BIS - LIMS (Laboratory Information Management System)

Spectro Analytical Labs Private Limited

S-1, GNEPIP Surajpur Industrial Area, Kasna Phase V, Greater Noida, Gautam Buddha Nagar, Gautam Buddha Nagar, Uttar Pradesh, 201308

9873571512 [email protected]

Scope List

Reset

57 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	10000		-
5.2(Message Readability)	-	15000		-

Complete

-
-

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	10000	-
4.6(Power interface)	-	10000	-
4.7(Marking & instructions)	-	1000	-
5.1(Protection against shock and energy hazards)	-	5000	-
5.2(Requirement of auxiliary circuits)	-	10000	-
5.3(Protective earthing and bonding)	-	6000	-
5.4(AC and DC power isolation)	-	10000	-
5.5(Over current and earth fault condition)	-	5000	-
5.6(Safety interlocks)	-	5000	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
6.1(Wiring, connections and supply)	-	2000	-
6.2(Connection to power)	-	6000	-
6.3(Wiring terminals for external power conductors)	-	5000	-
7.1(Enclosure)	-	2000	-
7.2(STABILITY)	-	5000	-
7.3(MECHANICAL STRENGTH)	-	5000	-
7.4(Construction details)	-	13000	-
7.5(Resistance to fire)	-	10000	-
7.6(Battery location)	-	5000	-
7.7(Temperature rise)	-	5000	-
8.1(General procision for earth leakage)	-	2000	-
8.2(Electric Strength)	-	2000	-
8.3(Abnormal operating and fault conditions)	-	2000	-
9.0(Connection to telecommunication networks)	-	2000	-

Complete

-
-

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1000	N/A
5(General Safety Considerations)	-	500	N/A
5.1(General)	-	500	N/A
5.2(Insulation and Wiring)	-	1000	N/A
5.3(Venting)	-	1000	N/A
5.4(Temperature, Voltage and Current Management)	-	1000	N/A
5.5(Terminal Contacts)	-	1000	N/A
5.6(Assembly of Cells into batteries)	-	2000	N/A
5.7(Quality Plan)	-	1000	N/A
5.8(Battery Safety Components)	-	1000	N/A
6(Tyoe Test amd Sample Size)	-	1000	N/A
7(Specific requirements and tests)	-	1000	N/A
7.1(Charging procedure for test purposes)	-	9000	N/A
7.2(Intended Use)	-	15000	N/A
7.3(Reasonably foreseeable misuse)	-	35000	N/A
8(Information for safety)	-	1000	N/A
8.1(General)	-	4000	N/A
8.2(Small Cell and battery safety information)	-	5000	N/A
9(Marking)	-	1000	N/A
9.1(Cell Marking)	-	2000	N/A
9.2(Battery Marking)	-	2000	N/A
9.3(Caution for ingestion of small cells and batteries)	-	3000	N/A
9.4(Other information)	-	2000	N/A
10(Packaging)	-	5000	N/A

Complete

-
-

IS 16046 : Part 1 (2018)

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1000	N/A
5(General Safety Considerations)	-	500	N/A
5.1(General)	-	500	N/A
5.2(Insulation and Wiring)	-	1000	N/A
5.3(Venting)	-	1000	N/A
5.4(Temperature, Voltage and Current Management)	-	1000	N/A
5.5(Terminal Contacts)	-	1000	N/A
5.6(Assembly of Cells into batteries)	-	2000	N/A
5.7(Quality Plan)	-	1000	N/A
6(Tyoe Test amd Sample Size)	-	1000	N/A
7(Specific requirements and tests)	-	1000	N/A
7.1(Charging procedure for test purposes)	-	9000	N/A
7.2(Intended Use)	-	25000	N/A
7.3(Reasonably foreseeable misuse)	-	30000	N/A
8(Information for safety)	-	1000	N/A
8.1(General)	-	4000	N/A
8.2(Small Cell and battery safety information)	-	5000	N/A
9(Marking)	-	1000	N/A
9.1(Cell Marking)	-	2000	N/A
9.2(Battery Marking)	-	2000	N/A
9.3(Caution for ingestion of small cells and batteries)	-	3000	N/A
9.4(Other information)	-	2000	N/A
10(Packaging)	-	5000	N/A

Complete

-
-

IS 16014 (2018)

Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision)

