	-
14(Type D( Globular Oxide Type ) (Thick, Mean))	-	1000	-
15(Microstructure)	-	2000	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Spectro Analytical Labs Private Limited

S-1, GNEPIP Surajpur Industrial Area, Kasna Phase V, Greater Noida, Gautam Buddha Nagar, Gautam Buddha Nagar, Uttar Pradesh, 201308

9873571512 [email protected]

Scope List

No Record Found

No Record Found

No Record Found