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(MATERIALS AND MANUFACTURE)	-	500	-
5.4.1(Galvanized Rings)	-	500	-
5.4.2(Stainless Steel Fasteners)	-	500	-
6.1(Tensile Strength)	-	500	-
6.2,Table7,i(Mesh wire dia)	-	500	-
6.2,Table7,ii(Tensile Strength Parallel to twist)	-	500	-
6.2,Table7,iii(Tensile Strength Perpendicular to twist)	-	500	-
6.2,Table7,iv(Selvedge Strength)	-	500	-
6.2,Table7,v(Punch Strength)	-	1000	-
6.2,Table7,vi(Panel to panel connection (lacing wire/fasteners))	-	500	-
7.1.1(Mass of Zinc Coating )	-	500	-
7.1.3(Ageing and Corrosion Resistance)	-	500	-
7.2,a(Specific gravity-IS13360 (Part 3/ Sec 10, 11 and 12))	-	500	-
7.2,b(Tensile strength- IS 13360 (Part 5/Sec 1))	-	500	-
7.2,c(Hardness-IS 13360 (Part 5/Sec 11))	-	500	-
7.2,d(As per IS 7.2,d of IS 16014)	-	500	-
7.2,e(Salt spray exposure-IS 13360 (Part 8/Sec 14))	-	30000	-
7.2,f(Modulus of Elasticity -ISO 37)	-	2000	-
7.2,g(Brittleness Temperature-ISO 974)	-	500	-
8.1,Table1,2,3,4,5,6,iv(Polymer coating thickness,)	-	1000	-
7.2,h(Resistance to UV rays-ISO 4892-3)	-	125000	-

Complete

-
-

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	500	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	1000	-
11(Surface finish)	-	1000	-
12(Dimensions)	-	1000	-
14.1(Thickness,mm)	-	1000	-
14.2( Width, mm)	-	1000	-
14.3(Length, mm)	-	1000	-
14.4(Flatness, mm)	-	500	-
14.5(Camber, mm)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
9.3, Table 3 (Tensile Strength, Mpa)	-	500	-
9.3, Table 3 (Elongation, %)	-	500	-

Complete

-
-

IS 15965 (2012)

Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)

72500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	500	-
Cl 8.3.1(Adhesion )	-	500	-
Cl 8.3.2(Impact Resistance)	-	1000	-
Cl 8.4(Load Resistance)	-	500	-
Cl 8.5(Scratch Resistance)	-	500	-
Cl 8.7(Dry Film Thickness)	-	200	-
Cl 9.1(Workmanship)	-	500	-
Cl 10.1(Corrosion Test)	-	35000	-
Cl 10.2(Humidity Test)	-	45000	-
Cl 11(Length, Width & Thickness)	-	500	-
Cl 12(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	500	-
Cl 12(Weight)	-	500	-
8.6(Solvent Resistance test)	-	500	-
9.3(Gloss (60 Deg))	-	300	-
9.2(colour)	-	200	-

Complete

-
-

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	500	-
Cl 10(Coating Adhesion )	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 12(Weight)	-	500	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	500	-
Cl 9 & Table 2(Workmanship)	-	500	-
Cl. 13.3(Width)	-	500	-
Cl. 13.4(Thickness)	-	500	-
Cl. 13.5(Camber)	-	500	-
Cl. 13.6(Deviation from Squareness (Out of Square))	-	500	-
Cl. 13.7(Deviation from Flatness (Steepness))	-	500	-
4, 5(CARBON)	-	1500	-
4, 5(SULPHUR)	-	1500	-
4, 5(PHOSPHURS)	-	1500	-
4.5(MANGANESE)	-	1500	-
4, 5(NITROGEN)	-	1500	-
4, 5(SILICON)	-	1500	-
4, 5(ALUMINIUM)	-	1500	-

Complete

-
-

IS 2266 (2019)

Steel wire ropes for general engineering purpose - Specification (Fifth Revision)

upto 32 mm

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 8.2(Grade-1, Table-1, IS 1835:1976, Carbon)	-	300	Testing Charges for Carbon is INR 300 Complete Chemical Composition Charges INR 1500 + GST
Clause 8.2(Manganese)	-	300	Testing Charges for Manganese is INR 300,Complete Chemical Composition Charges INR 1500 + GST
Clause 8.2(Silicon)	-	300	Testing Charges for Silicon is INR 300 Complete Chemical Composition Charges INR 1500 + GST
Clause 8.2(Sulphur)	-	300	Testing Charges for Sulphur is INR 300 Complete Chemical Composition Charges INR 1500 + GST
Clause 8.2(Phosphorus)	-	300	Testing Charges for Phosphorus is INR 300 Complete Chemical Composition Charges INR 1500 + GST
4(Rope Size and Tolerance )	-	300	NA
5(Minimum Breaking Force)	-	500	NA
10(Galvanizing)	-	500	NA
12(a) Size)	-	300	NA
12(d) lay)	-	300	NA
6(General Requirements)	-	500	NA
Clause 8.2(Nickel)	-	1500	-
Clause 8.2(Chromium)	-	1500	-
Clause 8.2(Copper)	-	1500	-
Clause 8.2(Phosphorus+ Sulphur)	-	1500	-
12(b) Construction)	-	500	-
8.2(Steel Core)	-	500	-
9(Joints)	-	500	-

Complete

-
-

IS 2074 (2015)

Ready mixed paint, air drying, red oxide - Zinc chrome, priming - Specification (Third Revision)

17600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	800	-
Cl 5.1 (b)(Composition, Driers)	-	800	-
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	800	-
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	800	-
Cl 5.1 .1 (c)(Suitable extenders)	-	800	-
Cl 5.1.2(Volatile vehicle)	-	1500	-
Cl 5.2(Material)	-	1000	-
Cl 5.3(Compatibility with Thinner, IS 1872)	-	500	-
Cl 5.4(Freedom from Objectionable Impurities)	-	1000	-
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	500	-
1 (i) (a) Table 1(Consistency, Annex C)	-	300	-
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	500	-
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	300	-
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	300	-
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	300	-
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	200	-
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	500	-
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	300	-
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	300	-
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	300	-
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	300	-
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	500	-
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	500	-
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	500	-
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	500	-
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	500	-
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	500	-
1 (xii) Table 1(Keeping properties, IS 101 (Part 6/Sec 2))	-	10000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-	10000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)])	-	10000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 4. Observation of dried film [Cl.3.4, table 1 of IS 101 (Part 6/Sec 2)])	-	10000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 3. Degree of settling [Cl.3.3, table 2 of IS 101 (Part 6/Sec 2)])	-	10000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 2. Change in skinning [Cl.3.2, table 2 of IS 101 (Part 6/Sec 2)]v)	-	10000	-

Complete

-
-

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

3700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	500	-
Cl 6.1(Diameter)	-	500	-
Cl 6.2(Weight)	-	500	-
Cl 8(Physical Requirements)	-	1000	-
Cl 9.3(Press)	-	500	9.3 - BEND TEST
Clause -4, 4.1( CARBON)	-	1500	-
Clause -4, 4.1(SULPHUR)	-	1500	-
Clause -4, 4.1(PHOSPHURS)	-	1500	-
Clause -4, 4.1(MANGANESE)	-	1500	-
Clause -4, 4.1(NITROGEN)	-	1500	-
Clause -4, 4.1(SILICON)	-	1500	-
Clause -4, 4.1( ALUMINIUM)	-	1500	-
Clause -4, 4.1(Nickel)	-	1500	-
Clause -4, 4.1(Chromium)	-	1500	-
Clause -4, 4.1(Molybdenum)	-	1500	-
Clause -4, 4.1(NIOBIUM)	-	1500	-
Clause -4, 4.2(VANADIUM)	-	1500	-
Clause -4, 4.3(TITANIUM)	-	1500	-
Clause 8.1(Elongation)	-	1000	-
Clause 8.1(Yield Stress)	-	1000	-
Cl 8.2(Bend test)	-	500	-

Complete

-
-

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	500	-
Cl 5 & 6(Diameter)	-	500	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	2000	-
Clause 3.1.1(Sulphur)	-	1500	-
Clause 3.1.1(Phosphorus)	-	1500	-
Cl. 7.1(Proof Stress 0.2 %)	-	1000	-
Cl. 7.1(Elongation)	-	1000	-
Cl. 6.2(Length)	-	500	-
Clause 3(Nitrogen)	-	1500	-

Complete

-
-

IS 2185 : Part 2 (1983)

Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision)

14600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Moisture Movement)	-	2000	-
8.6(Drying shrinkage)	-	6000	-
8.5, Table 1(Water Absorption)	-	2000	-
8.4, Table 1(Compressive strength)	-	3000	-
8.3(Block Density)	-	2500	-
3.2.5(Thickness of Web)	-	1500	-
3.2.5(Face Shell Thickness)	-	1500	-
3.2(Width)	-	800	-
3.2(Height)	-	800	-
3.2(Length)	-	800	-
8.1(General)	-	500	-
8.2(Deimension (Length))	-	800	-
8.2(Deimension (Height))	-	800	-
8.2(Deimension (Width))	-	800	-

Complete

-
-

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	500	-
8.2(Physical requirments-Dimensions-Length)	-	500	-
8.2(Physical requirments-Dimensions-Height)	-	500	-
8.2(Physical requirments-Dimensions-Width)	-	500	-
8.3(Physical requirments- Block density)	-	1500	-
8.4(Physical requirments- Compressive strength)	-	2000	-
8.5(Thermal Conductivity)	-	18000	-
8.6( Drying Shrinkage )	-	2500	-

Complete

-
-

IS 44 (1991)

Iron oxide pigments for paints - Specification (Second Revision)

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3 Table-1 i.(Volatile matter - 7 of IS 33)	-	300	-
5.3 Table-1 ii.(Residue on sieve - 8 of IS 33)	-	500	-
5.3 Table-1 iii.(Oil absorption - 9 of IS 33)	-	500	-
5.3 Table-1 iv (a)(Colour staining power)	-	300	-
5.3 Table-1 iv (b)(Colour undertone)	-	300	-
5.3 Table-1 v.(Matter insoluble in water - 17 of IS 33)	-	500	-
5.3 Table-1 vi.(Sum of water soluble Chloride - Annex-A)	-	1000	-
5.3 Table-1 vii.(Acidity or Alkalinity - 18 of IS 33)	-	1000	-
5.3 Table-1 viii.(pH of aqueous extract)	-	500	-
5.3 Table-1 ix.(Total Iron - Annex-B)	-	500	-
5.3 Table-1 x.(Ferrous Iron - Annex-C)	-	500	-
5.3 Table-1 xi.(Carbonates - Annex-D)	-	500	-
5.3 Table-1 xii.(Calcium compounds - Annex-E)	-	500	-
5.3 Table-1 xiii.(Manganese Content - Annex-F)	-	500	-
5.3 Table-1 xiv.(Loss on ignition - Annex-G)	-	300	-
5.4(Lead Free Material - 25 of IS 33)	-	500	-

Complete

-
-

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

6800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	500	NA
Cl 8(Diameter, Ovality & Weight)	-	500	NA
Cl 9(UTM & HBW)	-	1000	Tensile Properties and hardness
Cl 12(Supplementary Requirements)	-	7500	NA
6.1, 6.2(carbon)	-	1500	-
6.1, 6.2(silicon )	-	1500	-
6.1, 6.2(manganese)	-	1500	-
6.1, 6.2(sulphur)	-	1500	-
6.1, 6.2(phosphorus)	-	1500	-
6.1, 6.2(aluminium)	-	1500	-
7(Freedom from defects)	-	500	-
8(Dimensional Properties (Diameter))	-	500	-
8(Dimensional Properties (Ovality))	-	500	-
8(Dimensional Properties (Weight per Meter, kg))	-	500	-
9.1, table 2(Tensile Strength)	-	500	-
9.1, table 2(Yield Strength)	-	500	-
9.1, table 2(Elongation)	-	500	-
9.2, table 2(hardness test)	-	500	-
12.2(Bend Test)	-	500	-
12.3(grain size)	-	1000	-
12.4(Macrostructure)	-	1000	-
12.5(Ultrasonic Test)	-	500	-
12.6(Magnetic Particle Test)	-	500	-
12.7(Blue Fracture Test)	-	2000	-
6.1, 6.2(nickel)	-	1500	-
6.1, 6.2(cromium)	-	1500	-
6.1, 6.2(copper)	-	1500	-
6.1, 6.2(molybdenum)	-	1500	-
6.1, 6.2(vanadium)	-	1500	-
6.1, 6.2(boron)	-	1500	-
6.1, 6.2(tin)	-	1500	-

Complete

-
-

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	2500	-
Cl 7(Diameter & Out Of Round)	-	500	-
Cl 8(Decarburization)	-	500	-
Cl 9(Inclusion)	-	500	-
Cl 10(Hardenability)	-	500	-
Cl 11(Size)	-	1000	-

Complete

-
-

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

1800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	-
Cl 9(Nominal Diameter & Out Of Shape)	-	200	-
6.1( Aluminium %)	-	1500	-
6.1(Silicon %)	-	1500	-
6.1(Sulphur %)	-	1500	-
6.1(Phosphorus %)	-	1500	-
6.1(Manganese %)	-	1500	-
6.1(Carbon %)	-	1500	-

Complete

-
-

IS 1891 : Part 1 (1994)

Conveyor and elevator textile belting - Specification: Part 1 general purpose belting (Fourth Revision)

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Cover tensile strength)	-	1000	-
7.1(Cover Elongation at break)	-	1000	-
7.2(Thickness)	-	500	-
7.3(Cover tensile strength heat Ageing)	-	1000	-
7.3(Cover Elongation at break heat Ageing)	-	1000	-
7.4(Rubber cover abrasion)	-	2000	-
8.1(Cover Thickness)	-	500	-
8.2(Carcass Thickness)	-	500	-
13.1(Length)	-	500	-
13.2(Width)	-	500	-
14.1(Full thickness breaking strength)	-	2000	-
14.2.1(Elongation at reference load)	-	1000	-
14.2.2(Elongation at breaking load)	-	1000	-
15(Adhesion)	-	7000	-
16(Troughability)	-	5000	-

Complete

-
-

IS 5504 (1997)

Specification for spiral welded pipes (First Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Tensile Test)	-	500	-
6.3/6.3.1.1(Submerged Arc Weld Test- Guided bend test)	-	2000	-
8.1(Length)	-	2000	-
8.2(Dimensions)	-	2000	-
9/9.1(Finish)	-	0	-
Cl. 5.1(Carbon)	-	1500	-
Cl. 5.1(Sulphur)	-	1500	-
Cl. 5.1(Phosphorus)	-	1500	-
6.2(Flattening Test)	-	2000	-

Complete

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

1800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	300	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	300	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	300	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	300	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	500	-
Cl 5.4 Table 1 (iv)(Chloride)	-	300	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	-
Cl 5.4 .2(pH)	-	200	-

Complete

-
-

IS 4521 (2001)

Wire ropes used in oil wells and oil well drilling - Specification (Second Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 (tables 1 to 10)(Size)	-	1000	-
5 (tables 1 to 10)(Minimum Breaking Force)	-	500	-
6.2(Core)	-	500	-
6.3(Joints)	-	500	-
6.4(Mass)	-	500	-
6.5(Lay of the Rope)	-	500	-
6.6(Length of Lay)	-	500	-
7(Galvanizing)	-	500	-
8(Lubrication)	-	500	-

Complete

-
-

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirements)	-	500	-
3.2(General Requirements)	-	500	-
3.3(General Requirements)	-	500	-
3.4(General Requirements)	-	500	-
3.5(General Requirements)	-	500	-
5.1(Dimensions)	-	500	-
7.1, Table -1(Average Wet Compressive Strength)	-	1000	-
7.2(Drying Shrinkage)	-	2000	-
7.3(Efflorescence Test)	-	1000	-
7.4(Water Absorption)	-	1000	-

Complete

-
-

IS 1856 (2005)

Steel wire ropes for haulage purposes - Specification (Third Revision)

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4- Tables 1 to 4(Diameter)	-	300	-
5- Tables 1 to 4(Breakiing Force of Rope with Fiber Core)	-	500	-
6.2.1(Joints)	-	1500	-
6.3(Lay)	-	500	-
6.4- Tables 1 to 4(Mass of Rope with Steel core)	-	500	-
7(Uniformity of Znic coating - IS 1835 & IS 2366)	-	500	-
7(Mass of Znic Coating - IS 1835 & IS 6745)	-	500	-
5- Tables 1 to 4(Breakiing Force of Rope with Steel Core)	-	500	-

Complete

-
-

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

14600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	500	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	1000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	1500	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	2000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	4000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	2500	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	5000	-
15(Marking)	-	500	-

Complete

-
-

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	-
Cl 9(Tensile Test On UTM)	-	500	-
Cl 11(Workmanship)	-	500	-
Cl 13(Workmanship)	-	500	-
6 AND AS PER IS 7887(CARBON)	-	1500	-
6 AND AS PER IS 7887(SILICON)	-	1500	-
6 AND AS PER IS 7887(MANGANESE)	-	1500	-
6 AND AS PER IS 7887(SULPHUR)	-	1500	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	1500	-
6 AND AS PER IS 7887(ALUMINIUM)	-	1500	-
13(Freedom from defects)	-	500	-
11(Coating test)	-	500	-
9.2(Wrapping Test)	-	800	-
9.3(Bend test)	-	500	-
10(Finish)	-	500	-
7 & 8(Diameter)	-	500	-

Complete

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

15100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	200	NA
6.1.3(Physical requirement)	-	1000	ONLY FOR TWO LAYRED SPECIMEN
6.2.1 & 7.1(VISUAL INSPECTION)	-	200	NA
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	200	NA
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	200	NA
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	200	NA
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	200	NA
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	200	NA
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	200	NA
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	200	NA
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	200	NA
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	200	NA
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	200	NA
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	500	NA
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	200	NA
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	500	NA
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	200	NA
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	500	NA
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	1000	NA
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	1000	NA
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	1500	NA
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	1500	NA
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	1000	NA
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	1000	NA
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	1000	NA
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	1000	NA
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	1000	NA
Annex-G-7(AVERAGE BREAKING LOAD)	-	1000	NA
6.1.4(Physical requirement)	-	500	-

Complete

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

19900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 8.1(UTM)	-	1000	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	1500	-
8.18.1 Table 3(Total elongation at maximum force)	-	15000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	1500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	1500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	1500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	1500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	1500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Clause 9.4(Rebend Test)	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	1000	-
4.1(CE)	-	1500	-
4.1( Nb)	-	1500	-
4.1(V)	-	1500	-
4.2(Boron (B))	-	1500	-
4.1( Ti)	-	1500	-
4.1(Cr)	-	1500	-
4.1( Copper %)	-	1500	-
4.1(Ni)	-	1500	-
4.1(Mo)	-	1500	-
4.1( Aluminium %)	-	1500	-
Cl. 6.1(Nominal Size)	-	500	-
Clause 6.3(Effective Cross-sectional Area)	-	500	-
Cl 7.2(Weight)	-	500	-
5.7(PullOut (Bond Test))	-	25000	-

Complete

-
-

IS 210 (2009)

Grey iron castings - Specification (First Revision)

7100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(WORKMANSHIP AND FINISH)	-	500	-
10.1(FREEDOM FROM DEFECTS)	-	500	-
13(SIZE OF TEST BARS-Diameter)	-	500	-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	500	-
16, Table 3(Hardness Test)	-	500	-
17,Annex B(TRANSVERSE TEST)	-	1000	-
18(HYDROSTATIC TEST)	-	3000	-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	1500	-

Complete

-
-

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

5900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	500	-
4(Material)	-	500	-
0.5(Fabrication)	-	500	-
6.1 & Table 1( i) Name of Utensil )	-	500	-
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	1000	-
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	1000	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nitrogen of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Vanadium of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Boron of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Molybdenum of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nickel of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 737)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 6911)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 21)	-	1500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 21)	-	1500	-
5.2( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-	500	-
5.2(Lid Thickness of the finished utensil, mm)	-	500	-
6.1 & Table 1(ii) Shape of Utensil)	-	500	-
6.1 & Table 1( Nominal Size, mm)	-	500	-
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	500	-
6.1 & Table 1(Outside dia Ф NA)	-	500	-
6.1 & Table 1(Height NA)	-	500	-
6.1 & Table 1(Capacity, l NA)	-	500	-
6.1( Minimum sheet thickness for nominal size )	-	500	-
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	500	-
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	500	-
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	500	-
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	500	-
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	1000	-
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	300	-
8.4.4(The film will appear dark grey when wet. )	-	300	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	500	-

Complete

-
-

Bureau of Indian Standards

The National Standards Body of India

Spectro Analytical Labs Private Limited

S-1, GNEPIP Surajpur Industrial Area, Kasna Phase V, Greater Noida, Gautam Buddha Nagar, Gautam Buddha Nagar, Uttar Pradesh, 201308

9873571512 [email protected]

Scope List